Hi i was recently using the phone with 2.3 stock rom .. i checked this forum and found spl gaming rom . i just wanted to flash that rom . so i rooted it and unlocked bootloader and installed xrecovery . after flashing the rom when the phone booted it showed " insert network unlock code " .. My phone was not locked before flashing the rom .. i thought to flash stock 2.3 again but when i flashed it , it just says " insert simcard and restart "
Help me plz . i wan't to use my sim on my phone .. i searched it on google and got no solution .
I'll be very thankful if you can help .
Ok the problem is solved now . i unrooted my phone and re-locked the bootloader . Now everything is fine . Sim is working again . But i want to flash custom roms . If i unlock the bootloader again then it will ask for network code again .
What can i do so that i can flash customs roms and also use my sim ?
Plz help me
try FeraLab ROM and Kernel, http://feralab.org/x10-gb-rom.html
Try to unlock bootloader and if same error persists repair using pc companion
Sent from my X10i using XDA Free mobile app
Bigkiler5 said:
Try to unlock bootloader and if same error persists repair using pc companion
Sent from my X10i using XDA Free mobile app
Click to expand...
Click to collapse
I've tried to unlock using flashtool but it says " bootloader can't be unlocked officially "
Can someone tell me if there is a recovery for locked bootloader ?
Ok guys Problem solved . i just re-rooted it and then unlocked the bootloader using flashtool . Then flashed xrecovery and flashed ferlab's rom .. Everything is fine now . Sim in working while the bootloader is unlocked .
Thanks for the support guys
Related
Hello I am French I have a problem after the installation of the kernel and the ROM, I do not have a network anymore and the ROM does not recognize my flea(chip)
You can help me thank you
http://forum.xda-developers.com/showthread.php?t=1304752
Have u unlocked your bootloader?
Sent from my X10i using XDA App
Yes I have unlock bootloader I believe I installed the ROM and I have no network...
plz help ..
Do you mean that you have no mobile data ? Or actually no service.
whats is ur baseband version ???
no network
i have no service .. my baseband is 2.1.71
may be the unlock does not work
Is your sim unlocked?
Sent from my X10i using XDA App
I don't know how to tell?
I resolved my problem after installing the ROM my SIM card was not detected and I had no network I went to see the setting I did not see the baseband version of my writing there had "unknown baseband" I reflash my baseband 01.02.71 with Flashtool with "X10i_2.1.71_ARO.ftf" and then I reflash the kernel "X10_a1Kernel_v4For.a1exanders.M1U1.v11.and.later.ftf" and my SIM and again, and I detected the network!
Sorry I'm French
Good to hear u fixed it pal
Sent from my X10i using XDA App
acerulz said:
whats is ur baseband version ???
Click to expand...
Click to collapse
Hi. plz help me. i have the same problem except it shows my baseband 2.1.71. still i dont have no network. X10i. I rooted the phone. unlocked the bootlaoder. then tried to install CM7 through cwmrecovery. the firmware dint flash.. after i turned on my phone since then iam having no network. please insert simcard and turn on the phone.
Omarjivraj said:
Hi. plz help me. i have the same problem except it shows my baseband 2.1.71. still i dont have no network. X10i. I rooted the phone. unlocked the bootlaoder. then tried to install CM7 through cwmrecovery. the firmware dint flash.. after i turned on my phone since then iam having no network. please insert simcard and turn on the phone.
Click to expand...
Click to collapse
is your phone in contract or simunlocked?
I have the same problem. i played with my phone. The phone wasn't locked to a specific operator( i yhink it was unlocked - is a SH Phone). The ideea is that i played with s1tool and everythinh was ok, i flashed the phone, i installed a new room (m&m, but with another kernel, nmot the one recomanded), after that the phone did not boot, i reflashed the phone with diffrent kernels(my mistake) and after that the s1tool told me "NOT RECOGNIZED SIMLOCK CERTIFICATE". I installed a rom for locked bootloader with doom kernel, but now my phone doesen't see my network anymore -please insert sin card and restart. AAA.. before that i used SEUD and installed the default room - my phone was capable to see the available networks but it keeps told me - please insert sim card and restart. Now i have the MUI rom with doom kernel (both for looked bootloader - the version with the xrecovery installer), and my phone doesn't see the networks anymore.
Could you help me pls!
