Hi..
Sorry about double post. I got some problems with Wireless on my Galaxy S2. Problem is, i cant turn it on. After i try to turn it on phone gets laggy. Sometimes it turns on, does the scan (doesn't show AP) and turns off. sometimes after some time it shows up "Error" under Wireless state. Problem appeared before phone where rooted. Never been droped or something like that. Before rooting by entering *#*#232338#*#* i where unable to see MAC Adress, after rooting can see MAC Address. But wireless doesnt work (Wireless/Wireless tether). Any ideas how to solve it? Have seen ppls on forum have same problem. Solution to reinstall radio drivers. Anyone can guide me how to do it? Baseband I9100XXKI1, Kernel 2.6.35.7-I9100XXKI4-CL575468 [email protected] #2, Build number GINGERBREAD.XWKI4
Have tried wipe cache, did factory reset.
Thanks for any advice.
Have Google something, but don't know how to use that info i fount. Here is the trick should fix it, but no explanation about how to do it.
Problem is related to wpa_supplicant crash issue..
That post is just stating that you need those .so files from a stock firmware pushed into your system/etc/ folder.
Sent from my GT-I9100 using xda premium
Any Ideas how to solve this issue? Phone without Internet is pretty much the same as pc..
Here is CatLog when i start WiFi
Code:
01-01 21:54:56.265 E/WifiSettingButton(2936): activate()
01-01 21:54:56.265 E/AudioPolicyManager(2589): getParamFromPolicy
01-01 21:54:56.265 E/AudioPolicyManager(2589): getSituationVolume
01-01 21:54:56.270 E/yamaha::media::Parameters(2589): SalesCode = XEU
01-01 21:54:56.280 E/WifiHW (2809): Cannot open "/data/.cid.info": No such file or directory
01-01 21:54:56.305 E/WifiSettingButton(2936): onReceive()-S:2
01-01 21:54:58.500 E/lights (2809): write_int: path /sys/devices/virtual/misc/melfas_touchkey/brightness, value 2
01-01 21:55:00.769 E/WifiHW (2809): wifi_start_supplicant: pi->serial=117440514, serial=0
01-01 21:55:00.795 E/WifiHW (2809): wifi_connect_to_supplicant:IFACE_DIR(/data/misc/wifi), iface(eth0), ifname(/data/misc/wifi/eth0)
01-01 21:55:00.795 E/WifiHW (2809): wifi_connect_to_supplicant: ifname(/data/misc/wifi/eth0)
01-01 21:55:00.950 E/WifiSettingButton(2936): onReceive()-S:3
01-01 21:55:00.970 E/wpa_supplicant(6703): ioctl[SIOCGIFFLAGS]
01-01 21:55:00.995 E/WifiHW (2809): wifi_connect_to_supplicant:ctrl_conn is NULL!!
01-01 21:55:00.995 E/wpa_supplicant(6703): ioctl[SIOCGIFFLAGS]
01-01 21:55:01.020 E/wpa_supplicant(6703): ioctl[SIOCGIFFLAGS]
01-01 21:55:01.045 E/wpa_supplicant(6703): ioctl[SIOCGIFFLAGS]
01-01 21:55:01.055 E/wpa_supplicant(6703): ioctl[SIOCGIFFLAGS]
01-01 21:55:01.080 E/wpa_supplicant(6703): ioctl[SIOCGIFFLAGS]
01-01 21:55:01.080 E/wpa_supplicant(6703): ioctl[SIOCGIFFLAGS]
01-01 21:55:01.080 E/wpa_supplicant(6703): ioctl[SIOCGIFFLAGS]
01-01 21:55:01.080 E/wpa_supplicant(6703): ioctl[SIOCGIFFLAGS]
01-01 21:55:01.085 E/wpa_supplicant(6703): ioctl[SIOCGIFFLAGS]
01-01 21:55:01.095 E/WifiHW (2809): wifi_connect_to_supplicant:ctrl_conn is NULL!!
01-01 21:55:01.125 E/wpa_supplicant(6703): ioctl[SIOCSIWPMKSA]
01-01 21:55:01.135 E/wpa_supplicant(6703): ioctl[SIOCSIWMODE]
01-01 21:55:01.140 E/wpa_supplicant(6703): ioctl[SIOCGIRANGE]
01-01 21:55:01.155 E/wpa_supplicant(6703): ioctl[SIOCGIWMODE]
01-01 21:55:01.165 E/wpa_supplicant(6703): ioctl[SIOCSIWAP]
01-01 21:55:01.185 E/wpa_supplicant(6703): ioctl[SIOCSIWENCODEEXT]
01-01 21:55:01.185 E/wpa_supplicant(6703): ioctl[SIOCSIWENCODE]
01-01 21:55:01.185 E/wpa_supplicant(6703): ioctl[SIOCSIWENCODEEXT]
01-01 21:55:01.185 E/wpa_supplicant(6703): ioctl[SIOCSIWENCODE]
01-01 21:55:01.185 E/wpa_supplicant(6703): ioctl[SIOCSIWENCODEEXT]
01-01 21:55:01.185 E/wpa_supplicant(6703): ioctl[SIOCSIWENCODE]
01-01 21:55:01.185 E/wpa_supplicant(6703): ioctl[SIOCSIWENCODEEXT]
01-01 21:55:01.185 E/wpa_supplicant(6703): ioctl[SIOCSIWENCODE]
01-01 21:55:01.185 E/wpa_supplicant(6703): Failed to disable WPA in the driver.
01-01 21:55:01.185 E/wpa_supplicant(6703): ioctl[SIOCGIWMODE]
01-01 21:55:01.185 E/wpa_supplicant(6703): ioctl[SIOCSIWAP]
01-01 21:55:01.185 E/wpa_supplicant(6703): ioctl[SIOCGIFFLAGS]
01-01 21:55:01.205 E/WifiHW (2809): wifi_connect_to_supplicant:ctrl_conn is NULL!!
01-01 21:55:01.310 E/WifiHW (2809): wifi_connect_to_supplicant:ctrl_conn is NULL!!
01-01 21:55:01.410 E/WifiHW (2809): wifi_connect_to_supplicant:ctrl_conn is NULL!!
01-01 21:55:01.510 E/WifiHW (2809): wifi_connect_to_supplicant:ctrl_conn is NULL!!
01-01 21:55:01.610 E/WifiHW (2809): wifi_connect_to_supplicant:ctrl_conn is NULL!!
01-01 21:55:01.710 E/WifiHW (2809): wifi_connect_to_supplicant:ctrl_conn is NULL!!
01-01 21:55:01.810 E/WifiHW (2809): wifi_connect_to_supplicant:ctrl_conn is NULL!!
01-01 21:55:01.910 E/WifiHW (2809): wifi_connect_to_supplicant:ctrl_conn is NULL!!
01-01 21:55:02.010 E/WifiHW (2809): wifi_connect_to_supplicant:ctrl_conn is NULL!!
01-01 21:55:02.110 E/WifiHW (2809): wifi_connect_to_supplicant:ctrl_conn is NULL!!
01-01 21:55:02.215 E/WifiHW (2809): wifi_connect_to_supplicant:ctrl_conn is NULL!!
01-01 21:55:02.315 E/WifiHW (2809): wifi_connect_to_supplicant:ctrl_conn is NULL!!
01-01 21:55:02.415 E/WifiHW (2809): wifi_connect_to_supplicant:ctrl_conn is NULL!!
01-01 21:55:02.515 E/WifiHW (2809): wifi_connect_to_supplicant:ctrl_conn is NULL!!
01-01 21:55:02.615 E/WifiHW (2809): wifi_connect_to_supplicant:ctrl_conn is NULL!!
01-01 21:55:02.715 E/WifiHW (2809): wifi_connect_to_supplicant:ctrl_conn is NULL!!
01-01 21:55:02.815 E/WifiHW (2809): wifi_connect_to_supplicant:ctrl_conn is NULL!!
01-01 21:55:02.920 E/WifiHW (2809): wifi_connect_to_supplicant:ctrl_conn is NULL!!
01-01 21:55:03.020 E/WifiHW (2809): wifi_connect_to_supplicant:ctrl_conn is NULL!!
01-01 21:55:03.120 E/WifiHW (2809): wifi_connect_to_supplicant:ctrl_conn is NULL!!
01-01 21:55:03.220 E/WifiHW (2809): wifi_connect_to_supplicant:ctrl_conn is NULL!!
01-01 21:55:03.320 E/WifiHW (2809): wifi_connect_to_supplicant:ctrl_conn is NULL!!
01-01 21:55:03.420 E/WifiHW (2809): wifi_connect_to_supplicant:ctrl_conn is NULL!!
01-01 21:55:03.520 E/WifiHW (2809): wifi_connect_to_supplicant:ctrl_conn is NULL!!
01-01 21:55:03.620 E/WifiHW (2809): wifi_connect_to_supplicant:ctrl_conn is NULL!!
01-01 21:55:03.720 E/WifiHW (2809): wifi_connect_to_supplicant:ctrl_conn is NULL!!
01-01 21:55:03.820 E/WifiHW (2809): wifi_connect_to_supplicant:ctrl_conn is NULL!!
01-01 21:55:03.920 E/WifiHW (2809): wifi_connect_to_supplicant:ctrl_conn is NULL!!
01-01 21:55:04.025 E/WifiHW (2809): wifi_connect_to_supplicant: Unable to open connection to supplicant on "/data/misc/wifi/eth0": No such file or directory
01-01 21:55:09.025 E/WifiHW (2809): wifi_connect_to_supplicant: Supplicant is not running, cannot connect
01-01 21:55:14.025 E/WifiHW (2809): wifi_connect_to_supplicant: Supplicant is not running, cannot connect
01-01 21:55:19.025 E/WifiHW (2809): wifi_connect_to_supplicant: Supplicant is not running, cannot connect
01-01 21:55:19.160 E/WifiDirectController(2583): Release DirectController. --- Wifi Direct is not initialized. Don't need to release wifi direct.
01-01 21:55:19.165 E/[FT]-Server(5915): NetworkStateReceiver :intent: android.net.wifi.supplicant.CONNECTION_CHANGE
01-01 21:55:19.165 E/[FT]-Server(5915): NetworkStateReceiver :No work intent: android.net.wifi.supplicant.CONNECTION_CHANGEstate: DISCONNECTED
01-01 21:55:19.170 E/WifiSettingButton(2936): onReceive()-S:0
01-01 21:55:19.860 E/WifiSettingButton(2936): onReceive()-S:1
noone?? Plz
Ok, Phone sent to Warranty service.. Thanks anyway.
i have the same issue here... anyone knows how to fix it?
Mainboard error - Warranty refused - coz i have reinstalled ROM. This is my last Samsung ever.
ChewyLV said:
Mainboard error - Warranty refused - coz i have reinstalled ROM. This is my last Samsung ever.
Click to expand...
Click to collapse
Warranty and why its voided and the workarounds to avoid are plastered all over the forum .
jje
Take my words back.. Samsung service rocks..
try to flash a new baseband version of firmware and check it again.
xinchi said:
try to flash a new baseband version of firmware and check it again.
Click to expand...
Click to collapse
How does this fix wifi?
Wifi not work!
Hi all! I am a brazilian, sorry for my poor english. I have a GT-I9100 and used the 4.0.3 ICS ZTO official (LP7 kernel, LPF modem and LP4 CSC) until last week. The wifi started having problems (icon in the notification bar grayed out), not allowing the activation of wifi, even by settings menu. There are several similar cases on the Internet, including citing defective hardware (internal battery next to the wifi chip), which is not my case (i already checked internally). Always used CF-ROOT kernels compatible to root the phone. So as the wifi stopped working, i decided to test the Omega ROM V20 (JB 4.1.2). The phone is working better than my old version of Android, except that wifi still does not work. Because of this, i decided to install the version that came from the factory on my phone (2.3.3 GB ZTO, KE4 kernel, KE2 modem and CSC). And to my surprise, the wifi was fully functional!!! So i went back to Omega ROM V20 and wifi no longer worked anymore. In all exchanges rom, all wipes are made. Then i installed Catlog to see if i could find some clue about this defect, and the log related to wifi was this:
02-19 22:16:06.065 E/WifiHW (2421): ==========[WIFI] Station firmware load ===========
02-19 22:16:06.130 E/WifiHW (2421): ##################### set firmware type 0 #####################
02-19 22:16:07.260 E/WifiHW (2421): return of insmod : ret = -1, No such device
02-19 22:16:07.260 E/WifiStateMachine(2421): Failed to load driver!
