Hi all i have a Htc Mozart and when i go to do the new mango update i keep getting the same error i have to tried to use the help solution on zune but no joy.The error code is Error 801812C1 if anybody knows how to sort this i would appreciate it
Thanx Andy
Error
Hi matey, just stumbled upon a thread you might be interested in, Please press thanks if this helps:
http://forum.xda-developers.com/showthread.php?t=964896
Hi thanx for the reply I have tried that and still no joy
i might be able to help u as i ve the same problem when i tried to update yesterday if yr ph is on 7.0.7004.0 then be prepared to spend a few hrs unless u ve super speed connection as u ve to go tru 4 updates b4 u get mango n after that u get htc update.U only got 801812c1 i got 80004005 and c101007but i manage to sort it out thanks to a post i search on google the reason why we get the error is bcos the required driver cannot b installed as win can't recognise the device bcos of zune when the ph reboots after the connection to pc picture ok this is what u can try as it works for me perfectly : when u reach stage 6 of 9 the ph will be rebooting and going into pc connection mode and win starts driver installation but the problem is b4 it finishes the ph reboots so this is what u ve to do when u get error and installation stops,quickly press the camera button at the white screen don't let the ph boot exit the installation page( meantime holding camera button do not let go) but don't disconnect usb or exit zune u will be in the syn page and win will start installing driver again when it finds the elusive file Pxxxx ( all this while yr ph should be in the pc connection mode) the driver will be successfully installed. Go back to find updates again this time n this time when the update starts n reach stage 6 u won't see the popup driver installation.
i did all 5 updates in one sitting without disconnecting the ph and i don't ve the driver issue anymore nor any other errors i tried all the fixits and they don't help only the camera button solve it for me
one other thing if updates is checking yr disk space it can go on forever 1st time i did'nt know i left it for 50 mins u can just let it run for a while if nothing happens cancel go back to check update again and when u come back it will skip that step sometimes u ve to do it more than once . hope i helped enjoy yr updating ...
B4 update: os 7.0.7004.0
fw 2250.09.12803.728
radio 5.52.09.16.22.339.50.10u
bootloader 1.28.2205.3(113810)
Latest: os 7.10.7720.68
fw 2250.21.50001.728
radio 5.69.09.05a.22.50.50.21u
bootloader 5.0.2250.1(130781)
hi i tried wot you said still no joy here is the specs of my phone
OS version 7.0.7403.0
Firmware 2250.21.14201.206
Hardware 0004
Radio Software 5.66.09.09_22.46.50.21U
radio hardware A.102.0.D4
Bootloader 1.42.2250.1(123643)
Chip SOC 2.2.5.0
try this ...when u get the error exit the updating page disconnect the usb whilst ph is still in pc connection mode and reconnect usb n remember to let it boot up once u see driver successfully installed otherwise zune won't see yr ph hope this works
Related
My xda 2 is stuck on the bootloader and wont do anything after trying to reset it ive tried i think everything that i can possible do and i read most of what was offered yet its still stuck on the bootloader. I tried to upgrade from v1.60.... to the latest at v1.72.187 uk o2 . Please help ><
Have you tried resetting your device, placing it back in the cradle and re-running the upgrade?
I have tried reseting but it fades then reappears disallowing me to run the upgrade 'Xda_II_172187_Final' but i have downloaded another which sizes around 512kb but this says that the rom image is not present. :/ can u link me to another upgrade if it may help
Shadow786 said:
I have tried reseting but it fades then reappears disallowing me to run the upgrade 'Xda_II_172187_Final' but i have downloaded another which sizes around 512kb but this says that the rom image is not present. :/ can u link me to another upgrade if it may help
Click to expand...
Click to collapse
Exactly which upgrades have you attempted? What happens when you run the XDA_II_172187_Final upgrade?
What is the 512kb upgrade you mention?
I used 'himaupgradeut_197.exe' after the 'Xda_II_172187_Final'.
