Hi, I'm trying to flash mda2 but it doesnt seem to work. Atm i got empty device when i turn it on i just have on screen USB 1.02. So can somebody explain me a way how to install windows 2003 english on that device? On that device before it was installed german version but now everything is gone. Device is from t-mobile.
Thanks.
And if is possible to tell me from where i could get files, because on ftp i downloaded qtekk 1.75 radio and ms nbf is fine but nk.rar is broken.
Related
Please guide me to upgrade my Siemens SX-56 from Pocket PC 2002 Versions ROM Version 3.17.03
Is it ok to upgrade it to Windows Mobile 2003 Second Edition ROM Version 3.04.00
I have downloaded Windows Mobile 2003 Second Edition ROM Version 3.04.00 from the following site:
http://wiki.xda-developers.com/index.php?pagename=ROMVersions&version=5
Its an EXE file. Do I copy it in my SD card and run it from there or Directly from Computer.
If Windows Mobile 2003 Second Edition ROM Version 3.04.00 is not a good option please suggest which version will be the best.
Thanks
Aamer Sheikh
I would suggest you use the 4.01.12 ROM since the WM2003 SE has some "little problems". I think this is the most functional (English) ROM for teh XDA.
Just download the exe file. connect your device to your PC via ActiveSync and run the exe file on your PC. Then just follow the instructions...
HTH
Stefan
Well, i do suggest wm2003se...for me it is faster than wm2003, it has screen rotation, and it does not wipes out your SD-card.
Thank You LumpiStefan & KTamas
I have upgraded my Rom to wm2003se (3.04.00_ENG) so far it seems to be working fine
and yes KTamas you are right it seems to be more faster than the previous version.
I have a quick question.
Am trying to load all my previous softwares but am getting the message that the software may not display properly. Do i need to download all the softwares again for WM2003.
Another Q i dont seem to find MMS Composer on this WM2003SE. Do I need to install that seperately?
Thanks to Both of you for Helping me out
Regards
Aamer Sheikh
aamer said:
I have a quick question.
Am trying to load all my previous softwares but am getting the message that the software may not display properly. Do i need to download all the softwares again for WM2003.
Click to expand...
Click to collapse
You don't have to worry about this message. It says that the software MAYBE not works well in landscape mode.
aamer said:
Another Q i dont seem to find MMS Composer on this WM2003SE. Do I need to install that seperately?
Click to expand...
Click to collapse
Yes, you have to install it seperatelly.
After Update to WM2003SE the only problem I have is that Infra Transfer is not working.
Neither I can send or Receive any file via Infra Beam.
Tried once to Downgrade it to the orignaly installed version but still no use. it still dont work.
is there any driver or software which can resolve this issue.
please do note it does detect any phone i try to send file via infra beam. but it says FAILED.
Await your Reply
Aamer
Infrared worked for me fine. Tried it just in the moment between to XDA´s. Ohne have WM2003SE and the other one PPC2002.
Transfer worked in bothe directions without any problem....
Stefan
Mine is not working at all
is there any software u can suggest that i should install
which cud solve the problemo
you did renember to turn on recieve all beam files in connection right ?
LumpiStefan said:
Infrared worked for me fine. Tried it just in the moment between to XDA´s. Ohne have WM2003SE and the other one PPC2002.
Transfer worked in bothe directions without any problem....
Stefan
Click to expand...
Click to collapse
I had no probs either.
yes i did turn it on.
is it possible that the bootloader is messed-up?
aamer
aamer said:
yes i did turn it on.
is it possible that the bootloader is messed-up?
Click to expand...
Click to collapse
Nomrally infrared has nothing to do with the bootlaoder, so i don't believe it. And you said, that the infrared is working and just the transfer failed....
But i've got no solution how to fix that problem...
Stefan
I just got an Siemens x56 off e-bay, it's unlocked and has wm2002. I'm looking to upgrade so that i can run the iphone skin/theme. Any suggestions as to what ROM i should upgrade to? I downloaded the bootloader but i'm not sure what Rom. It's AT&T branded but i'm using a cellphone company that not many people have heard of it's called UNICEL (they were just purchased by verizon).
