Hey guys,
Im really freakin out right here. Feel like I messed up my entire recovery.
I was on a stock samsung firmware, then installed cf-root, was working like a charm. Switched back to the original kernel. Then I decided I wanted the Litening rom on my device.
I had problems installing it, for Odin did not work. Then I installed Rom Manager, and installed their recovery. That surely was a huge mistake.
Now I can't flash any kernel or rom (the phone itself boots fine though), it says e signature failed.
I can't flash back to my backup file made with the CWM app, after I put on CF/root. If I try to go back into the recovery mode using the CWM app, im getting the recovery menu from Rom Manager.
I can´t flash the kernel using Odin. It keeps hangin at setupconnection.
What should I do?
you should have read the CF-Root thread.
CWM Manager
Because of incompatibility with ROM Manager, I wrote and included "CWM Manager". This is a new app (as of March 30, 2011). You can find it under Applications -> CWM. It is much faster to use than manually booting into CWM and selecting these options.
Click to expand...
Click to collapse
you should NOT use Rom manager, with the CF-Root kernel!
Start searching first people please.
Sent from my GT-I9100 using XDA App
I have got a complete backup of my phone, made with CWM. Is there a way to get that one back in place. Or is there a way to flash back to stock using Odin?
Go to wwwDOTsamfirmwareDORcom/WEBPROTECT-i9100.htm They have a database of SII stock roms. You can flash the stock rom using ODIN in download mode (home+power+volume down, while the phone is off). Follow the instructions on the site. If you need help picking a ROM, just ask me. This site is safe. I've used it before when I screwed up my VillainROM installation.
you should also uninstall rom manager. that should be the first thing you do.
Managed to flash back to stock Many thanks!
delete wrong post
jje
thx guys
you helped me a lot
Hey everyone,
First of all, i apologize if any of what i'm asking here is stuff that has been covered before. I have been searching myself for answers for the last several days and have found plenty of good info, but i am new to android and i think i need to ask some question to help get a base level understanding of what i need to do. I am a bit nervous about bricking my phone so i maybe haven't been as adventurous trying to get everything running as god intended.
Firstly, i have used and understand Odin, using it to flash roms and such. I have rooted the phone and installed ROM Manager and clockworkmod 4.0.1.5 on the phone, but when i boot into recovery mode, it is still on the android recovery 3e and i cannot do the update.zip, I get signature verification failed. Now i KNOW this is cause of the android recovery 3e, and i have found this issue has been encountered plenty before, but my confusion is in some of the solutions i have found. Mainly the terminology and how the steps directly apply to the phone. For example, I found on another forum thread :
1- Copy the Zimage from your rooted kernel and paste it to SD card of your phone.
2- Flash the Stock kernel via Odin to get rid of Yellow triangle.
3- Flash the Zip file (Zimage) via CWM which you've already pasted in Step 1.
i don't really understand what the zimage is. Why do i need it, what IS it frankly? Where do i get it or a stock kernel for my phone. Does versioning matter much? i read that for the most part the kernels are almost identical to each other, and the fact all i really need is for the android recovery mode to be 2e or whatever it is (so it will not do the signature check on the update.zip file), that i don't really need to pay much attention to the actual kernel version.
What i really need i guess is for someone to break it down for me and either explain the steps or give me a detailed step by step on how to get clockworkmod recovery working so i can proceed with the cyanogen mod running on phone (not enjoying touchwiz at all).
Again, sorry if i am giving anyone spasms at my noobish-ness, but i have been searching for my answers for a day or two now and i haven't been able to find anything that really tells me what i need to know.
Phone : GT-I9100M
Android : 2.3.3
Kernal : 2.6.35.7-I9100XWKDD-CL
Build : GINGERBREAD.UGKG2
Thanks
riccochet said:
Hey everyone,
clockworkmod 4.0.1.5 on the phone, but when i boot into recovery mode, it is still on the android recovery 3e
That means you have not installed it flash CWM and \Root from here .
Root + CWM .
http://forum.xda-developers.com/showthread.php?t=1103399
Beware of following instructions from a separate rom to the one you are flashing .
