This is me, using stock ROM GB 2.3.3 v20G, rooted.
After awhile I learned that stock ROM can be overclocked by flashing custom kernel from CWM. So I did it, using paoloM70 and francoV1.1, my P500 now can be overclocked.
However, I want to have a flashable stock kernel for a backup, but I can't find it anywhere
well at least I've already tried googling and thread searching here using keyword "stock kernel"...I don't know the actual code version.
Will someone please help me find stock kernel and post a link in here?
Even better if we have stock kernel files for Froyo and GB, I'd like to see those.
Thanks in advance.
optimuswhite said:
This is me, using stock ROM GB 2.3.3 v20G, rooted.
After awhile I learned that stock ROM can be overclocked by flashing custom kernel from CWM. So I did it, using paoloM70 and francoV1.1, my P500 now can be overclocked.
However, I want to have a flashable stock kernel for a backup, but I can't find it anywhere
well at least I've already tried googling and thread searching here using keyword "stock kernel"...I don't know the actual code version.
Will someone please help me find stock kernel and post a link in here?
Even better if we have stock kernel files for Froyo and GB, I'd like to see those.
Thanks in advance.
Click to expand...
Click to collapse
stock kernel is not availible as a zip,, you need to reflash your stock ROM usind kdz in order to get it back... and i'll recommend you to stay with franco.kernel for gingerbread if you're using stock ROM as it's the best.... else you can flash cm7 6.5.8 which is the best ROM for p500.........
_______________________
DONT FORGET TO THANK ME IF MY ADVICE WAS HELPFUL FOR YOU )
extract it from the official LG boot.img. You'll need zImage and modules. Replace the ones in Paulo's .zip and viola, stock flashable kernel.
optimuswhite said:
This is me, using stock ROM GB 2.3.3 v20G, rooted.
After awhile I learned that stock ROM can be overclocked by flashing custom kernel from CWM. So I did it, using paoloM70 and francoV1.1, my P500 now can be overclocked.
However, I want to have a flashable stock kernel for a backup, but I can't find it anywhere
well at least I've already tried googling and thread searching here using keyword "stock kernel"...I don't know the actual code version.
Will someone please help me find stock kernel and post a link in here?
Even better if we have stock kernel files for Froyo and GB, I'd like to see those.
Thanks in advance.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1212140
---------- Post added at 01:07 AM ---------- Previous post was at 12:58 AM ----------
thanks to doc
thanks yannis11 and others...
I wonder why I can't find that thread before
yannis11 said:
http://forum.xda-developers.com/showthread.php?t=1212140
---------- Post added at 01:07 AM ---------- Previous post was at 12:58 AM ----------
thanks to doc
Click to expand...
Click to collapse
Thanks very much
yannis11 said:
http://forum.xda-developers.com/showthread.php?t=1212140
---------- Post added at 01:07 AM ---------- Previous post was at 12:58 AM ----------
thanks to doc
Click to expand...
Click to collapse
Thanks!
Related
So i upgraded my european GalaxyS II to Android 4.0.3 (ICS) and i want to root it.
The thing i was wondering was, what insecure kernel should i use? Or does the kernel even matter?
My current kernel is:3.0.15-I9100XWLP7
Thanks in advance!
-olawp
http://forum.xda-developers.com/showthread.php?t=1103399
Can i install clockwork and cyanogen with this root?
olawp said:
Can i install clockwork and cyanogen with this root?
Click to expand...
Click to collapse
Clockwork comes with cfroot.
Yes you can flash cm9 using cwm
Sent from my GT-I9100 using Tapatalk 2
By flashing an insecure kernel, you will get clockwork mod recovery boot menu.
You can flash cyanogen by finding the zip, full wipe (look up instructions, not sure if needed). Or just get a CM9 based rom like D4.
Sent from my GT-I9100
So no safe stable ICS Cyanogenmod yet?
Or
Or an aopk based rom like Hydrog3n
Imperiale said:
By flashing an insecure kernel, you will get clockwork mod recovery boot menu.
You can flash cyanogen by finding the zip, full wipe (look up instructions, not sure if needed). Or just get a CM9 based rom like D4.
Sent from my GT-I9100
Click to expand...
Click to collapse
---------- Post added at 10:50 PM ---------- Previous post was at 10:47 PM ----------
olawp said:
So no safe stable ICS Cyanogenmod yet?
Click to expand...
