i wanted to flash cm11 on my xperia u,so i put the zip folder in my device ad went into cwm and did all the wipes,formatted system then when i flashed the rom i got status 7 error :crying: i tried fixing permissions but nothing worked,now iam stuck in sony bootlogo
even my flashtool isn't recognising my deice(i am running windows 8.1)it doesn't even connect in fastbootmode,flashmode :crying:
plz help me!
weirdovivek said:
i wanted to flash cm11 on my xperia u,so i put the zip folder in my device ad went into cwm and did all the wipes,formatted system then when i flashed the rom i got status 7 error :crying: i tried fixing permissions but nothing worked,now iam stuck in sony bootlogo
even my flashtool isn't recognising my deice(i am running windows 8.1)it doesn't even connect in fastbootmode,flashmode :crying:
plz help me!
Click to expand...
Click to collapse
And what made you try a rom in development when you don't have the means to recover from disaster which would surely happen?
Try to see if in the stiky for windows 8 drivers, and flashtool windows 8 instructions if anything works there for you.
Try
Do you use USB 3 ports? Someone have posted solution for them a while ago in the forum, search it.
If you are able to enter cwm then mount the sdcard and load the zip of the rom previously installed on your phone and flash it !
ChikeD said:
And what made you try a rom in development when you don't have the means to recover from disaster which would surely happen?
Try to see if in the stiky for windows 8 drivers, and flashtool windows 8 instructions if anything works there for you.
Try
Do you use USB 3 ports? Someone have posted solution for them a while ago in the forum, search it.
Click to expand...
Click to collapse
no i dont have USB 3 ports,but i will try the other two methods and report back
k13k said:
If you are able to enter cwm then mount the sdcard and load the zip of the rom previously installed on your phone and flash it !
Click to expand...
Click to collapse
i dont have the previous rom zip in my sd card,i didn't face any status 7 error while flashing nightly-1 so i didnt think about backing up or putting an extra rom....now suffering the consequences
weirdovivek said:
i dont have the previous rom zip in my sd card,i didn't face any status 7 error while flashing nightly-1 so i didnt think about backing up or putting an extra rom....now suffering the consequences
Click to expand...
Click to collapse
Is you cwm recovery still functioning?
If it does see if you can mount USB storage and copy rom zip to it.
Do your PC recognize the phone, even in flashmode?
Windows key + R, type devmgmt.msc, connect the phone and look if the screen turns white. If it recognized then flashtool should have it too, if not, install drivers as @chickeD said.
Sent from my Xperia Sola using xda premium
ChikeD said:
Is you cwm recovery still functioning?
If it does see if you can mount USB storage and copy rom zip to it.
Click to expand...
Click to collapse
my cwm is still working but my pc doesn't recognise when i connect phone to pc.....i've tried the above methods...still when i connect in flashmode it stays there for a while then a msg pops up saying drivers not available
thanks anyways
i can't do this anymore tried all methods.....i am going to my friend's house he has win7 so will install flashtool in his pc and flash stock firmware
Cm11 Bootloop
i flashed cm11 android 4.4 kitkat on my phone today .... even after doing all the wipes every time the phone boots after like 20 seconds of use it goes into a bootloop
i thought it was a nightly-1 error so i flashed mclaw's version but the problem still persists
does anyone know a solution for this ?
Thank You
p.s : i changed to cm 11 from MIUI v5 . is there a problem there ?
weirdovivek said:
my cwm is still working but my pc doesn't recognise when i connect phone to pc.....i've tried the above methods...still when i connect in flashmode it stays there for a while then a msg pops up saying drivers not available
Click to expand...
Click to collapse
I wasn't talking about flash mode. When in CWM go to mounts and mount USB storage at the bottom, in theory you should be able to mount it on your PC, never work for me though because I cannot find the MTP drivers or maybe my CWM is not the greatest, but I never had one that did work.
Did the disable driver signing from flashtool site didn't work either?
Also look at this post and see if that works for you.
ChikeD said:
I wasn't talking about flash mode. When in CWM go to mounts and mount USB storage at the bottom, in theory you should be able to mount it on your PC, never work for me though because I cannot find the MTP drivers or maybe my CWM is not the greatest, but I never had one that did work.
Did the disable driver signing from flashtool site didn't work either?
Also look at this post and see if that works for you.
Click to expand...
Click to collapse
dude i've tried every possible method,but nothing worked for me...and in cwm also i was not able to mount it on my pc
P.S:now i've flashed stock from my friend's pc and reverted back to cm11
flash the latest kernel,do all the wipes,format system,flash the latest nightly
androidous said:
i flashed cm11 android 4.4 kitkat on my phone today .... even after doing all the wipes every time the phone boots after like 20 seconds of use it goes into a bootloop
i thought it was a nightly-1 error so i flashed mclaw's version but the problem still persists
does anyone know a solution for this ?
Thank You
p.s : i changed to cm 11 from MIUI v5 . is there a problem there ?