1- Copy the Zimage from your rooted kernel and paste it to SD card of your phone.
2- Flash the Stock kernel via Odin to get rid of Yellow triangle.
3- Flash the Zip file (Zimage) via CWM which you've already pasted in Step 1.
i don't really understand what the zimage is.
ZImage is the kernel .
Why do i need it, what IS it frankly? Where do i get it or a stock kernel for my phone. Does versioning matter much? i read that for the most part the kernels are almost identical to each other, and the fact all i really need is for the android recovery mode to be 2e or whatever it is (so it will not do the signature check on the update.zip file), that i don't really need to pay much attention to the actual kernel version.
You are confusing yourself .
Flash correct CWM from above link .
Choose the custom rom and follow the instructions posted for that rom .
CyanogenMod as the man says
Warning : Not for new users, flash this build only if you know what you are doing !!!
#Followed by his install instructions ~~~
jje
Click to expand...
Click to collapse
Thanks for the reply. I have been doing more reading and i think i am understanding the rooting process a bit better.
I looked at the link you posted (thanks for that, i saw the forum post for the i9000 but i never could find the i9100 post for some reason) and i DO have another question after reading through a good chunk of the posts on it.
There is no CF Root for my kernel, but the reply that was made to someone else with my kernel version was :
"Flash the Stock 2.3.4 ROM (XXKG5, XXKG6 or XXKG7) and root with CF-Root-XXKG6."
I understand that process and how it works but i thought you were only supposed to flash roms based on your firmware version? My KDD kernel version is running on 2.3.3
Will this cause any issues if i flash the stock 2.3.4 ROM?
Download cm7 zip for the newest nightly.
Copy it to internal sd card.
Flash any cf root kernel
Boot into recovery
Wipe data and cache, you will lose all your data on your phone, so backup sms (I recommend sms backup +), also you will lose App data so you might want to back that up first using something like titanium backup.
Wipe dalvik cache (under advanced)
Chose install zip from sd card
Select the cm7 zip
Reboot
If you get stuck at the boot screen go back into recovery and flash the zip again
Sent from my GT-I9100 using XDA Premium App
Thanks Veyka.
I think i'm ok with the CM7 install process. I am probably going to wait until i really feel like i understand the whole process from front to back before i start messing with that though.
I can't get to that point yet however since i haven't been able to get CWM recovery working yet. I have the Android Recovery 3e, which will not install from zip files that aren't digitally signed.
So i'm trying to get CF Root installed and working, however, as mentioned in my previous post there is no CF Root for my kernel. I would like it clarified if it is ok for me to flash to a 2.3.4 stock ROM (i'm running 2.3.3) and then use a CF root for a the new ROM.
I was under the impression that this was not a good idea.
If i should not be doing this, is there a recommended way to upgrade my firmware to 2.3.4 so i can use a newer CF Root?
Thanks
Pick a new stock rom, I would go for kg6, flash it via odin.
Then flash the kg6 CF root kernel via odin and you will have cwm recovery.
Don't put the pit into odin and don't tick repartition or update bootloader.
There is a good thread with all the info you need on flashing stock roms with odin and a list of all avaliable roms.
Sent from my GT-I9100 using XDA Premium App
Thanks for all the help. I was able to make sense of the process (which is actually quite simple, just needed to put it all together in my head to make sense) and get everything done.
Appreciate all the help!
veyka said:
Download cm7 zip for the newest nightly.
Copy it to internal sd card.
Flash any cf root kernel
Boot into recovery
Wipe data and cache, you will lose all your data on your phone, so backup sms (I recommend sms backup +), also you will lose App data so you might want to back that up first using something like titanium backup.
Wipe dalvik cache (under advanced)
Chose install zip from sd card
Select the cm7 zip
Reboot
If you get stuck at the boot screen go back into recovery and flash the zip again
Sent from my GT-I9100 using XDA Premium App
Click to expand...
Click to collapse
Hi,
I have rooted my phone using the quick root guide found here and therefore I have my stock kernel back w/ root. Do I need to install a cf root kernel?
