Wildheroc=>ported=>ROSE V3.6 not booting? - Hero, G2 Touch Q&A, Help & Troubleshooting

Hi Im flashing this rom but when I flash it Im stuck at HERO logo when booting :-/ what am I doing wrong? I wipe cache than wipe data factory restart and than flash the v3.6 rom...tryed the v3.0 and with it, its just boot looping...my hero is GSM

Try to wipe all again from recovery and flash again. If no luck again download the ROM again and then flash

I did the same thing. Waited for ages. Ended up rebooting phone which went on to boot fully.

Prof Peach said:
I did the same thing. Waited for ages. Ended up rebooting phone which went on to boot fully.
Click to expand...
Click to collapse
Ive been waiting for an hour+ now but still didnt boot you did reboot by pulling out the battery or it rebooted by itself ?

d4ob said:
Ive been waiting for an hour+ now but still didnt boot you did reboot by pulling out the battery or it rebooted by itself ?
Click to expand...
Click to collapse
I cant honstly remember but I probably did....yes.

d4ob said:
Hi Im flashing this rom but when I flash it Im stuck at HERO logo when booting :-/ what am I doing wrong? I wipe cache than wipe data factory restart and than flash the v3.6 rom...tryed the v3.0 and with it, its just boot looping...my hero is GSM
Click to expand...
Click to collapse
If you have an ext, wipe that as well. BTW which recovery are you using?

try wiping the cache and then everything else, it will then work for sure

That's strange could u double check if its 3.5 or 3.6? Cos I remember having boot issues on 3.5 that's why deleted from op n rebuilt it as 3.6
Sent from my Hero using xda premium

Related

Stuck on boot screen

Hi guys,
I just flashed criskelo rom to my phone, but I tried to do a hard reset using the code (*2767....) and now my phone is stuck on the boot screen (SAMSUNG). I've waited a long time already, left it over night and nothing.
Also I tried to recover the back up I made with CWM, but I'm again stuck on boot screen...
Any ideas on what I can do??
Thanks
go to recovery, do a data reset and wipe cache..hope this helps..worked for me a few times.
ahmedmaaiee said:
go to recovery, do a data reset and wipe cache..hope this helps..worked for me a few times.
Click to expand...
Click to collapse
Already tried data/factory reset, wipe cache partition and wip Dalvik Cache. Still not working :crying:
Ryudo0 said:
Already tried data/factory reset, wipe cache partition and wip Dalvik Cache. Still not working :crying:
Click to expand...
Click to collapse
have you tried flashing to the stock rom using Odin?
Ryudo0 said:
Already tried data/factory reset, wipe cache partition and wip Dalvik Cache. Still not working :crying:
Click to expand...
Click to collapse
Try either flashing a stock firmware through Odin, or go into recovery and format /system in addition to wiping data, cache and Dalvik, and install the ROM zip again.
Arachnid92 said:
Try either flashing a stock firmware through Odin, or go into recovery and format /system in addition to wiping data, cache and Dalvik, and install the ROM zip again.
Click to expand...
Click to collapse
OMG THX...
I just flashed a stock firmware through ODIN and it's ALIVE!! Thanks...
(before i flashed on ODIN I restarted my laptop and it was stuck on BOOT... its like a curse omg... i had to go to safe mode to make it work again...)
Its all working now thanks
EDIT: Well... i rooted the phone again, flashed the rom, but this time I tried to make the wipe cache and factory reset through the CWM (volup+home+power), but I got stuck on boot screen again.... Guess I'll have to stay with the rom but without wiping it
Ryudo0 said:
OMG THX...
I just flashed a stock firmware through ODIN and it's ALIVE!! Thanks...
(before i flashed on ODIN I restarted my laptop and it was stuck on BOOT... its like a curse omg... i had to go to safe mode to make it work again...)
Its all working now thanks
EDIT: Well... i rooted the phone again, flashed the rom, but this time I tried to make the wipe cache and factory reset through the CWM (volup+home+power), but I got stuck on boot screen again.... Guess I'll have to stay with the rom but without wiping it
Click to expand...
Click to collapse
If I remember correctly, Criskelo ROM does not require you to wipe anything if you're coming from a stock ROM (it does everything through the install script). So just install it and live happily ever after
getting stuck on the boot screen is normal...i did twice already while flashing new rooms...usualy for forgeting to wipe. reflashing the stock rom always works.