Click to expand...
Click to collapse
u have to format ur system before installing cm11 but be careful..i got a status 7 error while flashing the latest nightly so i was stuck in a bootloop....put an additional rom in ur sd card(in case if anything goes wrong u can flash it) and edit the updater script so that u dont get that error
weirdovivek said:
u have to format ur system before installing cm11 but be careful..i got a status 7 error while flashing the latest nightly so i was stuck in a bootloop....put an additional rom in ur sd card(in case if anything goes wrong u can flash it) and edit the updater script so that u dont get that error
Click to expand...
Click to collapse
i did have a backup of my miui 5 but even now when i flash cm11 it still bootloops after a while .. any help ? :/
---------- Post added at 10:01 AM ---------- Previous post was at 09:55 AM ----------
weirdovivek said:
u have to format ur system before installing cm11 but be careful..i got a status 7 error while flashing the latest nightly so i was stuck in a bootloop....put an additional rom in ur sd card(in case if anything goes wrong u can flash it) and edit the updater script so that u dont get that error
Click to expand...
Click to collapse
i did have a backup of my miui 5 but even now when i flash cm11 it still bootloops after a while .. any help ? :/
maybe u should try the latest build which is out just now check cm11 thread
androidous said:
i did have a backup of my miui 5 but even now when i flash cm11 it still bootloops after a while .. any help ? :/
---------- Post added at 10:01 AM ---------- Previous post was at 09:55 AM ----------
i did have a backup of my miui 5 but even now when i flash cm11 it still bootloops after a while .. any help ? :/
Click to expand...
Click to collapse
follow the intructions for flashing the rom as suggested by op in cm11 thread and u will have no bootloops
Man, flash other ROM that it worked on your phone. I think the most important here is to get out of that bootloop so flash stock or other ROM like eXperience.
Later on you can flash CM11 from the computer.
Sent from my Xperia Sola using xda premium
Related
Hello guys,
I've got an X10mini (E10) (second hand but should not branded)
I'm actually stucked in a bootloop. It happened after I tried flashing the miniCM7 ROM with CWM.
I've tried the wipe data/factory reset frome CWM but nothing happened
I've tried the recovery option from my previous backup
Nothing
I've tried reflashing the Stock Rom (found in one of Xda-developers thread)
And I still got a bootloop (with the Sony Ericson logo)
Could anyone help me? =)
Gahu said:
Hello guys,
I've got an X10mini (E10) (second hand but should not branded)
I'm actually stucked in a bootloop. It happened after I tried flashing the miniCM7 ROM with CWM.
I've tried the wipe data/factory reset frome CWM but nothing happened
I've tried the recovery option from my previous backup
Nothing
I've tried reflashing the Stock Rom (found in one of Xda-developers thread)
And I still got a bootloop (with the Sony Ericson logo)
Could anyone help me? =)
Click to expand...
Click to collapse
Why don't you try a repair with SEUS or PC Companion, that will get you back to original.
You said you did wipe data/factory reset, but did you wipe cache and dalvick-cache too (second one in advanced menu in CWM), because they're filled with useless junk from your old ROM, causing many errors.
SmG67 said:
Why don't you try a repair with SEUS or PC Companion, that will get you back to original.
You said you did wipe data/factory reset, but did you wipe cache and dalvick-cache too (second one in advanced menu in CWM), because they're filled with useless junk from your old ROM, causing many errors.
Click to expand...
Click to collapse
I can't find the SEUS or PCC repair option
And yes I did wipe the dalvick cache but still nothing happens
Gahu said:
I can't find the SEUS or PCC repair option
And yes I did wipe the dalvick cache but still nothing happens
Click to expand...
Click to collapse
Disconnect your phone from your pc
Start PC Companion
Choose Support Zone
It will try to find an update for your phone, but since it's disconnected it can't
It will offer a Repair link
Follow the instructions from there.
SmG67 said:
Disconnect your phone from your pc
Start PC Companion
Choose Support Zone
It will try to find an update for your phone, but since it's disconnected it can't
It will offer a Repair link
Follow the instructions from there.
Click to expand...
Click to collapse
The fact is that the last version of PC Companion doesn't have that Support Zone anymore
and downloading the previous version doesn't help cause it force you to upgrade the software ...
Gahu said:
The fact is that the last version of PC Companion doesn't have that Support Zone anymore
and downloading the previous version doesn't help cause it force you to upgrade the software ...
Click to expand...
Click to collapse
I've updated mine whenever it requested it and in mine it is still there...
SmG67 said:
I've updated mine whenever it requested it and in mine it is still there...
Click to expand...
Click to collapse
Okay I think I might be cursed or something ... Cause this option never show with my PCC ...
I only got a "blank" window even if I restart with the phone unpluged
Gahu said:
Okay I think I might be cursed or something ... Cause this option never show with my PCC ...
