Hello I am French I have a problem after the installation of the kernel and the ROM, I do not have a network anymore and the ROM does not recognize my flea(chip)
You can help me thank you
http://forum.xda-developers.com/showthread.php?t=1304752
Have u unlocked your bootloader?
Sent from my X10i using XDA App
Yes I have unlock bootloader I believe I installed the ROM and I have no network...
plz help ..
Do you mean that you have no mobile data ? Or actually no service.
whats is ur baseband version ???
no network
i have no service .. my baseband is 2.1.71
may be the unlock does not work
Is your sim unlocked?
Sent from my X10i using XDA App
I don't know how to tell?
I resolved my problem after installing the ROM my SIM card was not detected and I had no network I went to see the setting I did not see the baseband version of my writing there had "unknown baseband" I reflash my baseband 01.02.71 with Flashtool with "X10i_2.1.71_ARO.ftf" and then I reflash the kernel "X10_a1Kernel_v4For.a1exanders.M1U1.v11.and.later.ftf" and my SIM and again, and I detected the network!
Sorry I'm French
Good to hear u fixed it pal
Sent from my X10i using XDA App
acerulz said:
whats is ur baseband version ???
Click to expand...
Click to collapse
Hi. plz help me. i have the same problem except it shows my baseband 2.1.71. still i dont have no network. X10i. I rooted the phone. unlocked the bootlaoder. then tried to install CM7 through cwmrecovery. the firmware dint flash.. after i turned on my phone since then iam having no network. please insert simcard and turn on the phone.
Omarjivraj said:
Hi. plz help me. i have the same problem except it shows my baseband 2.1.71. still i dont have no network. X10i. I rooted the phone. unlocked the bootlaoder. then tried to install CM7 through cwmrecovery. the firmware dint flash.. after i turned on my phone since then iam having no network. please insert simcard and turn on the phone.
Click to expand...
Click to collapse
is your phone in contract or simunlocked?
I have the same problem. i played with my phone. The phone wasn't locked to a specific operator( i yhink it was unlocked - is a SH Phone). The ideea is that i played with s1tool and everythinh was ok, i flashed the phone, i installed a new room (m&m, but with another kernel, nmot the one recomanded), after that the phone did not boot, i reflashed the phone with diffrent kernels(my mistake) and after that the s1tool told me "NOT RECOGNIZED SIMLOCK CERTIFICATE". I installed a rom for locked bootloader with doom kernel, but now my phone doesen't see my network anymore -please insert sin card and restart. AAA.. before that i used SEUD and installed the default room - my phone was capable to see the available networks but it keeps told me - please insert sim card and restart. Now i have the MUI rom with doom kernel (both for looked bootloader - the version with the xrecovery installer), and my phone doesn't see the networks anymore.
Could you help me pls!
Thanks.
i have the same problem with my mini. in the "about phone" section i see
Model Number E10i
Firmware version 2.1-update1
Baseband version M76XX-.....-015
Kernel Version 2.6.29 [email protected]#1
Build Number 2.1.1.A.0.6
what should i flash?
i have the seem problem too i think we need to flash other kernel
tapxxor said:
i have the same problem with my mini. in the "about phone" section i see
Model Number E10i
Firmware version 2.1-update1
Baseband version M76XX-.....-015
Kernel Version 2.6.29 [email protected]#1
Build Number 2.1.1.A.0.6
what should i flash?
Click to expand...
Click to collapse
U need to use seus or pc companion to update
Sent from my X10i using XDA
Guys,
You have some mistakes:
First unlocking bootloader that somewhere harm your device.
Second flashing another kernel instead of recommended one.
Third you don't pay attention enough to installing rom's procedures.
It is important to use the specific kernels that rom maker tells us.
Good luck all..
Sent from my X10 using xda premium
I used SEUS and put the stock rom ... the phone still not recognize my card, but it can see the available networks. I have one question. If i use SEUS when i install the rom it install the specific kernel or the phone keep the one that i installed?
It installs the specific kernel of stock rom..