'himaupgradeut_197.exe' was the 500kb file which gave me the error
that no rom image was found and the 'Xda_II_172187_Final' was the only 1 that i used to upgrade and that says it cannot connect to the device ...make sure its connected.
Shadow786 said:
I used 'himaupgradeut_197.exe' after the 'Xda_II_172187_Final'.
'himaupgradeut_197.exe' was the 500kb file which gave me the error
that no rom image was found and the 'Xda_II_172187_Final' was the only 1 that i used to upgrade and that says it cannot connect to the device ...make sure its connected.
Click to expand...
Click to collapse
The HimaUpgradeUt_197.exe file is not an upgrade it is a version of the upgrade program. It still needs to be used with all the other files that form part of the upgrade process.
As regards the connection error, make sure you are in bootloader mode (by pressing Jog button and Power button at the same time as pressing reset) before retrying the upgrade. Also make sure the USB cradle is plugged directly into a USB port on your PC and not through a hub and that the power supply is connected to the cradle. It may help to make sure that ActiveSync isn't running also, as it is not required for upgrading.
Isnt it already in bootload mode? if not i dont know where the jog button is Also i just realised i didnt have my cradle its own powersuplly which i have done just now but i dont want to carry on witht upgrade is there a way i can just make it back to normal ?
Shadow786 said:
Isnt it already in bootload mode? if not i dont know where the jog button is Also i just realised i didnt have my cradle its own powersuplly which i have done just now but i dont want to carry on witht upgrade is there a way i can just make it back to normal ?
Click to expand...
Click to collapse
It sounds like your device is already in bootloader mode - my suggestion is just a 'failsafe' The Jog button is the multi-directional button at the bottom centre of your device.
I don't think it is possible to 'go back' to normal as if you never did anything. With the power connected properly there is every chance an upgrade will now work. You can, of course upgrade using the original ROM version, if you know what that was.
hmm its still done a restart and yet it doesent seem to connect. When i restart the xda 2 its still in bootload mode when i place it in cradle still in bootload mode and i still get the same errors witht the upgrade ><
OK. This should work Can you try a different USB port? Failing that, is it possible to try another PC? I know about other users that had connection problems and tried a different PC and it worked OK.
Omg thank you i thought i lost it Thank you Very much i cnt thank you enough. ^^
For reference i switched the USB cable around and it worked ^^
That is great news
Hi all.
I have a qtek 1010 and i downloaded the rom from here: http://forum.xda-developers.com/viewtopic.php?t=16916
when i go to install it, the computer shows the infos of the device than when i click update the phone suddenly resets by itself so the connection with the computer becomes lost. and the instructions say that i must not disconect the device from the pc at all. when i go to reconnect it, the computer shows after a while a message: " the current software is gonna be erased from your pocket pc now" or something like this, and there is a load bar that keep not loading (0%). finally a message comes up and says that there has been a problem in updating the rom version and bla bla due to following reasons such as disconnecting the device from your computer...
Now what can i do to solve this please help as soon as you can..
Regards.
http://forum.xda-developers.com/viewtopic.php?t=20517
hi all
sorry to bother u all but a weird thing is happening with me
I was trying 2 flash my rom but it says"INVALID UPDATE TOOL" error 200...........through the SPL method..........
I have flashed my device a no. of times but this time it is not happening i have even reinstalled it..............
but of no use ............PLEASE HELP........
I think you have to download another utility to flash your gene. Maybe it's corrupted.
or may be its time to visit service center
nexticon2000 said:
hi all
sorry to bother u all but a weird thing is happening with me
I was trying 2 flash my rom but it says"INVALID UPDATE TOOL" error 200...........through the SPL method..........
I have flashed my device a no. of times but this time it is not happening i have even reinstalled it..............
but of no use ............PLEASE HELP........
Click to expand...
Click to collapse
Restart you comp.At the very same time, start your device.get it synced properly first.do not keep it in USB TO PC mode.make sure your device is in active sync mode.Then try.i have faced these errors many times.
just try what i say,u'll do good.
