So after a ton of reading I've narrowed my Wifi issue down to if its got a password it doesn't work. Any open networks aren't an issue. Any suggestions where to look into fixing that? I've tried almost every "wifi fix" program (ex. blade's wifi fix) and nothings connected. I see it go "authenticating" and then it shuts off. Either way help would be sweet. Links and any suggestions are welcome!
Hi, is anyone has the same problem? When I'm connected at home to my Tenda router (WIFI b/g/n) after cca 30 min. my phone WIFI stops sending and recieving data, Skype is offline, etc... but WIFI in phone is stil switched on. After I switch WIFI off and back on (on my Samsung, not on my router), everything works good for a while and after cca 30 min. is situation the same. Is there in Samsung any WIFI sleep mode or something like that? Or some settings, which is not visible? Any other suggestions? Sorry for my poor English. Thanx in advance.
I'm having the same problem. But I did a factory reset and it works fine afterward.
And just few hours ago, I encountered this problem again. What did to get this error was, I pressed "on samsungapps" and it failed to update and thus results wifi connection stopping. What about you? Also my Kies air is not working.
are you guys sure you have wifi sleep policy set correctly? just to be sure, settings, wireless, wifi, menu button, advanced, wifi sleep policy to NEVER.
Yes. And also even if i manually disconnect and reconnect the wifi back. The data still doesn't come in. It is stated there as connected but no data at all.
Somehow Wifi keeps searching every few seconds, even thought it's connected.
This is bound to cost in battery life too.
I have reseted router to default settings, disabled n mode, disabled security (only mac filtering is on), disabled all unnecessary features and PROBLEM IS SOLVED !!! Thanx God Tomorrow I will experiment with router settings to know, what was causing this error ;-)
Well at least u're connected, I'm facing the same problem as the thread starter. No data flow at all. Browser showing me offline msg. I had the same problem on the 1st day with the phone after I woke up. previously playing with most of the default aps. So i'm not sure what went wrong, did a factory reset and it works fine.
Until, few hours ago, I tried my kies air which didn't work. Browser couldnt load the address given. And I thought i had an outdated kies air, so i went to click on samsungapps, which failed to update me. At that point the wifi is still working, i leave my phone for about 30 mins, and when i came back. The same problem which happened on the 1st day came back. I was hoping to find an answer here so I didnt do the factory reset it. On another note, the phone wifi works after restart, but wouldn't last.
Edit: The wifi works after i resetted my modem to default. oh well. at least that solved it.
lukecz said:
I have reseted router to default settings, disabled n mode, disabled security (only mac filtering is on), disabled all unnecessary features and PROBLEM IS SOLVED !!! Thanx God Tomorrow I will experiment with router settings to know, what was causing this error ;-)
Click to expand...
Click to collapse
Hi,
Did you find out what setting was causing the connection issue? I also have this problem with my Tenda router. I thought it might be the wireless N, but disabling that doesn't fix it. I have a wireless distribution system set up with other tenda routers so didn't want to disable all the settings to troubleshoot if i can help it!
Thanks
spen2 said:
Hi,
Did you find out what setting was causing the connection issue? I also have this problem with my Tenda router. I thought it might be the wireless N, but disabling that doesn't fix it. I have a wireless distribution system set up with other tenda routers so didn't want to disable all the settings to troubleshoot if i can help it!
Thanks
Click to expand...
Click to collapse
I have the same problem, my router is N and the conection between SGS2 and my router is bad. Any idea?
Same problem here, I'm running WZR-AGL300NH in access point connected to my Ubuntu Server. Everything else works in the house just fine but SG2 stops transmitting data after a while.
I recently upgraded to KF1 firmware (and unknowingly wiped out whole phone, being on the bleeding edge and that didn't seem to help.
I would very much appreciate all tips because this problem is very annoying!
Additional Info:
- Buffalo is running latest firmware
- Authentication WPA2-PSK
- Encryption AES
paranoidi said:
Same problem here, I'm running WZR-AGL300NH in access point connected to my Ubuntu Server. Everything else works in the house just fine but SG2 stops transmitting data after a while.
I recently upgraded to KF1 firmware (and unknowingly wiped out whole phone, being on the bleeding edge and that didn't seem to help.
I would very much appreciate all tips because this problem is very annoying!
Additional Info:
- Buffalo is running latest firmware
- Authentication WPA2-PSK
- Encryption AES
Click to expand...
Click to collapse
Same symptoms here. Cisco DDR2200. WPA2 PSK. Haven't tried fiddling with the router yet.
This seems to be a common problem. Anyone knows of a definitive fix?
Bump...I have the same problem and the issue persists even after i reset the phone
Sent from my GT-I9100 using XDA App
Glad I found this, thought it was the ROM I had flashed to the phone (which is VillainROM)
I keep losing connection from my phone via wifi like everyone else in this thread
edit: I've just assigned my phone an IP address via my routers settings and I can connect to the net again
Also when it wasn't working, I couldn't ping the phone. When I assigned the IP just now I still couldn't ping it.
When I did a tracert to it, I could get to it when the IP was assigned and when it wasn't.
I have no removed the assigned IP for the phone from the router. Wifi connection is still working after disconnecting/reconnecting wifi on the phone.
I can also now ping the phone, where as before it was getting timeouts.
