Related
Hi Folks,
I was looking for some piece of information.
I am planning to overclock my GPU on Galxy Note N7000.
Is this possible without a root? I guess not.
Anyways i use some enterprise apps on my phone so once i root i wont be able to use those anymore, My question is once i root or change to some custom rom can i go back to original settings if required?
Also if you can point me some right directions in overclocking GPUs and results, would be nice.
Many Thanks
Hi mate, from what I know, if you can root your gadget and install a nandroid recovery (ex. Clockworkmod a.k.a CWM) you can make a backup of your current system state, By doing that You can safely restore your entire system state (phonecall sms etc) to the time you backup your system using cwm.
I never heard about overclocking a GPU, are you sure GPU? Not CPU.
I recommend you try googling some info before rooting, its better to root your app while still preserve the DRM, so that the enterprise app still functional in root state.
Sent from my E15i using xda premium
---------- Post added at 12:25 AM ---------- Previous post was at 12:21 AM ----------
Yes... you can back to your backup state if you feel that the custom rom is not suitable for you.
Press thanks if it helps
Sent from my E15i using xda premium
tasamono said:
Hi Folks,
I was looking for some piece of information.
I am planning to overclock my GPU on Galxy Note N7000.
Is this possible without a root? I guess not.
Anyways i use some enterprise apps on my phone so once i root i wont be able to use those anymore, My question is once i root or change to some custom rom can i go back to original settings if required?
Also if you can point me some right directions in overclocking GPUs and results, would be nice.
Many Thanks
Click to expand...
Click to collapse
you can root and you unroot it.
back to original setting? use odin
There'll always be traces of a root left behind, though, so don't expect to fool anyone if you're unrooting for that reason.
stepanucs said:
Hi mate, from what I know, if you can root your gadget and install a nandroid recovery (ex. Clockworkmod a.k.a CWM) you can make a backup of your current system state, By doing that You can safely restore your entire system state (phonecall sms etc) to the time you backup your system using cwm.
I never heard about overclocking a GPU, are you sure GPU? Not CPU.
I recommend you try googling some info before rooting, its better to root your app while still preserve the DRM, so that the enterprise app still functional in root state.
Sent from my E15i using xda premium
---------- Post added at 12:25 AM ---------- Previous post was at 12:21 AM ----------
Yes... you can back to your backup state if you feel that the custom rom is not suitable for you.
Press thanks if it helps
Sent from my E15i using xda premium
Click to expand...
Click to collapse
Thanks for the info.
And yes i mean GPU, few games are lagging on my galaxy note, planning to overclock for better performance, hope it works though
You can unroot your phone and set it back entirely, by using an RUU.
Sent from my HTC Desire X using xda premium
Hi everybody!
I start this tread because i have a TECNO T3 phone whit Android 2.3.5 and I need to flash and install custom rom inside...
but the problem is that nowhere i have seen nothing of that phone.
if somebody have any links or some knowing you can quote hier.Sorry for my bad english
have u rooted the phone?
Sent from my TECNO N3 using xda app-developers app
How to root my Tecno T3
please I need to root my tecno t3. I've tried all one click solutions and they didn't work
To gain root access, you have to perform the root method by installing POOT apk and MINISTRO II apk.
Download: Poot Tecno n3
Download: Ministro II library(from Google play store)
To ROOT your TECNO N3 is simple
Just install POOT apk to internal memory and run the apps. it will require you to install MINISTRO II, you'll get -error like "update minstro library", just update through google play store.
Then proceed again to the next step. After installing and updating all the libraries of QT, your phone will automatically reboot(or reboot manually)
You'll get two buttons
1. "press here to poot"
2. "built in root check
Click on the first button to poot and wait till you have 3 buttons
, That means you are now rooted.
You can now complete the process by downloading super user application from the play store
The author would like to thanks the following;
giantpune of androidforums
ken****a of xda developers
Ba-Ka Mnemonic for helping me(tecno n3)
BrainRex
If you have any questions please leave a comment below
where to download
muammil said:
To gain root access, you have to perform the root method by installing POOT apk and MINISTRO II apk.
Download: Poot Tecno n3
Download: Ministro II library(from Google play store)
To ROOT your TECNO N3 is simple
Just install POOT apk to internal memory and run the apps. it will require you to install MINISTRO II, you'll get -error like "update minstro library", just update through google play store.
Then proceed again to the next step. After installing and updating all the libraries of QT, your phone will automatically reboot(or reboot manually)
You'll get two buttons
1. "press here to poot"
2. "built in root check
Click on the first button to poot and wait till you have 3 buttons
, That means you are now rooted.
You can now complete the process by downloading super user application from the play store
The author would like to thanks the following;
giantpune of androidforums
ken****a of xda developers
Ba-Ka Mnemonic for helping me(tecno n3)
BrainRex
If you have any questions please leave a comment below
Click to expand...