I only got a "blank" window even if I restart with the phone unpluged
Click to expand...
Click to collapse
I see, mine looks more like in the screenshot below
You've got an unlocked bootloader right?
I can get you an original SE Firmware to flash with flashtool if you're interested... just let me know...
SmG67 said:
I see, mine looks more like in the screenshot below
You've got an unlocked bootloader right?
I can get you an original SE Firmware to flash with flashtool if you're interested... just let me know...
Click to expand...
Click to collapse
Yeah I unlocked the bootloader with flashtool (the log said it was done properly)
And it would be nice to get the original SE firmware =D (I tried one and it didn't solve anything but still ... what choice do I got?)
Gahu said:
Yeah I unlocked the bootloader with flashtool (the log said it was done properly)
And it would be nice to get the original SE firmware =D (I tried one and it didn't solve anything but still ... what choice do I got?)
Click to expand...
Click to collapse
You don't have much choice i suppose, i'll give you the download link in a pm
Just download it, put it in the firmwares subfolder where flashtool is installed and flash it to your phone, it will take a while because it flashes everything (kernel and rom), but i hope it will help you
SmG67 said:
You don't have much choice i suppose, i'll give you the download link in a pm
Just download it, put it in the firmwares subfolder where flashtool is installed and flash it to your phone, it will take a while because it flashes everything (kernel and rom), but i hope it will help you
Click to expand...
Click to collapse
OH yeah =)
So long to the Bootloop =D Thanks =)
Gahu said:
OH yeah =)
So long to the Bootloop =D Thanks =)
Click to expand...
Click to collapse
Good luck flashing m8 Keep it lying around, you can always get out of trouble
SmG67 said:
Good luck flashing m8 Keep it lying around, you can always get out of trouble
Click to expand...
Click to collapse
I saw your thread.
I also have an x10 Mini and got stuck in a bootloop (colors swishing around on screen). I rooted, installed xrecovery - what shows up in the screen is cwm recovery v 5,0,2,8. I unlocked the boot loader, flashed this Kernel using flash tool (an older version): U20_nAa-14_2.6.29.6-nAa-14.ftf I tried to downloand nAa 11 but 14 kept coming up, so I put that in the firmware file along with the stock Kernel. I forgot to install the drivers, but the flash tool said it was successful. After disconnecting and starting the phone "Ana" words not the symbol came up and the boot loop began. Alternatively, on start up, I can get into cwm recovery. I didn't save the rom or google app zip on my sd card as I assumed I could that after flashing the Kernel, but the bootloop makes impossible
My goal is to install Android Fire 2.3.
I would really appreciate any guidance.
Kubaz said:
I saw your thread.
I also have an x10 Mini and got stuck in a bootloop (colors swishing around on screen). I rooted, installed xrecovery - what shows up in the screen is cwm recovery v 5,0,2,8. I unlocked the boot loader, flashed this Kernel using flash tool (an older version): U20_nAa-14_2.6.29.6-nAa-14.ftf I tried to downloand nAa 11 but 14 kept coming up, so I put that in the firmware file along with the stock Kernel. I forgot to install the drivers, but the flash tool said it was successful. After disconnecting and starting the phone "Ana" words not the symbol came up and the boot loop began. Alternatively, on start up, I can get into cwm recovery. I didn't save the rom or google app zip on my sd card as I assumed I could that after flashing the Kernel, but the bootloop makes impossible
My goal is to install Android Fire 2.3.
I would really appreciate any guidance.
Click to expand...
Click to collapse
Connect your phone to your PC using the usb-cable
Boot into CWm (you say you can)
Go into Mounts and Storage
Choose USB-Mass storage
You should be able to access the sd-card from your pc now and copy the ROM and maybe Gapps.
SmG67 said:
Connect your phone to your PC using the usb-cable
Boot into CWm (you say you can)
Go into Mounts and Storage
Choose USB-Mass storage
You should be able to access the sd-card from your pc now and copy the ROM and maybe Gapps.
Click to expand...
Click to collapse
Worked like a charm!. Thank you very much. I went for mini cm 7 as it seemed the most stable. thanks for your help.
just need to get the sd card to mount and I am all set. Do you have any ideas why I can't get it to mount?
Kubaz said:
Worked like a charm!. Thank you very much. I went for mini cm 7 as it seemed the most stable. thanks for your help.
just need to get the sd card to mount and I am all set. Do you have any ideas why I can't get it to mount?
Click to expand...
Click to collapse
I don't know, apparently it worked fine when you connected it to your pc...
Maybe you could pull all your files off the sd-card to your pc, boot into cwm and format the sd-card (in mounts and storage), then reboot into the rom.
If that's all successful, put the files back on your sd-card.
SmG67 said:
I don't know, apparently it worked fine when you connected it to your pc...
Maybe you could pull all your files off the sd-card to your pc, boot into cwm and format the sd-card (in mounts and storage), then reboot into the rom.