02-19 22:16:07.270 E/WifiStateMachine(2421): DriverFailedState
02-19 22:16:07.280 E/WifiHW (2421): Cannot open "/data/.cid.info": No such file or directory
02-19 22:16:07.280 E/WifiHW (2421): ==========[WIFI] Station firmware load ===========
02-19 22:16:08.445 E/WifiHW (2421): return of insmod : ret = -1, No such device
02-19 22:16:08.445 E/WifiStateMachine(2421): Failed to load driver!
02-19 22:16:08.475 E/WifiStateMachine(2421): DriverFailedState
These lines are always repeating itself in the log since the wifi button on the notification bar is greyed out. Apparently it's a problem with the wifi drivers. In my phone the 2.3.3 is only that the wifi works, however, is pretty old now and do not offer the features that a JB version can offer. I ask the masters of this wonderful forum: is there any way to import the wifi drivers from my original version 2.3.3 to 4.1.2 Omega ROM i'm using now?
Best regards from Brazil to everyone!
Flash LSJ and tell us how it went.
Sent from the little guy
Conclusion: my wifi chip is DEAD!
Hello and thank you for the tip. But unfortunately i came to the conclusion that i have a hardware problem. First, i installed the leaked version (with no mods) for United Kingdom 4.1.2 (LSJ kernel, LS1 CSC and LS6 modem). With this version, the wifi is not greyed out, however not active (immediately the slide button back to position "0"). So i went back to version 2.3.3 where the wifi worked perfectly. Now the wifi activate, but not find any network and in a few seconds, turns off automatically. We made all wipes in exchange ROM. My GT-I9100 has a little more than 2 years old an now my wifi chip is DEAD! At least the bluetooth still works! The deal is now expected to launch the Galaxy S4 to spend some money, because S3 is outdated. In Brazil, not worth sending fix this phone, even out of warranty (it can cost up to half the price of a new). I am very grateful for your interest in helping me!
Thank you very much!!!
You still got one bullet left, nuke script.
Sent from the little guy
Ok, i'll try, but without much hope ...
Thanks once again!
See it this way, you got nothing to lose and wifi to win
Sent from the little guy
Related
I'm compiling a kernel for the I9100G. I've downloaded the latest source from Samsung and added some drivers that were missing from the package. After a few tries, I managed to get my phone to boot. Everything seems to be working except for Wifi.
The symptom: Every time I turn on the Wifi it seems to scan for a few seconds, but then turns itself off. Here's a snippet of the logcat covering the time I try to turn on the wifi:
Code:
D/WifiService( 1679): setWifiEnabled: true
D/WifiService( 1679): ****************setWifiEnabled(), allowWifi****************true
E/WifiSettingButton( 1791): onReceive()-S:2
I/WifiHW ( 1679): [WIFI] Load Driver
E/WifiHW ( 1679): module is samsung
I/WifiHW ( 1679): [WiFi.c] insmod() Start!!
I/WifiHW ( 1679): [WiFi.c] start init_module() Start!!
V/WifiSettings( 3177): resetRetryDialogVariable
I/ActivityManager( 1679): Start proc com.schwimmer.android.wifistatus for broadcast com.schwimmer.android.wifistatus/.WifiStatusReceiver: pid=3569 uid=10452 gids={1015}
I/StatusBarManagerService( 1679): ADD-null , 0x7f020000
D/Beautiful Widgets( 1835): WIFI_STATE_CHANGED_ACTION
I/WindowOrientationListener( 1679): orientation = 5.365884 Tilt = 53.00611 -- 0 , 5 , 7
W/DiskCache( 3540): rename to = /mnt/sdcard/Android/data/com.cooliris.media/cache/local-meta-cache/index
I/CacheService( 3540): Preparing DiskCache for all thumbnails.
D/dalvikvm( 3442): GC_CONCURRENT freed 339K, 46% free 3414K/6215K, external 0K/512K, paused 2ms+2ms
W/DiskCacheSEC( 3540): enter writeIndex 106
W/DiskCacheSEC( 3540): Create TempFile = /sdcard/DiskCacheIndex-1409040773.tmp
V/DiskCacheSEC( 3540): [SE Lab.] writeindex(): id= -1119846364 / mntTime= 1317589132716
V/DiskCacheSEC( 3540): [SE Lab.] writeindex(): id= 2052120067 / mntTime= 1319028831430
V/DiskCacheSEC( 3540): [SE Lab.] writeindex(): id= 1149784819 / mntTime= 1319824382708
V/DiskCacheSEC( 3540): [SE Lab.] writeindex(): id= 338429904 / mntTime= 1319824382707
D/DiskCacheSEC( 3540): Wrote index with 106 records.
W/DiskCacheSEC( 3540): rename to = /mnt/sdcard/Android/data/com.cooliris.media/cache/local-image-thumbs/index
I/TIMECHECK( 3540): END thumbnails.
I/ActivityManager( 1679): No longer want com.mediawoz.goweather (pid 3301): hidden #26
D/Tethering( 1679): eth0 is not a tetherable iface, ignoring
I/WifiHW ( 1679): [WIFI] DRIVER OK
I/WifiHW ( 1679): wifi_start_supplicant: Enter
D/WifiHW ( 1679): /data/wifi/bcm_supp.conf exits
I/WifiHW ( 1679): wifi_start_supplicant: Exit. supp_status=running
W/WifiService( 1679): ---- Check wifi direct setting. It is unchecked.
I/WifiHW ( 1679): wifi_connect_to_supplicant: enter
I/WifiHW ( 1679): wifi_connect_to_supplicant: supp_conn_status(transit)
E/WifiHW ( 1679): Unable to access IFACE_DIR /No such file or directory
E/WifiHW ( 1679): wifi_connect_to_supplicant: ifname(eth0)
I/wpa_supplicant( 3592): Interface eth0 set UP - success
V/SettingsProvider( 1679): secure <- value=1 name=wifi_on
V/SettingsProvider( 1679): property: sys.settings_secure_version=1
V/SettingsProvider( 1679): notifying: content://settings/secure/wifi_on
E/WifiSettingButton( 1791): onReceive()-S:3
E/AlarmManagerService( 1679): android_server_AlarmManagerService_set to type=2, 121.781000000
E/wpa_supplicant( 3592): Failed to initialize control interface 'eth0'.
E/wpa_supplicant( 3592): You may have another wpa_supplicant process already running or the file was
E/wpa_supplicant( 3592): left by an unclean termination of wpa_supplicant in which case you will need
E/wpa_supplicant( 3592): to manually remove this file before starting wpa_supplicant again.
I/wpa_supplicant( 3592): CTRL-EVENT-STATE-CHANGE id=-1 state=0 BSSID=00:00:00:00:00:00
E/WifiHW ( 1679): wifi_connect_to_supplicant:ctrl_conn is NULL!!
I/WindowOrientationListener( 1679): orientation = 4.798251 Tilt = 53.126266 -- 0 , 5 , 8
E/WifiHW ( 1679): wifi_connect_to_supplicant:ctrl_conn is NULL!!
E/WifiHW ( 1679): wifi_connect_to_supplicant:ctrl_conn is NULL!!
E/WifiHW ( 1679): wifi_connect_to_supplicant:ctrl_conn is NULL!!
E/WifiHW ( 1679): wifi_connect_to_supplicant:ctrl_conn is NULL!!
E/WifiHW ( 1679): wifi_connect_to_supplicant:ctrl_conn is NULL!!
E/WifiHW ( 1679): wifi_connect_to_supplicant:ctrl_conn is NULL!!
E/WifiHW ( 1679): wifi_connect_to_supplicant:ctrl_conn is NULL!!
E/WifiHW ( 1679): wifi_connect_to_supplicant:ctrl_conn is NULL!!
E/WifiHW ( 1679): wifi_connect_to_supplicant:ctrl_conn is NULL!!
E/WifiHW ( 1679): wifi_connect_to_supplicant:ctrl_conn is NULL!!
I/WindowOrientationListener( 1679): orientation = 4.523258 Tilt = 53.586506 -- 0 , 5 , 8
E/WifiHW ( 1679): wifi_connect_to_supplicant:ctrl_conn is NULL!!
E/WifiHW ( 1679): wifi_connect_to_supplicant:ctrl_conn is NULL!!
E/WifiHW ( 1679): wifi_connect_to_supplicant:ctrl_conn is NULL!!
E/WifiHW ( 1679): wifi_connect_to_supplicant:ctrl_conn is NULL!!
E/WifiHW ( 1679): wifi_connect_to_supplicant:ctrl_conn is NULL!!
E/WifiHW ( 1679): wifi_connect_to_supplicant:ctrl_conn is NULL!!
E/WifiHW ( 1679): wifi_connect_to_supplicant:ctrl_conn is NULL!!
I/StatusBarPolicy( 1791): onDataActivity-D:0
E/WifiHW ( 1679): wifi_connect_to_supplicant:ctrl_conn is NULL!!
E/WifiHW ( 1679): wifi_connect_to_supplicant:ctrl_conn is NULL!!
D/dalvikvm( 2999): GC_CONCURRENT freed 219K, 46% free 3166K/5831K, external 0K/0K, paused 2ms+3ms
E/WifiHW ( 1679): wifi_connect_to_supplicant:ctrl_conn is NULL!!
E/WifiHW ( 1679): wifi_connect_to_supplicant:ctrl_conn is NULL!!
E/WifiHW ( 1679): wifi_connect_to_supplicant:ctrl_conn is NULL!!
E/WifiHW ( 1679): wifi_connect_to_supplicant:ctrl_conn is NULL!!
E/WifiHW ( 1679): wifi_connect_to_supplicant:ctrl_conn is NULL!!
E/WifiHW ( 1679): wifi_connect_to_supplicant:ctrl_conn is NULL!!
E/WifiHW ( 1679): wifi_connect_to_supplicant:ctrl_conn is NULL!!
E/WifiHW ( 1679): wifi_connect_to_supplicant:ctrl_conn is NULL!!
E/WifiHW ( 1679): wifi_connect_to_supplicant:ctrl_conn is NULL!!
E/WifiHW ( 1679): wifi_connect_to_supplicant:ctrl_conn is NULL!!
E/WifiHW ( 1679): wifi_connect_to_supplicant: Unable to open connection to supplicant on "eth0": No such file or directory
D/WifiSettings( 3177): updateAccessPoints(), WifiConfigureation list updated
D/WifiSettings( 3177): updateAccessPoints(), ScanResult list updated
V/WifiSettings( 3177): resetRetryDialogVariable
Here's a snippet of the dmesg log:
Code:
4>[ 122.551971] wlan_setup_power: on
<7>[ 122.552001] wlan_setup_power: wlan enable GPIO value(104)=1
<4>[ 122.552032] omap_hsmmc_force_presence_change_for_wlan: enter
<7>[ 122.552093] omap_hsmmc_force_presence_change_for_wlan: mmc detect change called, omap_hsmmc_host_pub=ee207e40
<4>[ 122.554626]
<4>[ 122.554626] Dongle Host Driver, version 5.90.100.133 (WFD)
<4>[ 122.554656] Compiled in drivers/net/wireless/bcm4330/src on Oct 29 2011 at 13:35:55
<3>[ 122.591705] cpu_up CPU1: Booted secondary processor
<6>[ 122.756225] omap4_duty_enter_heating enter at ()
<4>[ 123.091857] [MMC] IRQ Status is 18000
<4>[ 123.097167] [MMC] IRQ Status is 18000
<4>[ 123.106048] [MMC] IRQ Status is 18000
<4>[ 123.121765] mmc2: queuing unknown CIS tuple 0x80 (7 bytes)
<4>[ 123.166748] mmc2: queuing unknown CIS tuple 0x80 (3 bytes)
<6>[ 123.179382] mmc2: new high speed SDIO card at address 0001
<4>[ 123.183563] dhd_customer_oob_irq_map: customer specific Host GPIO number is (81), flag=0x2
<4>[ 123.184020] F1 signature read @0x18000000=0x16834330
<4>[ 123.188293] DHD: dongle ram size is set to 294912(orig 294912)
<4>[ 123.188415] CHIP VER = [3]
<4>[ 123.221405] dhdsdio_download_nvram: firmware image path = /system/etc/wifi/bcm4330_sta.bin
<4>[ 123.221466] dhdsdio_download_nvram: nvram vars file path = /system/etc/wifi/nvram_net.txt
<4>[ 123.222259] dhdsdio_write_vars: Download, Upload and compare of NVRAM succeeded.
