i flash amss.mbn and osbl.mbn not dsp1.mbn by mistake
and reboot ,thin streak dont want to work again,
i Search in google and i did not see any one have this problem,
i dont have problme with qdl tool,
my problom is my streak is off and dasint want to turn on ,and i try it in dffrint pc and loptop,
loptop Does not recognize streak,
if you have anythin like mose usb and you bot it in usb the loptop recognize it,
it was recognize streak befor even if it off ,
bout now its not
any help friends
kkof94 said:
i flash amss.mbn and osbl.mbn not dsp1.mbn by mistake
and reboot ,thin streak dont want to work again,
i Search in google and i did not see any one have this problem,
i dont have problme with qdl tool,
my problom is my streak is off and dasint want to turn on ,and i try it in dffrint pc and loptop,
loptop Does not recognize streak,
if you have anythin like mose usb and you bot it in usb the loptop recognize it,
it was recognize streak befor even if it off ,
bout now its not
Click to expand...
Click to collapse
Try different driver. Can your device go into bootloader
Accidentally sent from my Google Nexus S using XDA Premium
thank you melvinchng
i cant go to bootloader.
my streak is off and dasnt want to turn on,
the battrey is full,i try it in my friend mobile.
pc Does not recognize streak
Related
Hey guys
I have the problem that my x10 mini pro has stuck in xrecovery while flashing a rom and now ich can't flash it anymore because no pc recognices it
Seus and binarys flash tool don't see my phone so I can not flash it
but I can enter flash mode
please help
in seus start support zone click repair and go further till it shows up that you need turn off your phone and pluging usb with pressed back button.
but my pc and others don't recognice my x10 mini pro...
so seus does not see it
just try those steps first :
1.unlug your phone from pc and turn phone off
2.start seus selsct support zone, click repair phone select continue then next
3.your pc will start prepaering for update
4.select mini pro from list
5.conect usb to pc and then press and hold back buton and conect usb onto phone
6.then it must start dowloading update and repair phone
if still dosent work reinstall phone drivers on your pc and try again.
There is no support zone anywere -.-
drivers are installed correct casuse I flashed it before with no probs
do you have this?
Edit: sory my bad install Sony Ericsson PC Companion from oficial site if you dont have it
I have found it but it still does not work
my pc does net see my phone I don't even hear the sound that it is plugged in to my pc
that is my problem pc companion and seus and binarys flasher don't see it...
is there a other way to flash it?
or is there a thing like the usb brick thing like the galaxy s ?
repeat those steps above with Sony Ericsson PC Companion.it need to work.if still not then are te drivers on pc messed up beacuse this is the only way to fix phone.or try flash tool.
for any other ways i dont know i havent got that kind of problem.
I have tried it several times but every time the same result...
my pc does not se my phone (no sound that it is plugged in)
so I can not flash it anymore...
now I have a full Brick -.-
you cant brick your phone so muct that you cant fix it.
if your pc doesnt recognize your phone then is problem on your pc not phone.
so just for try reinstall your drivers and then you will se
EDIT: can you go into xrecovery and use it?
I have tried it on several pc's and I installed my drivers to flash it correct...
I had done this before and it worked
my pc's havent changed since then...
but after I flashed slades froyo once again (had random reboots, made wipe and tried to install again) it stuck while flashing in xrecovery and the only thing I could do is to put the battery out...
And now it won't be seen by any pc...
and not form seus, pc companion, and binarys flash tool...
then i dont know what is going on with your phone beacuse no one had this kind of problem.
can turn on your phone is there any sing if it's working?
I can turn it on and it repeats booting...
classic bootloop but nothing else no xrec and not even charging -.-
and it is not seen by any pc -.-
well your phone is still working this is good sing.
pc will not recignized your phone when is on boot.
but is strange why is not recognized in flash mode.
maybe you could try with hard reset and then it could be recognized.
hard reset is on the right site of camera over sim try with that
can you post a picture of that?
and are you sure that this is a reset button?
well some one on forum mentioned that.
hmm I tried it but nothing happened -.-
an it does not feel like a kind of button...
guess I need to send it back to se...
and wait 3 weeks till i get it back
USB maybe
Sent from my U20i using XDA App
yes it is the usb
but i don't have a clue how to fix it
there is nothing broken but it doesnt work no more
I'm helping my friend here
He did a full wipe on his X10, and now, his phone cannot boot, and neither can it enter recovery. My Mac can't even detect it(adb and fastboot cannot detect it).