Also, when the new ROM gets flashed how does one recover the apps and data lost?
NABNAP said:
Hi,
I have rooted my phone using the quick root guide found here and therefore I have my stock kernel back w/ root. Do I need to install a cf root kernel?
Also, when the new ROM gets flashed how does one recover the apps and data lost?
Click to expand...
Click to collapse
Use Titanium Backup PRO for your app. You can backup all of them then restore on any rom.
Is there anything that Titanium Backup doesn't back up for which I need to use another application?
Thanks.
NABNAP said:
Is there anything that Titanium Backup doesn't back up for which I need to use another application?
Thanks.
Click to expand...
Click to collapse
sms.. use another app to backup your sms.. for example sms backup as mentioned before..
Hi All,
I have tried to find an answer to this question on XDA forum and tried to google it as well, but came up with nothing. So if it has been answered before, I apologize in advance.
I have rooted my i9100 using CF-ROOT. I was running XWLP8 so I used the corresponding rooted kernel and all is well. Currently I am using Resurrection Remix latest version.
No I want to have official clockworkmod touch recovery on my phone. I have installed ROM Manager and downloaded recovery-clockwork-touch-5.8.1.5-galaxys2.zip from clockworkmod website. I flashed it using CWM that came with CF-ROOT.
This is where things go wrong. After I flashed the new recovery and tried to reboot into recovery from ROM Manager, I got a blank screen. Tried to press some buttons but it gave me an intermittently flashing white screen, nothing else.
I tried to reboot normally again but it wouldn't do that either. I guess it was a soft brick.
So I had to flash CF-ROOT kernel using Odin, and then flash Resurrection Remix again. After that, things are ok. But now I am reluctant to try the new touch recovery.
So my question is, has anyone encountered this before? If so, is there a proven way to this?
Thanks for your help.
Rom manager doesn't work on S2.
Get the zip file and flash using cwm as normal and it will be updated to touch.
NOOOOOOOO DO NOTTTTTT use rom manager.
That thing is responsible for so much damage over the last 12 month, it sucks big time.
Look whats the issue here, if you have flashed cfroot kernel then you alread have a version of recovery on your phone which is no different to the official cwm recovery, get the same things, and you get the cwm app in ya app drawer, very very powerful little rom and kernel flashing tool indeed.
SO, what is it you really want, at a guess id say, you really want to the touch recovery, because the normal one isnt going to give you anything different to what you already have.
Goto the recovery site or use google to find it, download the latest version for your phone, stick it on the root of your sd card, reboot to cwm recovery that you already have, and choose to flash zip.
Done.
Thank you all, I will try this method as spoon as i manage and let you know. Thanks
Sent from my GT-I9100 using Tapatalk 2
Hello all. I have had Shostock3 for a while now and read that if you use the Siyah Kernel with it then it is an awesome combo. Well I downloaded the kernel and went to install it through CWM and now I have a big problem. I chose to reboot and install the kernel and when I did I am now STUCK at the screen that says "Samsung Galaxy S II GT-i9100" with the yellow triangle. I have let it just sit and see what it does but it goes no where. WHAT DO I DO?!?!?! HELP! Thanks all!
Samsung Galaxy S II i777
Running Shostock3
WAS running with default kernel that comes with Shostock3
EDIT: It doesn't seem that I can get into the recovery mode either. I am trying the volume button + power button combination and having no luck....
nbarr7655 said:
Hello all. I have had Shostock3 for a while now and read that if you use the Siyah Kernel with it then it is an awesome combo. Well I downloaded the kernel and went to install it through CWM and now I have a big problem. I chose to reboot and install the kernel and when I did I am now STUCK at the screen that says "Samsung Galaxy S II GT-i9100" with the yellow triangle. I have let it just sit and see what it does but it goes no where. WHAT DO I DO?!?!?! HELP! Thanks all!
Samsung Galaxy S II i777
Running Shostock3
WAS running with default kernel that comes with Shostock3
EDIT: It doesn't seem that I can get into the recovery mode either. I am trying the volume button + power button combination and having no luck....
