[Q] Question to boost mobie carrier flasherst - HTC EVO 3D

Ok I have a few questions for the flashers out there. I have a EVO design from boost. I have successfully flashed my EVO 3d to boost butthere is a problem. It seems like if I do not use my phone any calls will go straight to voicemail. I have verified that it doesn't do this with the design. I'm at my wits end on this. I.have tried everything from being stock non rooted to New Roms , switching my cid, and this has been on 2 phones, 2 doferent donor phones. I'm just mot sire how to goto the next step. My donor phones are off with battery out of them. I need to know if anybody else has had this issue and if so how did I fix it..if u did.

gmzombie said:
Ok I have a few questions for the flashers out there. I have a EVO design from boost. I have successfully flashed my EVO 3d to boost butthere is a problem. It seems like if I do not use my phone any calls will go straight to voicemail. I have verified that it doesn't do this with the design. I'm at my wits end on this. I.have tried everything from being stock non rooted to New Roms , switching my cid, and this has been on 2 phones, 2 doferent donor phones. I'm just mot sire how to goto the next step. My donor phones are off with battery out of them. I need to know if anybody else has had this issue and if so how did I fix it..if u did.
Click to expand...
Click to collapse
Try making a call on the phone. it it gives you an error 16 you gotta call boost so they can fix it. Also, did you change the MIN and MSID?

i dont have a problem there the phone works fine when i use it as it has been activated for a little bit now. its when i let it sit idle for about an hour or so and it will send all my calls to voicemail even though i have good signal.

gmzombie said:
i dont have a problem there the phone works fine when i use it as it has been activated for a little bit now. its when i let it sit idle for about an hour or so and it will send all my calls to voicemail even though i have good signal.
Click to expand...
Click to collapse
You would have to call boost mobile so they can do something about it since they allow flashed phones and they would be cool with it.
Sent from my PG86100 using xda app-developers app

Yea they may allow flashed phones but they will not.support them im sure. I dont think that calling them will help on thespecially especally sin e the donor evo design works great

Also i have been testing this flash on a samsung gs2 epic touch and all seems well as of now. Been using it since i bootlooped my 3d last night. Nothing major kust need to re rom it. But this wouldean that the 3d is at fault somehow. If someone has flashed the 3d can u givee some direction if u have had this issue.

I'm testing using an older radio and pri to see if that is the problem. I feel like the pri could be an issue after reading it does the work for the voice and data for the phone connecting to the network. Although my pri still says 1.43.003 I think some other people said if u flash an older one it will be there just not show in the pri. Any ideas or advice

Yes I have some advice. You cannot ask for help on changing your msid or esn number on xda. It is illegal and xda doesn't engage in "illegal" activities. You'll have to google your answers on your own. I am simply repeating what mods have said in the past. If have questions about that you can ask them in the ask a mod thread. Not being a douche. Just telling you what's been said.

Let me ask u a question. Where in the hell do u see anything about asking how to flash or change the esn or meid in my post..nowhere because there is nothing in any of my posts asking how to change my esn or meid. I already know how to do this and what I was asking was about the pri and if anyone else was having a problem like I was.

Now I'm testing the virgin mobile pri since on a prepaid. I figured what do I have to lose. So far it lasted over the hour mark. Let's see how the night goes for it.

Ok so that didn't work. I'm going to ruu back to 2.08.651.1 to get the pri back to 1.24.003 then I will flash meanrom ics. Blah a lot of crap just to test older pri. Just wish I could get this fixed once and for all.

Evo 3d to Boost error 16
after i flashed my evo 3d i got an error 16. So what i should do? Call boost? And what i should say, so they will not suspend my account

