Here is my problem,
If I put the phone on "automatic" it will stay on gprs/edge but i will have good cell signal. If I put it on WCDMA then i get 3g /hsdpa
Normally in my area I get 3g on an iphone with no problem. But with the galaxy s2, it doesn't show up unless i select wcdma.
Why is that? and what could be wrong? Why doesnt it auto switch away from edge to hsdpa/3g ?
I'm using Ki4 modem
I had the same issue before I moved to 2.3.5
Also, try with disabling fast dormancy(*#9900#) and see if that makes a difference for you.
Thanks,
Vishal
Related
I have T-Mobile version of this phone but I use it with Mobilicity.
Any time I go into a place that has no reception I obviously lose signal and both the bars and the 3G icon disappear.
However, when I leave that area and come back to the area where I had reception, the 3G icon never comes back. When I attempt to make a call I a get a message saying "not registered on network". If i go to wireless settings and try to manually search for a provider, the phone will only find Roaming.
The only thing that solves the problem is rebooting the phone.
I have Bionix 1.9 rom but this issue happened on stock as well. It also happens to another guy that has Vibrant9 rom.
On the other hand, other phones like the old samsung galaxy doesn't have that issue.
Any ideas. Am I missing some settings option?
Thanks...
I can only tell you I have exactly the same problem. Using it with Mobilicity.
Let's hope someone will come up with a fix.
A guess is that it has to do with the order in which it is searching to network operators after it loses signal. I am not sure how the phone is hard coded, but it is possible that upon reboot, it checks the SIM for which network to lock on to, but without a reboot it is looking for T-Mobile, because that is hard coded into the phone.
This is all a guess, but perhaps setting it to Manual network selection instead of automatic would help lock it on your network.
^yes, I think if you take it off the auto setting in your mobile network, that may solve the problem. Even though I'm with TMO we had a 3g outage and while it was on auto the same message came up for me, even after the outage was over. Set it to wcdma only, and I was able to make calls and get back on the network.
Setting it to Manual will just force us to do it manually every time it gets disconnected.
Not a solution, unfortunately.
Thanks guys,
Is there an application perhaps that will search for available networks and register on the network of your choosing once found?
Orochi77 said:
I have T-Mobile version of this phone but I use it with Mobilicity.
Any time I go into a place that has no reception I obviously lose signal and both the bars and the 3G icon disappear.
However, when I leave that area and come back to the area where I had reception, the 3G icon never comes back. When I attempt to make a call I a get a message saying "not registered on network". If i go to wireless settings and try to manually search for a provider, the phone will only find Roaming.
The only thing that solves the problem is rebooting the phone.
I have Bionix 1.9 rom but this issue happened on stock as well. It also happens to another guy that has Vibrant9 rom.
On the other hand, other phones like the old samsung galaxy doesn't have that issue.
Any ideas. Am I missing some settings option?
Thanks...
Click to expand...
Click to collapse
Where you able to find a solution to this problem? I'm having the same problem. Let me know. Thanks.
+1111111.... i meant plus 1... but yeah ...i'm having the same problem... Vibrant on Mobilicity w/ Froyo Rom from Axurus <-- i think thats how u spell it
Anyways, this happends while im at home, sitting on the same chair as i was when i had the 3G...and then boom..............3g just disappears and doesn't come back til' i restart....
Have you tried setting the mobile network to "WCDMA Only" ?
Mobilicity doesnt have a GSM network.
I don't get good 3G at my house and when I'm on edge in get almost full bars. How can I shut off 3G/4g? I did the 4636 thing and selected gsm only but I still see h+. What am I doing wrong ? Is there another way? App?
When change it I just back out by the back button...is there a diffremt way I should do it to save the gsm settings only?
Thanks
dvigue said:
I don't get good 3G at my house and when I'm on edge in get almost full bars. How can I shut off 3G/4g? I did the 4636 thing and selected gsm only but I still see h+. What am I doing wrong ? Is there another way? App?