<4>[ 123.412200] MAC (OTP) : [78:D6:F0:A5:45:00]
<4>[ 123.412231] MAC (FILE): [78:D6:F0:A5:45:00] [1]
<4>[ 123.412933] Firmware version = wl0: Aug 19 2011 10:29:30 version 5.90.100.270 (BTAMP WFD)
<4>[ 123.412963]
<4>[ 123.415222] POWER_VAL = 1
<4>[ 123.482330] ABB: TRANXDONE timed out waiting for OPP change
<4>[ 123.496215] dhd_preinit_ioctls: KEEP Alive time is 45s
<4>[ 123.498992] eth0: Broadcom Dongle Host Driver MAC=78:D6:F0:A5:45:00
<4>[ 123.499053] Enter wl_control_wl_start
<4>[ 123.499084] Exited wl_control_wl_start
<4>[ 123.501770] wl_iw_iscan_set_scan_broadcast_prep: First Brodcast scan was forced
<4>[ 123.503845] +++: Set Broadcast ISCAN
<4>[ 123.581146] eth0: SIOCSIWMODE MODE 2
<4>[ 123.581176] eth0: SIOCSIWMODE MODE 2 SSS
<4>[ 123.581512] eth0: SIOCSIWCOMMIT
<4>[ 123.581878] eth0: SIOCGIWRANGE
<4>[ 123.584228] eth0: SIOCGIWMODE
<4>[ 123.584808] eth0: SIOCSIWAP
<4>[ 123.591796] ABB: TRANXDONE timed out waiting for OPP change
<4>[ 123.607147] eth0: SIOCSIWAUTH, IW_AUTH_WPA_ENABLED(7), paramval = 0x1
<4>[ 123.607177] eth0: SIOCSIWENCODEEXT
<4>[ 123.607635] eth0: SIOCSIWENCODEEXT
<4>[ 123.608001] eth0: SIOCSIWENCODEEXT
<4>[ 123.608337] eth0: SIOCSIWENCODEEXT
<4>[ 123.608703] eth0: SIOCSIWAUTH, IW_AUTH_TKIP_COUNTERMEASURES(4), paramval = 0x0
<4>[ 123.609222] eth0: SIOCSIWAUTH, IW_AUTH_DROP_UNENCRYPTED(5), paramval = 0x1
<4>[ 123.618835] eth0: SIOCSIWAUTH, IW_AUTH_WPA_ENABLED(7), paramval = 0x0
<4>[ 123.619659] eth0: SIOCSIWAUTH, IW_AUTH_DROP_UNENCRYPTED(5), paramval = 0x0
<4>[ 123.620025] eth0: SIOCSIWAUTH, IW_AUTH_TKIP_COUNTERMEASURES(4), paramval = 0x0
<4>[ 123.647033] eth0: SIOCGIWMODE
<4>[ 123.647613] eth0: SIOCSIWAP
<4>[ 124.594421] Enter wl_control_wl_start
<4>[ 124.594482] Exited wl_control_wl_start
<4>[ 124.598785] Send Event ISCAN complete
From what I can gather, it seems the wifi driver managed to load itself up, however, it failed to connect to the supplicant service and then was turned off. Can someone please tell me what is happening and how I can fix it? Thanks in advance.
Never mind, I solved the problem. Turned out my init.rc was missing a couple of lines.
Any chance of getting a copy of your kernel?
Was wondering if you could jack up the charge rate in the kernel to around 2A. As I understand the charge rate for GS2s are limited by the kernel to 660ma regardless of the type of AC charger used. It's even worse when you plug it into a computer USB port. By jacking up to 2A we can take advantage of the faster chargers available on the market. For example the iPad charger puts out 5.1v, 2.1Amps. This would greatly reduce the time needed to charge the battery.
Hi all, want to congratulate you on this forum, I hope you can help me.
Recently bought this "SGP 5.0 YP-70" from Amazon and am very pleased, but after two weeks of use, suddenly stopped working the WiFi and BT, I have dealt with several networks and definitely nothing. Update to 2.3.6, then downgrade to 2.2.2, rooting, unrooting, I'm thinking it's a hardware problem, someone has had a similar fault? I can not return it for warranty because the shipping (Venezuela) would cost more than a new one. I would appreciate any suggestions.
:crying:
try flush Dalvik cache and cache partition
if dont help, get logcat, try to turn on wifi and bt and show us those logs
Arlicc said:
try flush Dalvik cache and cache partition
if dont help, get logcat, try to turn on wifi and bt and show us those logs
Click to expand...
Click to collapse
Do not work.
Apreciate your help
The logcat:
# logcat *:E
E/WifiSettingButton( 239): activate()
E/WifiHW ( 121): DRV_AP_MODULE_ARG.
E/WifiHW ( 121): WIFI_CONF_PATH. /system/etc/wifi/wifi.conf
E/WifiHW ( 121): DRIVER_MODULE_PATH. /lib/modules/dhd.ko
E/WifiHW ( 121): insmod load_file "/lib/modules/dhd.ko"
E/WifiSettingButton( 239): onReceive()-S:2
E/WifiHW ( 121): wifi_start_supplicant: pi->serial=117440522, serial=0
E/WifiHW ( 121): wifi_connect_to_supplicant:IFACE_DIR(/data/misc/wifi), iface(eth0), ifname(/data/misc/wifi/eth0)
E/WifiHW ( 121): wifi_connect_to_supplicant: ifname(/data/misc/wifi/eth0)
E/WifiHW ( 121): wifi_connect_to_supplicant:ctrl_conn is NULL!!
E/wpa_supplicant( 2865): Line 1: unknown global field ''.
E/wpa_supplicant( 2865): Line 1: Invalid configuration line ''.
E/wpa_supplicant( 2865): Line 325: unknown global field 'proactive_key_caching=1'.
E/wpa_supplicant( 2865): Line 325: Invalid configuration line 'proactive_key_caching=1'.
E/WifiSettingButton( 239): onReceive()-S:3
E/wpa_supplicant( 2865): ioctl[SIOCGIFFLAGS]
E/wpa_supplicant( 2865): ioctl[SIOCSIWPMKSA]
E/wpa_supplicant( 2865): ioctl[SIOCSIWMODE]
E/wpa_supplicant( 2865): ioctl[SIOCGIRANGE]
E/wpa_supplicant( 2865): ioctl[SIOCGIWMODE]
E/wpa_supplicant( 2865): ioctl[SIOCSIWAP]
E/wpa_supplicant( 2865): ioctl[SIOCSIWENCODEEXT]
E/wpa_supplicant( 2865): ioctl[SIOCSIWENCODE]
E/wpa_supplicant( 2865): ioctl[SIOCSIWENCODEEXT]
E/wpa_supplicant( 2865): ioctl[SIOCSIWENCODE]
E/wpa_supplicant( 2865): ioctl[SIOCSIWENCODEEXT]
E/wpa_supplicant( 2865): ioctl[SIOCSIWENCODE]
E/wpa_supplicant( 2865): ioctl[SIOCSIWENCODEEXT]
E/wpa_supplicant( 2865): ioctl[SIOCSIWENCODE]
E/wpa_supplicant( 2865): Failed to disable WPA in the driver.
E/wpa_supplicant( 2865): ioctl[SIOCGIWMODE]
E/wpa_supplicant( 2865): ioctl[SIOCSIWAP]
E/wpa_supplicant( 2865): ioctl[SIOCGIFFLAGS]
E/WifiHW ( 121): wifi_connect_to_supplicant:ctrl_conn is NULL!!
E/WifiHW ( 121): wifi_connect_to_supplicant:ctrl_conn is NULL!!
E/WifiHW ( 121): wifi_connect_to_supplicant:ctrl_conn is NULL!!
E/WifiHW ( 121): wifi_connect_to_supplicant:ctrl_conn is NULL!!
E/WifiHW ( 121): wifi_connect_to_supplicant:ctrl_conn is NULL!!
E/WifiHW ( 121): wifi_connect_to_supplicant:ctrl_conn is NULL!!
E/WifiHW ( 121): wifi_connect_to_supplicant:ctrl_conn is NULL!!
E/WifiHW ( 121): wifi_connect_to_supplicant:ctrl_conn is NULL!!
E/WifiHW ( 121): wifi_connect_to_supplicant:ctrl_conn is NULL!!
E/WifiHW ( 121): wifi_connect_to_supplicant: Unable to open connection to supplicant on "/data/misc/wifi/eth0": No such file or directory
E/WifiHW ( 121): wifi_connect_to_supplicant: Supplicant is not running, cannot connect
E/WifiHW ( 121): wifi_connect_to_supplicant: Supplicant is not running, cannot connect
E/WifiHW ( 121): wifi_connect_to_supplicant: Supplicant is not running, cannot connect
E/WifiSettingButton( 239): onReceive()-S:0
E/WifiHW ( 121): [WIFI] Unload Driver
E/WifiSettingButton( 239): onReceive()-S:1
E/AxT9IME ( 246): WordSymbInit: 1
E/BluetoothSettingButton( 239): activate()
E/BluetoothSettingButton( 239): onReceive()-S:11
E/BTL-SERVER( 4031): BTLD starting...
E/BTL_CFG ( 4031): WARNING : [service.brcm.bt.patchfile] property_get failed (0)
E/BTL_CFG ( 4031): WARNING : [service.brcm.bt.bt_wake_polar] property_get failed (0)
E/BTL_CFG ( 4031): WARNING : [service.brcm.bt.host_wake_polar] property_get failed (0)
E/BTL_CFG ( 4031): WARNING : [service.brcm.bt.pcm_clk] property_get failed (0)
E/BTL_CFG ( 4031): WARNING : [service.brcm.bt.pcm_ms_role] property_get failed (0)
E/BTL_CFG ( 4031): WARNING : [service.brcm.bt.TRC_BTAPP] property_get failed (0)
E/ ( 4031): BTM: btm_read_local_name_complete: local name is [BCM4329B1]
E/ ( 4031): [hcis] Unknown HCI message type drop this byte 0x34
E/ ( 4031): [hcis] Unknown HCI message type drop this byte 0x31
E/BTAPP_CONF( 4031): Cannot open file /etc/bluetooth/did.conf
E/BTAPP_CONF( 4031): Cannot open file /etc/bluetooth/did.conf
E/BTAPP_CONF( 4031): Cannot open file /etc/bluetooth/did.conf
E/ ( 4045): this is not dir. type: 4, name: .
E/ ( 4045): this is not dir. type: 4, name: ..
