Related
UPDATE 08-20-11.Ok Guys, I have been getting quite a few PMs and replies to the post regarding the New (OTA) software update. Rather than replying to every post or PM Here is the Answer...
If you have updated your phone using the Offical OTA with the latest Hboot 1.50 Then you CANNOT Root your phone using the Revolutionary method. The Revolutionary Tool only supports 1.30 and 1.40 Hboot for NOW.
In short if you Update your phone in Excitment or without thinking you are SOL for NOW...
Update 08-17-11 As Pointed out by a few users there is an update to the revolutionary Tool it's now 0.4Pre4, I have updated the revolutionary Zip found in the link provided to include this new update...
First and foremost many thanks to Unrevoked,AlphaRev,TeamWin and all the other devs that have made this possible. Endless RESPECT & LOVE to the Devs...
Now on to the fun and EASY stuff. There are a lot of guide on how to final permanently root your Evo 3D. This to me is just another method and hopefully others who are having issues with doing the process will find this easy as 123... It may look like a lot of reading but it's very simple and detailed.
Hope This will help those who have been frustrated with other methods/guide
I have tired both ADB and this method to obtain S-Off and then custom recovery... I have also included all the files needed in 1 link to complete this steps.
***Link***http://www.mediafire.com/file/5w6hovty8y79wey/EVO 3D All Files Update 08-17-11.zip
AFTER DOWNLOADING ALL FILES PLEASE EXTRACT JUST THE REVOLUTIONARY FOLDER. PLACE THE OTHER THREE ZIP FILES AS IS ON THE ROOT OF YOUR SD CARD (PG86IMG_eng-hboot, su-2.3.6.3-efgh-fixed-unsigned AND TWR). tHE htc DRIVERS IS OPTONAL, IF YOU HAVE THE DRIVERS INSTALL THEN YOU CAN DELETE IT.
Prerequisite
STEP 1: S-Off & ClockWork Mod Recovery (CMR)
1. There are 4 zip files in the folder from the link provided, the ONLY 1 you should extract is the revolutionary folder. The other three files should remain as zip files and should be on the root of your SD card...
2. Make sure you have ADB enable on your device (Menu--Settings--Applications--Development-- USB Debugging).
3. Connect your phone to your PC, select charge only. If you do not have the HTC drivers installed then you show find the exe in the revolutionary folder. Run the .exe to install the HTC android phone usb device. To verify if the device has been install right click (My computer) or (computer) ---Manage-- Device Manager--Double click Disk drives. Your phone should be listed a usb device.
Once this is done4. Open up the revolutionary folder, you should copy/extract all the files by now. Run revolutionary.exe. You will now need to go to http://revolutionary.io/ to get your Beta key. Just click on download (u already have the file) so you don't have to save it. Enter your Hboot version and serial number, generate your key. Enter your key exactly as shown...
5.If you have successfully enter your key the S-off Process will begin. You will be prompted to download Clockwork Mod Recovery (CMR). hit Y and enter to install CMR... Your Phone should reboot and once you are on your home screen you should have S-Off... End of Step 1...
Ok now that you have obtain S-off it's Time for Team Win custom recovery Project (TWRP) + Eng H-boot. I would recommend you check to see if you have clockwork mod recovery before you continue. Power down your phone. REMOVE the battery, put it back in. Hold your hand on the volume down button while pressing the power button. release the power button after a few secs while still holding the volume down button. Your phone should boot to Hboot/bootloader menu. You should see S-off on the top. Now press volume down to select recovery and press the power button to boot into recovery. Your phone should boot into clockwork mod recovery. Make a nandroid backup of your system if you like. Now install "Super user fixed" seeing that you are already in recovery.
Go back to the clockwork mod recovery main menu if you did a back up, if not select install zip... look for su-2.3.6.3-efgh-fixed-unsigned and install/flash. reboot your phone. You can open your App draw to see if you have super user install Just for fun...
You are almost home...
STEP 2. Flash Eng Hboot, Team WIN recovery
1. Connect your phone to your computer and select disk drive, go to your SD card and look for PG86IMG_eng-hboot RENAME it to PG86IMG. If you do not have it on your SD card then copy/move it to the root of your SD card.
2. Remove your phone from the computer and power of your phone. Remove the battery and put it back in. Reboot into recovery (hold vol down + power button for a few secs). Your phone should boot to the bootloader and it should pick up the PG86IMG which is your eng-hboot.
3. Press the Vol up button for yes to flash the PG86IMG. Reboot your phone when done. You have now install your eng-hboot without ADB...
4. Connect your phone to your computer and select disk drive, go to your SD card and REMOVE or REMAIN the PG86IMG. I would recommend you just remove it. Make sure you have the zip folder TWR on your SD card. If not now is a good time to do so. Once this is done remove the phone from the computer and power down your phone. Remove the battery and then back in.
5. Boot into recovery once more (should be a semi pro by now ) Remember vol down and power for a few secs.
6. Go to recovery (vol down) then press power to select. Your phone should boot into clockwork mod recovery. Select install zip... look for TWR and flash/install it. Once down reboot your phone You have successfully install a custom recovery(Team WIN Recovery) AGAIN no ADB or fastboot... You can download quickboot from the market and boot into reocvery which should take u to Team WIN Recovery Project...
7. WE ARE ALL DONE, if you have follow these steps correctly....
***Link Again***http://www.mediafire.com/file/5w6hovty8y79wey/EVO 3D All Files Update 08-17-11.zip
Update 08-17-11 Alternate Method Greetings All,
Did not want to start a new Thread so am Adding an Alternate method for those of you who have been asking if you can Flash TWR and the Eng H-boot Via the Bootloader. The step above was a step by step guide for beginners. Here is the Alternate method for standard & advance users.
If you do not want to Flash the two Zips (Eng hboot, TWR) via recovery then do this:
Steps
1. Obtain S-Off via revolutionary (it is up to you if you want to flash CWR , works both ways...) Reboot... Once Done...
2. Connect your phone to your computer and select disk drive, go to your SD card and look for PG86IMG_eng-hboot RENAME it to PG86IMG
3.Boot into recovery, it should automatically pick up the PG86IMG and ask if you would like to update. Select Yes and once done reboot your phone.
4.Connect your phone to your computer and select disk drive, go to your SD card and REMOVE or REMAIN the PG86IMG. I would recommend you just remove it.
5. Now you will need to rename the TWR to PG86IMG, disconnect your phone from the PC once done.
6. Boot into recovery, it should automatically pick up the PG86IMG and ask if you would like to update. Select Yes and once done reboot your phone.
