Related
Hello everybody out there,
I updated the ROM of my O2 Xda II but I think the update did not materialize and in fact my PDA would not open. My PDA shows Serial at the top and v 1.06 below. When I put it in the cradle, it displays usb at the top and v 1.06 below. Can someone help me what to do to boot my pda in windows? Thanks.
U a in bootloader, at this point u can upgrade ur ROM if u want to go to window u may need to press restart button..............
gentleblueshark said:
U a in bootloader, at this point u can upgrade ur ROM if u want to go to window u may need to press restart button..............
Click to expand...
Click to collapse
Thks.
How can I reprogram my O2 Xda II to operate in windows mobile?
Sorry, can u explain again about what u need?
If u want to upgrade ur ROM, first u need enter bootloader then double click on HimalayUpgrade.exe after ROM Upgrade complete u will not see bootloader anymore until u enter bootloader.
gentleblueshark said:
Sorry, can u explain again about what u need?
If u want to upgrade ur ROM, first u need enter bootloader then double click on HimalayUpgrade.exe after ROM Upgrade complete u will not see bootloader anymore until u enter bootloader.
Click to expand...
Click to collapse
As of now my Xda II would not boot on the usual windows mobile operating system, all i can see now is a word serial on top and 1.06 below the screen. I do not know what to do and install to make my PDA return to its normal programs. maybe this is due to the failed software upgrade. What would I do and what should i install and where can i download it free? Thanks so much for your help. By d way I'm using vista so i think i would sync using windows mobile device center of the vista program.
Yeah may be u need Mobile Centere for vista. ur issue it seems to be need to re-install ROM. ROM u can search here that is compatible with ur PDA....
O2 Xda II Upgrade
I put my O2 Xda II on the cradle to upgrade it. My O2 Xda II is in bootloader mode
with usb written at the top. I run the HimaUpgradeUt.exe rom. It can't detect my O2 Xda II in the cradle. Can somebody help me please.
Still Undisolve?
You can eject the USB cabble and plug it in again and try to run the wizard
You have to install Microsoft ActiveSyn (4.5 final version for Windows XP) or Windows Mobile Device Center (Vista only) before for the USB can be detectable or reinstall it again
Ensure that you plug the USB cab directly into your PC not to a bridge
Good luck !
You can upgrade to WM6.1 for the latest ROM !
HOW CAN I USE bootloader IN MY PPC ???
if you are using Vista then change to a XP computer and do the ROM the way you did it the 1st time. I had the same problem with XDA Exec
help me..!!
hello all senior member..
i have same problem, when i put my XDA II on the cradle then run HimaUpgradenoId.exe after that showing 'error 101 fail connection'. whereas My PDA already shows USB at the top and v 1.06 below. Can someone help me what to do to boot my pda in windows Vista? Thanks.
Sammy - after many days of this same error, I decided to actually listen to the advice given earlier and use a laptop running XP, and NOT Vista.
I was able to then run HimaUpgradenoId.exe without getting any "failed connection" error messages that I had been getting with Vista.
Thank you so much. I did run on the same problem.
Going to try it out on a xp machine.
OMG all..If u could do a search in the google or the forum..there is a complete guide on Upgrading Via Windows Vista
See here for the Guide : http://buzzdev.net/read.php?64,29174
or Search RUU Upgrade in Vista
Yep it worked with XP.
And thank u Ather
HTC touch dual手机，刷了hardSPL 1.16 后反复刷了英文和简体中文版本都正常，今天试着在三色屏下，用 MTTY下执行了 task 2a 后，手机再起不来，也进不了三色屏，用数据线连接到计算机后，有提示找到硬件，但是一直提示查找驱动程序！进不了三色屏，也就刷不了ROM，怎么办呀？
English please! i don't understand this :s
gswangmd said:
HTC touch dual手机，刷了hardSPL 1.16 后反复刷了英文和简体中文版本都正常，今天试着在三色屏下，用 MTTY下执行了 task 2a 后，手机再起不来，也进不了三色屏，用数据线连接到计算机后，有提示找到硬件，但是一直提示查找驱动程序！进不了三色屏，也就刷不了ROM，怎么办呀？
Click to expand...