If that's all successful, put the files back on your sd-card.
Click to expand...
Click to collapse
What would happen if I select "apply update from sd card". This is the second option under CWM recovery.
Should I restore from Nanadroid. i s this necessary?
Could partitioning the sd card help? Thanks again!
Kubaz said:
What would happen if I select "apply update from sd card". This is the second option under CWM recovery.
Should I restore from Nanadroid. i s this necessary?
Could partitioning the sd card help? Thanks again!
Click to expand...
Click to collapse
The 'Apply Update.zip' does exactly the same thing as the 'Install zip from sd-card', but the first option only works for zip-files named 'update.zip' in the root of your sd-card, the second option will let you browse the sd-card and select a zip-file with any name. The second option is the one you use to install your ROM.
Restoring from nandroid, just fills your internal phone-memory with the old stuff you had in there, it won't affect your sd-card, other than that it reads the nandroid from that sd-card.
Your sd-card needs to be formatted with the fat-filesystem to work properly, so partitioning or not makes not much of a difference, only that the available space for your stuff (music, photo's, etc.) is less because the other partitions take up space too.
If you can flash your ROM in CWM from sd-card I don't really see any problem with your sd-card.
worked like a charm. many thanks!
Kubaz said:
I saw your thread.
I also have an x10 Mini and got stuck in a bootloop (colors swishing around on screen). I rooted, installed xrecovery - what shows up in the screen is cwm recovery v 5,0,2,8. I unlocked the boot loader, flashed this Kernel using flash tool (an older version): U20_nAa-14_2.6.29.6-nAa-14.ftf I tried to downloand nAa 11 but 14 kept coming up, so I put that in the firmware file along with the stock Kernel. I forgot to install the drivers, but the flash tool said it was successful. After disconnecting and starting the phone "Ana" words not the symbol came up and the boot loop began. Alternatively, on start up, I can get into cwm recovery. I didn't save the rom or google app zip on my sd card as I assumed I could that after flashing the Kernel, but the bootloop makes impossible
My goal is to install Android Fire 2.3.
I would really appreciate any guidance.
Click to expand...
Click to collapse
"Alternatively, on start up, I can get into cwm recovery".
I have the exact same problem though i cant get into clockworkmod recovery. May i know how you got into cwm recovery? Any help is appreciated.
Thanks!
Hi, all.
I have upload to my phone FXP 227 from the UNRESTRICT.LI/FXP. When i wipe cache and reboot phone it's install some of the programs (may be 84 i count) and then stuck on Android update... The OS not start. So i want to go back to 226 but when i don't have a OS how to do it? I use CWM v6.0.2.8 but can't mount the storage whit USB... I have install a driver for USB from Sony site the driver is recognize, but can't load any drives..
Any help is useful!
Infinity_bg said:
Hi, all.
I have upload to my phone FXP 227 from the UNRESTRICT.LI/FXP. When i wipe cache and reboot phone it's install some of the programs (may be 84 i count) and then stuck on Android update... The OS not start. So i want to go back to 226 but when i don't have a OS how to do it? I use CWM v6.0.2.8 but can't mount the storage whit USB... I have install a driver for USB from Sony site the driver is recognize, but can't load any drives..
Any help is useful!
Click to expand...
Click to collapse
Did you wipe personal data and wiped dalvik cache also mate?
DaRk-L0rD said:
Did you wipe personal data and wiped dalvik cache also mate?
Click to expand...
Click to collapse
Affirmative. I do it several times... no luck at all.
Infinity_bg said:
Affirmative. I do it several times... no luck at all.
Click to expand...
Click to collapse
The only solution mate is the one that IAmNice told you. Flash stock rom and then try installing again cm.
IAmNice said:
Can you go into flashmode? If you can use flashtool to flash a stock ROM and then flash fxp 226..
Sent from my LT22i using xda app-developers app
Click to expand...
Click to collapse
No i don't tray that already... i forgot hot to use that tool hahaha, all the time updates goes smooth so i don't use it for long time. Is there any new version of that tool and way to do it safely? And were is the web page that can download the last versions, drivers and etc.
Infinity_bg said:
No i don't tray that already... i forgot hot to use that tool hahaha, all the time updates goes smooth so i don't use it for long time. Is there any new version of that tool and way to do it safely? And were is the web page that can download the last versions, drivers and etc.
Click to expand...
Click to collapse
Drivers are already included for most of xperia devices.
Here you can download the latest version: http://androxyde.github.io/
There is also a tutorial on youtube on how to use flashtool.
Thanks all now i am searching for stock ROM... any for Europe.
PS: I manage to repair but whit CWM. Just have a backup for CM 9.
And i tray Flash tool but when i have CWM installed how to enter in flash boot. I have remember that there is something like UP and Down button that is for sound volume change but this not works.
Infinity_bg said:
Thanks all now i am searching for stock ROM... any for Europe.
PS: I manage to repair but whit CWM. Just have a backup for CM 9.