7. Important: You would need to go to recovery 1 final time to flash the Super User (su-2.3.6.3-efgh-fixed-unsigned).
ALL DONE ,yet another simple way to Root Your HTC EVO3D
JahNile
Evo 3D
Finally now With S-Off + Eng Hboot+ TWRP
Would it be possible to use your Eng Hboot without ClockWork Mod? I accidently hit no instead of yes, I can't figure out why ADB is not working.
You may be able to flash the eng hboot seeing that you now have S off. However you may not be able to flash superuser (SU) and TWR. This requires a custom recovery I believe. You can approach this a few ways. You can try to push the TWR via fastboot /adb then SU. You can also go back to S-On then start from the beginning again.
Both methods can be found in the forum. Good luck.
Sent from my PG86100 using Tapatalk
is this the same ENG Hboot version that was posted in another thread.
Yes all files are from the forum no changes. Just place them into 1 folder rather than post links to them... Try to make it as simple as possible 4 every 1.
Sent from my PG86100 using Tapatalk
Pretty good guide just a few comments that may prevent confusion.... A couple times you say reboot to recovery via power and volume but your are actually booting to bootloader then letting it find a .img or selecting recovery from the menu. I think that's what you were trying to say but like I said trying to prevent confusion. Also I'm almost 100% positive a back up made I'm CWM won't work with TWRP. Otherwise great job I'm sure there will be many people that will appreciate this guide and not having to use fastboot or adb.
Edit: changed a few things in my post... It's late and my brain is toast. Also you can hold off on installing CWM and just install TWRP from the bootloader after renaming it just like the hboot.
Sent from my PG86100 using XDA Premium App
Correct you can install TWR that way as well and def.ly u can reboot to the bootloader instead. Just wanted to be a little detailed. Tx 4 the editing.
If you want to install TWR VIA the bootloader you would need to rename the TWR zip to PG86IMG...
Btw u can flash TWR via clockwork. You r only flashing a zip file so it does work.
Sent from my PG86100 using Tapatalk
This guide looks a little easier.
Sent from my EVO3D
hey guys what are the advantages of the eng hboot for are phones other than the 1.30 and the 1.40?
Do you run into the problem with the error for not being able make calls receiev texts..etc?
Yes forgot to mention this. That happen to a few users who have rooted their evo 3D. Just call sprint and they will reset your profile no questions ask. Just tell them no voice services. Its actually a 5 mins or less call. Think its their new fraud protection system kicking in.
u should be up and running in no time easy. They gonna back you remove the battery then put it back In while they update your profile. Then they will have you place a test call and then the Rep will call u to confirm you can recv calls also.
Sent from my PG86100 using Tapatalk
If am not mistake for the most part The ENG hboot is what unlocks NAND protection. Without the NAND unlock, we wouldn't be able to flash ROMs or have custom recovery. Hope this helps.
Sent from my PG86100 using Tapatalk
Looks promising... Will try after work
Sent from my 3VO3D.
jahnile said:
If am not mistake for the most part The ENG hboot is what unlocks NAND protection. Without the NAND unlock, we wouldn't be able to flash ROMs or have custom recovery. Hope this helps.
Sent from my PG86100 using Tapatalk
Click to expand...
Click to collapse
The ENG HBOOT gives you access to more fastboot commands. For the average user you will not notice the difference. The only time you may need it is if you soft brick your phone... the extra fastboot commands can help you recover. Bottom line is better have it to be safe cause there are no negative side effects.
thanks
Nice guide appreciate the time you took to put this together..
Will try after work..
Anyone try this and worked out?
Sent from my PG86100 using XDA App
jahnile said:
Yes forgot to mention this. That happen to a few users who have rooted their evo 3D. Just call sprint and they will reset your profile no questions ask. Just tell them no voice services. Its actually a 5 mins or less call. Think its their new fraud protection system kicking in.
u should be up and running in no time easy. They gonna back you remove the battery then put it back In while they update your profile. Then they will have you place a test call and then the Rep will call u to confirm you can recv calls also.
Sent from my PG86100 using Tapatalk
Click to expand...
Click to collapse
All you gotta do is use the chat and tell them you cant text or call.
Does the wireless tethering work?
Sent from my PG86100 using Tapatalk
Once your are rooted any wireless tethering app should work. The wifi tether from Google on the market works. There are also some custom stock rom that includes the wifi tether app along with a working version of the sprint hotspot app.
Great guide..just a couple updates: CWM wouldn't download - failed all 3 times. But the way around it was turning the Hboot-ENG into a PG86IMG and went through the bootloader..did the same for TWP. Once in TWP i did the zip for SU.
Other than then, worked out great.
Beta key = cut and past simplest lol.
Is there a root method even if u are on hboot 1.15? Still new to the rooting game so pardon my newbishness. Is there a way to downgrade the hboot?
Sent from my EVO using xda app-developers app
http://forum.xda-developers.com/showthread.php?t=1771020
No problem figured it out by using bits and pieces of other's peoples work if you have S-off so:
Install TWRP recovery:
Download http://techerrata.com/file/twrp2/PJ7....2.0-jewel.zip
Rename that to PJ75IMG.ZIP and put it on the root of your SD card. Power down the phone and then hold the volume down and power button to go into the boot menu. It will find the PJ75IMG.ZIP file and want to install it. Follow the directions and install it.
Once you reboot the phone, rename or delete the PJ75IMG.ZIP file.
For root, then download CWM-SuperSU-v0.87.zip (attached), and copy it to the root folder of the external SD. Power down the phone and then hold the volume down and power button to go into the boot menu. Select the recovery menu and TWRP will come up. Install the CWM-SuperSU-v0.87.zip file and reboot. You now will have root.
Attached Files
CWM-SuperSU-v0.87.zip http://forum.xda-developers.com/attachment.php?attachmentid=1198846&d=1342319638
I don't have s-off, and I haven't rooted it yet. I literally just picked it up yesterday. Will that still work for me? And thanks for helping me out
Sent from my EVO using xda app-developers app
I don't believe that it will work with S-ON, but never tried it with S-ON either. Not going to tell you to try it, but think that it couldn't hurt your phone either considering that it would just fail or work. So with that you would have to try it as the risk of your phone, as with anything that you would do to modify stock ROM.
