i am not sure if i posted this in the right forum, i couldn't find my device, can anyone find or get me the stock recovery for the AT&T Huawei Fusion 2? please help
ahawkua said:
i am not sure if i posted this in the right forum, i couldn't find my device, can anyone find or get me the stock recovery for the AT&T Huawei Fusion 2? please help
Click to expand...
Click to collapse
Here is a .zip file containing a backup of the stock Huawei Fusion 2 ROM inside the .zip file is the stock recovery image. You can download the .zip file from here.
oh thank you!! so there is the rom and the stock recovery? do i just flash it through clockworkmod? will it replace clockworkmod automatically with the stock recovery or will i have to flash that too?
ahawkua said:
oh thank you!! so there is the rom and the stock recovery? do i just flash it through clockworkmod? will it replace clockworkmod automatically with the stock recovery or will i have to flash that too?
Click to expand...
Click to collapse
What you do is transfer the backup to your sdcard and then use CWMR to restore the stock backup. Restoring the stock backup should replace CWMR with the stock recovery image. For more information I would recommend taking a look at this guide here.
shimp208 said:
Here is a .zip file containing a backup of the stock Huawei Fusion 2 ROM inside the .zip file is the stock recovery image. You can download the .zip file from here.
Click to expand...
Click to collapse
I tried to download the file and I received an "Error (500)" page from DropBox. Is the link still valid?
anonchalantsigh said:
I tried to download the file and I received an "Error (500)" page from DropBox. Is the link still valid?
Click to expand...
Click to collapse
Just checked the link and it still works fine, if you need I can download it for you and upload it to my Google Drive and provide you a download link just let me know .
shimp208 said:
Just checked the link and it still works fine, if you need I can download it for you and upload it to my Google Drive and provide you a download link just let me know .
Click to expand...
Click to collapse
Just tried it again, it worked this time. Thanks a bunch!
Sent from my Nexus 7 using Spacestar Ordering
at&t stuck logo
plz help i tried flashing a custom rom but it failed and now iam stuck at the at&t logo plz helpppp
stuck at at&t logo
dude i also need help iam stuck at at&T logo as i failed to flash custom rom on u8665
---------- Post added at 06:55 PM ---------- Previous post was at 06:51 PM ----------
dude i also need help iam stuck at at&T logo as i failed to install CyanogenMod on u8665 huwei i had followed the the tutorial http://forum.xda-developers.com/showthread.php?t=2368790
but the zip part i failed and now iam stuck at the at&t logo
iam not even sure if i soft brick my phone
help is required plz help
ali761 said:
dude i also need help iam stuck at at&T logo as i failed to flash custom rom on u8665
---------- Post added at 06:55 PM ---------- Previous post was at 06:51 PM ----------
dude i also need help iam stuck at at&T logo as i failed to install CyanogenMod on u8665 huwei i had followed the the tutorial http://forum.xda-developers.com/showthread.php?t=2368790
but the zip part i failed and now iam stuck at the at&t logo
iam not even sure if i soft brick my phone
help is required plz help
Click to expand...
Click to collapse
To help me understand what went wrong, do you have Clockworkmod Recovery installed on your device and are you still able to get into recovery mode? What step out of the procedure in thread you linked to failed (Did it fail on step 1, step 2, etc.)? If you can answer these questions I can help you out some more. Also if you need to flash your device back to the stock ROM check out this thread. Let me know if you still have questions I'll be happy to help.