Help :/
tlkh said:
I'm helping my friend here
He did a full wipe on his X10, and now, his phone cannot boot, and neither can it enter recovery. My Mac can't even detect it(adb and fastboot cannot detect it).
Help :/
Click to expand...
Click to collapse
Repair it using PCCompanion
Adding to that, you may also find it easier to do it on a windows-based pc.
This is caused by did the full wipe and then reboot the phone. At this time, there is no system files in the phone so it won't boot. Need to repair using PC Companion or SEUS or Flash Tool.
Sent from Xperia X10 Self-modded
Hi,I am this friend who cleverly full wiped with xRecovery.However, my windows7 computer still cant detect my phone,and proves to be a problem.Anyone can help me by giving me a step by step in getting my phone back into flashable mode? or help fix this?
Same kind of problem here with a friend's phone I usualy use a htc desire.
He updated hi X10i (stock, not rooted), since then there's no boot, only exclamation mark for a few secs, and no usb.
I tried "<="+usb/power on -> exclamation mark, no recovery.
It's not detected in any way by my pc (installed sony tools etc...), windows or linux (no kernel message at all), same usb port, same cable, my htc phone works in both.
What can I do ?
Thanks !
You have to connect the phone in flashmode...
Use the link "How to use PC Companion" in my signature
I had the same problem a while ago. Phone not detected by PCC/flashtool, SEUS, no xrecovery... started to panic
Then i read a post here somewhere about wotansever - its free but you gotta sign up.
http://www.wotanserver.com/en/
It detected my phone where all others failed and flashed it back to stock rom.
Try it - it works
Once you get it working again heres a great guide for flashtool (flashing/rooting/BL unlocking)
http://forum.xda-developers.com/showthread.php?t=928343
mugsy730 said:
I had the same problem a while ago. Phone not detected by PCC/flashtool, SEUS, no xrecovery... started to panic
Then i read a post here somewhere about wotansever - its free but you gotta sign up.
http://www.wotanserver.com/en/
It detected my phone where all others failed and flashed it back to stock rom.
Try it - it works
Once you get it working again heres a great guide for flashtool (flashing/rooting/BL unlocking)
http://forum.xda-developers.com/showthread.php?t=928343
Click to expand...
Click to collapse
Thank you, i read a little about this but i'm affraid my problem is "before" any software since my phone is not detected by my system, neither running windows 7 nor linux.
It does not turn on when pushing "<-" and pluging usb.
9andar said:
You have to connect the phone in flashmode...
Use the link "How to use PC Companion" in my signature
Click to expand...
Click to collapse
hey i tried to installed the rom you are currently using and i have my bootloader locked and when i was promted to setup the installation the touch on my phone was not responding and it seems that i just clicked on next and also appears that because of that my phone not is just stuck at logo, hope you can give a tip on how to instal this rom
hello guys,i have a problem here,and i can't figure out how to fix it..the problem is,i can't connect my phone to my laptop with flash mode,everytime i connect there's a pop up shown "SEMC flash device" and then my laptop is freezing,so i have to force shut down it..i did search on google and here on XDA forums,but none are works,my laptop are still freezing everytime i connect the phone into the flash mode,i did what they told,like cleaning system with ccleaner,reboot into safe mode and try to connect into the flash mode,but still not working...
this is what i do :
1. clean with CCleaner
2. reboot laptop into the safe mode
3. when windows are on,i turn off my phone,then connect it to my laptop with flash mode
4. pop up "SEMC flash device" shown
5. laptop stuck
did i make any wrong step there?
as you can see on my third step,i just connect the phone with the flash mode (hold turn down volume button and connect the USB) do i need to run any programs to install the SEMC flash device?
is there's a way i can install the SEMC flash device without connect my phone?because i tried many usb_flash driver exe files i found,but none are works..
or maybe a repair for windows to fix it?
FYI I'm running on acer laptop,with windows xp sp 3,and i've tried on my brother's laptop with windows 7,but still the same,PC companion,ggsetup,ADB driver is installed correctly i think,since i can root my phone,and put some tweaks..
anyone can help me?please?
I can't access flashtool or SEUS,and that's not good..
I'm so sorry if this post is a wrong section,admin can move it anytime,i just don't know where to find the answer,or where to ask this..
thank you and sorry for my bad english..
Why the hell are you booting into safemode on the laptop?
dumraden said:
Why the hell are you booting into safemode on the laptop?
Click to expand...