Sent from my X10 using xda premium
Ok. Somehow i fixed my problem. That's what i've done:
I used SEUS and i installed the stock rom. Then I installed flashtool (try to do a fresh install of flashtool if you allready have it installed) i installed the busybox and then i used the bootloader unlock from plugins menu. After i unlocked my bootloader the phoen saw my network immediatley. I supose that everyone else that have this problem have the bootloader locked or they tried to unlock the bootloader and didn's succeed.
I hope this will help someone. GoodLuck!
Related
hey guys,,,,i want to unlock the bootloader,,i have tried the conventional method given here http://forum.xda-developers.com/showthread.php?t=1254087 ,,i read some readers reverting to 2.1 and then unlocking the bootloader,,i would be very thankful if someone can tell me the steps of unlocking the bootloader by this method,,thanks
1. Flash 2.1
2. root it
3. Keep debugging and unknown sources on and plug in your phone.
4. Run the unlocking tool
5. Flash 2.3 firmware
6. Flash DooMKernel (optional)
Sent from my X10i using XDA App
thanks a lot mate,,,,i found some roms here http://forum.xda-developers.com/showpost.php?p=11038646&postcount=1 ,,is there a particular rom suitable for me or i can flash any of the 2.1 roms?
aR_ChRiS said:
1. Flash 2.1
2. root it
3. Keep debugging and unknown sources on and plug in your phone.
4. Run the unlocking tool
5. Flash 2.3 firmware
6. Flash DooMKernel (optional)
Sent from my X10i using XDA App
Click to expand...
Click to collapse
azuzu has a better method...i try it and it works fine:
http://forum.xda-developers.com/showthread.php?t=1196421
i hope i get the right thread ^^
greez
I have followed the 2.1 technique. And it was successful. I flashed global generic 2.1 fw. here is the link http://forum.xda-developers.com/showthread.php?t=920746
And once you unlock bootloader flash a pre rooted 2.3 rom and with .71 baseband. After that you can flash doomlord kernel.
hey ,guys,,i am now on 2.1 now how should i root it,,,azuzu s method is for 2.3 roms...
hey ynkamat,,,do i need to root after flashing 2.1 or just start the bootloader unlock file striaghtaway
hey guys,,i am now on 2.1 rooted firmware,,,even now when i am using the unlocking tool ,it is not unlocking it,it says bootools \adb.exe is not rcognized ,,help
aR_ChRiS said:
1. Flash 2.1
2. root it
3. Keep debugging and unknown sources on and plug in your phone.
4. Run the unlocking tool
5. Flash 2.3 firmware
6. Flash DooMKernel (optional)
Sent from my X10i using XDA App
Click to expand...
Click to collapse
dude,,,the unlocking tool is not working,,,it says boottools\adb.exe is not recognised as an operable program or batch file,,,help
ynkamat said:
I have followed the 2.1 technique. And it was successful. I flashed global generic 2.1 fw. here is the link http://forum.xda-developers.com/showthread.php?t=920746
And once you unlock bootloader flash a pre rooted 2.3 rom and with .71 baseband. After that you can flash doomlord kernel.
Click to expand...
Click to collapse
hey dude,,,can u tell me the exact 2.1 rom u flashed from the list given in your link?
Hey sorry for keeping you waiting. just saw your posts. Dont spam or else you feel feel the heat of moderators. You need to root the phone first and also install xrecovery then you can unlock the bootloader.
For rooting: http://forum.xda-developers.com/showpost.php?p=10881307&postcount=5
Any further queries are welcome,
ynkamat said:
Hey sorry for keeping you waiting. just saw your posts. Dont spam or else you feel feel the heat of moderators. You need to root the phone first and also install xrecovery then you can unlock the bootloader.
For rooting: http://forum.xda-developers.com/showpost.php?p=10881307&postcount=5
Any further queries are welcome,
Click to expand...
Click to collapse
thanks for the advice mate,,,can you tell me the exact rom u used from the list?
I can just see X10_1.0_SE_StockRom_MultiTouch rom in my firmware folder. But any 2.1 generic would do. I wonder why you have issues. I had x10i and you are having x10a. So i hope you flashed x10a rom. Next thing have you enabled USB debugging. Sometimes the antivirus creates problems with adb. So try stopping ur antivirus or else use a different pc.