E/ ( 4045): this is not reg. type: 4, name: F80:BD:70:52:76
E/ ( 4045): this is not reg. type: 4, name: F80:BD:70:52:76
E/ADAPTER ( 4045): hci_open_dev(hci0): No such device (19)
E/BluetoothEventLoop.cpp( 121): event_filter: Received signal org.bluez.AdapterropertyChanged from /org/bluez/590/hci0
E/BluetoothEventLoop.cpp( 121): event_filter: Received signal org.bluez.AdapterropertyChanged from /org/bluez/590/hci0
E/BluetoothEventLoop.cpp( 121): event_filter: Received signal org.bluez.AdapterropertyChanged from /org/bluez/590/hci0
E/BluetoothSettingButton( 239): onReceive()-S:12
E/BluetoothEventLoop.cpp( 121): event_filter: Received signal org.bluez.AdapterropertyChanged from /org/bluez/4045/hci0
E/OppEventHandler.cpp( 260): ye NewGlobalRefbject:0x40519ed0, me:0x40519ed0, gref:1
E/RequestQueueHelper( 3708): [Thread-15/15] Next pending job not found!!
E/RequestQueueHelper( 3708): [OPSWorkerThread-1343113726405/21] Next pending job not found!!
Look like messed up configuration or messed up kernel.
Try install right 2.3.5 or 2.3.6 and try to flash a right kernel.
I had got similar problem after flash cm7 kernel on stock 2.3.6
Sent from my GT-I9000 using xda app-developers app
Arlicc said:
Look like messed up configuration or messed up kernel.
Try install right 2.3.5 or 2.3.6 and try to flash a right kernel.
I had got similar problem after flash cm7 kernel on stock 2.3.6
Sent from my GT-I9000 using xda app-developers app
Click to expand...
Click to collapse
I've tried every rom found and nothing happen, now I am with "g70xxkph-rooted-rj14.tar.md5" taked from http://forum.xda-developers.com/showthread.php?t=1446774, thanks to WT Ho.
I have to said that I am not an expert in Android and nothing come to my mind, what else can be done?
davisabe said:
I've tried every rom found and nothing happen, now I am with "g70xxkph-rooted-rj14.tar.md5" taked from http://forum.xda-developers.com/showthread.php?t=1446774, thanks to WT Ho.
I have to said that I am not an expert in Android and nothing come to my mind, what else can be done?
Click to expand...
Click to collapse
Try this link
http://forum.xda-developers.com/showthread.php?t=1414565
It's the kernel direct. Backup your device before you do anything.
alljokingaside said:
Try this link
http://forum.xda-developers.com/showthread.php?t=1414565
It's the kernel direct. Backup your device before you do anything.
Click to expand...
Click to collapse
Just did a backup and installed the Kernel and still without WiFi or BT
I really think it's a hardware issue.
Taked from terminal; maybe it can help:
$ export PATH=/data/local/bin:$PATH
$ su
# busybox iplink show dev eth0
iplink: can't find device 'eth0'
#
# iplink show
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
2: ifb0: <BROADCAST,NOARP> mtu 1500 qdisc noop qlen 32
link/ether aa:c6:02:98:3a:c2 brd ff:ff:ff:ff:ff:ff
3: ifb1: <BROADCAST,NOARP> mtu 1500 qdisc noop qlen 32
link/ether e2:53:f6:ae:68:37 brd ff:ff:ff:ff:ff:ff
4: usb0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop qlen 1000
link/ether 62:73:74:4d:bd:13 brd ff:ff:ff:ff:ff:ff
5: sit0: <NOARP> mtu 1480 qdisc noop
link/sit 0.0.0.0 brd 0.0.0.0
6: ip6tnl0: <NOARP> mtu 1460 qdisc noop
link/tunnel6 00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00 brd 00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00
#
davisabe said:
Just did a backup and installed the Kernel and still without WiFi or BT
I really think it's a hardware issue.
So, nobody has a clue?
Click to expand...
Click to collapse
WiFi & BT
davisabe said:
davisabe said:
Just did a backup and installed the Kernel and still without WiFi or BT
I really think it's a hardware issue.
So, nobody has a clue?
Click to expand...
Click to collapse
Came on guys!
Click to expand...
Click to collapse
try going to CWM doing all 3wipes there, wipe data, factory reset, clear dalvik cache then reboot.
if this doesn't help, you most probably have a h/w problem
Hi Guys
So I tried to port a MIUI V5 4.4.2 ROM to my device and after rebooting after flashing it everytime, I get an unresponisve black screen but device is detected by adb so I can easily boot into recovery. Recovery.log is perfectly clear though no problems during flashing. But this logcat goes way overy my head. Can you guys please help me Don't ignore this thread as I have trying the port since a month and litreally tried all guides, videos, tut's, google etc but didn't end up on a satisfactory guide. No guide could solve the problme. Asked many porting devs still no answer. So lets begin with basic info.
I have XOLO HIVE 8x-1000 MT6592 with 2 GB Ram ( rest specs can be found here - XOLO 8x-1000 Specifications ) and the rom I am trying to port is ELephone P9 ported ROM, MIUI V5 for Elephone P9 which is really same as my device except NFC and CPU clocking as it's 1.7 Ghz and mine is 1.4 Ghz, here specs forELEPHONE P9.
So I assume you must have looked specs of both devices which prove that they are identical in most aspects and I also hope you took a proper look at the ROM I am trying to port as I provided the link. So I asked every person I could from a noob to a dev who can help me but no answer and even no guide on how to port MIUI KK V5 for MTK devices. My logcat is in first post. Please do have a look and reply to it.
EDIT : I am using Windows 7 Ultimate as OS and WinRAR to port and Notepad++ set in UNIX mode to edit all my stuff like updater-script etc and also added logcat.txt if you want to have a look later at offline mode. Please help me. :'(
Here is my logcat now : Part 1
D/libEGL ( 784): loaded /system/lib/egl/libEGL_mali.so
D/libEGL ( 784): loaded /system/lib/egl/libGLESv1_CM_mali.so
I/Netd ( 783): execIptablesCommand android_fork_execvp exit
I/Netd ( 783): execIptablesCommand android_fork_execvp enter
D/libEGL ( 784): loaded /system/lib/egl/libGLESv2_mali.so
I/Netd ( 783): execIptablesCommand android_fork_execvp exit
I/Netd ( 783): execIptablesCommand android_fork_execvp enter
W/MALI ( 784): __egl_set_error:110: [WARNING]Mali EGL errorcode: 3003
W/libEGL ( 784): eglInitialize(0x1) failed (EGL_BAD_ALLOC)
I/Netd ( 783): execIptablesCommand android_fork_execvp exit
I/Netd ( 783): execIptablesCommand android_fork_execvp enter
I/[MALI][Gralloc]( 784): dlopen libsec_mem.so fail
I/gralloc ( 784): [Gralloc] refreshRate = 0, info.pixclock = ffffffff
I/gralloc ( 784): [Gralloc] info.upper_margin = ffffffff, info.lower_margin = f
fffffff
I/gralloc ( 784): [Gralloc] info.yres = 500, info.hsync_len = ffffffff
I/gralloc ( 784): [Gralloc] info.left_margin = ffffffff, info.right_margin = ff
ffffff
I/[MALI][Gralloc]( 784): ro_dpi: 320.000000
I/[MALI][Gralloc]( 784): using (fd=19)
I/[MALI][Gralloc]( 784): id = mtkfb
I/[MALI][Gralloc]( 784): xres = 720 px
I/[MALI][Gralloc]( 784): yres = 1280 px
I/[MALI][Gralloc]( 784): xres_virtual = 720 px
I/[MALI][Gralloc]( 784): yres_virtual = 3840 px
I/[MALI][Gralloc]( 784): bpp = 32
I/[MALI][Gralloc]( 784): r = 16:8
I/[MALI][Gralloc]( 784): g = 8:8
I/[MALI][Gralloc]( 784): b = 0:8
I/[MALI][Gralloc]( 784): width = 57 mm (320.842102 dpi)
I/[MALI][Gralloc]( 784): height = 102 mm (318.745087 dpi)
I/[MALI][Gralloc]( 784): refresh rate = 60.00 Hz
I/[MALI][Gralloc]( 784): init_framebuffer va: 0xb561c000 mva: 0xfeb00000
E/M4U_L ( 784): ioctl MTK_M4U_T_M4UDrv_CONSTRUCT fail! 2, No such file or di
rectory
I/hwcomposer( 784): [DPY] Display Information:
I/hwcomposer( 784): [DPY] # fo devices : 1
I/hwcomposer( 784): [DPY] -----------------------------
I/hwcomposer( 784): [DPY] Device id : 0
I/hwcomposer( 784): [DPY] Width : 720
I/hwcomposer( 784): [DPY] Height : 1280
I/Netd ( 783): execIptablesCommand android_fork_execvp exit
I/hwcomposer( 784): [DPY] xdpi : 320.000000
I/Netd ( 783): execIptablesCommand android_fork_execvp enter
I/hwcomposer( 784): [DPY] ydpi : 320.000000
I/hwcomposer( 784): [DPY] vsync : 1
I/hwcomposer( 784): [DPY] refresh : 16507097
I/hwcomposer( 784): [DPY] connected : 1
I/hwcomposer( 784): [DPY] subtype : 0
W/hwcomposer( 784): [EVENT] HW VSync State(1)
W/hwcomposer( 784): [EVENT] Start to listen uevent, addr.nl_pid(784)
I/hwcomposer( 784): [WKR] Set priority to RR: 268435543
I/SurfaceFlinger( 784): Using composer version 1.2
I/hwcomposer( 784): [HWC] getConfigs Display(0)
I/hwcomposer( 784): [HWC] getAttributes Display(0)
I/hwcomposer( 784): [WKR] Set priority to RR: 268435543
I/hwcomposer( 784): [WKR] Set priority to RR: 268435543
I/hwcomposer( 784): [HWC] getConfigs Display(1)
I/hwcomposer( 784): [HWC] getAttributes Display(1)
E/hwcomposer( 784): [HWC] Failed to get display attributes (dpy=1 is not connec
ted)
W/MALI ( 784): __egl_set_error:110: [WARNING]Mali EGL errorcode: 3001
W/MALI ( 784): __egl_set_error:110: [WARNING]Mali EGL errorcode: 3001
W/MALI ( 784): __egl_set_error:110: [WARNING]Mali EGL errorcode: 3001
W/MALI ( 784): __egl_set_error:110: [WARNING]Mali EGL errorcode: 3001
W/SurfaceFlinger( 784): no suitable EGLConfig found, trying a simpler query
W/MALI ( 784): __egl_set_error:110: [WARNING]Mali EGL errorcode: 3001
W/MALI ( 784): __egl_set_error:110: [WARNING]Mali EGL errorcode: 3001
F/SurfaceFlinger( 784): no suitable EGLConfig found, giving up
F/libc ( 784): Fatal signal 6 (SIGABRT) at 0x00000310 (code=-6), thread 784
(surfaceflinger)
F/libc ( 784): Unable to open connection to debuggerd: Connection refused
I/Netd ( 783): execIptablesCommand android_fork_execvp exit
I/Netd ( 783): execIptablesCommand android_fork_execvp enter
I/Netd ( 783): execIptablesCommand android_fork_execvp exit
I/Netd ( 783): execIptablesCommand android_fork_execvp enter
I/Netd ( 820): Netd 1.0 starting
W/InterfaceController( 820): Warning (dlopen failed: library "/system/lib/libne
tcmdiface.so" not found) while opening the net interface command library
I/Netd ( 820): execIptablesCommand android_fork_execvp enter
I/Netd ( 820): execIptablesCommand android_fork_execvp exit
I/Netd ( 820): execIptablesCommand android_fork_execvp enter
I/Netd ( 820): execIptablesCommand android_fork_execvp exit
I/Netd ( 820): execIptablesCommand android_fork_execvp enter
I/Netd ( 820): execIptablesCommand android_fork_execvp exit
I/Netd ( 820): execIptablesCommand android_fork_execvp enter
I/Netd ( 820): execIptablesCommand android_fork_execvp exit
I/Netd ( 820): execIptablesCommand android_fork_execvp enter
I/SurfaceFlinger( 821): [int main(int, char**)] set surfaceflinger is in root u
ser, adjust caps for its thread
I/SurfaceFlinger( 821): SurfaceFlinger is starting
I/SurfaceFlinger( 821): SurfaceFlinger's main thread ready to run. Initializing
graphics H/W...
