Hi all.
I have a qtek 1010 and i downloaded the rom from here: http://forum.xda-developers.com/viewtopic.php?t=16916
when i go to install it, the computer shows the infos of the device than when i click update the phone suddenly resets by itself so the connection with the computer becomes lost. and the instructions say that i must not disconect the device from the pc at all. when i go to reconnect it, the computer shows after a while a message: " the current software is gonna be erased from your pocket pc now" or something like this, and there is a load bar that keep not loading (0%). finally a message comes up and says that there has been a problem in updating the rom version and bla bla due to following reasons such as disconnecting the device from your computer...
Now what can i do to solve this please help as soon as you can..
Regards.
http://forum.xda-developers.com/viewtopic.php?t=20517
Related
When i run .lnk, i have a problem: it has a error
The file "JumpSpl"cannot be opened. Either it í not signed with a trusted certificate, or one of its components cannot be found. U might need to reinstall or restore this file.
How i to fix this error !!!
I have Dopod 818 Pro with G4
lehoang49cc said:
When i run .lnk, i have a problem: it has a error
The file "JumpSpl"cannot be opened. Either it í not signed with a trusted certificate, or one of its components cannot be found. U might need to reinstall or restore this file.
How i to fix this error !!!
I have Dopod 818 Pro with G4
Click to expand...
Click to collapse
Hey hey~~~~~
put to " \ " directory, not \windows or else, better read here.....
http://forum.xda-developers.com/showthread.php?t=353547
1. copy the 3 files from the jumpspl.zip (attcached at teh bottom of this post )to the ROOT
directory of your Prophet ( JUST NEXT TO THE " \WINDOWS" FOLDER, outside but NOT NOT
NOT inside the windows folder,
2. UNPLUG/disconnect YOUR DEVICE from PC,
3. Execute the SPL.lnk IN THE DEVICE, then you see Prophet in all bright or white screen,
--------------------------------------------------------------
I do that correctly but it still have error !
if possible~~~~
TRY to remove shortcuts from startup folder and make a softreset or hardreset and try again...
cannot connect after running SPL.lnk
after running SPL.lnk i get the white screen, when i connect the usb back to phone nothing happens, when i run ROMUpdateUtility it says no connection with the device.
tried with on 3 pc's for now.
am i doing somthing wrong or did i miss somthing?
the phone has wm5 rom right now.
it seems like i have no usb connection to the device after running SPL.lnk
Please help.
no need help any more, just used the g4 spl.ink file.
Reflexxive said:
after running SPL.lnk i get the white screen, when i connect the usb back to phone nothing happens, when i run ROMUpdateUtility it says no connection with the device.
tried with on 3 pc's for now.
am i doing somthing wrong or did i miss somthing?
the phone has wm5 rom right now.
it seems like i have no usb connection to the device after running SPL.lnk
Please help
Click to expand...
Click to collapse
1. after the spl.lnk, you will see nothing on the prophet,
2. if connection error, soft reset and try again,
3. are you really following my steps?
4. please make more carefully,
5. did you make the hardSPL yet?
please read again my steps in the link on my signature below...
Chao~~
P.S. Vista version Windows environment.... not tested.
Same here....
I followed all the steps mentioned and I did this many times,
I have G4 and windows 6.0
1) Copied all 3 files above windows folder
2) Disconnected USB cable
3) Ran spl.lnk file, got white screen
4) Connecting to USB FAILS!!!!!
I tried doing soft reset and removed the battery for a while, restarted my computer.. NOTHING helped out.
Bottom line is whenever I connect my USB with white screen its not connecting to ActiveSyn and also the downgrade exe also giving error message like no connection with PC.
Help me out with this.
Now it works, I didnt do hardSPL which is nothing patch must be done before making the 1st step mentioned in this thread. I saw that in another thread and now it works fine. Thanks, its really fast!!!
I know, I know: First use the board-search and google...
I did that and I couldn't find anything useful for my issue.
I'm trying to update my HTC Prophet G4 to WM6.1...
I wanted to use SoftSPL and after executing the SPL.lnk the screen turns white as it should, but after that Windows XP doesn't recognize my phone anymore as connected.
I tried different USB-Ports, but the "ROMUpdateUtility_NV_G4.exe" keeps telling me "Error 260" which means it couldn't connect to my phone.
I'm really desperate cause I've already tried to upgrade for some days...