When change it I just back out by the back button...is there a diffremt way I should do it to save the gsm settings only?
Thanks
Click to expand...
Click to collapse
Ok .. sigh... first off... the "bars" you are referring to indicates cell strength(voice calls/SMS) not data speed or strength. I think the atrix shows h+ no matter what as on my nexus it would change to H when using hsdpa and 3g for when on 3g and likewise for edge and even g **edit that's a cyanogen mod**. NOW as for switching to 2g only and disabling 3g it is ( settings> wireless & networks> mobile networks> select network = your choice) no need for *#*#4636#*#*
On another note if your getting slowdown on 3g try a restart... 2g is not going to be any faster.
Sent from my Xoom using XDA App
Besides going through the different setting menus, there are widgets available in the market that will act as a shortcut to the last (or semi-last) preference. I have it configured in Extended Controls
ChongoDroid said:
Ok .. sigh... first off... the "bars" you are referring to indicates cell strength(voice calls/SMS) not data speed or strength. I think the atrix shows h+ no matter what as on my nexus it would change to H when using hsdpa and 3g for when on 3g and likewise for edge and even g **edit that's a cyanogen mod**. NOW as for switching to 2g only and disabling 3g it is ( settings> wireless & networks> mobile networks> select network = your choice) no need for *#*#4636#*#*
On another note if your getting slowdown on 3g try a restart... 2g is not going to be any faster.
Sent from my Xoom using XDA App
Click to expand...
Click to collapse
ok...Sigh...
i know what the bars mean. what i am saying is, i get a way better signal at home/work with EDGE. i want to be able to shut off 3g, like i use to be able to on my iphone to save battery, and i jsut dont need the connection at home and work.
i went to the settings, and mobile networks is greyed out? how can i get into that menu?
wouwout said:
Besides going through the different setting menus, there are widgets available in the market that will act as a shortcut to the last (or semi-last) preference. I have it configured in Extended Controls
Click to expand...
Click to collapse
will it shut off 3g? and just keep EDGE? i have done it manually, but it does not seem to work?
no matter how many times i go into the 4636 screen and select GSM ONLY it goes right back to GSM/WCDMA
and i am so sick of looking service when it switches over from EDGE to 3g for ONE bar. what am i doing wrong? why cant i get it to STAY on EDGE>..this no service thing is making me wonder if i want to return this phone..
dvigue said:
no matter how many times i go into the 4636 screen and select GSM ONLY it goes right back to GSM/WCDMA
and i am so sick of looking service when it switches over from EDGE to 3g for ONE bar. what am i doing wrong? why cant i get it to STAY on EDGE>..this no service thing is making me wonder if i want to return this phone..
Click to expand...
Click to collapse
Try the widget call Extended Control and disable it. Good luck
dvigue said:
ok...Sigh...
i know what the bars mean. what i am saying is, i get a way better signal at home/work with EDGE. i want to be able to shut off 3g, like i use to be able to on my iphone to save battery, and i jsut dont need the connection at home and work.
i went to the settings, and mobile networks is greyed out? how can i get into that menu?
Click to expand...
Click to collapse
I forgot that I had to unlock my phone for it to work (canada, go figure) maybe thats why mine isn't greyed out.
Sent from my Motorola Olympus
After selecting 2g only mode, my Atrix still gets 4g speeds...
I am running the same phone under AT&T with 4.5.141. I rooted the phone and enabled the greyed out preference pane to select 2g only. Regardless of if I select 2g only there, and if I use the *#*#4636#*#* code, I can run speedtest and get 4g speeds .... Do I just need to go the cyanogen mod? Are there other preference panes that I need to edit? I am jealous of all of you out there who have successfully whipped their Atrix 4g!
Motorola Atrix 4g (v1) AT&T with 4.5.141
You will have to flash the n_1.100.00r radio
Sent from my MB860 using xda premium
hi all,
i plan to buy a mozart but i am wondering if i can put it permanently into 3g signal. we have 3g here in our location, i have an android and i put it permanently to 3g, when i tried mozart, it does not have feature, it just has dual band, so it switches to 2g everytime which i found frustrating. this is my only gripe with it. is there anyway to set it to 3g?
thanks!
