I'm working on creating a clean dump of system.img, recovery.img, and boot.img. That way whoever wishes to test it can do so. It is based the olleh update release. I'll post the finished work in the next few days. cheers
GThanks)
Sent from my Dell Venue using XDA App
I've tried every method out and every other ugly hack to no avail. I do have an image of 2.2.1 with all crapware removed, rooted and tweaked up for performance if anyone is interested.
I would have released a 2.2.x rom a while ago, if it wasnt for the fact that there's no common rom unlike the streak.
I believe the venue has the 'blinking leds' issue like the streak if your rom doesnt match your baseband, hence you'd need to make like half a dozen versions for each rom.
I dont like the idea of forcing everyone to migrate to 319 just for a slimmed down rom since that's the only one with a pkg available
Starting from 325, I also flashed my device back to 319 and then upgrade to Olleh 407 like Omnichron did. I notice "blinking leds" issue happened twice since then. What I can do is remove the battery and plug it in again. Still experiencing the new upgrade!
tuan.dsnq said:
Starting from 325, I also flashed my device back to 319 and then upgrade to Olleh 407 like Omnichron did. I notice "blinking leds" issue happened twice since then. What I can do is remove the battery and plug it in again. Still experiencing the new upgrade!
Click to expand...
Click to collapse
Where did you get the package for the 407 ROM?
Have you tried this method for root?
Sorry marvin02, that's actually 406, not 407. The link to 406 was posted in another thread (Venue for GB, right?).
tuan.dsnq,
Thanks - I saw the 406 ROM.
The root method I linked to uses zergRush. You can just put the latest zergRush exploit (from that thread) into the exploits folder of SOC 2.2 to use it (SOC has an older version). That's how I rooted my Vizio tablet.
I used the latest zergRush exploit v3 but can't ROOT Dell VENUE 2.3.3 Olleh 406
Check out this thread and maybe it is legit this time: http://forum.xda-developers.com/showthread.php?t=1354393
Related
Seen alot of blogs explaining how to update the android of Dell streak phones from AT&T and O2 but none for the Rogers with build number 7921.
Well i spent some time when i got my new phone to find out how to do it and to my surprise it was hard to find how to but easy to actually do it.
Only to follow 2 different site tutorials to get this done.
1. Follow the last part of the tutorial to get your streak to version 6601 ATT&T
after this phrase "If you just wanted to revert to O2 1.6 (build 4399) then you are done. If you are going to AT&T 1.6 (build 6601) we have to change the system so it will upgrade the the AT&T ROM."
http://forum.xda-developers.com/showthread.php?t=805112
once you got your streak to 1.6 ATT&T build 6601 you must follow a simple tutorial with interactive video and even has a video so you can make it work with your win7 X64 witch alot of tutorials don't help with.
2. Follow this part to the letter and if you have trouble they have a FAQ section and even supply all the files you need.
QDLTool Visual Tutorials (for Windows only)
http://streakdroid.com/?page_id=92
In this second part all you have to do in general is set up all your needed drivers and stuff in windows then open the program and press RUN. Just make sure you do all the steps without missing one.
No need to go through the fastboot or recovery menu in this part.
And it gives you Full US version of android 2.2 from a locked version of Rogers android 1.6.
Hope this will help my fellow Canadian Streakers
Thanks for Taking time to do this for fellow streakers
lufc said:
Thanks for Taking time to do this for fellow streakers
Click to expand...
Click to collapse
No problem. It's my first one ever so i hope i passed to hole point and helped some (dell irritated) people.
Actually, all you need is the 2nd step - QDLTool doesn't require any specific version installed on the phone.
Glad you like the visual tutorials .. let me know if theres anything I can do to improve them.
kantras said:
Actually, all you need is the 2nd step - QDLTool doesn't require any specific version installed on the phone.
Glad you like the visual tutorials .. let me know if theres anything I can do to improve them.
Click to expand...
Click to collapse
The only problem i have now is i can't seem to change or hear the notification when i go into the menu to see them.
Also i heard the gps doesn't work on some models but i haven't inserted the sim card because i'm waiting for the rebel to come in the mail but without the sim card the gps doesn't work for me.
