Hello...I have problems with my 6815(with german winmob5) i can´t change the bootloader from this.
i want try to flash a new rom ( this one 3.02.02 from NHOCBANME) with computer and sd-card, now i see that i have the wrong booltloader to flash the ppc, i load the original file from HP, but the procedure brokken (windows 7 on machine (disconnect from ppc))now I don´t know what can I make.
please help me
Ps. I come from Germany has anyone a german rom for my ppc
Related
Hi, I'm trying to flash mda2 but it doesnt seem to work. Atm i got empty device when i turn it on i just have on screen USB 1.02. So can somebody explain me a way how to install windows 2003 english on that device? On that device before it was installed german version but now everything is gone. Device is from t-mobile.
Thanks.
And if is possible to tell me from where i could get files, because on ftp i downloaded qtekk 1.75 radio and ms nbf is fine but nk.rar is broken.
I have a M600 IPL 2.10.0001, SPL 2.10.0001 Current Rom 2.10.1.22WWE, Radio Ver 02.07.20 Protocol 413.1.03. I am trying to update my OS to WM6 using the roms i have found within this amazing site but with no joy, so far all i have been able to do is flash rome back to the original rom of device but without all the M600 spec (like the on screen orientation etc) but i have however been able to add these via cab files which i downloaded with the orange shipping rom but again i was unable to flash the rom also included via the usb update utility as i had done earlier - it seems like every time i try and flash a new rom using either the old or new way as followed exactly i get an error message on my pc and my m600 reverts back to bootloader mode (pretty 3 colour screen) Please please any ideas welcome
VISTA or XP ???
I think Vista have problems regarding RUU...
O/S
VISTA !!! - Thanks for info - any solutions would be much appreciated should one appear - cheers
UPDATE
Just to let you know i have even tried locating ruu file and running as admin as i have had suggested from one of our american friends and still no joy - i will save files to disk and load from another machine with xP for now but if any news breaks re vista please keep me posted - cheers
i had the same problem, so i installed a virtual machine of XP and it works fine
I`ve bricked my touch dual. now in device none CE OS (cus I`ve trying to restore device different methods)
I found original rom - french ( 2 differents rom fr) but when I try to flash it stuck in 0% upgrading and and then in few minutes ending with problem code (lost device connection).
if I try to flash other rom - it stopped in 1% with ID problem cus I didn`t make hardspl...
some propose in my case? please
PS why original rom dont flash in my device?
Using windows xp or vista?
He have a device with CID FR (French)
He havent HardSPL installed!
He have delete his OS Partition? With a Task 32!
Answer ... send it back in warrenty! Or you must wait for a Full French OEM Rom. In the moment i havent see a Rom with your CID!!! Without a Full Rom i doesnt know any way to get it back! Your device isnt realy bricked. With a recounstructed French Rom, you stuck every time on 0% -> CID invalide!
This is why you should always read the "how to" tutorials...
I have a question ... can you look on all French Provider Homepages? Possible they have released a French Nike Rom. You found a Rom ... please share it with me ... publish it!
>With a recounstructed French Rom, you stuck every time on 0% -> CID invalide!
its very pity but I`m also thinks as you...
could I flash a sspl.nb in bootloader mode using mtty? (I`m remember for Trinity was tool that make possibility to load sspl when it`s stuck in bloader )
no?
i will search for a solution ... if trinity can do ... possible nike too
hi,
I have dumped my French SFR rom on my computer (part 0 -1 -2 and 3 raw).
Maybe can i help ?
Tell me what i need to do
upload it via netrunnerat.4shared.com -> upload directory password xda
maybe, but I have a Touch Dual orange.
Cmd>boot
InitDisplay: Display_Chip=1
Fill RSVD information for block 288 to 309
TAG NOT FOUND !!! NOT CLEAR STORAGE !!!
No card inserted
OSSIPreLoad ++
OSSIPreLoad failed, CE is NONE
OEMGetUpdateMode
IPLMSG:0x2:ERROR: Failed to open storage partition.
You have kill your OS partition ... you can be lucky ... your ipl and spl work fine!
Only you can to ... warrenty repair or ask your provider for a Full Rom!! Without that ... i see no hope! If you havent a CID unlocked device ... you can only flash a FR Rom ... but i havent see a rom with this CID!!
Is there anyone who want to tell me how to do this? But step by step! It's SPV C550 with Qtek and WM6-413rom! No such an explanation on this forum about this!
first you must access to bootloader mode in your phone.
next run mtty and enter following commands
info 2
format BINFS
next must to restart your phone and again access to bootloader mode,but don't open mtty!! just run installation of some wm2003 for hurricane (like from qtek8200 or sda II) and its all
sorry for pure english
and where is a original 2003 ROM?
I have the one rom on russian(8200 qtek), but is there somethinn' on english?
I will be greatfull for someone put a link to it!? I NEED THAT ROM!
The russian qtek ROM can be set to the english, but i'm not 100% sure about that.
yes it's tru. russian rom support english language
Help! When i try to format in mtty i type "format ALL" and put SDA II rom(and it's same with qtek 8200)! And then this message lightis on "Data crash, connect your service"?! (i was pissed because it's didn't work in regular way to put WM6, so i typed this command)! I trying to put patched SPL to foramt again (with "format BINFS" command) but seems to be that is not posible! :S (sry for english) phone is working, boot is working too... Is there way to back in my phone or i break it!? i need answer very quickly so know to buy a new one!
Hy to all, first of all thank to everyone that put time and pacience in this hobby. I want to anticipate that I've been hours to search an answer before posting, but my result was not good for me. I hope that someone tells me I'm stupid and I can find my solution in that thread (this means I'm quite close to the end of my problem).
History
X7500 upgraded to HTC 6.0 original rom
unlocked my athena with olipro unlocker (thanks to olipro) to 1.20 (from 1.10).
upgraded my radio from 1.50 to 1.58.
flashed my rom with micky's 6.1 italian rom.
I had problem with language: italian rom appeared me as english and I couldn't change to italian.
I decide to go to michy's italian rom page and download 1.15 rom.
from another computer now I try to change my rom but............
after starting the bootloading (spb 1.20 olipro appears so it's unlocked) the device disconnect from activesync and usb and no upgrade is possible. It appears me the request for new hardware information driver needed (as my pc doesn't recognize athena in bootloader mode). So... no connection and no upgrade. I've tried to launch other upgrades (rom and unlocker) but still the same. Where am I wrong? is it something related to the pc or to the athena? thanks in advance to whom will answer me.
so? 70 readers a noone that write try this ot that?
Woow!!!
I normally use SDcard to flash because the usb port on my unit is not detected properly. Since you already have SPL 1.20-Olipro, you can easily revive yours.
Just follow these steps:
1 - format your SDcard with FAT32 (use windows explorer on your PC)
2 - extract any wm6/6.1 spl 1.xx rom you want to flash and copy all files into your SDcard
3 - rename the RUU_signed.nbh to atheimg.nbh
4 - put the SDcard into your unit and boot the device into bootloader mode (or you can simply click Enterbootloader.exe if you can use file explorer on the device)
5 - after you finish flashing and the screen shows 'Restore OK' .. remove SDcard first before you reset the device. Sometimes need to plug out the battery or reset twice or do hard reset before the unit will boot again into OS.