Related
Okay so I am stuck on the recovery screen. I have rebooted several times and I have ended up in the same place. I also chose wipe data/factory reset and wipe cache partition. Some one help
ya know, some steps of what you have done before hand will probably help, what rom did you have, what have you done etc etc,
So either you have sticky buttons or your gonna need to re-flash a rom, but as we dont know wether you mean recovery or cwm recovery this post is about as much help as a chocolate fire-guard in all honesty,
If you are on CWM download a connect your phone up via mounts and storage put the rom on your phone and install it via zip,
if your stock by the sounds of it something went bad...... try grabbing a rom from samfirmware and flash it via odin.
usually happens if you format system partition, if you dont have a hardware issue simply flash stock ROM using odin
I already flash stock rom but im still stuck at the android system recovery e3
Download mode and flash a stock rom . Boot it to run and let it set up .
jje
Is Kernel_I9100DXKL3.tar.md5 a stock rom sorry im noob
No its a KERNEL .
jje
Example of stock rom? GT-I9100_DXKL3_original??? sorry i need you help
If you are on CWM download a connect your phone up via mounts and storage put the rom on your phone and install it via zip,
This option is there in CWM but we cant mount it, I tried many times...
So it is always a good idea to keep your running custom ROM zip file on your SDcard undeleted, to flash on the emergency even while you are on the go...
yesturday only my son fingured my phone and got non stop FC...just flashed ROM again but bootloop, flashed again after Factory Reset...worked.
---------- Post added at 02:39 PM ---------- Previous post was at 02:32 PM ----------
min469 said:
Example of stock rom? GT-I9100_DXKL3_original??? sorry i need you help
Click to expand...
Click to collapse
jsut read the complete guide in the link in my signature "All Stock Roms & Guide How to use ODIN"
and download any then see how it looks like....
http://forum.xda-developers.com/showthread.php?t=1075278
i say you read first as you have zero knowledge.
inshort download stock firmware, flash using odin.
Im still stuck on CWM even after stock roming it.
min469 said:
Im still stuck on CWM even after stock roming it.
Click to expand...
Click to collapse
what do you mean by stock roming, and waht did you do?
I flash stock rom on my phone but still stuck on cwm, i not really sure what i did to my phone before the problem
min469 said:
I flash stock rom on my phone but still stuck on cwm, i not really sure what i did to my phone before the problem
Click to expand...
Click to collapse
which CWM???, once you successfully flash a stock rom from ODIN, then you will get only stock recovery...what happens after flashing automatically reboot to Recovery?????
Yup i got the Android system recovery e3 now, now im stuck there
more information you give more you will get help,
we cant help with least information,
Try to flash cwm or siyah in recovery. Then flash some rom and see if that helps
Sent from my GT-I9100 using XDA
I flash cwm and flash some rom but still stuck on the cwm )):
Can u upload a pic of which recovery mode your on? Your best bet is go to samfirmware download a rom for your country or what ever you want put phone in download mode, install kies on your open task manager make sure kies isnt running grab odin and flash the stock rom,
Sent from my GT-I9100 using Tapatalk 2
I am in the same situation, stuck on the CWM Android system recovery screen. My Kernel is fine, I entered it not realizing I couldn't get out because my home button hasn't worked in over a year. I've tried resetting with the power button, and the power button + down key, but it always comes back to this screen. All I need to do is select the "reboot system now" button but without a Home Key I can't select it. Any way around this?
my battery sucks so i wanna go back to froyo . i have 2.2 firmware but when install from odin the samsumg logo keeps on lopping and is doesnt start .
thanks //
[email protected] said:
my battery sucks so i wanna go back to froyo . i have 2.2 firmware but when install from odin the samsumg logo keeps on lopping and is doesnt start .
thanks //
Click to expand...
Click to collapse
There is tar ball you have to flash in Odin before switching back to froyo... It's called downgrage.tar..
I will upload it if i find it ..
EDIT : I found it!!!!!
And the link is posted
downgrade file
This is not needed anymore!! You should do all wipes from the Recovery and then flash through Odin..