Related

Interesting Problem

Everyone else may not find this to be an interesting problem, but I do.
I have a rooted HBOOT 1.40 HTC Evo 3d that I got when the phone was released. I use the original TWRP that was out when the phone achieved perm-root. I've utilized multiple ROMs including: Synergy, CM7, MIUI, Eternity, and a few others. I have been using MIUI for a good two months or so until this recent issue.
Onto the issue, when someone calls me I can sometimes hear them and talk to them. So sometime when I am called my phone actually works as a phone. Other times, the other person's line keeps ringing and ringing. This happens when I call someone as well. When I call my voicemail [1 then call], I get nothing. When I go into the diag everything seems correct. I'm not super-down with all that side of things, but it seems right. I've tried placing a call long enough just in case it's an error 16 for calling [texting is fully operational].
I've NANDed back to a Sense Rom [Warm TwoPointThree] and updated my PRL, Firmware, etc as much as possible and still no dice.
So does anyone have anyway they could help me? Right about now I'm thinking unrooting is the best option. Any advice would be much appreciated. Thanks!
Not sure if it will work but you can try updating profile then prl in settings. If that doesn't work you can try a data restore. Also if you aren't on the most current radios probably wouldn't hurt to flash that either. Just tossing ideas out there for you.
N if none of that works ask Sprint to reset it n tell them what's going on might be on their end as well
Sent from my PC36100 using xda premium
ckoadiyn said:
N if none of that works ask Sprint to reset it n tell them what's going on might be on their end as well
Sent from my PC36100 using xda premium
Click to expand...
Click to collapse
Well I'm setting up ADB right now to flash the newest radio. Unroot here shortly. And if all else fails I'll call sprint. And if still not a no-go, looks like I might just use that upgrade on my other line for a new phone. Might hold out for an ICS or something and downgrade to a *eek*feature phone*eek*. Meh.
i had something similar to this a few months back. it was actually due to sprints towers having some issues. it was happening to my 3d and my wifes og evo, but not to the shift on our account. it was weird. but i would totally call sprint and see whats up sounds like its them.
pstevep said:
i had something similar to this a few months back. it was actually due to sprints towers having some issues. it was happening to my 3d and my wifes og evo, but not to the shift on our account. it was weird. but i would totally call sprint and see whats up sounds like its them.
Click to expand...
Click to collapse
That's what I had said originally. Hmm. Ok. Thanks for the input.
EDIT
I meant thought. :\
UPDATE:
The issue was Google Voice integration. The app itself didn't do it, if it had then it would've been fixed in the unroot process. It is nice knowing I can unroot, but this scare was .
Thanks for all the help guys.

[Q] signal different after flashing to stock?

Ok so I rooted this bad-boy I used the HTC unlock method, upon selection of my ROM audibly was miui I wiped and flashed but I did not flash in fastboot. I flashed in recovery and it actually took, problem is I noticed my signal had reduced to 1x speed. Upon flashing to a sense ROM which is cleanrom3.0 I used it to update prl and profile but didn't help stayed the same. So I called Sprint they tried to work some magic to no avail. I then took it upon myself to go complete stock and rid root. Once the ruu flashed and I booted, I noticed I had 3g I checked prl version number and it was the same as before I went to stock. So i didn't get to happy I still wanted more research info for the cause. I then did a speed test and oh god was it slow. Download was 0.02mb/sec upload was 0.70mb/sec strange that upload was faster. But now I would like help to see what I should do next, Sprint tried to say it was hardware. Remember my phone is brand new just died insurance claim. I was thinking flashing a now ROM but thus time make sure I do it in fastboot first. Advice would be nice?
Sent from my PG86100 using xda premium
robdeezle said:
Ok so I rooted this bad-boy I used the HTC unlock method, upon selection of my ROM audibly was miui I wiped and flashed but I did not flash in fastboot. I flashed in recovery and it actually took, problem is I noticed my signal had reduced to 1x speed. Upon flashing to a sense ROM which is cleanrom3.0 I used it to update prl and profile but didn't help stayed the same. So I called Sprint they tried to work some magic to no avail. I then took it upon myself to go complete stock and rid root. Once the ruu flashed and I booted, I noticed I had 3g I checked prl version number and it was the same as before I went to stock. So i didn't get to happy I still wanted more research info for the cause. I then did a speed test and oh god was it slow. Download was 0.02mb/sec upload was 0.70mb/sec strange that upload was faster. But now I would like help to see what I should do next, Sprint tried to say it was hardware. Remember my phone is brand new just died insurance claim. I was thinking flashing a now ROM but thus time make sure I do it in fastboot first. Advice would be nice?
Sent from my PG86100 using xda premium
Click to expand...
Click to collapse
I know if your stock sometimes you can get a lemon I had a brand new evo 3d on launch day and the radio part of the phone went bad data sucked and at times wouldn't work... I wasn't rooted.. That was in a week of using the phone....
Another thing is if you know you msl and some of the program codes you could do that reactivate your phone hands free thing it might help you...
I did it back on the EVO back in the day.....
If I remember it was something along the lines of that ##data## edit msl and somewhere in that you could do a reset...
Do this at your own risk tho.... The worst thing that would happen is your phone might not reactivate and you would have to do it again online sprints site...
Yeah sounds about right with the lemon thing, other things are going wrong now that I'm stock. I did the mos thing once before with sprint actually three times before. When I first got it and later when it started tweaking.
Sent from my PG86100 using xda premium