So if anyone knows how to fix that plz write =D English and German are okay with me
mickgrand said:
I know, I know: First use the board-search and google...
I did that and I couldn't find anything useful for my issue.
I'm trying to update my HTC Prophet G4 to WM6.1...
I wanted to use SoftSPL and after executing the SPL.lnk the screen turns white as it should, but after that Windows XP doesn't recognize my phone anymore as connected.
I tried different USB-Ports, but the "ROMUpdateUtility_NV_G4.exe" keeps telling me "Error 260" which means it couldn't connect to my phone.
I'm really desperate cause I've already tried to upgrade for some days...
So if anyone knows how to fix that plz write =D English and German are okay with me
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=353547
Thanks for posting, but as I already told you: I did my research...
So I already tried different FlashingTools, like ProphetTools etc.
When I SoftSPL, I get to the whitescreen but i cannot make my pc recognize the phone at my usb-port.
When I enter the 3-Colored-Screen manually it shows the usb-connectivity, but I cannot update the ROM...
There was a way (I cannot remember anymore which way I did it, cause I really tried very often) I entered the 3-Colored-Screen and there was "RUU" written in the right upper corner of the screen. But then again the connectivity doesn't work...
Also tried different usb-ports and cables...
I could say that I'm feeling like a weirdo, cause upgrading a rom seems easy and still makes my day miserable xD
//EDIT:
Didn't see the "Lazy_Tool" at the first glance, but now after trying I still get the same error...
//EDIT2:
Realized that the error-code could be useful^^ --> "Error[260]: Update Error" (Sth like that^^)
I had a similar issue. When your PC reports it cannot connect to the phone - does the phone restarts?
mickgrand said:
Thanks for posting, but as I already told you: I did my research...
So I already tried different FlashingTools, like ProphetTools etc.
When I SoftSPL, I get to the whitescreen but i cannot make my pc recognize the phone at my usb-port.
When I enter the 3-Colored-Screen manually it shows the usb-connectivity, but I cannot update the ROM...
There was a way (I cannot remember anymore which way I did it, cause I really tried very often) I entered the 3-Colored-Screen and there was "RUU" written in the right upper corner of the screen. But then again the connectivity doesn't work...
Also tried different usb-ports and cables...
I could say that I'm feeling like a weirdo, cause upgrading a rom seems easy and still makes my day miserable xD
//EDIT:
Didn't see the "Lazy_Tool" at the first glance, but now after trying I still get the same error...
//EDIT2:
Realized that the error-code could be useful^^ --> "Error[260]: Update Error" (Sth like that^^)
Click to expand...
Click to collapse
260 IS A KIND OF CONNECTION ERROR,
PLEASE SOFTRESET AND TRY AGAIN!!!
1. FLASH NVID FIRST,
2. LAZY TOOL TO HAVE THE JOB DONE.
dwizard said:
I had a similar issue. When your PC reports it cannot connect to the phone - does the phone restarts?
Click to expand...
Click to collapse
If u want to know if I bricked the phone then no =) I can restart it and everythings fine^^
If u meant sth else plz specify your question a bit
@ dioxda2:
Ok I'll experiment a bit^^ I'll get my new hardware soon, so maybe the error won't be a problem^^ We'll see =)
mickgrand said:
If u want to know if I bricked the phone then no =) I can restart it and everythings fine^^
If u meant sth else plz specify your question a bit
Click to expand...
Click to collapse
OK, rephrasing: the problem I had with my phone was that while a ROM update was running the phone would restart and I got the same error you did.
It turned out the battery was at fault, after replacing it with a new one - it works great.
If u do as dioxda2 says all should be fine. He is right in saying 260 is a connection error. That means unplugging all usb devices out of ur machine. It also means disabling all other connection software, like my raspberry program that display device screen when active sync'd. I always disable my anti virus and firewall (make sure ur not connected to internet at time).
i always ensure that the flashing tool is on the root drive, not in many folders (so place flash tool direct on ur main hard drive in its folder as uve unzipped) this itself can cuase connection errors. Ensure battery is 50% min too.
Good luck
I am in some desperate need of help here before I ship my phone off to the SE Repair center. I tried updating my software version to the latest Gingerbread version through the PC Companion. During the update, the PC companion threw an error saying "Software update failed."