Thanks.
i have the same problem with my mini. in the "about phone" section i see
Model Number E10i
Firmware version 2.1-update1
Baseband version M76XX-.....-015
Kernel Version 2.6.29 [email protected]#1
Build Number 2.1.1.A.0.6
what should i flash?
i have the seem problem too i think we need to flash other kernel
tapxxor said:
i have the same problem with my mini. in the "about phone" section i see
Model Number E10i
Firmware version 2.1-update1
Baseband version M76XX-.....-015
Kernel Version 2.6.29 [email protected]#1
Build Number 2.1.1.A.0.6
what should i flash?
Click to expand...
Click to collapse
U need to use seus or pc companion to update
Sent from my X10i using XDA
Guys,
You have some mistakes:
First unlocking bootloader that somewhere harm your device.
Second flashing another kernel instead of recommended one.
Third you don't pay attention enough to installing rom's procedures.
It is important to use the specific kernels that rom maker tells us.
Good luck all..
Sent from my X10 using xda premium
I used SEUS and put the stock rom ... the phone still not recognize my card, but it can see the available networks. I have one question. If i use SEUS when i install the rom it install the specific kernel or the phone keep the one that i installed?
It installs the specific kernel of stock rom..
Sent from my X10 using xda premium
Ok. Somehow i fixed my problem. That's what i've done:
I used SEUS and i installed the stock rom. Then I installed flashtool (try to do a fresh install of flashtool if you allready have it installed) i installed the busybox and then i used the bootloader unlock from plugins menu. After i unlocked my bootloader the phoen saw my network immediatley. I supose that everyone else that have this problem have the bootloader locked or they tried to unlock the bootloader and didn's succeed.
I hope this will help someone. GoodLuck!
st15i touch screen is not responding at all after hybrom custom rom installation...guys guide me what should i do to make this master piece workable..thanx alot..plz help..i m very much worried..i v unlocked bootloader,custom kernel installed but now after turning on its touch is not working..even i cant unlock the slider after turning it on and cant turn it off...i v to pull my battery out to turn off my mobile...please help guys.plz
ffaaiissaall said:
st15i touch screen is not responding at all after hybrom custom rom installation...guys guide me what should i do to make this master piece workable..thanx alot..plz help..i m very much worried..
Click to expand...
Click to collapse
which version of hybrom did you install..and of which device..try to install hybrom v13 of st15i again or just flash stock rom...
Dear akshay i v flashed to .377 , .42 , .62. Moreover i had updated it using pc companion to .62 after re locking my boot loader but all in vain.now i m on .62 firmware and no root and cmw.how can i install hybrom v13.kindly guide me.i m a little bit noob...
did you unlock your bootloader..
Yes off course i had unlocked boot loader at that time when i tried to install hybrom rom but then i relocked boot loader and updated via pc companion to stock .62 ... now how can i install cmw and root my phone even i cant unlock its slider to enter into phone firmware..
plz help guys
ffaaiissaall said:
plz help guys
Click to expand...
Click to collapse
sorry for late reply..i was busy do you know how to install custom kernel..to install custom kernel you required bootloader unlock..this is the only way to get cmw for you..if you have lock bootlader and having in warrenty then go to service center..they will solve your problem..
Thanx alot akshay for your support and help...my touch is working now...i v done this method....first i unlocked boot loader,then flashed .62 stock using flashtool,then b4 starting device i flashed rage kernel,then i installed hybromv10 for sk17i in device.touch started working but not fully functional,then i flashed back .62 stock using flashtool.now i m on stock.62 firmware with stock kernel with unlocked BL
bro please share .62 stock bcz i cant download with multiupload ,please my touch screen working but weird im using hybrom v14 please share what i need and the step by step thanksss
Brother i m out if town on my clinic.when i reach my laptop tonight,i,ll surely help u and upload that firmware .62 ASAP.
42me said:
bro please share .62 stock bcz i cant download with multiupload ,please my touch screen working but weird im using hybrom v14 please share what i need and the step by step thanksss
Click to expand...
Click to collapse
Here is another solution if u could try today.ist relock ur BL using flash tool by relock xperia.tft( i cant give u a link coz i m posting now using my xperia mini;-).u can google it or search in xda forums) then update ur mini using PC Companion or SEUS.tell me if there is any problem.good luck.moreover hybromv14 is full of bugs.v13 is awesome.u can use it in daily routine.
42me said:
bro please share .62 stock bcz i cant download with multiupload ,please my touch screen working but weird im using hybrom v14 please share what i need and the step by step thanksss
Click to expand...