Click to collapse
They dont want to release it as stable yet, but the nighlies i've tried are working really good. Check the q&a thread of cm9, theres not alot on the not working list.
Ive heard that if you use CF root you cant install rom manager, is this true?
I have no clue, but from what I understand it is not really necessary (you can already backup, restore, update within CWM) so why even bother with another app? Just my two cents.
Re cyanogen, I think pretty much everything is working except HDMI out. Nevertheless I highly recommend a rom based on CM9 or aokp as someone else said.
Sent from my GT-I9100
olawp said:
Ive heard that if you use CF root you cant install rom manager, is this true?
Click to expand...
Click to collapse
While this is true,i wouldn't try it to be honest.. Allot of phones were bricked using rom manager :/
Just sick to cwm recovery menu it has everything you may possibly need.
Sent from my GT-I9100 using XDA
Hi everyone,
I am using Galaxy S3 GT-I9300 and I have rooted my stock ROM and installed the paranoid android 2.+ . After installation and wiping factory settings and cache; when I rebooted my device, its showing a paranoid icon for hours. Nothing has happened after that and its still showing the same icon. How i have to proceed to complete installation or go back to stock ROM. Please help
What stock firmware were you using??
Sent from my GT-I9300 using xda premium
http://forum.xda-developers.com/showthread.php?t=1909868
Try this before flashing the rom, seems to help most people
I guess this has something to do with your previous ROM. Were you using any leaked stock JB based ROM?
Oh and btw, don't worry, nothing has gone wrong with your phone. You'll be able to get it back working
---------- Post added at 01:24 PM ---------- Previous post was at 01:19 PM ----------
I guess this has something to do with your previous ROM. Were you using any leaked stock JB based ROM?
Oh and btw, don't worry, nothing has gone wrong with your phone. You'll be able to get it back working
speedyjay said:
What stock firmware were you using??
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
Hi.. I was using a leaked unofficial CM10 ROM. I tried and moved to recovery mode at last and installed the paranoid android again and wiped out the previous data. Now its working fine ..
xRenzo said:
http://forum.xda-developers.com/showthread.php?t=1909868
Try this before flashing the rom, seems to help most people
Click to expand...
Click to collapse
Yeah it helped me a lot.:good: thanks for the link.
Saketme said:
I guess this has something to do with your previous ROM. Were you using any leaked stock JB based ROM?
Oh and btw, don't worry, nothing has gone wrong with your phone. You'll be able to get it back working
---------- Post added at 01:24 PM ---------- Previous post was at 01:19 PM ----------
I guess this has something to do with your previous ROM. Were you using any leaked stock JB based ROM?
Oh and btw, don't worry, nothing has gone wrong with your phone. You'll be able to get it back working
Click to expand...
Click to collapse
what shall I do if the screen blacks out after flashing a zip file ? Do I have to install the ROM again and wipe out everything ? Pls help
Premdrums said:
what shall I do if the screen blacks out after flashing a zip file ? Do I have to install the ROM again and wipe out everything ? Pls help
Click to expand...
Click to collapse
Is the Parandroid question and answers thread closed ????
Logic says thats where you look for answers .
jje
I just bought a DNA and it currently has viper rom 1.2.0 on it. It is rooted, but is s-on, I really don't know if it has CWM or even how to tell? I am using straight talk on it and cant seem to get MMS to work, but it looks like Virtuous rom works with straight talk MMS. I am really not sure where I need to pick up on one of these guides just to flash a rom. Is that all I need to do to get it switched over? Sorry if these questions are easy/noob I really would rather just not brick this phone =)
Look in the general section and the original development sections for guides and pretty much any phone forum for guides. They will do a better job of explaining than me. You cant have a custom kernel on viper 1.2 and it for sure either has CWM or TWRP.
If you are s on, you have to download the zip of the Rom or kernel you want. Next, download flash gui on the market. Select the Rom or zip and it will flash the boot image. On a kernel, extract the modules and flash in recovery. For Roms, flash the zip after you flash the boot.img. try all that out, then look in the original development section for rooting and s-off. Hope this helps!
---------- Post added at 08:15 PM ---------- Previous post was at 08:13 PM ----------
Download the "tweakker" app from the market as well. It solves many mms issues across roms.