Click to collapse
HTC touch dual (P5520)
1. try to connect with MTTY via USB and type "task 2a" and "ResetDevice" reboot Nike,but device is dead!
You stay in Bootloader?
If yes ... MTTY type "boot"
If it doesnt work ... flash a full Rom or try via OEMSBL and MTTY "cego"
Arrgh, task 2a formats aARM flash
If your device is security unlocked it can be easily unbricked.
If not you will have to contact me for further steps (preferrably in english)
jockyw2001 said:
Arrgh, task 2a formats aARM flash
If your device is security unlocked it can be easily unbricked.
If not you will have to contact me for further steps (preferrably in english)
Click to expand...
Click to collapse
1. My NIKI maybe security unlocked.
2. Connect to Windows ,but prompy me to install 3 drivers.
My Question: How to flash ROM and make it normal. Please give me detail help message!
gswangmd said:
1. My NIKI maybe security unlocked.
2. Connect to Windows ,but prompy me to install 3 drivers.
My Question: How to flash ROM and make it normal. Please give me detail help message!
Click to expand...
Click to collapse
Check your PM and reply to me
jockyw2001 said:
Check your PM and reply to me
Click to expand...
Click to collapse
What PM?
P5520 OR NIKI 100?
jockyw2001 said:
Check your PM and reply to me
Click to expand...
Click to collapse
With MTTY and task 2a
My pda maybe stucked into OEMSBL: NO Os, No Radio and NO BOOTLOADER to load!
1. with MTTY via USB and type "task 2a" and "ResetDevice" reboot Nike,but device is dead!
2. Now, it doesn't respond to any of the buttons on the phone. Connect to Windows , always prompy me to install 3 drivers.
I think the phone is stucked into OEMSBL: NO Os, No Radio and NO BOOTLOADER to load. How to make it normal?
Now nike fault as follows:
1. Automatic entry into the boot (send + camera) engineering qualcomm mode
2. Do not show
3. Computer display driver to be installed, the installation msm7200 drive ok
4. Mtty open com8 (qualcomm diagnostics interface 6000 com8)
5. Not unlock,
Now only supports the following orders, testing various orders, but not retire this engineering model
Radata
Powerdown
Setboot
GO2AMSS
Rseed
Pmic_vib_off
Pmic_vreg
Pmic_level
Pmic_vib_on
Rpass
I also tested with kaiser(p4550) orders "setboot 1" it is not a show, but set back on the normal "setboot 0"
jockyw2001, come in pls!
try my mind
看得明中文？关机的情况下按住相机键（camera key）,然后插上USB，手机就会开机并进三色屏，或者按住相机键，再按电源开关，然后就可以再刷机了，要刷一个full rom。
用mtty有反映，
reboot是不行的提示Invalid command : reboot
cego也不行，提示Invalid command :cego
setboot有反映，提示ARM9BootMode:1
rseed也有反映，提示HTCS6B60C2B012B8E95520B0F4852802B89E*;ÔHTCE
其他就不知道怎么搞了。
手机买来时已经刷了hardspl，是否解锁还不太清楚，根据现在的情况看来，可能没有真正解锁。
看来kaiser买来时还是要自己先解锁再使用，免得出现真砖。
还是期待高手出现，不想寄回原厂，暂时使用830。
cantonese said:
看得明中文？关机的情况下按住相机键（camera key）,然后插上USB，手机就会开机并进三色屏，或者按住相机键，再按电源开关，然后就可以再刷机了，要刷一个full rom。
Click to expand...
Click to collapse
试过了，没有用！
Who can help me?
gswangmd said:
Who can help me?
Click to expand...
Click to collapse
No unbricker in the moment!
