....I think I did it....just trying to downgrade from HC to GB, in this condition:
- reboot in bootloader
- Relocked the OEM via fastboot
- trying to flash the RUU straight from Windows.....and fail....
results:
- can't go into recovery
- can't boot my device
- I can access only the bootloader and Hboot
can I fix it? any help is welcome! thanks in advance!
Wrong section
How far did it get in the ruu?
You can likely get out of your state by unlocking your hboot again using same htc unlock. Will boot back into hc. Just follow the last steps from HTC
Sent from my HTC Flyer P510e using xda premium
maybe you have a wrong RUU, try flash recovery using fastboot, or find a correct RUU that suit you cid.
What hboot version do you have now? Still the HC one?
Flash the recovery.img again and try it again.
nickiberli said:
what hboot version do you have now? Still the hc one?
Flash the recovery.img again and try it again.
Click to expand...
Click to collapse
hboot-1.11.0006
mcord11758 said:
How far did it get in the ruu?
Sent from my HTC Flyer P510e using xda premium
Click to expand...
Click to collapse
if failing when is updating the signature, about 25%....I think ...far enough, right?
Did you try to flash the recovery again?
yes ! It doesn't work!
how can I re-unlock the bootloader?
ovigt71 said:
how can I re-unlock the bootloader?
Click to expand...
Click to collapse
You should have the unlock_code.bin from the first time. Then
Step 12
In the command prompt type: fastboot flash unlocktoken Unlock_code.bin. In the command prompt you will see the following message:
Step 13
On your phone you will now see the disclaimer. Please read this carefully as this action may void your warranty. Use the Volume buttons to highlight your choice, and the Power button to make your selection. If you select Yes, your phone will be reset to its’ factory default settings, and your bootloader will be unlocked. If you select No, your phone will reboot and no modifications will have been made. from my HTC Flyer P510e using xda premium
still doesn't work; i got this in terminal:
" Ovidiu-Georges-MacBook-Pro: platform-tools ovigt71$ ./fastboot devices
HT156T401184 fastboot
Ovidiu-Georges-MacBook-Pro: platform-tools ovigt71$ ./fastboot flash unlocktoken Unlock_code.bin
error: cannot load 'Unlock_code.bin' "
Do you have the unlock _code.bin in the same directory as fastboot
mcord11758 said:
Do you have the unlock _code.bin in the same directory as fastboot
Click to expand...
Click to collapse
thanks man! I forget about that....(stress). I'm back in recovery mode... I'll try to revert to GB now.... thanks to everybody! I see is not booting in HC...is stuck in boot loop with " HTC quietly brilliant" ....
finally, back to GB! Thanks for help guys!
Related
This will return/update your device's software to 2.17.651.5 Stock (Relocked/Unrooted)
I'm making this guide for people who want to Unroot/Relock, having problems with their phones or return to Sprint's Stock.
"If you updated from 2.08 to 2.17 and are having issues unlocking. I recommend doing the steps below and try to unlock your device again The RUU also fixes a glitch on some phone who aren't getting the Bootloader Unlock screen."
>>>Know this will also update your hboot to 1.50.0000<<<
Works with CDMA S-ON and S-OFF Evo 3D.
For Mac users, replace “fastboot” with “./fastboot-mac” in the instructions below.
For Linux users, replace “fastboot” with “./fastboot-linux” in the instructions below.
Click to expand...
Click to collapse
____________________________
_______________________________________
CONTENT NEEDED.
Rootevo3dnew.zip
Evo 3D RUU_2.17.651.5.exe
RUU Mirror
Make sure to download the correct RUU
"RUU_Shooter_S_Sprint_WWE_2.17.651.5_Radio_1.06.00.1216"
________________________________________
_______________________________________________
S-ON Users
S-off users don't relock your bootloader until your at the very end.
Relock Bootloader
Do step 1 and step 2 first
Remove USB from phone (If connected)
Turn off device by taking out the battery and placing it back in .
(Remove SD Card and dont place back until told to do so)
Press Volume down then Power button.(Hold until you see the bootloader screen)
Select Fastboot and press Power button.
Connect USB.
You should now be on Fastboot USB.
Type these commands on cmd or terminal.
-Windows
Code:
[B]cd \rootevo3dnew[/B]
-Mac,Linux
Code:
[B]cd /rootevo3dnew[/B]
Now type.