The notifications setting and brightness are fixed in steves newest rom
Sent From My Rooted Dell Streak Using Xda App
ok i see i can upgrade to steve's 1.5.3 only thing is do i use the one with AMSS or the V2.1 baseband
I'm unlocking it with a Rebel simcard
In the guid (Beyond QDLTool) it says to use 1.5.3 + AMSS 1.5.1+. But i have read here and there that if your using the rebel simcard you have to use the No baseband one. So do i use the 1.5.3 no baseband and use the AMSS 1.5.1+ and follow all in the guide or do i juste use the 1.5.3 no baseband and skip the AMSS 1.5.1+ in the guide?
alexmoi said:
In the guid (Beyond QDLTool) it says to use 1.5.3 + AMSS 1.5.1+. But i have read here and there that if your using the rebel simcard you have to use the No baseband one. So do i use the 1.5.3 no baseband and use the AMSS 1.5.1+ and follow all in the guide or do i juste use the 1.5.3 no baseband and skip the AMSS 1.5.1+ in the guide?
Click to expand...
Click to collapse
im not 100% but i think you just need to flash the no baseband version thats it , you could ask that in the thread for that rom just to be certain
Hey...I have the rogers streak and was wondering if I update to dj steve's custom rom will i run into issues when the actual Rogers 2.2 comes out? Will I be able to put the stock version back on? I am a bit worried for warranty purposes as well...can it be brought back to stock or is it a one way ticket? Reason I ask is I also have several phones including a Rogers Acer liquid e and unfortunetly can't go back to the stock version of froyo because of some thing Acer and Rogers did in the update that recognizes the fact my phone was rooted and not running a rogers baseband or something like that...I just sold my Galaxy s because I was sick of dealing with Samsung and their issues....So from what I can tell Rogers is only releasing the froyo update in late spring and 3-4 months is crazy considering most of the other countries already have froyo on their streaks...Man Rogers is so bad for their updates...Anyways...can i temporarily update to the leaked versions or should I wait? Thanks
maek_it_happen said:
im not 100% but i think you just need to flash the no baseband version thats it , you could ask that in the thread for that rom just to be certain
Click to expand...
Click to collapse
you are correct. if you want to use the rebelsim, you HAVE TO use the no baseband version. 1.5.3 is the latest version
thanks for the great guide, I just got mine today and its already running 2.2 on 318 baseband
its true that u can qdl from any version though so I went straight from 1.6 to 2.2 prerelease then to 318 using the link in the streakdroid guide for beyond qdl
Sent from my Dell Streak using XDA App
Thanks to the OP, I updated my Rogers Streak from stock 1.6 to 2.2 to StreakDroid 1.6 yesterday!
Despite my reservations, it couldn't have been easier. I used the QDLTool to jump from 1.6 to 2.2 directly, and I then followed the additional instructions on the StreakDroid site to flash the rom. The hardest part was installing ClockworkMod Recovery prior to all that to do a rom backup. For some reason it took many tries to get it to hold, but eventually it worked.
Unfortunately I may be in the minority but I dislike the new homescreen layout. I still haven't found a way to get icons and widgets to stay close together like they did in the stock 1.6 version.
Hi guys,
I guess i have bricked the device while updating to 2.2.
As far as i know i have done nothing wrong i followed the Guide step by Step and Downgrade to AT&T firmware as the first guide in this post.
While i was running QLDtool it errored out and Turned off by itself. After since i have tried everything and the Device just Doesn't have power anymore. Pluging into wall socket is not giving anything either.
Any thoughts on this?? Any Help will be appreciated.
Archeob said:
Unfortunately I may be in the minority but I dislike the new homescreen layout. I still haven't found a way to get icons and widgets to stay close together like they did in the stock 1.6 version.
Click to expand...
Click to collapse
from what i understand, you need a launcher that can let you edit the number or rows and columns on each homescreen, im currently using launcher pro and have 8 columns and 6 rows in landscape. hope this helps as im a new user too so not sure if this is what you meant
rptw said:
from what i understand, you need a launcher that can let you edit the number or rows and columns on each homescreen, im currently using launcher pro and have 8 columns and 6 rows in landscape. hope this helps as im a new user too so not sure if this is what you meant
Click to expand...
Click to collapse
You're exactly right. I spent an hour reinstalling StreakDroid 1.6.0 with different DPI settings before giving up in frustration, but I found the settings menu for ADW the next day. I used a 6 x 6 grid and disabled automatic stretching, and that way my picture frames look perfect.