D/libEGL ( 821): loaded /system/lib/egl/libEGL_mali.so
D/libEGL ( 821): loaded /system/lib/egl/libGLESv1_CM_mali.so
D/libEGL ( 821): loaded /system/lib/egl/libGLESv2_mali.so
I/Netd ( 820): execIptablesCommand android_fork_execvp exit
I/Netd ( 820): execIptablesCommand android_fork_execvp enter
W/MALI ( 821): __egl_set_error:110: [WARNING]Mali EGL errorcode: 3003
W/libEGL ( 821): eglInitialize(0x1) failed (EGL_BAD_ALLOC)
I/[MALI][Gralloc]( 821): dlopen libsec_mem.so fail
I/gralloc ( 821): [Gralloc] refreshRate = 0, info.pixclock = ffffffff
I/gralloc ( 821): [Gralloc] info.upper_margin = ffffffff, info.lower_margin = f
fffffff
I/gralloc ( 821): [Gralloc] info.yres = 500, info.hsync_len = ffffffff
I/gralloc ( 821): [Gralloc] info.left_margin = ffffffff, info.right_margin = ff
ffffff
I/[MALI][Gralloc]( 821): ro_dpi: 320.000000
I/[MALI][Gralloc]( 821): using (fd=19)
I/[MALI][Gralloc]( 821): id = mtkfb
I/[MALI][Gralloc]( 821): xres = 720 px
I/[MALI][Gralloc]( 821): yres = 1280 px
I/[MALI][Gralloc]( 821): xres_virtual = 720 px
I/[MALI][Gralloc]( 821): yres_virtual = 3840 px
I/[MALI][Gralloc]( 821): bpp = 32
I/[MALI][Gralloc]( 821): r = 16:8
I/[MALI][Gralloc]( 821): g = 8:8
I/[MALI][Gralloc]( 821): b = 0:8
I/[MALI][Gralloc]( 821): width = 57 mm (320.842102 dpi)
I/[MALI][Gralloc]( 821): height = 102 mm (318.745087 dpi)
I/[MALI][Gralloc]( 821): refresh rate = 60.00 Hz
I/[MALI][Gralloc]( 821): init_framebuffer va: 0xb5565000 mva: 0xfeb00000
E/M4U_L ( 821): ioctl MTK_M4U_T_M4UDrv_CONSTRUCT fail! 2, No such file or di
rectory
I/hwcomposer( 821): [DPY] Display Information:
I/hwcomposer( 821): [DPY] # fo devices : 1
I/hwcomposer( 821): [DPY] -----------------------------
I/hwcomposer( 821): [DPY] Device id : 0
I/hwcomposer( 821): [DPY] Width : 720
I/hwcomposer( 821): [DPY] Height : 1280
I/hwcomposer( 821): [DPY] xdpi : 320.000000
I/hwcomposer( 821): [DPY] ydpi : 320.000000
I/hwcomposer( 821): [DPY] vsync : 1
I/Netd ( 820): execIptablesCommand android_fork_execvp exit
I/Netd ( 820): execIptablesCommand android_fork_execvp enter
I/hwcomposer( 821): [DPY] refresh : 16507097
I/hwcomposer( 821): [DPY] connected : 1
I/hwcomposer( 821): [DPY] subtype : 0
W/hwcomposer( 821): [EVENT] HW VSync State(1)
W/hwcomposer( 821): [EVENT] Start to listen uevent, addr.nl_pid(821)
I/hwcomposer( 821): [WKR] Set priority to RR: 268435543
I/hwcomposer( 821): [WKR] Set priority to RR: 268435543
I/hwcomposer( 821): [WKR] Set priority to RR: 268435543
I/hwcomposer( 821): [WKR] Set priority to RR: 268435543
I/hwcomposer( 821): [WKR] Set priority to RR: 268435543
I/SurfaceFlinger( 821): Using composer version 1.2
I/hwcomposer( 821): [HWC] getConfigs Display(0)
I/hwcomposer( 821): [HWC] getAttributes Display(0)
I/hwcomposer( 821): [HWC] getConfigs Display(1)
I/hwcomposer( 821): [HWC] getAttributes Display(1)
E/hwcomposer( 821): [HWC] Failed to get display attributes (dpy=1 is not connec
ted)
W/MALI ( 821): __egl_set_error:110: [WARNING]Mali EGL errorcode: 3001
W/MALI ( 821): __egl_set_error:110: [WARNING]Mali EGL errorcode: 3001
W/MALI ( 821): __egl_set_error:110: [WARNING]Mali EGL errorcode: 3001
W/MALI ( 821): __egl_set_error:110: [WARNING]Mali EGL errorcode: 3001
W/SurfaceFlinger( 821): no suitable EGLConfig found, trying a simpler query
W/MALI ( 821): __egl_set_error:110: [WARNING]Mali EGL errorcode: 3001
W/MALI ( 821): __egl_set_error:110: [WARNING]Mali EGL errorcode: 3001
F/SurfaceFlinger( 821): no suitable EGLConfig found, giving up
F/libc ( 821): Fatal signal 6 (SIGABRT) at 0x00000335 (code=-6), thread 821
(surfaceflinger)
F/libc ( 821): Unable to open connection to debuggerd: Connection refused
I/Netd ( 820): execIptablesCommand android_fork_execvp exit
I/Netd ( 820): execIptablesCommand android_fork_execvp enter
I/Netd ( 820): execIptablesCommand android_fork_execvp exit
I/Netd ( 820): execIptablesCommand android_fork_execvp enter
I/Netd ( 820): execIptablesCommand android_fork_execvp exit
I/Netd ( 820): execIptablesCommand android_fork_execvp enter
I/Netd ( 820): execIptablesCommand android_fork_execvp exit
I/Netd ( 820): execIptablesCommand android_fork_execvp enter
I/sn ( 191): Retry 5
I/sn ( 191): Fail to access err=No such file or directory
I/sn ( 191): Fail to access err=No such file or directory
I/sn ( 191): Fail to access err=No such file or directory
I/sn ( 191): Check all possible paths
I/Netd ( 858): Netd 1.0 starting
W/InterfaceController( 858): Warning (dlopen failed: library "/system/lib/libne
tcmdiface.so" not found) while opening the net interface command library
I/Netd ( 858): execIptablesCommand android_fork_execvp enter
D/ADB_SERVICES( 198): adb fdevent_process list (12) (18)
D/ADB_SERVICES( 198): adb socket read list (18)
D/ADB_SERVICES( 198): read_data=11945
D/ADB_SERVICES( 198): max_read_time=0.000080 max_send_time=0.000063
D/ADB_SERVICES( 198): adb local_socket_ready list (18)
I/Netd ( 858): execIptablesCommand android_fork_execvp exit
I/Netd ( 858): execIptablesCommand android_fork_execvp enter
I/Netd ( 858): execIptablesCommand android_fork_execvp exit
I/Netd ( 858): execIptablesCommand android_fork_execvp enter
I/Netd ( 858): execIptablesCommand android_fork_execvp exit
I/Netd ( 858): execIptablesCommand android_fork_execvp enter
I/Netd ( 858): execIptablesCommand android_fork_execvp exit
I/Netd ( 858): execIptablesCommand android_fork_execvp enter
I/Netd ( 858): execIptablesCommand android_fork_execvp exit
I/Netd ( 858): execIptablesCommand android_fork_execvp enter
I/Netd ( 858): execIptablesCommand android_fork_execvp exit
I/Netd ( 858): execIptablesCommand android_fork_execvp enter
I/Netd ( 858): execIptablesCommand android_fork_execvp exit
I/Netd ( 858): execIptablesCommand android_fork_execvp enter
I/Netd ( 858): execIptablesCommand android_fork_execvp exit
I/Netd ( 858): execIptablesCommand android_fork_execvp enter
I/SurfaceFlinger( 859): [int main(int, char**)] set surfaceflinger is in root u
ser, adjust caps for its thread
I/SurfaceFlinger( 859): SurfaceFlinger is starting
I/SurfaceFlinger( 859): SurfaceFlinger's main thread ready to run. Initializing
graphics H/W...
D/libEGL ( 859): loaded /system/lib/egl/libEGL_mali.so
D/libEGL ( 859): loaded /system/lib/egl/libGLESv1_CM_mali.so
I/Netd ( 858): execIptablesCommand android_fork_execvp exit
I/Netd ( 858): execIptablesCommand android_fork_execvp enter
I/Netd ( 858): execIptablesCommand android_fork_execvp exit
I/Netd ( 858): execIptablesCommand android_fork_execvp enter
D/libEGL ( 859): loaded /system/lib/egl/libGLESv2_mali.so
I/Netd ( 858): execIptablesCommand android_fork_execvp exit
I/Netd ( 858): execIptablesCommand android_fork_execvp enter
W/MALI ( 859): __egl_set_error:110: [WARNING]Mali EGL errorcode: 3003
W/libEGL ( 859): eglInitialize(0x1) failed (EGL_BAD_ALLOC)
I/[MALI][Gralloc]( 859): dlopen libsec_mem.so fail
I/gralloc ( 859): [Gralloc] refreshRate = 0, info.pixclock = ffffffff
I/gralloc ( 859): [Gralloc] info.upper_margin = ffffffff, info.lower_margin = f
fffffff
I/gralloc ( 859): [Gralloc] info.yres = 500, info.hsync_len = ffffffff
I/gralloc ( 859): [Gralloc] info.left_margin = ffffffff, info.right_margin = ff
ffffff
I/[MALI][Gralloc]( 859): ro_dpi: 320.000000
I/[MALI][Gralloc]( 859): using (fd=19)
I/[MALI][Gralloc]( 859): id = mtkfb
I/[MALI][Gralloc]( 859): xres = 720 px
I/[MALI][Gralloc]( 859): yres = 1280 px
I/[MALI][Gralloc]( 859): xres_virtual = 720 px
I/[MALI][Gralloc]( 859): yres_virtual = 3840 px
I/[MALI][Gralloc]( 859): bpp = 32
I/[MALI][Gralloc]( 859): r = 16:8
I/[MALI][Gralloc]( 859): g = 8:8
I/[MALI][Gralloc]( 859): b = 0:8
I/[MALI][Gralloc]( 859): width = 57 mm (320.842102 dpi)
I/[MALI][Gralloc]( 859): height = 102 mm (318.745087 dpi)
I/[MALI][Gralloc]( 859): refresh rate = 60.00 Hz
I/[MALI][Gralloc]( 859): init_framebuffer va: 0xb55c4000 mva: 0xfeb00000
I/Netd ( 858): execIptablesCommand android_fork_execvp exit
I/Netd ( 858): execIptablesCommand android_fork_execvp enter
Logcat Part 2
E/M4U_L ( 859): ioctl MTK_M4U_T_M4UDrv_CONSTRUCT fail! 2, No such file or di
rectory
I/hwcomposer( 859): [DPY] Display Information:
I/hwcomposer( 859): [DPY] # fo devices : 1
I/hwcomposer( 859): [DPY] -----------------------------
I/hwcomposer( 859): [DPY] Device id : 0
I/hwcomposer( 859): [DPY] Width : 720
I/hwcomposer( 859): [DPY] Height : 1280
I/hwcomposer( 859): [DPY] xdpi : 320.000000
I/hwcomposer( 859): [DPY] ydpi : 320.000000
I/hwcomposer( 859): [DPY] vsync : 1
I/hwcomposer( 859): [DPY] refresh : 16507097
I/hwcomposer( 859): [DPY] connected : 1
I/hwcomposer( 859): [DPY] subtype : 0
W/hwcomposer( 859): [EVENT] HW VSync State(1)
W/hwcomposer( 859): [EVENT] Start to listen uevent, addr.nl_pid(859)
I/hwcomposer( 859): [WKR] Set priority to RR: 268435543
I/hwcomposer( 859): [WKR] Set priority to RR: 268435543
I/hwcomposer( 859): [WKR] Set priority to RR: 268435543
I/hwcomposer( 859): [WKR] Set priority to RR: 268435543
I/SurfaceFlinger( 859): Using composer version 1.2
I/hwcomposer( 859): [HWC] getConfigs Display(0)
I/hwcomposer( 859): [HWC] getAttributes Display(0)
I/hwcomposer( 859): [HWC] getConfigs Display(1)
I/hwcomposer( 859): [HWC] getAttributes Display(1)
E/hwcomposer( 859): [HWC] Failed to get display attributes (dpy=1 is not connec
ted)
W/MALI ( 859): __egl_set_error:110: [WARNING]Mali EGL errorcode: 3001
W/MALI ( 859): __egl_set_error:110: [WARNING]Mali EGL errorcode: 3001
W/MALI ( 859): __egl_set_error:110: [WARNING]Mali EGL errorcode: 3001
W/MALI ( 859): __egl_set_error:110: [WARNING]Mali EGL errorcode: 3001
W/SurfaceFlinger( 859): no suitable EGLConfig found, trying a simpler query
W/MALI ( 859): __egl_set_error:110: [WARNING]Mali EGL errorcode: 3001
W/MALI ( 859): __egl_set_error:110: [WARNING]Mali EGL errorcode: 3001
F/SurfaceFlinger( 859): no suitable EGLConfig found, giving up
F/libc ( 859): Fatal signal 6 (SIGABRT) at 0x0000035b (code=-6), thread 859
(surfaceflinger)
F/libc ( 859): Unable to open connection to debuggerd: Connection refused
I/Netd ( 858): execIptablesCommand android_fork_execvp exit
I/Netd ( 858): execIptablesCommand android_fork_execvp enter
I/Netd ( 858): execIptablesCommand android_fork_execvp exit
I/Netd ( 858): execIptablesCommand android_fork_execvp enter
I/Netd ( 858): execIptablesCommand android_fork_execvp exit
I/Netd ( 858): execIptablesCommand android_fork_execvp enter
I/Netd ( 858): execIptablesCommand android_fork_execvp exit
I/Netd ( 858): execIptablesCommand android_fork_execvp enter
I/iptables( 858): iptables: Chain already exists.
