hey guys need a little help m stuck on the samsung galaxy logo
here is wat i did.
my S3 does not connect to pc no matter wat i do just keeps saying USB not recognized tries nearly everything i could but doesnt connect.
so i used kingoroot to root the phone and i installed TWRP via Terminal command.
i entered recovery
i downloaded EOL] [ROM] [5.1.1] [CyanogenMod] [GCC 4.9] [Excellent] [12/11/15] ArchiDroid V3.1.5 rom installed it all went well but wen it restarts phone doesnt go ahead of the galaxt logo
i downloaded QS-i9300-JB(ob2) rom flashed it same results
can some 1 help plz m stuck
cant even use ODIN as usb not recognozed
|=>AmuzZ<=| said:
hey guys need a little help m stuck on the samsung galaxy logo
here is wat i did.
my S3 does not connect to pc no matter wat i do just keeps saying USB not recognized tries nearly everything i could but doesnt connect.
so i used kingoroot to root the phone and i installed TWRP via Terminal command.
i entered recovery
i downloaded EOL] [ROM] [5.1.1] [CyanogenMod] [GCC 4.9] [Excellent] [12/11/15] ArchiDroid V3.1.5 rom installed it all went well but wen it restarts phone doesnt go ahead of the galaxt logo
i downloaded QS-i9300-JB(ob2) rom flashed it same results
can some 1 help plz m stuck
cant even use ODIN as usb not recognozed
Click to expand...
Click to collapse
Without more info i cannot help you unfortunately. Please provide more and i may consider helping you if its not a serious problem.
thanks for your reply.
please tell me what info u need and i will give as i wrote all i did.
cant seem to get passed the samsung galaxy logo
i had done a backup but kinda lost it is it possible to download i9300 backup from somewer so i can restore it n c if it will work.
i tried googling but cant seem to find the back up. i dont want a rom.zip jus the backup folder i place in TWRP and try
I can upload cm11 TWRP backup if you want. It is a very small package
---------- Post added at 20:03 ---------- Previous post was at 19:59 ----------
If you want, i can upload it in like 30 minutes or so
---------- Post added at 20:07 ---------- Previous post was at 20:03 ----------
Uploading cm 9 backup (12%)
---------- Post added at 20:20 ---------- Previous post was at 20:07 ----------
Backup was made using this version of TWRP https://dl.twrp.me/i9300/twrp-3.0.2-1-i9300.img.html move this file to sdcard and install it as image in TWRP. If you need help, ask me
---------- Post added at 20:44 ---------- Previous post was at 20:20 ----------
https://mega.nz/#!XFc3SRRS!xApFnA1pC0fr4gZXp0iK749eGD9NHLBvxeb4pIVt4tc there you have it If I helped, please press Thanks button
thank u very much let me try it
just tried to restore it. still same issue stuck on samsung logo
any other ideas to wat i can do to get it booting
Do you have a Linux machine? Not virtualbox, but real PC running Ubuntu. Because I've unbricked friends i9300 using Heimdall, because i didint need drivers for linux. On VM it wont work, because it's not recognized by Windows, so it cannot be attached to VM You can also try using Ubuntu Live USB or CD
yes i can get a linux not a problem mayb u can giv me how to do it..
thanks alot
Here is a Video tutorial how to use Heimdall. https://youtu.be/6TgyaUbjcm4
BTW, if You go to download mode, do you have proper Mode lNumber? And are there any mount errors in TWRP?
here is the link to to the my download mode on s3
https://www.dropbox.com/s/n01ncdyzo9jpu6k/IMAG0019.jpg?dl=0
Model reads SHV - E218S
no i don get any mount errors as u used USB OTG to transfer the files to the phone.