I hope you are using this tool for unlocking
http://forum.xda-developers.com/showthread.php?t=1256430
ynkamat said:
I can just see X10_1.0_SE_StockRom_MultiTouch rom in my firmware folder. But any 2.1 generic would do. I wonder why you have issues. I had x10i and you are having x10a. So i hope you flashed x10a rom. Next thing have you enabled USB debugging. Sometimes the antivirus creates problems with adb. So try stopping ur antivirus or else use a different pc.
I hope you are using this tool for unlocking
http://forum.xda-developers.com/showthread.php?t=1256430
Click to expand...
Click to collapse
oook...i was not using this tool,,,,i will do that,,hope it works for me,,
ynkamat said:
I can just see X10_1.0_SE_StockRom_MultiTouch rom in my firmware folder. But any 2.1 generic would do. I wonder why you have issues. I had x10i and you are having x10a. So i hope you flashed x10a rom. Next thing have you enabled USB debugging. Sometimes the antivirus creates problems with adb. So try stopping ur antivirus or else use a different pc.
I hope you are using this tool for unlocking
http://forum.xda-developers.com/showthread.php?t=1256430
Click to expand...
Click to collapse
dude,,i used the tool u said to use,,and it was completed successfully,,now how should i proceed further?(just to be on safer side)
OK Congrats. I dont know whether you have flashed a custom kernel after unlocking. (if u see sony ericsson at booting, it means u haven't, but that dosent mean you have a locked bootloader). Now restore/flash a pre rooted ginger bread rom via xrecovery. Then you can flash any Roms here. There are hell lot of updates coming here in android development section.
abhix10 said:
hey dude,,,can u tell me the exact 2.1 rom u flashed from the list given in your link?
Click to expand...
Click to collapse
Any firmware would do the job.
ynkamat said:
OK Congrats. I dont know whether you have flashed a custom kernel after unlocking. (if u see sony ericsson at booting, it means u haven't, but that dosent mean you have a locked bootloader). Now restore/flash a pre rooted ginger bread rom via xrecovery. Then you can flash any Roms here. There are hell lot of updates coming here in android development section.
Click to expand...
Click to collapse
thanks to you dude,,,i unlocked the bootloader,,but after i flashed a pre rooted rom and then flashed vo4b overclocked doomkernel,,,,i got a problem,,,,it just pauses at the new boot logo and the phone doesnt reboot,,,wat should i do?
Did you flash the .71 baseband after you flashed Gingerbread firmware, otherwise you will get an error stating no sim and no imei no. Dont go for overclocking at this stage. Start from normal versions, let your phone be stable then you can go for overclocking.
ynkamat said:
Did you flash the .71 baseband after you flashed Gingerbread firmware, otherwise you will get an error stating no sim and no imei no. Dont go for overclocking at this stage. Start from normal versions, let your phone be stable then you can go for overclocking.
Click to expand...
Click to collapse
naa,,i didnt do that,,,should i repair my phone using sony ericcson pc companion?
after flashing my mini with minicm7 rom and naa kernel my mini cannot recognezi the sim card. i restored custom rom with pc companion, with seus, i made a wipe out but when i open the phone i dont take the message to unlock the sim. what i coud do?
Model Number E10i
Firmware version 2.1-update1
Baseband version M76XX-.....-015
Kernel Version 2.6.29 [email protected]#1
Build Number 2.1.1.A.0.6
does anybody have the 1.6 firmware so i can flash it and see if i can solve the problem???
Got the same issue here. Did u fixed it?
tapxxor said:
after flashing my mini with minicm7 rom and naa kernel my mini cannot recognezi the sim card. i restored custom rom with pc companion, with seus, i made a wipe out but when i open the phone i dont take the message to unlock the sim. what i coud do?
Model Number E10i
Firmware version 2.1-update1
Baseband version M76XX-.....-015
Kernel Version 2.6.29 [email protected]#1
Build Number 2.1.1.A.0.6
does anybody have the 1.6 firmware so i can flash it and see if i can solve the problem???
Click to expand...
