Just askin...
You need something done?
Well, basically I can't use 2.3.4. roms... still can't figure out why everything functions except people being able to hear me on calls. So i'm just trying to find a rom I can use and it seems it'll have to be a 2.3.3. based rom. Tried about 5 different 2.3.4. roms, even stock deodexed and still.. people can't hear me on calls but can hear me fine on 2.3.3. It seems im the only person online with this issue lol. Crazy part is, when I have the phone hooked up to the car speakers I can be heard on calls just fine but not through the speaker phone or regular phone speaker. It's pretty much dumbfounded me.
Did you update your firmware?
What you mean? I never take updates... is there a process to it that im missing somewhere? I figure there HAS to be somethin i'm doing wrong. Asides from just flashing a 2.3.4 rom from 2.3.3 what am I missing?
Wtf??? Ive never heard of this issue. I would test but my phone is disconnected. Try to run a ruu and then reroot.
Temari x Shikamaru
this is for the sprint cdma version of the evo 3d...
Go to this thread and download the "all firmware minus hboot"
http://forum.xda-developers.com/showthread.php?t=1223979
Rename the zip PG86IMG (.zip) will be the extension (full file will be named PG86IMG.zip), put the file on the root of your sd card, and boot into bootloader. When asked if you want to update, choose yes and let it do its thing. Do not pull battery or turn of your phone as that could brick your phone.
Same ol routine...flashed the virus rom and called a voice prompt line to see if itd pick up on my voice and nothing. Don't know what it is. It's not the speaker because voice commands still work but cant be heard during calls unless i plug into to bluetooth or my car sync.
Did you follow my instructions from above?
Yep... I had already done that before though. Ive been flashing a longggggggg time and ive never come across anything like this before.
brownhornet said:
Yep... I had already done that before though. Ive been flashing a longggggggg time and ive never come across anything like this before.
Click to expand...
Click to collapse
Yea, that's extremely peculiar...did you adjust anything with qpst at all?
Nope not at all. Went back to 2.3.3. and call volume is back again lol. I even tried the stock rom 2.3.4. and even it wouldn't work.
Go to a sprint repair store and ask for another phone. Tell them it has reboot locks for about 30 mins at a time.
Temari x Shikamaru
On the official 2.3.4 do u lose sound? If so inroot go back to s on take the ota and return it to sprint cause there sole.t ota u didn't wa.t ****ed up your phone.
Sent from my PG86100 using Tapatalk
mikedavis120 said:
On the official 2.3.4 do u lose sound? If so inroot go back to s on take the ota and return it to sprint cause there sole.t ota u didn't wa.t ****ed up your phone.
Sent from my PG86100 using Tapatalk
Click to expand...
Click to collapse
Nope sounds work fine...its not even my phone anymore i sold it to someone. But my mistake was selling it to someone I know.
Related
God I just need to vent......
My ear phone speaker was blown so I cleared everything, reverted to stock with hboot 1.4 and s-on and took it to the store and asked them to fix the ear piece for me.
While he was entering data he asked if everything else was ok with the phone. I said ya it was pretty sweet, then slipped and told him it sometimes it was kinda buggy and froze some but no worries really.
He looks at me and says oh I'll take a look at it for you. Of course noticing there was an update he told me about it. I told him I'm not one for updates... if it isn't broke don't fix it right?
He looks at me and says "I see, well we will see if this solves your problem and updates to 2.08"
8(
Now I have a phone with a new ear speaker and hboot 1.5
Cheers.
tl;dr sprint tech updated my phone to 2.08 after I told him not too
Take that **** back and say you didn't want the update.
knowledge561 said:
Take that **** back and say you didn't want the update.
Click to expand...
Click to collapse
... and then get terminated by sprint because of their ****ty customer service
like a bau5
are you still S-off? I guess u can flash stock RUU to retain ur old hboot.
You shouldve slapped him
brownhornet said:
You shouldve slapped him
Click to expand...
Click to collapse
I laughed. This made my day.
That sounds like a sprint rep, when I bought my 3d the guy was activating it on my account and then said oh there's an update available let me get that for you, even after I specifically told him DO NOT UPDATE THIS PHONE. He just did it anyway like an ass.
Shoot_This said:
God I just need to vent......