Code:
[B]fastboot oem lock[/B]
______________________________________________________
-Lets begin
Step 1. Extract the rootevo3dnew.zip file and place it on C:\ Drive
Step 2. For Windows, install the HTC drivers HTCDriver3.0.0.007.exe in the zip file. For Linux and Mac you don’t need to install drivers.
Step 3. Enter bootloader and put your device in "Fastboot USB" (Make sure you have your phone connected to your computer
Step 4. Run the RUU.exe and follow the steps to update your device.
Step 5. Your device will reboot and you will be back to stock
Note- Most devices will enter bootloader and will show **Security Warning**
Click to expand...
Click to collapse
DO NOT TURN OFF YOUR DEVICE DURING THE UPDATING PROCESS.
IT COULD RESULT IN A BRICKED DEVICE.
=====================================================
S-OFF Users
Step 6. Enter bootloader one last time.
Step 5. Relock Bootloader (Instructions above)
Step 7. Type this command
Code:
[B]fastboot oem writesecureflag 3[/B]
Step 8. Reboot
Remember this will delete all your current data/apps so use Titanium Backup on the Play Market to back up all your downloaded content. Use this only if your going to unlock/root you device again because you need to be root access to use it.
Click to expand...
Click to collapse
Congratulation you are not back to 100% stock.
If you find any errors, message me and i will change them as quick as i can.
Helpers
Reaper24- taught me RUU process.
Wloftus- Linux fastboot command
WikdNoob- S-On command
If this helped you in any way don't forget to hit "Thanks".
Nice write up. This will be helpful with all the new faces around here.
Sent from my PG86100 using Tapatalk
Yeah. Lets hope it gets put as a sticky.
Sent from my PG86100 using xda premium
Sticky
Thx for share
godZson
XDA-MOD
Lol Nice man.. Glad you got it all sorted outo
Quicker way to open a CMD to ADB is go to your platform tools folder and hold shift down right click on it.. Say open CMD .. Your set..
Another way ...
Turn debug on ^^)
1. ADB reboot bootloader
2. Fastboot boot recovery.img for Hboot 1.5 users
3. Wipe like normal.
4. Go back to Hboot. Select fastboot
5. Now type in ^ Fastboot oem lock^
6. Now run that 2.17 RUU. DO NOT TAKE USB CORD OUT IN THE MIDDLE OF THIS WILL BRICK
7. Your set
If you wanna unroot again pretty simple..
Just redo that unlock code part your set.
Anyways if anyone needs help PM me or the OP.. I have done this 100 times or more lol well it feels like it..
yes, i'm a n00b
Just a silly question, the unroot/relock option... that should work for all EVO3D models?
Looking to return to stock (but with another RUU of course), can I follow these steps? (I'm HTCDEV unlocked)
KrewsialNL said:
Just a silly question, the unroot/relock option... that should work for all EVO3D models?
Looking to return to stock (but with another RUU of course), can I follow these steps? (I'm HTCDEV unlocked)
Click to expand...
Click to collapse
Yes it should.
Sent from my PG86100 using xda premium
this says back to stock 2.17 but mine came with 2.08 rom stock, i did the htc unlock method, rooted and now im running a 2.17 (zd3 rom)
i would like to update the radio and all, would this give me that?
then just unlock and flash rom again?
metalmenance said:
this says back to stock 2.17 but mine came with 2.08 rom stock, i did the htc unlock method, rooted and now im running a 2.17 (zd3 rom)
i would like to update the radio and all, would this give me that?
then just unlock and flash rom again?
Click to expand...
Click to collapse
Yes it will work. Know that it will also update your hboot.
Sent from my PG86100 using xda premium
ok just making sure, i am already on 1.50 so will still work right?
just lock, load stock RUU then unlock and flash?
will i need to do the htcunlock again or just unlock like posted above?
thanks and sorry just dont want to miss a step and be lost lol
metalmenance said:
ok just making sure, i am already on 1.50 so will still work right?
just lock, load stock RUU then unlock and flash?
will i need to do the htcunlock again or just unlock like posted above?
thanks and sorry just don't want to miss a step and be lost lol
Click to expand...
Click to collapse
Yes this will still work.
This only shows how to get back to stock.