at&t logo stuck
dude i have cwm installed i can get into the recovery mode the volume up and power button also i failed at step 9 as i could not extract the contents and game me an error like cant mount sd card i rebotted and stuck at the at&t logo
also the contents were in the internal sd card
i am really worried and now i dnt want to install custom rom i just want it the way it should be like the original
srry for my bad english
---------- Post added at 06:36 AM ---------- Previous post was at 06:31 AM ----------
ally Posted by ali761 View Post
dude i also need help iam stuck at at&T logo as i failed to flash custom rom on u8665
---------- Post added at 06:55 PM ---------- Previous post was at 06:51 PM ----------
dude i also need help iam stuck at at&T logo as i failed to install CyanogenMod on u8665 huwei i had followed the the tutorial http://forum.xda-developers.com/show....php?t=2368790
but the zip part i failed and now iam stuck at the at&t logo
iam not even sure if i soft brick my phone
help is required plz help
To help me understand what went wrong, do you have Clockworkmod Recovery installed on your device and are you still able to get into recovery mode? What step out of the procedure in thread you linked to failed (Did it fail on step 1, step 2, etc.)? If you can answer these questions I can help you out some more. Also if you need to flash your device back to the stock ROM check out this thread. Let me know if you still have questions I'll be happy to help
dude i have cwm installed i can get into the recovery mode the volume up and power button also i failed at step 9 as i could not extract the contents and game me an error like cant mount sd card i rebotted and stuck at the at&t logo
also the contents were in the internal sd card
i am really worried and now i dnt want to install custom rom i just want it the way it should be like the original
srry for my bad english
ali761 said:
Dude i have cwm installed i can get into the recovery mode the volume up and power button also i failed at step 9 as i could not extract the contents and game me an error like cant mount sd card i rebotted and stuck at the at&t logo
also the contents were in the internal sd card
i am really worried and now i dnt want to install custom rom i just want it the way it should be like the original
srry for my bad english
Click to expand...
Click to collapse
I would recommend transferring this stock ROM to your device by booting into recovery mode, connecting your phone to your computer through USB and then using ADB (Which should be accessible in recovery mode) to push the zip to recovery mode which you can then flash. If you have any questions please feel free to continue asking as I'll be happy to answer them.
Related
Hi.
I have rooted my MMX HD using the motochopper.
Now using the stock ROM 4.1.1
While trying to install any custom ROM from the stock recovery, I am getting an error.
While selecting apply update from SD card and selecting the .zip file to update, the installation doesn't start. It says installation aborted automatically.
I unrooted the phone and then tried again but got the same error.
Please need help immediately.
Thanks in advanced.
here is the solution
sandyonlyn said:
Hi.
I have rooted my MMX HD using the motochopper.
Now using the stock ROM 4.1.1
While trying to install any custom ROM from the stock recovery, I am getting an error.
While selecting apply update from SD card and selecting the .zip file to update, the installation doesn't start. It says installation aborted automatically.
I unrooted the phone and then tried again but got the same error.
Please need help immediately.
Thanks in advanced.
Click to expand...
Click to collapse
You first have to install the custom recovery cwm or twrp you can found it in dev section... Then you can enjoy custom roms
Hi.
I have clockworkmod installed. Still I have the same issue.
Let me if anything can be done.
hi
hey bro after rootin u need to install/flash a cwm(clockworkMod) v6 and then use that to flash the rom following the direction given by the rom dev:angel:
---------- Post added at 09:34 AM ---------- Previous post was at 09:28 AM ----------
if ur having the same issue make sure that ua cwm is of the latest version v6.0.3:cyclops:
sandyonlyn said:
Hi.
I have clockworkmod installed. Still I have the same issue.
Let me if anything can be done.
Click to expand...
Click to collapse
Just Curious, after installing CWM, how are you flashing?
So after trying to completely wipe my GS3 and put it back to Stock before selling it, I think ive somehow managed to delete my current ROM and now cant boot.
It can enter recovery mode (CWM) and enter download mode and flash other recoveries throw Odin But I cant load a ROM back on.
I can't access the SD card and can't mount: /System, /preload, /external_sd, /sdcard
I tried sideloading throw ADB but it cant detect the device and Kies did recognize it when I tried a "firmware upgrade and initialization" but refused to work because of its 'current version' (or something like that)
Are there any recoveries that could help? can you flash a ROM directly throw Odin? (i cant seem to find any that work), how do I fix the storage mounting / folder tree?
i9305, CWM recovery v6.0.2.9 and was running CM 11, dont have any usable backups.
Thanks:good:
Go to sammobile and download the stock rom to your phone. If you want to put your phone totaly stock flash the stock recovery too
Bath Salts said:
So after trying to completely wipe my GS3 and put it back to Stock before selling it, I think ive somehow managed to delete my current ROM and now cant boot.