And i tray Flash tool but when i have CWM installed how to enter in flash boot. I have remember that there is something like UP and Down button that is for sound volume change but this not works.
Click to expand...
Click to collapse
You cam access fastboot mode this way:
turn off the phone
Plug usb cable on pc
Press volume up key while plugging usb on your phone. You will see that the led bar becomes blue.
Done
First of all , ihave to say , iam no GURU.
But since not many work on it and cuoco92 seems to be busy at the moment..
Ive had the phone for a year or so and have dealt with most problems that appear..
so pls feel free to ask and ill try to answer.
Any thanks will be appreciated..
there is an upload on my dropbox for the needed tools..will post as soon as it finishes
https://www.dropbox.com/sh/wy8tn4xzfkpi9hn/AACRsiI3RsmTpshwi8aG4Gx5a?dl=0
Spflash tool :working
Lewa rom for spflash:working
Appropriate drivers
Low internal memory after upgrading to MIUI 5.7
After upgrading to the latest MIUI update, the internal memory doesn't seems to be detected properly. I have more that 5 GB left, however it shows that I have 0KB left out of 6.3 MB. I am unable to access my old photos and videos. Whatapp doesn't work properly.
Any solution on how to fix the low internal memory issue on MIUI rom?
anilkm003 said:
After upgrading to the latest MIUI update, the internal memory doesn't seems to be detected properly. I have more that 5 GB left, however it shows that I have 0KB left out of 6.3 MB. I am unable to access my old photos and videos. Whatapp doesn't work properly.
Any solution on how to fix the low internal memory issue on MIUI rom?
Click to expand...
Click to collapse
does the miui work correctly?plz give some link so i can look into it.some screenshot of you phone data if you can.i guess the error is into the partitioning
Sent from my 6043D using XDA Free mobile app
hi sir, i have an error on TWRP i tried installing diff. versions of Recovery on it using Mobile uncle but i cant seem to fix it, im getting "unable to mount " so i am unable full wipe the phone, im guessing i need to reflash the stock rom using spflashtool but i searched everything on the net i cant det stock rom and working walkthrough and working files. any help would be appreciated thank u so much
The official rom is unavailable.
You can find another rom to install through the tools. But it has to be in the right format.i wouldn't change the recovery through mobile uncle. I would recommend changing it through appropriate tool. I'll be uploading a dropbox file with a rom you can use. Wait till tomorrow and you'll be ok.
Sent from my 6043D
Stuff uploaded.
Sent from my 6043D
anilkm003 said:
After upgrading to the latest MIUI update, the internal memory doesn't seems to be detected properly. I have more that 5 GB left, however it shows that I have 0KB left out of 6.3 MB. I am unable to access my old photos and videos. Whatapp doesn't work properly.
Any solution on how to fix the low internal memory issue on MIUI rom?
Click to expand...
Click to collapse
you updated through recovery??
Sent from my 6043D
Thanks bro for uploading files and please bro can you write step by step that how to use sp flash tools....please its emergency reply soon...am waiting ...and I only want to install twrp so please tell me how to install twrp with sp flash tools and one more thing that when I plug usb in pc and mobile it stucks on boot loop so can I use sp tools while in bootlop or I have to remove battery by teradown phone
hi Sir, thanks for uploading helpful files. ill try to flash them today - crossed finger - ill try to flash twrp 1st using spflashtool ill update you for any progress thank you
shubhamx01 said:
Thanks bro for uploading files and please bro can you write step by step that how to use sp flash tools....please its emergency reply soon...am waiting ...and I only want to install twrp so please tell me how to install twrp with sp flash tools and one more thing that when I plug usb in pc and mobile it stucks on boot loop so can I use sp tools while in bootlop or I have to remove battery by teradown phone[/QUOTE
you can get into the bootloader by key combination.to tell you the truth since its always booting up if you keep the up(i think) volume button pressed it will eventually get into recovery.
anyway the sp flash tools is quite easy..just add the scatter file that is provided in my DB and open the rom
all things will go to their appropriate places.the rom works 100%
i used it for a few days until i found my cuoco92 backup (which i like more)
keep me in the loop if something happens
Click to expand...