NetrunnerAT said:
No unbricker in the moment!
Click to expand...
Click to collapse
Who can help me?
I'm a long time lurker but I think that if jockyw2001 can't help you then your device is dead. Maybe the frankenkaiser unbricker tool can help you now - again jockyw2001 will know about that (it's his tool i think) or maybe netrunnerat.
help me...
WWE2.15 can be flashed in to 818pro, others can't...
only under xp or with a virtual machine under vista
which virtual machine do you use?
I am running xp on VirtualBox 1.6.4, and i can't flash my qtek s200.
I have configure 1 filter to all my use usb devices.
When i connect my phone, it synce with active sync, but when i run the rom installation program, when my phone displays the bootloader, virtualbox tolds me that it "failed to create a proxy device for the usb device".
Can you tell me how you did?
Note : sorry if my english is aproximative.
sorry i use a old win xp pc
but i hear that it works with VMware
and my english ist also bad too
thank you !
prophet -> throttle diamond and throttle diamon multi lang. both from gullum
kaiser -> throttle II also from gullum
soft and hardspl both phones, everything done under viste home premium 32bit.
no probs at all
and did you try do install tha radio rom 2.19?
schnitzelbrain said:
prophet -> throttle diamond and throttle diamon multi lang. both from gullum
kaiser -> throttle II also from gullum
soft and hardspl both phones, everything done under viste home premium 32bit.
no probs at all
Click to expand...
Click to collapse
Do you have a G3 Prophet?
I have a G3 and the radio rom install didn't work.
nope, I have a G4 and still the standard shipped radio rom
I have just tried to install gollum's rom on vista business 32bits, and the installation crashed.
ok, I've found this : http://forum.xda-developers.com/showthread.php?t=313001
I'll try and tell you if it works.
babinskyo said:
which virtual machine do you use?
I am running xp on VirtualBox 1.6.4, and i can't flash my qtek s200.
I have configure 1 filter to all my use usb devices.
When i connect my phone, it synce with active sync, but when i run the rom installation program, when my phone displays the bootloader, virtualbox tolds me that it "failed to create a proxy device for the usb device".
Can you tell me how you did?
Note : sorry if my english is aproximative.
Click to expand...
Click to collapse
I use vmware server 2 RC1 with a xp appliance, it works nice and easy.
babinskyo said:
ok, I've found this : http://forum.xda-developers.com/showthread.php?t=313001
I'll try and tell you if it works.
Click to expand...
Click to collapse
I've tried the driver and it does not work.
Thanks for VMware, i didn't knew the server version was free. I'll try it.
Flashing G4 Prophet with VMWare works well.
Thank you both, i've just tried vmware and it works !
vmware is the only way for me anyway to flash in vista. i'm sure it's the same for most of us.
don;t know how other people got the other way i.e old drivers etc to work...
Mmmmh, I think I should be thankful that my update didn't brick my prophet and the kaiser from my friend.
When the update fails on your pc is that always at a certain point ?
Do you have USB 2.0 connections and is legacy support in the PC BIOS disabled ?
Just asking for interest.
Hi guys here is a detailed description on how to get Mango 7720 on your device.
I was on DFT 7713 initially. there were errors so i had to go back to RUU_Mozart_Orange_UK_1.30.401.01_Radio_5.54.09.21_22.33b.50U_NoDo_by_ansar.
I lost all my sms so pls remember this.
my mozart is orange
1. power of device.
2. hold down volume button and power button
3. wait for drivers to install and see usb on screen.
4. install RUU_Mozart_Orange_UK_1.22.061.10_Radio_5.50.09.18_22.24.50.09U_by_ansar
5. Copy RUU_signed.nbh and SPL_signed.nbh from RUU_Mozart_HTC_Europe_1.30.401.01_5.54.09.21_22.33b.50_RELEASE_1 paste in RUU_Mozart_Orange_UK_1.30.401.01_Radio_5.54.09.21_22.33b.50U_NoDo_by_ansar.