Click to collapse
please the download link for poot
please I followed your instructions and it didn't work on my tecno t3. what should I do?
I tried 8 times before it work. So keep trying
---------- Post added at 03:47 PM ---------- Previous post was at 03:39 PM ----------
If phone vibrate n goes blank try this steps.
1- enable usb debuging
2- change location of install app to fone memory.
3- uninstall pook and ministro
4-reboot N3 and reinstall pook and ministro II
5-Make sure you have internet connection so as to update ministro binary
6-restart your N3 after the update
7-unmount sdcard and run pook
8-select the 1st option and wait. if pook display install superuser then u hv sucessfully root your N3.
If phone vibrate n goes blank then remove battery n put it back. power the fone, as soon as it shows instaling sdcard quickly run pook and n press the first option.
will this work for T3 and can i install rom? thanks
Sent from my HTC Desire using xda app-developers app
thanks bro, worked
---------- Post added at 01:09 AM ---------- Previous post was at 12:41 AM ----------
A1deparagon said:
will this work for T3 and can i install rom? thanks
Sent from my HTC Desire using xda app-developers app
Click to expand...
Click to collapse
yes it will. I just did it. I'm also working on a custom rom will be out soon
Ok welcome hopefully soon
Sent from my HTC Desire using xda app-developers app
Please. How. Long will take?
Sent from my HTC Desire using xda app-developers app
---------- Post added at 08:56 PM ---------- Previous post was at 08:49 PM ----------
Please any rom? For technology
Sent from my HTC Desire using xda app-developers app
It will be fun if we can get custom rom for n3
Sent from my TECNO N3 using xda app-developers app
twicenoni said:
It will be fun if we can get custom rom for n3
Sent from my TECNO N3 using xda app-developers app
Click to expand...
Click to collapse
i'm working on it, just need the boot ang recovery.img files.
tecno1 said:
i'm working on it, just need the boot ang recovery.img files.
Click to expand...
Click to collapse
Do you know the site where i can download the Tecno N3 stock firmware and clockworkmod recovery?
Romdump/Nandroid backup
Any body here have Romdump/Nandroid backup of Techno T3? can i have the download link?.....
Thanks...
Rooting tecno t3
tecno1 said:
please I need to root my tecno t3. I've tried all one click solutions and they didn't work[/QP
Please call/text me on 07033315445. for free rooting. i am on whatsapp too.
Leonard
Click to expand...
Click to collapse
techno n7
please i need to install custom rom on my techno n7,please if u av any info on where i can get one...pls kindly post it........and developers,kindly help us tecno users to make custom roms please
where can i get CWM for tecno n7
Sent from my TECNO_N7 using xda app-developers app
Custom Rom Recovery for Tecno N7
maish89 said:
where can i get CWM for tecno n7
Sent from my TECNO_N7 using xda app-developers app
Click to expand...
Click to collapse
Go here
http://forum.xda-developers.com/showpost.php?p=44660171&postcount=417&nocache=1
Tecno T3 Rom
Hi.
I've bricked my Tecno T3. I'm searching for a rom compatible to repair it! i went to the nairaland blogpost on unbricking solutions... But the rom i tryed make my touchpad not work. (N3 custom Rom). So need a T3 rom / backup....
Plz
hi guys I'm new to android. and thinking to root my Samsung galaxy y 2.3.6. so when I'm searching over internet there are so many update.zip files, then where can I find reliable one that is 100% compatible for sgy. does every update.zip file differs from other?
and what are the precautions to avoid bricking?
does one click method works fine?
I don't like to have any custom Rom but just simply want to root my phone.
Hi
Use the method which says that it is for galaxy y
Why don't tou search in galaxy y forums
Wait I'm giving links
Sent from my HTC Explorer using xda app-developers app
---------- Post added at 05:58 PM ---------- Previous post was at 05:50 PM ----------
Put this zip to root of sd card
Take out battery then put it back after 5 seconds
Press volume up and home and power
Navigate by volume keys to update and select the file you pit in your sd
http://d-h.st/qxn
Sent from my HTC Explorer using xda app-developers app
U can use any of the zip files u see..just make sure it is a complete download..
** rooting is new for me,
nd i am a noob to root....**
Use super one click
Sent from my MTS-SP101 using xda premium
:laugh:This Thread is Dedicated to Galaxy Star Duos Lovers :laugh:
<<<<<< ROOT, CWM, ROM, THEME >>>>>>
Press Thanks Button!!!!!
Waiting For Feeeeedback!!!!!!!!!!!!
Disclaimer: Rooting Galaxy Star is risky by way of loss of warranty post rooting and also the small risk of data loss or phone damage. You should be aware of such risks which are quite common with rooting. Kindly note that, you must take up this procedure at your own risk. We shall not be responsible for anything that may go wrong with your handset.
