Related
I've been reading through these forums for a few days now and I can't seem to find what I'm looking for. Basically, I want to be able to listen to my 8125 through stereo bluetooth headphones. As I understand it I need to enable A2DP. I've seen a lot of topics on the G3 side of things but before I try anything I would like to confirm which ROM I need for a G4 to make this work.
I have the tools package and ruu_480 package that should build a new ROM while leaving the IPL/SPL alone in my CID-Locked 8125. So I think all I need is the .nb portion that enables A2DP. And, if I've read everything correctly, I should be able to use typho5 to extract the proper .nb piece I need for this from whatever ROM I eventually get.
So, the short version of this is: What ROM do I need to get to enable A2DP on my CID-Locked 8125 G4? And what piece of that ROM, specifically, do I need to include in a cooked ROM?
G4 CID LOCKED w/ A2DP
WM6 MB edition have A2DP included on ROM. I have it running on my 8125 CID locked.
connect your phone w/ activesync, when its done click explore. drag and drop these 2 files to that folder. Go to you phone and click file explorer from programs. If u dont see those 2 files at the bottom then click the My documents folder and u should see them there. click a2dpfix.cab 1st and when it installs reset your phone(tiny reset button next to your camera button) repeat with other file and reset again. Install your headphones and u should see a new profile....stereo headset...make sure thats clicked and setup your BT normally. thats pretty much it.
Thanks to whoever supplied these files as they are not mine, I as well was in your position 4 days ago and all I wanted to do was connect my HT820's. Have fun
so what is the difference between the zoa2dp.cab you have listed and the zoa2dp_113.cab I have installed already?
Does anyone know if this A2DP fix will work on Dopod 818?
You guys are awsome! thanks very much for your hard work.
Cingular 8125 with Jabra BT620s.
After applying the files gotten off this thread, Jabra works well with Cingular 8125, except that the audio occasionally drops out for a couple of seconds. Anyone know of a fix for this?
theeoriginal1 said:
connect your phone w/ activesync, when its done click explore. drag and drop these 2 files to that folder. Go to you phone and click file explorer from programs. If u dont see those 2 files at the bottom then click the My documents folder and u should see them there. click a2dpfix.cab 1st and when it installs reset your phone(tiny reset button next to your camera button) repeat with other file and reset again. Install your headphones and u should see a new profile....stereo headset...make sure thats clicked and setup your BT normally. thats pretty much it.
Thanks to whoever supplied these files as they are not mine, I as well was in your position 4 days ago and all I wanted to do was connect my HT820's. Have fun
Click to expand...
Click to collapse
TNT and NBD ROMs has the new updated A2DP stack from MS. Try these ROMs.
theeoriginal1 said:
connect your phone w/ activesync, when its done click explore. drag and drop these 2 files to that folder. Go to you phone and click file explorer from programs. If u dont see those 2 files at the bottom then click the My documents folder and u should see them there. click a2dpfix.cab 1st and when it installs reset your phone(tiny reset button next to your camera button) repeat with other file and reset again. Install your headphones and u should see a new profile....stereo headset...make sure thats clicked and setup your BT normally. thats pretty much it.
Thanks to whoever supplied these files as they are not mine, I as well was in your position 4 days ago and all I wanted to do was connect my HT820's. Have fun
Click to expand...
Click to collapse
You guys are awseome it worked fine on my cingular8125 just like a charm.
Thx somuch
2 years later and this still works like a charm. Thank you very much.
Updated A2DP stacks? Where?
new2city said:
TNT and NBD ROMs has the new updated A2DP stack from MS. Try these ROMs.
Click to expand...
Click to collapse
Are they included in all the latest ROMS? Any place where I can find them?
Also, I've noticed everyone tell me that my voice is not clear when I use my bluetooth handsfree (I've tried 2-3 of them, with same result). Am I missing something here?
Please guide me, any help is much appreciated. Please check my signature for my current updates.
Thanks in advance.