---------- Post added at 08:18 PM ---------- Previous post was at 08:15 PM ----------
Also, to fix the mms issue, download the "tweakker" app from the market. Follow instructions to get mms working again
kushmacdaddy said:
If you are s on, you have to download the zip of the Rom or kernel you want. Next, download flash gui on the market. Select the Rom or zip and it will flash the boot image. On a kernel, extract the modules and flash in recovery. For Roms, flash the zip after you flash the boot.img. try all that out, then look in the original development section for rooting and s-off. Hope this helps!
---------- Post added at 08:15 PM ---------- Previous post was at 08:13 PM ----------
Download the "tweakker" app from the market as well. It solves many mms issues across roms.
---------- Post added at 08:18 PM ---------- Previous post was at 08:15 PM ----------
Also, to fix the mms issue, download the "tweakker" app from the market. Follow instructions to get mms working again
Click to expand...
Click to collapse
Alright, I have a few additional questions then I guess, I have the Virtuous rom downloading, as well as the flash gui app. You say flash the zip after i flash the boot.img. I'm not sure exactly what you mean when you say that? Do I need to download an additional file or will the boot.img file show up in fastboot after I flash it with the gui app? Am I correct in that I should just be able to flash the virtuous rom without needing to flash a kernel also?
smackey said:
Alright, I have a few additional questions then I guess, I have the Virtuous rom downloading, as well as the flash gui app. You say flash the zip after i flash the boot.img. I'm not sure exactly what you mean when you say that? Do I need to download an additional file or will the boot.img file show up in fastboot after I flash it with the gui app? Am I correct in that I should just be able to flash the virtuous rom without needing to flash a kernel also?
Click to expand...
Click to collapse
It probably comes with a stock kernel and you can flash your own if its NOT based on 2.04.
123421342 said:
It probably comes with a stock kernel and you can flash your own if its NOT based on 2.04.
Click to expand...
Click to collapse
It is NOT 2.04, I made very sure of that when buying it after I bought the first one that was =x, luckily I got a killer deal on each of these so I'll make money reselling the 2.04 one.
smackey said:
It is NOT 2.04, I made very sure of that when buying it after I bought the first one that was =x, luckily I got a killer deal on each of these so I'll make money reselling the 2.04 one.
Click to expand...
Click to collapse
He was talking about the rom, not your phone. If the rom us based off 2.04, such as viper, you can't flash a custom kernel.
Sent from my HTC6435LVW using xda app-developers app
Bigandrewgold said:
He was talking about the rom, not your phone. If the rom us based off 2.04, such as viper, you can't flash a custom kernel.
Sent from my HTC6435LVW using xda app-developers app
Click to expand...
Click to collapse
Ah, it wasn't 2.04, I got it flashed to Virtuous but now it's not letting me set APN, I've found fixes for the T-Mobile straight talk using market enabler but nothing for the ATT side of straight talk =(
Hi i have a problem with my tab SC-01C docomo Galaxy Tab P1000, i cant flash overcome 4.0 with my tablet when i try to use ODIN it keeps on failing and stops in Boot.bin and will bricked, btw its Gingerbread OMKE2 already, i dont know if my bootloader is lock or what, i saw somethread here that if its already gingerbread dont use the loader because it can mess up the system, so please tell me what should i do. :crying:
rence.slvdr said:
Hi i have a problem with my tab SC-01C docomo Galaxy Tab P1000, i cant flash overcome 4.0 with my tablet when i try to use ODIN it keeps on failing and stops in Boot.bin and will bricked, btw its Gingerbread OMKE2 already, i dont know if my bootloader is lock or what, i saw somethread here that if its already gingerbread dont use the loader because it can mess up the system, so please tell me what should i do. :crying:
Click to expand...
Click to collapse
Put a link to the ROM thread so I can see if you need an ICS boot loader or any other prerequisites... I don't have this device..but I'd be more than happy to help you track down the issue
Gil81 said:
Put a link to the ROM thread so I can see if you need an ICS boot loader or any other prerequisites... I don't have this device..but I'd be more than happy to help you track down the issue
Click to expand...
Click to collapse
Here it is http://forum.xda-developers.com/showthread.php?t=2174247
rence.slvdr said:
Here it is http://forum.xda-developers.com/showthread.php?t=2174247
Click to expand...
Click to collapse
OK..from what I see. I'm betting you have a bad download. Try to download the kernel again and flash it. If you're tab is up and running you can grab the zip and flash it from recovery...just wipe cache and dalvik cache...flash kernel..but you need to make sure that kernel will boot with the ROM you have flashed...
