Hi everyone, I was trying to flash eugene373's Froyo Rom that does not brick and after I followed all his directions and started the Odin process. Odin got stuck at cache.rfs part. I have tried everything that I found on XDA to be helpful but still nothing, I'm still stuck at Download mode.
Here are some of the things I tried:
1)Reinstalling Samsung drivers
2)Went to safe mode in Windows 7 to make sure driver signing was ignored
3)Tried fixing the phone by installing JAC's Stock 2.1 ..
Sometimes the Odin process gets passed the cache.rfs part and gets stuck at factoryfs.rfs
I have been trying to fix the phone for about 6 hours now, still no luck.. Please help me fix this or tell me if it's bricked. Thank you in advance.
read the got any ideas thread a couple guys above you, I gave him tips there just like the others did
hi
i flashed my galaxy s2 with only PIT file by odin
after that my phone turned off
and now i can't turn it on or get into download mode or anything
I've tried SOFT & HARD reset and nothing helped
can you guys please help me .
mad921 said:
hi
i flashed my galaxy s2 with only PIT file by odin
after that my phone turned off
and now i can't turn it on or get into download mode or anything
I've tried SOFT & HARD reset and nothing helped
can you guys please help me .
Click to expand...
Click to collapse
You've bricked your device. Congratulations.
Only option is to get a JTAG repair or replace motherboard.
Why on earth did you partition your device? You have probably used a incompatible PIT file. Maybe next time you will be more careful or research things properley before attempting to do this kind of thing.
i dunno what is it with people and pit files. whenever i see a pit file i go like "hell no".
that's maybe because i've read a couple of threads like this.
from sii xda-ded
ok, my wifes s3 kept freezing about 8 times a day. so i rooted it, which went fine. then i decided to put android revolution on it, at the same time i downloaded android revolution for my galaxy nexus. i put the galaxy nexus version on her phone by mistake, although it still installed and booted fine. when we woke up the next morning it had rebooted and was stuck on the boot logo. i tried to recover the phone using odin but it says there is no pit file found.
i have downloaded the relevent pit files, but odin keeps getting stuck on get pit for mapping.
could someone please help me with this, any useful comments would be appreciated.
Service centre job .
Or search the exact same posts regarding PIT files .
Via Google .
https://www.google.co.uk/search?q=S...38,d.bGE&fp=938c58edee3526d8&biw=1280&bih=796
jje
could anyone point me to a hot to guide on manually re partitioning the pit via cmd?
my samsung galaxy s3 device was in 4.1.1 fm and rooted with clockmode:good:. everything was alright till after i had hanged up a call of my friend and my phone turned out black.. i removed the battery and then tried to reboot it and it still stocking in boot screen if Gt-i9300. then i tried to enter recovery mode and didn"t worked. but my phone can be in restore mode, I used Oden to manually flash my fm which is I9300XXEMB1_I9300AUTEMA1_I9300XXEMB1_HOME.tar and it say either there is no PIT file or nmda and it failed. i downloaded PIT file which i found from the net named GT-I9300_mx_20120220.pit which is for 16gb and tried with odin it says wait pit for maping and stuck on that.. i tried another method talking abt how to unbricke my device with VRALEC.bootchain.tar.md5 and VRBLK3_Bootchain.tar.md5 with odin and it says FAIL ,,, my device can only enter restore mode only,,, i tried method using of CWM6023TouchVZW.tar.md5 in odin and is the only way that make response to my phone and the screen has blue line appeared when i had load the CWM6023TouchVZW.tar.md5 with odin, and i waited for 1 hour and my phone still with the same thing. :crying::crying:
please developers help me how can I tackle out this problem to be fixed..
i am really depressed and don"t know what to do to fix my device which is completely bricked now and only can enter to restore mode only and when i plug the charger no led light and my screen with battery only but always loading..