So while trying to update to ICS my fingers were working faster than my brain (yes, it happens) and I selected a menu option while using Clockwork and, while I'm not sure, I think the option said something like, "format .. OS...something..." before I could fully read it (and stop my finger from pressing the power button), I pressed the power button.
The phone rebooted, got to the white HTC screen and stopped - stuck on the white HTC screen. I pulled the battery.
I Held down power and up-volume and got to the bootloader menu, selected recovery and Clockwork came up.
Couldn't "Recover" because it couldn't mount the SD card.
Couldn't mount the external SD card either.
Ok - tried a factory reset - Rebooted - up came the white HTC screen where it stays until I pull the battery.
I'm new at this (probably didn't need to say that, but...).
How Do I get past this point?
Is this phone agonner?
How do I load (anything) to the phone at this point?
Thanks in advance! I appreciate it.
MilesTHD said:
So while trying to update to ICS my fingers were working faster than my brain (yes, it happens) and I selected a menu option while using Clockwork and, while I'm not sure, I think the option said something like, "format .. OS...something..." before I could fully read it (and stop my finger from pressing the power button), I pressed the power button.
The phone rebooted, got to the white HTC screen and stopped - stuck on the white HTC screen. I pulled the batter.
I Held down power and up-volume and got to the bootloader menu, selected recovery and Clockwork came up.
Couldn't "Recover" because it couldn't mound the SD card.
Couldn't mound the external SD card either.
Ok - tried a factory reset - Rebooted - up came the white HTC screen where it stays until I pull the battery.
I'm new at this (probably didn't need to say that, but...).
How Do I get past this point?
Is this phone agonner?
How do I load (anything) to the phone at this point?
Thanks in advance! I appreciate it.
Click to expand...
Click to collapse
Try using adb commands from your computer to push a recovery to your phone and go from there
Sent from my ADR6425LVW using xda app-developers app
If it powers on, you're not bricked.
Are s-on or s-off?
Make sure you have a card reader for the following.
The best thing for you to do would probably to flash an RUU.
First, download the latest RUU.
http://www.androidpolice.com/2012/0...ull-ruu-build-4-03-605-2-for-the-htc-rezound/
If you are s-on with unlocked boot loader, relock it:
Make sure there is no PH98IMG.ZIP on your sdcard. Delete if there is one.
Power off phone completely with battery pull.
Plug in phone to computer with USB.
Go to the bootloader menu with vol down + power.
Select fastboot.
On your computer, run the following fastboot command (do whatever you needed to do to use fastboot):
fastboot oem lock
After that is done, time to install the RUU.
Find the RUU you downloaded and put it on your sdcard, then rename to PH98IMG.ZIP
Put sdcard back, then power on to bootloader.
It should now scan for the PH98IMG and then ask you to install it.
Follow all the instructions to install it.
After you finish this, you will be back to the stock ROM with a locked boot loader.
If either s-off or s-on locked bootloader
Sent from my HTC Rezound using Tapatalk 2
Rezound still major messed up
THANK YOU for your help, I really appreciate your response. I followed your instructions and once the PH98IMG.zip file was on the SD card I loaded bootloader and it did scan for the file, but said "no file or wrong file!" Well, the file is there so I know its not "no" file. I've tried a couple of different PH98IMG files that I found on XDA but I guess the specific file wasn't the problem.
After it gives the error message it simple goes back to the bootloader and waits.
Unlocking the bootloader and then following your instructions did result in the file being seen and, what appeared to be, the installation process beginning - however when the phone reboots for the first time it just goes quiet and never comes back up. I waited for at least 20 minutes before I decided it wasn't just a long boot process.
I"m pretty sure there is NOTHING on this phone. I've verified there's nothing on the SD card besides the PH98IMG.zip file. Assuming I've completely wiped out the OS (and it is not on the phone) is the method you've outlined the right starting point?
Thanks again, and Merry Christmas
Miles
wlmeng11 said:
If it powers on, you're not bricked.
Are s-on or s-off?
Make sure you have a card reader for the following.
The best thing for you to do would probably to flash an RUU.
First, download the latest RUU.
If you are s-on with unlocked boot loader, relock it:
Make sure there is no PH98IMG.ZIP on your sdcard. Delete if there is one.
Power off phone completely with battery pull.
Plug in phone to computer with USB.
Go to the bootloader menu with vol down + power.
Select fastboot.
On your computer, run the following fastboot command (do whatever you needed to do to use fastboot):
fastboot oem lock
After that is done, time to install the RUU.
Find the RUU you downloaded and put it on your sdcard, then rename to PH98IMG.ZIP
Put sdcard back, then power on to bootloader.
It should now scan for the PH98IMG and then ask you to install it.
Follow all the instructions to install it.
After you finish this, you will be back to the stock ROM with a locked boot loader.
If either s-off or s-on locked bootloader
Sent from my HTC Rezound using Tapatalk 2
Click to expand...
Click to collapse
MilesTHD said:
THANK YOU for your help, I really appreciate your response. I followed your instructions and once the PH98IMG.zip file was on the SD card I loaded bootloader and it did scan for the file, but said "no file or wrong file!" Well, the file is there so I know its not "no" file. I've tried a couple of different PH98IMG files that I found on XDA but I guess the specific file wasn't the problem.
After it gives the error message it simple goes back to the bootloader and waits.
Unlocking the bootloader and then following your instructions did result in the file being seen and, what appeared to be, the installation process beginning - however when the phone reboots for the first time it just goes quiet and never comes back up. I waited for at least 20 minutes before I decided it wasn't just a long boot process.
I"m pretty sure there is NOTHING on this phone. I've verified there's nothing on the SD card besides the PH98IMG.zip file. Assuming I've completely wiped out the OS (and it is not on the phone) is the method you've outlined the right starting point?
Thanks again, and Merry Christmas
Miles
Click to expand...
Click to collapse
If you are S-on and have an unlocked bootloader, you will need to relock it before attempting to flash an ruu. Once re-locked, ensure that the PH98IMG is not a zip file within a zip file which is how they are usually uploaded. Attempt to unzip the files until it will not unzip anymore. That file that won't unzip needs to be the one you rename as PH98IMG and placed on the root of your SD card. Reboot to bootloader and allow it to scan. It will ask you if you wish to proceed and you will allow it. After some time it will reboot back to bootloader to flash radios and the rest of firmware. After that process and a 2nd reboot you should he back to stock, locked, and unrooted.
Sent from my Rezound using xda premium
Also, it could be possible that your phone can't recognize the sd card so it needs to be formatted.
Sent from my HTC Rezound using Tapatalk 2
zip file contents?