So, try this
1. Boot to TWRP
2. Wipe System, Data, cahce, dalvik cache, and internal storage
3. Flash back to noot rom http://arter97.com/browse/S3/ROM/back-to-n00t/back-to-n00t_ROM_V9.zip
4. Flash this kernel zip http://arter97.com/browse/S3/kernel/xda/arter97-kernel-5.0.zip
5.Reboot
Hope it works
I think, that you need specific backup of e218s. Try to look for someone who has e218s, root it, install twrp and make backup to sdcard. Insert sdcard into your device and restore it. That will definetly fix a problem. I was not able to find e218s firmware anywhere, so it might be a little bit hard. You can always send device to any phone service and they will flash the firmware for you
sorry i am a little confused now .
should i try the Heimdall methed?
should i download the rom and kernel in above and flash
or should i try looking for the 218s rom
Sorry i miss read it SHV - E210S
Ahh if You have e210s ,it will be easy, just wipe every partition in TWRP, (including sdcard) and flash this file https://s.basketbuild.com/filedl/de.../CyanogenMod/cm-11-20141122-NIGHTLY-e210s.zip along with these gapps https://www.androidfilehost.com/?fid=95832962473395379 and reboot
I jus downloaded n flased the rom and gapps still same stuck with samsung logo not booting up
|=>AmuzZ<=| said:
I jus downloaded n flased the rom and gapps still same stuck with samsung logo not booting up
Click to expand...
Click to collapse
There has to be something that was done to make it i9300, because there is a thread here that says that you can convert the e210s korean model into the i9300 international model. I can't find it, but i'll make sure to edit this post and insert the link once i've found it. But I was able to find THIS thread which is for the korean variants of the S3. Get yourself a prerooted firmware from HERE and install it.
EDIT: HERE it is the thread for converting the E210S. WAIT? How did it show i9300? It is supposed to show i9305...
EDIT2: I see. You thought it was an i9300. You screwed the device by flashing an i9300 ROM when it was supposed to be the E210S, i9305's Korean relative. Don't make the same mistake or you will really brick your device. Or it may be already screwed because you installed i9300 recovery? What recovery did you install anyways?
IT IS SO MESSED UP, PLEASE CLARIFY WHAT YOU DID AND WHAT YOU INSTALLED SO WE CAN SEE WHAT YOU DID WRONG.
thanks alot ... i installed the pre rooted rom and it came on .. il try and convert it later
thanks alot...
|=>AmuzZ<=| said:
thanks alot ... i installed the pre rooted rom and it came on .. il try and convert it later
thanks alot...
Click to expand...
Click to collapse
*cough*Thanks button*cough*. You welcome. Don't convert it to i9305 because you won't gain anything. If it works let it be. Happy to have helped.
Related
Hi
Over the last few weeks I have tried various roms etc....however today trying the Clockwork recovery my phone has frozen at the first start up screen "Samsung Galaxy s 11 GT- I9100" I have used the tool to get the Downloading screen and tried to reinstall using Odin...... Still no luck all I get is the first start up screen, any help most appreciated !!!!
sr
Are you on stock or custom rom?
Hi
I was on TurkbeyRom Deluxe Edition V27 XWKJ3 . I installed the clockwork recovery that was included on the rom and .......you know the rest. As I said I have tried to use Odin to re install a different modem still no joy though..
steve16 said:
Hi
Over the last few weeks I have tried various roms etc....however today trying the Clockwork recovery my phone has frozen at the first start up screen "Samsung Galaxy s 11 GT- I9100" I have used the tool to get the Downloading screen and tried to reinstall using Odin...... Still no luck all I get is the first start up screen, any help most appreciated !!!!
sr
Click to expand...
Click to collapse
Stock : go in recovery mode, wipe data/factory reset and cache, reboot
Custom: go to recovery and restore a working recovery or flash a new rom and boot up
---------- Post added at 06:47 PM ---------- Previous post was at 06:44 PM ----------
steve16 said:
Hi
I was on TurkbeyRom Deluxe Edition V27 XWKJ3 . I installed the clockwork recovery that was included on the rom and .......you know the rest. As I said I have tried to use Odin to re install a different modem still no joy though..
Click to expand...
Click to collapse
Hope you made a backup, restore that in recovery. If not reflash the rom but first wipe cache and dalvik cache
Thanks..
All sorted.....Odin to the rescue as I couldn't get into recovery.