Please someone make sticky for a while, and ROM cockers please add a link at the first of your threads.
After this problem with Jeff, I think it will be necessary to back up you CID and GSM data using itutils tool I'll attach them with the BAT file for back up and restore
You have nothing to lose except 320 kb in your hard disk, cause these data only can be found on your phone, if you lost then they can't be restored by flashing the original ROM.
Backup.bat you will have 2 file (cid.bin, gsm.bin) save them in your hard disk, you don’t know, you will need them someday
Restore.bat for restoring them
off course connect ActiveSync first, u can connect via blutooth wifi infrered or usb
I have nothing to gain except your phone for yourself
Cheers,
best regards
um... too hard for me to understand hehehe
but Big Thankx anyway
Only one
Hello Chopin , thank's for the advice.
I only obtain 1 file : gsmdata.bin
My prophet is g4 with korand 2.4 ROM.
Regars
sorry wrong file I'll update now
hi,
is this problem happen while applying the hardspl patch or can this happen while flashing a new rom with RUU after hardspl patch ???
i already done the hardSPL and i need it only to do it only once , right?
am i out of danger now?
thx
inteks
just backup your data you have nothing to lose
this happned to Jeff do to high voltage, and it can be happened anytime, even if you already hard SPL
if you have 320kb free space, why you don;t do it?
for safety..
I created my backups..
Thx Chopin..
I have a question..
Is it possible to restore my backups to another same device and it is cloning?
Hi,my device is G4(Via Hard SPL),i click the backup.bat but i did not get gsm.bin and cid.bin.
I flash other ROM.Now i can backup it.Thx.
thanks Chopin,keep sharring you great work with us my friend
Thnx!! backup worked fine for me! Keep up the great work!
Chopin said:
sorry wrong file I'll update now
Click to expand...
Click to collapse
Thank's , with the new file works fine. I hope never must use it.
Regards.
Million Thanks,Chopin.
Thx Chopin, always it's better try to avoid bad experiences
Hey Chopin,
Thanks for the warning. I've backupped my CID and GSM data. I have a G4 device, if i need to restore can i restore it using that bat file? Because i have a G4.
Chopin said:
Please someone make sticky for a while, and ROM cockers please add a link at the first of your threads.
After this problem with Jeff, I think it will be necessary to back up you CID and GSM data using itutils tool I'll attach them with the BAT file for back up and restore
You have nothing to lose except 320 kb in your hard disk, cause these data only can be found on your phone, if you lost then they can't be restored by flashing the original ROM.
Backup.bat you will have 2 file (cid.bin, gsm.bin) save them in your hard disk, you don’t know, you will need them someday
Restore.bat for restoring them
off course connect ActiveSync first, u can connect via blutooth wifi infrered or usb
I have nothing to gain except your phone for yourself
Cheers,
best regards
Click to expand...
Click to collapse
Hi,
Just a quick one.
Everytime I download the ZIp and try to use it I am informed it is corrupt - is this just me (2 seperate machines tried) ??
Regards
Radar
Thanks Chopin Great job
oh... this could be great
thanks
@radar,
download the file, then change the extension from .zip to .rar
You can then access the files
OK, just run it, got a 16kb gsm.bin file, and a 256kb cid.bin file.
I had to run the backup.bat file TWICE, though.
(on a prophet g4, original - for now! - ROM)
newbie need help!
thx for the tool chopin, u r the great, by the way can u give us tutorial on how to backup or restore?
i am running stock rom 2.1 and there is some problem with my bluetooth connectivity. i am able to pair and recieve files from practically all phones but not able to send any files. notification shows "failure reason: connection failure". my phone is rooted. i have also tried bluetooth file manager but its of no use. i am not even able to send files to htc wildfire s and samsung galaxy s. plz help....
jazsaha said:
i am running stock rom 2.1 and there is some problem with my bluetooth connectivity. i am able to pair and recieve files from practically all phones but not able to send any files. notification shows "failure reason: connection failure". my phone is rooted. i have also tried bluetooth file manager but its of no use. i am not even able to send files to htc wildfire s and samsung galaxy s. plz help....