My ear phone speaker was blown so I cleared everything, reverted to stock with hboot 1.4 and s-on and took it to the store and asked them to fix the ear piece for me.
Click to expand...
Click to collapse
can you please let me know how to revert back to stock and s-on? I have to take my phone to repair as well but don't knpw how to turn back to stock.
cheers!
brownhornet said:
You shouldve slapped him
Click to expand...
Click to collapse
http://www.youtube.com/watch?v=qPr-xsQvhgw
Never revert to stock for hardware issues. I pay every month for insurance, they will fix the phone. Most say that my phone is awesome & can I root theirs
justj said:
can you please let me know how to revert back to stock and s-on? I have to take my phone to repair as well but don't knpw how to turn back to stock.
cheers!
Click to expand...
Click to collapse
Download the PG86IMG RUU you will find in the development section
put it on sdcard
boot into bootloader
flash update
type 'oem writesecureflag 3' into a terminal to give s-on
just leave it stock unrooted with s-off.
then they can update all they want and you have a way back.
hell just flash the latest hboot so they have nothing to blame it on.
dowmace said:
That sounds like a sprint rep, when I bought my 3d the guy was activating it on my account and then said oh there's an update available let me get that for you, even after I specifically told him DO NOT UPDATE THIS PHONE. He just did it anyway like an ass.
Click to expand...
Click to collapse
That sucks man, for the OP and you. When I got mine the update thing came up and I told the rep to not update it, he said "ok no problem, just know that updates sometimes fix things" but hit cancel right away anyway.
I guess it depends who you get you know? =\ If I was in your shoes though, I would have just asked for a new one right there since you were just buying it.
same thing happened to me. it sucks
boost happy said:
Never revert to stock for hardware issues. I pay every month for insurance, they will fix the phone. Most say that my phone is awesome & can I root theirs
Click to expand...
Click to collapse
This is so absolutely true. It makes me physically cringe when I see people clamoring to unroot their phones because they have to make a visit to Sprint.
They.Just.Don't.Care.
EVERY time I've gone in, I've gone in Rooted, and EVERY time, i've not only gotten exactly the same service I should expect, but usually, end up getting into a conversation with a rep about some new feature that Ive gotten, usually ending up providing dropbox links for apks, advice, etc.
<<bringing it since 2010>>
I am not sure if this will work every time, but when I was in, I left the SD Card in my pocket. When they returned it they mentioned that they were going to update for me but since there wasn't a card in it they couldn't. I have to take out back in. I think it needs to be replaced so hopefully I can get lucky again.
Sent from the Delta Quadrant using XDA Premium App
Yeah, if it's hardware related, what does rooting have to do with that? lol
I have never walked into a Sprint Store in my life with reverted phone software. They take it like it is or I raise hell.
Most, if not all software issues can be resolved by simple trial and error, searching the forums, or a bit of know-how.
Hardware issues are the ONLY reason why one from XDA should ever visit a Sprint Store for phone assistance.
In a case like this, it might be a good idea to temproot and remove the security certs...the phone will download the update, but the actual installation will fail
When I bought my 3d launch day, I told the rep not to even open the box, that I would set it up and if I had problems come back.
With my OG evo I had the speaker replaced twice, both times, fully rooted with cyanogenmod. Told him I tried on stock rom and speaker was still distorted. Both times, replaced with no problem.
As mentioned before, they don't care so long as they have common sense. If it is an obvious hardware issue don't sweat it.
<-- Sprint Lead Tech
Ok I'm a lead tech at an S&R location in TX. I root every phone I get and encourage my customers to do the same (if they seem capable). While Sprint discourages rooting phones, they eliminated the prior rule about not working on rooted devices a while ago. The only thing techs won't be able to assess is software, unless they're like me and love seeing rooted devices. That being said, any and all hardware issues are to be fixed as stated by Sprint Service and Repair policy. Best thing is to just be honest and let the tech know what's going on and why you don't want anything updated. I'll keep working on pushing phone unlocking from the inside, you guys keep making progress in development.
Let me know if you guys need anything.
Everyone else may not find this to be an interesting problem, but I do.
I have a rooted HBOOT 1.40 HTC Evo 3d that I got when the phone was released. I use the original TWRP that was out when the phone achieved perm-root. I've utilized multiple ROMs including: Synergy, CM7, MIUI, Eternity, and a few others. I have been using MIUI for a good two months or so until this recent issue.