Thanks for the prompt replies though.....teach me to leave well alone !
sr
oke, you`re saved
i am not sure if i posted this in the right forum, i couldn't find my device, can anyone find or get me the stock recovery for the AT&T Huawei Fusion 2? please help
ahawkua said:
i am not sure if i posted this in the right forum, i couldn't find my device, can anyone find or get me the stock recovery for the AT&T Huawei Fusion 2? please help
Click to expand...
Click to collapse
Here is a .zip file containing a backup of the stock Huawei Fusion 2 ROM inside the .zip file is the stock recovery image. You can download the .zip file from here.
oh thank you!! so there is the rom and the stock recovery? do i just flash it through clockworkmod? will it replace clockworkmod automatically with the stock recovery or will i have to flash that too?
ahawkua said:
oh thank you!! so there is the rom and the stock recovery? do i just flash it through clockworkmod? will it replace clockworkmod automatically with the stock recovery or will i have to flash that too?
Click to expand...
Click to collapse
What you do is transfer the backup to your sdcard and then use CWMR to restore the stock backup. Restoring the stock backup should replace CWMR with the stock recovery image. For more information I would recommend taking a look at this guide here.
shimp208 said:
Here is a .zip file containing a backup of the stock Huawei Fusion 2 ROM inside the .zip file is the stock recovery image. You can download the .zip file from here.
Click to expand...
Click to collapse
I tried to download the file and I received an "Error (500)" page from DropBox. Is the link still valid?
anonchalantsigh said:
I tried to download the file and I received an "Error (500)" page from DropBox. Is the link still valid?
Click to expand...
Click to collapse
Just checked the link and it still works fine, if you need I can download it for you and upload it to my Google Drive and provide you a download link just let me know .
shimp208 said:
Just checked the link and it still works fine, if you need I can download it for you and upload it to my Google Drive and provide you a download link just let me know .
Click to expand...
Click to collapse
Just tried it again, it worked this time. Thanks a bunch!
Sent from my Nexus 7 using Spacestar Ordering
at&t stuck logo
plz help i tried flashing a custom rom but it failed and now iam stuck at the at&t logo plz helpppp
stuck at at&t logo
dude i also need help iam stuck at at&T logo as i failed to flash custom rom on u8665
---------- Post added at 06:55 PM ---------- Previous post was at 06:51 PM ----------
dude i also need help iam stuck at at&T logo as i failed to install CyanogenMod on u8665 huwei i had followed the the tutorial http://forum.xda-developers.com/showthread.php?t=2368790
but the zip part i failed and now iam stuck at the at&t logo
iam not even sure if i soft brick my phone
help is required plz help
ali761 said:
dude i also need help iam stuck at at&T logo as i failed to flash custom rom on u8665
---------- Post added at 06:55 PM ---------- Previous post was at 06:51 PM ----------
dude i also need help iam stuck at at&T logo as i failed to install CyanogenMod on u8665 huwei i had followed the the tutorial http://forum.xda-developers.com/showthread.php?t=2368790
but the zip part i failed and now iam stuck at the at&t logo
iam not even sure if i soft brick my phone
help is required plz help
Click to expand...
Click to collapse
To help me understand what went wrong, do you have Clockworkmod Recovery installed on your device and are you still able to get into recovery mode? What step out of the procedure in thread you linked to failed (Did it fail on step 1, step 2, etc.)? If you can answer these questions I can help you out some more. Also if you need to flash your device back to the stock ROM check out this thread. Let me know if you still have questions I'll be happy to help.