Great work on the rom guys! My Streak feels much more smooth and responsive than under stock 1.6.
Andy you shouldn't have a problem as long as you get a copy of the Update.pig you should be able to revert back.
Archeob said:
Thanks to the OP, I updated my Rogers Streak from stock 1.6 to 2.2 to StreakDroid 1.6 yesterday!
Despite my reservations, it couldn't have been easier. I used the QDLTool to jump from 1.6 to 2.2 directly, and I then followed the additional instructions on the StreakDroid site to flash the rom. The hardest part was installing ClockworkMod Recovery prior to all that to do a rom backup. For some reason it took many tries to get it to hold, but eventually it worked.
Unfortunately I may be in the minority but I dislike the new homescreen layout. I still haven't found a way to get icons and widgets to stay close together like they did in the stock 1.6 version.
Click to expand...
Click to collapse
Also check your density on the 1.6 streakdroid install. when i used us120 or denisty120- -160 they were to far apart. i also found that US180 didn't work the phone wouldn't boot. i had to use density180 vs us180 and everything is perfect. right amount of space. i installed just gingerbread stock launcher and im using the adw ex launcher its the best in my eyes.
cue_32 said:
Andy you shouldn't have a problem as long as you get a copy of the Update.pig you should be able to revert back.
Click to expand...
Click to collapse
Thanks...I still may wait though...I rooted my Acer liquid e and also just picked up a Samsung Captivate to play with and use as a back up..streak is so big...lol..nice to have a phone that fits in your pocket..... and since selling my GTi9000 i kind of missed it.....I love the streak and really don't want to void the warranty or better yet brick either...I am going to treat my captivate to the lagfix for now and maybe try gingerbread on my Liquid e...Been doing some reading and they are almost there...Still a few bugs however should not be long before they are worked out...As you probably noticed i love phones and have had like 30 phones in the last year...lol...Streak is my favorite so far...Have not touched my laptop much since i got it..Any news on when Rogers will come out with the official version of froyo? I read someone that April is the soonest? Anyone here anything else? I hope they come out with the update shortly ...otherwise I may be forced to root it...Any news would be appreciated..Cheers
umar.ranjha said:
Hi guys,
I guess i have bricked the device while updating to 2.2.
As far as i know i have done nothing wrong i followed the Guide step by Step and Downgrade to AT&T firmware as the first guide in this post.
While i was running QLDtool it errored out and Turned off by itself. After since i have tried everything and the Device just Doesn't have power anymore. Pluging into wall socket is not giving anything either.
Any thoughts on this?? Any Help will be appreciated.
Click to expand...
Click to collapse
Pull the battery out and put it back in.
If the streak looses power, it will be stuck in a power off state and plugging in the cord will do nothing.
After you reseated the battery, you should be able to charge the device again.
After it is charged, follow from where you left off.
Despite all the excellent work by Steve & the other boffins here in this forum, I continued to experience instability (a few random resets & freezes daily) on 1.5.x
I guess stability is more important than flexibility for me atm, so I'm thinking to install the official Dell 2.2 as I hope it will put an end to my woes.
Grateful if somebody could please advise me the procedure to go about the downgrade and where to find the official 2.2 package I will need. Do I have to downgrade my BB too? If so to what version?
(I originally went from stock O2 1.6 to 2.1 then to 1.5.1)
Thanks for your input.
Current status: O2 unlocked Streak running DJ_Steves V 1.5.3, baseband GAUSB1A131800-EU
Flash stock recovery then upadte stock 318
Sent from the Iphone Killer
Just to ensure I understand correctly, borijess, you saying I should flash this first: http://forum.xda-developers.com/showthread.php?t=840326
.....which will then enable me to go straight from where I am now to 318 ?
Edit: Nevermind, after some intense googling I found a step-by-step guide of exactly what I'm after right here: http://forum.pocketables.net/showthread.php?t=8285.
Thanks again borijess for having pointed me in the right direction - I wouldn't have known what to search for.
Not Android Development
Moving to General
Hello fellow Spice owners!
I'm working on developing some custom firmware for the XT300 and eventually the XT311/316, but to get started I need some ROM dumps.
Ideally I need a dump of both the 2.2 FroYo and 2.3 Gingerbread firmwares.
If you've never dumped a ROM before it's not too hard.