Onto the issue, when someone calls me I can sometimes hear them and talk to them. So sometime when I am called my phone actually works as a phone. Other times, the other person's line keeps ringing and ringing. This happens when I call someone as well. When I call my voicemail [1 then call], I get nothing. When I go into the diag everything seems correct. I'm not super-down with all that side of things, but it seems right. I've tried placing a call long enough just in case it's an error 16 for calling [texting is fully operational].
I've NANDed back to a Sense Rom [Warm TwoPointThree] and updated my PRL, Firmware, etc as much as possible and still no dice.
So does anyone have anyway they could help me? Right about now I'm thinking unrooting is the best option. Any advice would be much appreciated. Thanks!
Not sure if it will work but you can try updating profile then prl in settings. If that doesn't work you can try a data restore. Also if you aren't on the most current radios probably wouldn't hurt to flash that either. Just tossing ideas out there for you.
N if none of that works ask Sprint to reset it n tell them what's going on might be on their end as well
Sent from my PC36100 using xda premium
ckoadiyn said:
N if none of that works ask Sprint to reset it n tell them what's going on might be on their end as well
Sent from my PC36100 using xda premium
Click to expand...
Click to collapse
Well I'm setting up ADB right now to flash the newest radio. Unroot here shortly. And if all else fails I'll call sprint. And if still not a no-go, looks like I might just use that upgrade on my other line for a new phone. Might hold out for an ICS or something and downgrade to a *eek*feature phone*eek*. Meh.
i had something similar to this a few months back. it was actually due to sprints towers having some issues. it was happening to my 3d and my wifes og evo, but not to the shift on our account. it was weird. but i would totally call sprint and see whats up sounds like its them.
pstevep said:
i had something similar to this a few months back. it was actually due to sprints towers having some issues. it was happening to my 3d and my wifes og evo, but not to the shift on our account. it was weird. but i would totally call sprint and see whats up sounds like its them.
Click to expand...
Click to collapse
That's what I had said originally. Hmm. Ok. Thanks for the input.
EDIT
I meant thought. :\
UPDATE:
The issue was Google Voice integration. The app itself didn't do it, if it had then it would've been fixed in the unroot process. It is nice knowing I can unroot, but this scare was .
Thanks for all the help guys.
Verizon is sending out replacement phone and need to restore this to stock.
This also started prior to flashing the new ICS leak and after dling ~600mb's via wireless tether.
Not sure if something burned up.
Phone is stuck on 1X only. Tried everything and can't get 3g or reliable 4g.
It get's 4G but only a minute at a time.
I tried doing the various "Fix network bootloop 1x issue threads" but still a no go.
Phone doesn't take the CDMA only option under Mobile networks, it resets back to to lte/cdma.
It never drops to 3g.
I dled the RUU but it does not update nor recover.
Any ideas?
Thanks!
Flash the stock Rom from scrosler's website.
www.scottsroms.com
Droidel said:
Verizon is sending out replacement phone and need to restore this to stock.
This also started prior to flashing the new ICS leak and after dling ~600mb's via wireless tether.
Not sure if something burned up.
Phone is stuck on 1X only. Tried everything and can't get 3g or reliable 4g.
It get's 4G but only a minute at a time.
I tried doing the various "Fix network bootloop 1x issue threads" but still a no go.
Phone doesn't take the CDMA only option under Mobile networks, it resets back to to lte/cdma.
It never drops to 3g.
I dled the RUU but it does not update nor recover.
Any ideas?
Thanks!
Click to expand...
Click to collapse
First thing I'm thinking is you can't RUU back in your situation because the version number is higher than the old RUU. My suggestion is to ROM it, and then flash back to stock RUU, because most ROMs set the version number to 1.0.0.0, therefore all RUU's are a higher version number. Then when you go to flash it, it will recognize, read and flash.
On a side note form this, you're pretty much screwed if you're trying to go to stock from something ripped, since your bootloader will show relocked or tampered, or something other than 'locked' as it shows when completely stock out of the box. This is of course unless you never unlocked it, which means you cant change version numbers, which means you're screwed either way.