Click to collapse
Bro sorry am little weak in english and did you mean that should I use sp tools while in recovery or I can use it in while in bootloop??and I am unable to go in bootloader can you give me key combinations ....and I also have custom recovery and aroma manager but I am unable to use otg cable is there any other mathod where is transfer rom into phone and brother you are so helpfull bro may god bless you because in nowdays no one helps others but you are awesome bro thanks very much
i meant using it in bootloop..in the drivers i uploaded there is a driver that you can use even in bootloop and the phone gets recognised as a proper usb device.then sp flash can work fine.if i remember correctly the driver is called bootloader driver
Sent from my 6043D
Bro today I try to install twrp using spflash tools and at down where installing procees ...there I saw procces completes and this is written in red coluur and a message appear that vrom need to install properly what's wrong with that and when I tried to go in recovery there was no twrp please tell me my mistake or I have to download rom to install with flashtools.....and one more thing please how to install drivers propery because I can't found install options in driver rar or extrttact it and driver will install automatically........and please bro last thing can you give me your facebook I'd so I can tell you my problem anytime because I have not pc at home and I have to go city to use pc so please reply as soon as possible
I'll upload a text file with guide
Sent from my 6043D
Thanks bro upload file asap
anilkm003 said:
After upgrading to the latest MIUI update, the internal memory doesn't seems to be detected properly. I have more that 5 GB left, however it shows that I have 0KB left out of 6.3 MB. I am unable to access my old photos and videos. Whatapp doesn't work properly.
Any solution on how to fix the low internal memory issue on MIUI rom?
Click to expand...
Click to collapse
I had the same problem. Seems that the ROM is not recognising all the "virtual" sdcard that we have in our mobile phone.
Anybody knows how to solve it?
Bro I format my whoke flash with sp flash tools and now my phone doesnot booting and not showing anything but carging led in working when coNnecting to charger......now sp flashtools not detecting my phone please tell me how to detect phone with flash tools is ....is I need new drivers or what please help me
Bro I flashed twrp with flash tools suceesfully and when I try to flash rom with twrp I get error like unable to mount data and unable to mount internal storage and i also check internal memory with file manager in twrp but it shows 0 mb internal memory......please please please reply bro please please tell me how to fix it bro please reply at least once
shubhamx01 said:
Bro I flashed twrp with flash tools suceesfully and when I try to flash rom with twrp I get error like unable to mount data and unable to mount internal storage and i also check internal memory with file manager in twrp but it shows 0 mb internal memory......please please please reply bro please please tell me how to fix it bro please reply at least once
Click to expand...
Click to collapse
I think it will be better if you try to install the ROM using Flash Tool instead of TWRP.
Do you have the stock one?
I have TWRP in my A310. Flashed http://forum.xda-developers.com/a310/development/resurrection-remix-lp-5-5-t3160496 this rom, dunno which version TWRP I have, so now phone is not starting up.
Any help will be appreciated, Guys I don't want to take my phone to Service center ppl. They are horrible.
Phone is turning on, trying to boot - failing - restarting - trying to enter recovery as a TWRP logo shows up then screen flickers and nothing happens and this keeps going on. TWRP also tries to open MTP but that fails too.
Dosen't stay in Bootloader - fastboot as well, restarts.
Are you able to go to recovery?
Do you have a backup of previous rom? If you have it, try flashing stock rom using ygdp tool and after that restore the backup.
Thanks for quick reply
shaijuvjohn said:
Are you able to go to recovery?
Do you have a backup of previous rom? If you have it, try flashing stock rom using ygdp tool and after that restore the backup.
Click to expand...
Click to collapse
No, I am not able to go to recovery.
A quick question to those who have used YGDP, Does it work while is switched off ?
headlessNick said:
No, I am not able to go to recovery.
A quick question to those who have used YGDP, Does it work while is switched off ?
Click to expand...
Click to collapse
Do you have the backup of previous rom?
If you are going to flash stock rom, gydp tool will detect the phone even without battery too.
shaijuvjohn said:
Do you have the backup of previous rom?
If you are going to flash stock rom, gydp tool will detect the phone even without battery too.
Click to expand...
Click to collapse
Let me check that when I get back home and let you know, I must have backups If GYDY worked, then we shall party :angel::cyclops::highfive:
Can someone point to a GYDP guide, I found one but the download links don't work :cyclops:
headlessNick said:
Let me check that when I get back home and let you know, I must have backups If GYDY worked, then we shall party :angel::cyclops::highfive:
Click to expand...
Click to collapse
Try YGDP and flash stock and then restore the backup if available.
When you flash the stock rom it will repalce the twrp also. We can easily install twrp through ygdp. Follow the steps.
1. Select your .cpb file and apply
2. YGDP will unzip the cpb file, path may be C:\YLXZGJ\YGDP\DownFiles\8297W (in my system this is the path, please check after unzipping)
3. Check the unzipped folder contents
4. There will be a file named recovery.img
5. Delete the recovery.img file
6. Copy your twrp recovery to the unzipped folder and rename it to recovery.img
7. Click on start button
8. Remove battery from your phone and connect it to the usb
9. It will detect your phone and start flashing
10. Wait for flashing finishes to 100 %
11. Done. Disconnect phone. You flashed stock rom with twrp recovery
12. Copy the backup to memory card and insert it in phone
12. Insert battery and press power button and volume up key, go to twrp recovery, restore your backup and enjoy
---------- Post added at 12:00 PM ---------- Previous post was at 11:56 AM ----------
headlessNick said:
Can someone point to a GYDP guide, I found one but the download links don't work :cyclops:
Click to expand...
