tg01 wm6 Update wp7 Bootloader .bin - TG01 Windows Phone 7 Development

TEST use TG-Downloader
WARNING: THIS CAN BRICK YOUR PHONE,I am not responsible if anything bad happens!
If you have Riff Box,you can test this.
If you have not,please do not test.
it can get back to wm6 now ,Cheer
Short pin 1,3 or 0321rom Camera+Power ,on Download mode,use TG-Downloader
tg01 wm6 Update wp7 Bootloader.bin, no os
http://cn.ziddu.com/download/625263/wp7boot.rar.html
demo video
http://cn.ziddu.com/download/625310/wm6-wp7boot.rar.html

we flash this bootloader via tgdownloader with JoolNorets guide?

I think you can flash it like OS, you can use TGdownloader and sdll+.exe . Ask someone that have J-tag box to test it...

Is it possible via qpst or revskill?

NO,please Waiting for the demo video.....
http://cn.ziddu.com/download/625310/wm6-wp7boot.rar.html

Related

xda2

I have bootloader version: 1.03
When I turn on my xda i see only screen:
serial
v1.03
i think that my xda is dead how can i repair this?
I try flash my device using sd but i dont have this option in my bootloader..
You should be able to upgrade your device using the HimaUpgradeUt program. See my post here for information on what to look out for, etc.
I think thats is not good way because i cant connect my device to pc using activesync.. i have only bootloader mode on my xda..
That doesn't matter, the upgrade doesn't need Activesync. It looks after its own connections.
I just connect my xda in bootloader mode to usb. The activesync not saw may device but i run HimaUpgradeUt.exe and my device start upgrade! I have Germany ROM now i upgrade this To same English ROM.. Before i do this that way program show mi error 102.. now its look like everthing be good.. we will see for 5 minutes.
sorry for my english
i am from poland
OK. Let me know what happens.
The program just finish operation.. but on my device screen is still:
Upgrading
radio stack
Please Wait...
I dont know what i should do..?
That's OK. As long as the PC said 'Congratulations' its all done. Take your device out the cradle, hard reset it and it will run the standard setup.
Everythink is great! My Pocket Pc work! Thank You for Your advise.
Maybe somebody know where I can find some Rom to Xda.. Without O2 Rom because i have it. Maybe there is some rom kitchen like for xda 1
Excellent news For information about customising the Extended ROM, search for Extended ROM on the forums.
to dcs: I'm now upgading my o22'Rom from v2.06 to 2.20 (translated frm chinese --> english). after I completed fixing country ID, I have a new erro (erro102: CE image file checksum erro. the Rom image file to be used for the update is corrupt). I try to download again and update but I fail, the erro is 102. please show me hoe to pass this erro.
thank
If u see the log after HimaUpdIt ul see some like this;
16:27:04 Connection with USB
16:27:37 Begin stage 1
16:28:11 End stage 1
16:28:12 Begin stage 2
16:28:12 Write block1
so, he searches for his own connection! Dont worry just download the rom, himaupdit file and upgrade ur xda Tell us how it works