YEAH
THanx man
It WORKS!!!!!!!!!!!!!
It's gud 2 flash my gene again......................
just downloaded urs old gene 7.1
karan999 said:
Restart you comp.At the very same time, start your device.get it synced properly first.do not keep it in USB TO PC mode.make sure your device is in active sync mode.Then try.i have faced these errors many times.
just try what i say,u'll do good.
Click to expand...
Click to collapse
good.Thanks! i do it. and it runs correct again.
Hello guys i hope that you can help me i have a huge problem my neo: it doesn't response when i press power botton, green light is flashing and lcd is black!
I had CM 7.1 before and few things didn't worked well (i loved it but i had problem with camera) so i wanted to replace it with stock ROM newest version...
I tryed few methods with fastboot, and x10 flashtool, SEUS and Wotan client...
Fastboot flashed ROM successfully (older versions) but it stucked at SE logo ...
So i tryed out x10 flashtool followed by guides etc. and when i connect my phone to pc X10 Flashtool is showing up some errors about USB drivers = USB\VID_0FCE&PID_ADDE\4&2BEA0481&0&002etc
... and i installed drivers (Gordons Gate)
So i tryed 3th solution Downloaded SEUS and again stuck at connecting mode it doesn't show my phone connected... Cant make it work
And 4th solution was Wotan client. And i found some old ROM 3.1....145 and i flashed it and VOILA IT WORKED...
BUT i'm greedy bastard and i wanted the newest version of my ROM ))) (yes shame on me) so i tryed to update it with SE PC companion... and it connected with pc and than downloaded some small file and when it pops to connect my phone again it was unable to detect it (i followed procedure carefuly).
So i tryed to update it from Phone and it downloaded all things, phone restarted and now i got problem i mentioned above "my NEO doesn't response when i press power botton, green light is flashing and lcd is black!"
So i tryed to Flash old 3.1...145 ROM with Wotan client and again same problem (green light) and after it i tryed to flash the newest version of ROM 4.0.2.A.0.42 and same problem...
Also my phone is on charger at the moment i dont know how much batery % i got and again green light is flashing when its charging!
Also im using Windows XP Pro SP3 if it matters!
And now i cant connect phone in fastboot mode - when i connect usb cable to phone while holding meny key blue led doesnt show...
So guys if you can help me somehow i would be very grateful.
And sorry for to long Thread i am just out of any ideas
I think i can fix it, i'll send you a pm with instructions
Great i hope You will be able to fix it
Is there any progress about your problem, my friend suffering exactly same situation and we couldnt find anything to solve... Pls share your experiences...
Alejandrissimo said:
I think i can fix it, i'll send you a pm with instructions
Click to expand...
Click to collapse
can u pm me too?
ergokce said:
Is there any progress about your problem, my friend suffering exactly same situation and we couldnt find anything to solve... Pls share your experiences...
Click to expand...
Click to collapse
YES my Phone is fixed and im happy... Now i will sell it and buy HTC )))
Oke so where was problem? Problem was in SEMC (its something like bootloader i guess) it was erased. Phone was at service (good thing is that im working in mobile phone store and service so it was free for me xD) and now its fully working with 3.0...145 software version!
And my servicer told me not to update to current 4.0....42 version because i have unlocked bootloader (had to unlock it to install CM 7.1) and something might go wrong! ... So tell your friend to take phone to service and to pay thats only way for now...