at&t logo stuck
dude i have cwm installed i can get into the recovery mode the volume up and power button also i failed at step 9 as i could not extract the contents and game me an error like cant mount sd card i rebotted and stuck at the at&t logo
also the contents were in the internal sd card
i am really worried and now i dnt want to install custom rom i just want it the way it should be like the original
srry for my bad english
---------- Post added at 06:36 AM ---------- Previous post was at 06:31 AM ----------
ally Posted by ali761 View Post
dude i also need help iam stuck at at&T logo as i failed to flash custom rom on u8665
---------- Post added at 06:55 PM ---------- Previous post was at 06:51 PM ----------
dude i also need help iam stuck at at&T logo as i failed to install CyanogenMod on u8665 huwei i had followed the the tutorial http://forum.xda-developers.com/show....php?t=2368790
but the zip part i failed and now iam stuck at the at&t logo
iam not even sure if i soft brick my phone
help is required plz help
To help me understand what went wrong, do you have Clockworkmod Recovery installed on your device and are you still able to get into recovery mode? What step out of the procedure in thread you linked to failed (Did it fail on step 1, step 2, etc.)? If you can answer these questions I can help you out some more. Also if you need to flash your device back to the stock ROM check out this thread. Let me know if you still have questions I'll be happy to help
dude i have cwm installed i can get into the recovery mode the volume up and power button also i failed at step 9 as i could not extract the contents and game me an error like cant mount sd card i rebotted and stuck at the at&t logo
also the contents were in the internal sd card
i am really worried and now i dnt want to install custom rom i just want it the way it should be like the original
srry for my bad english
ali761 said:
Dude i have cwm installed i can get into the recovery mode the volume up and power button also i failed at step 9 as i could not extract the contents and game me an error like cant mount sd card i rebotted and stuck at the at&t logo
also the contents were in the internal sd card
i am really worried and now i dnt want to install custom rom i just want it the way it should be like the original
srry for my bad english
Click to expand...
Click to collapse
I would recommend transferring this stock ROM to your device by booting into recovery mode, connecting your phone to your computer through USB and then using ADB (Which should be accessible in recovery mode) to push the zip to recovery mode which you can then flash. If you have any questions please feel free to continue asking as I'll be happy to answer them.
i wanted to flash cm11 on my xperia u,so i put the zip folder in my device ad went into cwm and did all the wipes,formatted system then when i flashed the rom i got status 7 error :crying: i tried fixing permissions but nothing worked,now iam stuck in sony bootlogo
even my flashtool isn't recognising my deice(i am running windows 8.1)it doesn't even connect in fastbootmode,flashmode :crying:
plz help me!
weirdovivek said:
i wanted to flash cm11 on my xperia u,so i put the zip folder in my device ad went into cwm and did all the wipes,formatted system then when i flashed the rom i got status 7 error :crying: i tried fixing permissions but nothing worked,now iam stuck in sony bootlogo
even my flashtool isn't recognising my deice(i am running windows 8.1)it doesn't even connect in fastbootmode,flashmode :crying:
plz help me!
Click to expand...
Click to collapse
And what made you try a rom in development when you don't have the means to recover from disaster which would surely happen?
Try to see if in the stiky for windows 8 drivers, and flashtool windows 8 instructions if anything works there for you.
Try
Do you use USB 3 ports? Someone have posted solution for them a while ago in the forum, search it.
If you are able to enter cwm then mount the sdcard and load the zip of the rom previously installed on your phone and flash it !
ChikeD said:
And what made you try a rom in development when you don't have the means to recover from disaster which would surely happen?
Try to see if in the stiky for windows 8 drivers, and flashtool windows 8 instructions if anything works there for you.
Try
Do you use USB 3 ports? Someone have posted solution for them a while ago in the forum, search it.
Click to expand...
Click to collapse
no i dont have USB 3 ports,but i will try the other two methods and report back
k13k said:
If you are able to enter cwm then mount the sdcard and load the zip of the rom previously installed on your phone and flash it !
Click to expand...
Click to collapse
i dont have the previous rom zip in my sd card,i didn't face any status 7 error while flashing nightly-1 so i didnt think about backing up or putting an extra rom....now suffering the consequences
weirdovivek said:
i dont have the previous rom zip in my sd card,i didn't face any status 7 error while flashing nightly-1 so i didnt think about backing up or putting an extra rom....now suffering the consequences
Click to expand...
Click to collapse
Is you cwm recovery still functioning?
If it does see if you can mount USB storage and copy rom zip to it.
Do your PC recognize the phone, even in flashmode?
Windows key + R, type devmgmt.msc, connect the phone and look if the screen turns white. If it recognized then flashtool should have it too, if not, install drivers as @chickeD said.
Sent from my Xperia Sola using xda premium
ChikeD said:
Is you cwm recovery still functioning?
If it does see if you can mount USB storage and copy rom zip to it.