Click to collapse
http://www.needrom.com/wp-content/uploads/2014/10/YGDP_Setup_V3.83_Assembly.zip
Try this one, i am using this one on A311.
You need to have these drivers installed in your system - DA USB VCOM Port, PreLoader USB VCOM (Android)
If you have drivers not installed use the below one from the attachment. :victory:
Thanks - Tying...
headlessNick said:
Thanks - Tying...
Click to expand...
Click to collapse
Thanks a lot guys especially
shaijuvjohn said:
shaijuvjohn
Click to expand...
Click to collapse
, I should have probably read all the instructions, It was all there. Had some difficulties in installing the drivers as COM port But at the end :victory: works like charm.
I will definitely spread this knowledge with who ever needs in future.
Proud owner of stocked rooted custom recovery MMX Nitro A310 and OnePlus One
headlessNick said:
Thanks a lot guys especially , I should have probably read all the instructions, It was all there. Had some difficulties in installing the drivers as COM port But at the end :victory: works like charm.
I will definitely spread this knowledge with who ever needs in future.
Proud owner of stocked rooted custom recovery MMX Nitro A310 and OnePlus One
Click to expand...
Click to collapse
Yup because i already went through all these situations and i know the difficulties. That is why i gave you each steps. Always Happy to HELP. :victory:
didnt worked
shaijuvjohn said:
Are you able to go to recovery?
Do you have a backup of previous rom? If you have it, try flashing stock rom using ygdp tool and after that restore the backup.
Click to expand...
Click to collapse
I hv tried to installed from ygdp stock rom but it stopped in between. The process wont complete, plz help me if u can
Micromax q391
My Micromax canvas q391 not working its just stuck on the Micromax logo n I'm not even able to access the recovery mode n does not have the backup of rom
What can I do to start it up please help
Even I tried to Flash with YGDP but no use. My mobile is not stable suddenly and automatically it disconnects from my system even connected with USB Cable.
..
WHen I open the link a page comes up saying " Needrom do not authorizing, the links referred by another website for download the ROMs.
The link must obligatory be clicked from of Needrom.com
"
What should I do....
same problrm faced
headlessNick said:
I have TWRP in my A310. Flashed http://forum.xda-developers.com/a310/development/resurrection-remix-lp-5-5-t3160496 this rom, dunno which version TWRP I have, so now phone is not starting up.
Any help will be appreciated, Guys I don't want to take my phone to Service center ppl. They are horrible.
Phone is turning on, trying to boot - failing - restarting - trying to enter recovery as a TWRP logo shows up then screen flickers and nothing happens and this keeps going on. TWRP also tries to open MTP but that fails too.
Dosen't stay in Bootloader - fastboot as well, restarts.
Click to expand...
Click to collapse
i had faced same problem ..
but stay calm .. just download ypdp flash tool .. download stock rom and flash it using ypdp tool ... remember while flashing remove the battery otherwise it will not detect the phone , as my was not detected .. but as soon i removed the battery , it flashed the rom in couple of minutes . and after flashing remember to flash a custom rom as the stock rom gets corrupted causing these issues .. installed darkeness redefined rom and it is woking extremely fast , best rom in my opinion . choise is upon you ,
Hope my message helped you , for any more questions do ask.
boot loop
i have the same problem boot loop but im not able to flash becoz my micromax canvas nitro a311 disconnecting continuously on lap im not able to open recovery mode also help:fingers-crossed:
hey guys need a little help m stuck on the samsung galaxy logo
here is wat i did.
my S3 does not connect to pc no matter wat i do just keeps saying USB not recognized tries nearly everything i could but doesnt connect.
so i used kingoroot to root the phone and i installed TWRP via Terminal command.
i entered recovery
i downloaded EOL] [ROM] [5.1.1] [CyanogenMod] [GCC 4.9] [Excellent] [12/11/15] ArchiDroid V3.1.5 rom installed it all went well but wen it restarts phone doesnt go ahead of the galaxt logo
i downloaded QS-i9300-JB(ob2) rom flashed it same results
can some 1 help plz m stuck
cant even use ODIN as usb not recognozed
|=>AmuzZ<=| said:
hey guys need a little help m stuck on the samsung galaxy logo
here is wat i did.
my S3 does not connect to pc no matter wat i do just keeps saying USB not recognized tries nearly everything i could but doesnt connect.
so i used kingoroot to root the phone and i installed TWRP via Terminal command.
i entered recovery
i downloaded EOL] [ROM] [5.1.1] [CyanogenMod] [GCC 4.9] [Excellent] [12/11/15] ArchiDroid V3.1.5 rom installed it all went well but wen it restarts phone doesnt go ahead of the galaxt logo
i downloaded QS-i9300-JB(ob2) rom flashed it same results
can some 1 help plz m stuck
cant even use ODIN as usb not recognozed
Click to expand...