Click to expand...
Click to collapse
if u are rooted then u should not have any problem in sending file.. go for bluetooth file manager from market..!! i had same issue when i was on stock ROM.. make sure u have rooted properly and try bluetooth file transfer then u can send files to all phone's..
faiyyaz said:
if u are rooted then u should not have any problem in sending file.. go for bluetooth file manager from market..!! i had same issue when i was on stock ROM.. make sure u have rooted properly and try bluetooth file transfer then u can send files to all phone's..
Click to expand...
Click to collapse
i know that. thats why i posted it here. theres one app on market(i dont remember the name) that checks rooting and it says my phone is fully rooted.
Hi there,
I am new here and realize I first have to search the forum for the problem i encounter , I did that, could not find the exact problem.
One mentioned slow copying but it was resolved after someone advised him to use a 2.0 usb port.
But that's not the issue in my case
I installed latest paranoid android rom as the second rom in the dualboot option from siyah kernel.
I followed all the instructions to install it correctly.
When i connect phone to pc to copy file the pc hangs, that means, the program which is doing the copying hangs, (both total commander as well as windows file explorer) have to close it with task manager, then when I browse the phone I see the file i tried to copy is present with the original size, but its corrupted, its only size being reserved for the file.
It is not an usb port problem, because when i boot the phone to my first rom (simplistic disaster) i can copy files to the phone, and its fast.
anyone have this problem or know a solution i would be be grateful, because I like the rom, but if I cannot copy files to it it goes down the trunk.
yours sincerely
Ronald
Put out your microsd and connect it directly to pc, works fine? If not it's card issue. Format could help in this case.
Sent from my Sgs2 via Xda Premium. Helped? Click thanks button!
why do i have to retype the title?
socah said:
Put out your microsd and connect it directly to pc, works fine? If not it's card issue. Format could help in this case.
Sent from my Sgs2 via Xda Premium. Helped? Click thanks button!
Click to expand...
Click to collapse
Thanks for your response, I did not try that before allthough im pretty sure its not the solution, because if it were the case i would have the same problem with the other rom booted.
But to not make a fool out of myself i tried it anyway s, and like i anticipated: no problems with the sdcard, the problem also occurs when i copy to the internal sd card, so its most likely some combination of the paranoid android rom with other issues .
Hard to say anything wise... I would try to find answer in rom specific thread. Hope you will solve it. Good luck!
Sent from my Sgs2 via Xda Premium. Helped? Click thanks button!
socah said:
Hard to say anything wise... I would try to find answer in rom specific thread. Hope you will solve it. Good luck!
Sent from my Sgs2 via Xda Premium. Helped? Click thanks button!
Click to expand...
Click to collapse
Yeah, thats where I initially tried to ask the question, but since i am a newbie im am not allowed to post a question in a developper thread till i reach 10 posts , some weird rule
oldevil666 said:
Yeah, thats where I initially tried to ask the question, but since i am a newbie im am not allowed to post a question in a developper thread till i reach 10 posts , some weird rule
Click to expand...
Click to collapse
He said nothing of posting in the thread. He said you should try to find the answer in that thread.
The 10 post rule is there to (hopefully) prevent people from posting random threads in development fora. Doesn't seem to help much though.
Hello
First, excuse for my english. I'm french, and like you know, we are the worst of the world in foreign language (thanks google Trad).
Two, thanks to this ROM, she's great, the best Rom i test since i've my SGII.
So, I'm here because i've a problem (surprised?). When i copy my music Folder (4,5Go), I've a first error message who tell that a sing have a wrong format (MP3). It's not really a problem, because I can ignore it and let the copy continue. But after that, I've a second error message for another file. This time, the message tell me that the phone not respond (sorry, I try to translate Win7, in french: "le périphérique ne répond plus") and i have to stop all the copy or ignore this file. If I ignore, I've the same problem for the following files, and all my folders are empty.