Click to expand...
Click to collapse
Which siyah did you flash. The one you want is called AJK now
122ninjas said:
Which siyah did you flash. The one you want is called AJK now
Click to expand...
Click to collapse
/Siyah-I777-v7.9b-S.zip
Is the name of the file that I tried to put on. Should I try to get the one that you stated and put it on via download mode? Because it seems that I can get into download mode but that's about it. I can't get into recovery.
nbarr7655 said:
/Siyah-I777-v7.9b-S.zip
Is the name of the file that I tried to put on. Should I try to get the one that you stated and put it on via download mode? Because it seems that I can get into download mode but that's about it. I can't get into recovery.
Click to expand...
Click to collapse
Hold power button plus volume up and volume down, keep it held in until you boot into recovery. Recovery won't just disappear, normally people just aren't holding them in long enough or are using the wrong button combo. Let us know if you get back up and running. Also make sure when installing the siyah kernel you're following the OP directions to the letter.
Phalanx7621 said:
Hold power button plus volume up and volume down, keep it held in until you boot into recovery. Recovery won't just disappear, normally people just aren't holding them in long enough or are using the wrong button combo. Let us know if you get back up and running. Also make sure when installing the siyah kernel you're following the OP directions to the letter.
Click to expand...
Click to collapse
I can't get into recovery. I simply cant. I hold the buttons, correctly might I add, and then the logo appears, then goes away and I am left with nothing but a blank, black screen. The bottom buttons aren't even lit.
Possible hardware failure on your power button or one of your volume buttons I supposed. Have you tried flashing a siyah.tar file in odin to get a.different usable recovery?
Phalanx7621 said:
Possible hardware failure on your power button or one of your volume buttons I supposed. Have you tried flashing a siyah.tar file in odin to get a.different usable recovery?
Click to expand...
Click to collapse
If you could link me a Siyah kernel that is in a .tar format I would be appreciative.
Dude do as Phalanx says. Vol up+Vol down+ Power and even after the logo goes away dont release the buttons. Recovery will show up.
Sent from my SGH-I777 using xda premium
Either that or if you get adb up an running on your computer, hook up your phone via usb and type (this is for mac, may be slightly different for other os's):
adb root
adb reboot recovery
and voila! your phone boots up in recovery!
can't get past boot screen on siyah 5.0.1
I spent all the time I could thinking I had this but apparently I don't!
Have AT&T Samsung i777 running the latest stock 4.1.2 that I got from Kies.
Wanted to try my hand at custom roms.
Was able to root phone using flamaroot which gave me SU ability
Bought Mobile Odin pro, downloaded Siyah .tar file and put it on SD.
Flashed it with mobile Odin.
Because I'm an idiot, I was hoping to make a rom backup after flashing.
Now, it boots "Samsung" then the Siyah screen, then goes blank.
I can get into CWM recovery but without a backup rom to restore to I'm not sure what to do.
Also, can get into Download mode which reads:
ODIN MODE
Product Name: SGH-I777
Custom Binary Download: NO
Current Binary: Samsung Official
However, it reads downloading, but I do not believe there's anything to download and it's been like this for 20 minutes
ANY ideas on what I could or should do would be GREATLY appreciated. Thanks!
Kurt
kurtisherzog88 said:
I spent all the time I could thinking I had this but apparently I don't!
Have AT&T Samsung i777 running the latest stock 4.1.2 that I got from Kies.
Wanted to try my hand at custom roms.
Was able to root phone using flamaroot which gave me SU ability
Bought Mobile Odin pro, downloaded Siyah .tar file and put it on SD.
Flashed it with mobile Odin.
Because I'm an idiot, I was hoping to make a rom backup after flashing.
Now, it boots "Samsung" then the Siyah screen, then goes blank.
I can get into CWM recovery but without a backup rom to restore to I'm not sure what to do.
Also, can get into Download mode which reads:
ODIN MODE
Product Name: SGH-I777
Custom Binary Download: NO
Current Binary: Samsung Official
However, it reads downloading, but I do not believe there's anything to download and it's been like this for 20 minutes
ANY ideas on what I could or should do would be GREATLY appreciated. Thanks!