Click to collapse
Another alternate solution for u.ist relock ur BL using flashtool by relock xperia.tft(i cant give u a link coz i m posting reply using my mini.just google it or seaech in xda forums).then update via PC companio or SEUS to .62 firmware.tell me if this happened to solve ur problem.GOOD LUCK BRO.
Relocking bootloader is not needed to stock ROM.
Also, you can use WotanServer to install stock ROM and kernel back.
thankss bro about 2 days i work very hard to solved this problem maybe u cant help me step by step thank for quick respond from u....
---------- Post added at 07:34 PM ---------- Previous post was at 07:28 PM ----------
i try it this afternoon i lock my bootlooder and i use update service to update but update service say my xperia have a new update ......
If you install newest firmware, 4.0.2.A.0.62(.69 in German), with Flashtool or WotanServer, then you can keep bootloader unlocked, incase you want to install custom ROM/Kernel some other time.
If you want to make OTA(Over the Air) update, then lock your bootloader, else you will brick your phone, that can be fixed, but better don't.
I can't understand, what do you want to do exactly, else I could write guide for you.
ffaaiissaall said:
Another alternate solution for u.ist relock ur BL using flashtool by relock xperia.tft(i cant give u a link coz i m posting reply using my mini.just google it or seaech in xda forums).then update via PC companio or SEUS to .62 firmware.tell me if this happened to solve ur problem.GOOD LUCK BRO.
Click to expand...
Click to collapse
Wotanserver firmware updating and SEUS,PC companion firmware updating requires BL locked.flash by flastool doesent require BL locked.it can b flashed using flashtool witj unlocked BL
now i try with wotan server thanksss for helping ...i will report in next pos thanksss
bro i have done flash with wotwn server but my touch screen still not working.....
ffaaiissaall said:
Wotanserver firmware updating and SEUS,PC companion firmware updating requires BL locked.flash by flastool doesent require BL locked.it can b flashed using flashtool witj unlocked BL
Click to expand...
Click to collapse
WotanServer does not require locked BL.
Sent from my WT19i using xda premium
yes wotan server dont have to lock bootloader but after i flash with wotan server my touch screen not working [button vol,home working] now what i must to do it's another solution to me ......
after flashing my mini with minicm7 rom and naa kernel my mini cannot recognezi the sim card. i restored custom rom with pc companion, with seus, i made a wipe out but when i open the phone i dont take the message to unlock the sim. what i coud do?
Model Number E10i
Firmware version 2.1-update1
Baseband version M76XX-.....-015
Kernel Version 2.6.29 [email protected]#1
Build Number 2.1.1.A.0.6
does anybody have the 1.6 firmware so i can flash it and see if i can solve the problem???
Got the same issue here. Did u fixed it?
tapxxor said:
after flashing my mini with minicm7 rom and naa kernel my mini cannot recognezi the sim card. i restored custom rom with pc companion, with seus, i made a wipe out but when i open the phone i dont take the message to unlock the sim. what i coud do?
Model Number E10i
Firmware version 2.1-update1
Baseband version M76XX-.....-015
Kernel Version 2.6.29 [email protected]#1
Build Number 2.1.1.A.0.6
does anybody have the 1.6 firmware so i can flash it and see if i can solve the problem???
Click to expand...
Click to collapse
Reason: Probaly due to u have sim unlocked phone by third party tool like omnius or sumthing. (sim unlock n unlock bootloader are two different things )
Solution: Flash your stock rom(if u are already on stock rom fine) then flash the stock kernel ( needed )
Relock your bootloader .u will get your network signal back.
Note: Make sure before u relock bootloader u are on stock kernel n relock it.
Alvar0ck said:
Got the same issue here. Did u fixed it?
Click to expand...
Click to collapse
Sent from my U20i using xda premium
faiyyaz said:
Reason: Probaly due to u have sim unlocked phone by third party tool like omnius or sumthing. (sim unlock n unlock bootloader are two different things )
Solution: Flash your stock rom(if u are already on stock rom fine) then flash the stock kernel ( needed )
Relock your bootloader .u will get your network signal back.
Note: Make sure before u relock bootloader u are on stock kernel n relock it.
Sent from my U20i using xda premium
Click to expand...
Click to collapse
There's no way to do so in the same CM7 ROM which i'm using right now?
Alvar0ck said:
There's no way to do so in the same CM7 ROM which i'm using right now?
Click to expand...
Click to collapse
Mate the basic problem is that u got ur sim unlock by thirf party app. So unlock bootloader is not possible as it will will result to losse radio signal's n if u want to restore to network.flash back stock kernel n relock bootloader.