Haven't had time to read up on who else this may have happened to, but tried upgrading this morning via PC Companion and I recieved a fail message, asking to try again. Turned phone on - get the SE logo, then the bottom half of the screen looks like someone stepped on it - weird yellow graphic appears all scrambled! Will not boot up and my PC detects then un-detects phone continuously! Help! How do I fix this? Seems all the upgrade did was wipe my phone. Now it's but an empty piece of pretty plastic!!
Someone please help me!!
Hi all i have a Htc Mozart and when i go to do the new mango update i keep getting the same error i have to tried to use the help solution on zune but no joy.The error code is Error 801812C1 if anybody knows how to sort this i would appreciate it
Thanx Andy
Error
Hi matey, just stumbled upon a thread you might be interested in, Please press thanks if this helps:
http://forum.xda-developers.com/showthread.php?t=964896
Hi thanx for the reply I have tried that and still no joy
i might be able to help u as i ve the same problem when i tried to update yesterday if yr ph is on 7.0.7004.0 then be prepared to spend a few hrs unless u ve super speed connection as u ve to go tru 4 updates b4 u get mango n after that u get htc update.U only got 801812c1 i got 80004005 and c101007but i manage to sort it out thanks to a post i search on google the reason why we get the error is bcos the required driver cannot b installed as win can't recognise the device bcos of zune when the ph reboots after the connection to pc picture ok this is what u can try as it works for me perfectly : when u reach stage 6 of 9 the ph will be rebooting and going into pc connection mode and win starts driver installation but the problem is b4 it finishes the ph reboots so this is what u ve to do when u get error and installation stops,quickly press the camera button at the white screen don't let the ph boot exit the installation page( meantime holding camera button do not let go) but don't disconnect usb or exit zune u will be in the syn page and win will start installing driver again when it finds the elusive file Pxxxx ( all this while yr ph should be in the pc connection mode) the driver will be successfully installed. Go back to find updates again this time n this time when the update starts n reach stage 6 u won't see the popup driver installation.
i did all 5 updates in one sitting without disconnecting the ph and i don't ve the driver issue anymore nor any other errors i tried all the fixits and they don't help only the camera button solve it for me
one other thing if updates is checking yr disk space it can go on forever 1st time i did'nt know i left it for 50 mins u can just let it run for a while if nothing happens cancel go back to check update again and when u come back it will skip that step sometimes u ve to do it more than once . hope i helped enjoy yr updating ...
B4 update: os 7.0.7004.0
fw 2250.09.12803.728
radio 5.52.09.16.22.339.50.10u
bootloader 1.28.2205.3(113810)
Latest: os 7.10.7720.68
fw 2250.21.50001.728
radio 5.69.09.05a.22.50.50.21u
bootloader 5.0.2250.1(130781)
hi i tried wot you said still no joy here is the specs of my phone
OS version 7.0.7403.0
Firmware 2250.21.14201.206
Hardware 0004
Radio Software 5.66.09.09_22.46.50.21U
radio hardware A.102.0.D4
Bootloader 1.42.2250.1(123643)
Chip SOC 2.2.5.0
try this ...when u get the error exit the updating page disconnect the usb whilst ph is still in pc connection mode and reconnect usb n remember to let it boot up once u see driver successfully installed otherwise zune won't see yr ph hope this works
As the subject says guys, I rooted my gf's x10i and installed cwm via Flash tool 2.9.1. Was about to unlock the bootloader to install a custom rom when (I swear this was the dumbest moment in my entire life) I clicked the "Optimize button" (FOR NO REASON) I'm on 2.3.3, it said "phone rebooting", my phone did nothing so I disregarded it. however, when I restarted it, the phone went to the sony erricson screen and just shutdown and restarted again and again and again. I booted into cwm recovery but to my horror it kept saying sd card in use when i try to intall a zip from sd (which I learned from this site means it's the wrong ver. cwm for my phone) So the gist is phone restarts every 10-15 seconds, I can't use cwm properly because of the version. and flashtool because it keeps resetting so quickly.
PLEASE PLEASE HELP!!!!
just simply reflash ? or use SEUS to flash stock software ?
i just read it again an saw the part where flashing wont work but i seem to be able to reflash before getting the SE logo ?
Bjornlindekens said:
just simply reflash ? or use SEUS to flash stock software ?
i just read it again an saw the part where flashing wont work but i seem to be able to reflash before getting the SE logo ?
Click to expand...