Click to collapse
Without more info i cannot help you unfortunately. Please provide more and i may consider helping you if its not a serious problem.
thanks for your reply.
please tell me what info u need and i will give as i wrote all i did.
cant seem to get passed the samsung galaxy logo
i had done a backup but kinda lost it is it possible to download i9300 backup from somewer so i can restore it n c if it will work.
i tried googling but cant seem to find the back up. i dont want a rom.zip jus the backup folder i place in TWRP and try
I can upload cm11 TWRP backup if you want. It is a very small package
---------- Post added at 20:03 ---------- Previous post was at 19:59 ----------
If you want, i can upload it in like 30 minutes or so
---------- Post added at 20:07 ---------- Previous post was at 20:03 ----------
Uploading cm 9 backup (12%)
---------- Post added at 20:20 ---------- Previous post was at 20:07 ----------
Backup was made using this version of TWRP https://dl.twrp.me/i9300/twrp-3.0.2-1-i9300.img.html move this file to sdcard and install it as image in TWRP. If you need help, ask me
---------- Post added at 20:44 ---------- Previous post was at 20:20 ----------
https://mega.nz/#!XFc3SRRS!xApFnA1pC0fr4gZXp0iK749eGD9NHLBvxeb4pIVt4tc there you have it If I helped, please press Thanks button
thank u very much let me try it
just tried to restore it. still same issue stuck on samsung logo
any other ideas to wat i can do to get it booting
Do you have a Linux machine? Not virtualbox, but real PC running Ubuntu. Because I've unbricked friends i9300 using Heimdall, because i didint need drivers for linux. On VM it wont work, because it's not recognized by Windows, so it cannot be attached to VM You can also try using Ubuntu Live USB or CD
yes i can get a linux not a problem mayb u can giv me how to do it..
thanks alot
Here is a Video tutorial how to use Heimdall. https://youtu.be/6TgyaUbjcm4
BTW, if You go to download mode, do you have proper Mode lNumber? And are there any mount errors in TWRP?
here is the link to to the my download mode on s3
https://www.dropbox.com/s/n01ncdyzo9jpu6k/IMAG0019.jpg?dl=0
Model reads SHV - E218S
no i don get any mount errors as u used USB OTG to transfer the files to the phone.
So, try this
1. Boot to TWRP
2. Wipe System, Data, cahce, dalvik cache, and internal storage
3. Flash back to noot rom http://arter97.com/browse/S3/ROM/back-to-n00t/back-to-n00t_ROM_V9.zip
4. Flash this kernel zip http://arter97.com/browse/S3/kernel/xda/arter97-kernel-5.0.zip
5.Reboot
Hope it works
I think, that you need specific backup of e218s. Try to look for someone who has e218s, root it, install twrp and make backup to sdcard. Insert sdcard into your device and restore it. That will definetly fix a problem. I was not able to find e218s firmware anywhere, so it might be a little bit hard. You can always send device to any phone service and they will flash the firmware for you
sorry i am a little confused now .
should i try the Heimdall methed?
should i download the rom and kernel in above and flash
or should i try looking for the 218s rom
Sorry i miss read it SHV - E210S
Ahh if You have e210s ,it will be easy, just wipe every partition in TWRP, (including sdcard) and flash this file https://s.basketbuild.com/filedl/de.../CyanogenMod/cm-11-20141122-NIGHTLY-e210s.zip along with these gapps https://www.androidfilehost.com/?fid=95832962473395379 and reboot
I jus downloaded n flased the rom and gapps still same stuck with samsung logo not booting up
|=>AmuzZ<=| said:
I jus downloaded n flased the rom and gapps still same stuck with samsung logo not booting up
Click to expand...
Click to collapse
There has to be something that was done to make it i9300, because there is a thread here that says that you can convert the e210s korean model into the i9300 international model. I can't find it, but i'll make sure to edit this post and insert the link once i've found it. But I was able to find THIS thread which is for the korean variants of the S3. Get yourself a prerooted firmware from HERE and install it.
EDIT: HERE it is the thread for converting the E210S. WAIT? How did it show i9300? It is supposed to show i9305...
EDIT2: I see. You thought it was an i9300. You screwed the device by flashing an i9300 ROM when it was supposed to be the E210S, i9305's Korean relative. Don't make the same mistake or you will really brick your device. Or it may be already screwed because you installed i9300 recovery? What recovery did you install anyways?
IT IS SO MESSED UP, PLEASE CLARIFY WHAT YOU DID AND WHAT YOU INSTALLED SO WE CAN SEE WHAT YOU DID WRONG.
thanks alot ... i installed the pre rooted rom and it came on .. il try and convert it later
thanks alot...
|=>AmuzZ<=| said:
thanks alot ... i installed the pre rooted rom and it came on .. il try and convert it later
thanks alot...
Click to expand...
Click to collapse
*cough*Thanks button*cough*. You welcome. Don't convert it to i9305 because you won't gain anything. If it works let it be. Happy to have helped.