I have the same problem, could I please have some help as well?
if any one have this problem here is the solution
http://forum.xda-developers.com/showthread.php?t=1353623
Ive opened this thread coz many people are finding my tutorial usefull
so here goes and if it helps let me know and give me a thanks
Hi i was new to all this and installed dynamics v2.0 fully unlocked rom the other day and this is how i went about it
download this
RUU_Mozart_Orange_UK_1.24.061.35_Radio_5.50.09.18_22.24.50.09U
http://www8.zippyshare.com/v/48117282/file.html
this is a load your phone back to 1.24
to install it i did this
turn phone off hold down volume down and turn phone on you should go to the bootloader screen then plug in your usb cable to the pc,
then on the white line at the bottom on phone screen should say usb instead of serial but maybe it will need to install some drivers cant remember 100%
when it is ready open that file and click the RomUpdateUtility.exe and follow the steps in that then you will have your phone back to 1.24
next you can follow this post here and download the attachment at the bottom named DFT_XSPL_WP7FG1.rar this what u need for this step
http://forum.xda-developers.com/showthread.php?t=1195647
basically this is the install procedure u may need to install active sync (XP) or windows mobile device center (vista and 7) but i did not have to my phone automatically did this
DFT_RSPL_WP7FG1_LAUNCH allows you to load RSPL on the device:
1. Extract ALL files from RAR archive.
2. Run DFT_RSPL_WP7FG1_LAUNCH (with administrative rights to access USB)
3. Mindfully reads information text. Press “Next” button.
4. Reset your device and hold “Volume Down” button during reset to enter OSPL mode.
5. Connect your device to PC via USB cable.
6. Now you may need to install proper USB drivers. They come with Active Sync / Windows Mobile Device Center.
7. Install drivers if required.
8. Make sure device show “USB” at the bottom instead of “Serial”.
9. Press “Next” button in the wizard. It should detect your phone.
10. If you are using WCEUSBHS driver under Windows Vista/7 (for MTTY or MAGLDR TTY for example), you should apply “Windows XP compatible mode” in the properties of EXE file to get connection.
11. After successful connection it should show device codename and allows to choose installed OSPL version.
12. You should look at the screen and select OSPL version in drop down list box. You need do this because it’s not possible to detect installed version via USB.
If your current SPL version doesn't present in the list, you can choose nearest version,
BUT ONLY IF IT HAS SAME FIRST NUMBER!!
Example: You have 4.XX on the device. Do NOT choose 1.XX 2.XX 3.XX.
13. Press “Next”. Wait until comes final page.
14. Read and close window
15. Look at the device – it must reboot to RSPL.
16. If you see RSPLX.Y.Z and “CotullaRSPL” on the screen – the task done! Otherwise, please report in this thread about your problems.
17. Put some feedback in this thread for community and developers.
Installing HSPL
DFT_HSPL_WP7FG1_INSTALL allows you to install HSPL on the device:
1. Launch RSPL on the device like described above.
2. Be sure that you close RSPL wizard window.
3. Run DFT_HSPL_WP7FG1_INSTALL.exe (with administrative rights to access USB)
4. Mindfully reads information text. Press “Next” button.
5. Proper drivers already must be installed in RSPL step.
6. Press “Next” button in the wizard. It should detect your phone.
7. If you are using WCEUSBHS driver under Windows Vista/7 (for MTTY or MAGLDR TTY for example), you should apply “Windows XP compatible mode” in the properties of EXE file to get connection.
8. After successful connection it should show device codename and allows to choose HSPL or OSPL version to install. OSPL means you install stock SPL back.
9. Check device codename, if something wrong turn off computer and run to the nearest forest. Grab some water with yourself.
10. Press “Next”. Wait until comes final page.
11. Device will reboot and start to boot OS.
12. Reset it and enter SPL mode again. Be sure there HSPLX.Y.Z and “CotullaHSPL” appear.
13. Put some feedback in this thread for community and developers.
Now u are ready
you can find what custom rom you want i used dynamics v2.0 which can be found here and its fully unlocked aswell so all i all im pleased with it
http://forum.xda-developers.com/showthread.php?t=1520352
download it and install the same way we installed the 1.24 rom in the begining of this post
turn phone off hold down volume down and turn phone on you should go to the bootloader screen then plug in your usb cable to the pc,
then on the white line at the bottom on phone screen should say usb instead of serial
when it is ready open that file and click the RomUpdateUtility.exe and follow the steps in that and then you will have loaded your desired custom rom onto your phone
I hope this helps some of u out and happy modding
best regards
steve
1.24
Great guide thanks, my phone is network unlocked do you know if that will revert once upgraded? also you mention rolling back to 1.24 what does 1.24 mean,and how do i find out if my device is on 1.24 already? one last Question how are you finding the rom any issues with it?