I/iptables( 858): iptables terminated by exit(1)
I/Netd ( 858): execIptablesCommand android_fork_execvp exit
E/Netd ( 858): exec() res=0, status=256 for /system/bin/iptables -t filter -
N firewall
I/Netd ( 858): execIptablesCommand android_fork_execvp enter
I/ip6tables( 858): ip6tables: Chain already exists.
I/ip6tables( 858): ip6tables terminated by exit(1)
I/Netd ( 858): execIptablesCommand android_fork_execvp exit
E/Netd ( 858): exec() res=0, status=256 for /system/bin/ip6tables -t filter
-N firewall
I/Netd ( 858): execIptablesCommand android_fork_execvp enter
D/libEGL ( 784): loaded /system/lib/egl/libEGL_mali.so
D/libEGL ( 784): loaded /system/lib/egl/libGLESv1_CM_mali.so
I/Netd ( 783): execIptablesCommand android_fork_execvp exit
I/Netd ( 783): execIptablesCommand android_fork_execvp enter
D/libEGL ( 784): loaded /system/lib/egl/libGLESv2_mali.so
I/Netd ( 783): execIptablesCommand android_fork_execvp exit
I/Netd ( 783): execIptablesCommand android_fork_execvp enter
W/MALI ( 784): __egl_set_error:110: [WARNING]Mali EGL errorcode: 3003
W/libEGL ( 784): eglInitialize(0x1) failed (EGL_BAD_ALLOC)
I/Netd ( 783): execIptablesCommand android_fork_execvp exit
I/Netd ( 783): execIptablesCommand android_fork_execvp enter
I/[MALI][Gralloc]( 784): dlopen libsec_mem.so fail
I/gralloc ( 784): [Gralloc] refreshRate = 0, info.pixclock = ffffffff
I/gralloc ( 784): [Gralloc] info.upper_margin = ffffffff, info.lower_margin = f
fffffff
I/gralloc ( 784): [Gralloc] info.yres = 500, info.hsync_len = ffffffff
I/gralloc ( 784): [Gralloc] info.left_margin = ffffffff, info.right_margin = ff
ffffff
I/[MALI][Gralloc]( 784): ro_dpi: 320.000000
I/[MALI][Gralloc]( 784): using (fd=19)
I/[MALI][Gralloc]( 784): id = mtkfb
I/[MALI][Gralloc]( 784): xres = 720 px
I/[MALI][Gralloc]( 784): yres = 1280 px
I/[MALI][Gralloc]( 784): xres_virtual = 720 px
I/[MALI][Gralloc]( 784): yres_virtual = 3840 px
I/[MALI][Gralloc]( 784): bpp = 32
I/[MALI][Gralloc]( 784): r = 16:8
I/[MALI][Gralloc]( 784): g = 8:8
I/[MALI][Gralloc]( 784): b = 0:8
I/[MALI][Gralloc]( 784): width = 57 mm (320.842102 dpi)
I/[MALI][Gralloc]( 784): height = 102 mm (318.745087 dpi)
I/[MALI][Gralloc]( 784): refresh rate = 60.00 Hz
I/[MALI][Gralloc]( 784): init_framebuffer va: 0xb561c000 mva: 0xfeb00000
E/M4U_L ( 784): ioctl MTK_M4U_T_M4UDrv_CONSTRUCT fail! 2, No such file or di
rectory
I/hwcomposer( 784): [DPY] Display Information:
I/hwcomposer( 784): [DPY] # fo devices : 1
I/hwcomposer( 784): [DPY] -----------------------------
I/hwcomposer( 784): [DPY] Device id : 0
I/hwcomposer( 784): [DPY] Width : 720
I/hwcomposer( 784): [DPY] Height : 1280
I/Netd ( 783): execIptablesCommand android_fork_execvp exit
I/hwcomposer( 784): [DPY] xdpi : 320.000000
I/Netd ( 783): execIptablesCommand android_fork_execvp enter
I/hwcomposer( 784): [DPY] ydpi : 320.000000
I/hwcomposer( 784): [DPY] vsync : 1
I/hwcomposer( 784): [DPY] refresh : 16507097
I/hwcomposer( 784): [DPY] connected : 1
I/hwcomposer( 784): [DPY] subtype : 0
W/hwcomposer( 784): [EVENT] HW VSync State(1)
W/hwcomposer( 784): [EVENT] Start to listen uevent, addr.nl_pid(784)
I/hwcomposer( 784): [WKR] Set priority to RR: 268435543
I/SurfaceFlinger( 784): Using composer version 1.2
I/hwcomposer( 784): [HWC] getConfigs Display(0)
I/hwcomposer( 784): [HWC] getAttributes Display(0)
I/hwcomposer( 784): [WKR] Set priority to RR: 268435543
I/hwcomposer( 784): [WKR] Set priority to RR: 268435543
I/hwcomposer( 784): [HWC] getConfigs Display(1)
I/hwcomposer( 784): [HWC] getAttributes Display(1)
E/hwcomposer( 784): [HWC] Failed to get display attributes (dpy=1 is not connec
ted)
W/MALI ( 784): __egl_set_error:110: [WARNING]Mali EGL errorcode: 3001
W/MALI ( 784): __egl_set_error:110: [WARNING]Mali EGL errorcode: 3001
W/MALI ( 784): __egl_set_error:110: [WARNING]Mali EGL errorcode: 3001
W/MALI ( 784): __egl_set_error:110: [WARNING]Mali EGL errorcode: 3001
W/SurfaceFlinger( 784): no suitable EGLConfig found, trying a simpler query
W/MALI ( 784): __egl_set_error:110: [WARNING]Mali EGL errorcode: 3001
W/MALI ( 784): __egl_set_error:110: [WARNING]Mali EGL errorcode: 3001
F/SurfaceFlinger( 784): no suitable EGLConfig found, giving up
F/libc ( 784): Fatal signal 6 (SIGABRT) at 0x00000310 (code=-6), thread 784
(surfaceflinger)
F/libc ( 784): Unable to open connection to debuggerd: Connection refused
I/Netd ( 783): execIptablesCommand android_fork_execvp exit
I/Netd ( 783): execIptablesCommand android_fork_execvp enter
I/Netd ( 783): execIptablesCommand android_fork_execvp exit
I/Netd ( 783): execIptablesCommand android_fork_execvp enter
I/Netd ( 820): Netd 1.0 starting
W/InterfaceController( 820): Warning (dlopen failed: library "/system/lib/libne
tcmdiface.so" not found) while opening the net interface command library
I/Netd ( 820): execIptablesCommand android_fork_execvp enter
I/Netd ( 820): execIptablesCommand android_fork_execvp exit
I/Netd ( 820): execIptablesCommand android_fork_execvp enter
I/Netd ( 820): execIptablesCommand android_fork_execvp exit
I/Netd ( 820): execIptablesCommand android_fork_execvp enter
I/Netd ( 820): execIptablesCommand android_fork_execvp exit
I/Netd ( 820): execIptablesCommand android_fork_execvp enter
I/Netd ( 820): execIptablesCommand android_fork_execvp exit
I/Netd ( 820): execIptablesCommand android_fork_execvp enter
I/SurfaceFlinger( 821): [int main(int, char**)] set surfaceflinger is in root u
ser, adjust caps for its thread
I/SurfaceFlinger( 821): SurfaceFlinger is starting
I/SurfaceFlinger( 821): SurfaceFlinger's main thread ready to run. Initializing
graphics H/W...