It can enter recovery mode (CWM) and enter download mode and flash other recoveries throw Odin But I cant load a ROM back on.
I can't access the SD card and can't mount: /System, /preload, /external_sd, /sdcard
I tried sideloading throw ADB but it cant detect the device and Kies did recognize it when I tried a "firmware upgrade and initialization" but refused to work because of its 'current version' (or something like that)
Are there any recoveries that could help? can you flash a ROM directly throw Odin? (i cant seem to find any that work), how do I fix the storage mounting / folder tree?
i9305, CWM recovery v6.0.2.9 and was running CM 11, dont have any usable backups.
Thanks:good:
Click to expand...
Click to collapse
You need to ask your question here >> http://forum.xda-developers.com/galaxy-s3/help-i9305 << wrong forum this is 19300.Hope you have not flashed anything from here this could brick your device! If you haven't do as suggested in post above but make sure it is for your model of phone.
---------- Post added at 11:06 AM ---------- Previous post was at 11:01 AM ----------
eskorpiao112 said:
Go to sammobile and download the stock rom to your phone. If you want to put your phone totaly stock flash the stock recovery too
Click to expand...
Click to collapse
Stock recovery gets flashed with stock rom unless it is custom rom which sammobile ones are not
tallman43 said:
You need to ask your question here >> http://forum.xda-developers.com/galaxy-s3/help-i9305 << wrong forum this is 19300.Hope you have not flashed anything from here this could brick your device! If you haven't do as suggested in post above but make sure it is for your model of phone.
---------- Post added at 11:06 AM ---------- Previous post was at 11:01 AM ----------
Stock recovery gets flashed with stock rom unless it is custom rom which sammobile ones are not
Click to expand...
Click to collapse
And i flashed one before flashing the stock...
eskorpiao112 said:
And i flashed one before flashing the stock...
Click to expand...
Click to collapse
Why? Odin files overwrite it so whatever you flash before flashing stock rom with odin gets wiped...Also I mentioned it so that the op would not get confused not to have a go at you .
Ok dude
How to install custom rom on EMPTY Galaxy S2 or how to transfer gapps and cm12.1 to phone? I cant turn on phone or connect it to pc. I can acces clockworkmod recovery from phone and i can turn it into download mode, but i dont have files to "install zip" from.
gamemaster123 said:
How to install custom rom on EMPTY Galaxy S2 or how to transfer gapps and cm12.1 to phone? I cant turn on phone or connect it to pc. I can acces clockworkmod recovery from phone and i can turn it into download mode, but i dont have files to "install zip" from.
Click to expand...
Click to collapse
follow the below url for your device support
http://forum.xda-developers.com/galaxy-s2
You can find lots of custom ROM for your device over there,
For installation you need to copy .ZIP(cm-xx/any custom rom) file and Gapps by flasing it in CWM/TWRP any recovery you got.
For CM12.1 and its Gapps please follow below url
http://forum.xda-developers.com/galaxy-s2/development/rom-cyanogenmod-12-1-t3185406
Still having problems please let me know
Dont Forget to click the THANKS button :good:
Give me some time to check Gapps
Also please let me know why you are unable to flash Gapps,
---------- Post added at 11:43 PM ---------- Previous post was at 11:38 PM ----------
Alright I found Gapps for you by following Cm12.1 from
http://forum.xda-developers.com/galaxy-s2/development/rom-cyanogenmod-12-1-t3185406
So now try below URL and select NANO, download it and flash it. Still having Problems please let me know
http://opengapps.org/?download=true&arch=arm&api=5.1&variant=nano
@gamemaster123 any updates
Thanks for answering but i still have a problem.
I have "EMPTY" phone. I have NO operating system in phone, when it turns on it is just stuck on boot screen logo.
Can i somehow insert .zip files (cm12.1, gapps...) into phone and then install them from recovery?
Is there some way that i can install any operating system through computer without phone?
Thanks for replies. It would mean a lot if you help.
