I'm compiling a kernel for the I9100G. I've downloaded the latest source from Samsung and added some drivers that were missing from the package. After a few tries, I managed to get my phone to boot. Everything seems to be working except for Wifi.
The symptom: Every time I turn on the Wifi it seems to scan for a few seconds, but then turns itself off. Here's a snippet of the logcat covering the time I try to turn on the wifi:
Code:
D/WifiService( 1679): setWifiEnabled: true
D/WifiService( 1679): ****************setWifiEnabled(), allowWifi****************true
E/WifiSettingButton( 1791): onReceive()-S:2
I/WifiHW ( 1679): [WIFI] Load Driver
E/WifiHW ( 1679): module is samsung
I/WifiHW ( 1679): [WiFi.c] insmod() Start!!
I/WifiHW ( 1679): [WiFi.c] start init_module() Start!!
V/WifiSettings( 3177): resetRetryDialogVariable
I/ActivityManager( 1679): Start proc com.schwimmer.android.wifistatus for broadcast com.schwimmer.android.wifistatus/.WifiStatusReceiver: pid=3569 uid=10452 gids={1015}
I/StatusBarManagerService( 1679): ADD-null , 0x7f020000
D/Beautiful Widgets( 1835): WIFI_STATE_CHANGED_ACTION
I/WindowOrientationListener( 1679): orientation = 5.365884 Tilt = 53.00611 -- 0 , 5 , 7
W/DiskCache( 3540): rename to = /mnt/sdcard/Android/data/com.cooliris.media/cache/local-meta-cache/index
I/CacheService( 3540): Preparing DiskCache for all thumbnails.
D/dalvikvm( 3442): GC_CONCURRENT freed 339K, 46% free 3414K/6215K, external 0K/512K, paused 2ms+2ms
W/DiskCacheSEC( 3540): enter writeIndex 106
W/DiskCacheSEC( 3540): Create TempFile = /sdcard/DiskCacheIndex-1409040773.tmp
V/DiskCacheSEC( 3540): [SE Lab.] writeindex(): id= -1119846364 / mntTime= 1317589132716
V/DiskCacheSEC( 3540): [SE Lab.] writeindex(): id= 2052120067 / mntTime= 1319028831430
V/DiskCacheSEC( 3540): [SE Lab.] writeindex(): id= 1149784819 / mntTime= 1319824382708
V/DiskCacheSEC( 3540): [SE Lab.] writeindex(): id= 338429904 / mntTime= 1319824382707
D/DiskCacheSEC( 3540): Wrote index with 106 records.
W/DiskCacheSEC( 3540): rename to = /mnt/sdcard/Android/data/com.cooliris.media/cache/local-image-thumbs/index
I/TIMECHECK( 3540): END thumbnails.
I/ActivityManager( 1679): No longer want com.mediawoz.goweather (pid 3301): hidden #26
D/Tethering( 1679): eth0 is not a tetherable iface, ignoring
I/WifiHW ( 1679): [WIFI] DRIVER OK
I/WifiHW ( 1679): wifi_start_supplicant: Enter
D/WifiHW ( 1679): /data/wifi/bcm_supp.conf exits
I/WifiHW ( 1679): wifi_start_supplicant: Exit. supp_status=running
W/WifiService( 1679): ---- Check wifi direct setting. It is unchecked.
I/WifiHW ( 1679): wifi_connect_to_supplicant: enter
I/WifiHW ( 1679): wifi_connect_to_supplicant: supp_conn_status(transit)
E/WifiHW ( 1679): Unable to access IFACE_DIR /No such file or directory
E/WifiHW ( 1679): wifi_connect_to_supplicant: ifname(eth0)
I/wpa_supplicant( 3592): Interface eth0 set UP - success
V/SettingsProvider( 1679): secure <- value=1 name=wifi_on
V/SettingsProvider( 1679): property: sys.settings_secure_version=1
V/SettingsProvider( 1679): notifying: content://settings/secure/wifi_on
E/WifiSettingButton( 1791): onReceive()-S:3
E/AlarmManagerService( 1679): android_server_AlarmManagerService_set to type=2, 121.781000000
E/wpa_supplicant( 3592): Failed to initialize control interface 'eth0'.
E/wpa_supplicant( 3592): You may have another wpa_supplicant process already running or the file was
E/wpa_supplicant( 3592): left by an unclean termination of wpa_supplicant in which case you will need
E/wpa_supplicant( 3592): to manually remove this file before starting wpa_supplicant again.
I/wpa_supplicant( 3592): CTRL-EVENT-STATE-CHANGE id=-1 state=0 BSSID=00:00:00:00:00:00
E/WifiHW ( 1679): wifi_connect_to_supplicant:ctrl_conn is NULL!!
I/WindowOrientationListener( 1679): orientation = 4.798251 Tilt = 53.126266 -- 0 , 5 , 8
E/WifiHW ( 1679): wifi_connect_to_supplicant:ctrl_conn is NULL!!
E/WifiHW ( 1679): wifi_connect_to_supplicant:ctrl_conn is NULL!!
E/WifiHW ( 1679): wifi_connect_to_supplicant:ctrl_conn is NULL!!
E/WifiHW ( 1679): wifi_connect_to_supplicant:ctrl_conn is NULL!!
E/WifiHW ( 1679): wifi_connect_to_supplicant:ctrl_conn is NULL!!
E/WifiHW ( 1679): wifi_connect_to_supplicant:ctrl_conn is NULL!!
E/WifiHW ( 1679): wifi_connect_to_supplicant:ctrl_conn is NULL!!
E/WifiHW ( 1679): wifi_connect_to_supplicant:ctrl_conn is NULL!!
E/WifiHW ( 1679): wifi_connect_to_supplicant:ctrl_conn is NULL!!
E/WifiHW ( 1679): wifi_connect_to_supplicant:ctrl_conn is NULL!!
I/WindowOrientationListener( 1679): orientation = 4.523258 Tilt = 53.586506 -- 0 , 5 , 8
E/WifiHW ( 1679): wifi_connect_to_supplicant:ctrl_conn is NULL!!
E/WifiHW ( 1679): wifi_connect_to_supplicant:ctrl_conn is NULL!!
E/WifiHW ( 1679): wifi_connect_to_supplicant:ctrl_conn is NULL!!
E/WifiHW ( 1679): wifi_connect_to_supplicant:ctrl_conn is NULL!!
E/WifiHW ( 1679): wifi_connect_to_supplicant:ctrl_conn is NULL!!
E/WifiHW ( 1679): wifi_connect_to_supplicant:ctrl_conn is NULL!!
E/WifiHW ( 1679): wifi_connect_to_supplicant:ctrl_conn is NULL!!
I/StatusBarPolicy( 1791): onDataActivity-D:0
E/WifiHW ( 1679): wifi_connect_to_supplicant:ctrl_conn is NULL!!
E/WifiHW ( 1679): wifi_connect_to_supplicant:ctrl_conn is NULL!!
D/dalvikvm( 2999): GC_CONCURRENT freed 219K, 46% free 3166K/5831K, external 0K/0K, paused 2ms+3ms
E/WifiHW ( 1679): wifi_connect_to_supplicant:ctrl_conn is NULL!!
E/WifiHW ( 1679): wifi_connect_to_supplicant:ctrl_conn is NULL!!
E/WifiHW ( 1679): wifi_connect_to_supplicant:ctrl_conn is NULL!!
E/WifiHW ( 1679): wifi_connect_to_supplicant:ctrl_conn is NULL!!
E/WifiHW ( 1679): wifi_connect_to_supplicant:ctrl_conn is NULL!!
E/WifiHW ( 1679): wifi_connect_to_supplicant:ctrl_conn is NULL!!
E/WifiHW ( 1679): wifi_connect_to_supplicant:ctrl_conn is NULL!!
E/WifiHW ( 1679): wifi_connect_to_supplicant:ctrl_conn is NULL!!
E/WifiHW ( 1679): wifi_connect_to_supplicant:ctrl_conn is NULL!!
E/WifiHW ( 1679): wifi_connect_to_supplicant:ctrl_conn is NULL!!
E/WifiHW ( 1679): wifi_connect_to_supplicant: Unable to open connection to supplicant on "eth0": No such file or directory
D/WifiSettings( 3177): updateAccessPoints(), WifiConfigureation list updated
D/WifiSettings( 3177): updateAccessPoints(), ScanResult list updated
V/WifiSettings( 3177): resetRetryDialogVariable
Here's a snippet of the dmesg log:
Code:
4>[ 122.551971] wlan_setup_power: on
<7>[ 122.552001] wlan_setup_power: wlan enable GPIO value(104)=1
<4>[ 122.552032] omap_hsmmc_force_presence_change_for_wlan: enter
<7>[ 122.552093] omap_hsmmc_force_presence_change_for_wlan: mmc detect change called, omap_hsmmc_host_pub=ee207e40
<4>[ 122.554626]
<4>[ 122.554626] Dongle Host Driver, version 5.90.100.133 (WFD)
<4>[ 122.554656] Compiled in drivers/net/wireless/bcm4330/src on Oct 29 2011 at 13:35:55
<3>[ 122.591705] cpu_up CPU1: Booted secondary processor
<6>[ 122.756225] omap4_duty_enter_heating enter at ()
<4>[ 123.091857] [MMC] IRQ Status is 18000
<4>[ 123.097167] [MMC] IRQ Status is 18000
<4>[ 123.106048] [MMC] IRQ Status is 18000
<4>[ 123.121765] mmc2: queuing unknown CIS tuple 0x80 (7 bytes)
<4>[ 123.166748] mmc2: queuing unknown CIS tuple 0x80 (3 bytes)
<6>[ 123.179382] mmc2: new high speed SDIO card at address 0001
<4>[ 123.183563] dhd_customer_oob_irq_map: customer specific Host GPIO number is (81), flag=0x2
<4>[ 123.184020] F1 signature read @0x18000000=0x16834330
<4>[ 123.188293] DHD: dongle ram size is set to 294912(orig 294912)
<4>[ 123.188415] CHIP VER = [3]
<4>[ 123.221405] dhdsdio_download_nvram: firmware image path = /system/etc/wifi/bcm4330_sta.bin
<4>[ 123.221466] dhdsdio_download_nvram: nvram vars file path = /system/etc/wifi/nvram_net.txt
<4>[ 123.222259] dhdsdio_write_vars: Download, Upload and compare of NVRAM succeeded.
<4>[ 123.412200] MAC (OTP) : [78:D6:F0:A5:45:00]
<4>[ 123.412231] MAC (FILE): [78:D6:F0:A5:45:00] [1]
<4>[ 123.412933] Firmware version = wl0: Aug 19 2011 10:29:30 version 5.90.100.270 (BTAMP WFD)
<4>[ 123.412963]
<4>[ 123.415222] POWER_VAL = 1
<4>[ 123.482330] ABB: TRANXDONE timed out waiting for OPP change
<4>[ 123.496215] dhd_preinit_ioctls: KEEP Alive time is 45s
<4>[ 123.498992] eth0: Broadcom Dongle Host Driver MAC=78:D6:F0:A5:45:00
<4>[ 123.499053] Enter wl_control_wl_start
<4>[ 123.499084] Exited wl_control_wl_start
<4>[ 123.501770] wl_iw_iscan_set_scan_broadcast_prep: First Brodcast scan was forced
<4>[ 123.503845] +++: Set Broadcast ISCAN
<4>[ 123.581146] eth0: SIOCSIWMODE MODE 2
<4>[ 123.581176] eth0: SIOCSIWMODE MODE 2 SSS
<4>[ 123.581512] eth0: SIOCSIWCOMMIT
<4>[ 123.581878] eth0: SIOCGIWRANGE
<4>[ 123.584228] eth0: SIOCGIWMODE
<4>[ 123.584808] eth0: SIOCSIWAP
<4>[ 123.591796] ABB: TRANXDONE timed out waiting for OPP change
<4>[ 123.607147] eth0: SIOCSIWAUTH, IW_AUTH_WPA_ENABLED(7), paramval = 0x1
<4>[ 123.607177] eth0: SIOCSIWENCODEEXT
<4>[ 123.607635] eth0: SIOCSIWENCODEEXT
<4>[ 123.608001] eth0: SIOCSIWENCODEEXT
<4>[ 123.608337] eth0: SIOCSIWENCODEEXT
<4>[ 123.608703] eth0: SIOCSIWAUTH, IW_AUTH_TKIP_COUNTERMEASURES(4), paramval = 0x0
<4>[ 123.609222] eth0: SIOCSIWAUTH, IW_AUTH_DROP_UNENCRYPTED(5), paramval = 0x1
<4>[ 123.618835] eth0: SIOCSIWAUTH, IW_AUTH_WPA_ENABLED(7), paramval = 0x0
<4>[ 123.619659] eth0: SIOCSIWAUTH, IW_AUTH_DROP_UNENCRYPTED(5), paramval = 0x0
<4>[ 123.620025] eth0: SIOCSIWAUTH, IW_AUTH_TKIP_COUNTERMEASURES(4), paramval = 0x0
<4>[ 123.647033] eth0: SIOCGIWMODE
<4>[ 123.647613] eth0: SIOCSIWAP
<4>[ 124.594421] Enter wl_control_wl_start
<4>[ 124.594482] Exited wl_control_wl_start
<4>[ 124.598785] Send Event ISCAN complete
From what I can gather, it seems the wifi driver managed to load itself up, however, it failed to connect to the supplicant service and then was turned off. Can someone please tell me what is happening and how I can fix it? Thanks in advance.