Maybe I should ask what the contents of the .zip file should be? I did check the zip to make sure it wasn't a double-zip. There were two versions of the PH98IMG file i tried. One had the file (imagemate-3.60.exe) the other had the file(s) (boot.img and android-info.txt).
I did "relock" the bootloader prior to trying and it would not recognize the file. When it was unlocked it would see it, start the install process, then go quiet. So that at least tells us that the file is there and likely workable.
I can't seem to get past the "No image or wrong image" message. I've tried on 3 different cards (the original and two fresh cards) and I've checked to ensure the zip is not a zip within a zip.
IAmTheOneTheyCallNeo said:
If you are S-on and have an unlocked bootloader, you will need to relock it before attempting to flash an ruu. Once re-locked, ensure that the PH98IMG is not a zip file within a zip file which is how they are usually uploaded. Attempt to unzip the files until it will not unzip anymore. That file that won't unzip needs to be the one you rename as PH98IMG and placed on the root of your SD card. Reboot to bootloader and allow it to scan. It will ask you if you wish to proceed and you will allow it. After some time it will reboot back to bootloader to flash radios and the rest of firmware. After that process and a 2nd reboot you should he back to stock, locked, and unrooted.
Sent from my Rezound using xda premium
Click to expand...
Click to collapse
MilesTHD said:
Maybe I should ask what the contents of the .zip file should be? I did check the zip to make sure it wasn't a double-zip. There were two versions of the PH98IMG file i tried. One had the file (imagemate-3.60.exe) the other had the file(s) (boot.img and android-info.txt).
I did "relock" the bootloader prior to trying and it would not recognize the file. When it was unlocked it would see it, start the install process, then go quiet. So that at least tells us that the file is there and likely workable.
I can't seem to get past the "No image or wrong image" message. I've tried on 3 different cards (the original and two fresh cards) and I've checked to ensure the zip is not a zip within a zip.
Click to expand...
Click to collapse
You should download that file from Android Police. It should have a 'bunch' of files in it. I"m not familiar with imagemate-3.60.exe but boot.img is just the kernel. Rename the file that you download to PH98img, (as previously stated) put it on a good SD card and boot into bootloader. It should go.
How about telling us if you are s-on or s-off. I don't see where you've answered that question. Also, if it doesn't work, tell us what your bootloader screen says. That will give us some info to help you.
Merry Christmas....I've got to go to bed before Santa shows up. :laugh::laugh:
EDIT: I just downloaded the Android Police file and as I said, it has a lot of files in it. I'm not sure what you were playing with but i likely the cause of you problem. Get the right file, name it ph98img.zip, put on root of SD, boot into bootloader (you're locked, right) and let it do its thing. good luck.
MilesTHD said:
Maybe I should ask what the contents of the .zip file should be? I did check the zip to make sure it wasn't a double-zip. There were two versions of the PH98IMG file i tried. One had the file (imagemate-3.60.exe) the other had the file(s) (boot.img and android-info.txt).
I did "relock" the bootloader prior to trying and it would not recognize the file. When it was unlocked it would see it, start the install process, then go quiet. So that at least tells us that the file is there and likely workable.
I can't seem to get past the "No image or wrong image" message. I've tried on 3 different cards (the original and two fresh cards) and I've checked to ensure the zip is not a zip within a zip.
Click to expand...
Click to collapse
One thing you need to know is that a PH98IMG file can be many things. It is only the name of a file that your phone looks for to use when booted into hboot. So it can be a kernel, an entire RUU (OS), a custom recovery or ROM... basically anything. It just means that item was packed into a PH98IMG file in order to run automatically off your SD card when the phone boots.
So you need to know what the PH98IMG file is that you are using or you might flash something you don't want that can possibly cause your phone to not work properly. In your examples above one is a kernel (boot.img) and I have no idea what imagemate-3.60.exe is. It sounds like you have not had the correct file.
Here is the global RUU you should run to get you back to stock with all the latest radios and firmware:
http://www.androidpolice.com/2012/0...ull-ruu-build-4-03-605-2-for-the-htc-rezound/
You need to be locked to run it so if you are S-ON, which it sounds like you are (don't remember if you mentioned that before), you need to use fastboot from your pc to do that, just like you did when you unlocked it with this command:
fastboot oem lock
***If you are S-OFF you should be locked again from that process already. But if you are S-OFF then confirm with someone to be sure it's safe to run the RUU, there's something about not relocking if you are on a certain hboot or you can brick it or something...***
Then put the RUU on your SD card and reboot the phone. Let it run through the RUU a few times because apparently it needs to do it a few times to get all the system files. Afterwards, if you want to root again and flash a custom ROM you will need to unlock again and flash a custom recovery and reroot.
It Works!
Not that I'm going to give you all the credit, because everyone kinda chipped in - however you DID provide the ONLY correct link to exactly what I needed! LORDY there are a lot of bad links being passed around. THANK YOU Ms. Feralicious, I totally appreciate your help.
... Everyone else as well - very generous with your knowledge and time and I will always love you.
Merry Christmas! Have a safe new year as well!
Miles
feralicious said:
One thing you need to know is that a PH98IMG file can be many things. It is only the name of a file that your phone looks for to use when booted into hboot. So it can be a kernel, an entire RUU (OS), a custom recovery or ROM... basically anything. It just means that item was packed into a PH98IMG file in order to run automatically off your SD card when the phone boots.
So you need to know what the PH98IMG file is that you are using or you might flash something you don't want that can possibly cause your phone to not work properly. In your examples above one is a kernel (boot.img) and I have no idea what imagemate-3.60.exe is. It sounds like you have not had the correct file.
Here is the global RUU you should run to get you back to stock with all the latest radios and firmware:
You need to be locked to run it so if you are S-ON, which it sounds like you are (don't remember if you mentioned that before), you need to use fastboot from your pc to do that, just like you did when you unlocked it with this command:
fastboot oem lock
***If you are S-OFF you should be locked again from that process already. But if you are S-OFF then confirm with someone to be sure it's safe to run the RUU, there's something about not relocking if you are on a certain hboot or you can brick it or something...***
Then put the RUU on your SD card and reboot the phone. Let it run through the RUU a few times because apparently it needs to do it a few times to get all the system files. Afterwards, if you want to root again and flash a custom ROM you will need to unlock again and flash a custom recovery and reroot.
Click to expand...
Click to collapse
Followed these directions & update fails...Please help.
Have PH98IMG.zip on sd card.