Verizon will be able to look at your bootloader and know that it isnt factory stock, so chances are, they are going to charge you for your phone. I'm just trying to be honest and upfront, since I'm kind of a realist when it comes to getting screwed by big corporations like Verizon.
Good luck getting it back to an older version though.
p.s. on the note of your signal issue... the back is on the phone, right? Did you check the contacts inside the cover?
poppajules said:
First thing I'm thinking is you can't RUU back in your situation because the version number is higher than the old RUU. My suggestion is to ROM it, and then flash back to stock RUU, because most ROMs set the version number to 1.0.0.0, therefore all RUU's are a higher version number. Then when you go to flash it, it will recognize, read and flash.
On a side note form this, you're pretty much screwed if you're trying to go to stock from something ripped, since your bootloader will show relocked or tampered, or something other than 'locked' as it shows when completely stock out of the box. This is of course unless you never unlocked it, which means you cant change version numbers, which means you're screwed either way.
Verizon will be able to look at your bootloader and know that it isnt factory stock, so chances are, they are going to charge you for your phone. I'm just trying to be honest and upfront, since I'm kind of a realist when it comes to getting screwed by big corporations like Verizon.
Good luck getting it back to an older version though.
p.s. on the note of your signal issue... the back is on the phone, right? Did you check the contacts inside the cover?
Click to expand...
Click to collapse
The contacts are fine. what if the phone bricked during a software update in hboot? Can they still see relocked and tampered?
Some say that vz doesnt care as long as it has no physical damage.
I don't know about Verizon not caring, but I highly doubt they would take back all of our rooted phones..
I doubt the phone bricked if it booted up. I would flash the ICS RUU and see if the radios fix your signal issue.
Like I said before, I am running Scott's CleamROM and it sets the software versions to 1.0.0.0, so any RUU will flash over it. This is your best bet.
If VZW doesn't care about the bootloader, then you're golden, but don't count on that.
If I may pry, why are you sending it back for the replacement? If it's because of the radios, then I really doubt they are going to just take the phone back, since you could have messed up software to cause the issue.
Just try flashing some stuff before you call it busted. I would go with the ICS leak, Scott's CleanROM, and then back to your old RUU if you want. There's also a patch you have to install to downgrade from CleanROM and ICS leak back to GB, so you might want to do research, also. If you need help finding stuff, just send me a PM.
p.s. Anyone can boot your phone to bootloader (unless of course your phone is in little tiny pieces all over the street), and see that the bootloader is unlocked, possibly tampered for the custom recovery installed, and even if you lock it again, it will say relocked, indicating to everyone that it has been unlocked at one point. 'Unlocked', 'Relocked', 'Tampered', and 'Security Warning' void certain parts of your warranty (in the words of HTC dev.com). The only thing that doesn't void it is if it reads 'Locked'. Period.
Some say that vz doesnt care as long as it has no physical damage.[/QUOTE] Dude I sent two Dinc2 back completed rooted with no problems. Most times the tech at big V. couldn't care less. Most don't wouldn't know what rooting is and the ones that do, more than likely are rooted themselves. The question is if they send it to HTC? And will it meet their requirment now that they have a record that you are rooted as I'm sure if you're had to go thru HTC to unlock. However in reading alot of cases noone have posted a problem with returning a rooted or relocked phone at lease none I've read about. Good luck tho as there's always that first time.
ghostt021 said:
Dude I sent two Dinc2 back completed rooted with no problems. Most times the tech at big V. couldn't care less. Most don't wouldn't know what rooting is and the ones that do, more than likely are rooted themselves. The question is if they send it to HTC? And will it meet their requirment now that they have a record that you are rooted as I'm sure if you're had to go thru HTC to unlock. However in reading alot of cases noone have posted a problem with returning a rooted or relocked phone at lease none I've read about. Good luck tho as there's always that first time.
Click to expand...
Click to collapse
Yeah, I've never tried to send a rooted phone back, personally, but I've never asked anyone at VZW about it. (I'm paranoid that SWAT will descend from the roof and take me down if they knew my phone was rooted)
Good luck dude, just box it up and ship it off then. 'F' 'em.
No go, reflashed ICS leak, the tamper and security warning are gone.
I don't understand why it's not letting me switch to CDMA only. It goes back to CDMA/LTE. Could a bad SIM card cause 3g issues?