{ brvsn ~ CM9 on GT-I5500 ~ Tapatalk2 }
Yep like he seid,
I just flash mine and it came up with the rom recovery before finishing the flash and i forgot the wipe it and just restarted it and it just kept looping the samsung logo,so I flashed it again and when the recovery came up again I wiped it all(cache and all) and it worked..;D
With my rom the recovery comes up sa its flashing it so it starts to copy the rom over the boots the recovery then you can wipe it then restart and then it boots the rom..
My rom is:
SAMSUNG_GALAXY_I5500XWJP4_BB_ORIGNAL_ROM_V2.2.tar.md5
If anyone wants this rom PM me for it,Its not in english you will have to change it to the one you use.
---------- Post added at 09:51 PM ---------- Previous post was at 09:29 PM ----------
I am going to make a setup exe file it will help you set it up step by step on how it flash your phone. it will have all the files you need to flash your phone too..well it will need it..
Good idea..?
HI all
My phone is stuck at boot animation.
My custom recovery is working (CWM 5.5.0.4) and i am able to flash different roms.
Even i am able to flash via odin.
But after reboot all roms are getting stuck at boot animation
I tried CM and sammy based both type of roms but same result.
BUT I FOUND ONE PROBLEM WHENEVER I TRY TO FORMAT DATA IN RECOVERY IT GIVES ERROR "ERROR MOUNTING DATA"
Please help me i even tried CM 9 but same result
quaker1985 said:
HI all
My phone is stuck at boot animation.
My custom recovery is working (CWM 5.5.0.4) and i am able to flash different roms.
Even i am able to flash via odin.
But after reboot all roms are getting stuck at boot animation
I tried CM and sammy based both type of roms but same result.
BUT I FOUND ONE PROBLEM WHENEVER I TRY TO FORMAT DATA IN RECOVERY IT GIVES ERROR "ERROR MOUNTING DATA"
Please help me i even tried CM 9 but same result
Click to expand...
Click to collapse
your cwm recovery is way too old buddy! upgrade to the latest touch cwm or philz touch recovery!
just updated to new recovery CWM 6.0.3.2 touch, still same problem
quaker1985 said:
just updated to new recovery CWM 6.0.3.2 touch, still same problem
Click to expand...
Click to collapse
did you try flashing stock firmware via odin? then factory reset?
sriram231092 said:
did you try flashing stock firmware via odin? then factory reset?
Click to expand...
Click to collapse
sorry i missed in first post but THANKS for such a quick reply.
I tried 4.2.2 leaked firmware(from sammobile) via ODIN.
If i need to flash any other stock rom PLEASE provide me link for the same
quaker1985 said:
sorry i missed in first post but THANKS for such a quick reply.
I tried 4.2.2 leaked firmware(from sammobile) via ODIN.
If i need to flash any other stock rom PLEASE provide me link for the same
Click to expand...
Click to collapse
download the latest version of 4.1.2 of your country from www.sammobile.com. flash it via odin and then factory reset from the stock recovery. you should be able to boot into rom.
OK i m downloading the firmware let me try it
OK i flash stock file with odin, but now my phone is stuck in bootloop.
During this bootloop notification light stays on all time.
quaker1985 said:
OK i flash stock file with odin, but now my phone is stuck in bootloop.
During this bootloop notification light stays on all time.
Click to expand...
Click to collapse
did you factory reset from recovery immediately after flashing?
sriram231092 said:
did you factory reset from recovery immediately after flashing?
Click to expand...
Click to collapse
THanx a million
it booted
thank you thank you
PS
Is it ok if i try another rom
because i m afraid flashing again and again will cause further problems
quaker1985 said:
no
Click to expand...
Click to collapse
then do it buddy! it is required
---------- Post added at 09:31 AM ---------- Previous post was at 09:03 AM ----------
quaker1985 said:
THanx a million
it booted
thank you thank you
PS
Is it ok if i try another rom
because i m afraid flashing again and again will cause further problems
Click to expand...
Click to collapse
you have a button to click and edit the thread title to solved.
EDIT: SOLVED
Fixed it, thanks to Zuluman!
For anyone else with this issue here's how I solved it:
Installed stock i9300 UK (BTU) 4.3 ROM using ODIN
Flashed TWRP recovery with ODIN
Downloaded Patched_XXUGMK6_kernel.zip and Patched_XXUGMK6_modem.zip:
Zuluman's Files
Installed these via. the TWRP recovery
Wiped data, cache and dalvik cache, rebooted the device and then it should connect
==============================================
Hi,
I'm aware there are a TON of threads similar to this out there but I have tried so many 'solutions' and cannot get anywhere.