Click to collapse
that's what I do after with the normal mode fail,and because on many sites i found about this problem said so,they said if i keep freezing on the normal mode,then i should go to the safe mode and try again..
but they did it,and I didn't,mine are keep freezing,no matter what mode is
nevermind,,i just upgrade to windows 7 and it works well now..you can close this useless thread now sir,,
Hello.
I have a motorola atrix 4g AT&T Gingerbread 2.3.6.
Yesterday a received a new notification about a new upgrade. so i acepted.
then the phone turned off and i received this message.
failed to boot 1
When i push vol+ and power i read this
failed to boot 1
PwrReason: Usb_cable
Starting Fastboot Protocol.
when i push vol- and power i can read starting NVflash but the phone turn off after 1 second.
if i connect the phone to my pc, it don´t recognise.
Any help???
Cheers from Colombia. :good:
Your phone is hard bricked. Only warranty service from Motorola will solve it.
saiftheboss7 said:
Your phone is hard bricked. Only warranty service from Motorola will solve it.
Click to expand...
Click to collapse
I would try 236 sbf first rsd.first maybe install did not take seen that in mine before.
Is your phone unlocked?
thanks
diegotalla said:
Is your phone unlocked?
Click to expand...
Click to collapse
Hello.
My phone isn´t unlocked. :crying:
Povelio said:
Hello.
My phone isn´t unlocked. :crying:
Click to expand...
Click to collapse
try pressing Vol+ and power. If it says "starting RDS protocol" you are not so unlucky. Connect the phone (in RDS mode) to the pc and start the windows application called RDS Lite v5.6 or 5.7 (I tested these). Then your phone will be recognised by RDS Lite and you'll be able to flash a full sbf (full image of the complete system - like a factory reset). You can find your correct sbf from here: http://www.das8nt.com/sbffiles.html
hope to help
thanks
Thanks alberto88a
I can´t go into RSD only flashboot protocol support.
That´s very werid cause was an "official update"
I´m thinking in run a virtual machine with ubuntu and try to plug it. Then try to run a fruitcake :cyclops:
R: Failed to boot 1. Please help me!
Povelio said:
Thanks alberto88a
I can´t go into RSD only flashboot protocol support.
That´s very werid cause was an "official update"
I´m thinking in run a virtual machine with ubuntu and try to plug it. Then try to run a fruitcake :cyclops:
Click to expand...
Click to collapse
I used fastboot under windows...search for fastboot.exe and run it from a terminal ms-dos..
Sent from my MB860 using xda premium
alberto88a said:
I used fastboot under windows...search for fastboot.exe and run it from a terminal ms-dos..
Sent from my MB860 using xda premium
Click to expand...
Click to collapse
when i do that the ms-dos said "waiting for the device" i installed all the drivers and i run it on win 7, win 8 and win xp. Thats i´m trying with ubuntu no drivers need for mount a device.
I´m very bored without an smartphone lol
Your phone is not hardbricked. Rsd recognise your device you will flash with the same firmware you have after the problem. If that not resollve your problem you need to flash the unlock sbf via rsd. Again using rsd lite flash the sbf original you have after the failed to bot 1. If the failed to boot 1 still there you need to flash via rsd the unlock sbf.
R: Failed to boot 1. Please help me!
Povelio said:
when i do that the ms-dos said "waiting for the device" i installed all the drivers and i run it on win 7, win 8 and win xp. Thats i´m trying with ubuntu no drivers need for mount a device.
I´m very bored without an smartphone lol
Click to expand...
Click to collapse
Are you sure the device is connected in fastboot mode? Try fastboot devices before other operations...anyway if the phone goes into fastboot mode you are safe! It's just a driver problem! Keep me updated
Sent from my MB860 using xda premium
Thanks
diegotalla said:
Your phone is not hardbricked. Rsd recognise your device you will flash with the same firmware you have after the problem. If that not resollve your problem you need to flash the unlock sbf via rsd. Again using rsd lite flash the sbf original you have after the failed to bot 1. If the failed to boot 1 still there you need to flash via rsd the unlock sbf.
Click to expand...
Click to collapse
Thanks diego. My pc can\t recognize the phone, thats the problem and i dowloaded the drives from motorola.:crying:
thanks
alberto88a said:
Are you sure the device is connected in fastboot mode? Try fastboot devices before other operations...anyway if the phone goes into fastboot mode you are safe! It's just a driver problem! Keep me updated
Sent from my MB860 using xda premium
Click to expand...
Click to collapse
i only have 1 option "starting fastboot protocol support" i downloaded a million of drivers but nothing work. :crying: :crying:
Povelio said:
i only have 1 option "starting fastboot protocol support" i downloaded a million of drivers but nothing work. :crying: :crying:
Click to expand...