Need help with Paranoid Android Rom

Just got a new EvoLTE, it's rooted, unlocked, S-Off and has TWRP. I wiped the cache and the Dalvik and tried to install Paranoid Android. My phone boots up to the Rom Logo but is stuck. Am I missing something? How do I boot into recovery since this phone doesn't have a removable battery?
funkatronic said:
Just got a new EvoLTE, it's rooted, unlocked, S-Off and has TWRP. I wiped the cache and the Dalvik and tried to install Paranoid Android. My phone boots up to the Rom Logo but is stuck. Am I missing something? How do I boot into recovery since this phone doesn't have a removable battery?
Click to expand...
Click to collapse
Hold the power button down until it does a hard shut down. Then hold volume down and power and it should put you into hboot and give you the option to select recovery.
Once in recovery you will want to wipe Cache and Dalvik Cache X3 (just what i do)
then do a factory reset and system reset
Than flash rom and see how that goes.
Worked like a charm. Thanks a bunch.
funkatronic said:
Worked like a charm. Thanks a bunch.
Click to expand...
Click to collapse
NP! Glad I could be of assistance!
Okay, ran into the same issue trying to install a battery mod. Stuck on the boot animation again. Dow I wipe x3 and try to re-install the mod do I have to start from scratch again?
funkatronic said:
Okay, ran into the same issue trying to install a battery mod. Stuck on the boot animation again. Dow I wipe x3 and try to re-install the mod do I have to start from scratch again?
Click to expand...
Click to collapse
Did you flash battery mod from sense on aosp rom? If yes, then you have to start from scratch. You have to be more specific on what mod you flashed. You have to wipe cache and dalvik cache before flashing any mod.
Sent from my lair.

[Q] Stock on Boot Animation Build 10 Beans

I downloaded build 10 from beans, but I am stuck on boot animation and cant get into recovery? Someone please help me.
Have you pulled the battery out it back in then held volume up, home and power to get into recovery
Sent from my SCH-I605 using Tapatalk 2
Paulster69 said:
I downloaded build 10 from beans, but I am stuck on boot animation and cant get into recovery? Someone please help me.
Click to expand...
Click to collapse
Yeah, after manually retrieving your recovery, wipe it properly (wipe partition, dalvik cache, mount and storage-> format system, and factory reset), and reflash your rom.
Paulster69,
Just curious to find out if you were able to get your issue resolved? I see where you posted yesterday morning, but hadn't posted back since.

Phone won't boot past Samsung Screen

So I just restarted my phone after doing nothing particular and it just will not boot. It gets to the Samsung screen with the Unlocked Lock that says 'Custom' and it just freezes there. I pulled the battery and boot again, nothing. I booted into recovery and wiped it all and re-flashed the bebloated ROM, still won't boot. Anyone have any other suggestions???
Emerica. said:
So I just restarted my phone after doing nothing particular and it just will not boot. It gets to the Samsung screen with the Unlocked Lock that says 'Custom' and it just freezes there. I pulled the battery and boot again, nothing. I booted into recovery and wiped it all and re-flashed the bebloated ROM, still won't boot. Anyone have any other suggestions???
Click to expand...
Click to collapse
whipe the delvic cache and cache. Which recovery you have installed?
solson20 said:
whipe the delvic cache and cache. Which recovery you have installed?
Click to expand...
Click to collapse
TWRP. Also I did try wiping dalvik and cache.
Emerica. said:
TWRP. Also I did try wiping dalvik and cache.
Click to expand...
Click to collapse
sounds stupid, but try whiping it like 2-3 times in a row and then reboot
Try http://forum.xda-developers.com/showthread.php?t=2301259 and let us know. I have the very same issue with my phone but ended up giving up and getting verizon to replace it but would really like to know if this works.
Emerica. said:
So I just restarted my phone after doing nothing particular and it just will not boot. It gets to the Samsung screen with the Unlocked Lock that says 'Custom' and it just freezes there. I pulled the battery and boot again, nothing. I booted into recovery and wiped it all and re-flashed the bebloated ROM, still won't boot. Anyone have any other suggestions???
Click to expand...
Click to collapse
Take out the SD card and try a reboot...if that doesn't work.....its odin time.
did you pull the battery for 10 seconds and retry?
same problem
I have the same problem. The only rom I can boot is slim bean.
i have had this happen to me and the only way i was able to fix was to odin back to stock grab this
(SCH-I545_MDK_562219_Stock_Restore)
http://forum.xda-developers.com/showthread.php?t=2289325:good:
Hey guys, sorry it took so long for me to get back. After 3 wipes I was able to get everything back to stable and it has not locked up like that again. Thanks for all your suggestions, I may need them again someday haha.
damn
basically have the same problem but i have a stock rooted backup in twrp... (which i have to restore once a day).... every time the phone dies or or battery comes out, there no way of starting without wipe and restore, and even then it doesn't let me boot into twrp until a few tries also once in a while my twrp asks for a password, which ive never put on.. so anyways if theere are any new suggestions id be happy to try them out