[Q] Erased my Data Profile?

Hey, everyone. Let me first tell you how much I love this forum. <3 I browse it every damn day of my life It's my favorite.
But on to the question...
I bought an Evo 3D that was flashed to Boost Mobile before I bought it...
I bought it and got it working with my own account on Boost Mobile.
Everything was working fine except I couldn't pay my bill for a few months.
Boost Mobile sent me an e-mail saying they gave me a month of service for free.
I went to turn my phone on. It wouldn't connect to the towers or anything.
I thought it was because of all of the ROM flashing that I was doing... I reflashed
back to a Sense ROM to see if it worked or not. I'm not sure wtf was up with my
head. Maybe I was getting a bit impatient... Usually I don't do dumb **** like this
but...
I went into '##data#' in my Sense ROM, went to 'Edit Mode' and deleted my
entire 'Data Profile' on it. Now, I know my phone's connecting to the towers.
I have (what I think is) the correct IPs to get Boost Mobile service as well as
my '[email protected]'... Can anyone give me a step-by-step
to getting my phone working again?
Unfortunately, I don't have the Incognito that the flasher used to flash my
phone. I bought the phone already on Boost Mobile... But I could get the MEID/ESN
that was flashed onto my Evo 3D by going into CDMA Workshop... But I was only
reading, not writing. I'm not sure if that'll help or not... But yeah.
Is this fixable? Please tell me it is...
I'd like to use Boost Mobile in the future and I love my phone dearly.
Thanks a lot XDA! <3
mongem true.
hey im having sort of the same problem...did you ever find a solution? if you did could you help me out a bit

Problems after updating my HTC Evo 3D

I hate to just come here and ask for help, but I haven't found any solution over the past two weeks, and I didn't see any similar threads in this forum.
I have an HTC Evo 3D through Sprint. Two and a half weeks ago I downloaded the update. The update appears to have worked in the sense that the layout and many features are tweaked a little. However, since I updated it, whenever I turn it on it turns itself off and then back on every few minutes. The reason for this is that I am in Australia so it can't connect to the network to complete the update. I have been here for nearly two months, and won't be back in the US until mid-November. I have solely been using my phone with WiFi for email, internet, etc, and I would like to be able to use it for this purpose again. I called Sprint but they weren't able to help me because there is no Sprint service or Sprint stores in Australia.
Does anyone know of a way to fix the phone? If I factory reset it, will it come back without this issue, or will I just have a phone that doesn't work and lost its memory? Would there be a way to fix it by rooting it?
All help is appreciated. I'm not very knowledgeable on this kind of stuff, I apologize.
Thank you, have a great day.
Even in Airplane mode it does this?
Can't you install the latest sprint ics ruu? That should sort it. I'm gsm though so I never browse the cdma section but I think that should solve your issue.
Best of luck getting it working
Sent from my HTC EVO 3D X515m using Tapatalk 2
oohaylima said:
Even in Airplane mode it does this?
Click to expand...
Click to collapse
I have had it in airplane mode the entire time for the last 8 weeks.
00mpollard said:
Can't you install the latest sprint ics ruu? That should sort it. I'm gsm though so I never browse the cdma section but I think that should solve your issue.
Best of luck getting it working
Sent from my HTC EVO 3D X515m using Tapatalk 2
Click to expand...
Click to collapse
I'm sorry but I'm not sure what this all means. Are you suggesting that I root the phone using the newest Android version (ICS=Ice Cream Sandwich)? I have no clue how I would do this, or if it would actually solve my problem.
Ernie_Richardson said:
I'm sorry but I'm not sure what this all means. Are you suggesting that I root the phone using the newest Android version (ICS=Ice Cream Sandwich)? I have no clue how I would do this, or if it would actually solve my problem.
Click to expand...
Click to collapse
Here's a post with download links and some information about running the Sprint ICS 2.89 RUU. You didn't say if you are S-ON unlocked or S-OFF and the procedure is slightly different between those two states. If you have never HTC unlocked your phone and rooted your can just run the RUU.exe as if you were S-OFF.
ramjet73
I wonder if there is any way you can get an active Airave to connect to? Sprint obviously wouldn't issue you one in Aus, but perhaps you could have a friend or family get one, activate it, then send it to you in Aus.
Wait....are you saying as long as I have an Airave, I can get service all over the world?
oohaylima said:
Wait....are you saying as long as I have an Airave, I can get service all over the world?
Click to expand...
Click to collapse
Well, not sure. It does require GPS signal, so it may detect anything not in the US and refuse to work. It was just a thought. Anyone else try to use an Airave outside the US?
It sounds like you aren't rooted and haven't done anything outside of the normal update for the phone.
When you say that the it turns off and back on, do you mean that the phone is simply rebooting randomly? If so, then I think a custom rom might help you.
I don't think the factory reset will fix this for you btw. I also wouldn't try it unless I got a really good backup (which is pretty easy once rooted).
Thanks everyone for your help. I ended up doing an RUU flash using the info ramjet73 gave, and it appears to be working fine except that I lost all of my memory. I couldn't get it backed up before I did it, but I'd rather have a working phone without my old contacts and stuff than have it not work.
Log on to your google account and download them again.
Glad it's working. Be safe out there! Or try to be.
oohaylima said:
Log on to your google account and download them again.
Glad it's working. Be safe out there! Or try to be.
Click to expand...
Click to collapse
How do I do that?