Download The Package
Mirror Download Package
Instructions:
>Unzip Downloaded Package "5282 JASDROID-STOCK-RECOVERY-FIXED.zip" to your PC
>Download "Update super user.zip" and copy to your memory card.
>Switch Off Mobile & Go to Download Mode in your phone by (Vol-down+Home+Power)
> Open Odin application
> Connect the phone to PC and ensure it is properly connected.
> Click on "PDA"
> Select "recovery.tar.md5"
> Click start
Wait for a movement, phone will reboot
> Switch off phone again
>Now go to recovery by (Vol-Up+Home+Power)
>Install update from sdcard
>Select Superuser.zip file
>reboot your phone!
Your Phone Should be ROOOOOT Now!!
Best of Luck :good:
Reserve 1
Reserve 1
Reserve 2
Reserve 2
downloading...will test and give results soon
Wat hppnd bro.....
Sent from my GT-S5282 using xda premium
---------- Post added at 12:02 AM ---------- Previous post was at 12:00 AM ----------
Will try it tomorrow.......thnx in advance
Sent from my GT-S5282 using xda premium
---------- Post added at 12:33 AM ---------- Previous post was at 12:02 AM ----------
Whr ru bro...
Sent from my GT-S5282 using xda premium
I can't get a complete flash....Odin freezes before the flash process can complete.
Sent from my GT-S7562 using xda premium
androsamace said:
:laugh:This Thread is Dedicated to Galaxy Star Duos Lovers :laugh:
<<<<<< ROOT, CWM, ROM, THEME >>>>>>
Press Thanks Button!!!!!
Waiting For Feeeeedback!!!!!!!!!!!!
Disclaimer: Rooting Galaxy Star is risky by way of loss of warranty post rooting and also the small risk of data loss or phone damage. You should be aware of such risks which are quite common with rooting. Kindly note that, you must take up this procedure at your own risk. We shall not be responsible for anything that may go wrong with your handset.
Download The Package
Mirror Download Package
Instructions:
>Unzip Downloaded Package "5282 JASDROID-STOCK-RECOVERY-FIXED.zip" to your PC
>Download "Update super user.zip" and copy to your memory card.
>Switch Off Mobile & Go to Download Mode in your phone by (Vol-down+Home+Power)
> Open Odin application
> Connect the phone to PC and ensure it is properly connected.
> Click on "PDA"
> Select "recovery.tar.md5"
> Click start
Wait for a movement, phone will reboot
> Switch off phone again
>Now go to recovery by (Vol-Up+Home+Power)
>Install update from sdcard
>Select Superuser.zip file
>reboot your phone!
Your Phone Should be ROOOOOT Now!!
Best of Luck :good:
Click to expand...
Click to collapse
Working??
Sent from my GT-S5282 using xda app-developers app
Is thr anything wrong wid ur systm?
Sent from my GT-S5282 using xda premium
---------- Post added at 07:37 AM ---------- Previous post was at 06:57 AM ----------
@androsamac bro plz fix the issues with recovery. .....
Sent from my GT-S5282 using xda premium
Hi there..
Nope it doesn't ring a bell..
E:Sginature verification failed .
Wats wrong with stock recovery?.
Hmmm
Sent from my GT-S5282 using xda premium
---------- Post added at 08:38 AM ---------- Previous post was at 08:38 AM ----------
So wTs nw??
Sent from my GT-S5282 using xda premium
Chirtagh said:
Nope it doesn't ring a bell..
E:Sginature verification failed .
Wats wrong with stock recovery?.
Click to expand...
Click to collapse
Give me some time , I will fix that very soon..
Sent from my GT-I9300 using xda app-developers app
who is online guys.................
i have built cwm, need testers .........
Download 5282CWM
test and feedback fast...........
androsamace said:
who is online guys.................
i have built cwm, need testers .........
Download 5282CWM
test and feedback fast...........
Click to expand...
Click to collapse
hey dude i have flashed the cwm through odin...but i don know how to get into recovery...3 button combo doesnt work....also i don have adb installed in my latop....but odin flash is succesful...
Hi there..
androsamace said:
who is online guys.................
i have built cwm, need testers .........
Download 5282CWM
test and feedback fast...........
Click to expand...
Click to collapse
no bro not workng..
i think it only works by key combination..
recovery&download mode
--------------------------------------------------------------------------------
Hello my fellow S5282 users...kindly find attached confirmed methods to enter recevery and download mode on samsung galaxy star S5282(confirmed)
sambathpkr said:
hey dude i have flashed the cwm through odin...but i don know how to get into recovery...3 button combo doesnt work....also i don have adb installed in my latop....but odin flash is succesful...
Click to expand...
Click to collapse
sorry bro its not working...after flashing cwm the recovery remains unchanged.....