[Q] Issues after switching to cwm from twrp

Been using twrp since rooting note II. I wanted to try out 4.4 PA but they said to only use cwm. It was late so I decided to be lazy and since I used to use rom manager all the time I installed it to flash cwm recovery then booted into recovery to install touch version. It wasn't showing the touch version so selected to restart to check to see where I saved it to it would not boot past the first "note II" splash screen. Battery pull then back into recovery and went ahead and flashed PA 4.4 and now it will get past the splash screen then shows boot animation but then starts all over.
Is this a rom manager issue?
can I flash twrp from within cwm recovery?
will I have to basically reroot it?
Any suggestions on how to get back to twrp and to a usable phone?
thanks
If you download a .zip of twrp and flash it you will have twrp for your recovery.
As long as you flash a rooted rom, you will be rooted.
Not sure what happened with the boot loop, did you by chance wipe the system without flashing another before booting?
Sent from my SCH-I605 using Tapatalk
cadavjo said:
If you download a .zip of twrp and flash it you will have twrp for your recovery.
As long as you flash a rooted rom, you will be rooted.
Not sure what happened with the boot loop, did you by chance wipe the system without flashing another before booting?
Sent from my SCH-I605 using Tapatalk
Click to expand...
Click to collapse
Nope did my standard wipe cache, wipe dalvik, and factory reset then flashed rom then gapps. Going to go back to twrp and wait for 4.4 to be more stable before I try it out again and maybe then I can use twrp to flash it.
thanks for the help
cadavjo said:
If you download a .zip of twrp and flash it you will have twrp for your recovery.
As long as you flash a rooted rom, you will be rooted.
Not sure what happened with the boot loop, did you by chance wipe the system without flashing another before booting?
Sent from my SCH-I605 using Tapatalk
Click to expand...
Click to collapse
that didn't work. flashed newest twrp then rebooted into it and tried to flash tweaked and sticks at the splash screen again
jdpeck said:
that didn't work. flashed newest twrp then rebooted into it and tried to flash tweaked and sticks at the splash screen again
Click to expand...
Click to collapse
Have you wiped data at all? You need to wipe data / factory reset when switching roms, and it sounds like you havent.
fallingup said:
Have you wiped data at all? You need to wipe data / factory reset when switching roms, and it sounds like you havent.
Click to expand...
Click to collapse
As stated above, on both cwm and twrp I wiped caches and did factory reset and still having the issues. Once back on twrp I even formatted internal memory thinking maybe rom manager messed something up on it and still can't get passed the splash screen.
jdpeck said:
As stated above, on both cwm and twrp I wiped caches and did factory reset and still having the issues. Once back on twrp I even formatted internal memory thinking maybe rom manager messed something up on it and still can't get passed the splash screen.
Click to expand...
Click to collapse
Copy a ROM to your SD card (external not internal)
Install cwm and format data (actually full format, where /data/media gets wiped) and system
Install rom
Reboot
TWRP has some issues randomly with corrupting /data, that's why I no longer use it.
fallingup said:
Copy a ROM to your SD card (external not internal)
Install cwm and format data (actually full format, where /data/media gets wiped) and system
Install rom
Reboot
TWRP has some issues randomly with corrupting /data, that's why I no longer use it.
Click to expand...
Click to collapse
Finally got it. Thought using odin to flash back to root 66 and start fresh would work but after that it was still going to the splash screen then black and a battery pull had to be done. TWRP back ups would fail when trying to restore, so I reverted back to an older version of twrp and it finally let a back up be installed and it booted up just fine!!
thanks for all the suggestions
Im having a similar problem to yours, I am using twrp and flashed PA 3.99 the phone works great, but if my battery dies or i restart the phone or shut it down it automatically wont get passed the samsung logo, or sometimes the PA logo, the only work arounds ive seen to it is to wipe the cache and dalvik to boot, but when that fails i have to install the whole rom over again. any ideas?

Categories

Resources