I only show how to lock. But yes once your back to stock use the htc unlock method. You might have to get the Unlock_code.bin again.
ok got the Ruu its on card, followed steps, im relocked but hot do i run the ruu?
is it supposed to be renamed?
what am i missing?
metalmenance said:
anyone have another link? cant get through to download for nothing.....
Click to expand...
Click to collapse
Mirrors don't work either?
ok nevermind had the file and forgot it was on pc
anyway got it done ran the RUU on pc all went good
am running stock again now
i went back into fastboot and tried to relock but its not working
if i type ^Fastboot oem unlock^ it just says more?
do i have to do htc unlock or can it be done through this
metalmenance said:
ok nevermind had the file and forgot it was on pc
anyway got it done ran the RUU on pc all went good
am running stock again now
i went back into fastboot and tried to relock but its not working
if i type ^Fastboot oem unlock^ it just says more?
do i have to do htc unlock or can it be done through this
Click to expand...
Click to collapse
Htc unlock.
Follow this guide.
Its faster and you already have the rootevo3dnew file.
http://bit.ly/osKlF1
ok ran the htcunlock and did have to get new bin file but all is good and
up and running now off to flashing again lol
thanks for the help, it is a great write up and very usefull
thanks again
metalmenance said:
ok just making sure, i am already on 1.50 so will still work right?
just lock, load stock RUU then unlock and flash?
will i need to do the htcunlock again or just unlock like posted above?
thanks and sorry just dont want to miss a step and be lost lol
Click to expand...
Click to collapse
You just unlock again flash recovery and via fastboot boot recovery then wipe flash rom
Sent from my PG86100 using xda premium
um
Your device should reboot.
Don't let it reboot
Click to expand...
Click to collapse
that was a little confusing
i got this:
(bootloader) Lock successfully...
(bootloader) TZ_HTC_SVC_DISABLE ret = 6697713
FAILED (status read failed (Too many links))
phone says **** RELOCKED **** at top
is this correct?
SayWhat10 said:
um
that was a little confusing
i got this:
(bootloader) Lock successfully...
(bootloader) TZ_HTC_SVC_DISABLE ret = 6697713
FAILED (status read failed (Too many links))
phone says **** RELOCKED **** at top
is this correct?
Click to expand...
Click to collapse
Perfectly normal. and i understand. i will fix that.
EDIT: remove post
I just recently obtained s-off yet again on my replacement rezound. I was on the gb firmware, after getting s-off i went ahead and ruu'd to the leaked ics, renamed it to PH98whatever and flashed it, and ever since then.. i can run my phone. but i can't get recovery to work, i just get the stock recovery, the green arrow, than the red ! ... Can anyone help me out? i've flashed amon ra many times (3.15) and it won't work >.< Thanks in advance.
How did you flash the recovery?
Sent from my ADR6425LVW using Tapatalk 2
Fergusonfox7 said:
I just recently obtained s-off yet again on my replacement rezound. I was on the gb firmware, after getting s-off i went ahead and ruu'd to the leaked ics, renamed it to PH98whatever and flashed it, and ever since then.. i can run my phone. but i can't get recovery to work, i just get the stock recovery, the green arrow, than the red ! ... Can anyone help me out? i've flashed amon ra many times (3.15) and it won't work >.< Thanks in advance.
Click to expand...
Click to collapse
While in bootloader perform a factory reset. Then reboot phone. Now, you should be able to boot into recovery .
superchilpil said:
How did you flash the recovery?
Sent from my ADR6425LVW using Tapatalk 2
Click to expand...
Click to collapse
Through hboot
mjh68 said:
While in bootloader perform a factory reset. Then reboot phone. Now, you should be able to boot into recovery .
Click to expand...
Click to collapse
Doing that now.
Didn't work.... >.<
Fergusonfox7 said:
Didn't work.... >.<
Click to expand...
Click to collapse
So you flashed the recovery in fastboot ? Didn't do a ph98img and leave it on the card ? Otherwise no idea everyone had that happen with the leak , but it was fixed by performing a factory reset in bootloader. Sorry , out of ideas.
Did you unlock or install the modified hboot? I don't think the standard hboot will allow fastboot commands without unlocking it
Sent from my ADR6425LVW using Tapatalk 2
pwned3 said:
Did you unlock or install the modified hboot? I don't think the standard hboot will allow fastboot commands without unlocking it
Sent from my ADR6425LVW using Tapatalk 2
Click to expand...