Gets this far...
*** LOCKED ***
VIGOR PVT SHIP S-ON RL
HBOOT-2.11.0000
eMMC-boot
HBOOT
Parsing...[SD ZIP]
[1]...
...[18]
...start update?
<VOL UP>
Next to "[1] BOOTLOADER" "- Fail-PU"
And below [18]..., "Partition update fail!"
"Update Fail!"
"Press <POWER> to reboot."
It's an HTC Rezound I'm trying to get back to stock, Verizon.
Any ideas?
It's locked which means it's never been unlocked and it's s-on. A simple factory reset within the rom itself will suffice
Sent from my Rezound using xda premium
rut-row...running rezound reset from rom repeatedly ravaging me :-O
IAmTheOneTheyCallNeo said:
It's locked which means it's never been unlocked and it's s-on. A simple factory reset within the rom itself will suffice
Sent from my Rezound using xda premium
Click to expand...
Click to collapse
When running rom, ...
"RUU_VIGOR_ICS_35_S_VERIZON_WWE_3.14.605.12_Radio_RS_1.22.10.0424r_3622A_MR3_9
K_release_270509_signed.exe" ...
ends in usb error 170...
Anyone having any pointers for me will be worshiped indefinately!
Thank-You and I'm-not-worthy, in advance,
Tom
screen shots
TommyJames said:
When running rom, ...
"RUU_VIGOR_ICS_35_S_VERIZON_WWE_3.14.605.12_Radio_RS_1.22.10.0424r_3622A_MR3_9
K_release_270509_signed.exe" ...
ends in usb error 170...
Anyone having any pointers for me will be worshiped indefinately!
Thank-You and I'm-not-worthy, in advance,
Tom
Click to expand...
Click to collapse
attached error window pic.
TommyJames said:
attached error window pic.
Click to expand...
Click to collapse
Try putting the PH98IMG.ZIP on your sdcard manually.
Sent from my HTC Rezound using Tapatalk 2
TommyJames said:
When running rom, ...
"RUU_VIGOR_ICS_35_S_VERIZON_WWE_3.14.605.12_Radio_RS_1.22.10.0424r_3622A_MR3_9
K_release_270509_signed.exe" ...
ends in usb error 170...
Anyone having any pointers for me will be worshiped indefinately!
Thank-You and I'm-not-worthy, in advance,
Tom
Click to expand...
Click to collapse
Not sure what you're trying to do there, run an RUU?
Did you try a factory reset from the settings of the phone as Neo suggested?
Settings > Storage > Factory data reset
But back up anything you want to save such as pics, settings, etc... it will wipe everything.
same thing happens...
TommyJames said:
Have PH98IMG.zip on sd card.
Gets this far...
*** LOCKED ***
VIGOR PVT SHIP S-ON RL
HBOOT-2.11.0000
eMMC-boot
HBOOT
Parsing...[SD ZIP]
[1]...
...[18]
...start update?
<VOL UP>
Next to "[1] BOOTLOADER" "- Fail-PU"
And below [18]..., "Partition update fail!"
"Update Fail!"
"Press <POWER> to reboot."
It's an HTC Rezound I'm trying to get back to stock, Verizon.
Any ideas?
Click to expand...
Click to collapse
same thing happens...
TommyJames said:
same thing happens...
Click to expand...
Click to collapse
You still needing help?
Where did you get the PH...img file you are using? Are you sure it's an RUU?
Did you ever try resetting to factory settings within the phone? You don't need to RUU for that, check a few posts up on where to find the setting.
Anyone that could help me out with this, I would be so grateful. I am new at this, this is my very first post, and I'm looking up to you guys as my super hero! I have checked threads for the past 7 hours and cannot find out how to fix the following problem. I have found threads addressing similar issues but always find something that is slightly different and cannot help, I think I have a unique situation.
In a nut shell, my current objective is to restore the phone back to factory settings.
-Phone WAS running on Sense 3.6, ICS 4.0 <-ICS came preinstalled with the carrier
- I succesfully rooted the phone via the 'Hasoon Amaze all in 1 kit', downloaded 4EXT 1.0.0.5RC3, and tried to load the Cyanogen CM 10 jellybean rom
-Where it was stuck on the Cyanogen splash screen
-Figured out it was because my phone was set to S-ON via the bootloader screen, which HTC prevents cutsom roms from loading apparently
-Could not figure out how to remove the CM10 rom from automatically loading up, so I figited around in the 4EXT, and wiped everything
-Current Rom (according to 4EXT is 'Unknown')
Where I am right now:
- Stuck at HTC splash screen
- Only things I can access is the bootloader and 4EXT ( via battery out, volume down at restart)
-Cannot connect the through USB to modify the anything on internal SD card (I cannot access the phones internal drive through the computer)
-Cannot access SD card through 4EXT (it cannot locate it)
-I have tried to factory reset from the bootloader screen - takes me to 4ext. I have tried to factory reset from 4ext, takes me to the frozen HTC logo.
-With not being able to connect via USB, I cannot load anything else (zip files) onto the phone from the computer.
I have no idea what to do now Did I delete some important factory recovery file when I wiped the phone from 4EXT?
The idea was, that I'd install Jellybean as a ROM, I don't like HTC sense, I wanted google now, and I failed. I would REALLY appreciate it IF you can help and are in Toronto, beers on me.
jonnybbadd said:
Anyone that could help me out with this, I would be so grateful. I am new at this, this is my very first post, and I'm looking up to you guys as my super hero! I have checked threads for the past 7 hours and cannot find out how to fix the following problem. I have found threads addressing similar issues but always find something that is slightly different and cannot help, I think I have a unique situation.
In a nut shell, my current objective is to restore the phone back to factory settings.
-Phone WAS running on Sense 3.6, ICS 4.0 <-ICS came preinstalled with the carrier
- I succesfully rooted the phone via the 'Hasoon Amaze all in 1 kit', downloaded 4EXT 1.0.0.5RC3, and tried to load the Cyanogen CM 10 jellybean rom
-Where it was stuck on the Cyanogen splash screen
-Figured out it was because my phone was set to S-ON via the bootloader screen, which HTC prevents cutsom roms from loading apparently
-Could not figure out how to remove the CM10 rom from automatically loading up, so I figited around in the 4EXT, and wiped everything
-Current Rom (according to 4EXT is 'Unknown')
Where I am right now:
- Stuck at HTC splash screen
- Only things I can access is the bootloader and 4EXT ( via battery out, volume down at restart)
-Cannot connect the through USB to modify the anything on internal SD card (I cannot access the phones internal drive through the computer)
-Cannot access SD card through 4EXT (it cannot locate it)
-I have tried to factory reset from the bootloader screen - takes me to 4ext. I have tried to factory reset from 4ext, takes me to the frozen HTC logo.