Click to collapse
Reason: Probaly due to u have sim unlocked phone by third party tool like omnius or sumthing. (sim unlock n unlock bootloader are two different things )
Solution: Flash your stock rom(if u are already on stock rom fine) then flash the stock kernel ( needed )
Relock your bootloader .u will get your network signal back.
Note: Make sure before u relock bootloader u are on stock kernel n relock it.
Alvar0ck said:
Got the same issue here. Did u fixed it?
Click to expand...
Click to collapse
Sent from my U20i using xda premium
faiyyaz said:
Reason: Probaly due to u have sim unlocked phone by third party tool like omnius or sumthing. (sim unlock n unlock bootloader are two different things )
Solution: Flash your stock rom(if u are already on stock rom fine) then flash the stock kernel ( needed )
Relock your bootloader .u will get your network signal back.
Note: Make sure before u relock bootloader u are on stock kernel n relock it.
Sent from my U20i using xda premium
Click to expand...
Click to collapse
There's no way to do so in the same CM7 ROM which i'm using right now?
Alvar0ck said:
There's no way to do so in the same CM7 ROM which i'm using right now?
Click to expand...
Click to collapse
Mate the basic problem is that u got ur sim unlock by thirf party app. So unlock bootloader is not possible as it will will result to losse radio signal's n if u want to restore to network.flash back stock kernel n relock bootloader.
N wait till blagus or some simunlock tool to include an update for unlock bootloader.
Sent from my U20i using xda premium
Hi,
I have the same problem but I've already reflash the phone and relock the bootloader. I've also restored the phone using SEUS.
I had my phone sim unlock with a program from a web. I read something that unlocking bootloader could make the sim to relock again if it wasn't unlock via IMEI code but I tried anyway (I couldn't resist it).
Now I have no signal but the phone doesn't work as before also. If I try with a sim that is disabled (I'm not using that company anymore) the phone ask me to put a valid sim card but it still works (without signal). If I try a sim that still works (and of the same company the phone was lock for) it just switch on but I can only use the slide bar. The rest of the screen is blue and I have no signal.
I can install other roms and it works fine but without signal also.
Did I broke something? I wanted to buy the code to unlock the sim but maybe is impossible to fully restore the phone now.
Hello
I just want to ask about flashing another custom rom on my phone,
i already got this phone with a custom rom and kernel, and the back cover of my phone had a NTT DOCOMO SO-01B logo..
I am a noob on flashing Sony Ericsson phone
model number: X10i
Adnroid Version: 2.3.3
Baseband Version: 2.1.71
Kernel version: [email protected] #21
Build number: Wolf_Xperia_4.0.4c
and i want to try the rom "X10S"
what i should do first?
screenshot:
s8.postimage.org/oo7q7zz7p/screenshot_000017.png
THANKS!
Make a backup using recovery.Then read the thread of the rom you have chosen.Then you will see the bugs/fixes the rom has.Then if your happy,follow the instructions the developer has posted about kernel/bootloader etc.
Sent from my X10i using xda premium
thanks sir. i do will read the instruction for the flashing instructions, but there are any chances that my phone will got bricked? or just i need to back up rom first?
and i'm a noob here so i cannot post on the thread
You can run into situations that the phone seems bricked-but it aint.You should also bookmark guides on using flashtool,pc companion to save time if your stuck.
Ive had almost all the errors,it sometimes takes hours to get phone and data back.......
Sent from my X10i using xda premium
data lost is not a problem for me, so what do you recommend first to do aside from back up my phone?
You need to install flashtool and understand how to use it.Then you can see about maybe unlocking bootloader/installing kernel and rom.
Ive not looked at the rom thread you want,but some of them threads have 2000 posts......
Sent from my X10i using xda premium
i do know how to follow those steps i've s-offed an htc ang flashed custom rom on it..
i do want to know what is the other compatible or further steps before flashing a custom rom. coz i am afraid messing it up since i already got it with a custom rom and kernel.,
i read some tutorial flashing kernel but i didn't see one for a x10i docomo unit,.
You maybe better wait to see if someone knows about your model of x10i.I think I have seen it listed in pc companion,so there is a difference between that and like my x10i-maybe its software opposed to hardware.
But since its running custom stuff currently-you should be able to put other stuff on.......