If you're looking to just upgrade to the newest version of overcome. I would suggest you to get the zip file..wipe data,cache,dalvik cache and format system...then flash the ROM zip from recovery...
Also...are you're recoveries on this device separate from you're kernel or tied together...
---------- Post added at 10:27 AM ---------- Previous post was at 10:12 AM ----------
Edit...I just read that if you trying to flash cm 10.1...you need to restock because of the partition changes...
Gil81 said:
OK..from what I see. I'm betting you have a bad download. Try to download the kernel again and flash it. If you're tab is up and running you can grab the zip and flash it from recovery...just wipe cache and dalvik cache...flash kernel..but you need to make sure that kernel will boot with the ROM you have flashed...
If you're looking to just upgrade to the newest version of overcome. I would suggest you to get the zip file..wipe data,cache,dalvik cache and format system...then flash the ROM zip from recovery...
Also...are you're recoveries on this device separate from you're kernel or tied together...
Click to expand...
Click to collapse
Maybe i need to download new krnel, ill tell you if that will work, thanks, actually im new with flashing so i cant seem to recognize whats the difference between rom and kernel
rence.slvdr said:
Maybe i need to download new krnel, ill tell you if that will work, thanks, actually im new with flashing so i cant seem to recognize whats the difference between rom and kernel
Click to expand...
Click to collapse
OK...I suggest doing some more reading...I know it can be a pain..but with an old device its a must..good luck and let me now how it goes..
Gil81 said:
OK...I suggest doing some more reading...I know it can be a pain..but with an old device its a must..good luck and let me now how it goes..
Click to expand...
Click to collapse
i Already downloaded a new one, still no signs of luck. it fails again. in boot.bin
rence.slvdr said:
i Already downloaded a new one, still no signs of luck. it fails again. in boot.bin
Click to expand...
Click to collapse
OK...I'm not familiar with this device so let me do some more reading...Lol. I seen something about a restock...I'll get back to ya...later tonight..
---------- Post added at 08:00 PM ---------- Previous post was at 07:56 PM ----------
rence.slvdr said:
i Already downloaded a new one, still no signs of luck. it fails again. in boot.bin
Click to expand...
Click to collapse
Second or third paragraph in the guide you linked me to...
Also, based on experience, if you want to upgrade to other ROMs in the future you will have to keep your stock GB ROM file, your gt-p1000_mr.pit, the dbdata.tar and the entire Overcome kit (kernel and ROM). You will need all of them in the future because I've found that to install a new ROM you have to repeat the entire process of restocking to GB, then installing Overcome Kernel and ROM, then installing whatever ROM you want. It sucks, but it's the only way I've seen so far.
My take on this is that you need to go back to stock GB...then overcome...I'll read more to make sure..just thought I'd share this real quick as I just seen it..
---------- Post added at 08:05 PM ---------- Previous post was at 08:00 PM ----------
rence.slvdr said:
i Already downloaded a new one, still no signs of luck. it fails again. in boot.bin
Click to expand...
Click to collapse
Read that guide you linked...man. The answers are there for you...I just read some more of it...
But basically...you need to go back to GB...but first you need to flash the pit file from Odin to repartition the partitions...then Odin the GB ROM ...then overcome..its all in that guide...read...read...read.
If you have any questions about the the process let me know...
Gil81 said:
OK...I'm not familiar with this device so let me do some more reading...Lol. I seen something about a restock...I'll get back to ya...later tonight..
---------- Post added at 08:00 PM ---------- Previous post was at 07:56 PM ----------
Second or third paragraph in the guide you linked me to...
Also, based on experience, if you want to upgrade to other ROMs in the future you will have to keep your stock GB ROM file, your gt-p1000_mr.pit, the dbdata.tar and the entire Overcome kit (kernel and ROM). You will need all of them in the future because I've found that to install a new ROM you have to repeat the entire process of restocking to GB, then installing Overcome Kernel and ROM, then installing whatever ROM you want. It sucks, but it's the only way I've seen so far.
My take on this is that you need to go back to stock GB...then overcome...I'll read more to make sure..just thought I'd share this real quick as I just seen it..
---------- Post added at 08:05 PM ---------- Previous post was at 08:00 PM ----------
Read that guide you linked...man. The answers are there for you...I just read some more of it...