[Q] question about flashing for frawg

Hey guys I have a quick question. I've done some searching and am not sure about this. I bought a evo 3d from a friend of mine. It was a sprint phone that is now on frawg. Last week the internet and everything worked fine. I activated it under my number this week and now the internet no longer works. It just says no connection when you try anything internet related if you are not on WiFi. I called frawg and they said it was the flash coming out. Is this something I can fix myself or do I really have to pay these guys $50 to fix the flash.
Come on guys somebody's gotta know about this.I've been googling but don't really understand what I need
9tr3g said:
Come on guys somebody's gotta know about this.I've been googling but don't really understand what I need
Click to expand...
Click to collapse
Going to need more info before anyone can attempt to help. What exactly was flashed (ROM, radios, etc)? Where did the content that was flashed come from, along with a link to it. No one can help without being able to see what it is.
That being said, a flash doesn't "come out."
Your friend should be able to help you or have the info. Maybe paying the $50 to have frawg fix it would be best as it seems you aren't familiar with flashing.
It is running the stock rom 4.0.3. As far as I know the ntelos radio and prl were flashed by an employee at the ntelos store. He has tried to take it up there for me but she took a few days off this week. I know a little bit about flashing ROMs but I don't know if this is like a ROM or completely different.
So is this something I can do myself?
It is if you have the radios and prl to flash
Sent from my PG86100 using Tapatalk
Can those be found on line? Apparently the person that flashed it does not work there anymore or they just don't want to fix it. It looks like I'm stuck fixing it my self
9tr3g said:
Can those be found on line? Apparently the person that flashed it does not work there anymore or they just don't want to fix it. It looks like I'm stuck fixing it my self
Click to expand...
Click to collapse
If it worked before you activated it on your account and you didn't change the phone (flash new rom or RUU) then it isn't the phone. Like I said before, a flash doesn't "come out" like they told you. Flashing the radios over again won't fix it. To me it sounds like it's service related, and only frawg can do something about it. They need to reprovision your phone from their end. The only other thing to check is the network setting on your phone and make sure that mobile data is enabled.
No I haven't tried to flash a Rom or anything on the phone. I also do not receive voicemail notifications. I have talked to a few people at their customer service and in the store and they all say the same thing. ill try to call after work about what you said. Mobile network was enabled but it does. Not connect.

Categories

Resources