Yes it does have 'Permanent' 3G, just like the iPhone, it has a option which you can turn on in the settings, i also hated that Android did not have a 3G switch either!
it says in the settings "when available" do if there is no or weak signal, it reverts to the 2g signal. i want it to be 3g everyday.
orouborus said:
it says in the settings "when available" do if there is no or weak signal, it reverts to the 2g signal. i want it to be 3g everyday.
Click to expand...
Click to collapse
Simple. Just go into phone dialer, key in ##3282#
then goto/tap on ... at the bottom on the right hand side. Under 'settings' you'll find the menu to change it whether 'automatic', '2g only' or '3g only'.
Good luck.
In settings, about phone, status what does it say for you guys on three uk under mobile network type.
Mine would say HSPDA regardless of being on 3g or H, now though it constantly displays UMTS
Is that normal? Is it because I've flashed a custom rom?
And also I've noticed my data connection changes often from 3g to H.
Lastly in network mode do you guys have it on auto or WCDMA only.
Thanks
Well it will switch to 3g(umts) when there isn't anybdata being sent/received. When you need data it switches to h(hspa) so you get the fastest speeds.
This is to save battery life, so when you check in settings your probably not pulling data.
Try downloading something then looking.
Sent from Samsung Galaxy S2 on TELUS.
Thanks for the helpful reply.
Another thing though, would it benefit me switching to wcdma only instead of auto,?
Hi
I just got Galaxy S2 att but I am in Europe, and since I don't use phone only for calls & sms I wonder if there is an option to permanently set phone to use GSM only?
I know the trick with ...4636... menu, where I can set to use gsm, but when I restart my phone it goes back to umts again.
Is there some hack to open that menu in "mobile networks" or should I use international rom?
I'd find what db it edits when you do that then make init.d script to make that edit every time you boot.
Sent from my SGH-I777 using Tapatalk
jivy26 said:
I'd find what db it edits when you do that then make init.d script to make that edit every time you boot.
Sent from my SGH-I777 using Tapatalk
Click to expand...
Click to collapse
can you explain me how to do it?
thanks
The phone should technically revert to edge. You see the phone by default is set to 3g prefered meaning in these situations in which roaming in another country and the frequency bands do not match or cannot find 3g in the area that in which your phone uses "att". It would in this case revert to a lower spectrum until it finds one your phone uses. So in this case it should be automatically reverting to edge when you hopped off the plane, boat, canoe, whatever.
gotjpeg said:
The phone should technically revert to edge. You see the phone by default is set to 3g prefered meaning in these situations in which roaming in another country and the frequency bands do not match or cannot find 3g in the area that in which your phone uses "att". It would in this case revert to a lower spectrum until it finds one your phone uses. So in this case it should be automatically reverting to edge when you hopped off the plane, boat, canoe, whatever.
Click to expand...
Click to collapse
I have 3g signal but it's love, and i have seen posts that 3g uses more battery, so since i don't use data i want be able to force phone to use gsm only.
I have tried *#*#4636#*#* but it won't switch to gsm, stays at 3g.
I got the same problem, dude. Still find no way...Using UNNAMED 2.2.1...
You can check you wireless setting menu--> Mobile network to see if there is an option for you to choos Use 2G only.
czbhs1986 said:
I got the same problem, dude. Still find no way...Using UNNAMED 2.2.1...
You can check you wireless setting menu--> Mobile network to see if there is an option for you to choos Use 2G only.
Click to expand...
Click to collapse
unfortunately there is no option to choose 2g because that menu option is gray, i can't even open it.
i am also using unnamed 2.2.1
Try *#2263# and in menu choose gsm only, then it will use only gsm network. Bu again, when you restart the phone it goes back to umts
Sent from my SAMSUNG-SGH-I777 using Tapatalk