But basically...you need to go back to GB...but first you need to flash the pit file from Odin to repartition the partitions...then Odin the GB ROM ...then overcome..its all in that guide...read...read...read.
If you have any questions about the the process let me know...
Click to expand...
Click to collapse
Oh i have read it again, and it says, Go to Step 7, Step 7 is to flash the Kernel, i already in the ORIGINAL GB Stock rom is that okay? to flash overcome kernel or Flash the GB Stock safe v5 then flash the kernel?
rence.slvdr said:
Oh i have read it again, and it says, Go to Step 7, Step 7 is to flash the Kernel, i already in the ORIGINAL GB Stock rom is that okay? to flash overcome kernel or Flash the GB Stock safe v5 then flash the kernel?
Click to expand...
Click to collapse
If you're on stock GB .. I would assume you can flash overcome...that's how I read it...but flash the ROM. It has the kernel in it. I don't know if the overcome kernel will boot on stock GB. I didn't read that far. Maybe its a GB kernel. If it is..you can flash it..I assume.
You know what..give me a second and I'll read a bit more...don't want ya getting messed up..
---------- Post added at 11:16 PM ---------- Previous post was at 10:53 PM ----------
rence.slvdr said:
Oh i have read it again, and it says, Go to Step 7, Step 7 is to flash the Kernel, i already in the ORIGINAL GB Stock rom is that okay? to flash overcome kernel or Flash the GB Stock safe v5 then flash the kernel?
Click to expand...
Click to collapse
Man...there is a great guide with pics if you click on the Google docs link...anyway.
You need to flash the overcome 4.0 kernel tar using Odin...let it do its thing..it changing system files. It will boot. After it up...boot to that recovery and flash the wipe all zip( put this on youre device before you flash the kernel )..reboot. You should now be able to flash any ROM you want from this setup..
Gil81 said:
If you're on stock GB .. I would assume you can flash overcome...that's how I read it...but flash the ROM. It has the kernel in it. I don't know if the overcome kernel will boot on stock GB. I didn't read that far. Maybe its a GB kernel. If it is..you can flash it..I assume.
You know what..give me a second and I'll read a bit more...don't want ya getting messed up..
---------- Post added at 11:16 PM ---------- Previous post was at 10:53 PM ----------
Man...there is a great guide with pics if you click on the Google docs link...anyway.
You need to flash the overcome 4.0 kernel tar using Odin...let it do its thing..it changing system files. It will boot. After it up...boot to that recovery and flash the wipe all zip( put this on youre device before you flash the kernel )..reboot. You should now be able to flash any ROM you want from this setup..
Click to expand...
Click to collapse
Thanks, ill try it right away ill give you feedback after
Gil81 said:
If you're on stock GB .. I would assume you can flash overcome...that's how I read it...but flash the ROM. It has the kernel in it. I don't know if the overcome kernel will boot on stock GB. I didn't read that far. Maybe its a GB kernel. If it is..you can flash it..I assume.
You know what..give me a second and I'll read a bit more...don't want ya getting messed up..
---------- Post added at 11:16 PM ---------- Previous post was at 10:53 PM ----------
Man...there is a great guide with pics if you click on the Google docs link...anyway.
You need to flash the overcome 4.0 kernel tar using Odin...let it do its thing..it changing system files. It will boot. After it up...boot to that recovery and flash the wipe all zip( put this on youre device before you flash the kernel )..reboot. You should now be able to flash any ROM you want from this setup..
Click to expand...
Click to collapse
Sir im very thankful to you because you help me i already did it and it works my Model Change to P-1000 from SC-01C.. now i already did it do you have some idea how can change it to CM9?
rence.slvdr said:
Sir im very thankful to you because you help me i already did it and it works my Model Change to P-1000 from SC-01C.. now i already did it do you have some idea how can change it to CM9?
Click to expand...
Click to collapse
Read the op for the cm ROM you want to install...I don't know which one you want and there are many variants out there...or send me a link to the ROM..
Also...are you flashing cm 9 just to check it out....because I seen a lot of JB ROMs in you're devices ROM thread...
FYI.,..that really where you should have post( q&a thread for galaxy tab ) but its cool...I'll help. Send me that ROM link
Gil81 said:
Read the op for the cm ROM you want to install...I don't know which one you want and there are many variants out there...or send me a link to the ROM..
Also...are you flashing cm 9 just to check it out....because I seen a lot of JB ROMs in you're devices ROM thread...