D/libEGL ( 821): loaded /system/lib/egl/libEGL_mali.so
D/libEGL ( 821): loaded /system/lib/egl/libGLESv1_CM_mali.so
D/libEGL ( 821): loaded /system/lib/egl/libGLESv2_mali.so
I/Netd ( 820): execIptablesCommand android_fork_execvp exit
I/Netd ( 820): execIptablesCommand android_fork_execvp enter
W/MALI ( 821): __egl_set_error:110: [WARNING]Mali EGL errorcode: 3003
W/libEGL ( 821): eglInitialize(0x1) failed (EGL_BAD_ALLOC)
I/[MALI][Gralloc]( 821): dlopen libsec_mem.so fail
I/gralloc ( 821): [Gralloc] refreshRate = 0, info.pixclock = ffffffff
I/gralloc ( 821): [Gralloc] info.upper_margin = ffffffff, info.lower_margin = f
fffffff
I/gralloc ( 821): [Gralloc] info.yres = 500, info.hsync_len = ffffffff
I/gralloc ( 821): [Gralloc] info.left_margin = ffffffff, info.right_margin = ff
ffffff
I/[MALI][Gralloc]( 821): ro_dpi: 320.000000
I/[MALI][Gralloc]( 821): using (fd=19)
I/[MALI][Gralloc]( 821): id = mtkfb
I/[MALI][Gralloc]( 821): xres = 720 px
I/[MALI][Gralloc]( 821): yres = 1280 px
I/[MALI][Gralloc]( 821): xres_virtual = 720 px
I/[MALI][Gralloc]( 821): yres_virtual = 3840 px
I/[MALI][Gralloc]( 821): bpp = 32
I/[MALI][Gralloc]( 821): r = 16:8
I/[MALI][Gralloc]( 821): g = 8:8
I/[MALI][Gralloc]( 821): b = 0:8
I/[MALI][Gralloc]( 821): width = 57 mm (320.842102 dpi)
I/[MALI][Gralloc]( 821): height = 102 mm (318.745087 dpi)
I/[MALI][Gralloc]( 821): refresh rate = 60.00 Hz
I/[MALI][Gralloc]( 821): init_framebuffer va: 0xb5565000 mva: 0xfeb00000
E/M4U_L ( 821): ioctl MTK_M4U_T_M4UDrv_CONSTRUCT fail! 2, No such file or di
rectory
I/hwcomposer( 821): [DPY] Display Information:
I/hwcomposer( 821): [DPY] # fo devices : 1
I/hwcomposer( 821): [DPY] -----------------------------
I/hwcomposer( 821): [DPY] Device id : 0
I/hwcomposer( 821): [DPY] Width : 720
I/hwcomposer( 821): [DPY] Height : 1280
I/hwcomposer( 821): [DPY] xdpi : 320.000000
I/hwcomposer( 821): [DPY] ydpi : 320.000000
I/hwcomposer( 821): [DPY] vsync : 1
I/Netd ( 820): execIptablesCommand android_fork_execvp exit
I/Netd ( 820): execIptablesCommand android_fork_execvp enter
I/hwcomposer( 821): [DPY] refresh : 16507097
I/hwcomposer( 821): [DPY] connected : 1
I/hwcomposer( 821): [DPY] subtype : 0
W/hwcomposer( 821): [EVENT] HW VSync State(1)
W/hwcomposer( 821): [EVENT] Start to listen uevent, addr.nl_pid(821)
I/hwcomposer( 821): [WKR] Set priority to RR: 268435543
I/hwcomposer( 821): [WKR] Set priority to RR: 268435543
I/hwcomposer( 821): [WKR] Set priority to RR: 268435543
I/hwcomposer( 821): [WKR] Set priority to RR: 268435543
I/hwcomposer( 821): [WKR] Set priority to RR: 268435543
I/SurfaceFlinger( 821): Using composer version 1.2
I/hwcomposer( 821): [HWC] getConfigs Display(0)
I/hwcomposer( 821): [HWC] getAttributes Display(0)
I/hwcomposer( 821): [HWC] getConfigs Display(1)
I/hwcomposer( 821): [HWC] getAttributes Display(1)
E/hwcomposer( 821): [HWC] Failed to get display attributes (dpy=1 is not connec
ted)
W/MALI ( 821): __egl_set_error:110: [WARNING]Mali EGL errorcode: 3001
W/MALI ( 821): __egl_set_error:110: [WARNING]Mali EGL errorcode: 3001
W/MALI ( 821): __egl_set_error:110: [WARNING]Mali EGL errorcode: 3001
W/MALI ( 821): __egl_set_error:110: [WARNING]Mali EGL errorcode: 3001
W/SurfaceFlinger( 821): no suitable EGLConfig found, trying a simpler query
W/MALI ( 821): __egl_set_error:110: [WARNING]Mali EGL errorcode: 3001
W/MALI ( 821): __egl_set_error:110: [WARNING]Mali EGL errorcode: 3001
F/SurfaceFlinger( 821): no suitable EGLConfig found, giving up
F/libc ( 821): Fatal signal 6 (SIGABRT) at 0x00000335 (code=-6), thread 821
(surfaceflinger)
F/libc ( 821): Unable to open connection to debuggerd: Connection refused
I/Netd ( 820): execIptablesCommand android_fork_execvp exit
I/Netd ( 820): execIptablesCommand android_fork_execvp enter
I/Netd ( 820): execIptablesCommand android_fork_execvp exit
I/Netd ( 820): execIptablesCommand android_fork_execvp enter
I/Netd ( 820): execIptablesCommand android_fork_execvp exit
I/Netd ( 820): execIptablesCommand android_fork_execvp enter
I/Netd ( 820): execIptablesCommand android_fork_execvp exit
I/Netd ( 820): execIptablesCommand android_fork_execvp enter
I/sn ( 191): Retry 5
I/sn ( 191): Fail to access err=No such file or directory
I/sn ( 191): Fail to access err=No such file or directory
I/sn ( 191): Fail to access err=No such file or directory
I/sn ( 191): Check all possible paths
I/Netd ( 858): Netd 1.0 starting
W/InterfaceController( 858): Warning (dlopen failed: library "/system/lib/libne
tcmdiface.so" not found) while opening the net interface command library
I/Netd ( 858): execIptablesCommand android_fork_execvp enter
D/ADB_SERVICES( 198): adb fdevent_process list (12) (18)
D/ADB_SERVICES( 198): adb socket read list (18)
D/ADB_SERVICES( 198): read_data=11945
D/ADB_SERVICES( 198): max_read_time=0.000080 max_send_time=0.000063
D/ADB_SERVICES( 198): adb local_socket_ready list (18)
I/Netd ( 858): execIptablesCommand android_fork_execvp exit
I/Netd ( 858): execIptablesCommand android_fork_execvp enter
I/Netd ( 858): execIptablesCommand android_fork_execvp exit
I/Netd ( 858): execIptablesCommand android_fork_execvp enter
I/Netd ( 858): execIptablesCommand android_fork_execvp exit
I/Netd ( 858): execIptablesCommand android_fork_execvp enter
I/Netd ( 858): execIptablesCommand android_fork_execvp exit
I/Netd ( 858): execIptablesCommand android_fork_execvp enter
I/Netd ( 858): execIptablesCommand android_fork_execvp exit
I/Netd ( 858): execIptablesCommand android_fork_execvp enter
I/Netd ( 858): execIptablesCommand android_fork_execvp exit
I/Netd ( 858): execIptablesCommand android_fork_execvp enter
I/Netd ( 858): execIptablesCommand android_fork_execvp exit
I/Netd ( 858): execIptablesCommand android_fork_execvp enter
I/Netd ( 858): execIptablesCommand android_fork_execvp exit
I/Netd ( 858): execIptablesCommand android_fork_execvp enter
I/SurfaceFlinger( 859): [int main(int, char**)] set surfaceflinger is in root u
ser, adjust caps for its thread
I/SurfaceFlinger( 859): SurfaceFlinger is starting
I/SurfaceFlinger( 859): SurfaceFlinger's main thread ready to run. Initializing
graphics H/W...
D/libEGL ( 859): loaded /system/lib/egl/libEGL_mali.so
D/libEGL ( 859): loaded /system/lib/egl/libGLESv1_CM_mali.so
I/Netd ( 858): execIptablesCommand android_fork_execvp exit
I/Netd ( 858): execIptablesCommand android_fork_execvp enter
I/Netd ( 858): execIptablesCommand android_fork_execvp exit
I/Netd ( 858): execIptablesCommand android_fork_execvp enter
D/libEGL ( 859): loaded /system/lib/egl/libGLESv2_mali.so
I/Netd ( 858): execIptablesCommand android_fork_execvp exit
I/Netd ( 858): execIptablesCommand android_fork_execvp enter
W/MALI ( 859): __egl_set_error:110: [WARNING]Mali EGL errorcode: 3003
W/libEGL ( 859): eglInitialize(0x1) failed (EGL_BAD_ALLOC)
I/[MALI][Gralloc]( 859): dlopen libsec_mem.so fail
I/gralloc ( 859): [Gralloc] refreshRate = 0, info.pixclock = ffffffff
I/gralloc ( 859): [Gralloc] info.upper_margin = ffffffff, info.lower_margin = f
fffffff
I/gralloc ( 859): [Gralloc] info.yres = 500, info.hsync_len = ffffffff
I/gralloc ( 859): [Gralloc] info.left_margin = ffffffff, info.right_margin = ff
ffffff
I/[MALI][Gralloc]( 859): ro_dpi: 320.000000
I/[MALI][Gralloc]( 859): using (fd=19)
I/[MALI][Gralloc]( 859): id = mtkfb
I/[MALI][Gralloc]( 859): xres = 720 px
I/[MALI][Gralloc]( 859): yres = 1280 px
I/[MALI][Gralloc]( 859): xres_virtual = 720 px
I/[MALI][Gralloc]( 859): yres_virtual = 3840 px
I/[MALI][Gralloc]( 859): bpp = 32
I/[MALI][Gralloc]( 859): r = 16:8
I/[MALI][Gralloc]( 859): g = 8:8
I/[MALI][Gralloc]( 859): b = 0:8
I/[MALI][Gralloc]( 859): width = 57 mm (320.842102 dpi)
I/[MALI][Gralloc]( 859): height = 102 mm (318.745087 dpi)
I/[MALI][Gralloc]( 859): refresh rate = 60.00 Hz
I/[MALI][Gralloc]( 859): init_framebuffer va: 0xb55c4000 mva: 0xfeb00000
I/Netd ( 858): execIptablesCommand android_fork_execvp exit
I/Netd ( 858): execIptablesCommand android_fork_execvp enter
E/M4U_L ( 859): ioctl MTK_M4U_T_M4UDrv_CONSTRUCT fail! 2, No such file or di
rectory
I/hwcomposer( 859): [DPY] Display Information:
I/hwcomposer( 859): [DPY] # fo devices : 1
I/hwcomposer( 859): [DPY] -----------------------------
I/hwcomposer( 859): [DPY] Device id : 0
I/hwcomposer( 859): [DPY] Width : 720
I/hwcomposer( 859): [DPY] Height : 1280
I/hwcomposer( 859): [DPY] xdpi : 320.000000
I/hwcomposer( 859): [DPY] ydpi : 320.000000
I/hwcomposer( 859): [DPY] vsync : 1
I/hwcomposer( 859): [DPY] refresh : 16507097
I/hwcomposer( 859): [DPY] connected : 1
I/hwcomposer( 859): [DPY] subtype : 0
W/hwcomposer( 859): [EVENT] HW VSync State(1)
W/hwcomposer( 859): [EVENT] Start to listen uevent, addr.nl_pid(859)
I/hwcomposer( 859): [WKR] Set priority to RR: 268435543
I/hwcomposer( 859): [WKR] Set priority to RR: 268435543
I/hwcomposer( 859): [WKR] Set priority to RR: 268435543
I/hwcomposer( 859): [WKR] Set priority to RR: 268435543
I/SurfaceFlinger( 859): Using composer version 1.2
I/hwcomposer( 859): [HWC] getConfigs Display(0)
I/hwcomposer( 859): [HWC] getAttributes Display(0)
I/hwcomposer( 859): [HWC] getConfigs Display(1)
I/hwcomposer( 859): [HWC] getAttributes Display(1)
E/hwcomposer( 859): [HWC] Failed to get display attributes (dpy=1 is not connec
ted)
W/MALI ( 859): __egl_set_error:110: [WARNING]Mali EGL errorcode: 3001
W/MALI ( 859): __egl_set_error:110: [WARNING]Mali EGL errorcode: 3001
W/MALI ( 859): __egl_set_error:110: [WARNING]Mali EGL errorcode: 3001
W/MALI ( 859): __egl_set_error:110: [WARNING]Mali EGL errorcode: 3001
W/SurfaceFlinger( 859): no suitable EGLConfig found, trying a simpler query
W/MALI ( 859): __egl_set_error:110: [WARNING]Mali EGL errorcode: 3001
W/MALI ( 859): __egl_set_error:110: [WARNING]Mali EGL errorcode: 3001
F/SurfaceFlinger( 859): no suitable EGLConfig found, giving up
F/libc ( 859): Fatal signal 6 (SIGABRT) at 0x0000035b (code=-6), thread 859
(surfaceflinger)
F/libc ( 859): Unable to open connection to debuggerd: Connection refused
I/Netd ( 858): execIptablesCommand android_fork_execvp exit
I/Netd ( 858): execIptablesCommand android_fork_execvp enter
I/Netd ( 858): execIptablesCommand android_fork_execvp exit
I/Netd ( 858): execIptablesCommand android_fork_execvp enter
I/Netd ( 858): execIptablesCommand android_fork_execvp exit
I/Netd ( 858): execIptablesCommand android_fork_execvp enter
I/Netd ( 858): execIptablesCommand android_fork_execvp exit
I/Netd ( 858): execIptablesCommand android_fork_execvp enter
I/iptables( 858): iptables: Chain already exists.
I/iptables( 858): iptables terminated by exit(1)
I/Netd ( 858): execIptablesCommand android_fork_execvp exit
E/Netd ( 858): exec() res=0, status=256 for /system/bin/iptables -t filter -
N firewall
I/Netd ( 858): execIptablesCommand android_fork_execvp enter
I/ip6tables( 858): ip6tables: Chain already exists.