Kurt
Click to expand...
Click to collapse
Where did you get the Siyah 5.0.1 in tar format? It sounds like you tried to flash a kernel that is not compiled for your phone. You need a kernel that is compiled specifically for the SGH-I777.
If that is the case, then you should be able to recover by flashing a good kernel using Odin, if you can find a tar version, or just flash the 4.1.2 stock firmware with Odin, which you can get from the Download Repository or from sammobile.com/firmware or Samsung-updates.com.
But first, since you can get into recovery, try performing a wipe data/factory reset to see what happens.
creepyncrawly said:
Where did you get the Siyah 5.0.1 in tar format? It sounds like you tried to flash a kernel that is not compiled for your phone. You need a kernel that is compiled specifically for the SGH-I777.
If that is the case, then you should be able to recover by flashing a good kernel using Odin, if you can find a tar version, or just flash the 4.1.2 stock firmware with Odin, which you can get from the Download Repository or from sammobile.com/firmware or Samsung-updates.com.
But first, since you can get into recovery, try performing a wipe data/factory reset to see what happens.
Click to expand...
Click to collapse
Thank you so much for helping me! First of all, I used your post, "Odin3 One-click Downloaders for Stock and Stock + Root" and was able to follow those steps to get me back to 2.3 and then I connected back to Kies to get back to stock 4.1.2. SO, I am completely back where I started a week ago, but I have a phone that works thanks to you!!
To answer your question: because I was using Mobile Odin, it only recognized .tar files and I found one on Siyah's blog (gokhanmoral) which was categorized under "sgs2 kernel".
So I'm back to the start (actually did the unrooted one so I don't even have it rooted currently). However, with all the reading I've been doing on this forum, I can't shake the desire to use a custom rom. I know I'm very much a noob and probably should make myself happy with my phone, but I wanna give it another try. I understand with my following questions if I'm posting in the wrong area and cannot have my questions answered.
Here's where I'm stuck. I know I need to make a custom recovery (cwm or twrp I'm not totally sure) before flashing a custom kernel and then rom. But I just can't figure out how to do it. When I go into recovery (holding volume buttons and power), there is not option for "backup and restore". How can I get a backup of my current rom so I can start with the other stuff?
The order as I understand it:
1. root phone
2. install cwm or twrp in order to create a backup of current rom
3. flash a custom kernel
4. flash a custom rom (that is compatible with kernel)
Thanks so much again for all your help!!
Kurt
kurtisherzog88 said:
Thank you so much for helping me! First of all, I used your post, "Odin3 One-click Downloaders for Stock and Stock + Root" and was able to follow those steps to get me back to 2.3 and then I connected back to Kies to get back to stock 4.1.2. SO, I am completely back where I started a week ago, but I have a phone that works thanks to you!!
To answer your question: because I was using Mobile Odin, it only recognized .tar files and I found one on Siyah's blog (gokhanmoral) which was categorized under "sgs2 kernel".
So I'm back to the start (actually did the unrooted one so I don't even have it rooted currently). However, with all the reading I've been doing on this forum, I can't shake the desire to use a custom rom. I know I'm very much a noob and probably should make myself happy with my phone, but I wanna give it another try. I understand with my following questions if I'm posting in the wrong area and cannot have my questions answered.
Here's where I'm stuck. I know I need to make a custom recovery (cwm or twrp I'm not totally sure) before flashing a custom kernel and then rom. But I just can't figure out how to do it. When I go into recovery (holding volume buttons and power), there is not option for "backup and restore". How can I get a backup of my current rom so I can start with the other stuff?
The order as I understand it:
1. root phone
2. install cwm or twrp in order to create a backup of current rom
3. flash a custom kernel
4. flash a custom rom (that is compatible with kernel)
Thanks so much again for all your help!!
Kurt
Click to expand...
Click to collapse
OK, glad your're back to working. The Siyah kernel you flashed is for the GT-I9100, the international version of the Galaxy s2. As I said, you will need a kernel that is compiled specifically for the SGH-I777, so get your kernel from the I777 Android Development Forum.