FYI.,..that really where you should have post( q&a thread for galaxy tab ) but its cool...I'll help. Send me that ROM link
Click to expand...
Click to collapse
As i already convert my tab to P1000 ill try this one.. http://www.symbianize.com/showthread.php?t=780905 and give you feedback if this works.
Gil81 said:
Read the op for the cm ROM you want to install...I don't know which one you want and there are many variants out there...or send me a link to the ROM..
Also...are you flashing cm 9 just to check it out....because I seen a lot of JB ROMs in you're devices ROM thread...
FYI.,..that really where you should have post( q&a thread for galaxy tab ) but its cool...I'll help. Send me that ROM link
Click to expand...
Click to collapse
Sir im glad you help me i already make it CM9, i learned that in order to make it happen i should read and read before doing it. and now i did it:good: Thank you..
What did i do before i get to CM9:
Model Number: SC-01C
Gingerbread 2.3.3 OMKE2
1st: Flash Kernel and Rom with Overcome without flashing GB Stock Safe v5
2nd: Flash the CM9 twice as it will install the CMW first then the second is the rom,
3rd: Patience and it will Success
And also thanks to OneClick Unbrick it helps alot.
rence.slvdr said:
Sir im glad you help me i already make it CM9, i learned that in order to make it happen i should read and read before doing it. and now i did it:good: Thank you..
What did i do before i get to CM9:
Model Number: SC-01C
Gingerbread 2.3.3 OMKE2
1st: Flash Kernel and Rom with Overcome without flashing GB Stock Safe v5
2nd: Flash the CM9 twice as it will install the CMW first then the second is the rom,
3rd: Patience and it will Success
And also thanks to OneClick Unbrick it helps alot.
Click to expand...
Click to collapse
Glad you're up...its so funny... I was just checking this thread to tell you about the needed double flash..Lol.
You ninja'd me...good work.
Gil81 said:
Glad you're up...its so funny... I was just checking this thread to tell you about the needed double flash..Lol.
You ninja'd me...good work.
Click to expand...
Click to collapse
Hahaha thanks for your help sir, btw I'm new here,, how to mark this thread as solve?)
problem in converting SC-O1C to P1000
rence.slvdr said:
Sir im very thankful to you because you help me i already did it and it works my Model Change to P-1000 from SC-01C.. now i already did it do you have some idea how can change it to CM9?
Click to expand...
Click to collapse
Model Change to P-1000 from SC-01C., How is this done? Please help me.... ty ty ty
Stock and lagging as heck. I have always rooted and am almost done with rooting the TMO S5. I am looking for a rom that is complete and does not lag. I have always used the Stock roms on my other samsung verizon phones and felt the most comfortable with them.
Which is the Fastest lag free rom for the TMO s5 and closest to stock minus bloatware etc.
Thanks in advance.
Do you need wifi calling if not then
Use my maverick rom v4 on international thread it had s6 features because it is a port
If you need WiFi calling use my area 51 rom I update fast
Sent from my SM-G903F using Tapatalk
---------- Post added at 04:07 PM ---------- Previous post was at 04:05 PM ----------
However their is a rom by raname that is debloated on tmobile android development and is pretty fast but I haven't seen him in a while
They are plenty roms on international just find one you feel that suits you
My answer will always be bias
Sent from my SM-G903F using Tapatalk
malbert16442 said:
Do you need wifi calling if not then
Use my maverick rom v4 on international thread it had s6 features because it is a port
If you need WiFi calling use my area 51 rom I update fast
Sent from my SM-G903F using Tapatalk
---------- Post added at 04:07 PM ---------- Previous post was at 04:05 PM ----------
However their is a rom by raname that is debloated on tmobile android development and is pretty fast but I haven't seen him in a while
They are plenty roms on international just find one you feel that suits you
My answer will always be bias
Sent from my SM-G903F using Tapatalk
Click to expand...
Click to collapse
I travel a lot internationally for work. so wifi calling is important to me. I will try the area 51.
Thanks, I want to support the guy that made the hispasian kernel how do i do that.?
i am on f0j4 to use your area51 rom do i need to be on og6? is flashing back as simple as using the bootloader and stock modem tar's in odin and flash back? Then can I flash the v9.6 of your rom onto my phone through odin as well using the pds button? or do i need to find a 0g6 version of the rom and flash that first?
ccommcomm said:
i am on f0j4 to use your area51 rom do i need to be on og6? is flashing back as simple as using the bootloader and stock modem tar's in odin and flash back? Then can I flash the v9.6 of your rom onto my phone through odin as well using the pds button? or do i need to find a 0g6 version of the rom and flash that first?