Never mind, I solved the problem. Turned out my init.rc was missing a couple of lines.
Any chance of getting a copy of your kernel?
Was wondering if you could jack up the charge rate in the kernel to around 2A. As I understand the charge rate for GS2s are limited by the kernel to 660ma regardless of the type of AC charger used. It's even worse when you plug it into a computer USB port. By jacking up to 2A we can take advantage of the faster chargers available on the market. For example the iPad charger puts out 5.1v, 2.1Amps. This would greatly reduce the time needed to charge the battery.
Related
Hi..
Sorry about double post. I got some problems with Wireless on my Galaxy S2. Problem is, i cant turn it on. After i try to turn it on phone gets laggy. Sometimes it turns on, does the scan (doesn't show AP) and turns off. sometimes after some time it shows up "Error" under Wireless state. Problem appeared before phone where rooted. Never been droped or something like that. Before rooting by entering *#*#232338#*#* i where unable to see MAC Adress, after rooting can see MAC Address. But wireless doesnt work (Wireless/Wireless tether). Any ideas how to solve it? Have seen ppls on forum have same problem. Solution to reinstall radio drivers. Anyone can guide me how to do it? Baseband I9100XXKI1, Kernel 2.6.35.7-I9100XXKI4-CL575468 [email protected] #2, Build number GINGERBREAD.XWKI4
Have tried wipe cache, did factory reset.
Thanks for any advice.
Have Google something, but don't know how to use that info i fount. Here is the trick should fix it, but no explanation about how to do it.
Problem is related to wpa_supplicant crash issue..
That post is just stating that you need those .so files from a stock firmware pushed into your system/etc/ folder.
Sent from my GT-I9100 using xda premium
Any Ideas how to solve this issue? Phone without Internet is pretty much the same as pc..
Here is CatLog when i start WiFi
Code:
01-01 21:54:56.265 E/WifiSettingButton(2936): activate()
01-01 21:54:56.265 E/AudioPolicyManager(2589): getParamFromPolicy
01-01 21:54:56.265 E/AudioPolicyManager(2589): getSituationVolume
01-01 21:54:56.270 E/yamaha::media::Parameters(2589): SalesCode = XEU
01-01 21:54:56.280 E/WifiHW (2809): Cannot open "/data/.cid.info": No such file or directory
01-01 21:54:56.305 E/WifiSettingButton(2936): onReceive()-S:2
01-01 21:54:58.500 E/lights (2809): write_int: path /sys/devices/virtual/misc/melfas_touchkey/brightness, value 2
01-01 21:55:00.769 E/WifiHW (2809): wifi_start_supplicant: pi->serial=117440514, serial=0
01-01 21:55:00.795 E/WifiHW (2809): wifi_connect_to_supplicant:IFACE_DIR(/data/misc/wifi), iface(eth0), ifname(/data/misc/wifi/eth0)
01-01 21:55:00.795 E/WifiHW (2809): wifi_connect_to_supplicant: ifname(/data/misc/wifi/eth0)
01-01 21:55:00.950 E/WifiSettingButton(2936): onReceive()-S:3
01-01 21:55:00.970 E/wpa_supplicant(6703): ioctl[SIOCGIFFLAGS]
01-01 21:55:00.995 E/WifiHW (2809): wifi_connect_to_supplicant:ctrl_conn is NULL!!
01-01 21:55:00.995 E/wpa_supplicant(6703): ioctl[SIOCGIFFLAGS]
01-01 21:55:01.020 E/wpa_supplicant(6703): ioctl[SIOCGIFFLAGS]
01-01 21:55:01.045 E/wpa_supplicant(6703): ioctl[SIOCGIFFLAGS]
01-01 21:55:01.055 E/wpa_supplicant(6703): ioctl[SIOCGIFFLAGS]
01-01 21:55:01.080 E/wpa_supplicant(6703): ioctl[SIOCGIFFLAGS]
01-01 21:55:01.080 E/wpa_supplicant(6703): ioctl[SIOCGIFFLAGS]
01-01 21:55:01.080 E/wpa_supplicant(6703): ioctl[SIOCGIFFLAGS]
01-01 21:55:01.080 E/wpa_supplicant(6703): ioctl[SIOCGIFFLAGS]
01-01 21:55:01.085 E/wpa_supplicant(6703): ioctl[SIOCGIFFLAGS]
01-01 21:55:01.095 E/WifiHW (2809): wifi_connect_to_supplicant:ctrl_conn is NULL!!
01-01 21:55:01.125 E/wpa_supplicant(6703): ioctl[SIOCSIWPMKSA]
01-01 21:55:01.135 E/wpa_supplicant(6703): ioctl[SIOCSIWMODE]
01-01 21:55:01.140 E/wpa_supplicant(6703): ioctl[SIOCGIRANGE]
01-01 21:55:01.155 E/wpa_supplicant(6703): ioctl[SIOCGIWMODE]
01-01 21:55:01.165 E/wpa_supplicant(6703): ioctl[SIOCSIWAP]
01-01 21:55:01.185 E/wpa_supplicant(6703): ioctl[SIOCSIWENCODEEXT]
01-01 21:55:01.185 E/wpa_supplicant(6703): ioctl[SIOCSIWENCODE]
01-01 21:55:01.185 E/wpa_supplicant(6703): ioctl[SIOCSIWENCODEEXT]
01-01 21:55:01.185 E/wpa_supplicant(6703): ioctl[SIOCSIWENCODE]
01-01 21:55:01.185 E/wpa_supplicant(6703): ioctl[SIOCSIWENCODEEXT]
01-01 21:55:01.185 E/wpa_supplicant(6703): ioctl[SIOCSIWENCODE]
01-01 21:55:01.185 E/wpa_supplicant(6703): ioctl[SIOCSIWENCODEEXT]
01-01 21:55:01.185 E/wpa_supplicant(6703): ioctl[SIOCSIWENCODE]
01-01 21:55:01.185 E/wpa_supplicant(6703): Failed to disable WPA in the driver.
01-01 21:55:01.185 E/wpa_supplicant(6703): ioctl[SIOCGIWMODE]
01-01 21:55:01.185 E/wpa_supplicant(6703): ioctl[SIOCSIWAP]
01-01 21:55:01.185 E/wpa_supplicant(6703): ioctl[SIOCGIFFLAGS]
01-01 21:55:01.205 E/WifiHW (2809): wifi_connect_to_supplicant:ctrl_conn is NULL!!
01-01 21:55:01.310 E/WifiHW (2809): wifi_connect_to_supplicant:ctrl_conn is NULL!!
01-01 21:55:01.410 E/WifiHW (2809): wifi_connect_to_supplicant:ctrl_conn is NULL!!
01-01 21:55:01.510 E/WifiHW (2809): wifi_connect_to_supplicant:ctrl_conn is NULL!!
01-01 21:55:01.610 E/WifiHW (2809): wifi_connect_to_supplicant:ctrl_conn is NULL!!
01-01 21:55:01.710 E/WifiHW (2809): wifi_connect_to_supplicant:ctrl_conn is NULL!!
01-01 21:55:01.810 E/WifiHW (2809): wifi_connect_to_supplicant:ctrl_conn is NULL!!
01-01 21:55:01.910 E/WifiHW (2809): wifi_connect_to_supplicant:ctrl_conn is NULL!!
01-01 21:55:02.010 E/WifiHW (2809): wifi_connect_to_supplicant:ctrl_conn is NULL!!
01-01 21:55:02.110 E/WifiHW (2809): wifi_connect_to_supplicant:ctrl_conn is NULL!!
01-01 21:55:02.215 E/WifiHW (2809): wifi_connect_to_supplicant:ctrl_conn is NULL!!
01-01 21:55:02.315 E/WifiHW (2809): wifi_connect_to_supplicant:ctrl_conn is NULL!!
01-01 21:55:02.415 E/WifiHW (2809): wifi_connect_to_supplicant:ctrl_conn is NULL!!
01-01 21:55:02.515 E/WifiHW (2809): wifi_connect_to_supplicant:ctrl_conn is NULL!!
01-01 21:55:02.615 E/WifiHW (2809): wifi_connect_to_supplicant:ctrl_conn is NULL!!
01-01 21:55:02.715 E/WifiHW (2809): wifi_connect_to_supplicant:ctrl_conn is NULL!!
01-01 21:55:02.815 E/WifiHW (2809): wifi_connect_to_supplicant:ctrl_conn is NULL!!
01-01 21:55:02.920 E/WifiHW (2809): wifi_connect_to_supplicant:ctrl_conn is NULL!!
01-01 21:55:03.020 E/WifiHW (2809): wifi_connect_to_supplicant:ctrl_conn is NULL!!
01-01 21:55:03.120 E/WifiHW (2809): wifi_connect_to_supplicant:ctrl_conn is NULL!!
01-01 21:55:03.220 E/WifiHW (2809): wifi_connect_to_supplicant:ctrl_conn is NULL!!
01-01 21:55:03.320 E/WifiHW (2809): wifi_connect_to_supplicant:ctrl_conn is NULL!!
01-01 21:55:03.420 E/WifiHW (2809): wifi_connect_to_supplicant:ctrl_conn is NULL!!
01-01 21:55:03.520 E/WifiHW (2809): wifi_connect_to_supplicant:ctrl_conn is NULL!!
01-01 21:55:03.620 E/WifiHW (2809): wifi_connect_to_supplicant:ctrl_conn is NULL!!
01-01 21:55:03.720 E/WifiHW (2809): wifi_connect_to_supplicant:ctrl_conn is NULL!!
01-01 21:55:03.820 E/WifiHW (2809): wifi_connect_to_supplicant:ctrl_conn is NULL!!
01-01 21:55:03.920 E/WifiHW (2809): wifi_connect_to_supplicant:ctrl_conn is NULL!!
01-01 21:55:04.025 E/WifiHW (2809): wifi_connect_to_supplicant: Unable to open connection to supplicant on "/data/misc/wifi/eth0": No such file or directory
01-01 21:55:09.025 E/WifiHW (2809): wifi_connect_to_supplicant: Supplicant is not running, cannot connect
01-01 21:55:14.025 E/WifiHW (2809): wifi_connect_to_supplicant: Supplicant is not running, cannot connect
01-01 21:55:19.025 E/WifiHW (2809): wifi_connect_to_supplicant: Supplicant is not running, cannot connect
01-01 21:55:19.160 E/WifiDirectController(2583): Release DirectController. --- Wifi Direct is not initialized. Don't need to release wifi direct.
01-01 21:55:19.165 E/[FT]-Server(5915): NetworkStateReceiver :intent: android.net.wifi.supplicant.CONNECTION_CHANGE
01-01 21:55:19.165 E/[FT]-Server(5915): NetworkStateReceiver :No work intent: android.net.wifi.supplicant.CONNECTION_CHANGEstate: DISCONNECTED
01-01 21:55:19.170 E/WifiSettingButton(2936): onReceive()-S:0
01-01 21:55:19.860 E/WifiSettingButton(2936): onReceive()-S:1
noone?? Plz
Ok, Phone sent to Warranty service.. Thanks anyway.
i have the same issue here... anyone knows how to fix it?
Mainboard error - Warranty refused - coz i have reinstalled ROM. This is my last Samsung ever.
ChewyLV said:
Mainboard error - Warranty refused - coz i have reinstalled ROM. This is my last Samsung ever.
Click to expand...
Click to collapse
Warranty and why its voided and the workarounds to avoid are plastered all over the forum .
jje
Take my words back.. Samsung service rocks..
try to flash a new baseband version of firmware and check it again.
xinchi said:
try to flash a new baseband version of firmware and check it again.
Click to expand...
Click to collapse
How does this fix wifi?
Wifi not work!
Hi all! I am a brazilian, sorry for my poor english. I have a GT-I9100 and used the 4.0.3 ICS ZTO official (LP7 kernel, LPF modem and LP4 CSC) until last week. The wifi started having problems (icon in the notification bar grayed out), not allowing the activation of wifi, even by settings menu. There are several similar cases on the Internet, including citing defective hardware (internal battery next to the wifi chip), which is not my case (i already checked internally). Always used CF-ROOT kernels compatible to root the phone. So as the wifi stopped working, i decided to test the Omega ROM V20 (JB 4.1.2). The phone is working better than my old version of Android, except that wifi still does not work. Because of this, i decided to install the version that came from the factory on my phone (2.3.3 GB ZTO, KE4 kernel, KE2 modem and CSC). And to my surprise, the wifi was fully functional!!! So i went back to Omega ROM V20 and wifi no longer worked anymore. In all exchanges rom, all wipes are made. Then i installed Catlog to see if i could find some clue about this defect, and the log related to wifi was this:
02-19 22:16:06.065 E/WifiHW (2421): ==========[WIFI] Station firmware load ===========
02-19 22:16:06.130 E/WifiHW (2421): ##################### set firmware type 0 #####################
02-19 22:16:07.260 E/WifiHW (2421): return of insmod : ret = -1, No such device
02-19 22:16:07.260 E/WifiStateMachine(2421): Failed to load driver!
02-19 22:16:07.270 E/WifiStateMachine(2421): DriverFailedState
02-19 22:16:07.280 E/WifiHW (2421): Cannot open "/data/.cid.info": No such file or directory
02-19 22:16:07.280 E/WifiHW (2421): ==========[WIFI] Station firmware load ===========
02-19 22:16:08.445 E/WifiHW (2421): return of insmod : ret = -1, No such device
02-19 22:16:08.445 E/WifiStateMachine(2421): Failed to load driver!