---------- Post added at 08:35 PM ---------- Previous post was at 08:27 PM ----------
mytborne said:
--------------------------------------------------------------------------------
Hello my fellow S5282 users...kindly find attached confirmed methods to enter recevery and download mode on samsung galaxy star S5282(confirmed)
Click to expand...
Click to collapse
hello mytbone the 3 button combo works in some device(s5282)and doesnt in some devices(s5282)...because of the baseband only this problem occurs...if u r using the updated firmware the the 3 button combo works...if u r using the older firmware then the 3 button combo may or may not work...
sambathpkr said:
sorry bro its not working...after flashing cwm the recovery remains unchanged.....
---------- Post added at 08:35 PM ---------- Previous post was at 08:27 PM ----------
hello mytbone the 3 button combo works in some device(s5282)and doesnt in some devices(s5282)...because of the baseband only this problem occurs...if u r using the updated firmware the the 3 button combo works...if u r using the older firmware then the 3 button combo may or may not work...
Click to expand...
Click to collapse
Tell your exact firmware details.....
Sent from my GT-I9300 using xda app-developers app
sambathpkr said:
sorry bro its not working...after flashing cwm the recovery remains unchanged.....
---------- Post added at 08:35 PM ---------- Previous post was at 08:27 PM ----------
hello mytbone the 3 button combo works in some device(s5282)and doesnt in some devices(s5282)...because of the baseband only this problem occurs...if u r using the updated firmware the the 3 button combo works...if u r using the older firmware then the 3 button combo may or may not work...
Click to expand...
Click to collapse
that explanation makes the problem easier to be solved...you may then try flashing the latest firmware before applying the cwm update. i use
Baseband: S5282DDAME2
Build number: JZO54K.S5282XXAMEA
I hope that might help you.
mytborne said:
that explanation makes the problem easier to be solved...you may then try flashing the latest firmware before applying the cwm update. i use
Baseband: S5282DDAME2
Build number: JZO54K.S5282XXAMEA
I hope that might help you.
Click to expand...
Click to collapse
Mine Baseband is S5282DDAMGI
Build No: JZO54K.S5282XXAMGI
3 button does not work
androsamace said:
Tell your exact firmware details.....
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
BASEBAND: DDAMD2
FIRMWARE VERSION:JZ054k.s5282XXAME4
---------- Post added at 09:06 PM ---------- Previous post was at 08:57 PM ----------
mytborne said:
that explanation makes the problem easier to be solved...you may then try flashing the latest firmware before applying the cwm update. i use
Baseband: S5282DDAME2
Build number: JZO54K.S5282XXAM
I hope that might help you.
Click to expand...
Click to collapse
i have only 2G connection....
so downloading 500mb file from hotfile.com without interruption is nearly impossible for me..
sorry for the incovenience...
i recently bought this unit and satisfied with it..., but yesterdat after copying some music from my PC i notice it became laggy..
after a minute it rebooted and got stock in boot logo.., can anybody help me with this
sad
so no one can help me with my Problem..., how sad
luvmyXray said:
so no one can help me with my Problem..., how sad
Click to expand...
Click to collapse
try to remove the dalvik chache over the custom recovery.
if you dont have a custom recovery, try to boot into the "Recovery Mode"... press at the start the volume button.
Can you help me install cwm for this model?
Sent from my CROSS A28 using xda app-developers app
---------- Post added at 12:14 PM ---------- Previous post was at 12:09 PM ----------
luvmyXray said:
so no one can help me with my Problem..., how sad
Click to expand...
Click to collapse
on huawei website, I saw some roms or firmware (sorry I can't remember exactly). I have a question. Please help me. Can I install these roms or firmwares by stock recovery of huawei mediapad youth 7 s7-701u. I have just bought it and I don't have any knowleadges about it
Sent from my CROSS A28 using xda app-developers app
Download the firmware specific to your model S7-701U.
Exrtact it and read the pdf file instruction on how to install it in your tablet.
hoangchau113 said:
Can you help me install cwm for this model?
Sent from my CROSS A28 using xda app-developers app
---------- Post added at 12:14 PM ---------- Previous post was at 12:09 PM ----------
on huawei website, I saw some roms or firmware (sorry I can't remember exactly). I have a question. Please help me. Can I install these roms or firmwares by stock recovery of huawei mediapad youth 7 s7-701u. I have just bought it and I don't have any knowleadges about it
Sent from my CROSS A28 using xda app-developers app
Click to expand...
Click to collapse
try this.
1. Press and hold the power button + volume up + volume down.
2. When you feel the vibration,release the power button.
3. When the Android logo appears, release the volume up.
4. You will see some running lines in the Android logo, hold still the volume down and wait for 10 seconds then release it.
5. Then let it reboot by itself.
6. Hard reseting done.