ANY HELP ANYONE CAN GIVE IS GREATLY APPRECIATED.
THANKS A BUNCH
~nick
dont know anything about iphone skins as i find them as cool as fake tits
but 2003SE from here is pretty new guess thats a good bet
http://www.romkitchen.de/
Do you know the difference between wm2003SE and 2003 Final?
WM2003 final is just WM 2003 and WM2003SE is the SE-Version including the possibility to rotate the screen. For production use I suggest the WM2003 Final Version
Stefan
Ok, so i got the phone in the mail. It has
rom version 3.17.03 ENG
radio version A.20.10
Protocol version: 324e4
Model No.: PW10A1
IMEI:350314010360924
I put my sim card in and get no signal. Also, i found out i can't use active sync because i've got windows vista. however, windows vistas "windows mobile device center" only supports mobile version 2003 and up. I belive mine has one of the xda-developers versions of windows mobile.
I have an SD card reader so i can copy files directly to the card but i'm unsure how to boot the x56 to the card so i can install wm2003. My cell phone provider is a smaller company called "Unicel" they were just purchased by Verizon.
SOrry i'm such a newb. I really appreciate any help
http://wiki.xda-developers.com/index.php?pagename=Wallaby_HT_FlashSD
have to use xdatools to get the rom to the sd in the right format
xdatools tells me i have to have Activesync running. Activesync doesn't run on vista.
i guess it have to be don from a xp box then
surely you can get access to one or dual boot beside the vista
ok, i was able to use a friends laptop and get wm2003 final installed (thanks to lumpistefan's rom kitchen) I had a program that was on the x56 when i got it that was a GSM freq selector. needless to say that program is now gone and i can't get my phone to work. Does anyone know where i can download this program or if there's an other way i can change the frequency?
Thanks for all the help so far guys.
ok, so i read in the wiki about how to change the band by doing a soft reset to the bootloader. However upon further research i've found that my lame cell company runs on GSM 890. Does anyone know how i can get my phone to 890?
Hi people,
I'm Luca from Italy, and I'm writing here hoping that You can help me to recover my dead PPC.
My PPC, when living, had Windows Mobile 5 like O.S.
So, As i've some problems with the phone I've decided to downgrade the radio version from 1.17 (people say that it is buggy) to 1.08.
So i run the HimaUpgradeUt_noID (I've also HimaUpgradeUt), but i've forgotten to delete the NK.nbf file from the directory.
I put the PPC in bootloader mode (SERIAL on top and ver. 1.06 on bottom) and then to the cradle directly to the motherboard USB connector
The sofware begin to update upgrading even ROM CE file, but when it arrived at 31% himaUpgrade stopped its work, showing that I need to reset (only normal reset and not soft reset) the PPC From this time until now my PPC show always and only the bootloader view.
When I try to upgrade again, the himalaya soft don't show what my PPC has like rom or radio version. It shows only the Ce rom and Radio that I'm going to ugrade.
It seems that software isn't able to erase ROM IMAGE
Active sync can't identify the device (some time it is indentified as unknown device).
When i start the software for ugrade the Active sync tray icon disappear.
I'm only able to ugrade radio stack or ExtRom.
PLEASE PLEASE PLEASE, HELP ME.
P.S. The device is unlocked
2 hits
http://www.expansys-kr.com/ft.aspx?k=21161
"Edited:- Problem solved, I loaded the upgrade from a different PC. I don't know why my main PC would not work as that is the one I regularly sinc the pocket PC to, but it just kept aborting the upgrade. Anyone else having this problem, try another PC."
if you're lucky
http://forum.xda-developers.com/sho...t=Failing+ROM+Update+Jam.+Error+112+CE+Failed
"it was stoping with an upgrade error at the very beggining of the extended ROM flashing no matter which ROM you were flashing to it! At the end they exchanged it for a new one, probably the ROM chip was faulty!"
if you're unlocky
Hi Rudegar,
first MANY MANY MANY THANKS for Your support.
I'm very unlucky.
I'm not able to upgrade my PPC.