First you need a rooted phone. I don't have XT31x hardware yet, but SuperOneClick should work for the 2.2 ROM and there are detailed instructions for rooting 2.3 in the Q&A forum.
http://forum.xda-developers.com/showthread.php?t=1218506
For the rest of the instructions, there is a simple to understand set of directions at M3.
http://modmymobile.com/showthread.php?t=559669
Thanks in advance,
Martin
Sent from my XT300 using Tapatalk
i could have given u a rom but i crashed mine, so i need as well a rom
its quite difficult to find Fire XT316 threads because of the lack of a own Forum section
-> a own Forum can be pushed here: Link vote +1
I doubt the XT311/316 will get a forum just yet, but I'm thinking maybe a unified XT300/311/316 forum maybe once we get some interest going with a ROM or two.
Sent from my Dell Streak using Tapatalk
smnc said:
but I'm thinking maybe a unified XT300/311/316 forum maybe once we get some interest going with a ROM or two.
Click to expand...
Click to collapse
Then u would probably need to integrate the Fire XT531 as well.
=> Motorola Fire XT300/311/316/530/531 Forum
AFAIK, the XT530/531 are not very closely related to the XT3xx line. They mostly just seem to share cosmetic similarities with a different hardware platform.
Edit:
Ignore what I just said, upon further inspection they do appear to be related, just based on the newer/faster msm7227T SOC.
Looks like I've got another device to add to my list.
Sent like a Streak of Light from Spidey, my Dell Streak 5
Just a side note, dont mess around with the vm heapsize, it made my spice go into a bootloop and i cant do anything with adb. had to send it in for repairs ):
What model spice? You could probably still have done a repair with RSD lite, asuming there is an SBF for your model.
Sent from my Spicy de-blurred XT300
here's the romdump from xt311
http://www.multiupload.com/9PHZLU70G8
btw I used this : http://android.podtwo.com/romdump/
the one in ur post didn't worked.
well i live in toronto and ive already boot looped it before and I STILL CANT FIND ANY SBF. theres none to be found and there arent any tutorials on how to extract the firmware into a sbf. sent it in for repairs already
Hey, I'm in Toronto too, lol.
You didn't answer my question as to the model.
Sent from my Spicy de-blurred XT300
Johnnyslt
Thanks!
What model and version of Android (FroYo or GB)?
I will update the OP with the link you provided, thanks.
Sent from my Spicy de-blurred XT300
xt311 gingerbread
By model what do you mean? Currently there are three (I think) different models, Canadian, Brazilian, and Chinese. I have the Canadian version but I got to borrow my friend N1 for now
Sent from my Nexus One using XDA App
Dataslycer
I meant XT311 or 316
Or are you rocking a a classic XT300 on Mobilicity like me?
Sent like a Streak of Light from Spidey, my Dell Streak 5
xt300 like a boss I tweaked mine like crazy and eventually vm killed it. Have u ever found a solution to fix home screen redrawing when sliding the keyboard in/out?
Sent from my Nexus One using XDA App
Yeah, tweak the hell outta mine too. I've actually changed the VM heap settings without tanking mine, btw, I do have a ROK dump already and backups that can be flashed with fastboot in case of emergency.
There is no publicly available SBF for us. Just the ones that the authorized Moto repair facilities have access to. Wish I could get my hands on that.
Sent like a Streak of Light from Spidey, my Dell Streak 5
I put my vm too low and started boot looping and it wouldn't respond to adb . What's a ROK dump? I wish we could get the sbf too..... Btw how much experience do you have with building roms? I concluded that I don't have enough experience plus the locked bootloader is really annoying.
Sent from my Nexus One using XDA App
Just found this
" Hi Xiao, I found a way to download the SBF file from Motorola for the Brazilian Rom, here it is: You need the Motorola Software Update (MSU) Any time after the MSU detect your IMEI number, Model Number and Operator, You need to reboot your phone and press and hold “Space” key, don’t close your MSU your phone will be in RSD/BOOTLOADER mode and the MSU will continue with the following message “The update process has been interrupted and must be restarted.” click Retry And it give you the SBF for your firmware. MSU will download the SBF file and put it in C:\Program Files\Motorola\Software Update\firmwares. it also created a file Retail – Brazil_Brazil_WCDMA_RETBRXT300WN.xml.msu who tell to motorola the file to download. As soon the file is download and the MSU prepare the installation it is important to copy the SBF to another location because it will be deleted when finished. Once you have copy the file you can stop the installation. Someone tried this with a Canadien rom but the MSU doesn't detect the Model Number and Operator."
could you give this a shot?