02-19 22:16:08.475 E/WifiStateMachine(2421): DriverFailedState
These lines are always repeating itself in the log since the wifi button on the notification bar is greyed out. Apparently it's a problem with the wifi drivers. In my phone the 2.3.3 is only that the wifi works, however, is pretty old now and do not offer the features that a JB version can offer. I ask the masters of this wonderful forum: is there any way to import the wifi drivers from my original version 2.3.3 to 4.1.2 Omega ROM i'm using now?
Best regards from Brazil to everyone!
Flash LSJ and tell us how it went.
Sent from the little guy
Conclusion: my wifi chip is DEAD!
Hello and thank you for the tip. But unfortunately i came to the conclusion that i have a hardware problem. First, i installed the leaked version (with no mods) for United Kingdom 4.1.2 (LSJ kernel, LS1 CSC and LS6 modem). With this version, the wifi is not greyed out, however not active (immediately the slide button back to position "0"). So i went back to version 2.3.3 where the wifi worked perfectly. Now the wifi activate, but not find any network and in a few seconds, turns off automatically. We made all wipes in exchange ROM. My GT-I9100 has a little more than 2 years old an now my wifi chip is DEAD! At least the bluetooth still works! The deal is now expected to launch the Galaxy S4 to spend some money, because S3 is outdated. In Brazil, not worth sending fix this phone, even out of warranty (it can cost up to half the price of a new). I am very grateful for your interest in helping me!
Thank you very much!!!
You still got one bullet left, nuke script.
Sent from the little guy
Ok, i'll try, but without much hope ...
Thanks once again!
See it this way, you got nothing to lose and wifi to win
Sent from the little guy
Hi all, want to congratulate you on this forum, I hope you can help me.
Recently bought this "SGP 5.0 YP-70" from Amazon and am very pleased, but after two weeks of use, suddenly stopped working the WiFi and BT, I have dealt with several networks and definitely nothing. Update to 2.3.6, then downgrade to 2.2.2, rooting, unrooting, I'm thinking it's a hardware problem, someone has had a similar fault? I can not return it for warranty because the shipping (Venezuela) would cost more than a new one. I would appreciate any suggestions.
:crying:
try flush Dalvik cache and cache partition
if dont help, get logcat, try to turn on wifi and bt and show us those logs
Arlicc said:
try flush Dalvik cache and cache partition
if dont help, get logcat, try to turn on wifi and bt and show us those logs
Click to expand...
Click to collapse
Do not work.
Apreciate your help
The logcat:
# logcat *:E
E/WifiSettingButton( 239): activate()
E/WifiHW ( 121): DRV_AP_MODULE_ARG.
E/WifiHW ( 121): WIFI_CONF_PATH. /system/etc/wifi/wifi.conf
E/WifiHW ( 121): DRIVER_MODULE_PATH. /lib/modules/dhd.ko
E/WifiHW ( 121): insmod load_file "/lib/modules/dhd.ko"
E/WifiSettingButton( 239): onReceive()-S:2
E/WifiHW ( 121): wifi_start_supplicant: pi->serial=117440522, serial=0
E/WifiHW ( 121): wifi_connect_to_supplicant:IFACE_DIR(/data/misc/wifi), iface(eth0), ifname(/data/misc/wifi/eth0)
E/WifiHW ( 121): wifi_connect_to_supplicant: ifname(/data/misc/wifi/eth0)
E/WifiHW ( 121): wifi_connect_to_supplicant:ctrl_conn is NULL!!
E/wpa_supplicant( 2865): Line 1: unknown global field ''.
E/wpa_supplicant( 2865): Line 1: Invalid configuration line ''.
E/wpa_supplicant( 2865): Line 325: unknown global field 'proactive_key_caching=1'.
E/wpa_supplicant( 2865): Line 325: Invalid configuration line 'proactive_key_caching=1'.
E/WifiSettingButton( 239): onReceive()-S:3
E/wpa_supplicant( 2865): ioctl[SIOCGIFFLAGS]
E/wpa_supplicant( 2865): ioctl[SIOCSIWPMKSA]
E/wpa_supplicant( 2865): ioctl[SIOCSIWMODE]
E/wpa_supplicant( 2865): ioctl[SIOCGIRANGE]
E/wpa_supplicant( 2865): ioctl[SIOCGIWMODE]
E/wpa_supplicant( 2865): ioctl[SIOCSIWAP]
E/wpa_supplicant( 2865): ioctl[SIOCSIWENCODEEXT]
E/wpa_supplicant( 2865): ioctl[SIOCSIWENCODE]
E/wpa_supplicant( 2865): ioctl[SIOCSIWENCODEEXT]
E/wpa_supplicant( 2865): ioctl[SIOCSIWENCODE]
E/wpa_supplicant( 2865): ioctl[SIOCSIWENCODEEXT]
E/wpa_supplicant( 2865): ioctl[SIOCSIWENCODE]
E/wpa_supplicant( 2865): ioctl[SIOCSIWENCODEEXT]
E/wpa_supplicant( 2865): ioctl[SIOCSIWENCODE]
E/wpa_supplicant( 2865): Failed to disable WPA in the driver.
E/wpa_supplicant( 2865): ioctl[SIOCGIWMODE]
E/wpa_supplicant( 2865): ioctl[SIOCSIWAP]
E/wpa_supplicant( 2865): ioctl[SIOCGIFFLAGS]
E/WifiHW ( 121): wifi_connect_to_supplicant:ctrl_conn is NULL!!
E/WifiHW ( 121): wifi_connect_to_supplicant:ctrl_conn is NULL!!
E/WifiHW ( 121): wifi_connect_to_supplicant:ctrl_conn is NULL!!
E/WifiHW ( 121): wifi_connect_to_supplicant:ctrl_conn is NULL!!
E/WifiHW ( 121): wifi_connect_to_supplicant:ctrl_conn is NULL!!
E/WifiHW ( 121): wifi_connect_to_supplicant:ctrl_conn is NULL!!
E/WifiHW ( 121): wifi_connect_to_supplicant:ctrl_conn is NULL!!
E/WifiHW ( 121): wifi_connect_to_supplicant:ctrl_conn is NULL!!
E/WifiHW ( 121): wifi_connect_to_supplicant:ctrl_conn is NULL!!
E/WifiHW ( 121): wifi_connect_to_supplicant: Unable to open connection to supplicant on "/data/misc/wifi/eth0": No such file or directory
E/WifiHW ( 121): wifi_connect_to_supplicant: Supplicant is not running, cannot connect
E/WifiHW ( 121): wifi_connect_to_supplicant: Supplicant is not running, cannot connect
E/WifiHW ( 121): wifi_connect_to_supplicant: Supplicant is not running, cannot connect
E/WifiSettingButton( 239): onReceive()-S:0
E/WifiHW ( 121): [WIFI] Unload Driver
E/WifiSettingButton( 239): onReceive()-S:1
E/AxT9IME ( 246): WordSymbInit: 1
E/BluetoothSettingButton( 239): activate()
E/BluetoothSettingButton( 239): onReceive()-S:11
E/BTL-SERVER( 4031): BTLD starting...
E/BTL_CFG ( 4031): WARNING : [service.brcm.bt.patchfile] property_get failed (0)
E/BTL_CFG ( 4031): WARNING : [service.brcm.bt.bt_wake_polar] property_get failed (0)
E/BTL_CFG ( 4031): WARNING : [service.brcm.bt.host_wake_polar] property_get failed (0)
E/BTL_CFG ( 4031): WARNING : [service.brcm.bt.pcm_clk] property_get failed (0)
E/BTL_CFG ( 4031): WARNING : [service.brcm.bt.pcm_ms_role] property_get failed (0)
E/BTL_CFG ( 4031): WARNING : [service.brcm.bt.TRC_BTAPP] property_get failed (0)
E/ ( 4031): BTM: btm_read_local_name_complete: local name is [BCM4329B1]
E/ ( 4031): [hcis] Unknown HCI message type drop this byte 0x34
E/ ( 4031): [hcis] Unknown HCI message type drop this byte 0x31
E/BTAPP_CONF( 4031): Cannot open file /etc/bluetooth/did.conf
E/BTAPP_CONF( 4031): Cannot open file /etc/bluetooth/did.conf
E/BTAPP_CONF( 4031): Cannot open file /etc/bluetooth/did.conf
E/ ( 4045): this is not dir. type: 4, name: .
E/ ( 4045): this is not dir. type: 4, name: ..
E/ ( 4045): this is not reg. type: 4, name: F80:BD:70:52:76
E/ ( 4045): this is not reg. type: 4, name: F80:BD:70:52:76
E/ADAPTER ( 4045): hci_open_dev(hci0): No such device (19)
E/BluetoothEventLoop.cpp( 121): event_filter: Received signal org.bluez.AdapterropertyChanged from /org/bluez/590/hci0
E/BluetoothEventLoop.cpp( 121): event_filter: Received signal org.bluez.AdapterropertyChanged from /org/bluez/590/hci0
E/BluetoothEventLoop.cpp( 121): event_filter: Received signal org.bluez.AdapterropertyChanged from /org/bluez/590/hci0
E/BluetoothSettingButton( 239): onReceive()-S:12
E/BluetoothEventLoop.cpp( 121): event_filter: Received signal org.bluez.AdapterropertyChanged from /org/bluez/4045/hci0
E/OppEventHandler.cpp( 260): ye NewGlobalRefbject:0x40519ed0, me:0x40519ed0, gref:1
E/RequestQueueHelper( 3708): [Thread-15/15] Next pending job not found!!
E/RequestQueueHelper( 3708): [OPSWorkerThread-1343113726405/21] Next pending job not found!!
Look like messed up configuration or messed up kernel.
Try install right 2.3.5 or 2.3.6 and try to flash a right kernel.
I had got similar problem after flash cm7 kernel on stock 2.3.6
Sent from my GT-I9000 using xda app-developers app
Arlicc said:
Look like messed up configuration or messed up kernel.
Try install right 2.3.5 or 2.3.6 and try to flash a right kernel.
I had got similar problem after flash cm7 kernel on stock 2.3.6
Sent from my GT-I9000 using xda app-developers app
Click to expand...
Click to collapse
I've tried every rom found and nothing happen, now I am with "g70xxkph-rooted-rj14.tar.md5" taked from http://forum.xda-developers.com/showthread.php?t=1446774, thanks to WT Ho.
I have to said that I am not an expert in Android and nothing come to my mind, what else can be done?
davisabe said:
I've tried every rom found and nothing happen, now I am with "g70xxkph-rooted-rj14.tar.md5" taked from http://forum.xda-developers.com/showthread.php?t=1446774, thanks to WT Ho.
I have to said that I am not an expert in Android and nothing come to my mind, what else can be done?
Click to expand...
Click to collapse
Try this link
http://forum.xda-developers.com/showthread.php?t=1414565
It's the kernel direct. Backup your device before you do anything.
alljokingaside said:
Try this link
http://forum.xda-developers.com/showthread.php?t=1414565
It's the kernel direct. Backup your device before you do anything.
Click to expand...
Click to collapse
Just did a backup and installed the Kernel and still without WiFi or BT
I really think it's a hardware issue.
Taked from terminal; maybe it can help:
$ export PATH=/data/local/bin:$PATH
$ su
# busybox iplink show dev eth0
iplink: can't find device 'eth0'
#
# iplink show
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
2: ifb0: <BROADCAST,NOARP> mtu 1500 qdisc noop qlen 32
link/ether aa:c6:02:98:3a:c2 brd ff:ff:ff:ff:ff:ff
3: ifb1: <BROADCAST,NOARP> mtu 1500 qdisc noop qlen 32
link/ether e2:53:f6:ae:68:37 brd ff:ff:ff:ff:ff:ff
4: usb0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop qlen 1000
link/ether 62:73:74:4d:bd:13 brd ff:ff:ff:ff:ff:ff
5: sit0: <NOARP> mtu 1480 qdisc noop
link/sit 0.0.0.0 brd 0.0.0.0
6: ip6tnl0: <NOARP> mtu 1460 qdisc noop
link/tunnel6 00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00 brd 00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00
#
davisabe said:
Just did a backup and installed the Kernel and still without WiFi or BT
I really think it's a hardware issue.
So, nobody has a clue?
Click to expand...
Click to collapse
WiFi & BT
davisabe said:
davisabe said:
Just did a backup and installed the Kernel and still without WiFi or BT
I really think it's a hardware issue.
So, nobody has a clue?
Click to expand...
Click to collapse
Came on guys!
Click to expand...
Click to collapse
try going to CWM doing all 3wipes there, wipe data, factory reset, clear dalvik cache then reboot.
if this doesn't help, you most probably have a h/w problem
I'm posting this here because I am the only developer for my tablet and I cannot solve this wifi issue.