This problem appear with or not the debug mode.
Can you help me? Sorry if the question have been already ask, i've search all this afternoon (I live in Reunion Island, actually it's 5:00pm) and i don't find any answer.
Thanks a lot.
Schmeu
Schmeu said:
Hello
First, excuse for my english. I'm french, and like you know, we are the worst of the world in foreign language (thanks google Trad).
Two, thanks to this ROM, she's great, the best Rom i test since i've my SGII.
So, I'm here because i've a problem (surprised?). When i copy my music Folder (4,5Go), I've a first error message who tell that a sing have a wrong format (MP3). It's not really a problem, because I can ignore it and let the copy continue. But after that, I've a second error message for another file. This time, the message tell me that the phone not respond (sorry, I try to translate Win7, in french: "le périphérique ne répond plus") and i have to stop all the copy or ignore this file. If I ignore, I've the same problem for the following files, and all my folders are empty.
This problem appear with or not the debug mode.
Can you help me? Sorry if the question have been already ask, i've search all this afternoon (I live in Reunion Island, actually it's 5:00pm) and i don't find any answer.
Thanks a lot.
Schmeu
Click to expand...
Click to collapse
The problem you're having is normal at least for now, and I've experienced it many times.
These are my observations and how I've solved the issue in different occasions:
Observations:
- this issue occur randomly
- it's more common if your computer has been hibernated too many times without rebooting
- it's also common if an app on your phone is also trying to access your storage simultaneously.
Solutions:
- stop the copying process, and reconnect your device to the pc.
- reboot your Pc
- copy your files via Wi-Fi using apps - reboot to recovery, connect your phone to your Pc and mount your device as usb (under mount option in recovery) and copy your files.
Note:
-The solutions listed above are not dependent on each other, and one of them will sure get the job done till mass storage mode is fixed in the Rom.
Swyped from my Samsung Galaxy SII
Thanks you very much. I try this tomorrow and i'll tell you if it's works :good:
Schmeu said:
Thanks you very much. I try this tomorrow and i'll tell you if it's works :good:
Click to expand...
Click to collapse
Ok.
Swyped from my Samsung Galaxy SII
Hello,
I try to connect my Gs this morning like you tell me. But it doesn't work.
Firts, i boot my PC after a good night. I re-boot my phone and after that i connect it to my PC.
The same error appear at the begining of the copy.
So, i try to mount my USB storage (i've no Wify to my job so i can't test this solution). The PC detect my phone (it was in the peripheral equipment, but the SD doesn't appear in the explorer.
I'll try to change the kernel, i would like to flash Siyah. If i'm lucky, maybe it will work. Which siyah's version is compatible with PARANOID. I maybe understand there a problem the beta6.
Schmeu said:
Hello,
I try to connect my Gs this morning like you tell me. But it doesn't work.
Firts, i boot my PC after a good night. I re-boot my phone and after that i connect it to my PC.
The same error appear at the begining of the copy.
So, i try to mount my USB storage (i've no Wify to my job so i can't test this solution). The PC detect my phone (it was in the peripheral equipment, but the SD doesn't appear in the explorer.
I'll try to change the kernel, i would like to flash Siyah. If i'm lucky, maybe it will work. Which siyah's version is compatible with PARANOID. I maybe understand there a problem the beta6.
Click to expand...
Click to collapse
Sorry for not clarifying the kernel part.
I use Siyah and mounting usb in recovery works perfectly well.
Siyah 3.5.2 and above are compatible but I always recommend 4.0.1
Swyped from my Samsung Galaxy SII
No problem, thanks you. i'll flash Syiah this week
At home, i try to transfert files with airdroid apk and it works but this soft not allow to transfert several selected files or folders.
Thanks you again for your help.
Hello,
Just to tell you about my problem. With Siyah I could copy all my folders in Recovery mode. I hope the problem will be resolverd with the next PA's version.
Thanks again.