Click to expand...
Click to collapse
my cwm is still working but my pc doesn't recognise when i connect phone to pc.....i've tried the above methods...still when i connect in flashmode it stays there for a while then a msg pops up saying drivers not available
thanks anyways
i can't do this anymore tried all methods.....i am going to my friend's house he has win7 so will install flashtool in his pc and flash stock firmware
Cm11 Bootloop
i flashed cm11 android 4.4 kitkat on my phone today .... even after doing all the wipes every time the phone boots after like 20 seconds of use it goes into a bootloop
i thought it was a nightly-1 error so i flashed mclaw's version but the problem still persists
does anyone know a solution for this ?
Thank You
p.s : i changed to cm 11 from MIUI v5 . is there a problem there ?
weirdovivek said:
my cwm is still working but my pc doesn't recognise when i connect phone to pc.....i've tried the above methods...still when i connect in flashmode it stays there for a while then a msg pops up saying drivers not available
Click to expand...
Click to collapse
I wasn't talking about flash mode. When in CWM go to mounts and mount USB storage at the bottom, in theory you should be able to mount it on your PC, never work for me though because I cannot find the MTP drivers or maybe my CWM is not the greatest, but I never had one that did work.
Did the disable driver signing from flashtool site didn't work either?
Also look at this post and see if that works for you.
ChikeD said:
I wasn't talking about flash mode. When in CWM go to mounts and mount USB storage at the bottom, in theory you should be able to mount it on your PC, never work for me though because I cannot find the MTP drivers or maybe my CWM is not the greatest, but I never had one that did work.
Did the disable driver signing from flashtool site didn't work either?
Also look at this post and see if that works for you.
Click to expand...
Click to collapse
dude i've tried every possible method,but nothing worked for me...and in cwm also i was not able to mount it on my pc
P.S:now i've flashed stock from my friend's pc and reverted back to cm11
flash the latest kernel,do all the wipes,format system,flash the latest nightly
androidous said:
i flashed cm11 android 4.4 kitkat on my phone today .... even after doing all the wipes every time the phone boots after like 20 seconds of use it goes into a bootloop
i thought it was a nightly-1 error so i flashed mclaw's version but the problem still persists
does anyone know a solution for this ?
Thank You
p.s : i changed to cm 11 from MIUI v5 . is there a problem there ?
Click to expand...
Click to collapse
u have to format ur system before installing cm11 but be careful..i got a status 7 error while flashing the latest nightly so i was stuck in a bootloop....put an additional rom in ur sd card(in case if anything goes wrong u can flash it) and edit the updater script so that u dont get that error
weirdovivek said:
u have to format ur system before installing cm11 but be careful..i got a status 7 error while flashing the latest nightly so i was stuck in a bootloop....put an additional rom in ur sd card(in case if anything goes wrong u can flash it) and edit the updater script so that u dont get that error
Click to expand...
Click to collapse
i did have a backup of my miui 5 but even now when i flash cm11 it still bootloops after a while .. any help ? :/
---------- Post added at 10:01 AM ---------- Previous post was at 09:55 AM ----------
weirdovivek said:
u have to format ur system before installing cm11 but be careful..i got a status 7 error while flashing the latest nightly so i was stuck in a bootloop....put an additional rom in ur sd card(in case if anything goes wrong u can flash it) and edit the updater script so that u dont get that error
Click to expand...
Click to collapse
i did have a backup of my miui 5 but even now when i flash cm11 it still bootloops after a while .. any help ? :/
maybe u should try the latest build which is out just now check cm11 thread
androidous said:
i did have a backup of my miui 5 but even now when i flash cm11 it still bootloops after a while .. any help ? :/
---------- Post added at 10:01 AM ---------- Previous post was at 09:55 AM ----------
i did have a backup of my miui 5 but even now when i flash cm11 it still bootloops after a while .. any help ? :/
Click to expand...
Click to collapse
follow the intructions for flashing the rom as suggested by op in cm11 thread and u will have no bootloops
Man, flash other ROM that it worked on your phone. I think the most important here is to get out of that bootloop so flash stock or other ROM like eXperience.