6. run romupdateutility.
7. then follow instructions here to update to 7720
Good Luck
Have been running it for 3 days now with no issues, I too was on 7713 and had to go back to NoDO. It is the going back the loses the SMS not the upgrade. If you are already on NoDO then the upgrade keeps all existing data.
what are the improvements?
i think ill stay on 7713 until the off. release of mango
its stable 100% for me
7720 is the official release. The build that is available is the one that has been sent to the carriers and device manufacturers to customise and deploy. It appears to have been leaked by a M$ employee in Germany judging by the name on the work document included with the rom containing instructions.
What would you guys recommend for someone who still has the original ROM that came with the phone when it first came out, I.e. Not even the pre NoDo update. I'm on UK Orange and I'm not sure whether to go straight for Ansar's NoDo ROM then follow these instructions or take another route.
I'd appreciate any advice
Cheers,
Wes
wez_p said:
What would you guys recommend for someone who still has the original ROM that came with the phone when it first came out, I.e. Not even the pre NoDo update. I'm on UK Orange and I'm not sure whether to go straight for Ansar's NoDo ROM then follow these instructions or take another route.
I'd appreciate any advice
Cheers,
Wes
Click to expand...
Click to collapse
Check if you there are any updates for the phone by connecting to zune
if not follow my instructions from the first post.
my mozart originally came with an orange uk rom.
Can also use Stock Orange UK ROM as a starting point
Hi all
I think you can also use this ROM as a starting point:
http://forum.xda-developers.com/showthread.php?t=993176
Orange UK ROM 1.30
Worked for me
Cheers
andrew-in-woking
managed to update to 7720 thanks very much
some points to note:
1. the 7712 update took an age to get going and complete, so anyone who thinks it may have hung just stick with it and be patient. It completed eventually for me!
2. the 4.8.2134 version of Zune that comes with the install files gets updated to a newer version if you let it, which ultimately leads to the final ISVTo7720.bat file update failing because the updatewp tool is expecting the 4.8.2134 version of Zune. I got around this by simply uninstalling Zune and re-installing the 4.8.2134 version, then running the ISVTo7720.bat again
thanks again
Wes
800704DD, error message: An unexpected error has occurred.
I had a similar issues
I am running as administrator (i.e. cmd run as administrator)
windows 7 x64
have correct zune now
have correct wpupdate tool (also in folder)
phone is on home screen not locked
I get this error now, Any idea's?
Code:
Name: BLACKMOZART
KITLName: QSD8XXX01374430
Manufacturer: HTC
ModelId: 4
Model: 7 Mozart T8698
MobileOperator: 000-88
Version: 07.10.07712.03-00.00.00000.00-00.00.00000.00
Checking your phone's status: Completed in 0.01 seconds
Checking system requirements: Completed in 0.55 seconds
Downloading updates: Completed in 0.27 seconds
Error:
Update device 8c404eba - cd2a9e79 - 3d9324a5 - afd629db Complete with error code
: 800704DD, error message: An unexpected error has occurred.
oh wtf
if i DONT run it as admin it works
heh good to know
[BT]Black V said:
oh wtf
if i DONT run it as admin it works
heh good to know
Click to expand...
Click to collapse
so is it working now
Succesfully updated! 7712 indeed took almost an hour to complete, but everything is fine. Unfortunately, some apps don't work - TouchXplorer, Registry Editor, Battery Meter...
Ur device is locked. So u have to glad it again and follow the instructions again correctly. U can get un locked 7720.
Reagards
Sent from my 7 Mozart T8698 using XDA Windows Phone 7 App
You're right, following the instructions in the first post & on the wp7connect website leads to a dev locked phone.
One important note - make a copy of your backup created by Provisioning_Live as soon as it is finished! The Zune gets updated to the latest official 4.8.2345 (or so) and you'll have to uninstall it and get back to 4.8.2134 to make the update to 7720. Unfortunately, when uninstalling Zune the backup directory and all it's content IS DELETED and if you don't have it, you can't revert to a pre-update state!!!