Click to collapse
try these drivers: http://dottech.org/downloads/MotoHelper_2.1.32_Driver_5.4.0.exe
then if you succeed try moto-fastboot http://forum.xda-developers.com/showthread.php?t=1138092
thanks
alberto88a said:
try these drivers: http://dottech.org/downloads/MotoHelper_2.1.32_Driver_5.4.0.exe
then if you succeed try moto-fastboot http://forum.xda-developers.com/showthread.php?t=1138092
Click to expand...
Click to collapse
Thanks alberto88a. Infortunatly the pc don´t recongnized. In a couple of hours i´ll try on win 8 whit this driver. I really aprecciated your help.:highfive:
R: Failed to boot 1. Please help me!
Povelio said:
Thanks alberto88a. Infortunatly the pc don´t recongnized. In a couple of hours i´ll try on win 8 whit this driver. I really aprecciated your help.:highfive:
Click to expand...
Click to collapse
Try an other pc or maybe an other usb port...don't you hear any sound while connecting? If yes your phone is at least seen by the pc and you can try to install missing drivers from control panel
Sent from my MB860 using xda premium
thanks
alberto88a said:
Try an other pc or maybe an other usb port...don't you hear any sound while connecting? If yes your phone is at least seen by the pc and you can try to install missing drivers from control panel
Sent from my MB860 using xda premium
Click to expand...
Click to collapse
Only on Win xp i got the sound. (in then out sound). It´s a very weird situation cause i downloaded the latest drivers
Povelio said:
Only on Win xp i got the sound. (in then out sound). It´s a very weird situation cause i downloaded the latest drivers
Click to expand...
Click to collapse
maybe you need to search your device and install drivers manually from control panel and "hardware". I think it's only this driver problem that keep you from flashing a full rom...
thanks
alberto88a said:
maybe you need to search your device and install drivers manually from control panel and "hardware". I think it's only this driver problem that keep you from flashing a full rom...
Click to expand...
Click to collapse
Well i think the usb port is damaged, i used 6 differents pc without results:crying:
Thanks To All
Thanks to all guys for the help, finally i change the phone for a motorola photon, a guy said that he can make a special cable to repair. So moderator you can close this. THANKS TO ALL FROM CALI-COLOMBIA.:good::good::highfive:
Well as all the other cases i have also in my hands a Dell Streak 5 which got stuck on the logo screen and i have been fighting for weeks to recover it without any success. My father tried to update it to the latest version and he messed up with everything.. Unfortunately, i dont know the exact steps he took as he can not remember.
First of all i will describe my current situation and i will describe all the steps that i have taken until now..
1. Dell recovery can not be accessed by pressing (Volume +,Volume - and On/Off)
2. Dell fastboot can not be accessed by pressing (On/Off Camera button)
3. Dell download mode works fine by pressing (Volume + when connecting device with usb.)
4. The Qualcom drivers are successfully installed.
5. Dell successfully passes streakflash.
6. Dell fails in the end of the QDL tool with error
Wait for ADB device" error [D2]:wait ADB fastboot mode timeout! (black screen on Streak)
Click to expand...
Click to collapse
What i have done so far to resolve my issue.
I have followed this quide and numerous others that are alterations of the below guide.
Firstly after the download, you have to get the drivers (guess the problem is only with Win7 64 bit OS) in place.
The same link above has the links on tutorials to install QDL tool drivers for Qualcomm HS-USB Diagnostics 9002.
After this...
1) Run streakflash version from the streakflash.zip(after extraction though).
2) Boot into diagnostic mode (Vol Up + Power button) and connect the USB cable to the computer. 'Qualcomm HS-USB Diagnostics 9002' will show in the port field in streakflash QDL tool.
3) Hit the run button. The process should stop at success.
4) Disconnect USB cable and close streakflash QDL tool.
5) Now run the QDL tool that came in repairtool.zip (after extraction though).
6) Boot the Streak into diagnostic mode (Vol Up + Power button) and connect the USB cable to the computer. 'Qualcomm HS-USB Diagnostics 9002' will show in the port field in QDL tool.
7) Hit the run button. The process should stop at success. If not, dont forget try again and again. Make sure you change USB ports (to which you are connecting ur streak) on ur system too.
Click to expand...