Later on you can flash CM11 from the computer.
Sent from my Xperia Sola using xda premium
Hey guys i stuck boot of my Karbonn a16.
I had rooted it and was trying to install chainfire but as it rebooted my device boot screen got stuck after.
i also tried doing factore data reset and cache reset but it didnt work.
SO CAN ANYONE PLEASE HELP ME?????
I Really would me thankful to my friend who would please help me....
PLEASE HELP
Anyone Please!!!!!!!
I just got the phone 15 days earlier only.
My advanced big thanxxx to my bro who would help me.
Please
i too had the same issue with mine because of chainfire so do u get error of Qpst or only boot loop.???
---------- Post added at 03:36 PM ---------- Previous post was at 03:31 PM ----------
If its bootloop it means you have bricked your phone but not fully
Here is the step by step guide for unbricking your Android device if it is boots but goes in to a boot loop:
1. The first step is to boot your phone into recovery.
2.Now go to WIPE while in recovery mode and clear Delvik Cache.
3.Now restart you phone and see if it stays alright or goes back into a boot loop.
4.If the phone again restarts after landing on launch screen, then power off you phone.
5.Restart your phone into recovery again and delete all data/cache. Flash a new ROM if it is already on your SD card.
6.Once this is done, reboot your phone and hopefully you will be able to get rid of the boot loop problem.
In case your phone is booting into recovery rather than normally then again repeat the steps mentioned above. In this kind of brick, you will need to re-flash a new ROM. The above method is applicable on temporary bricks only. In case your phone doesn’t boot at all after rooting or flashing custom ROM or boot image, then there is nothing you can do about it. Please check your carrier or mobile phone vendor for a replacement.
HOPE IT HELPS YOU. If not try to contact me for further help.
It takes even less time to say THANKS
but what to do if you can't get to recovery mode?
pahaloid said:
but what to do if you can't get to recovery mode?
Click to expand...
Click to collapse
If nothing not EVEN a single things starts‚mobile doesn't charge and you can't go to any mode then your mobile is fully bricked.
Sent from my A15 using XDA Premium 4 mobile app
Hey thanxx bro but so many options like deletind dalvik cache are not available in default recovery
And if u are talking about wiping cache that is available in default recovery then i have done it 14 times but still not working
But thanxxx for sharing bro
PrinceKumar said:
Hey thanxx bro but so many options like deletind dalvik cache are not available in default recovery
And if u are talking about wiping cache that is available in default recovery then i have done it 14 times but still not working
But thanxxx for sharing bro
Click to expand...
Click to collapse
TRY to install clockwork mod recovery for your android device...
But i dont have any recovery img for doing this and if there is someone then installing recovery can also brick my phone bro
if u know about recovery of karbonn a16 and method to falsh it and is good working method then please tell me i will try to install
and as u have stated that i will need my stock or any custom rom to unbrick my phone then where will i get it from???????????
well its not so bad even as i got my phone back to company for replacement only after using 15 days
but bro if u find something helping like cwm then please tell me bro as having cwm installed be suitable method and successfully flashed in phone makes u confiedent about falshing roms or rooting ur andy
Plasse tell me bro if u find
if cwm is found then i will extract the stock rom and must i need is cwm
PLEASE must reply brother if u find something good and working for my cwm
PrinceKumar said:
PLEASE must reply brother if u find something good and working for my cwm
Click to expand...
Click to collapse
Can you tell me whichh method you used for rooting your android phone???
Did you used any software???
---------- Post added at 04:00 PM ---------- Previous post was at 03:56 PM ----------
You may try the way shown in link to install custom rom but as you know i am not a perfect guy to give you an answer You have t take risk as my androuid too got same problems so you can mostly try to download tools and check one by one that it works or not but still you can go to this link
http://androidxda.com/flash-stock-rom-using-smart-phone-flash-tool
yes buddy i used a software named vroot
here is the link for software u can try this if u find it useful
http://cdnpic.mgyun.com/files/products/vRoot/2013/17235968/VRoot_1.7.0.3882_Setup.exe
and thanxx bro iw will try ur way out
PrinceKumar said:
yes buddy i used a software named vroot
here is the link for software u can try this if u find it useful
http://cdnpic.mgyun.com/files/products/vRoot/2013/17235968/VRoot_1.7.0.3882_Setup.exe
and thanxx bro iw will try ur way out
Click to expand...