Sent from my Nexus One using XDA App
Good ecfort!
Unfortunately I've tried it before, but it won't work. Motorola never released any Canadian SBF to the public update server as far as I can tell. They have two SBF servers. The "public" one which the Motorola Software Updated uses and the "private" one, which requires a secure authenticated session and is only available to authorized Motorola Service Centers.
Also, that was supposed to read "ROM dump"
I did a dump of my system, boot and recovery partitions. I've got them all in .img files which are flashable by fastboot.
Handy for recovering from a messed up build.
I've only ever built a few ROMs, but I think I can pull it off.
The plan is to start simple with trying to get FroYo from an XT316 to run on a XT300. The hardware is near identical, except for the upgraded CPU, so it should be simple.
Then on to an AOSP FroYo build. Eventually I'm going to try to get GB running too, but that might be too much for the limited hardware.
Of course, I'm stuck with the stock 2.6.29 kernel due to the bootloader lock, so no overclocking or kernel tweaks.
I'm also going to try and get an AOSP build done for the XT311/316 once I get my hands on the firmware.
Sent like a Streak of Light from Spidey, my Dell Streak 5
Darn..... well that's alright. When we get froyo its going to be so much better. I find that even after i removed the spicy.apk there were still lots of motorola stuff running in the background :/. When do you think you will have an experimental rom?
So I'm sorry if I shouldn't be creating a new thread for this. It's a pretty unique situation and I couldn't find it anywhere.
I had upgraded my P500 to official 2.3.3. I then decided "hey, I should try out some custom roms because this sucks...". I rooted with SuperOneClick, managed to install Clockworkmod recovery and the set out to find a nice new rom. I soon discovered that there weren't really any exciting ones that piqued my interest because of the new baseband. The baseband thing is also confusing the heck out of me. Anyways, I managed to KDZ Updater back to my stock firmware because I figured I might as well do something good out of this. So now I'm on 2.2.1, specifically LG v10v. This is a Koodo phone if that helps at all. Also, I'm pretty sure CWM is now wiped and super user access is gone too. Spent a good amount of time putting everything back on the silly thing yesterday lol.
First question: Am I now on new baseband or old baseband (having flashed with
KDZ)?
2nd: I keep seeing references to baseband 10 or 20 followed by a letter. Am I on baseband 10v? If I want to use a custom rom, do I need to change it to 10 a,b or c or something like that.
3rd: Seems like mixed reviews on this one all over the place. Can Rom Manager be successfully used on the P500 to install CWM or does it brick it?
Any other info you can think of would be terribly helpful. Please go easy on me! I'm not sure if I made a mistake by creating this post or not...
You can use RomManager to flash cwm, in the past you could softbrick your phone, but this issue is already solved.
With froyo you are on old baseband, so you can use almost any custom rom for old baseband. No need to flash any baseband for these roms.
Sent from my LG-P500 using XDA App
Hello Crispus222 !
If you are on stock 2.2.1 V10v flashed by KDZ, you have the old baseband.
So if you wanna try custom ROMs you should search those who support the old BB.
But don't forget that you can change baseband without flash stock ROM via KDZ.
ROM Manager flash cwm recovery without problems on rooted phone, I have done this many times
1) Old baseband. If you've used a full stock 2.2.1 or lower rom, than you're on the old baeband now.
2) I'm on the old baseband and mine is 10v. So I'm assuming you're now on the old baseband! Congratulations!
3) Yes. ROM Manager CAN be used on the LG Optimus one whether you have the old or new basebands. Just install ROM manager, choose flash ClockworkMOD and then scroll down to "LGE Optimus One" and hit flash. After that, boot into recovery and you're done!
enjoy all goodies .
u r on old baseband after kdz flash.
now root using z4root . (file sharing sites remember!)
install rom manager from market and install cwm recovery n yeah it works without a glitch but its ur luck too.
reboot into recovery n there u go !
Crispus222 said:
So I'm sorry if I shouldn't be creating a new thread for this. It's a pretty unique situation and I couldn't find it anywhere.