Next, you can also use a straight zImage file with Mobile Odin. You don't have to have a tar. You can even download a ClockworkMod flashable zip file and use an archiving tool such a Win Zip or 7Zip to open it and extract the zImage from it. Then use that to flash through Mobile Odin.
You currently have the stock 3e Recovery, which does not have a backup facility, nor the ability to flash custom firmware (unless it is signed by Samsung.) So you need to install a custom kernel with ClockworkMod Recovery (or TWRP Recovery will also work.) By the way, those are just different developers versions of almost exactly the same recovery functions, so it doesn't really matter which you use.
For a kernel, go to this post in the development section and download the third of four which is titled "AJK v2.0.5 NO-SWAP Samsung." As I said above, extract the zImage from the zip and use that to flash in Mobile Odin.
Also on this phone, recovery and the kernel are not separate, they are one unit, so you install the kernel to get the custom recovery. Your steps 2 and 3 are incorrect. Remove step 2 entirely. Step 3 will install both the kernel and the custom recovery. In step 4, you can flash any custom firmware you want. They all come with an included kernel, so it doesn't matter what kernel you start with because after you flash you will have a different kernel anyway.
And finally, don't worry about backing up the stock firmware. If you mess up the flash, or soft brick the phone, you can just reinstall stock as you did before. After you have a custom firmware installed, and have your phone configured exactly the way you want it, then is the time to make a backup, because you can flash to a different custom firmware to try it out, and if you don't like it, you can restore your backup and be back to exactly where you were.
creepyncrawly said:
OK, glad your're back to working. The Siyah kernel you flashed is for the GT-I9100, the international version of the Galaxy s2. As I said, you will need a kernel that is compiled specifically for the SGH-I777, so get your kernel from the I777 Android Development Forum.
Next, you can also use a straight zImage file with Mobile Odin. You don't have to have a tar. You can even download a ClockworkMod flashable zip file and use an archiving tool such a Win Zip or 7Zip to open it and extract the zImage from it. Then use that to flash through Mobile Odin.
You currently have the stock 3e Recovery, which does not have a backup facility, nor the ability to flash custom firmware (unless it is signed by Samsung.) So you need to install a custom kernel with ClockworkMod Recovery (or TWRP Recovery will also work.) By the way, those are just different developers versions of almost exactly the same recovery functions, so it doesn't really matter which you use.
For a kernel, go to this post in the development section and download the third of four which is titled "AJK v2.0.5 NO-SWAP Samsung." As I said above, extract the zImage from the zip and use that to flash in Mobile Odin.
Also on this phone, recovery and the kernel are not separate, they are one unit, so you install the kernel to get the custom recovery. Your steps 2 and 3 are incorrect. Remove step 2 entirely. Step 3 will install both the kernel and the custom recovery. In step 4, you can flash any custom firmware you want. They all come with an included kernel, so it doesn't matter what kernel you start with because after you flash you will have a different kernel anyway.
And finally, don't worry about backing up the stock firmware. If you mess up the flash, or soft brick the phone, you can just reinstall stock as you did before. After you have a custom firmware installed, and have your phone configured exactly the way you want it, then is the time to make a backup, because you can flash to a different custom firmware to try it out, and if you don't like it, you can restore your backup and be back to exactly where you were.
Click to expand...
Click to collapse
Wow, excellent information and I cannot thank you enough for taking the time to help me out. My last question hopefully, and I don't mean to try your patience but what is the best way, would you recommend, to root my phone? I did it with flamaroot previously but it was temporary? Thanks!
Kurt
I have no experience with 4.1.2 and framaroot since I'm running Shostock3. No one who has used that method has said anything about it not being a permanent root. Why do you think it's not permanent?
I think it will be fine. Anyway after you root you're going to install a custom kernel followed immediately by a custom firmware which will be rooted. So even if it wasn't permanent it wouldn't matter.