cheers
Geoff
geofferz said:
Great guide thanks, my phone is network unlocked do you know if that will revert once upgraded? also you mention rolling back to 1.24 what does 1.24 mean,and how do i find out if my device is on 1.24 already? one last Question how are you finding the rom any issues with it?
cheers
Geoff
Click to expand...
Click to collapse
1.24 im refering to the SPL you can find your version by turning the phone off holding volume down and power button and u will see your SPL at the top,
im not sure about the unlocked sim/network im new to all this aswell maybe do a search on the forums and see if you can find the answer, but i dont know this 1 sorry :/
rom is good no issues had a cable issue yesterday that wouldnt let me charge my phone but thats down to my dodgy cable
you dont have to install this rom you can use any custom rom you like or might find out there
anyways hope this helps
Launch RSPL
Thanks a great help.. ok to use to add tunes via zune? last bit on installing the custom Rom, what ruu option do I choose?
Cheers
hehe the first stage 1.2 spl.. when I open the rom update it gives a error 208? the update utility cannot open the requested file? any ideas and do i have to down to 1.2?
edit..Windows Mobile Device has been installed but when I open it, its not connected!! I powered of the phone with volume down. I can see the spl and usb at the bottom and it installed usb drivers etc, Im I missing a driver?
thanks once again
geofferz said:
hehe the first stage 1.2 spl.. when I open the rom update it gives a error 208? the update utility cannot open the requested file? any ideas and do i have to down to 1.2?
edit..Windows Mobile Device has been installed but when I open it, its not connected!! I powered of the phone with volume down. I can see the spl and usb at the bottom and it installed usb drivers etc, Im I missing a driver?
thanks once again
Click to expand...
Click to collapse
hi u don't need to worry about mobile device center this never picked up my phone either until I installed the custom rom
Don't ask why I've no idea
So what's happening when you press volume down and power you are seeing the multicolored bootloader screen right?
If so I don't know why the rom won't install for you
Maybe I've heard your firmware is at .707 if so you need y cables and its harder to downgrade your sol
tell me the firmware version please and ill try help u its in settings then about then advance on your phone if I remember
Oh also do not extract the 1.24 from the .rar file run everything from there
This is why ur getting that error I think
geofferz said:
Thanks a great help.. ok to use to add tunes via zune? last bit on installing the custom Rom, what ruu option do I choose?
Cheers
Click to expand...
Click to collapse
you dont need to select a option just load ROMUpdateUtility.exe
ive just downlaoded and reinstalled the rom myself to try see what u mean and i dont get this option
when you go to bootloader screen on your phone and it says usb open the rom file and click ROMUpdateUtility.exe
now dont open active sync or mobile tools as it says on the program information
just click the tick boxes and continue through the process
maybe try download the rom again found this
ERROR [208] : FILE OPEN
ERROR [210] : FILE READ
These error messages indicate that RUU lacks certain important files and cannot continue with the update. Please get the complete RUU package again.
but like i sed i have downloaded the file myself and it is working for me without any problems
beany2009 said:
hi u don't need to worry about mobile device center this never picked up my phone either until I installed the custom rom
Don't ask why I've no idea
So what's happening when you press volume down and power you are seeing the multicolored bootloader screen right?
If so I don't know why the rom won't install for you
Maybe I've heard your firmware is at .707 if so you need y cables and its harder to downgrade your sol
tell me the firmware version please and ill try help u its in settings then about then advance on your phone if I remember
Click to expand...
Click to collapse
Thanks for the help.
My firmware is 2250.21.40600.61,hope I don't need y cables for this version..