My information has not changed since CM10, where it worked just fine. But for some reason its not working with Android 4.2
https://github.com/giveen/android_device_dell_streak7/tree/cm10.1
Code:
/WifiService( 530): setWifiEnabled: true pid=757, uid=1000
D/BluetoothAdapter( 658): 1088952104: getState() : mService = null. Returning STATE_OFF
D/dalvikvm( 530): GC_CONCURRENT freed 798K, 21% free 5425K/6796K, paused 9ms+5ms, total 74ms
D/BluetoothAdapter( 757): 1088293664: getState() : mService = null. Returning STATE_OFF
W/PrintK ( 530): ## wifi_probe
W/PrintK ( 530): wifi_set_power = 1
D/dalvikvm( 757): GC_CONCURRENT freed 371K, 13% free 3895K/4444K, paused 3ms+9ms, total 76ms
W/PrintK ( 530): wifi_set_carddetect = 1
W/PrintK ( 530):
W/PrintK ( 530): Dongle Host Driver, version 4.218.248.31
D/PrintK ( 5): <6>mmc2: new high speed SDIO card at address 0001
W/PrintK ( 5): DHD: dongle ram size is set to 294912(orig 294912)
W/PrintK ( 5): Firmware version = wl0: Feb 11 2011 17:00:41 version 4.218.248.23
W/PrintK ( 5): wl configuration done!
W/PrintK ( 5): wlan0: Broadcom Dongle Host Driver mac=48:5d:60:fa:e5:8d
W/PrintK ( 5): Exited wl_control_wl_start
D/Tethering( 530): sendTetherStateChangedBroadcast 0, 0, 0
E/WifiStateMachine( 530): Failed to reload STA firmware java.lang.IllegalStateException: command '7 softap fwreload wlan0 STA' failed with '400 7 Softap operation failed (No such file or directory)'
D/Tethering( 530): sendTetherStateChangedBroadcast 1, 0, 0
D/Tethering( 530): InitialState.processMessage what=4
D/Tethering( 530): sendTetherStateChangedBroadcast 1, 0, 0
D/CommandListener( 91): Setting iface cfg
D/CommandListener( 91): Trying to bring down wlan0
D/Tethering( 530): InitialState.processMessage what=4
D/Tethering( 530): sendTetherStateChangedBroadcast 0, 0, 0
I/wpa_supplicant( 1433): Successfully initialized wpa_supplicant
W/PrintK ( 1433): Exited wl_control_wl_start
D/Tethering( 530): sendTetherStateChangedBroadcast 1, 0, 0
E/WifiConfigStore( 530): Error parsing configurationjava.io.FileNotFoundException: /data/misc/wifi/ipconfig.txt: open failed: ENOENT (No such file or directory)
D/BluetoothAdapter( 757): 1088293664: getState() : mService = null. Returning STATE_OFF
E/WifiStateMachine( 530): Failed to set frequency band 0
D/BluetoothAdapter( 658): 1088952104: getState() : mService = null. Returning STATE_OFF
W/PrintK ( 1433): wl_iw_iscan_set_scan: Scan from SIOCGIWSCAN not supported
W/wpa_supplicant( 1433): wlan0: Failed to initiate AP scan
V/PrintK ( 556): <7>[ASOC-DBG]tegra_dapm_event_int_spk SND_SOC_DAPM_EVENT_ON ? 0
V/PrintK ( 556):
W/PrintK ( 1433): wl_iw_iscan_set_scan: Scan from SIOCGIWSCAN not supported
W/wpa_supplicant( 1433): wlan0: Failed to initiate AP scan
V/PrintK ( 0): <7>wlan0: no IPv6 routers present
V/PrintK ( 97): <7>[ASOC-DBG]tegra_dapm_event_int_spk SND_SOC_DAPM_EVENT_ON ? 2
V/PrintK ( 97):
W/ResourceType( 757): getEntry failing because entryIndex 129 is beyond type entryCount 4
D/dalvikvm( 757): GC_CONCURRENT freed 492K, 15% free 3861K/4532K, paused 3ms+11ms, total 46ms
D/PrintK ( 97): <6>wm8903_set_dai_trigger 1
W/PrintK ( 1433): wl_iw_iscan_set_scan: Scan from SIOCGIWSCAN not supported
W/wpa_supplicant( 1433): wlan0: Failed to initiate AP scan
D/PrintK ( 97): <6>wm8903_set_dai_trigger 0
W/PrintK ( 64): dog, +tegra_wdt_set_timeout, wdt->timeout=130
W/PrintK ( 1433): wl_iw_iscan_set_scan: Scan from SIOCGIWSCAN not supported
W/wpa_supplicant( 1433): wlan0: Failed to initiate AP scan
D/dalvikvm( 725): GC_CONCURRENT freed 196K, 12% free 2812K/3184K, paused 3ms+2ms, total 27ms
D/dalvikvm( 725): GC_CONCURRENT freed 193K, 11% free 3023K/3396K, paused 3ms+3ms, total 28ms
D/NvOsDebugPrintf( 725): NvRmPrivGetChipIdStub: Could not read Tegra chip id/rev
D/NvOsDebugPrintf( 725): Expected on kernels without Tegra3 support, using Tegra2
D/dalvikvm( 725): GC_FOR_ALLOC freed 86K, 12% free 3033K/3432K, paused 20ms, total 20ms
I/dalvikvm-heap( 725): Grow heap (frag case) to 3.756MB for 654928-byte allocation
D/dalvikvm( 725): GC_CONCURRENT freed 3K, 10% free 3669K/4072K, paused 2ms+3ms, total 25ms
D/dalvikvm( 725): WAIT_FOR_CONCURRENT_GC blocked 23ms
D/dalvikvm( 725): GC_FOR_ALLOC freed 175K, 9% free 3792K/4148K, paused 21ms, total 21ms
I/dalvikvm-heap( 725): Grow heap (frag case) to 5.188MB for 1379576-byte allocation
D/dalvikvm( 725): GC_CONCURRENT freed 19K, 7% free 5119K/5496K, paused 2ms+3ms, total 23ms
D/dalvikvm( 725): WAIT_FOR_CONCURRENT_GC blocked 20ms
D/dalvikvm( 725): GC_FOR_ALLOC freed 0K, 7% free 5120K/5496K, paused 19ms, total 19ms
I/dalvikvm-heap( 725): Grow heap (frag case) to 5.950MB for 818656-byte allocation
D/dalvikvm( 725): GC_FOR_ALLOC freed 0K, 6% free 5919K/6296K, paused 20ms, total 20ms
V/PrintK ( 556): <7>[ASOC-DBG]tegra_dapm_event_int_spk SND_SOC_DAPM_EVENT_ON ? 0
V/PrintK ( 556):
V/PrintK ( 97): <7>[ASOC-DBG]tegra_dapm_event_int_spk SND_SOC_DAPM_EVENT_ON ? 2
V/PrintK ( 97):
D/PrintK ( 97): <6>wm8903_set_dai_trigger 1
D/WifiConfigStore( 530): IP config changed SSID = "DeathStar" linkProperties: LinkAddresses: [] Routes: [] DnsAddresses: []
D/WifiConfigStore( 530): proxy changed SSID = "DeathStar"
W/PrintK ( 1433): wl_iw_iscan_set_scan: Scan from SIOCGIWSCAN not supported
W/wpa_supplicant( 1433): wlan0: Failed to initiate AP scan
W/PrintK ( 1433): wl_iw_iscan_set_scan: Scan from SIOCGIWSCAN not supported
W/wpa_supplicant( 1433): wlan0: Failed to initiate AP scan
D/CommandListener( 91): Clearing all IP addresses on wlan0
D/ConnectivityService( 530): ConnectivityChange for WIFI: DISCONNECTED/DISCONNECTED
D/ConnectivityService( 530): Attempting to switch to mobile
D/ConnectivityService( 530): Attempting to switch to BLUETOOTH_TETHER
D/dalvikvm( 757): GC_CONCURRENT freed 195K, 10% free 4113K/4532K, paused 3ms+5ms, total 40ms
W/IInputConnectionWrapper( 757): finishComposingText on inactive InputConnection
W/PrintK ( 1433): wl_iw_iscan_set_scan: Scan from SIOCGIWSCAN not supported
W/wpa_supplicant( 1433): wlan0: Failed to initiate AP scan
W/PrintK ( 1433): wl_iw_iscan_set_scan: Scan from SIOCGIWSCAN not supported
W/wpa_supplicant( 1433): wlan0: Failed to initiate AP scan
D/dalvikvm( 530): GC_CONCURRENT freed 658K, 21% free 5428K/6796K, paused 14ms+5ms, total 60ms
W/PrintK ( 1433): wl_iw_iscan_set_scan: Scan from SIOCGIWSCAN not supported
W/wpa_supplicant( 1433): wlan0: Failed to initiate AP scan
D/Tethering( 530): MasterInitialState.processMessage what=3
D/PrintK ( 97): <6>wm8903_set_dai_trigger 0
I/UpdateCheckReceiver( 1066): Got connectivity change, has connection: false
W/PrintK ( 1433): wl_iw_iscan_set_scan: Scan from SIOCGIWSCAN not supported
W/wpa_supplicant( 1433): wlan0: Failed to initiate AP scan
D/CommandListener( 91): Clearing all IP addresses on wlan0
D/WifiService( 530): setWifiEnabled: false pid=757, uid=1000
D/BluetoothAdapter( 658): 1088952104: getState() : mService = null. Returning STATE_OFF
D/BluetoothAdapter( 757): 1088293664: getState() : mService = null. Returning STATE_OFF
W/PrintK ( 1433): Failed to set 'wpa_auth'iovar
D/PrintK ( 1433): <6>ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
I/wpa_supplicant( 1433): wlan0: CTRL-EVENT-TERMINATING
D/Tethering( 530): InitialState.processMessage what=4
D/Tethering( 530): sendTetherStateChangedBroadcast 0, 0, 0
W/Netd ( 91): No subsystem found in netlink event
D/NetlinkEvent( 91): Unexpected netlink message. type=0x11
W/PrintK ( 530): ## wifi_remove
W/PrintK ( 530): wifi_set_carddetect = 0
W/PrintK ( 530): wifi_set_power = 0
D/PrintK ( 68): <6>mmc2: card 0001 removed
W/PrintK ( 68): [MMC]> host name mmc2, q_wlan_flag: 0
Hi,
I use a S3 (i9000) and after switching from CM10 o CM10.1 I lost the wifi internet connection at the office. I can connect, but I don't "get" an internet connection form the router. wifi symbol is grey, not blue.
At home, I have two wifi routers, with both provide a stable connection with internet.
The router settings have not changed!
Bx2
Nice thread jacking. Mine has to do with actual development.
giveen said:
Nice thread jacking. Mine has to do with actual development.
Click to expand...
Click to collapse
I tried to tell you that it happens to other devices too. I wasn't trying to jack your thread. Making a log so you could compare failed.
My apologies.
Sorry for jumping on you.
Hello, here is my problem,
I have always ported the miui rom to my thl w200 device.
in the latest builds, after porting it to my phone I get stuck at bootlogo.
I did a logcat but cant really find what causes this.
someone can look at it and help me?
--------- beginning of /dev/log/main
I/Resize ( 86): The size of data already meet the request.
I/Resize ( 86): Partition has been resized,so nothing to do!
D/ADB_SERVICES( 158): install_listener('tcp:5037','*smartsocket*')
D/ADB_SERVICES( 158): adb_main(): pre init_jdwp()
D/ADB_SERVICES( 158): adb_main(): post init_jdwp()
D/ADB_SERVICES( 158): Event loop starting
D/ADB_SERVICES( 158): transport: 0xf67520 init'ing for usb_handle 0xf67498 (sn='')
I/ADB_SERVICES( 158): transport: usb
D/ADB_SERVICES( 158): transport: (null) registered
D/ADB_SERVICES( 158): transport: (null) (16,17) starting
W/ADB_SERVICES( 158): (null): starting transport input thread, reading from fd 17
W/ADB_SERVICES( 158): (null): starting transport output thread on fd 17, SYNC online (2)
D/ADB_SERVICES( 158): recv: SYNC 00000001 00000002 0000
W/ADB_SERVICES( 158): (null): transport SYNC online
E/ccci_mdinit(0)( 121): md_init ver:1.00
E/ccci_mdinit(0)( 120): md_init ver:1.00
I/6620_launcher( 117): open device node succeed.(Node:/dev/stpwmt, fd:3)
I/6620_launcher( 117): keypersist.mtk.wcn.combo.chipid)-value0x6628),chipId:0x6628
I/6620_launcher( 117): index:1, chipId:0x6628
I/6620_launcher( 117): chiId:0x6628
I/6620_launcher( 117): index:1, chipId:0x6628
I/6620_launcher( 117): set chipId(0x6628) to HIF-SDIO module
I/6620_launcher( 117): Info:key:mt6620.defAnt value:mt6620_ant_m3.cfg
I/6620_launcher( 117): Info:key:mt6628.defAnt value:mt6628_ant_m1.cfg
I/6620_launcher( 117): NULL is returned, eighter EOF or error maybe found
I/6620_launcher( 117): close /system/etc/firmware/WMT.cfg succeed
I/6620_launcher( 117): index:1, chipId:0x6628
I/6620_launcher( 117): STP Mode is not set, fetching default mode...
I/6620_launcher( 117): chipId(0x6628), default Mode(1), strlen(gWmtCfgName)(39), wmtCfgFile(/system/etc/firmware//mt6628_ant_m1.cfg)
I/6620_launcher( 117): HifConfig:0x0001, wmtCfgFile:/system/etc/firmware//mt6628_ant_m1.cfg
I/6620_launcher( 117): keyro.build.type)-valueuser)
I/6620_launcher( 117): MCU patch folder path: /system/etc/firmware/
I/6620_launcher( 117): Common Interface: UART mode
I/6620_launcher( 117): MCU patch folder path: /system/etc/firmware/
I/6620_launcher( 117): Common Interface: UART mode
I/6620_launcher( 117): uart name ttyMT2
D/MsensorDaemon( 151): Msensor deamon statr!!!!!!!!!!!!