-With not being able to connect via USB, I cannot load anything else (zip files) onto the phone from the computer.
I have no idea what to do now Did I delete some important factory recovery file when I wiped the phone from 4EXT?
The idea was, that I'd install Jellybean as a ROM, I don't like HTC sense, I wanted google now, and I failed. I would REALLY appreciate it IF you can help and are in Toronto, beers on me.
Click to expand...
Click to collapse
since your phone came ICS preinstalled it'll be a lil easy choose the correct carrier and download the Latest stock ruu from there and Rename the RUU to PH85IMG.zip and place it on the root of your external sd card. Once this file is on the SDcard, do a battery pull, then turn the device back on while holding down the VOLUME DOWN button.once your in bootloader it will prompt you to install, select yes and then it'll flash then flash 4ext after that..when your flashing another rom always run this super wipescript from 4ext..it is IMPORTANT to do a full wipe before flashing another rom..
ravike14 said:
since your phone came ICS preinstalled it'll be a lil easy choose the correct carrier and download the Latest stock ruu from there and Rename the RUU to PH85IMG.zip and place it on the root of your external sd card. Once this file is on the SDcard, do a battery pull, then turn the device back on while holding down the VOLUME DOWN button.once your in bootloader it will prompt you to install, select yes and then it'll flash then flash 4ext after that..when your flashing another rom always run this super wipescript from 4ext..it is IMPORTANT to do a full wipe before flashing another rom..
Click to expand...
Click to collapse
Hey Ravike - thanks so much for taking the time to help me out. Remember, I am new, so please correct me if I am wrong understanding what you mean in this solution. Do you mean to say to follow these steps;
1) Get an external SD card from a store (I do not have one)
2) Find a way to load the said .zip file on to the External SD card (I cannot transfer the file from computer directly to the external SD card via phone USB connection as it is not showing up as a mounted drive in My Computer - I would have to have a friend put the file onto it some other way), then insert the card into the phone
3) I am a little curious about this one -- And once the file is on the external SD card, load bootloader (on the phone) and bootloader will automatically recognize that this file is on the external SD card and prompt me to install it? (Again I am new, but from what I've seen it just doesn't seem like bootloader has that kind of functionality -- prompting)
4) If step 3 is true, it will end up putting me into 4ext.
-If you confirm these steps, then what happens after I end up in 4ext after step 4)? What happens and where am I in my quest to reset to factory
-If you do not confirm these steps, would you be so kind as to detail where I went wrong?
I just want to as sure as I can before going out to a store and actually buying an external SD card.
Again, thanks SO much for this, I really do appreciate it.
jonnybbadd said:
Hey Ravike - thanks so much for taking the time to help me out. Remember, I am new, so please correct me if I am wrong understanding what you mean in this solution. Do you mean to say to follow these steps;
1) Get an external SD card from a store (I do not have one)
2) Find a way to load the said .zip file on to the External SD card (I cannot transfer the file from computer directly to the external SD card via phone USB connection as it is not showing up as a mounted drive in My Computer - I would have to have a friend put the file onto it some other way), then insert the card into the phone
3) I am a little curious about this one -- And once the file is on the external SD card, load bootloader (on the phone) and bootloader will automatically recognize that this file is on the external SD card and prompt me to install it? (Again I am new, but from what I've seen it just doesn't seem like bootloader has that kind of functionality -- prompting)
4) If step 3 is true, it will end up putting me into 4ext.
-If you confirm these steps, then what happens after I end up in 4ext after step 4)? What happens and where am I in my quest to reset to factory
-If you do not confirm these steps, would you be so kind as to detail where I went wrong?
I just want to as sure as I can before going out to a store and actually buying an external SD card.
Again, thanks SO much for this, I really do appreciate it.
Click to expand...
Click to collapse
1.yup you have to have a sd card dont buy a huge one even 2GB is enough (i'm using a 2GB for flashing n stuff)
2.well try the option called ''toggle usb storage'' from 4ext it mounts your int n ext sd card on pc aswell if it doesnt work then ask one of your friends or take a card reader or something?
3.well when you boot into bootloader most of the times your in fastboot mode so make sure your in the right mode the option you should be seeing will appear as ''fastboot,recovery,factory rest,clear storage,simlock image crc'' simply all you have to do is go to bootloader option and press power button
4. try it first :good:
Soubds like you dont have smartflash enabled in 4ext... or did I miss that part somewhere?
aj_2423 said:
Soubds like you dont have smartflash enabled in 4ext... or did I miss that part somewhere?
Click to expand...
Click to collapse
somehow he has flash cm10 and it has stuck on splash screen and now it doesnt detect his sd card nor do a factory rest sounds like his 4ext is not functioning well :S
ravike14 said:
1.yup you have to have a sd card dont buy a huge one even 2GB is enough (i'm using a 2GB for flashing n stuff)
2.well try the option called ''toggle usb storage'' from 4ext it mounts your int n ext sd card on pc aswell if it doesnt work then ask one of your friends or take a card reader or something?
3.well when you boot into bootloader most of the times your in fastboot mode so make sure your in the right mode the option you should be seeing will appear as ''fastboot,recovery,factory rest,clear storage,simlock image crc'' simply all you have to do is go to bootloader option and press power button
4. try it first :good:
Click to expand...
Click to collapse
Hey Again. Still stuck. Just a quick note that my carrier is Mobilicity. Here is what I've done so far since we last talked.
1) I got an external SD card
2) I loaded the file within the link you gave me "OTA_RUBY_ICS_35_S_DAVE_CA_2.14.1800.6-1.45.1800.2_R_release_263099viknauioz1fkgotb.zip" ,and renamed it to "PH85IMG.zip", as you said (I think - this is the zip file in the link Latest stock ruu you provided under Mobilicity) on the root of the external SD card
I note that there is another file in that link under mobilicity named "RUU_Ruby_DAVE_CA_1.45.1800.2_R_Radio_1.09.550L.11v 2DC_30.67.550L.09_release_227348_signed.exe"
3) Bootloader recognized there was a file there and tried to work it's magic but it failed and took me back to boot loader.
Which file do I rename to PH85IMG.zip? The exe or the zip? And what to I do with whatever file happens to be the one that I am not renaming to PH85IMG.zip? And where do I put it?