I am getting the 'Emegency Calls Only' error on my Galaxy S3 i9300 after trying to use custom ROMs and even the stock ROMs. My IMEI and serial number are correct and I have also tried the ARIZA patch but I still receive the same error.
I'd be very grateful if anyone could help and also if any more info. is required, I'll post it.
Thanks.
Try to find the latest recovery for the device and get the "modem.bin" file out of the Archive and flash it using Odin using the CP or the Phone button.
Sent from my GT-I9300 using Tapatalk
Fixed it, thanks to Zuluman!
For anyone else with this issue here's how I solved it:
Installed stock i9300 UK (BTU) 4.3 ROM (can be found on sammobile) using ODIN
Flashed TWRP recovery with ODIN
Downloaded Patched_XXUGMK6_kernel.zip and Patched_XXUGMK6_modem.zip:
tinyurl.com/zuluman
Installed these via. the TWRP recovery
Wiped data, cache and dalvik cache, rebooted the device and bazinga, connected.
Hopefully this helps someone out there, my head's been spinning all weekend!
lukeg26 said:
Fixed it, thanks to Zuluman!
For anyone else with this issue here's how I solved it:
Installed stock i9300 UK (BTU) 4.3 ROM (can be found on sammobile) using ODIN
Flashed TWRP recovery with ODIN
Downloaded Patched_XXUGMK6_kernel.zip and Patched_XXUGMK6_modem.zip:
tinyurl.com/zuluman
Installed these via. the TWRP recovery
Wiped data, cache and dalvik cache, rebooted the device and bazinga, connected.
Hopefully this helps someone out there, my head's been spinning all weekend!
Click to expand...
Click to collapse
its works !!!
pankaj.jajoria said:
its works !!!
Click to expand...
Click to collapse
Good to know it's helped others Exact reason why I commented how I fixed it, because there are so many threads that say either "fixed" and give no solution, or they never reply!
it works but the phone goes modified and counter goes +2 and custom rom in download mode .
---------- Post added at 12:33 AM ---------- Previous post was at 12:30 AM ----------
is there any way to flash modem through odin with out rooting or custom recovery .
yasser86 said:
it works but the phone goes modified and counter goes +2 and custom rom in download mode .
---------- Post added at 12:33 AM ---------- Previous post was at 12:30 AM ----------
is there any way to flash modem through odin with out rooting or custom recovery .
Click to expand...
Click to collapse
Purchase Triangle Away from Google Play, reset the counter then you should get the following:
Product Name: GT-I9300
Custom Binary Download: No
Current Binary: Samsung Official
System Status: Official
However, I don't know about this method in a custom ROM since it'd be custom, not official stock.
i flash them through a custom recovery , so how i can get it official and zero count !!
Thanks for that!
Sent from my GT-I9300 using XDA Free mobile app
yasser86 said:
i flash them through a custom recovery , so how i can get it official and zero count !!
Click to expand...
Click to collapse
After flashing through a custom recovery, I think if you might be able to use Triangle Away to set the counter to zero, then extract the recovery.img (or .bin?) from the stock ROM and flash this through ODIN so you'll end up with stock ROM and stock recovery.
lukeg26 said:
EDIT: SOLVED
Fixed it, thanks to Zuluman!
For anyone else with this issue here's how I solved it:
Installed stock i9300 UK (BTU) 4.3 ROM using ODIN
Flashed TWRP recovery with ODIN
Downloaded Patched_XXUGMK6_kernel.zip and Patched_XXUGMK6_modem.zip:
Zuluman's Files
Installed these via. the TWRP recovery
Wiped data, cache and dalvik cache, rebooted the device and then it should connect
==============================================
Hi,
I'm aware there are a TON of threads similar to this out there but I have tried so many 'solutions' and cannot get anywhere.
I am getting the 'Emegency Calls Only' error on my Galaxy S3 i9300 after trying to use custom ROMs and even the stock ROMs. My IMEI and serial number are correct and I have also tried the ARIZA patch but I still receive the same error.
I'd be very grateful if anyone could help and also if any more info. is required, I'll post it.