Downgrade Wm6 To Wm5 Urgency Help

Hello
I have a problem with my Prophet and he needs to go to the factory..i need to install wm5 ,i have a wm6 rom and when i downgrade to wm5, the pda goes to bootloader and appears the following window:
ERROR 302 UPDATE ERROR
The Rom Update Utility has encountered communications errors during the update process. The Program will guide you step-by-step to recover from the errors so you can continue with the update!
I have the following advice but it stop´s on bootloader..
Need urgency help! Tks
tiagofa said:
Hello
I have a problem with my Prophet and he needs to go to the factory..i need to install wm5 ,i have a wm6 rom and when i downgrade to wm5, the pda goes to bootloader and appears the following window:
ERROR 302 UPDATE ERROR
The Rom Update Utility has encountered communications errors during the update process. The Program will guide you step-by-step to recover from the errors so you can continue with the update!
I have the following advice but it stop´s on bootloader..
Need urgency help! Tks
Click to expand...
Click to collapse
if u are in Bootloader mode the one in three color mode.. U can downgrade surely with PDA viet temp.
In Boot loader mode just reconnect your device to pc through USB . and launch the PDA VIET program..
It should be work.
doesn´t work..
is there any connection with SD slot card doesn´t work ?.. ?? :S
help.. :S
u r using vista right?
u should do that with xp
be sure that with xp u can fix it 100%
no, i+m using xp.. still doens´t work..
i think my prophet dies :S
try flashing NVID wm5 when in bootloader. if you were successfull flash HardSPL and after that you original ROM!
First, disable any firewall
Put the prophet in bootloader (3-clored screen) by pushing CAM button and punching the reset hole at the bottom. When you realease the stylus, the colors should appear.
Then, before connecting your prophet to the PC, first DISable the "Allow USB connection" option in the connectionsettings box of ActiveSync.
After that connect the bootloadermoded Prophet to your PC, it conects as an ordinairy USB device. Then run the RUU of your choice.
probably the better idea is to send a snapshot of your display in fault mode.
do that with a camera. it could be useful to identify the state of your error.
i'm not skilled but here you can find a pool of powerfull developers.
jork
problem solve
problem.. usb port lol :S

Is Any Solution That Sspl-herm.EXE Can Start With Windows Command??THIS CAN FIX ALL .

Is Any Solution That Sspl-herm.EXE Can Start With Windows Command?? I MEAN I CAN ONLY PUT PUT MY BRICKED TYTN IN BOOTLOADER BAT CAN NOT START SSPL-HERM.EXE BECAUSE NOT WANT TO LOAD ....IS ANY CHANCE TU START Sspl-herm.EXE WITH WINDOWS COMMAND TO CHANGE BOOTLOADER TYTN IN SSPL HERM THEN WE CAN FLASH BRICKED DEVICE!!!??
SO I HOPE THAT SOMEBODY CAN CREATE PATCH FOR THIS THAT SSPL-HERM.EXE CAN START IN WINDOWS THEN CHENGE BOOTLOADER IN HERMES WHEN HERMES CONNECTED WITH USB AND ONLY CAN LOAD BOOTLOADER.....
I MEAN
THAT Sspl-herm.EXE CAN RUN IN WINDOWS AND CHENGE AUTOMATICALY BOOTLOADER IN PHONE WHEN PHONE ONLY CAN RUN BOOTLOADER AND CAN NOT RUN OS...I HOPE THAT YOU UNDERSTAND WHAT I MEAN SORY FOR MY BAD ENGLISH.
When you put your hermes to bootloader, and you plug in usb cable, if the text changes to usb then you should be able to be able to flash any ROM. If you try flashing with SD card, it will work if you can get it to boot loader.
you not read all my post why i ask this because:
I WANT TO UnBrick the Bricked Hermes with "SPL 2.03 - IPL 1.04 - NO GSM - KITL Disabled"
There are many people have this kind of brick but still no solution for it.
I want to ask the mods to make this thread sticky so if anyone find a sulotion for this type of brick would post it Here.
Summary :
IPL: 1.04
SPL: 2.03
CID: NO SUPER CID LEVEL=FFF
NO GSM
KITL Disabled
I have tested all the possible sulotions available in the wiki but none of the could help me unbrick my hermes.
P.S. : Please just post your sulotions here NOT your comments like "you CAN TRY THIS I TRY ALL IN XDA DEVELOPERS", "It's your fault to use telstra wm6"
mbsshop1302gsm said:
Is Any Solution That Sspl-herm.EXE Can Start With Windows Command?? I MEAN I CAN ONLY PUT PUT MY BRICKED TYTN IN BOOTLOADER BAT CAN NOT START SSPL-HERM.EXE BECAUSE NOT WANT TO LOAD ....IS ANY CHANCE TU START Sspl-herm.EXE WITH WINDOWS COMMAND TO CHANGE BOOTLOADER TYTN IN SSPL HERM THEN WE CAN FLASH BRICKED DEVICE!!!??
SO I HOPE THAT SOMEBODY CAN CREATE PATCH FOR THIS THAT SSPL-HERM.EXE CAN START IN WINDOWS THEN CHENGE BOOTLOADER IN HERMES WHEN HERMES CONNECTED WITH USB AND ONLY CAN LOAD BOOTLOADER.....
I MEAN
THAT Sspl-herm.EXE CAN RUN IN WINDOWS AND CHENGE AUTOMATICALY BOOTLOADER IN PHONE WHEN PHONE ONLY CAN RUN BOOTLOADER AND CAN NOT RUN OS...I HOPE THAT YOU UNDERSTAND WHAT I MEAN SORY FOR MY BAD ENGLISH.
Click to expand...
Click to collapse
...you might get more help if you don't use caps lock... as it is, I have no interest past reading the first 3 words.