I doubt the SIM card would cause 3G issues, but hey, anything is possible I guess. I would say that you wouldn't get ANY signal if the SIM card were bad. Do you have another SIM card phone to test with, perhaps? Just an idea...
Did you go to a ROM instead of just the leak? Hell, you might just have signal issues where you are.. Maybe?
Maybe the antenna did burn up.. never heard of it, but that's not saying it can't happen.
I think tracing your steps back is going to be the best at figuring out the issue. When you flashed the ICS leak, you relocked and flashed, right? no errors? the install went straight down the list with no skipping around? After the install, you went through full HTC/Verizon setup? Have you tried the phone in other locations, i.e. work, groceiry store, gas station, interstate, etc.? Even outside the house will give a different strength... Forgive these sugestions as 'elementary' or 'duh' type suggestions, but something just doesn't sound right.
Also, go to your network settings and try changing the network type from automatic to home only. See what happens.
poppajules said:
I doubt the SIM card would cause 3G issues, but hey, anything is possible I guess. I would say that you wouldn't get ANY signal if the SIM card were bad. Do you have another SIM card phone to test with, perhaps? Just an idea...
Did you go to a ROM instead of just the leak? Hell, you might just have signal issues where you are.. Maybe?
Maybe the antenna did burn up.. never heard of it, but that's not saying it can't happen.
I think tracing your steps back is going to be the best at figuring out the issue. When you flashed the ICS leak, you relocked and flashed, right? no errors? the install went straight down the list with no skipping around? After the install, you went through full HTC/Verizon setup? Have you tried the phone in other locations, i.e. work, groceiry store, gas station, interstate, etc.? Even outside the house will give a different strength... Forgive these sugestions as 'elementary' or 'duh' type suggestions, but something just doesn't sound right.
Also, go to your network settings and try changing the network type from automatic to home only. See what happens.
Click to expand...
Click to collapse
I noticed this happeneng a day prior to flashing the ICS leak. I was using wifi tether do download about 600mb's and notice a couple of hours later that it dropped to 1x. Restarted phone and it went to 4g. I usually switch to 3g to save battery, that's when i notice the problem.
The ics leak flash didn't show any errors.
I am trying to flash GB to this new firmware but i'm having a hard time flashing the PH98IMG RUU from scott's site. It reads and checks it but doesnt flash it.
RUU.exe errored out with "Unknown Error"
Droidel said:
I am trying to flash GB to this new firmware but i'm having a hard time flashing the PH98IMG RUU from scott's site. It reads and checks it but doesnt flash it.
RUU.exe errored out with "Unknown Error"
Click to expand...
Click to collapse
Make SURE you are pulling the PH98IMG for the stock RUU from the android police website, NOT Scott. He didn't post up the new leak. The RUU that Scott has will NOT flash over the old ICS stuff he's put out before.
Go here to get the leaked RUU.
In this process, relock your bootloader, flash the file from A.P.(TWICE, this is important), unlock your bootloader with your unlock token from htcdev, and THEN flash what scott has. It's a time consuming process. It's up to you though. The directions are out there on A.P., Scott's website, all over Scott's thread around the 400-page range for the 4.0.1 release... and my abbreviated directions here.
Grab one of the top three selections, not the pre-rooted version.
also, try going back and re-downloading your ROM file, maybe you got a bad download.
If you upgraded to ics, you can't ruu to gingerbread at all because of the older hboot. But you can flash a gb kernel then a Rom or nandroid+ scrosler sdcard fix
Sent from my ADR6425LVW using xda premium
So, long story short, took the Phone into Sprint so they could look at my headphone jack (was cracked and left ear bud would constantly cut in and out) because its acting up.
Gave the Tech the phone without the battery in it (since he didn’t need to power up the device to clearly see the headphone jack has a huge crack in it) but I left my SD card installed. As he was walking away, I asked him if I could remove my SD card and he let me, then seen that I gave him the phone without a battery. So, I ended up giving it to him (praying he didn’t turn it on and see ViperBoys sick ass ROM booting up) and he accidently pressed the power button turning the phone on. Promptly short after, he removed the battery when the phone was on the HTC screen, didn’t even get the boot animation. I was like OHH $h!t, that gonna mess up my phone & sure as $h!t, it did… Just loops in and out of that screen resetting each time with a little vibrate then looping.