Also when it wasn't working the first time when I did a tracert it was showing up as HPsomething (didn't make note of the numbers)
this time when it is working it's just showing up as the IP address when doing a tracert.
Another update:
Just checked my printer, it has an IP address manually set on it, which at one stage when the phone wasn't working for internet it had the same IP as the printer, hence when tracert'ing it I was going to the printer instead of the phone and getting the HP etc back.
When it wasn't working at that time and looking at my routers DHCP list, it had the MAC Address of the phone against the IP that the printer has....
So I've got some issues with how my own network is setup ^_^ which looks like is causing me grief.
So the issue is with DHCP? Setting a static IP fixes it? I'll have to try, but I doubt this is a problem with the network, as all my other devices use DHCP without this problem.
I have the exact same problem!!
It's really annoying.
i was having problems with wifi too.. it keeps scanning and checking, etc, signal dropping for no reason..
fixed mine..well for me it worked
backup ur phone ( i dont take responsibility if ur phone catches fire or dies or chases u around )
u need to be rooted
download FXR WiFi fix and rescue from market
and just run the app.
now my wifi signal stays constant speed and i get good speeds
alternatively try
WiFi Fixer
both of them will cause high battery usage..i think since it keeps the signal at maximum.. so only enable wireless when i need it or use juice defender or green power.
greenpower seems great. using this at the moment
I've searched the forums for a similar issue with no luck, if anyone knows of a thread with a matching problem please provide a link.
My problem is that whenever I connect to my home network via wifi, I'm able to connect/disconnect a maximum of 3 times before wifi stops working completely. On the forth try, the phone will detect the network, try to connect and instantly disconnect. The only way I've been able to get wifi working correctly again is by rebooting the router, which also restarts the '3 connection' cycle.
I'm using a Netgear DG834G v2 and currently running Wolfbreak's latest version of CM6.1.3 but I've had the same issue with every other rom, including the official SE firmware, which leads me to believe that it is a router issue and not the phone itself.
Any help/suggestions would be greatly appreciated.
In your phone, go to WiFi settings and press options button, then select "advanced", in wifi suspension politics (or something like that) select NEVER, then download and install Blade Wifi Fix from the market (i don't know what exactly does but it will prevent WiFi disconnections and it really works), and you can try using (optional) this app to connect to WiFi, if the problem still persists i would rather think it's a router issue or something ._.
CescVicious, thanks for your help. I tried both of those apps but my wifi continues to disconnect. I'm leaning towards it being a router issue more than the phone and have posted the problem on the Netgear forums.
Thanks again.
Jason
So I have my Fascinate running CM7 with the Glitch Kernel, no OC, just for the stock UV, the problem I have is that I can connect to WiFi, everything seems fine and then a few minutes later everything stops loading, as if there was no connection. turning off WiFi and turning it back on helps about 80% of the time but still an issue, the reason this is so big is that at my house we have no reception at all, Verizon sent us a Network Extender but it simply does not work on any phone and I know for a fact that my Network is fine. (We have twin N600s one routing one access point) Additionally the issue is at the local college as well. Any help? Is there an issue with CM7 or the Glitch kernel?
I am having the exact same problem. For example, market will stick at "Loading..." while on wifi but when I turn wifi off, my 3g connection will load market fine. It's so weird because I have full wifi signal and it is definitely not my router. It didn't start until I flashed the glitch kernel. Has to be something there. Maybe there is a workaround?
Im running glitch v13 and wifi works great. sometimes after a reboot ill have to toggle it off/on...
iliketrains said:
I am having the exact same problem. For example, market will stick at "Loading..." while on wifi but when I turn wifi off, my 3g connection will load market fine. It's so weird because I have full wifi signal and it is definitely not my router. It didn't start until I flashed the glitch kernel. Has to be something there. Maybe there is a workaround?
Click to expand...
Click to collapse
I had that Market problem and it disappeared when I got a new router. A full reset/wipe of router may have fixed it also. Happened on 2 CM7 phones (Droid2 and Fascinate), but not a stock 2.3 Droid2.
On my CM7 Fascinate, I usually also have to toggle wifi after reboot.
Hi all,
About a month or so ago I started to experience issues with with the Wifi and Bluetooth on my tablet.
At this stage I'm unable to switch on the Wifi or the Bluetooth. I'm only able to to use the cellular connection. When you try and enable the wifi connection is shows that it's trying to scan for a network, but it actually never switches the Wifi on. At times it actually pauses for a few seconds after selecting the Wifi option. Then at times it just doesn't do anything when trying to activate the Wifi via the quick pull down menu.
From what I have read it appears to be a hardware problem, but then I also saw comments that it might just be a software issue.
I was rooted at one stage and in my desperation I did a OTA update to the latest 5.1.1 release to see if that will help, but it did not.
When I was rooted I did a factory reset via TWRP, but that also did not work.
My device isn't under warranty anymore so RMA isn't really an option.
However I would like to check with the community if there is anyone else who had this issue and managed to get it fixed.
Is it a hardware or software problem or even a bit of both?
Would one be able to possibly replace the WIFI and Bluetooth radio in the Z2?
I normally use the Z2 for media consumption whilst at home over the wifi connection and would like to see if it can be fixed without costing an arm and a leg.
Your help or suggestion will be appreciated.