Regards
hey guys need a little help m stuck on the samsung galaxy logo
here is wat i did.
my S3 does not connect to pc no matter wat i do just keeps saying USB not recognized tries nearly everything i could but doesnt connect.
so i used kingoroot to root the phone and i installed TWRP via Terminal command.
i entered recovery
i downloaded EOL] [ROM] [5.1.1] [CyanogenMod] [GCC 4.9] [Excellent] [12/11/15] ArchiDroid V3.1.5 rom installed it all went well but wen it restarts phone doesnt go ahead of the galaxt logo
i downloaded QS-i9300-JB(ob2) rom flashed it same results
can some 1 help plz m stuck
cant even use ODIN as usb not recognozed
|=>AmuzZ<=| said:
hey guys need a little help m stuck on the samsung galaxy logo
here is wat i did.
my S3 does not connect to pc no matter wat i do just keeps saying USB not recognized tries nearly everything i could but doesnt connect.
so i used kingoroot to root the phone and i installed TWRP via Terminal command.
i entered recovery
i downloaded EOL] [ROM] [5.1.1] [CyanogenMod] [GCC 4.9] [Excellent] [12/11/15] ArchiDroid V3.1.5 rom installed it all went well but wen it restarts phone doesnt go ahead of the galaxt logo
i downloaded QS-i9300-JB(ob2) rom flashed it same results
can some 1 help plz m stuck
cant even use ODIN as usb not recognozed
Click to expand...
Click to collapse
Without more info i cannot help you unfortunately. Please provide more and i may consider helping you if its not a serious problem.
thanks for your reply.
please tell me what info u need and i will give as i wrote all i did.
cant seem to get passed the samsung galaxy logo
i had done a backup but kinda lost it is it possible to download i9300 backup from somewer so i can restore it n c if it will work.
i tried googling but cant seem to find the back up. i dont want a rom.zip jus the backup folder i place in TWRP and try
I can upload cm11 TWRP backup if you want. It is a very small package
---------- Post added at 20:03 ---------- Previous post was at 19:59 ----------
If you want, i can upload it in like 30 minutes or so
---------- Post added at 20:07 ---------- Previous post was at 20:03 ----------
Uploading cm 9 backup (12%)
---------- Post added at 20:20 ---------- Previous post was at 20:07 ----------
Backup was made using this version of TWRP https://dl.twrp.me/i9300/twrp-3.0.2-1-i9300.img.html move this file to sdcard and install it as image in TWRP. If you need help, ask me
---------- Post added at 20:44 ---------- Previous post was at 20:20 ----------
https://mega.nz/#!XFc3SRRS!xApFnA1pC0fr4gZXp0iK749eGD9NHLBvxeb4pIVt4tc there you have it If I helped, please press Thanks button
thank u very much let me try it
just tried to restore it. still same issue stuck on samsung logo
any other ideas to wat i can do to get it booting
Do you have a Linux machine? Not virtualbox, but real PC running Ubuntu. Because I've unbricked friends i9300 using Heimdall, because i didint need drivers for linux. On VM it wont work, because it's not recognized by Windows, so it cannot be attached to VM You can also try using Ubuntu Live USB or CD
yes i can get a linux not a problem mayb u can giv me how to do it..
thanks alot
Here is a Video tutorial how to use Heimdall. https://youtu.be/6TgyaUbjcm4
BTW, if You go to download mode, do you have proper Mode lNumber? And are there any mount errors in TWRP?
here is the link to to the my download mode on s3
https://www.dropbox.com/s/n01ncdyzo9jpu6k/IMAG0019.jpg?dl=0
Model reads SHV - E218S
no i don get any mount errors as u used USB OTG to transfer the files to the phone.