Click to collapse
Hope the androidxda.com way helps you...
well u r saying right, that i must try methods one by one but actually i got my phone back to company and dont want to lose one again so i am asking u which type of method would be exact for this purpose
Same boot stuck problem
Hi, I also have the same problem and i need to flash it. But i cant find STOCK ROM FILES for my KARBONN A16
Boot stuck of karbonn a16
same problem here. I rooted my karbonn a16 and installed rom toolbox lite.
I successfully changed boot animation and tried to change font. but after a reboot my a16 phone stucked at boot screen and I cant pass through it. I tried wiping cache and factory reset but no luck. I dnt have cwm installed and I cnt find stock rom for my a16 karbonn device. plzzzzzzzzz helppppppp. this is second time my phone stucked. I got replacement first time but I was well scolded by my parents. so rhis time I dnt wnt this to happen. plzzzzzzzzzz help!!!!
thanks to any one who does it. in advance
.
Boot stuck of my android karbonn a16
PrinceKumar said:
Hey guys i stuck boot of my Karbonn a16.
I had rooted it and was trying to install chainfire but as it rebooted my device boot screen got stuck after.
i also tried doing factore data reset and cache reset but it didnt work.
SO CAN ANYONE PLEASE HELP ME?????
I Really would me thankful to my friend who would please help me....
PLEASE HELP
Click to expand...
Click to collapse
same problem here. I rooted my karbonn a16 and installed rom toolbox . I changed my boot animation and changed the font. after reboot it stuck on boot animation and I cant pass through it . I tried wiping cache and factory reset. I dnt have cwm installed. and also there are no available stock roms for my device so that I can flash it. plzzzzzzzzzzz helppppppp. thanks in advance
Stpck rom
PLzzzzzzz help. Can anyone provide me with karbonn a16 stock rom?
I m going to buy karbonn a16
Any dev here
CLICK THANX IF U HELPED
help me
karbonn a16 have an stock rom ? please help me
How to install custom rom on EMPTY Galaxy S2 or how to transfer gapps and cm12.1 to phone? I cant turn on phone or connect it to pc. I can acces clockworkmod recovery from phone and i can turn it into download mode, but i dont have files to "install zip" from.
gamemaster123 said:
How to install custom rom on EMPTY Galaxy S2 or how to transfer gapps and cm12.1 to phone? I cant turn on phone or connect it to pc. I can acces clockworkmod recovery from phone and i can turn it into download mode, but i dont have files to "install zip" from.
Click to expand...
Click to collapse
follow the below url for your device support
http://forum.xda-developers.com/galaxy-s2
You can find lots of custom ROM for your device over there,
For installation you need to copy .ZIP(cm-xx/any custom rom) file and Gapps by flasing it in CWM/TWRP any recovery you got.
For CM12.1 and its Gapps please follow below url
http://forum.xda-developers.com/galaxy-s2/development/rom-cyanogenmod-12-1-t3185406
Still having problems please let me know
Dont Forget to click the THANKS button :good:
Give me some time to check Gapps
Also please let me know why you are unable to flash Gapps,
---------- Post added at 11:43 PM ---------- Previous post was at 11:38 PM ----------
Alright I found Gapps for you by following Cm12.1 from
http://forum.xda-developers.com/galaxy-s2/development/rom-cyanogenmod-12-1-t3185406
So now try below URL and select NANO, download it and flash it. Still having Problems please let me know
http://opengapps.org/?download=true&arch=arm&api=5.1&variant=nano
@gamemaster123 any updates
Thanks for answering but i still have a problem.
I have "EMPTY" phone. I have NO operating system in phone, when it turns on it is just stuck on boot screen logo.
Can i somehow insert .zip files (cm12.1, gapps...) into phone and then install them from recovery?
Is there some way that i can install any operating system through computer without phone?
Thanks for replies. It would mean a lot if you help.
Regards