I tried updating,
During the NoDoToRC\ISV_Provisioning_Live.exe step
- Read EULA, click agree
- Displayed windows with no text or button at all for a long time
- Checked Windows Phone Update folder, nothing inside
Is this normal and should I wait longer or something just went wrong ?
[Edit]
Does the Provisioning application check for hard drive free space ?
I changed to my notebook that has more free space and it runs smoothly.
nseika said:
I tried updating,
During the NoDoToRC\ISV_Provisioning_Live.exe step
- Read EULA, click agree
- Displayed windows with no text or button at all for a long time
- Checked Windows Phone Update folder, nothing inside
Is this normal and should I wait longer or something just went wrong ?
[Edit]
Does the Provisioning application check for hard drive free space ?
I changed to my notebook that has more free space and it runs smoothly.
Click to expand...
Click to collapse
Apparently you are running a newer version Zune. Uninstall it and install version Zune 4.8.2134.0 from the archives.
Start the installation of "updatewp" from the folder "update tool",selecting the correct version, 32 - or 64-bit.
Connect divice to your computer. Open the folder "NoDoToRC" and run "ISV_Provisioning_Live.exe" with administrator privileges. Wait for the end of the process and restart device.
THX)))
I checked and double checked the Zune installation.
And originally the Zune on my desktop are still at 4.7, so I installed the 4.8 from the package. Then uninstall and install it again several times.
Anyway, all goes well from my notebook and running 7720 now
guys i currently have:
german t-mobile mozart running
OS: 7392
Bootloader: 1.33.2250.1
now i'm not sure what do i need to do in order to get mango on it...
should i downgrade it to some earlier version first or something else?
cheers
Whether u want locked mango or unlocked mango
if u want locked mango just update through zune thats all....
If u want unlocked mango read this thread and follow,
http://forum.xda-developers.com/showpost.php?p=16594869&postcount=2
regards
cheers for quick reply...
if i'm not mistaken, chevron will offer some way to unlock the phone "officially" soon... if that's the case, then i'll wait for that and in the meantime install locked mango...
but when you say update through zune, do you mean WAIT for update through zune, or download the mango from here and install it?
thanks again
i have dreamskpark dev account for 1 year...
i want to dev unlock my lumia 800 my lumia 800-rm-801 dload bootloader, windows 7.8, as i want to deploy 8 xap apps on my phone..
i downloaded 7.1 sdk & installed it on my windows 7 64bit pc...
i tried to install SDK Update for Windows Phone 7.8 but after some downloading it shows error installing some "kb" something file...
i tried finding windows developer registeration tool but couldn't find it installed on my pc...
then i found the attached windows registeration tools from some other posts...
i tried it but it consistently says that it couldn't find my phone
i have synced my phone with zune(latest version). (it shows sync relationship status: guest, if that helps)
please help me in deploying xap's to my phone
prateek57 said:
i have dreamskpark dev account for 1 year...
i want to dev unlock my lumia 800 my lumia 800-rm-801 dload bootloader, windows 7.8, as i want to deploy 8 xap apps on my phone..
i downloaded 7.1 sdk & installed it on my windows 7 64bit pc...
i tried to install SDK Update for Windows Phone 7.8 but after some downloading it shows error installing some "kb" something file...
i tried finding windows developer registeration tool but couldn't find it installed on my pc...
then i found the attached windows registeration tools from some other posts...
i tried it but it consistently says that it couldn't find my phone
i have synced my phone with zune(latest version). (it shows sync relationship status: guest, if that helps)
please help me in deploying xap's to my phone
Click to expand...
Click to collapse
Not sure if this is the problem, but if you had Nokia Care Suite installed you need to remove the drivers [believe that are called WinUSB] that came bundled with it before Zune can connect properly to the phone.