Thanks.
Click to expand...
Click to collapse
Wow! Thanks heaps! I spent nearly 2 days trying to find a solution to this! This one definitely worked for me! Two thumbs up!!!
Thanks ALOT!!! This is the only solution that actually WORKS!!!!
Thanks You Very Much.... My network is back
this solution works, but still there is a problem with my i9300
sometimes no service, sometimes ok, sometimes imei null
did the same, didnt work
Fixed my original s3
Hey dude, thanks for this. now i have my s3 working wasn't as much of an issue but had to try this fix and it worked
this method didnt work on my 2 galaxy s3's. an other solution someone?
Tried the XXUGMK6. And I'm still getting same no service or emergency calls only, what are other versions meant for ? Like XXUFMJ9 XXEMG4
Thanks!!It Works
Awesome...Thanks Zuluman, it works!!!:good::good::good::good:
Best Solution!!
lukeg26 said:
EDIT: SOLVED
Fixed it, thanks to Zuluman!
For anyone else with this issue here's how I solved it:
Installed stock i9300 UK (BTU) 4.3 ROM using ODIN
Flashed TWRP recovery with ODIN
Downloaded Patched_XXUGMK6_kernel.zip and Patched_XXUGMK6_modem.zip:
Zuluman's Files
Installed these via. the TWRP recovery
Wiped data, cache and dalvik cache, rebooted the device and then it should connect
==============================================
Hi,
I'm aware there are a TON of threads similar to this out there but I have tried so many 'solutions' and cannot get anywhere.
I am getting the 'Emegency Calls Only' error on my Galaxy S3 i9300 after trying to use custom ROMs and even the stock ROMs. My IMEI and serial number are correct and I have also tried the ARIZA patch but I still receive the same error.
I'd be very grateful if anyone could help and also if any more info. is required, I'll post it.
Thanks.
Click to expand...
Click to collapse
Thank you for this awesome solution! I have tried many different solutions and none of them solve the problem.....
Just follow the instructions and this should definitely work.
Thanks to everyone who contributed to this solution!
thank you
it worked for me thank you
hey guys need a little help m stuck on the samsung galaxy logo
here is wat i did.
my S3 does not connect to pc no matter wat i do just keeps saying USB not recognized tries nearly everything i could but doesnt connect.
so i used kingoroot to root the phone and i installed TWRP via Terminal command.
i entered recovery
i downloaded EOL] [ROM] [5.1.1] [CyanogenMod] [GCC 4.9] [Excellent] [12/11/15] ArchiDroid V3.1.5 rom installed it all went well but wen it restarts phone doesnt go ahead of the galaxt logo
i downloaded QS-i9300-JB(ob2) rom flashed it same results
can some 1 help plz m stuck
cant even use ODIN as usb not recognozed
|=>AmuzZ<=| said:
hey guys need a little help m stuck on the samsung galaxy logo
here is wat i did.
my S3 does not connect to pc no matter wat i do just keeps saying USB not recognized tries nearly everything i could but doesnt connect.
so i used kingoroot to root the phone and i installed TWRP via Terminal command.
i entered recovery
i downloaded EOL] [ROM] [5.1.1] [CyanogenMod] [GCC 4.9] [Excellent] [12/11/15] ArchiDroid V3.1.5 rom installed it all went well but wen it restarts phone doesnt go ahead of the galaxt logo
i downloaded QS-i9300-JB(ob2) rom flashed it same results
can some 1 help plz m stuck
cant even use ODIN as usb not recognozed
Click to expand...
Click to collapse
Without more info i cannot help you unfortunately. Please provide more and i may consider helping you if its not a serious problem.
thanks for your reply.
please tell me what info u need and i will give as i wrote all i did.
cant seem to get passed the samsung galaxy logo
i had done a backup but kinda lost it is it possible to download i9300 backup from somewer so i can restore it n c if it will work.