D/MsensorDaemon( 151): msensor demon start process detect demon name = memsicd3416x
D/MsensorDaemon( 151):
D/MsensorDaemon( 151): msensor demon start process detect demon prop = init.svc.memsicd3416x
D/MsensorDaemon( 151):
D/MsensorDaemon( 151): start_msensor_demon
D/MsensorDaemon( 151): HAVE_LIBC_SYSTEM_PROPERTIES
E/MsensorDaemon( 151): [99] ''
D/permission_check( 145): permission check ver:0.01
D/permission_check( 145): Empty, not decrypt!
D/permission_check( 145): change_md_nvram_attr++
--------- beginning of /dev/log/system
E/POAD ( 155): boot_mode = 0
E/POAD ( 155): update boot reason = 0
D/permission_check( 145): new_ver file exist!!!
D/permission_check( 145): change_md_nvram_attr--0
I/stp_dump( 143): ==>main
I/stp_dump( 143): stp_dump_ctrl_iface_trace_logger_sendto_fd succeed
E/stp_dump( 143): [STP_DBG] family id = 19
I/stp_dump( 143): sending dummy command
I/stp_dump( 143): set sock number to 9
I/stp_dump( 143): addr.sun_path:stp_DIR=/data/misc/stp_dump GROUP=stp
I/stp_dump( 143): Using existing control interface directory.
E/stp_dump( 143): mkdir (/data/misc/stp_dump) succeed
I/stp_dump( 143): ctrl_interface_group=1000 (from group name 'stp')
I/stp_dump( 143): chown (/data/misc/stp_dump) succeed
I/stp_dump( 143): CTRL: chmod[/data/misc/stp_dump] succeed
E/stp_dump( 143): ctrl_iface bind(PF_UNIX) failed: Address already in use
E/stp_dump( 143): ctrl_iface exists, but does not allow connections - assuming it was leftover from forced program termination
D/stp_dump( 143): Successfully replaced leftover ctrl_iface socket '/data/misc/stp_dump/stpd'
I/stp_dump( 143): set sock number to 10
I/stp_dump( 143): stp_dump_ctrl_iface_init succeed.
I/stp_dump( 143): ==>main222
I/busybox ( 114): run-parts: /system/etc/init.d: No such file or directory
D/wlanLoader( 144): checkSupport 0x6628
D/wlanLoader( 144): Match 0x6628
D/wlanLoader( 144): Get the correct chip version mt6628
D/wlanLoader( 144): Get chip Version mt6628.
D/wlanLoader( 144): DRIVER_MODULE_PATH is /system/lib/modules/wlan_mt6628.ko
D/MsensorDaemon( 151): HAVE_LIBC_SYSTEM_PROPERTIES
D/MsensorDaemon( 151): memsicd3416x running
D/MsensorDaemon( 151): Msensor deamon2 statr!!!!!!!!!!!!
D/MsensorDaemon( 151): open demon attr err = No such file or directory
E/stp_dump( 143): table == NULL || table->table == NULL
E/stp_dump( 143): table == NULL || table->table == NULL
D/wlanLoader( 144): Success to insmod the /system/lib/modules/wlan_mt6628.ko
I/thermal_repeater( 154): START+++++++++ 154
I/thermal_repeater( 154): Success to write 154 to /proc/wmt_tm/tm_pid
I/thermal_repeater( 154): Fail to chmod ffffffff
I/thermal_repeater( 154): Enter infinite loop
I/AEE/AED ( 122): Built Jan 30 2013 19:35:15
D/AEE/AED ( 122): ChangeAEEWorkMode: 3
I/AEE/AED ( 122): AED config
I/AEE/AED ( 122): mode '3'
I/AEE/AED ( 122): exp level '1
I/AEE/AED ( 122): dal enable '0'
I/AEE/AED ( 122): db count '20'
I/AEE/AED ( 122): db storage '1'
I/AEE/AED ( 122): SMP Info => 1
I/MobileLogD( 123): [void change_permission()] set mobile_log_d is in root user, adjust caps for its thread
I/MobileLogD( 123): mobilelog start after boot, mode:0
D/MobileLogD/cache( 123): init cache configure items....
D/MobileLogD/cache( 123): value of ro.build.type:user.
I/installd( 140): installd firing up
D/PQ ( 130): PQ init start...
D/PQ ( 130): PQ test...
I/ ( 137): ServiceManager: 0x41661698
D/PQ ( 130): PQ init end !
E/AEE/LIBAEE( 122): Can't remove file /sdcard/mtklog/aee_exp/temp: No such file or directory
E/AEE/LIBAEE( 122): Can't remove file /data/aee_exp/temp: No such file or directory
V/AEE/AED ( 122): ETB buffer length = 512
I/AEE/AED ( 122): wdt_status = 2, fiq_step=0
I/AEE/AED ( 122): reboot_reason = 0
V/AEE/AED ( 122): ETM start
D/installd( 140): LBE is enabled, starting...
D/NVRAM ( 152): NvRAMAgent created
E/NVRAM ( 152): Haman, serviceManager work well
D/NVRAM ( 152): NvRAMAgent Service is now ready
I/DPFD ( 149): [DPFD] main start ...
I/DPFD ( 149): [DPFD] set priority to RR:268435540
I/DPFD ( 149): [int adjustPriority()] set dpfd is in root user, adjust caps for its thread
D/DPFD ( 149): [DPFD] Wait Request.....
I/DMAgent ( 147): DMAgent created
I/DMAgent ( 147): [DMAgent]register OK.
D/DMAgent ( 147): DMAgent Service is now ready
D/MobileLogD( 123): write "mobilelog start after boot, mode:0" to mblog
E/installd( 140): Failed to load liblbesec.so
I/installd( 140): add service shelld success!
W/installd( 140): service start entry 'shelld', flag :0
W/installd( 140): starting 'shelld'
E/ccci_fsd(0)( 118): md_fsd Ver:v1.00
I/Hald ( 133): Hald 1.1011 starting
D/ccci_fsd(1)( 118): /dev/ccci_fs is opend(600).
D/ccci_fsd(1)( 118): Check OTP...
D/Hald ( 133): Create ResetManager
D/Hald ( 133): Size of initial message: 6
D/Hald ( 133): [MTK_WIFI] family id = 20
D/Hald ( 133): Reset Manager Prepare Dummy command
D/Hald ( 133): Reset Manager Send Command for binding
D/Hald ( 133): Start ResetManager
E/ccci_fsd(0)( 119): md_fsd Ver:v1.00
E/ccci_fsd(2)( 119): /dev/ccci2_fs is not enabled(2).
D/MobileLogD/cache( 123): config autostart=0 same as current value
D/MobileLogD/cache( 123): config logpath=/mnt/sdcard same as current value
D/MobileLogD/cache( 123): config logsize=300 same as current value
D/MobileLogD/cache( 123): config AndroidLog=1 same as current value
D/MobileLogD/cache( 123): config KernelLog=1 same as current value
D/MobileLogD/cache( 123): config BTLog=1 same as current value
D/MobileLogD/cache( 123): config BTLog=1 same as current value
E/MobileLogD/cache( 123): cant get true log path through property
E/MobileLogD/cache( 123): true path is /mnt/sdcard
D/MobileLogD( 123): create local socket server success
D/Vold ( 116): Check whether nvram restore ready!
D/NVRAM ( 128): g_i4CFG_File_Count: 25
D/NVRAM ( 128): NVM_Init Max Lid: 43
D/NVRAM ( 128): Total nvram Lid number is 43
I/Netd ( 125): Netd 1.0 starting
W/InterfaceController( 125): Warning (Cannot load library: load_library(linker.cpp:745): library "/system/lib/libnetcmdiface.so" not found) while opening the net interface command library
D/agps ( 142): [agps] WARNING: [Main] mtk_agpsd is running ver=0.46
D/agps ( 142): [agps] WARNING: [Main] mkdir failure for /data/agps_supl/log reason=[File exists]
D/MtkAgpsNative( 142): SuplRawLog.bEnable:0
D/MtkAgpsNative( 142): SuplRawLog.szPath:/sdcard
D/MtkAgpsNative( 142): SuplRawLog.szFile:agps_raw.log
D/MtkAgpsNative( 142): SuplSslLog.bEnable:0
D/MtkAgpsNative( 142): SuplSslLog.szPath:/sdcard
D/MtkAgpsNative( 142): SuplSslLog.szFile:agps_ssl.log
I/MtkAgpsNative( 142): Enter up_int_init
I/MtkAgpsNative( 142): Enter mtk_agps_up_init
D/MtkAgpsNative( 142): FS_CreateDir: /data/agps_supl
W/MtkAgpsNative( 142): -> errno(EEXIST) => dir already exists
D/MtkAgpsNative( 142): ############ mtk_agps_up_init --> agps_disable_enalbe_times = 1 ############
Click to expand...
Click to collapse
Hi Guys
So I tried to port a MIUI V5 4.4.2 ROM to my device and after rebooting after flashing it everytime, I get an unresponisve black screen but device is detected by adb so I can easily boot into recovery. Recovery.log is perfectly clear though no problems during flashing. But this logcat goes way overy my head. Can you guys please help me Don't ignore this thread as I have trying the port since a month and litreally tried all guides, videos, tut's, google etc but didn't end up on a satisfactory guide. No guide could solve the problme. Asked many porting devs still no answer. So lets begin with basic info.
I have XOLO HIVE 8x-1000 MT6592 with 2 GB Ram ( rest specs can be found here - XOLO 8x-1000 Specifications ) and the rom I am trying to port is ELephone P9 ported ROM, MIUI V5 for Elephone P9 which is really same as my device except NFC and CPU clocking as it's 1.7 Ghz and mine is 1.4 Ghz, here specs forELEPHONE P9.
So I assume you must have looked specs of both devices which prove that they are identical in most aspects and I also hope you took a proper look at the ROM I am trying to port as I provided the link. So I asked every person I could from a noob to a dev who can help me but no answer and even no guide on how to port MIUI KK V5 for MTK devices. My logcat is in first post. Please do have a look and reply to it.