Click to collapse
Ok so walk me through this because I'm pretty new to it. When you say you reflash before you get to the SE logo. Does the phone have to be in fastboot? (hold back button?) because flashtool detects it and then it disconnects due to the restart. THANKS FOR THE REPLY!!
the way i do it is
1 select what im flashing (then it will tell you to turn off phone etc.etc.)
2 remove battery
3 unplug phone
4 reconnect phone
5 hold back button and keep holding it
6 slide battery in while still holding back button
about 5-10 sec later it should get detected :s
i really hope this helps because i dont think theres anything you can do if you cant even manage to flash the phone :s
ill look for simular problems and/or info :s
---------- Post added at 04:32 PM ---------- Previous post was at 04:29 PM ----------
this might be a stupid question but try recharging the phone a while if your not doing that already .
The charge light doesn't come on and yea with the 15 second restart, as soon as it is detected, like a few seconds later it restars and says disconnected. I looked all over and there is noone I find with a similar boot loop. I tried wiping my data via cwm recovery but same problem.
Ok so this might be a dumb ass thing to ask but I will ne way. If I can get a backup of someone else's x10 would I be able to apply it via cwm? Or will that fail like the zip install?
i've bin looking around aswell and couldnt find any simular problem
so the only thing i can suggest is not keeping this in the X10 Q&A but try the general aswell this might attract more people scouting trough.
but tbh im unable to see any options because as im reading i collected this info.
1) cant fastboot/flash anything (no option there)
2) cant use CWM recovery cause its the wrong version and reads the internal flash memory (called sdcard) but not your external microsd card (called external1???)
(correct me if im wrong on the second one)
if this is the case what else is there ?
Hi, sorry about your problem. I don't know a lot about this phone but ill give you the steps that got me going when I had a different issue.
This was in an email directly from Sony, hopefully it'll help, if not then at least I tried.
To Repair your phone Software, please follow the steps below:
Click on this link to download PC Companion http://www.sonymobile.com/us/tools/pc-companion/ .
Turn the phone off and disconnect it from the computer. Run the Software.
1. No matter what the program says do not connect the phone until you complete step 9.
2. In the welcome screen if asked click on Start, next you will be shown what Media Go offers, click on "next" then you will see a presentation on what Support Zone offers, click on "Finish".
3. In the next section from "Support Zone” and "Media Go" new select “Support Zone" and click on start.
4. On the next page select "Software Update" and click on "Start".
***At this point if you get an error stating that "unable to install update components" or "server is busy”, please proceed to step 12.
5. The program will say that there is no phone connected and will ask you to connect but disregard that and instead choose the option to "Repair Phone". (The program will issue you a warning on the content that you will lose during the update).
that any data saved only in your phone memory will be erased as part of the Phone Repair.
6. Choose Continue.
7. After that, the program will download the necessary information (several minutes) and it will present you with a list of phones.
8. Choose the X10 from the list (close to the bottom of the list) by clicking on the icon for the phone. Then click on "Next". Then you will see a new section telling you how to connect the phone. (Don't connect it yet!).
At this point the phone must be off and disconnected from the PC.
9. Connect the cable to the PC but not to the phone, then while pressing and holding the back key (the one on the lower right part of the screen that has the icon of an arrow pointing to the left on top) Connect the cable to the phone and keep holding the back key until the program says "The update of your phone has started..." (In some cases a message of "Installing drivers" will appear before the message of "The update of your phone has started..." is shown.).
10. If the steps were not followed exactly the phone will turn on and it will request that you "Proceed with the following steps, slide down the notification bar".
happens disconnect the phone from the cable, turn it off and repeat from step 9).
11. If PC Companion proceeds correctly with the update it will tell you to release the back key.
the update to finish and follow instructions on the screen.
12. If you receive the message: “Unable to install update components".
a. Close PC Companion.
b. Install Java from: http://www.java.com.
c. Start Pc companion again and try to do the software unlock process once more
As part of Sony Mobile's commitment to excellent customer service, we offer a wide variety of mobile products to suit your lifestyle. If you require more information, or have any other questions, please visit www.sonymobile.com or call us at 1-866-766-9374.
Hey guys thanks a bunch, I reflashed using flashtool. Apparently once the flashing takes, flash mode stays on (go fig right? lol) I really do wanna say thank you to you guys who helped me esp Bjornlindekens (I hit thanks don't worry )
Hooray happy i could help and glad for ya to getting it running again! !
Sent from my X10 using xda premium