Sent from my X10i using xda premium
I've Google on what is the difference with x10i and x10a, it something to do with the 3g signal, x10i uses different bandwidth because it is released in japan and other country..
anywyas, thanks for your help! , i'll just wait for the other help..
You can have a look here and see if theres anything of any use to you
http://forum.xda-developers.com/showthread.php?t=726828
I've tried the X10S on my X10i and it worked fine... at least it didn't brick it... some xda experts believe that this phone is unbrickable... and since you say that u know how to flash roms and firmwares u shouldn't worry...
thanks to your response, i am afraid to flash because it might not be compatible with the kernel? did you changed your kernel first? what kernel are you using?
treboj422 said:
I've Google on what is the difference with x10i and x10a, it something to do with the 3g signal, x10i uses different bandwidth because it is released in japan and other country..
anywyas, thanks for your help! , i'll just wait for the other help..
Click to expand...
Click to collapse
Well, Docomo is just the Japanese market version of X10, but I think it is more like an X10a as it doesn't have the 1700 MHz band of the X10i. And you already have Wolfs v4 which is a pretty old ROM, so just head on over to Champs thread http://forum.xda-developers.com/showthread.php?t=1516960 and bring your X10 into 2012. Maybe start with v7, and enjoy. There ara also some neat kernels here. http://forum.xda-developers.com/showthread.php?t=1564056 . Just look for the one for "Stock"
tal333
Phone: Sony Ericsson Xperia X10i @1.19GHz- White
Android version: 2.3.7
Kernel: 2.6.29-FXP#113-Champkernel-FullOC
Radio: 2.1.71
Recovery: FreeXperiaCWM- v5.0.2.7
Rom: FXP#115-CyanogenMod-7.2.0-RC1-es209ra-KANG
Theme: Honeycomb3D-3Dicons by BKMO
thanks!
can you provide me a little quick guide on what did you do on your x10?
i mean does it require first to change my kernel? or x10s rom will work in my current kernel?
i admit it is more tricky to work with Sony Ericsson phones than htc
======
And i do got a little problem
i identify my info from s1tool, and my bootloader is locked " R "..
and my simlock is not recognized, my be it is unlocked by other software or method..
the only way to unlock my bootloader is to simunlock buy setool? weew!
my one last question is can i flash x10s rom to my phone using my current kernel?
Can anyone can answer me?
thanks in advance!
treboj422 said:
thanks!
can you provide me a little quick guide on what did you do on your x10?
i mean does it require first to change my kernel? or x10s rom will work in my current kernel?
i admit it is more tricky to work with Sony Ericsson phones than htc
======
And i do got a little problem
i identify my info from s1tool, and my bootloader is locked " R "..
and my simlock is not recognized, my be it is unlocked by other software or method..
the only way to unlock my bootloader is to simunlock buy setool? weew!
my one last question is can i flash x10s rom to my phone using my current kernel?
Can anyone can answer me?
thanks in advance!
Click to expand...
Click to collapse
1: root device
2: install recovery
3: unlock bootloader (optional of course)
4: flash a kernel in xrecovery (locked bl) or thru flashtool (unlocked bl)
5: flash rom of choice
Thats the best way to do it if u just got phone (4 & 5 can be swapped round) if u followed order above but turned on phone after 4 yet before 5 u may need to wipe dalvik cache. also dont confuse bl unlock with sim unlock bl unlock will NOT mean u can put any sim card in the device
Sent from my X10i using XDA
laneyofdeath said:
1: root device
2: install recovery
3: unlock bootloader (optional of course)
4: flash a kernel in xrecovery (locked bl) or thru flashtool (unlocked bl)
5: flash rom of choice
Thats the best way to do it if u just got phone (4 & 5 can be swapped round) if u followed order above but turned on phone after 4 yet before 5 u may need to wipe dalvik cache. also dont confuse bl unlock with sim unlock bl unlock will NOT mean u can put any sim card in the device
Sent from my X10i using XDA
Click to expand...
Click to collapse
my phone is already rooted, and running on a custom rom, i want to know from other user if my current kernel will do on x10s rom? just back up and flash te x10s rom???