Sent from my SGH-I777 using xda app-developers app
creepyncrawly said:
I have no experience with 4.1.2 and framaroot since I'm running Shostock3. No one who has used that method has said anything about it not being a permanent root. Why do you think it's not permanent?
I think it will be fine. Anyway after you root you're going to install a custom kernel followed immediately by a custom firmware which will be rooted. So even if it wasn't permanent it wouldn't matter.
Sent from my SGH-I777 using xda app-developers app
Click to expand...
Click to collapse
Yeah, I read somewhere that flamaroot was not permanent. Anyway, did exactly as you said and everything is working perfectly!! I seriously can't thank you enough for working with me. Trying SuperNexus to start but this is amazing!!
Kurt
phone completely frozen
hey guys
recently i've just got a 4.4 kitkat rom for my gt-s5300 and it worked preety well.
but i've downloaded a kernel rom(NeohmKernel_v1_s5301_OhmPsy.zip) that i didn't know that it wasn't compatible with my phone and now it stucked in boot screen. i've turned it on and wait for 2 hours if maybe it will work, but the phone still stucked in boot screen.
i've tried to fix this by pressing power+up vol but didn't work
pls help. it's my only phone i've got(but i know this phone is sh*tty)
-Mamelic
try to hard reset your phone... pressing volume up+power+home buttons together... nd let me knw if it works
Sent from my SGH-M919 using XDA Free mobile app
gaurav gaba said:
try to hard reset your phone... pressing volume up+power+home buttons together... nd let me knw if it works
Sent from my SGH-M919 using XDA Free mobile app
Click to expand...
Click to collapse
yeah i've tried but it's still stuck
it only shows the logo"GT-S5300 (SAMSUNG on bottom)" only and it's now booting
i've been stupidly downloading rom patches before(i've got android jellybean, android ICS, and android kitkat custom rom)
---------- Post added at 06:07 AM ---------- Previous post was at 05:35 AM ----------
Kotkot_Mamelic15 said:
yeah i've tried but it's still stuck
it only shows the logo"GT-S5300 (SAMSUNG on bottom)" only and it's now booting
i've been stupidly downloading rom patches before(i've got android jellybean, android ICS, and android kitkat custom rom)
Click to expand...
Click to collapse
adn yea i've forgot that i've found this thread: http://forum.xda-developers.com/showthread.php?t=1921421
fortunately i've tried to press power+down vol.+home btn and i've got this message"warning!! a custom os can cause critical problems in your phone and installed applications. if u want to download a custom os, press vol up key. otherwise, press the vol down key to cancel." and got odin3 v1.87 cuz it says that this thing will help me. but unfortunately i don't know how to use it
Kotkot_Mamelic15 said:
adn yea i've forgot that i've found this thread: http://forum.xda-developers.com/showthread.php?t=1921421
fortunately i've tried to press power+down vol.+home btn and i've got this message"warning!! a custom os can cause critical problems in your phone and installed applications. if u want to download a custom os, press vol up key. otherwise, press the vol down key to cancel." and got odin3 v1.87 cuz it says that this thing will help me. but unfortunately i don't know how to use it
Click to expand...
Click to collapse
First off, this forum is not for your phone, it is for the SGH-I777 AT&T Galaxy SII, so we don't know the specifics of your phone.
Following the above procedure will put your phone into download mode, where you can flash the firmware you linked.
Since you say you don't know how to use it, I am going to post a complete set of instructions for using Odin that I wrote some time ago. Bear in mind that this is for the I777, and you will have to adjust some things to make it work for your phone. Refer to the flashing instructions in the thread you linked.
How to use stand-alone Odin3 to flash firmware:
Follow and recheck each of the following steps. Do them in order listed, as some steps are dependent on previous steps. Instructions are for Odin3 v1.85. It should work with any version of Odin, but some details, like color of items, may be different.
1.) Open Odin on the Windows Desktop.
2.) 3.) 4.) Put your phone into download mode.
5.) In Odin, you should get the yellow box under where it says ID:COM with the text 0:[COMx], and in the Message area, <ID:0/00x> Added!! where x is some number, usually 1-8.