I can´t change the bootloader of my rw6815

Hello...I have problems with my 6815(with german winmob5) i can´t change the bootloader from this.
i want try to flash a new rom ( this one 3.02.02 from NHOCBANME) with computer and sd-card, now i see that i have the wrong booltloader to flash the ppc, i load the original file from HP, but the procedure brokken (windows 7 on machine (disconnect from ppc))now I don´t know what can I make.
please help me
Ps. I come from Germany has anyone a german rom for my ppc

[Q] common problem-checksum error on 99%

i found out that several people encountered problem with changing bootloader.
i also found out that there is suggestion that this problem is connected to NAND memory bad blocks. So, as i understand it, phone can work well on wm6 or wm6.5 without problem ,but in process of upgrading bootloader may come to light bad sectors and in extreme situation upgrading to such a corupted NAND, can cause dead phone.
But is it for sure problem with bad blocks in NAND memory ?
Isn't it a too common problem ? Maybe the method which we use in some cases will cause a problem ?
In my case i used Mirolg guide and i didn't try another method(Nokser guide is no longer available due to missing files).
With Mirolg guide, when i'm trying upgrade bootloader to wp7bootloader with tg downloader, i get checksum error on 99% while verifying FOTA .
From this moment i can upload wp7 rom ,but after that phone won't start.
And i can go back to wm6.5 bootloader and then upload wm6.5 ROM without problem.
And phone works fine with wm 6.5
So, i have few questions.
Someone, have files which are needed to proceed Nokser method 1 and 2 ?
Anyone know is there a way to check NAND memory for bad sectors ?(for example with mtty) - i just want to confirm that my upgrading problem is caused by bad blocks
NAND chip has bad blocks.This can't erase use riff jtag box!
Depending if these blocks contain no data, or it holds something important, phone may work or no.
If these blocks contain no data or not important,it may work!
If these blocks contain important data,it may not work!
Upgrade bootloader to wp7bootloader have two ways with tg downloader ,
you can Search my Posts ,
If you upload wp7 rom successfu ,but won't start,you may flash all file,all mbn and bin.(NPRG8650.hex /partition.mbn /dbl.mbn /dsp1.mbn /fsbl.mbn /osbl.mbn /amss.mbn /apps.mbn(0) /appsboot.mbn /flash.bin .etc)
You can use ZTEiT Common downloader or other tool (qpst / acer euu etc..)
Good luck!
checksum error
Hello,
The first thing I would like to thank the dev team for its work exelente.
Now to my problem, after flashing the boot loader checksum error occurs.
I have an almost new TG01 by orang Switzerland, I do not think it's broken.
Winmobil 6.5 is no problem to flash.
At the moment running the MIROM 0321radio
Thank you for your efforts
qinwengui said:
Upgrade bootloader to wp7bootloader have two ways with tg downloader ,
you can Search my Posts ,
Click to expand...
Click to collapse
by mentioning two ways of upgrading ,are you talking about this:
"1. wm6 to wp7 bootloader
Short pin 1,3 or 0321rom Camera+Power ,on Download mode,use TG-Downloader
file tg01 wm6 Update wp7 Bootloader.bin, no os" ?
In other words one method is to short pins
and second method is 0321rom Camera+Power
Or i overlooked this another method of upgrading bootloader in your posts?
Is there a way to format or test NAND without JTAG ?
no,http://forum.xda-developers.com/showpost.php?p=18800260&postcount=135
Thanks for help.
First advice was good.
Problem was solved by flashing all files.
You can download missing files here:
http://hotfile.com/dl/148417552/39f77d9/wp7OS_files.zip.html

Categories

Resources