To answer the other fellow - I have tried enabling smartflash either way. And the CM10 rom is gone now. So is the stock rom. There is no rom running at all. It's just the HTC logo screen and does nothing. I can access Bootloader screen and 4ext through bootloader, but that's it.
THANKS!!!
jonnybbadd said:
Hey Again. Still stuck. Just a quick note that my carrier is Mobilicity. Here is what I've done so far since we last talked.
1) I got an external SD card
2) I loaded the file within the link you gave me "OTA_RUBY_ICS_35_S_DAVE_CA_2.14.1800.6-1.45.1800.2_R_release_263099viknauioz1fkgotb.zip" ,and renamed it to "PH85IMG.zip", as you said (I think - this is the zip file in the link Latest stock ruu you provided under Mobilicity) on the root of the external SD card
I note that there is another file in that link under mobilicity named "RUU_Ruby_DAVE_CA_1.45.1800.2_R_Radio_1.09.550L.11v 2DC_30.67.550L.09_release_227348_signed.exe"
3) Bootloader recognized there was a file there and tried to work it's magic but it failed and took me back to boot loader.
Which file do I rename to PH85IMG.zip? The exe or the zip? And what to I do with whatever file happens to be the one that I am not renaming to PH85IMG.zip? And where do I put it?
To answer the other fellow - I have tried enabling smartflash either way. And the CM10 rom is gone now. So is the stock rom. There is no rom running at all. It's just the HTC logo screen and does nothing. I can access Bootloader screen and 4ext through bootloader, but that's it.
THANKS!!!
Click to expand...
Click to collapse
The zip one ofcourse rename it as I've mentioned if it doesnt recognize try relocking the bootloader and flash it then it should be okay
Sent from my HTC Amaze 4G
Juopunutbear S-OFF
Super CID
bootloader unlocked
Powered by Faux Kernel V024
HBOOT : 1.93.2222
hit the thanks button if i've helped you :good:
ravike14 said:
The zip one ofcourse rename it as I've mentioned if it doesnt recognize try relocking the bootloader and flash it then it should be okay
Sent from my HTC Amaze 4G
Juopunutbear S-OFF
Super CID
bootloader unlocked
Powered by Faux Kernel V024
HBOOT : 1.93.2222
hit the thanks button if i've helped you :good:
Click to expand...
Click to collapse
Thanks Ravike! Still stuck though brother!
1) How to I 'relock the bootloader'?
2) I'm soooo new, what do you mean by 'flash it'? What's the procedure for flashing in this situation?
3) Also, what do I do with the other exe file or is it not important?
4) Is there any settings in 4EXT I need to ensure are on, or mounted or enabled?
Other things to note (may be useful for answer):
- When I rename the zip to PH85IMG.zip and go into bootloader, the following shows up in HBoot:
ph85diag.zip no image!
ph85diag.nbh no or wrong image!
PH85IMG.zip loads up, a blue progress bar eventually finishes, then it says
PH85IMG.zip ... checking
PH85IMG.zip ... parsing
Then it brings me back to the default bootloader screen and back to where we started. This may be where your solution of flashing comes into play of 'relocking' and 'flashing'? I don't know, hope you do!
jonnybbadd said:
Thanks Ravike! Still stuck though brother!
1) How to I 'relock the bootloader'?
2) I'm soooo new, what do you mean by 'flash it'? What's the procedure for flashing in this situation?
3) Also, what do I do with the other exe file or is it not important?
4) Is there any settings in 4EXT I need to ensure are on, or mounted or enabled?
Other things to note (may be useful for answer):
- When I rename the zip to PH85IMG.zip and go into bootloader, the following shows up in HBoot:
ph85diag.zip no image!
ph85diag.nbh no or wrong image!
PH85IMG.zip loads up, a blue progress bar eventually finishes, then it says
PH85IMG.zip ... checking
PH85IMG.zip ... parsing
Then it brings me back to the default bootloader screen and back to where we started. This may be where your solution of flashing comes into play of 'relocking' and 'flashing'? I don't know, hope you do!
Click to expand...
Click to collapse
Ya relock the bootloader. Use hasoons toolkit or adb command is ... fastboot oem lock
aj_2423 said:
Ya relock the bootloader. Use hasoons toolkit or adb command is ... fastboot oem lock
Click to expand...
Click to collapse
Yeah man, but I can't connect send any singals from the computer. Computer won't recognize the phone as a drive. The bridge is broken. Can only tranfer files via external usb
jonnybbadd said:
Yeah man, but I can't connect send any singals from the computer. Computer won't recognize the phone as a drive. The bridge is broken. Can only tranfer files via external usb
Click to expand...
Click to collapse
Even with the phone booted into fastboot?
aj_2423 said:
Ya relock the bootloader. Use hasoons toolkit or adb command is ... fastboot oem lock
Click to expand...
Click to collapse
Hey uninstall all the HTC drivers and install them back it happen to me once aswell....Got lucky jonny?? It rhymes
Sent from my HTC Amaze 4G
Juopunutbear S-OFF
Super CID
bootloader unlocked
Powered by Faux Kernel V024
HBOOT : 1.93.2222
hit the thanks button if i've helped you :good:
ravike14 said:
Hey uninstall all the HTC drivers and install them back it happen to me once aswell....Got lucky jonny?? It rhymes
Sent from my HTC Amaze 4G
Juopunutbear S-OFF
Super CID
bootloader unlocked
Powered by Faux Kernel V024
HBOOT : 1.93.2222
hit the thanks button if i've helped you :good:
Click to expand...
Click to collapse
Okay, somewhat good news (I think)...
I did manage to relock the bootloader in fastboot using the all in one toolkit. It looks like yes, it will send commands via fastboot mode.
In HBoot, It did something differently this time....
It used to say:
ph85diag.zip no image!
ph85diag.nbh no or wrong image!
PH85IMG.zip loads up, a blue progress bar eventually finishes, then it says
PH85IMG.zip ... checking
PH85IMG.zip ... parsing
Now it says:
ph85diag.zip no image!
ph85diag.nbh no or wrong image!
PH85IMG.zip loads up, a blue progress bar eventually finishes, then it says
PH85IMG.zip ... checking <-----this time with a yellow progress bar
Then it takes me back to the bootloader screen.