Click to expand...
Click to collapse
area51 is oj4. if you want to support hispasian kernel you can flash it over the kernel used in 51. You might need to install the correct supersu but i would think it would work fine.
---------- Post added at 06:37 PM ---------- Previous post was at 06:36 PM ----------
hispasian kernel v8 i believe
destructionj said:
area51 is oj4. if you want to support hispasian kernel you can flash it over the kernel used in 51. You might need to install the correct supersu but i would think it would work fine.
---------- Post added at 06:37 PM ---------- Previous post was at 06:36 PM ----------
hispasian kernel v8 i believe
Click to expand...
Click to collapse
I got rooted I am just getting ready to flash the new rom. I used the hispasian kernel and sent him some love.
I don't need to stay with it if there is something better to run with the area 51 rom.
My question now is as follows? I already am running f0j4 do i need to flash the stock modem and bootloader? Can I just skip those steps and go straight to the odin and flash the rom?
ccommcomm said:
I got rooted I am just getting ready to flash the new rom. I used the hispasian kernel and sent him some love.
I don't need to stay with it if there is something better to run with the area 51 rom.
My question now is as follows? I already am running f0j4 do i need to flash the stock modem and bootloader? Can I just skip those steps and go straight to the odin and flash the rom?
Click to expand...
Click to collapse
I guess it would depend on the method that was used for getting the phone to OJ4.
If it was a full install then your bootloader is OJ4 which the area51 is based off of.
My modem and bootloader is OJ4 however others have said OG6 works as well too.
If your OG6 or OJ4 then you dont need to flash a modem or bootloader.
Also Area51 and 9.6 are flashed in custom recovery not odin.
destructionj said:
I guess it would depend on the method that was used for getting the phone to OJ4.
If it was a full install then your bootloader is OJ4 which the area51 is based off of.
My modem and bootloader is OJ4 however others have said OG6 works as well too.
If your OG6 or OJ4 then you dont need to flash a modem or bootloader.
Also Area51 and 9.6 are flashed in custom recovery not odin.
Click to expand...
Click to collapse
I got to Oj4 by OTA I assume. When I bought the phone off of Craigslist it came this way.
I maybe confused in regards to V9.6 and Area 51. I though that Area 51 was the rom and it was currently in Version 9.6.
I have downloaded it from the download tab on this forum link. http://forum.xda-developers.com/tmo...t/maverick-5-1-1-improved-edition-v2-t3159387
It says it is version 1 when I download it. Area 51 v1.zip to be precise.
I was also planning on following the instructions on this page #3 forum post to flash the rom. Is this wrong? Am I going in the wrong direction?
ccommcomm said:
I got to Oj4 by OTA I assume. When I bought the phone off of Craigslist it came this way.
I maybe confused in regards to V9.6 and Area 51. I though that Area 51 was the rom and it was currently in Version 9.6.
I have downloaded it from the download tab on this forum link. http://forum.xda-developers.com/tmo...t/maverick-5-1-1-improved-edition-v2-t3159387
It says it is version 1 when I download it. Area 51 v1.zip to be precise.
I was also planning on following the instructions on this page #3 forum post to flash the rom. Is this wrong? Am I going in the wrong direction?
Click to expand...
Click to collapse
Post 3 is not needed if you are on OJ4 already. Area51 and 9.6 are different roms. you do need to flash in twrp and install the rom from within twrp.
so step 4 and 5.
malbert16442 said:
Step 4
Close and then reopen Odin, pull the battery for 30 seconds, pop back in and boot into download mode all with your phone disconnected from your computer. Now grab the TWRP recovery image from here https://dl.twrp.me/klte/ (I use 2.8.7.0) and place into the PDA button inside odin, uncheck F Reset Time and Repartition then flash or click start.
Step 5
When step 4 completes, now you can do the 3 finger boot into TWRP recovery to flash V9.4 of this ROM.
Click to expand...
Click to collapse
However post 3 is old you would flash area51
Just for future reference. This section is only for developing. There is a Q&A section where you can post for questions like this. No offense but people always go crazy when others post in the wrong section.