I had upgraded my P500 to official 2.3.3. I then decided "hey, I should try out some custom roms because this sucks...". I rooted with SuperOneClick, managed to install Clockworkmod recovery and the set out to find a nice new rom. I soon discovered that there weren't really any exciting ones that piqued my interest because of the new baseband. The baseband thing is also confusing the heck out of me. Anyways, I managed to KDZ Updater back to my stock firmware because I figured I might as well do something good out of this. So now I'm on 2.2.1, specifically LG v10v. This is a Koodo phone if that helps at all. Also, I'm pretty sure CWM is now wiped and super user access is gone too. Spent a good amount of time putting everything back on the silly thing yesterday lol.
First question: Am I now on new baseband or old baseband (having flashed with
KDZ)?
2nd: I keep seeing references to baseband 10 or 20 followed by a letter. Am I on baseband 10v? If I want to use a custom rom, do I need to change it to 10 a,b or c or something like that.
3rd: Seems like mixed reviews on this one all over the place. Can Rom Manager be successfully used on the P500 to install CWM or does it brick it?
Any other info you can think of would be terribly helpful. Please go easy on me! I'm not sure if I made a mistake by creating this post or not...
Click to expand...
Click to collapse
You are and have always been on OLD baseband as you have to flash the new one in a seprate step.roms don't come with any baseband included.10v\or\10s don't matter as that is OLD baseband.20g\or\20a is new baseband.Rom manager can Install CWM recovery on any p-500 sccuessfully.I would ROOT 1st before installing.The brick comes from flashing a corrupt (over the air) downloaded rom & flashing that.TWRP 1.1.1.1.XL is my choice for recovery but CWM is fine.The LGDMP tool is also my choice for flashing baseband & rescue my phone when things go wrong.ROMs run on either old baseband or new but the newer ones run both (but download the link you are going to run)choice.Hope this helps !
Thanks so much everyone! I appreciate the help a lot.
hello....if anybody watching this, then please help me upgrading my streak to GB 2.3.3
Actually I am having STOCK FROYO 2.2.2 (rom 355) installed.
how should I upgrade it?
as I have read it on many forums that I have to flash recovery 350, do I really need to because I am already on 355?
and please provide a solution so I don't get any blinking lights bug after upgrading :silly:
HELP PLEASE
Search for threads titled "Everything you always wanted to know about the Streak but were too busy bricking it" and start reading the information at the links that turn up.
If you want to upgrade to Gingerbread, install one of the custom ROMs such as mine rather than go with the 407 ROM. The two DSC ROMs available have had many improvements made that won't be found in the 407 ROM. You will also need to root the Streak and install a custom recovery to do so.
Strephon Alkhalikoi said:
Search for threads titled "Everything you always wanted to know about the Streak but were too busy bricking it" and start reading the information at the links that turn up.
If you want to upgrade to Gingerbread, install one of the custom ROMs such as mine rather than go with the 407 ROM. The two DSC ROMs available have had many improvements made that won't be found in the 407 ROM. You will also need to root the Streak and install a custom recovery to do so.
Click to expand...
Click to collapse
i have read it.......n what I want is to just install a clean stock rom. I really don't want to root my phone or to install a custom rom..........that why I posted this.....if any 1 like you could help to install 407 pkg with no blinking issue and a clear guidence.
Help if you can....
Using baseband 355 retail rom.....
I do understand not wanting a rooted device, as not everyone needs the level of control and customization that is possible with a rooted device. However, there are simply too many issues with the stock ROM to in good conscience recommend using it. As noted, the two DSC ROMs available here fix a lot of issues that are still present in the stock ROM. One notable thing about the DSC ROMs is the Phoenix kernel they include does not perform the baseband check, thus you will never encounter blinking LEDs.
If however you insist upon installing the stock ROM anyway, you'll need to download the 407 baseband files, 407 recovery, and 407 ROM package. You'll have to use ADB to push the baseband files and recovery to the Streak. From there, you copy the ROM to the MicroSD card, boot into the recovery, and install the ROM package. Detailed instructions are readily available in the various flashing guides in the forums. The one thing you'll need to look for is the dev-host links, as that is where you will find the ROMs.
Yes yes.....i have the rom as well the recovery but not the baseband.
Thanks alot
I will check if I can find the baseband files.
By the way Do I need to root to push the baseband through ADB?