Click to collapse
Nope, i went from their modded hboot with the gb firmwire, how would i go about modding the ics one?
When you ran the ruu it replaced their hboot with the stock one. Look in the s-off thread for the juopunutbear hboot. It has the download for it and instructions. But be careful. Bad things can happen messing with hboot. I would recommend just unlocking again but it's up to you. If you do unlock I don't think there's a way for it to say locked again without turning s_on and running the s-off again
Sent from my ADR6425LVW using Tapatalk 2
pwned3 said:
When you ran the ruu it replaced their hboot with the stock one. Look in the s-off thread for the juopunutbear hboot. It has the download for it and instructions. But be careful. Bad things can happen messing with hboot. I would recommend just unlocking again but it's up to you. If you do unlock I don't think there's a way for it to say locked again without turning s_on and running the s-off again
Sent from my ADR6425LVW using Tapatalk 2
Click to expand...
Click to collapse
Thanks, im pretty sure i got it, Download the controlbear from the s-off tool and get the hboot, but... can anyone tell me the command to run? its like fastboot flash jhboot.img or something..
"fastboot oem rebootRUU
fastboot flash zip jb_hboot.zip
fastboot reboot"
Got it, thanks much for the help
you cannot use fastboot flash or fastboot boot with a stock,locked,hboot.
the download is an appropriate PH98IMG file. you can put on sd card,boot to hboot,say yes to update or:
put zip into folder with adb/fastboot
boot to fastboot
open cmd window
fastboot devices
fastboot oem rebootRUU
fastboot flash zip <zipname>.zip
fastboot reboot-bootloader
verify the hboot changed
fastboot reboot
after you have the eng hboot,you can use fastboot flash to install the recovery if you want. you can also install the recovery exactly like above
to fastboot flash:
take image out of download,put inside folder with adb/fastboot utilities
boot to fastboot
open cmd window
fastboot devices
fastboot flash recovery <recoveryname>.img
fastboot reboot
note that the <zipname> and <recoveryname> must be exactly the same as what the image or zip inside your adb/fastboot folder is called.
Hi, did a stupid thing and did the OTA update without reading the forum. The first update went through but after the 2nd big update, my phone is stuck at the white HTC screen. My phone is HTCdev unlocked and was on stock GB. My hboot version is
Unlocked
Vigor PUT Ship S-On RL
Hboot 2.11.0000
eMMC-boot
Oct 6 2011
I've looked through the forums for a solution and so far I taken the following steps
1) I have tried to reflash through the hboot using rezound_AndroidPolice_3.14.605.12_PH98IMG.zip, but it won't reflash. It goes through the loading processing but at the end I don't get the do you want to update promt. It just brings me back to the fastboot, recovery, factory reset etc menu
2) Then tried reflash to stock GB (http://forum.xda-developers.com/showthread.php?t=1812084), that update worked I think since after the loading screen, it asked if I wanted to update and I clicked yes. But after that, still stuck at the white HTC screen
3) Did factory reset twice, once through hboot and then another time at the Recovery mode, still doesn't work
So now I'm completely lost in how to get my phone back to working state again. Any advice??
Thanks in advance.
Is your bootloader still unlocked? You can't take a stock rom with an unlocked bootloader. You have to relock it first.
If you can get to Fastboot, run "fastboot oem lock"
shrike1978 said:
Is your bootloader still unlocked? You can't take a stock rom with an unlocked bootloader. You have to relock it first.
If you can get to Fastboot, run "fastboot oem lock"
Click to expand...
Click to collapse
I've seen reference to "Fastboo" and running command prompt, but I have no idea how that process works. Can you explain or provide links in how to do this?
Thanks
merfolk17 said:
I've seen reference to "Fastboo" and running command prompt, but I have no idea how that process works. Can you explain or provide links in how to do this?
Thanks
Click to expand...
Click to collapse
Download fast boot files press right click select run command over here then follow the command mentioned above
Make sure u have the stock recovery before relocking ur boot loader
Sent from my HTC One X using xda app-developers app
hasibzaman said:
Download fast boot files press right click select run command over here then follow the command mentioned above
Make sure u have the stock recovery before relocking ur boot loader
Sent from my HTC One X using xda app-developers app
Click to expand...
Click to collapse
I have the Andriod SDK installed, so can you clarify what exactly do I right click and also how can I check if I do have the stock recovery flashed?