So, try this
1. Boot to TWRP
2. Wipe System, Data, cahce, dalvik cache, and internal storage
3. Flash back to noot rom http://arter97.com/browse/S3/ROM/back-to-n00t/back-to-n00t_ROM_V9.zip
4. Flash this kernel zip http://arter97.com/browse/S3/kernel/xda/arter97-kernel-5.0.zip
5.Reboot
Hope it works
I think, that you need specific backup of e218s. Try to look for someone who has e218s, root it, install twrp and make backup to sdcard. Insert sdcard into your device and restore it. That will definetly fix a problem. I was not able to find e218s firmware anywhere, so it might be a little bit hard. You can always send device to any phone service and they will flash the firmware for you
sorry i am a little confused now .
should i try the Heimdall methed?
should i download the rom and kernel in above and flash
or should i try looking for the 218s rom
Sorry i miss read it SHV - E210S
Ahh if You have e210s ,it will be easy, just wipe every partition in TWRP, (including sdcard) and flash this file https://s.basketbuild.com/filedl/de.../CyanogenMod/cm-11-20141122-NIGHTLY-e210s.zip along with these gapps https://www.androidfilehost.com/?fid=95832962473395379 and reboot
I jus downloaded n flased the rom and gapps still same stuck with samsung logo not booting up
|=>AmuzZ<=| said:
I jus downloaded n flased the rom and gapps still same stuck with samsung logo not booting up
Click to expand...
Click to collapse
There has to be something that was done to make it i9300, because there is a thread here that says that you can convert the e210s korean model into the i9300 international model. I can't find it, but i'll make sure to edit this post and insert the link once i've found it. But I was able to find THIS thread which is for the korean variants of the S3. Get yourself a prerooted firmware from HERE and install it.
EDIT: HERE it is the thread for converting the E210S. WAIT? How did it show i9300? It is supposed to show i9305...
EDIT2: I see. You thought it was an i9300. You screwed the device by flashing an i9300 ROM when it was supposed to be the E210S, i9305's Korean relative. Don't make the same mistake or you will really brick your device. Or it may be already screwed because you installed i9300 recovery? What recovery did you install anyways?
IT IS SO MESSED UP, PLEASE CLARIFY WHAT YOU DID AND WHAT YOU INSTALLED SO WE CAN SEE WHAT YOU DID WRONG.
thanks alot ... i installed the pre rooted rom and it came on .. il try and convert it later
thanks alot...
|=>AmuzZ<=| said:
thanks alot ... i installed the pre rooted rom and it came on .. il try and convert it later
thanks alot...
Click to expand...
Click to collapse
*cough*Thanks button*cough*. You welcome. Don't convert it to i9305 because you won't gain anything. If it works let it be. Happy to have helped.
Hi i did a previous thread
http://forum.xda-developers.com/honor-5x/help/os-installed-error-7-t3512747
After that I managed to start Emui and tried to update it
After the update my phone restarted and twrp ran an open recovery script after that when turn on my phone i get honor logo
Im really sorry to start another thread but its not the same problem and i really need help
Calyptos said:
Hi i did a previous thread
http://forum.xda-developers.com/honor-5x/help/os-installed-error-7-t3512747
After that I managed to start Emui and tried to update it
After the update my phone restarted and twrp ran an open recovery script after that when turn on my phone i get honor logo
Im really sorry to start another thread but its not the same problem and i really need help
Click to expand...
Click to collapse
So u installed stock update with twrp right ?
And can u tell me your device model ?
you just followed what isaid right??
you restored a backup that has stock recovery in it..
then how come twrp do anything to you??you sure you didnt uncheck the recovery option while restoring??
---------- Post added at 09:09 AM ---------- Previous post was at 09:06 AM ----------
Calyptos said:
Hi i did a previous thread
http://forum.xda-developers.com/honor-5x/help/os-installed-error-7-t3512747
After that I managed to start Emui and tried to update it
After the update my phone restarted and twrp ran an open recovery script after that when turn on my phone i get honor logo
Im really sorry to start another thread but its not the same problem and i really need help
Click to expand...
Click to collapse
anyway, if you are able access the fastboot, then you got only one way out of this..
just boot into fastboot and flash twrp,
then rebbot recovery and restore again..(make sure the recovery option is selected while restoring menu appears)
and you can boot to emui..
I managed o flash cm thanks forhelping me
Calyptos said:
I managed o flash cm thanks forhelping me
Click to expand...
Click to collapse
good to hear .. GD luck .
Calyptos said:
I managed o flash cm thanks forhelping me
Click to expand...
Click to collapse
finally, you did it!