EDIT : I am using Windows 7 Ultimate as OS and WinRAR to port and Notepad++ set in UNIX mode to edit all my stuff like updater-script etc and also added logcat.txt if you want to have a look later at offline mode. Please help me. :'(
Here is my logcat now : Part 1
D/libEGL ( 784): loaded /system/lib/egl/libEGL_mali.so
D/libEGL ( 784): loaded /system/lib/egl/libGLESv1_CM_mali.so
I/Netd ( 783): execIptablesCommand android_fork_execvp exit
I/Netd ( 783): execIptablesCommand android_fork_execvp enter
D/libEGL ( 784): loaded /system/lib/egl/libGLESv2_mali.so
I/Netd ( 783): execIptablesCommand android_fork_execvp exit
I/Netd ( 783): execIptablesCommand android_fork_execvp enter
W/MALI ( 784): __egl_set_error:110: [WARNING]Mali EGL errorcode: 3003
W/libEGL ( 784): eglInitialize(0x1) failed (EGL_BAD_ALLOC)
I/Netd ( 783): execIptablesCommand android_fork_execvp exit
I/Netd ( 783): execIptablesCommand android_fork_execvp enter
I/[MALI][Gralloc]( 784): dlopen libsec_mem.so fail
I/gralloc ( 784): [Gralloc] refreshRate = 0, info.pixclock = ffffffff
I/gralloc ( 784): [Gralloc] info.upper_margin = ffffffff, info.lower_margin = f
fffffff
I/gralloc ( 784): [Gralloc] info.yres = 500, info.hsync_len = ffffffff
I/gralloc ( 784): [Gralloc] info.left_margin = ffffffff, info.right_margin = ff
ffffff
I/[MALI][Gralloc]( 784): ro_dpi: 320.000000
I/[MALI][Gralloc]( 784): using (fd=19)
I/[MALI][Gralloc]( 784): id = mtkfb
I/[MALI][Gralloc]( 784): xres = 720 px
I/[MALI][Gralloc]( 784): yres = 1280 px
I/[MALI][Gralloc]( 784): xres_virtual = 720 px
I/[MALI][Gralloc]( 784): yres_virtual = 3840 px
I/[MALI][Gralloc]( 784): bpp = 32
I/[MALI][Gralloc]( 784): r = 16:8
I/[MALI][Gralloc]( 784): g = 8:8
I/[MALI][Gralloc]( 784): b = 0:8
I/[MALI][Gralloc]( 784): width = 57 mm (320.842102 dpi)
I/[MALI][Gralloc]( 784): height = 102 mm (318.745087 dpi)
I/[MALI][Gralloc]( 784): refresh rate = 60.00 Hz
I/[MALI][Gralloc]( 784): init_framebuffer va: 0xb561c000 mva: 0xfeb00000
E/M4U_L ( 784): ioctl MTK_M4U_T_M4UDrv_CONSTRUCT fail! 2, No such file or di
rectory
I/hwcomposer( 784): [DPY] Display Information:
I/hwcomposer( 784): [DPY] # fo devices : 1
I/hwcomposer( 784): [DPY] -----------------------------
I/hwcomposer( 784): [DPY] Device id : 0
I/hwcomposer( 784): [DPY] Width : 720
I/hwcomposer( 784): [DPY] Height : 1280
I/Netd ( 783): execIptablesCommand android_fork_execvp exit
I/hwcomposer( 784): [DPY] xdpi : 320.000000
I/Netd ( 783): execIptablesCommand android_fork_execvp enter
I/hwcomposer( 784): [DPY] ydpi : 320.000000
I/hwcomposer( 784): [DPY] vsync : 1
I/hwcomposer( 784): [DPY] refresh : 16507097
I/hwcomposer( 784): [DPY] connected : 1
I/hwcomposer( 784): [DPY] subtype : 0
W/hwcomposer( 784): [EVENT] HW VSync State(1)
W/hwcomposer( 784): [EVENT] Start to listen uevent, addr.nl_pid(784)
I/hwcomposer( 784): [WKR] Set priority to RR: 268435543
I/SurfaceFlinger( 784): Using composer version 1.2
I/hwcomposer( 784): [HWC] getConfigs Display(0)
I/hwcomposer( 784): [HWC] getAttributes Display(0)
I/hwcomposer( 784): [WKR] Set priority to RR: 268435543
I/hwcomposer( 784): [WKR] Set priority to RR: 268435543
I/hwcomposer( 784): [HWC] getConfigs Display(1)
I/hwcomposer( 784): [HWC] getAttributes Display(1)
E/hwcomposer( 784): [HWC] Failed to get display attributes (dpy=1 is not connec
ted)
W/MALI ( 784): __egl_set_error:110: [WARNING]Mali EGL errorcode: 3001
W/MALI ( 784): __egl_set_error:110: [WARNING]Mali EGL errorcode: 3001
W/MALI ( 784): __egl_set_error:110: [WARNING]Mali EGL errorcode: 3001
W/MALI ( 784): __egl_set_error:110: [WARNING]Mali EGL errorcode: 3001
W/SurfaceFlinger( 784): no suitable EGLConfig found, trying a simpler query
W/MALI ( 784): __egl_set_error:110: [WARNING]Mali EGL errorcode: 3001
W/MALI ( 784): __egl_set_error:110: [WARNING]Mali EGL errorcode: 3001
F/SurfaceFlinger( 784): no suitable EGLConfig found, giving up
F/libc ( 784): Fatal signal 6 (SIGABRT) at 0x00000310 (code=-6), thread 784
(surfaceflinger)
F/libc ( 784): Unable to open connection to debuggerd: Connection refused
I/Netd ( 783): execIptablesCommand android_fork_execvp exit
I/Netd ( 783): execIptablesCommand android_fork_execvp enter
I/Netd ( 783): execIptablesCommand android_fork_execvp exit
I/Netd ( 783): execIptablesCommand android_fork_execvp enter
I/Netd ( 820): Netd 1.0 starting
W/InterfaceController( 820): Warning (dlopen failed: library "/system/lib/libne
tcmdiface.so" not found) while opening the net interface command library
I/Netd ( 820): execIptablesCommand android_fork_execvp enter
I/Netd ( 820): execIptablesCommand android_fork_execvp exit
I/Netd ( 820): execIptablesCommand android_fork_execvp enter
I/Netd ( 820): execIptablesCommand android_fork_execvp exit
I/Netd ( 820): execIptablesCommand android_fork_execvp enter
I/Netd ( 820): execIptablesCommand android_fork_execvp exit
I/Netd ( 820): execIptablesCommand android_fork_execvp enter
I/Netd ( 820): execIptablesCommand android_fork_execvp exit
I/Netd ( 820): execIptablesCommand android_fork_execvp enter
I/SurfaceFlinger( 821): [int main(int, char**)] set surfaceflinger is in root u
ser, adjust caps for its thread
I/SurfaceFlinger( 821): SurfaceFlinger is starting
I/SurfaceFlinger( 821): SurfaceFlinger's main thread ready to run. Initializing
graphics H/W...
D/libEGL ( 821): loaded /system/lib/egl/libEGL_mali.so
D/libEGL ( 821): loaded /system/lib/egl/libGLESv1_CM_mali.so
D/libEGL ( 821): loaded /system/lib/egl/libGLESv2_mali.so
I/Netd ( 820): execIptablesCommand android_fork_execvp exit
I/Netd ( 820): execIptablesCommand android_fork_execvp enter
W/MALI ( 821): __egl_set_error:110: [WARNING]Mali EGL errorcode: 3003
W/libEGL ( 821): eglInitialize(0x1) failed (EGL_BAD_ALLOC)
I/[MALI][Gralloc]( 821): dlopen libsec_mem.so fail
I/gralloc ( 821): [Gralloc] refreshRate = 0, info.pixclock = ffffffff
I/gralloc ( 821): [Gralloc] info.upper_margin = ffffffff, info.lower_margin = f
fffffff
I/gralloc ( 821): [Gralloc] info.yres = 500, info.hsync_len = ffffffff
I/gralloc ( 821): [Gralloc] info.left_margin = ffffffff, info.right_margin = ff
ffffff
I/[MALI][Gralloc]( 821): ro_dpi: 320.000000
I/[MALI][Gralloc]( 821): using (fd=19)
I/[MALI][Gralloc]( 821): id = mtkfb
I/[MALI][Gralloc]( 821): xres = 720 px
I/[MALI][Gralloc]( 821): yres = 1280 px
I/[MALI][Gralloc]( 821): xres_virtual = 720 px
I/[MALI][Gralloc]( 821): yres_virtual = 3840 px
I/[MALI][Gralloc]( 821): bpp = 32
I/[MALI][Gralloc]( 821): r = 16:8
I/[MALI][Gralloc]( 821): g = 8:8
I/[MALI][Gralloc]( 821): b = 0:8
I/[MALI][Gralloc]( 821): width = 57 mm (320.842102 dpi)
I/[MALI][Gralloc]( 821): height = 102 mm (318.745087 dpi)
I/[MALI][Gralloc]( 821): refresh rate = 60.00 Hz
I/[MALI][Gralloc]( 821): init_framebuffer va: 0xb5565000 mva: 0xfeb00000
E/M4U_L ( 821): ioctl MTK_M4U_T_M4UDrv_CONSTRUCT fail! 2, No such file or di
rectory
I/hwcomposer( 821): [DPY] Display Information:
I/hwcomposer( 821): [DPY] # fo devices : 1
I/hwcomposer( 821): [DPY] -----------------------------
I/hwcomposer( 821): [DPY] Device id : 0
I/hwcomposer( 821): [DPY] Width : 720
I/hwcomposer( 821): [DPY] Height : 1280
I/hwcomposer( 821): [DPY] xdpi : 320.000000
I/hwcomposer( 821): [DPY] ydpi : 320.000000
I/hwcomposer( 821): [DPY] vsync : 1
I/Netd ( 820): execIptablesCommand android_fork_execvp exit
I/Netd ( 820): execIptablesCommand android_fork_execvp enter
I/hwcomposer( 821): [DPY] refresh : 16507097
I/hwcomposer( 821): [DPY] connected : 1
I/hwcomposer( 821): [DPY] subtype : 0
W/hwcomposer( 821): [EVENT] HW VSync State(1)
W/hwcomposer( 821): [EVENT] Start to listen uevent, addr.nl_pid(821)
I/hwcomposer( 821): [WKR] Set priority to RR: 268435543
I/hwcomposer( 821): [WKR] Set priority to RR: 268435543
I/hwcomposer( 821): [WKR] Set priority to RR: 268435543
I/hwcomposer( 821): [WKR] Set priority to RR: 268435543
I/hwcomposer( 821): [WKR] Set priority to RR: 268435543
I/SurfaceFlinger( 821): Using composer version 1.2
I/hwcomposer( 821): [HWC] getConfigs Display(0)
I/hwcomposer( 821): [HWC] getAttributes Display(0)
I/hwcomposer( 821): [HWC] getConfigs Display(1)
I/hwcomposer( 821): [HWC] getAttributes Display(1)
E/hwcomposer( 821): [HWC] Failed to get display attributes (dpy=1 is not connec
ted)
W/MALI ( 821): __egl_set_error:110: [WARNING]Mali EGL errorcode: 3001
W/MALI ( 821): __egl_set_error:110: [WARNING]Mali EGL errorcode: 3001
W/MALI ( 821): __egl_set_error:110: [WARNING]Mali EGL errorcode: 3001
W/MALI ( 821): __egl_set_error:110: [WARNING]Mali EGL errorcode: 3001
W/SurfaceFlinger( 821): no suitable EGLConfig found, trying a simpler query
W/MALI ( 821): __egl_set_error:110: [WARNING]Mali EGL errorcode: 3001
W/MALI ( 821): __egl_set_error:110: [WARNING]Mali EGL errorcode: 3001
F/SurfaceFlinger( 821): no suitable EGLConfig found, giving up
F/libc ( 821): Fatal signal 6 (SIGABRT) at 0x00000335 (code=-6), thread 821
(surfaceflinger)
F/libc ( 821): Unable to open connection to debuggerd: Connection refused
I/Netd ( 820): execIptablesCommand android_fork_execvp exit
I/Netd ( 820): execIptablesCommand android_fork_execvp enter
I/Netd ( 820): execIptablesCommand android_fork_execvp exit
I/Netd ( 820): execIptablesCommand android_fork_execvp enter
I/Netd ( 820): execIptablesCommand android_fork_execvp exit
I/Netd ( 820): execIptablesCommand android_fork_execvp enter
I/Netd ( 820): execIptablesCommand android_fork_execvp exit
I/Netd ( 820): execIptablesCommand android_fork_execvp enter
I/sn ( 191): Retry 5
I/sn ( 191): Fail to access err=No such file or directory
I/sn ( 191): Fail to access err=No such file or directory
I/sn ( 191): Fail to access err=No such file or directory
I/sn ( 191): Check all possible paths
I/Netd ( 858): Netd 1.0 starting
W/InterfaceController( 858): Warning (dlopen failed: library "/system/lib/libne
tcmdiface.so" not found) while opening the net interface command library
I/Netd ( 858): execIptablesCommand android_fork_execvp enter
D/ADB_SERVICES( 198): adb fdevent_process list (12) (18)
D/ADB_SERVICES( 198): adb socket read list (18)
D/ADB_SERVICES( 198): read_data=11945
D/ADB_SERVICES( 198): max_read_time=0.000080 max_send_time=0.000063
D/ADB_SERVICES( 198): adb local_socket_ready list (18)
I/Netd ( 858): execIptablesCommand android_fork_execvp exit
I/Netd ( 858): execIptablesCommand android_fork_execvp enter
I/Netd ( 858): execIptablesCommand android_fork_execvp exit
I/Netd ( 858): execIptablesCommand android_fork_execvp enter
I/Netd ( 858): execIptablesCommand android_fork_execvp exit
I/Netd ( 858): execIptablesCommand android_fork_execvp enter
I/Netd ( 858): execIptablesCommand android_fork_execvp exit
I/Netd ( 858): execIptablesCommand android_fork_execvp enter
I/Netd ( 858): execIptablesCommand android_fork_execvp exit
I/Netd ( 858): execIptablesCommand android_fork_execvp enter
I/Netd ( 858): execIptablesCommand android_fork_execvp exit
I/Netd ( 858): execIptablesCommand android_fork_execvp enter
I/Netd ( 858): execIptablesCommand android_fork_execvp exit
I/Netd ( 858): execIptablesCommand android_fork_execvp enter
I/Netd ( 858): execIptablesCommand android_fork_execvp exit
I/Netd ( 858): execIptablesCommand android_fork_execvp enter
I/SurfaceFlinger( 859): [int main(int, char**)] set surfaceflinger is in root u
ser, adjust caps for its thread
I/SurfaceFlinger( 859): SurfaceFlinger is starting
I/SurfaceFlinger( 859): SurfaceFlinger's main thread ready to run. Initializing
graphics H/W...