- tried to hit recovery (which usually takes me into 4ext, and it reboots the phone and back into bootloader)
-Factory reset also reboots the phone and back into bootloader
-If I go into fastboot, and hit reboot it also reboots the phone and back into bootloader
-At one point, I saw the yellow status bar on the HTC logo screen and it took me back into bootloader
-Each time it goes into bootloader, it follows the process of detecting the zip file mentioned above, but then it ultimately puts me back into bootloader
So now, here is where I am,
-The bootloader is relocked
-HTC logo/splash screen no longer freezes, yellow progress bar appears in top right corner and puts me into bootloader
-Cannot seem to access 4ext anymore
-Able to send commands to phone via All in 1 kit 3.2 with phone connected in Fastboot mode
-RUU zip is on External card, which gets read in Hboot, but throws me back into bootloader mode
Keep 'em comin' boys! I'd be so grateful if we could solve this! Are we almost there yet? LOL
jonnybbadd said:
Okay, somewhat good news (I think)...
I did manage to relock the bootloader in fastboot using the all in one toolkit. It looks like yes, it will send commands via fastboot mode.
In HBoot, It did something differently this time....
It used to say:
ph85diag.zip no image!
ph85diag.nbh no or wrong image!
PH85IMG.zip loads up, a blue progress bar eventually finishes, then it says
PH85IMG.zip ... checking
PH85IMG.zip ... parsing
Now it says:
ph85diag.zip no image!
ph85diag.nbh no or wrong image!
PH85IMG.zip loads up, a blue progress bar eventually finishes, then it says
PH85IMG.zip ... checking <-----this time with a yellow progress bar
Then it takes me back to the bootloader screen.
- tried to hit recovery (which usually takes me into 4ext, and it reboots the phone and back into bootloader)
-Factory reset also reboots the phone and back into bootloader
-If I go into fastboot, and hit reboot it also reboots the phone and back into bootloader
-At one point, I saw the yellow status bar on the HTC logo screen and it took me back into bootloader
-Each time it goes into bootloader, it follows the process of detecting the zip file mentioned above, but then it ultimately puts me back into bootloader
So now, here is where I am,
-The bootloader is relocked
-HTC logo/splash screen no longer freezes, yellow progress bar appears in top right corner and puts me into bootloader
-Cannot seem to access 4ext anymore
-Able to send commands to phone via All in 1 kit 3.2 with phone connected in Fastboot mode
-RUU zip is on External card, which gets read in Hboot, but throws me back into bootloader mode
Keep 'em comin' boys! I'd be so grateful if we could solve this! Are we almost there yet? LOL
Click to expand...
Click to collapse
Hmm unlock the bootloader and flash 4ext then try flashing sportsstar89 ota update..you can find it in dev section
Sent from my HTC Amaze 4G
Juopunutbear S-OFF
Super CID
bootloader unlocked
Powered by Faux Kernel V024
HBOOT : 1.93.2222
hit the thanks button if i've helped you :good:
ravike14 said:
Hmm unlock the bootloader and flash 4ext then try flashing sportsstar89 ota update..you can find it in dev section
Sent from my HTC Amaze 4G
Juopunutbear S-OFF
Super CID
bootloader unlocked
Powered by Faux Kernel V024
HBOOT : 1.93.2222
hit the thanks button if i've helped you :good:
Click to expand...
Click to collapse
Thanks for helping me bro. I really don't know alot though. I am in 4ext again, just not sure what I am looking for (OTA update) and not sure how to flash something within 4ext? I only know how to direct commends via hansoon all in 1...
jonnybbadd said:
Thanks for helping me bro. I really don't know alot though. I am in 4ext again, just not sure what I am looking for (OTA update) and not sure how to flash something within 4ext? I only know how to direct commends via hansoon all in 1...
Click to expand...
Click to collapse
the OTA download it and place it on your sd card and go to 4ext>>install from sdcard>>choose zip from sdcard>>ext_sd>>the ota remove the cable from phone before doing it
ravike14 said:
the OTA download it and place it on your sd card and go to 4ext>>install from sdcard>>choose zip from sdcard>>ext_sd>>the ota remove the cable from phone before doing it
Click to expand...
Click to collapse
Thanks I will try that. Just one thing. I think....... I think..... I think..... that I can avoid a whole lot of problems if I knew how to get the phone to S-OFF. I just have no idea how to do that and google has been of no help. Any idea?
I'll let u know about the OA
ravike14 said:
the OTA download it and place it on your sd card and go to 4ext>>install from sdcard>>choose zip from sdcard>>ext_sd>>the ota remove the cable from phone before doing it
Click to expand...
Click to collapse
the OTA you gave me is for TMobile? That's a different carrier in a different country... should I proceed with that?
jonnybbadd said:
the OTA you gave me is for TMobile? That's a different carrier in a different country... should I proceed with that?
Click to expand...
Click to collapse
Yea all problems will be solved if you s off..for info on how to do it click s off on my signature and yea its tmobile and yea won't harm you
Sent from my HTC Amaze 4G
Juopunutbear S-OFF
Super CID
bootloader unlocked
Powered by Faux Kernel V024
HBOOT : 1.93.2222
hit the thanks button if i've helped you :good:
So I just came back to my redound and after realizing I manged to spill stuff on it while storing it in my drawer i finally got it booting and now have a question about root and recovery. So I'm trying to flash custom roms and recovery to but I noticed it says I'm s-off and I remember going s-off but whats odd is I remember being rooted to do it however now i have no root or custom recovery and I'm just curious what steps to take to return to root and custom recovery. Thanks in advance.
Truemeaningoffear said:
So I just came back to my redound and after realizing I manged to spill stuff on it while storing it in my drawer i finally got it booting and now have a question about root and recovery. So I'm trying to flash custom roms and recovery to but I noticed it says I'm s-off and I remember going s-off but whats odd is I remember being rooted to do it however now i have no root or custom recovery and I'm just curious what steps to take to return to root and custom recovery. Thanks in advance.
Click to expand...
Click to collapse
Custom Recovery
http://forum.xda-developers.com/showthread.php?t=1902381&highlight=recovery
1) Go to this thread, download the attachment named TWRP_2.6.0.0_Vigor_PH98IMG.zip, put it on the root of your SD Card and delete the part of the name before the PH98IMG.
2) Boot into the bootloader
2a) Power Off your phone
2b) Remove and reinsert battery
2c) Hold Vol Down and Power until bootloader shows
3) Follow instructions on bootloader screen and press Vol Up (i think) when it tells you to.
Root
If you are installing a custom rom, root will generally be taken care of for you.
If you have questions feel free to ask.