i tried googling but cant seem to find the back up. i dont want a rom.zip jus the backup folder i place in TWRP and try
I can upload cm11 TWRP backup if you want. It is a very small package
---------- Post added at 20:03 ---------- Previous post was at 19:59 ----------
If you want, i can upload it in like 30 minutes or so
---------- Post added at 20:07 ---------- Previous post was at 20:03 ----------
Uploading cm 9 backup (12%)
---------- Post added at 20:20 ---------- Previous post was at 20:07 ----------
Backup was made using this version of TWRP https://dl.twrp.me/i9300/twrp-3.0.2-1-i9300.img.html move this file to sdcard and install it as image in TWRP. If you need help, ask me
---------- Post added at 20:44 ---------- Previous post was at 20:20 ----------
https://mega.nz/#!XFc3SRRS!xApFnA1pC0fr4gZXp0iK749eGD9NHLBvxeb4pIVt4tc there you have it If I helped, please press Thanks button
thank u very much let me try it
just tried to restore it. still same issue stuck on samsung logo
any other ideas to wat i can do to get it booting
Do you have a Linux machine? Not virtualbox, but real PC running Ubuntu. Because I've unbricked friends i9300 using Heimdall, because i didint need drivers for linux. On VM it wont work, because it's not recognized by Windows, so it cannot be attached to VM You can also try using Ubuntu Live USB or CD
yes i can get a linux not a problem mayb u can giv me how to do it..
thanks alot
Here is a Video tutorial how to use Heimdall. https://youtu.be/6TgyaUbjcm4
BTW, if You go to download mode, do you have proper Mode lNumber? And are there any mount errors in TWRP?
here is the link to to the my download mode on s3
https://www.dropbox.com/s/n01ncdyzo9jpu6k/IMAG0019.jpg?dl=0
Model reads SHV - E218S
no i don get any mount errors as u used USB OTG to transfer the files to the phone.
So, try this
1. Boot to TWRP
2. Wipe System, Data, cahce, dalvik cache, and internal storage
3. Flash back to noot rom http://arter97.com/browse/S3/ROM/back-to-n00t/back-to-n00t_ROM_V9.zip
4. Flash this kernel zip http://arter97.com/browse/S3/kernel/xda/arter97-kernel-5.0.zip
5.Reboot
Hope it works
I think, that you need specific backup of e218s. Try to look for someone who has e218s, root it, install twrp and make backup to sdcard. Insert sdcard into your device and restore it. That will definetly fix a problem. I was not able to find e218s firmware anywhere, so it might be a little bit hard. You can always send device to any phone service and they will flash the firmware for you
sorry i am a little confused now .
should i try the Heimdall methed?
should i download the rom and kernel in above and flash
or should i try looking for the 218s rom
Sorry i miss read it SHV - E210S
Ahh if You have e210s ,it will be easy, just wipe every partition in TWRP, (including sdcard) and flash this file https://s.basketbuild.com/filedl/de.../CyanogenMod/cm-11-20141122-NIGHTLY-e210s.zip along with these gapps https://www.androidfilehost.com/?fid=95832962473395379 and reboot
I jus downloaded n flased the rom and gapps still same stuck with samsung logo not booting up
|=>AmuzZ<=| said:
I jus downloaded n flased the rom and gapps still same stuck with samsung logo not booting up
Click to expand...
Click to collapse
There has to be something that was done to make it i9300, because there is a thread here that says that you can convert the e210s korean model into the i9300 international model. I can't find it, but i'll make sure to edit this post and insert the link once i've found it. But I was able to find THIS thread which is for the korean variants of the S3. Get yourself a prerooted firmware from HERE and install it.
EDIT: HERE it is the thread for converting the E210S. WAIT? How did it show i9300? It is supposed to show i9305...
EDIT2: I see. You thought it was an i9300. You screwed the device by flashing an i9300 ROM when it was supposed to be the E210S, i9305's Korean relative. Don't make the same mistake or you will really brick your device. Or it may be already screwed because you installed i9300 recovery? What recovery did you install anyways?
IT IS SO MESSED UP, PLEASE CLARIFY WHAT YOU DID AND WHAT YOU INSTALLED SO WE CAN SEE WHAT YOU DID WRONG.
thanks alot ... i installed the pre rooted rom and it came on .. il try and convert it later
thanks alot...
|=>AmuzZ<=| said:
thanks alot ... i installed the pre rooted rom and it came on .. il try and convert it later
thanks alot...
Click to expand...
Click to collapse
*cough*Thanks button*cough*. You welcome. Don't convert it to i9305 because you won't gain anything. If it works let it be. Happy to have helped.