D/libEGL ( 859): loaded /system/lib/egl/libEGL_mali.so
D/libEGL ( 859): loaded /system/lib/egl/libGLESv1_CM_mali.so
I/Netd ( 858): execIptablesCommand android_fork_execvp exit
I/Netd ( 858): execIptablesCommand android_fork_execvp enter
I/Netd ( 858): execIptablesCommand android_fork_execvp exit
I/Netd ( 858): execIptablesCommand android_fork_execvp enter
D/libEGL ( 859): loaded /system/lib/egl/libGLESv2_mali.so
I/Netd ( 858): execIptablesCommand android_fork_execvp exit
I/Netd ( 858): execIptablesCommand android_fork_execvp enter
W/MALI ( 859): __egl_set_error:110: [WARNING]Mali EGL errorcode: 3003
W/libEGL ( 859): eglInitialize(0x1) failed (EGL_BAD_ALLOC)
I/[MALI][Gralloc]( 859): dlopen libsec_mem.so fail
I/gralloc ( 859): [Gralloc] refreshRate = 0, info.pixclock = ffffffff
I/gralloc ( 859): [Gralloc] info.upper_margin = ffffffff, info.lower_margin = f
fffffff
I/gralloc ( 859): [Gralloc] info.yres = 500, info.hsync_len = ffffffff
I/gralloc ( 859): [Gralloc] info.left_margin = ffffffff, info.right_margin = ff
ffffff
I/[MALI][Gralloc]( 859): ro_dpi: 320.000000
I/[MALI][Gralloc]( 859): using (fd=19)
I/[MALI][Gralloc]( 859): id = mtkfb
I/[MALI][Gralloc]( 859): xres = 720 px
I/[MALI][Gralloc]( 859): yres = 1280 px
I/[MALI][Gralloc]( 859): xres_virtual = 720 px
I/[MALI][Gralloc]( 859): yres_virtual = 3840 px
I/[MALI][Gralloc]( 859): bpp = 32
I/[MALI][Gralloc]( 859): r = 16:8
I/[MALI][Gralloc]( 859): g = 8:8
I/[MALI][Gralloc]( 859): b = 0:8
I/[MALI][Gralloc]( 859): width = 57 mm (320.842102 dpi)
I/[MALI][Gralloc]( 859): height = 102 mm (318.745087 dpi)
I/[MALI][Gralloc]( 859): refresh rate = 60.00 Hz
I/[MALI][Gralloc]( 859): init_framebuffer va: 0xb55c4000 mva: 0xfeb00000
I/Netd ( 858): execIptablesCommand android_fork_execvp exit
I/Netd ( 858): execIptablesCommand android_fork_execvp enter
Logcat Part 2
E/M4U_L ( 859): ioctl MTK_M4U_T_M4UDrv_CONSTRUCT fail! 2, No such file or di
rectory
I/hwcomposer( 859): [DPY] Display Information:
I/hwcomposer( 859): [DPY] # fo devices : 1
I/hwcomposer( 859): [DPY] -----------------------------
I/hwcomposer( 859): [DPY] Device id : 0
I/hwcomposer( 859): [DPY] Width : 720
I/hwcomposer( 859): [DPY] Height : 1280
I/hwcomposer( 859): [DPY] xdpi : 320.000000
I/hwcomposer( 859): [DPY] ydpi : 320.000000
I/hwcomposer( 859): [DPY] vsync : 1
I/hwcomposer( 859): [DPY] refresh : 16507097
I/hwcomposer( 859): [DPY] connected : 1
I/hwcomposer( 859): [DPY] subtype : 0
W/hwcomposer( 859): [EVENT] HW VSync State(1)
W/hwcomposer( 859): [EVENT] Start to listen uevent, addr.nl_pid(859)
I/hwcomposer( 859): [WKR] Set priority to RR: 268435543
I/hwcomposer( 859): [WKR] Set priority to RR: 268435543
I/hwcomposer( 859): [WKR] Set priority to RR: 268435543
I/hwcomposer( 859): [WKR] Set priority to RR: 268435543
I/SurfaceFlinger( 859): Using composer version 1.2
I/hwcomposer( 859): [HWC] getConfigs Display(0)
I/hwcomposer( 859): [HWC] getAttributes Display(0)
I/hwcomposer( 859): [HWC] getConfigs Display(1)
I/hwcomposer( 859): [HWC] getAttributes Display(1)
E/hwcomposer( 859): [HWC] Failed to get display attributes (dpy=1 is not connec
ted)
W/MALI ( 859): __egl_set_error:110: [WARNING]Mali EGL errorcode: 3001
W/MALI ( 859): __egl_set_error:110: [WARNING]Mali EGL errorcode: 3001
W/MALI ( 859): __egl_set_error:110: [WARNING]Mali EGL errorcode: 3001
W/MALI ( 859): __egl_set_error:110: [WARNING]Mali EGL errorcode: 3001
W/SurfaceFlinger( 859): no suitable EGLConfig found, trying a simpler query
W/MALI ( 859): __egl_set_error:110: [WARNING]Mali EGL errorcode: 3001
W/MALI ( 859): __egl_set_error:110: [WARNING]Mali EGL errorcode: 3001
F/SurfaceFlinger( 859): no suitable EGLConfig found, giving up
F/libc ( 859): Fatal signal 6 (SIGABRT) at 0x0000035b (code=-6), thread 859
(surfaceflinger)
F/libc ( 859): Unable to open connection to debuggerd: Connection refused
I/Netd ( 858): execIptablesCommand android_fork_execvp exit
I/Netd ( 858): execIptablesCommand android_fork_execvp enter
I/Netd ( 858): execIptablesCommand android_fork_execvp exit
I/Netd ( 858): execIptablesCommand android_fork_execvp enter
I/Netd ( 858): execIptablesCommand android_fork_execvp exit
I/Netd ( 858): execIptablesCommand android_fork_execvp enter
I/Netd ( 858): execIptablesCommand android_fork_execvp exit
I/Netd ( 858): execIptablesCommand android_fork_execvp enter
I/iptables( 858): iptables: Chain already exists.
I/iptables( 858): iptables terminated by exit(1)
I/Netd ( 858): execIptablesCommand android_fork_execvp exit
E/Netd ( 858): exec() res=0, status=256 for /system/bin/iptables -t filter -
N firewall
I/Netd ( 858): execIptablesCommand android_fork_execvp enter
I/ip6tables( 858): ip6tables: Chain already exists.
I/ip6tables( 858): ip6tables terminated by exit(1)
I/Netd ( 858): execIptablesCommand android_fork_execvp exit
E/Netd ( 858): exec() res=0, status=256 for /system/bin/ip6tables -t filter
-N firewall
I/Netd ( 858): execIptablesCommand android_fork_execvp enter
D/libEGL ( 784): loaded /system/lib/egl/libEGL_mali.so
D/libEGL ( 784): loaded /system/lib/egl/libGLESv1_CM_mali.so
I/Netd ( 783): execIptablesCommand android_fork_execvp exit
I/Netd ( 783): execIptablesCommand android_fork_execvp enter
D/libEGL ( 784): loaded /system/lib/egl/libGLESv2_mali.so
I/Netd ( 783): execIptablesCommand android_fork_execvp exit
I/Netd ( 783): execIptablesCommand android_fork_execvp enter
W/MALI ( 784): __egl_set_error:110: [WARNING]Mali EGL errorcode: 3003
W/libEGL ( 784): eglInitialize(0x1) failed (EGL_BAD_ALLOC)
I/Netd ( 783): execIptablesCommand android_fork_execvp exit
I/Netd ( 783): execIptablesCommand android_fork_execvp enter
I/[MALI][Gralloc]( 784): dlopen libsec_mem.so fail
I/gralloc ( 784): [Gralloc] refreshRate = 0, info.pixclock = ffffffff
I/gralloc ( 784): [Gralloc] info.upper_margin = ffffffff, info.lower_margin = f
fffffff
I/gralloc ( 784): [Gralloc] info.yres = 500, info.hsync_len = ffffffff
I/gralloc ( 784): [Gralloc] info.left_margin = ffffffff, info.right_margin = ff
ffffff
I/[MALI][Gralloc]( 784): ro_dpi: 320.000000
I/[MALI][Gralloc]( 784): using (fd=19)
I/[MALI][Gralloc]( 784): id = mtkfb
I/[MALI][Gralloc]( 784): xres = 720 px
I/[MALI][Gralloc]( 784): yres = 1280 px
I/[MALI][Gralloc]( 784): xres_virtual = 720 px
I/[MALI][Gralloc]( 784): yres_virtual = 3840 px
I/[MALI][Gralloc]( 784): bpp = 32
I/[MALI][Gralloc]( 784): r = 16:8
I/[MALI][Gralloc]( 784): g = 8:8
I/[MALI][Gralloc]( 784): b = 0:8
I/[MALI][Gralloc]( 784): width = 57 mm (320.842102 dpi)
I/[MALI][Gralloc]( 784): height = 102 mm (318.745087 dpi)
I/[MALI][Gralloc]( 784): refresh rate = 60.00 Hz
I/[MALI][Gralloc]( 784): init_framebuffer va: 0xb561c000 mva: 0xfeb00000
E/M4U_L ( 784): ioctl MTK_M4U_T_M4UDrv_CONSTRUCT fail! 2, No such file or di
rectory
I/hwcomposer( 784): [DPY] Display Information:
I/hwcomposer( 784): [DPY] # fo devices : 1
I/hwcomposer( 784): [DPY] -----------------------------
I/hwcomposer( 784): [DPY] Device id : 0
I/hwcomposer( 784): [DPY] Width : 720
I/hwcomposer( 784): [DPY] Height : 1280
I/Netd ( 783): execIptablesCommand android_fork_execvp exit
I/hwcomposer( 784): [DPY] xdpi : 320.000000
I/Netd ( 783): execIptablesCommand android_fork_execvp enter
I/hwcomposer( 784): [DPY] ydpi : 320.000000
I/hwcomposer( 784): [DPY] vsync : 1
I/hwcomposer( 784): [DPY] refresh : 16507097
I/hwcomposer( 784): [DPY] connected : 1
I/hwcomposer( 784): [DPY] subtype : 0
W/hwcomposer( 784): [EVENT] HW VSync State(1)
W/hwcomposer( 784): [EVENT] Start to listen uevent, addr.nl_pid(784)
I/hwcomposer( 784): [WKR] Set priority to RR: 268435543
I/SurfaceFlinger( 784): Using composer version 1.2
I/hwcomposer( 784): [HWC] getConfigs Display(0)
I/hwcomposer( 784): [HWC] getAttributes Display(0)
I/hwcomposer( 784): [WKR] Set priority to RR: 268435543
I/hwcomposer( 784): [WKR] Set priority to RR: 268435543
I/hwcomposer( 784): [HWC] getConfigs Display(1)
I/hwcomposer( 784): [HWC] getAttributes Display(1)
E/hwcomposer( 784): [HWC] Failed to get display attributes (dpy=1 is not connec
ted)
W/MALI ( 784): __egl_set_error:110: [WARNING]Mali EGL errorcode: 3001
W/MALI ( 784): __egl_set_error:110: [WARNING]Mali EGL errorcode: 3001
W/MALI ( 784): __egl_set_error:110: [WARNING]Mali EGL errorcode: 3001
W/MALI ( 784): __egl_set_error:110: [WARNING]Mali EGL errorcode: 3001
W/SurfaceFlinger( 784): no suitable EGLConfig found, trying a simpler query
W/MALI ( 784): __egl_set_error:110: [WARNING]Mali EGL errorcode: 3001
W/MALI ( 784): __egl_set_error:110: [WARNING]Mali EGL errorcode: 3001
F/SurfaceFlinger( 784): no suitable EGLConfig found, giving up
F/libc ( 784): Fatal signal 6 (SIGABRT) at 0x00000310 (code=-6), thread 784
(surfaceflinger)
F/libc ( 784): Unable to open connection to debuggerd: Connection refused
I/Netd ( 783): execIptablesCommand android_fork_execvp exit
I/Netd ( 783): execIptablesCommand android_fork_execvp enter
I/Netd ( 783): execIptablesCommand android_fork_execvp exit
I/Netd ( 783): execIptablesCommand android_fork_execvp enter
I/Netd ( 820): Netd 1.0 starting
W/InterfaceController( 820): Warning (dlopen failed: library "/system/lib/libne
tcmdiface.so" not found) while opening the net interface command library
I/Netd ( 820): execIptablesCommand android_fork_execvp enter
I/Netd ( 820): execIptablesCommand android_fork_execvp exit
I/Netd ( 820): execIptablesCommand android_fork_execvp enter
I/Netd ( 820): execIptablesCommand android_fork_execvp exit
I/Netd ( 820): execIptablesCommand android_fork_execvp enter
I/Netd ( 820): execIptablesCommand android_fork_execvp exit
I/Netd ( 820): execIptablesCommand android_fork_execvp enter
I/Netd ( 820): execIptablesCommand android_fork_execvp exit
I/Netd ( 820): execIptablesCommand android_fork_execvp enter
I/SurfaceFlinger( 821): [int main(int, char**)] set surfaceflinger is in root u
ser, adjust caps for its thread
I/SurfaceFlinger( 821): SurfaceFlinger is starting
I/SurfaceFlinger( 821): SurfaceFlinger's main thread ready to run. Initializing
graphics H/W...