I can get into Fastboot and use ADB, I’ve flashed RUU’s, put Stock image on root of SD and let recovery restore (losing my CWM & my HBOOT 1.400), unlocked, relocked, wiped, thrown, and screamed at it with no luck.
I did do a CWM backup before even setting foot in the Store, so I do have a backup. The 1st thing I tried was restoring it through CWM recovery and that didn’t stop the looping. I can still get into fastboot via power + vol down and adb functionality is still there.
HBOOT is 1.50 and s-on is enabled..
Been reading through threads since lunch and tried many different solutions without success. It seems once a phone is this far gone, people stop responding.
Anyone have any ideas?
New phone will be here tomorrow (free of coarse courtesy of Sprint insurance) but I’ve been without a phone all day and most of yesterday. I’d like to get this one back to stock and booting before I trade it in for the replacement tomorrow
So you ran an RUU and it still didnt work? And you're sure the RUU SUCCESSFULLY ran without any parts of it failing right?
If that's true, there's no hope AFAIK. Try to get it not to show the bootanimation by bricking it further.
yousefak said:
So you ran an RUU and it still didnt work? And you're sure the RUU SUCCESSFULLY ran without any parts of it failing right?
If that's true, there's no hope AFAIK. Try to get it not to show the bootanimation by bricking it further.
Click to expand...
Click to collapse
Yup, RUU ran though fine and finished without error. Thing has been rooted since Revolutionary came out with the 1st rooting scheme for the 3D.. Flashed tons of ROM's never had this problem.
lessegr said:
Yup, RUU ran though fine and finished without error. Thing has been rooted since Revolutionary came out with the 1st rooting scheme for the 3D.. Flashed tons of ROM's never had this problem.
Click to expand...
Click to collapse
My only explanation is that while he removed the battery some of your hardware got borked. This can't possibly be a software issue.
yousefak said:
My only explanation is that while he removed the battery some of your hardware got borked. This can't possibly be a software issue.
Click to expand...
Click to collapse
BUMMER! In case the question comes up I ran "RUU_Shooter_S_Sprint_WWE_2.17.651.5_Radio_1.06.00.1216_NV_NV_spcs_1.42_release_233304_signed" and it ran just fine.
Hmm, hardware issue. Dont see how I can check for that if it doesnt boot.
Guess I'll just have to wait for the new Phone
try to fastboot oem lock it from fastboot. Then RUU, see if that works.
Why even get this one to work if you are getting a replacement?
Sprint is just going to put the phone back to stock....
jdeoxys said:
try to fastboot oem lock it from fastboot. Then RUU, see if that works.
Click to expand...
Click to collapse
The HTC unlock went as expected. Followed the directions to the "T", then relocked, checked in fastboot (not that I could check anywhere else, LOL) and the phone says "*** RELOCKED***". Ran 2.17.651.5 RUU successfully to the finish. Still looping
WEIRD!
DarkManX4lf said:
Why even get this one to work if you are getting a replacement?
Sprint is just going to put the phone back to stock....
Click to expand...
Click to collapse
Because I just want to know WTF happened!!! Had this Phone since release, abused\used the hell out of it by flashing ROMs constantly, restoring backups, tethering like crazy, emailing, texting, FBing...
No reason for it to crap out on me from a simple mistake, not even of my responsibility, lol!
The only issue I've had with this Phone is that damn headphone jack 1/2 way failing..
Got new phone, terrified to even think about trying to flash new ROM though
lessegr said:
Got new phone, terrified to even think about trying to flash new ROM though
Click to expand...
Click to collapse
LULZ
Same problem with me happened.. Except I had hboot 1.5 and I went one month or two without rooting because I was scared to brick it. I ended up rooting it with desperation and I found my one true love ZR3D rom.
BEAUTIFUL, FAST, plus 4.0 skins ;D. Do it man
Sent from my PG86100 using XDA
Threevo said:
LULZ
Same problem with me happened.. Except I had hboot 1.5 and I went one month or two without rooting because I was scared to brick it. I ended up rooting it with desperation and I found my one true love ZR3D rom.
BEAUTIFUL, FAST, plus 4.0 skins ;D. Do it man
Sent from my PG86100 using XDA
Click to expand...