I/ip6tables( 858): ip6tables terminated by exit(1)
I/Netd ( 858): execIptablesCommand android_fork_execvp exit
E/Netd ( 858): exec() res=0, status=256 for /system/bin/ip6tables -t filter
-N firewall
I/Netd ( 858): execIptablesCommand android_fork_execvp enter
[/SIZE][/B]
Now please help me! As I am clueless where to begin or where to end! :crying::silly:
Fixed it
Moderator please close this thread
Sent from my bobobibi
Tech N You said:
Fixed it
Moderator please close this thread
Click to expand...
Click to collapse
How did you fix it?
Bormental said:
How did you fix it?
Click to expand...
Click to collapse
LIBEGL errors are gpu ones.
I replaced libmali.so and it worked
Sent from 8x-1000 Using XXX ROM (Xceptional XPERIA Xperiance)
Tech N You said:
LIBEGL errors are gpu ones.
I replaced libmali.so and it worked
Click to expand...
Click to collapse
it works. Thank you!
Bormental said:
it works. Thank you!
Click to expand...
Click to collapse
Glad I helped you
Sent from 8x-1000 Using XXX ROM (Xceptional XPERIA Xperiance)
Hi my friends,
i´m trying to port Cyanogenmod 12 to my Phone (Note 3 neo | Android 4.4.2).
It´s booting smooth (with a black screen) until this errors appears:
01-01 00:46:58.926: I/cm(2145): Welcome to Android 5.1.1 / CyanogenMod-12.1-20150906-UNOFFICIAL-hlltexx
01-01 00:46:58.986: D/libEGL(2093): loaded /vendor/lib/egl/libGLES_mali.so
01-01 00:46:59.011: D/gpsd(2110): WakeLock(Release,GPSD)
01-01 00:46:59.015: I/gpsd_d(2110): GNSS: 205752
01-01 00:46:59.016: D/wrapperGPS(2110): wrapperOpenClient_RILD
01-01 00:46:59.016: D/wrapperGPS(2110): wrapperRegisterRequestCompleteHandler
01-01 00:46:59.016: D/wrapperGPS(2110): wrapperRegisterUnsolicitedHandler id(12009), handler(0x40020159)
01-01 00:46:59.016: D/wrapperGPS(2110): wrapperRegisterErrorCallback
01-01 00:46:59.016: D/wrapperGPS(2110): wrapperConnect_RILD
01-01 00:46:59.017: W/libEGL(2093): eglInitialize(0x423311e8) failed (EGL_NOT_INITIALIZED)
01-01 00:46:59.020: I/gralloc(2093): using (id=)
01-01 00:46:59.020: I/gralloc(2093): xres = 720 px
01-01 00:46:59.020: I/gralloc(2093): yres = 1280 px
01-01 00:46:59.020: I/gralloc(2093): width = 68 mm (268.941162 dpi)
01-01 00:46:59.020: I/gralloc(2093): height = 122 mm (266.491791 dpi)
01-01 00:46:59.020: I/gralloc(2093): refresh rate = 59.37 Hz
01-01 00:46:59.054: D/hwcomposer(2093): using
01-01 00:46:59.054: D/hwcomposer(2093): xres = 720 px
01-01 00:46:59.054: D/hwcomposer(2093): yres = 1280 px
01-01 00:46:59.054: D/hwcomposer(2093): width = 68 mm (268.941000 dpi)
01-01 00:46:59.054: D/hwcomposer(2093): height = 122 mm (266.491000 dpi)
01-01 00:46:59.054: D/hwcomposer(2093): refresh rate = 59 Hz
01-01 00:46:59.054: I/hwcomposer(2093): Failed to open vsync attribute at /sys/devices/exynos5-fb.1/vsync
01-01 00:46:59.054: I/hwcomposer(2093): Retrying with /sys/devices/platform/exynos-sysmmu.11exynos5-fb.1/vsync
01-01 00:46:59.054: I/hwcomposer(2093): Failed to open vsync attribute at /sys/devices/exynos5-fb.1/vsync
01-01 00:46:59.054: I/hwcomposer(2093): Retrying with /sys/devices/platform/exynos-sysmmu.30/exynos-sysmmu.11/exynos5-fb.1/vsync
01-01 00:46:59.054: I/hwcomposer(2093): PSR info devname = /sys/devices/platform/exynos-sysmmu.30/exynos-sysmmu.11/exynos5-fb.1/psr_info
01-01 00:46:59.054: W/hwcomposer(2093): HWC needs to know whether LCD driver is using PSR mode or not
01-01 00:46:59.055: I/hwcomposer(2093): PSR mode is 0(0: video mode, 1: DP PSR mode, 2: MIPI-DSI command mode)
01-01 00:46:59.056: I/SurfaceFlinger(2093): Using composer version 1.3
01-01 00:46:59.062: W/SurfaceFlinger(2093): no suitable EGLConfig found, trying a simpler query
01-01 00:46:59.062: A/SurfaceFlinger(2093): no suitable EGLConfig found, giving up
01-01 00:46:59.062: A/SurfaceFlinger(2093): --------- beginning of crash
Click to expand...
Click to collapse
I use the "libGLES_mali.so" from the 4.4.2 Stock Rom.
Could it be the Problem?
Thank you for help,
Julian
No idea? :/
How you solved?
hey i ported miui to yuphoria but back spker not working when i increase voice and bluetooth volume i receive sound from front spkr anyone here help me how to fix
log is attach below:-
Quote:
---- Jan 1, 2016 5:43:36 AM ----
01-02 10:31:50.459 3724 3724 I InputManager: Initializing input manager, mUseDevInputEventForAudioJack=true
01-02 10:31:51.159 3724 3724 I SystemServer: Audio Service
01-02 10:31:51.219 3724 3724 W WiredAccessoryManager: This kernel does not have usb audio support
01-02 10:31:51.219 3724 3724 W WiredAccessoryManager: This kernel does not have HDMI audio support
01-01 05:30:02.239 3724 4111 E SoundPool: error loading /system/media/audio/ui/KeypressInvalid.ogg
01-01 05:30:02.239 3724 4111 W AudioService: Soundpool could not load file: /system/media/audio/ui/KeypressInvalid.ogg
01-01 05:30:02.269 307 4496 E AudioPolicyManager: zw_AudioPolicyManager::isStateInCall: 0
01-01 05:30:02.269 307 4496 E AudioPolicyManager: zw_AudioPolicyManager::isStateInCall: 0
01-01 05:30:02.269 307 4499 E OMXMaster: A component of name 'OMX.qcom.audio.decoder.aac' already exists, ignoring this one.
01-01 05:30:02.379 307 4499 E QC_EVRCENC: component init: role = OMX.qcom.audio.encoder.evrc
01-01 05:30:02.379 307 4499 I QC_EVRCENC: component init: role = OMX.qcom.audio.encoder.evrc
01-01 05:30:02.379 307 4499 I QC_EVRCENC: component_init: Component OMX.qcom.audio.encoder.evrc LOADED
01-01 05:30:02.389 307 4499 E QC_QCELP13ENC: component init: role = OMX.qcom.audio.encoder.qcelp13
01-01 05:30:02.389 307 4499 I QC_QCELP13ENC: component init: role = OMX.qcom.audio.encoder.qcelp13
0-01 05:30:02.389 307 4499 I QC_QCELP13ENC: component_init: Component OMX.qcom.audio.encoder.qcelp13 LOADED
01-01 05:30:02.549 307 4499 E OMX : FAILED to allocate omx component 'OMX.qcom.audio.decoder.wma'
01-01 05:30:02.549 307 4499 E OMX : FAILED to allocate omx component 'OMX.qcom.audio.decoder.wmaLossLess'
01-01 05:30:02.549 307 4499 E OMX : FAILED to allocate omx component 'OMX.qcom.audio.decoder.wma10Pro'
01-0105:30:02.549 307 4499 E OMX : FAILED to allocate omx component 'OMX.qcom.audio.decoder.amrwbplus'
01-01 05:30:02.559 307 4499 I OMX_QCELP13_DEC: component init: role = OMX.qcom.audio.decoder.Qcelp13
01-01 05:30:02.559 307 4499 I OMX_QCELP13_DEC: component_init: Component OMX.qcom.audio.decoder.Qcelp13 LOADED
01-01 05:30:02.569 307 4499 E OMX_EVRC_DEC: COMPONENT INIT OMX.qcom.audio.decoder.evrc
01-01 05:30:02.819 307 4827 E AudioPolicyManager: zw_AudioPolicyManager::isStateInCall: 0
01-01 05:30:02.849 307 4857 E AudioPolicyManager: zw_AudioPolicyManager::isStateInCall: 0
01-01 05:30:02.849 307 4857 E AudioPolicyManager: zw_AudioPolicyManager::isStateInCall: 0
01-01 05:30:02.899 307 4877 E AudioPolicyManager: zw_AudioPolicyManager::isStateInCall: 0
01-01 05:30:02.899 307 4877 E AudioPolicyManager: zw_AudioPolicyManager::isStateInCall: 0
01-01 05:30:02.939 307 4896 E AudioPolicyManager: zw_AudioPolicyManager::isStateInCall: 0
01-01 05:30:02.939 307 4896 E AudioPolicyManager: zw_AudioPolicyManager::isStateInCall: 0
01-01 05:30:04.949 307 4113 E AudioPolicyManager: zw_AudioPolicyManager::isStateInCall: 0
01-01 05:30:04.949 307 4113 E AudioPolicyManager: zw_AudioPolicyManager::isStateInCall: 0
01-01 05:30:04.949 307 4113 E AudioPolicyManager: zw_AudioPolicyManager::isStateInCall: 0
01-01 05:30:04.949 307 4113 E AudioPolicyManager: zw_AudioPolicyManager::isStateInCall: 0
01-01 05:30:04.949 307 4113 E AudioPolicyManager: zw_AudioPolicyManager::isStateInCall: 0
01-01 05:30:04.949 307 4113 E AudioPolicyManager: zw_AudioPolicyManager::isStateInCall: 0
01-01 05:30:04.949 307 4113 E AudioPolicyManager: zw_AudioPolicyManager::isStateInCall: 0
01-01 05:30:04.949 307 4113 E AudioPolicyManager: zw_AudioPolicyManager::isStateInCall: 0
01-01 05:30:04.949 307 4113 E AudioPolicyManager: unknown stream type 13
01-01 05:30:04.949 307 4113 E AudioPolicyManager: unknown stream type 13
01-01 05:30:16.899 3724 4111 W AudioTrack: AUDIO_OUTPUT_FLAG_FAST denied by client
01-01 05:30:16.899 307 865 I soundtrigger: audio_extn_sound_trigger_update_device_status: device 0x2 of type 0 for Event 1, with Raise=0
01-01 05:30:16.909 307 4113 I AudioFlinger: setAppName(), name=[system_server], active=[1]
01-01 05:30:16.909 307 865 W audio_hw_utils: audio_extn_utils_update_stream_app_type_cfg: App type could not be selected. Falling back to default
01-01 05:30:16.909 307 865 I audio_hw_primary: select_devices Selected apptype: 69936
01-01 05:30:16.909 307 865 I audio_hw_utils: audio_extn_utils_send_app_type_cfg app_type 69936, acdb_dev_id 14, sample_rate 48000
01-01 05:30:17.139 307 847 E AudioPolicyManager: zw_AudioPolicyManager::isStateInCall: 0
01-01 05:30:17.149 307 847 E AudioPolicyManager: zw_AudioPolicyManager::isStateInCall: 0
01-01 05:30:17.149 307 847 E AudioPolicyManager: unknown stream type 13
01-01 05:30:17.149 307 847 E AudioPolicyManager: zw_AudioPolicyManager::isStateInCall: 0
01-01 05:30:17.149 307 847 E AudioPolicyManager: unknown stream type 13
01-01 05:30:17.149 307 847 E AudioPolicyManager: unknown stream type 13