D/libEGL ( 821): loaded /system/lib/egl/libEGL_mali.so
D/libEGL ( 821): loaded /system/lib/egl/libGLESv1_CM_mali.so
D/libEGL ( 821): loaded /system/lib/egl/libGLESv2_mali.so
I/Netd ( 820): execIptablesCommand android_fork_execvp exit
I/Netd ( 820): execIptablesCommand android_fork_execvp enter
W/MALI ( 821): __egl_set_error:110: [WARNING]Mali EGL errorcode: 3003
W/libEGL ( 821): eglInitialize(0x1) failed (EGL_BAD_ALLOC)
I/[MALI][Gralloc]( 821): dlopen libsec_mem.so fail
I/gralloc ( 821): [Gralloc] refreshRate = 0, info.pixclock = ffffffff
I/gralloc ( 821): [Gralloc] info.upper_margin = ffffffff, info.lower_margin = f
fffffff
I/gralloc ( 821): [Gralloc] info.yres = 500, info.hsync_len = ffffffff
I/gralloc ( 821): [Gralloc] info.left_margin = ffffffff, info.right_margin = ff
ffffff
I/[MALI][Gralloc]( 821): ro_dpi: 320.000000
I/[MALI][Gralloc]( 821): using (fd=19)
I/[MALI][Gralloc]( 821): id = mtkfb
I/[MALI][Gralloc]( 821): xres = 720 px
I/[MALI][Gralloc]( 821): yres = 1280 px
I/[MALI][Gralloc]( 821): xres_virtual = 720 px
I/[MALI][Gralloc]( 821): yres_virtual = 3840 px
I/[MALI][Gralloc]( 821): bpp = 32
I/[MALI][Gralloc]( 821): r = 16:8
I/[MALI][Gralloc]( 821): g = 8:8
I/[MALI][Gralloc]( 821): b = 0:8
I/[MALI][Gralloc]( 821): width = 57 mm (320.842102 dpi)
I/[MALI][Gralloc]( 821): height = 102 mm (318.745087 dpi)
I/[MALI][Gralloc]( 821): refresh rate = 60.00 Hz
I/[MALI][Gralloc]( 821): init_framebuffer va: 0xb5565000 mva: 0xfeb00000
E/M4U_L ( 821): ioctl MTK_M4U_T_M4UDrv_CONSTRUCT fail! 2, No such file or di
rectory
I/hwcomposer( 821): [DPY] Display Information:
I/hwcomposer( 821): [DPY] # fo devices : 1
I/hwcomposer( 821): [DPY] -----------------------------
I/hwcomposer( 821): [DPY] Device id : 0
I/hwcomposer( 821): [DPY] Width : 720
I/hwcomposer( 821): [DPY] Height : 1280
I/hwcomposer( 821): [DPY] xdpi : 320.000000
I/hwcomposer( 821): [DPY] ydpi : 320.000000
I/hwcomposer( 821): [DPY] vsync : 1
I/Netd ( 820): execIptablesCommand android_fork_execvp exit
I/Netd ( 820): execIptablesCommand android_fork_execvp enter
I/hwcomposer( 821): [DPY] refresh : 16507097
I/hwcomposer( 821): [DPY] connected : 1
I/hwcomposer( 821): [DPY] subtype : 0
W/hwcomposer( 821): [EVENT] HW VSync State(1)
W/hwcomposer( 821): [EVENT] Start to listen uevent, addr.nl_pid(821)
I/hwcomposer( 821): [WKR] Set priority to RR: 268435543
I/hwcomposer( 821): [WKR] Set priority to RR: 268435543
I/hwcomposer( 821): [WKR] Set priority to RR: 268435543
I/hwcomposer( 821): [WKR] Set priority to RR: 268435543
I/hwcomposer( 821): [WKR] Set priority to RR: 268435543
I/SurfaceFlinger( 821): Using composer version 1.2
I/hwcomposer( 821): [HWC] getConfigs Display(0)
I/hwcomposer( 821): [HWC] getAttributes Display(0)
I/hwcomposer( 821): [HWC] getConfigs Display(1)
I/hwcomposer( 821): [HWC] getAttributes Display(1)
E/hwcomposer( 821): [HWC] Failed to get display attributes (dpy=1 is not connec
ted)
W/MALI ( 821): __egl_set_error:110: [WARNING]Mali EGL errorcode: 3001
W/MALI ( 821): __egl_set_error:110: [WARNING]Mali EGL errorcode: 3001
W/MALI ( 821): __egl_set_error:110: [WARNING]Mali EGL errorcode: 3001
W/MALI ( 821): __egl_set_error:110: [WARNING]Mali EGL errorcode: 3001
W/SurfaceFlinger( 821): no suitable EGLConfig found, trying a simpler query
W/MALI ( 821): __egl_set_error:110: [WARNING]Mali EGL errorcode: 3001
W/MALI ( 821): __egl_set_error:110: [WARNING]Mali EGL errorcode: 3001
F/SurfaceFlinger( 821): no suitable EGLConfig found, giving up
F/libc ( 821): Fatal signal 6 (SIGABRT) at 0x00000335 (code=-6), thread 821
(surfaceflinger)
F/libc ( 821): Unable to open connection to debuggerd: Connection refused
I/Netd ( 820): execIptablesCommand android_fork_execvp exit
I/Netd ( 820): execIptablesCommand android_fork_execvp enter
I/Netd ( 820): execIptablesCommand android_fork_execvp exit
I/Netd ( 820): execIptablesCommand android_fork_execvp enter
I/Netd ( 820): execIptablesCommand android_fork_execvp exit
I/Netd ( 820): execIptablesCommand android_fork_execvp enter
I/Netd ( 820): execIptablesCommand android_fork_execvp exit
I/Netd ( 820): execIptablesCommand android_fork_execvp enter
I/sn ( 191): Retry 5
I/sn ( 191): Fail to access err=No such file or directory
I/sn ( 191): Fail to access err=No such file or directory
I/sn ( 191): Fail to access err=No such file or directory
I/sn ( 191): Check all possible paths
I/Netd ( 858): Netd 1.0 starting
W/InterfaceController( 858): Warning (dlopen failed: library "/system/lib/libne
tcmdiface.so" not found) while opening the net interface command library
I/Netd ( 858): execIptablesCommand android_fork_execvp enter
D/ADB_SERVICES( 198): adb fdevent_process list (12) (18)
D/ADB_SERVICES( 198): adb socket read list (18)
D/ADB_SERVICES( 198): read_data=11945
D/ADB_SERVICES( 198): max_read_time=0.000080 max_send_time=0.000063
D/ADB_SERVICES( 198): adb local_socket_ready list (18)
I/Netd ( 858): execIptablesCommand android_fork_execvp exit
I/Netd ( 858): execIptablesCommand android_fork_execvp enter
I/Netd ( 858): execIptablesCommand android_fork_execvp exit
I/Netd ( 858): execIptablesCommand android_fork_execvp enter
I/Netd ( 858): execIptablesCommand android_fork_execvp exit
I/Netd ( 858): execIptablesCommand android_fork_execvp enter
I/Netd ( 858): execIptablesCommand android_fork_execvp exit
I/Netd ( 858): execIptablesCommand android_fork_execvp enter
I/Netd ( 858): execIptablesCommand android_fork_execvp exit
I/Netd ( 858): execIptablesCommand android_fork_execvp enter
I/Netd ( 858): execIptablesCommand android_fork_execvp exit
I/Netd ( 858): execIptablesCommand android_fork_execvp enter
I/Netd ( 858): execIptablesCommand android_fork_execvp exit
I/Netd ( 858): execIptablesCommand android_fork_execvp enter
I/Netd ( 858): execIptablesCommand android_fork_execvp exit
I/Netd ( 858): execIptablesCommand android_fork_execvp enter
I/SurfaceFlinger( 859): [int main(int, char**)] set surfaceflinger is in root u
ser, adjust caps for its thread
I/SurfaceFlinger( 859): SurfaceFlinger is starting
I/SurfaceFlinger( 859): SurfaceFlinger's main thread ready to run. Initializing
graphics H/W...
D/libEGL ( 859): loaded /system/lib/egl/libEGL_mali.so
D/libEGL ( 859): loaded /system/lib/egl/libGLESv1_CM_mali.so
I/Netd ( 858): execIptablesCommand android_fork_execvp exit
I/Netd ( 858): execIptablesCommand android_fork_execvp enter
I/Netd ( 858): execIptablesCommand android_fork_execvp exit
I/Netd ( 858): execIptablesCommand android_fork_execvp enter
D/libEGL ( 859): loaded /system/lib/egl/libGLESv2_mali.so
I/Netd ( 858): execIptablesCommand android_fork_execvp exit
I/Netd ( 858): execIptablesCommand android_fork_execvp enter
W/MALI ( 859): __egl_set_error:110: [WARNING]Mali EGL errorcode: 3003
W/libEGL ( 859): eglInitialize(0x1) failed (EGL_BAD_ALLOC)
I/[MALI][Gralloc]( 859): dlopen libsec_mem.so fail
I/gralloc ( 859): [Gralloc] refreshRate = 0, info.pixclock = ffffffff
I/gralloc ( 859): [Gralloc] info.upper_margin = ffffffff, info.lower_margin = f
fffffff
I/gralloc ( 859): [Gralloc] info.yres = 500, info.hsync_len = ffffffff
I/gralloc ( 859): [Gralloc] info.left_margin = ffffffff, info.right_margin = ff
ffffff
I/[MALI][Gralloc]( 859): ro_dpi: 320.000000
I/[MALI][Gralloc]( 859): using (fd=19)
I/[MALI][Gralloc]( 859): id = mtkfb
I/[MALI][Gralloc]( 859): xres = 720 px
I/[MALI][Gralloc]( 859): yres = 1280 px
I/[MALI][Gralloc]( 859): xres_virtual = 720 px
I/[MALI][Gralloc]( 859): yres_virtual = 3840 px
I/[MALI][Gralloc]( 859): bpp = 32
I/[MALI][Gralloc]( 859): r = 16:8
I/[MALI][Gralloc]( 859): g = 8:8
I/[MALI][Gralloc]( 859): b = 0:8
I/[MALI][Gralloc]( 859): width = 57 mm (320.842102 dpi)
I/[MALI][Gralloc]( 859): height = 102 mm (318.745087 dpi)
I/[MALI][Gralloc]( 859): refresh rate = 60.00 Hz
I/[MALI][Gralloc]( 859): init_framebuffer va: 0xb55c4000 mva: 0xfeb00000
I/Netd ( 858): execIptablesCommand android_fork_execvp exit
I/Netd ( 858): execIptablesCommand android_fork_execvp enter
E/M4U_L ( 859): ioctl MTK_M4U_T_M4UDrv_CONSTRUCT fail! 2, No such file or di
rectory
I/hwcomposer( 859): [DPY] Display Information:
I/hwcomposer( 859): [DPY] # fo devices : 1
I/hwcomposer( 859): [DPY] -----------------------------
I/hwcomposer( 859): [DPY] Device id : 0
I/hwcomposer( 859): [DPY] Width : 720
I/hwcomposer( 859): [DPY] Height : 1280
I/hwcomposer( 859): [DPY] xdpi : 320.000000
I/hwcomposer( 859): [DPY] ydpi : 320.000000
I/hwcomposer( 859): [DPY] vsync : 1
I/hwcomposer( 859): [DPY] refresh : 16507097
I/hwcomposer( 859): [DPY] connected : 1
I/hwcomposer( 859): [DPY] subtype : 0
W/hwcomposer( 859): [EVENT] HW VSync State(1)
W/hwcomposer( 859): [EVENT] Start to listen uevent, addr.nl_pid(859)
I/hwcomposer( 859): [WKR] Set priority to RR: 268435543
I/hwcomposer( 859): [WKR] Set priority to RR: 268435543
I/hwcomposer( 859): [WKR] Set priority to RR: 268435543
I/hwcomposer( 859): [WKR] Set priority to RR: 268435543
I/SurfaceFlinger( 859): Using composer version 1.2
I/hwcomposer( 859): [HWC] getConfigs Display(0)
I/hwcomposer( 859): [HWC] getAttributes Display(0)
I/hwcomposer( 859): [HWC] getConfigs Display(1)
I/hwcomposer( 859): [HWC] getAttributes Display(1)
E/hwcomposer( 859): [HWC] Failed to get display attributes (dpy=1 is not connec
ted)
W/MALI ( 859): __egl_set_error:110: [WARNING]Mali EGL errorcode: 3001
W/MALI ( 859): __egl_set_error:110: [WARNING]Mali EGL errorcode: 3001
W/MALI ( 859): __egl_set_error:110: [WARNING]Mali EGL errorcode: 3001
W/MALI ( 859): __egl_set_error:110: [WARNING]Mali EGL errorcode: 3001
W/SurfaceFlinger( 859): no suitable EGLConfig found, trying a simpler query
W/MALI ( 859): __egl_set_error:110: [WARNING]Mali EGL errorcode: 3001
W/MALI ( 859): __egl_set_error:110: [WARNING]Mali EGL errorcode: 3001
F/SurfaceFlinger( 859): no suitable EGLConfig found, giving up
F/libc ( 859): Fatal signal 6 (SIGABRT) at 0x0000035b (code=-6), thread 859
(surfaceflinger)
F/libc ( 859): Unable to open connection to debuggerd: Connection refused
I/Netd ( 858): execIptablesCommand android_fork_execvp exit
I/Netd ( 858): execIptablesCommand android_fork_execvp enter
I/Netd ( 858): execIptablesCommand android_fork_execvp exit
I/Netd ( 858): execIptablesCommand android_fork_execvp enter
I/Netd ( 858): execIptablesCommand android_fork_execvp exit
I/Netd ( 858): execIptablesCommand android_fork_execvp enter
I/Netd ( 858): execIptablesCommand android_fork_execvp exit
I/Netd ( 858): execIptablesCommand android_fork_execvp enter
I/iptables( 858): iptables: Chain already exists.
I/iptables( 858): iptables terminated by exit(1)
I/Netd ( 858): execIptablesCommand android_fork_execvp exit
E/Netd ( 858): exec() res=0, status=256 for /system/bin/iptables -t filter -
N firewall
I/Netd ( 858): execIptablesCommand android_fork_execvp enter
I/ip6tables( 858): ip6tables: Chain already exists.
I/ip6tables( 858): ip6tables terminated by exit(1)
I/Netd ( 858): execIptablesCommand android_fork_execvp exit
E/Netd ( 858): exec() res=0, status=256 for /system/bin/ip6tables -t filter
-N firewall
I/Netd ( 858): execIptablesCommand android_fork_execvp enter
[/SIZE][/B]
Now please help me! As I am clueless where to begin or where to end! :crying::silly:
Fixed it
Moderator please close this thread
Sent from my bobobibi
Tech N You said:
Fixed it
Moderator please close this thread
Click to expand...
Click to collapse
How did you fix it?
Bormental said:
How did you fix it?
Click to expand...
Click to collapse
LIBEGL errors are gpu ones.
I replaced libmali.so and it worked
Sent from 8x-1000 Using XXX ROM (Xceptional XPERIA Xperiance)
Tech N You said:
LIBEGL errors are gpu ones.
I replaced libmali.so and it worked
Click to expand...
Click to collapse
it works. Thank you!
Bormental said:
it works. Thank you!
Click to expand...
Click to collapse
Glad I helped you
Sent from 8x-1000 Using XXX ROM (Xceptional XPERIA Xperiance)