6.) In Odin, make sure Auto Reboot and F. Reset Time are checked and all other items are not checked.
7.) Click on the PDA button. Browse to the tar file you want to install and select it so its path appears in the text edit box next to the button.
8.) Make sure the check box next to the PDA button is checked.
9.) Click the Start button.
10.) You should see the green progress bar advancing.
11.) When complete, you will get a PASS (or FAIL if unsuccessful).
If after the successful flash your phone does not boot into the firmware, then perform a hard reset. I don't know your phone, but normally you would boot into recovery and perform a wipe data/factory reset.
Help! So I rooted my Galaxy s5 using CF-auto-root and SuperSU and I flashed what I thought was CWM recovery from XDA, I installed mod manager which I then gave access to boot to recovery and now my phone is stuck in a custom recovery bootloop. Only if I remove the battery as it's about to turn off can I access download mode by holding relevant buttons but I am concerned that I have bricked my phone because there seems to be no stock recovery any more. Also mod manager listed TWRP as installed as well as CWM. Any help as to what I can flash through download mode or change files on my computer to help this problem would be appreciated. Extra Details:
Model Number: SM-G900F
Android Version: 6.0.1
Zaft said:
Help! So I rooted my Galaxy s5 using CF-auto-root and SuperSU and I flashed what I thought was CWM recovery from XDA, I installed mod manager which I then gave access to boot to recovery and now my phone is stuck in a custom recovery bootloop. Only if I remove the battery as it's about to turn off can I access download mode by holding relevant buttons but I am concerned that I have bricked my phone because there seems to be no stock recovery any more. Also mod manager listed TWRP as installed as well as CWM. Any help as to what I can flash through download mode or change files on my computer to help this problem would be appreciated. Extra Details:
Model Number: SM-G900F
Android Version: 6.0.1
Click to expand...
Click to collapse
flash the stock firmware from sammobile.com/firmwares via odim, it packs the stock recovery also
You will have to flash the full stock firmware and start all over from scratch. Also don't waste your time with CWM. It is outdated and has not been updated in years.
TimurAlaskara_TR said:
flash the stock firmware from sammobile.com/firmwares via odim, it packs the stock recovery also
Click to expand...
Click to collapse
THANK YOU for your help! It is much appreciated. I'll get to that!
zelendel said:
You will have to flash the full stock firmware and start all over from scratch. Also don't waste your time with CWM. It is outdated and has not been updated in years.
Click to expand...
Click to collapse
Thanks for that point about CWM - no wonder it's caused problems. If I can't fix the problem I was considering buying a new phone anyway hence me rooting my phone and flashing ROMs but I'll flash the full firmware from Samsung's website.
Zaft said:
Thanks for that point about CWM - no wonder it's caused problems. If I can't fix the problem I was considering buying a new phone anyway hence me rooting my phone and flashing ROMs but I'll flash the full firmware from Samsung's website.
Click to expand...
Click to collapse
Think that was given is not Samsung site. It is by someone else and we don't advise it's use.
It won't be hard to fix it but understand it will completely wipe your device.
zelendel said:
Think that was given is not Samsung site. It is by someone else and we don't advise it's use.
It won't be hard to fix it but understand it will completely wipe your device.
Click to expand...
Click to collapse
I did make a copy of all my android files before rooting and took pictures etc off it. Ah, I see. Well even if it's the correct firmware I'd rather at least try that - any working phone is better than one with files stuck in a faulty recovery boot-loop.
Zaft said:
I did make a copy of all my android files before rooting and took pictures etc off it. Ah, I see. Well even if it's the correct firmware I'd rather at least try that - any working phone is better than one with files stuck in a faulty recovery boot-loop.
Click to expand...
Click to collapse
Okay so installing the firmware worked AND it DIDN'T wipe my device, I've yet to check whether the device is still rooted - it probably isn't. Any advice as to the best custom recovery out there for my international s5?
Edit: SuperSU says my device is no longer rooted, I guess it's okay to flash CF-Auto-Root again?
Edit: I flashed the auto-root again and it's rooted, I just need to be more careful with an updated custom recovery.