Click to collapse
DONT TEMPT ME DAMMIT! lol! Just been without a phone for almost 3 days. I'm also seeing a lot of new threads about people experiencing what I've gone through.
Woops, sprint\HTC! once again rooted, and running viperROM.... SWWWWWET!
HBOOT 1.5 and s-on is a *****!
Not to mention... But in Linux, I never got revo recovery to flash... You can do it in windows just do it via fastboot.
Took my Orig cwm bsckup "recovery" & "boot" .img and threw them @ the phone via command prompt.
After cwm was restored, I restored my 4\29\2012 backup that I made before I entered the Sprint store, now my phone is back to the exact same way
It was. Pretty Damn sweet!
So much info here!! I'm truly thankful!!!
Sent from my PG86100 using xda premium
Ok I have a few questions for the flashers out there. I have a EVO design from boost. I have successfully flashed my EVO 3d to boost butthere is a problem. It seems like if I do not use my phone any calls will go straight to voicemail. I have verified that it doesn't do this with the design. I'm at my wits end on this. I.have tried everything from being stock non rooted to New Roms , switching my cid, and this has been on 2 phones, 2 doferent donor phones. I'm just mot sire how to goto the next step. My donor phones are off with battery out of them. I need to know if anybody else has had this issue and if so how did I fix it..if u did.
gmzombie said:
Ok I have a few questions for the flashers out there. I have a EVO design from boost. I have successfully flashed my EVO 3d to boost butthere is a problem. It seems like if I do not use my phone any calls will go straight to voicemail. I have verified that it doesn't do this with the design. I'm at my wits end on this. I.have tried everything from being stock non rooted to New Roms , switching my cid, and this has been on 2 phones, 2 doferent donor phones. I'm just mot sire how to goto the next step. My donor phones are off with battery out of them. I need to know if anybody else has had this issue and if so how did I fix it..if u did.
Click to expand...
Click to collapse
Try making a call on the phone. it it gives you an error 16 you gotta call boost so they can fix it. Also, did you change the MIN and MSID?
i dont have a problem there the phone works fine when i use it as it has been activated for a little bit now. its when i let it sit idle for about an hour or so and it will send all my calls to voicemail even though i have good signal.
gmzombie said:
i dont have a problem there the phone works fine when i use it as it has been activated for a little bit now. its when i let it sit idle for about an hour or so and it will send all my calls to voicemail even though i have good signal.
Click to expand...
Click to collapse
You would have to call boost mobile so they can do something about it since they allow flashed phones and they would be cool with it.
Sent from my PG86100 using xda app-developers app
Yea they may allow flashed phones but they will not.support them im sure. I dont think that calling them will help on thespecially especally sin e the donor evo design works great
Also i have been testing this flash on a samsung gs2 epic touch and all seems well as of now. Been using it since i bootlooped my 3d last night. Nothing major kust need to re rom it. But this wouldean that the 3d is at fault somehow. If someone has flashed the 3d can u givee some direction if u have had this issue.
I'm testing using an older radio and pri to see if that is the problem. I feel like the pri could be an issue after reading it does the work for the voice and data for the phone connecting to the network. Although my pri still says 1.43.003 I think some other people said if u flash an older one it will be there just not show in the pri. Any ideas or advice
Yes I have some advice. You cannot ask for help on changing your msid or esn number on xda. It is illegal and xda doesn't engage in "illegal" activities. You'll have to google your answers on your own. I am simply repeating what mods have said in the past. If have questions about that you can ask them in the ask a mod thread. Not being a douche. Just telling you what's been said.
Let me ask u a question. Where in the hell do u see anything about asking how to flash or change the esn or meid in my post..nowhere because there is nothing in any of my posts asking how to change my esn or meid. I already know how to do this and what I was asking was about the pri and if anyone else was having a problem like I was.
Now I'm testing the virgin mobile pri since on a prepaid. I figured what do I have to lose. So far it lasted over the hour mark. Let's see how the night goes for it.
Ok so that didn't work. I'm going to ruu back to 2.08.651.1 to get the pri back to 1.24.003 then I will flash meanrom ics. Blah a lot of crap just to test older pri. Just wish I could get this fixed once and for all.
Evo 3d to Boost error 16
after i flashed my evo 3d i got an error 16. So what i should do? Call boost? And what i should say, so they will not suspend my account