The strange thing is that i can upgrade Radio Stack and even Extended Rom!
Only CE ROM wont' update.
Previous CE ROM installed was AKU 3.5 and Windows Mobile 5.0
Everythings worked fine.
Non other way?
I've seen that after launched del himaupgradeUt_noID the Activesync tray icon ho away.
My PPC sometimes ins't "seen" by my XP while other times it is "unknown device"
Why Can I only update RADIO and Extended Rom, while CE Rom not?
... P.S.
evey kind of button that I push the PPC is always in Bootloader Mode!
I'ev tryed: POWER + CAMERA + REC + STYLUS over the hole.
When I put the PPC to battery charger, red led is on until nothing is on the display, while when there is the written over the display, led is off.
No way to help me?
No news? I'm so sad
hello. i have the same problem but i have some suspections: i have 3 wersions of wm6 roms. one weight is 64 mb and others 32. and i tkink we are trying install rom from htc, dell or ipaq to our mda or other... so- **** this wrong rom and search for normal rom for himalaya ->
take this one :
"
mirror in china ,but very rapid downloading
http://exs.mail.qq.com/cgi-bin/downl...3f0dd183418032
enter the code e506cd02 then go
thx to c_shekhar
"
screenshots: wm6 pro. : http://www.engadget.com/photos/windows-mobile-6-professional/
cheers
Hello everybody...
I just bought an PM200 (German T-Mobile Edition), WM5 says its a PM200.
After that I installed the aku 3.3 and everything worked fine...
Then I tried to install the "Charmer_Touch_GER_Ridingshark_Beta_3.2".
But while Writing the new TouchFLOW OS ROM i got the error... "Could not update itsutils.dll to the current version, maybe it is in use?
try restarting your device, or restart activesync
But i realized it to late and already made a Hard Reset...
Then the Touch-Flow UI tried to install and the i got the WM error:
"The file : \windows\XDADev_BatFix.exe does not exist".
But i cant go on with the install but it doesnt matter which button i push...no one responds...
Then i downloaded the XDADEV_Batfix.cab but that dowsnt work...sure because it isnt the exe file...
Can anybody help me with tha prob?
I also treid to install the WM6 update again but i always get the itsutils.dll error...
Geetings to all
Markus
Here is how to do it:
Flash back to WM5 using bootloader. Press camera button during reset.
If you see the screen with the 3 colours plug in the USB cable and wait till the Device is installed. Now run the T-Mobile uptade (Best is to use Akku3.3).
After it is finished connect to active sync and go to the Folder were the WM 6 upgrade is in. Now install the two cabs out of the folder where the WM6 ROM is in, on your device and make a soft reset. After that run the upgrade File. It will go same as before, but there will be no error and it will update completly.
Have a nice time with WM6
ChrBeck
Can i writ you a pm, it will be much better for me to write you in german...
In der PM in Deutsch geantwortet.
Answered in German in a PM.
Ok, the prob is solved.
I just want to write it down here, if anybody has the same prob...
Thanks again to ChrBeck, I also used the search in this Forum to get it solved but i could find anything useful.
The only thing I had to do was to install the to cab´s (Cert_SPCS.cab and EnableRapi.cab witch are already included in the Charmer_Touch_GER_Ridingshark_Beta_3.2.rar.
The first Step was to update the WM5 Version to the aku 3.3. Then I transmitted the 2 Files with activeSync and installed them on the Charmer just with thip on each File. And the last Step was to flash the new WM6...
DONE....
Its so easy if you know what to do and with help from some users...
Greetings MArkus
This is the thing I have written before. But it is not easy to understand, if you don't know much about it.
@all: And now much fun with WM.
Have a nice day
ChrBeck
Hello...I have problems with my 6815(with german winmob5) i can´t change the bootloader from this.
i want try to flash a new rom ( this one 3.02.02 from NHOCBANME) with computer and sd-card, now i see that i have the wrong booltloader to flash the ppc, i load the original file from HP, but the procedure brokken (windows 7 on machine (disconnect from ppc))now I don´t know what can I make.
please help me
Ps. I come from Germany has anyone a german rom for my ppc