Click to collapse
I have tried all the fastboot drivers that are provided by Dell from their website and the drivers that come with repair tool and streakflash. My issue here is that although i installed the drivers in the computer i dont have a way to match the drivers with my Dell as long as it is not possible to enter in fastboot mode. The only thing i did is to plug in my HTC Desire and when it asks for the driver i provided the drivers for the Dell in order to be able to find them later. I dont know if this is even possible but i tried it. Another thing i did is to add legacy hardware in the windows devices and i added the Android Adb Interface, Android Bootloadern Android Composite ADB interface but this did not work as well..
Last but not least i tried 2 different ports of my laptop. The first one stucks at Run Hex Success and the second arrives to the point i described previously. The operating system is OSX and i am running Windows 7 32bit in a virtual host and i tried the same in a normal Windows 7 installation. Both give the same results.
Finally i tried 2 different internal sd cards, the 1st one is the one coming from dell(2GB) and the second one is a 4GB that it was being used as external. Both gave me the same errors.
I have search in all the XDA forum, modaco, pocketables but i did not encounter a similar situation.
Please, if anyone has any clue what could be wrong and i can not overcome the above error please share with me.
Best Regards
Same problem
I have the same problem. The phone just won`t go in fastboot mode after streakflash, it`s just the same. I try to find another version of streakflash qdl but i can`t find it.
QDL won`t work because the phone won`t go in fastboot (wait for adb- error), so i think the problem is streakflash.
Maybe someone can help us:crying:
kotsos.marga said:
Well as all the other cases i have also in my hands a Dell Streak 5 which got stuck on the logo screen and i have been fighting for weeks to recover it without any success. My father tried to update it to the latest version and he messed up with everything.. Unfortunately, i dont know the exact steps he took as he can not remember.
First of all i will describe my current situation and i will describe all the steps that i have taken until now..
1. Dell recovery can not be accessed by pressing (Volume +,Volume - and On/Off)
2. Dell fastboot can not be accessed by pressing (On/Off Camera button)
3. Dell download mode works fine by pressing (Volume + when connecting device with usb.)
4. The Qualcom drivers are successfully installed.
5. Dell successfully passes streakflash.
6. Dell fails in the end of the QDL tool with error
What i have done so far to resolve my issue.
I have followed this quide and numerous others that are alterations of the below guide.
I have tried all the fastboot drivers that are provided by Dell from their website and the drivers that come with repair tool and streakflash. My issue here is that although i installed the drivers in the computer i dont have a way to match the drivers with my Dell as long as it is not possible to enter in fastboot mode. The only thing i did is to plug in my HTC Desire and when it asks for the driver i provided the drivers for the Dell in order to be able to find them later. I dont know if this is even possible but i tried it. Another thing i did is to add legacy hardware in the windows devices and i added the Android Adb Interface, Android Bootloadern Android Composite ADB interface but this did not work as well..
Last but not least i tried 2 different ports of my laptop. The first one stucks at Run Hex Success and the second arrives to the point i described previously. The operating system is OSX and i am running Windows 7 32bit in a virtual host and i tried the same in a normal Windows 7 installation. Both give the same results.
Finally i tried 2 different internal sd cards, the 1st one is the one coming from dell(2GB) and the second one is a 4GB that it was being used as external. Both gave me the same errors.
I have search in all the XDA forum, modaco, pocketables but i did not encounter a similar situation.
Please, if anyone has any clue what could be wrong and i can not overcome the above error please share with me.
Best Regards
Click to expand...
Click to collapse
http://srinicame.blogspot.in/2012/09/unbricking-dell-streak-5.html
some sparks flew with this
im not sure whether it works or not but it is definetly worth a try
RE
I try that too, the streakdroid page is offlline. i still think that the problem is streakflash 2.7.4.5 , because it run perfectly, but nothing changes, i cannot run into fastboot.
emyl_is said:
I try that too, the streakdroid page is offlline. i still think that the problem is streakflash 2.7.4.5 , because it run perfectly, but nothing changes, i cannot run into fastboot.
Click to expand...
Click to collapse
Same issue since months. No fastboot on my streak. Tried QDL, nothing. anyone has the QDL repair tool?
---------- Post added at 10:38 AM ---------- Previous post was at 10:01 AM ----------
I have finally found a working QDl repair tool.
This should help most of us
http://forum.xda-developers.com/showthread.php?t=2343463
Good luck
I'm amazed how many people still try to root the Streak using one-click root tools. They're not recommended, mainly because of the results shown in this thread. They're also unnecessary, as the Streak is arguably the easiest device to root so long as you immediately boot into the recovery after installing it.
repairtool.zip - 185.25 MB
This may be what you're looking for.