Yes stock kernel would work
Sent from my X10i using XDA
Kernel version: [email protected] #21
seems like it's not running on a stock kernel???
treboj422 said:
Kernel version: [email protected] #21
seems like it's not running on a stock kernel???
Click to expand...
Click to collapse
I just went from Wolfbreak Xperia 6s to X10S with no kernel changes.
If you like Wolfs rom you will love Champs X10s
Sent by my X10S on DoomKerneL 6
Im no expert but it seems that the x10 IS unbrickable.
Last week after too many beers i flashed the wrong kernel/rom combo and lost access to xrecovery. Phone was stuck on start up logo.
Flashtool (I love flashtool) couldnt 'see' my phone - Panic set in
After lots of xda thread searching and reading i found the wotanserver flasher...
http://www.wotanserver.com/en/account/login
It solved my temporary brick problem - although now ive learnt more about flashtool i believe it is capable of same thing
Also here is a great video for flashing etc,
http://www.youtube.com/watch?v=HmX-IYNYqL8
And here is a guide for flashtool...
http://forum.xda-developers.com/showthread.php?t=928343
Dont be afraid of 'bricking' your x10
I have this phone from a friend that doesnt have baseband, restart it self and works like a turtle. I think that he tried to flash baseband from ST25a and bricked up.
I already flash it with an ST25i TFT with no success. Any idea?
If he simpy made a mistake in baseband, flashing a stock FTF with the correct baseband would fix the issue Try flashing a custom rom and see if there's any difference
Custom ROM includes baseband? I think that only include system or I'm wrong?
Only FTFs contain Baseband. But a mistaken baseband shouldnt cause lagging rom. Odds are something else is the issue. Try with a custom rom and see if lags still persist.. That might help you out
Cheers
I will try but lagging is my less important problem right now, I need to fix baseband first.
Thx.
Finnaly I solved my problem using Update Service software from Sony.
Why I did:
1.- I tried first with Update Service with no success
2.- I downloaded official ICS FTF for ST25i from this topic and flashed it using Flashtool with no success
3.- I tried again using Update Service and worked. Baseband restored
Thx for your help Min3r
Good to hear that bro :thumbup:
Sent from my Xperia U using xda premium
champ4 said:
Finnaly I solved my problem using Update Service software from Sony.
Why I did:
1.- I tried first with Update Service with no success
2.- I downloaded official ICS FTF for ST25i from this topic and flashed it using Flashtool with no success
3.- I tried again using Update Service and worked. Baseband restored
Thx for your help Min3r
Click to expand...
Click to collapse
how can you know if your baseband is lost. i think i have the same problem which is cant switch to wcdma, it always turn to be emergency call only.
Hi i was recently using the phone with 2.3 stock rom .. i checked this forum and found spl gaming rom . i just wanted to flash that rom . so i rooted it and unlocked bootloader and installed xrecovery . after flashing the rom when the phone booted it showed " insert network unlock code " .. My phone was not locked before flashing the rom .. i thought to flash stock 2.3 again but when i flashed it , it just says " insert simcard and restart "
Help me plz . i wan't to use my sim on my phone .. i searched it on google and got no solution .
I'll be very thankful if you can help .
Ok the problem is solved now . i unrooted my phone and re-locked the bootloader . Now everything is fine . Sim is working again . But i want to flash custom roms . If i unlock the bootloader again then it will ask for network code again .
What can i do so that i can flash customs roms and also use my sim ?
Plz help me
try FeraLab ROM and Kernel, http://feralab.org/x10-gb-rom.html
Try to unlock bootloader and if same error persists repair using pc companion
Sent from my X10i using XDA Free mobile app
Bigkiler5 said:
Try to unlock bootloader and if same error persists repair using pc companion
Sent from my X10i using XDA Free mobile app
Click to expand...
Click to collapse
I've tried to unlock using flashtool but it says " bootloader can't be unlocked officially "
Can someone tell me if there is a recovery for locked bootloader ?
Ok guys Problem solved . i just re-rooted it and then unlocked the bootloader using flashtool . Then flashed xrecovery and flashed ferlab's rom .. Everything is fine now . Sim in working while the bootloader is unlocked .
Thanks for the support guys