I've figured out how to use fastboot, but when I connect by phone to my computer and run the lock command, it says its waiting for the device to connect. Any suggestions?
it means your PC did not recognise the phone in fastboot. install htc drivers (through HTC sync), connect phone to PC, reboot to bootloader and select fastboot. you can see it changes to fastboot usb
I'm on the same boat, but my phone was completely stock when I took the OTA.
I used this link to unlock my phone. You can use it as reference to relock it
http://www.theandroidsoul.com/how-to-unlock-htc-one-x-bootloader/
Hope this can help you, Cheers.
I have a Rezound rooted and S-off. If I want to return completly to stock can I get S-on with this device?
tjamscad said:
I have a Rezound rooted and S-off. If I want to return completly to stock can I get S-on with this device?
Click to expand...
Click to collapse
yes you can. here is how to get s-on.
adb devices
adb reboot bootloader
fastboot devices
fastboot oem writesecureflag 3
fastboot reboot-bootloader
*verify you are locked s-on
fastboot reboot
(you will need to load a non engineering hboot before doing the steps above.)
synisterwolf said:
(you will need to load a non engineering hboot before doing the steps above.)
Click to expand...
Click to collapse
Yep, and as such, I highly recommend running the 3.14.605.12 RUU before doing those steps.
Also MAKE sure your not on an eng. Hboot when you turn s-on it would brick your phone.
sent from my s-off reZound rockin' viperRez Rom on global ICS firmware
synisterwolf said:
yes you can. here is how to get s-on.
adb devices
adb reboot bootloader
fastboot devices
fastboot oem writesecureflag 3
fastboot reboot-bootloader
*verify you are locked s-on
fastboot reboot
(you will need to load a non engineering hboot before doing the steps above.)
Click to expand...
Click to collapse
load a non engineering hboot? I'm not faliluar "non engineering hboot".
An engineering hboot allows extended fastboot commands while locked...you can only run them when you're s-off. Just flash the OTA RUU before you run those commands and you'll be fine. That will get everything back to stock, hboot included.
shrike1978 said:
Yep, and as such, I highly recommend running the 3.14.605.12 RUU before doing those steps.
Click to expand...
Click to collapse
shrike1978 said:
An engineering hboot allows extended fastboot commands while locked...you can only run them when you're s-off. Just flash the OTA RUU before you run those commands and you'll be fine. That will get everything back to stock, hboot included.
Click to expand...
Click to collapse
tjamscad said:
load a non engineering hboot? I'm not faliluar "non engineering hboot".
Click to expand...
Click to collapse
easiest way to get the non engineering hboot its to ruu. that way you can minimized the risk of bricking when going back to s-on.
what you should do is this:
back up your rom.
back up your internal sd card.
flash ruu -3.14.605.12-
do the steps for s-on
check to make sure you are s-on
then you will be at 100% factory out of the box phone.
*** please make sure you are at 80% or higher on battery life and have some free time. this might take up to an hour to do successfully. ***
shrike1978 said:
Yep, and as such, I highly recommend running the 3.14.605.12 RUU before doing those steps.
Click to expand...
Click to collapse
Why that RUU?
That's the one he suggested personally. Any fully stock ruu should be fine. Someone correct me if I'm wrong.
Sent from my ADR6425LVW using xda app-developers app
tjamscad said:
Why that RUU?
Click to expand...
Click to collapse
famouscollin said:
That's the one he suggested personally. Any fully stock ruu should be fine. Someone correct me if I'm wrong.
Sent from my ADR6425LVW using xda app-developers app
Click to expand...
Click to collapse
The only reason I suggested that particular one is that it is the current OTA. Flash it, and you'll be at the "official" versions on your hboot and radios.
shrike1978 said:
The only reason I suggested that particular one is that it is the current OTA. Flash it, and you'll be at the "official" versions on your hboot and radios.
Click to expand...
Click to collapse
Great thanks, This is what I got from this thread. Correct?
1. Flash latest RUU for Rezound
2. *ADB required*
a. adb devices
b. adb reboot bootloader
c. fastboot devices
d. fastboot oem writesecureflag 3
e. fastboot reboot-bootloader
f. fastboot reboot (verify you are locked s-on)
Correct. Good luck
Sent from my ADR6425LVW using xda app-developers app
tjamscad said:
Great thanks, This is what I got from this thread. Correct?