i am looking forward for your help
skycasaway said:
my samsung galaxy s3 device was in 4.1.1 fm and rooted with clockmode:good:. everything was alright till after i had hanged up a call of my friend and my phone turned out black.. i removed the battery and then tried to reboot it and it still stocking in boot screen if Gt-i9300. then i tried to enter recovery mode and didn"t worked. but my phone can be in restore mode, I used Oden to manually flash my fm which is I9300XXEMB1_I9300AUTEMA1_I9300XXEMB1_HOME.tar and it say either there is no PIT file or nmda and it failed. i downloaded PIT file which i found from the net named GT-I9300_mx_20120220.pit which is for 16gb and tried with odin it says wait pit for maping and stuck on that.. i tried another method talking abt how to unbricke my device with VRALEC.bootchain.tar.md5 and VRBLK3_Bootchain.tar.md5 with odin and it says FAIL ,,, my device can only enter restore mode only,,, i tried method using of CWM6023TouchVZW.tar.md5 in odin and is the only way that make response to my phone and the screen has blue line appeared when i had load the CWM6023TouchVZW.tar.md5 with odin, and i waited for 1 hour and my phone still with the same thing. :crying::crying:
please developers help me how can I tackle out this problem to be fixed..
i am really depressed and don"t know what to do to fix my device which is completely bricked now and only can enter to restore mode only and when i plug the charger no led light and my screen with battery only but always loading..
i am looking forward for your help
Click to expand...
Click to collapse
Seems like a sudden death issue.take it to the service center.they'll replace the board.
Sent from my GT-I9300 using xda premium
Its either SDS or user bricked .
Service centre is your only option left .
jje
yes it's SDS
JJEgan said:
Its either SDS or user bricked .
Service centre is your only option left .
jje
Click to expand...
Click to collapse
Thank's mate, i think it's SDS! Do you know any fix to this problem!? please help me:crying::crying:
skycasaway said:
Thank's mate, i think it's SDS! Do you know any fix to this problem!? please help me:crying::crying:
Click to expand...
Click to collapse
as said before: service centre
skycasaway said:
my samsung galaxy s3 device was in 4.1.1 fm and rooted with clockmode:good:. everything was alright till after i had hanged up a call of my friend and my phone turned out black.. i removed the battery and then tried to reboot it and it still stocking in boot screen if Gt-i9300. then i tried to enter recovery mode and didn"t worked. but my phone can be in restore mode, I used Oden to manually flash my fm which is I9300XXEMB1_I9300AUTEMA1_I9300XXEMB1_HOME.tar and it say either there is no PIT file or nmda and it failed. i downloaded PIT file which i found from the net named GT-I9300_mx_20120220.pit which is for 16gb and tried with odin it says wait pit for maping and stuck on that.. i tried another method talking abt how to unbricke my device with VRALEC.bootchain.tar.md5 and VRBLK3_Bootchain.tar.md5 with odin and it says FAIL ,,, my device can only enter restore mode only,,, i tried method using of CWM6023TouchVZW.tar.md5 in odin and is the only way that make response to my phone and the screen has blue line appeared when i had load the CWM6023TouchVZW.tar.md5 with odin, and i waited for 1 hour and my phone still with the same thing. :crying::crying:
please developers help me how can I tackle out this problem to be fixed..
i am really depressed and don"t know what to do to fix my device which is completely bricked now and only can enter to restore mode only and when i plug the charger no led light and my screen with battery only but always loading..
i am looking forward for your help
Click to expand...
Click to collapse
The thing is you flashed a version not meant for your GT I9300. You flashed the Verizon bootchain. Verizon GSIII is Samsung SCH-i535.
Different hardware than a i9300 (Qualcomm Snapdragon MSM8260A Dual core CPU, and the i9300 has a Samsung Exynos 4412 Quadcore). Sorry bro. If you still have download mode, you can try flash a i9300 bootloader. If not. you're dead.
Hi There Developers .. Forgive Me If I Posted In Wrong Section.
I Have Infuse 4G AT&T and I Got Bored Of Its System .. So I Decided To Change It Into Jellybean.
I've Rooted My Device Successfully Using SuperOneClick .
The Second Step I Wanted To Flash CWM 6 .. And Suddenly The Electricity Is Out.
And My Phone Stuck At This Error
The Error Is Like Black screen and Mobile .. Triangle.. Computer
And I Can't Log Into Recovery Mode Or Even Download Mode .
But Odin 3.4 Read It As # COM# .
I tried to flash CWM Again But It Takes Too Long and In Odin's Logs
The Last Log Was :> Setup Connection.
Please Guys Help Me please
Thanks You All..