I see the multi coloured screen, and once plugged in to my pc it says usb at the bottom..
Strangely the 1.24 rom update works sometimes and not others, can you remember when you do done it, did it tell you want version currently on? because it didn't for me, I pressed next until update screen and was on 0% for bout 6-7 mins, my phone also displayed the same, how long did it take roughly
As regards to the Dynamics rom update.exe ( I opened with no phone attached ) It says welcome to the advanced rom update utility for Htc Mozart below that are, two ruu options.. regular (this is default) and below is custom I was thinking or using logic that I don't think i have hehe.. that the custom would be the option? or leave it
I really appreciate your help on this, I have installed many custom rom on android,but this windows phone grr annoying but I wont give up.
geofferz said:
Thanks for the help.
My firmware is 2250.21.40600.61,hope I don't need y cables for this version..
I see the multi coloured screen, and once plugged in to my pc it says usb at the bottom..
Strangely the 1.24 rom update works sometimes and not others, can you remember when you do done it, did it tell you want version currently on? because it didn't for me, I pressed next until update screen and was on 0% for bout 6-7 mins, my phone also displayed the same, how long did it take roughly
As regards to the Dynamics rom update.exe ( I opened with no phone attached ) It says welcome to the advanced rom update utility for Htc Mozart below that are, two ruu options.. regular (this is default) and below is custom I was thinking or using logic that I don't think i have hehe.. that the custom would be the option? or leave it
I really appreciate your help on this, I have installed many custom rom on android,but this windows phone grr annoying but I wont give up.
Click to expand...
Click to collapse
lol np mate ill try help as best i can
right i understand your bit now about the dynamics rom u need to select regular on this part
custom i think would be if u want to edit it or some **** but i have no idea so u use regular mate because this is the actual rom file made but remember u must downgrade and load rspl and hspl onto your phone before doing this step
right my firmware is 2250.21.51301.401 but i dont know if this changes on installation of the downgrade and adding the custom rom like i sed im a complete noob with this myself but all went smoothly for me thats why i made the tutorial
and no mate my phone took about 5-10 mins to install the 1.24 orange rom
have u tried a hard reset first and then see if it helps with the installation
ill search around for your firmware and see if there has been issues
edit..........................................
did a search on the forums and your firmware comes up with nothing :/ did a google and only shows this thread did you type the numbers correctly?
also you mean that the rom update works sometimes and not others?
if it works once it should install it mate np's
When you load you phone into bootloader the multicoloured screen can you please type here what u see mainly the top letters and numbers
beany2009 said:
When you load you phone into bootloader the multicoloured screen can you please type here what u see mainly the top letters and numbers
Click to expand...
Click to collapse
again thanks for your help
ok here goes red: PD 67100 ss-BC (4k)
SPL-4.6.2250.0(129193) mng
what you think?
i think my SPL was on that before so i dont know why u are having issues mate :/
maybe wait and see if a developer can read this and give us some info on why its not working for you :/
Thanx For The Help And the Tutorial It Was very Helpfull
Now my phone Is running dynamic 2.0
hey can u tell me what other custom roms are available that i can install on my phone and if there are any different methods of installing them
no problem mate glad it helped
erm the only other custom rom i have seen on mozart is deepdishing v7.0 you can find this in the development thread inside mozart topics
and for me mate im not sure and have not seen another way of installing another custom rom but im new to all this myself
anyway glad this helpped
regards
my computer wont pick up htc 7 mozart in bootloader
can anyone help me its doing my head in .
when you connect your phone to pc in bootloader its not showing as usb on the bottom of bootloader screen?
just serial?
just to confirm. this wont work on Asian handsets.
beany2009 said:
Ive opened this thread coz many people are finding my tutorial usefull
so here goes and if it helps let me know and give me a thanks
steve
Click to expand...
Click to collapse
Thx for the easy to follow guide.
It worked on a telstra brand mozart using windows 8.
Sent from my GT-N7105 using Tapatalk 2