1. Flash latest RUU for Rezound
2. *ADB required*
a. adb devices
b. adb reboot bootloader
c. fastboot devices
d. fastboot oem writesecureflag 3
e. fastboot reboot-bootloader
f. fastboot reboot (verify you are locked s-on)
Click to expand...
Click to collapse
This did loaded RUU and turned S-on but did not unlock. Tried this fastboot oem lock and that says "RELOCKED" not the same. It was worth a shot I guess.
While trying to reroot and get s-off I have managed to get things all jacked up. I am now S-on, Unlocked and Tampered. Is there a way out of this?
Anybody?
tjamscad said:
Anybody?
Click to expand...
Click to collapse
the ruu should have given you a stock locked hboot. try running it again with a locked/relocked bootloader..
famouscollin said:
the ruu should have given you a stock locked hboot. try running it again with a locked/relocked bootloader..
Click to expand...
Click to collapse
Thanks, this has not been going like planned. I think it is wunning out of space to give me warnings.
http://www.androidpolice.com/2012/0...ull-ruu-build-4-03-605-2-for-the-htc-rezound/ name this to ph98img and flash in hboot. Your phone won't boot with the security warning. You have to run ruu.. this should help. It's the latest
Sent from my ADR6425LVW using xda app-developers app
famouscollin said:
http://www.androidpolice.com/2012/0...ull-ruu-build-4-03-605-2-for-the-htc-rezound/ name this to ph98img and flash in hboot. Your phone won't boot with the security warning. You have to run ruu.. this should help. It's the latest
Sent from my ADR6425LVW using xda app-developers app
Click to expand...
Click to collapse
can i use that to get s-off?
tjamscad said:
can i use that to get s-off?
Click to expand...
Click to collapse
Yes. You'll have to unlock, flash recovery (amonRa personally), flash supersu in recovery. Use the .5 ICS version of control bear
Sent from my ADR6425LVW using xda app-developers app
famouscollin said:
Yes. You'll have to unlock, flash recovery (amonRa personally), flash supersu in recovery. Use the .5 ICS version of control bear
Sent from my ADR6425LVW using xda app-developers app
Click to expand...
Click to collapse
Sent you a Gtalk, this is not working out for me
Pardon for the rather noobish question, I am s-off, usb debugging disabled, and the latest firmware, 2.10 but i would like to flash the custom firewater hboot
but I keep getting via terminal: error: cannot load 'hboot_firewater_jewel_4.13.651.3.zip': Unknown error
i followed all the steps then this..
Any advice... I would like to learn thank you..
Indianvixen9 said:
Pardon for the rather noobish question, I am s-off, usb debugging disabled, and the latest firmware, 2.10 but i would like to flash the custom firewater hboot
but I keep getting via terminal: error: cannot load 'hboot_firewater_jewel_4.13.651.3.zip': Unknown error
i followed all the steps then this..
Any advice... I would like to learn thank you..
Click to expand...
Click to collapse
Take out the file inside the zip. Place it on the root of the SD card and so the command again. But then again I don't think you can change the HBoot via terminal when the ROM is booted. Unless you're doing it from Linux terminal on PC?[emoji782]
Sent from my EVO using Tapatalk
Indianvixen9 said:
Pardon for the rather noobish question, I am s-off, usb debugging disabled, and the latest firmware, 2.10 but i would like to flash the custom firewater hboot
but I keep getting via terminal: error: cannot load 'hboot_firewater_jewel_4.13.651.3.zip': Unknown error
i followed all the steps then this..
Any advice... I would like to learn thank you..
Click to expand...
Click to collapse
Put the hboot.zip in the folder you are using to open your cmd window then type(while booted to fastbootusb)...pressing enter after each command
Code:
fastboot erase cache
fastboot oem rebootRUU
fastboot flash zip hboot_firewater_jewel_4.13.651.3.zip
fastboot reboot-bootloader
I believe you can also rename the file PJ75IMG.zip and apply it the same way you would a firmware update.
Sent from my EVO LTE
FinZ28 said:
I believe you can also rename the file PJ75IMG.zip and apply it the same way you would a firmware update.
Sent from my EVO LTE
Click to expand...
Click to collapse
Confirmed, this method works. I just did it. Thanks Fin!
Sent from my EVO using XDA Premium 4 mobile app