Schmeu said:
Hello,
Just to tell you about my problem. With Siyah I could copy all my folders in Recovery mode. I hope the problem will be resolverd with the next PA's version.
Thanks again.
Click to expand...
Click to collapse
Visit the first link in my signature, let's continue discussions there so as to help others
Swyped from my Samsung Galaxy SII
Jokesy said:
The problem you're having is normal at least for now, and I've experienced it many times.
These are my observations and how I've solved the issue in different occasions:
Observations:
- this issue occur randomly
- it's more common if your computer has been hibernated too many times without rebooting
- it's also common if an app on your phone is also trying to access your storage simultaneously.
Solutions:
- stop the copying process, and reconnect your device to the pc.
- reboot your Pc
- copy your files via Wi-Fi using apps - reboot to recovery, connect your phone to your Pc and mount your device as usb (under mount option in recovery) and copy your files.
Note:
-The solutions listed above are not dependent on each other, and one of them will sure get the job done till mass storage mode is fixed in the Rom.
Swyped from my Samsung Galaxy SII
Click to expand...
Click to collapse
SO i read now its a common problem with the rom , i did not find that information yet, I now using the cynogenmod 9 from july because i was hoping to solve the mass storgage issue and guess what, the same problem, so now i know its not paranoid android related but a cynogen mod issue.
I actually have a new problem since i have a new adsl modem, cyanogen mod does not have a wps option to connect to a wifi router, the modem i have wont connect with any android device the regulary way by typing the wep password wich worked fine with other devices like ps3,TV and a laptop, we have 3 android devices (2x s2 and 1x 10.1 tablet) and all only can connect with the wps option wich unfortunally is missing in cyanogen mod
But I dont see this as a rom problem, only as a missing feature.
Im building my own custom rom for my galaxy ace s5830i using
Android Kitchen v 0.224 with some basic modifications like...
-rooting
-de-odexing
-adding busy box..
etc...
but after flashing, bluetooth and wifi arn't working...
i have tried changing kernels...but the problem exists...
can plzz..anyone tell me....what could be the reason behind it..
pllzz...:crying:
i'll give yu a chocolate....
TT95 said:
Im building my own custom rom for my galaxy ace s5830i using
Android Kitchen v 0.224 with some basic modifications like...
-rooting
-de-odexing
-adding busy box..
etc...
but after flashing, bluetooth and wifi arn't working...
i have tried changing kernels...but the problem exists...
can plzz..anyone tell me....what could be the reason behind it..
pllzz...:crying:
i'll give yu a chocolate....
Click to expand...
Click to collapse
No i don't need Chocolate
Just while switching On wifi & bluetooth take logcat and see there what are the errors.
Hitesh2626 said:
No i don't need Chocolate
Just while switching On wifi & bluetooth take logcat and see there what are the errors.
Click to expand...
Click to collapse
ok..i'll try.......thnxx...
Hitesh2626 said:
No i don't need Chocolate
Just while switching On wifi & bluetooth take logcat and see there what are the errors.
Click to expand...
Click to collapse
i took a logcat for bluetooth..
not for wifi becoz..when i turn on wifi the phone reboots again again....i dont know why..
here is a txt file of logcat...
TT95 said:
i took a logcat for bluetooth..
not for wifi becoz..when i turn on wifi the phone reboots again again....i dont know why..
here is a txt file of logcat...
Click to expand...
Click to collapse
Oh now see go to system/etc/bluetooth/did.conf these did.conf file it is present then replace it if it is not then replace the whole Bluetooth folder because those files having some problem they are not opening at time of trigger so change them.
Also check these file /system/lib/libbluetoothd.so
Hitesh2626 said:
Oh now see go to system/etc/bluetooth/did.conf these did.conf file it is present then replace it if it is not then replace the whole Bluetooth folder because those files having some problem they are not opening at time of trigger so change them.
Also check these file /system/lib/libbluetoothd.so
Click to expand...
Click to collapse
ok..i'll try it....
thxx....once again...