N wait till blagus or some simunlock tool to include an update for unlock bootloader.
Sent from my U20i using xda premium
Hi,
I have the same problem but I've already reflash the phone and relock the bootloader. I've also restored the phone using SEUS.
I had my phone sim unlock with a program from a web. I read something that unlocking bootloader could make the sim to relock again if it wasn't unlock via IMEI code but I tried anyway (I couldn't resist it).
Now I have no signal but the phone doesn't work as before also. If I try with a sim that is disabled (I'm not using that company anymore) the phone ask me to put a valid sim card but it still works (without signal). If I try a sim that still works (and of the same company the phone was lock for) it just switch on but I can only use the slide bar. The rest of the screen is blue and I have no signal.
I can install other roms and it works fine but without signal also.
Did I broke something? I wanted to buy the code to unlock the sim but maybe is impossible to fully restore the phone now.
hi
at first sorry for my bad english
i had a problem with my lww
after unlock bl the back key doesn`t work well
then lock it but problem doesn`t fix
please help me
Which way did you unlock the bootloader? What else did you do?
Sent from my Xperia Live using xda premium
by sony method
please.....
Try reinstalling stock firmware back with Flashtool.
http://www.theandroidsoul.com/tutorial-how-to-flash-a-firmware-using-flashtool-on-xperia-arc/ The process is the same for all phones from Xperia line . If you need more help , send a message . Hope we can help .
P.S. If you are not clear how to flash ROMs , or use Flashtool even after going throug this tutorial , again , just ask
i try flash rom before, back key fix
but i want to flash custom rom and kernel
thanks for help
Tell me first is your phones bootloader unlocked now or not ? If it is , I can explain to you how to flash stock ( original ) firmware to your phone - it might help you with your problem .
crazy_4_and1 said:
Tell me first is your phones bootloader unlocked now or not ? If it is , I can explain to you how to flash stock ( original ) firmware to your phone - it might help you with your problem .
Click to expand...
Click to collapse
Stock firmware installation doesn't require unlocked bootloader, can be locked also.
Oh , yea , you are right ... I just don't know if we could explain to him how to flash it ?!
I have a problem using this rom , after i installed it ( wiped everything ) i got a network lock message after boot .. went back to resurrection remix ( latest version and latest syiah kernel ) but i still got network locked message ..i searched and saw the Galaxy S Unlocker which is free , succesfully unlocked the phone .. then i made another full wipe , reinstalled Omega v16.2 but when i try to use the unlocker its simply not working .. is there anything i can do ? i really want this rom becouse its so good optimized and is looking so damn good .. thank you very much .
Isn't it a sim unlock code not network some Sims have a code in them from the network I have that on my partner's e5 I had problems but took it to shop to unlock took 3 day worked but I found that the apn is locked by sim 2 code could this be the problem , just a idea could be sim code not network unlock code so could be Rom related not network
Sent from my HTC Desire HD using xda app-developers app
hmm .. ill try to manualy add the apn .. oh **** man it got locked again after i restarted the phone ._. .. even with my old rom that i used for few weeks.. i hope this is not the end of my phone .. **** .. another question : my internal memory is full even if i wipe entire phone .. can i delete everything from internal memory via usb cable ? will the phone create the files needed again ? thank you !
yeah so its not rom related -.-''.. i think my phone is ****ed up now .. fresh installed resurrectino remix and still dont have signal and i get SIM network unlock PIN ..
what should i do ? help me guys cuz im starting to panic ..
no one knows what can i do ? now on resurrection remix 4.1.2 i can unlock via galaxy s unlock but i have to do it after every phone restart.. thank you
VDubG said:
no one knows what can i do ? now on resurrection remix 4.1.2 i can unlock via galaxy s unlock but i have to do it after every phone restart.. thank you
Click to expand...
Click to collapse
flash the latest siyah or dorimanx kernel and see for the issue
i will try to flash the latest syiah kernel .. but if is still not working .. if i go to an Orange shop and my phone is second hand .. i dont know anymore where the seller is .. will they unlock it ? ._.'
VDubG said:
i will try to flash the latest syiah kernel .. but if is still not working .. if i go to an Orange shop and my phone is second hand .. i dont know anymore where the seller is .. will they unlock it ? ._.'
Click to expand...
Click to collapse
First try the kernel option ma8, if it doesnt help then u can approach the Orange people with the issue
ok , cool thanks man
Problem got SOLVED ! im writing this so anyone can see it .. it seems they put a protection on newer versions so everytime you unlock it via galaxy s unlock after restart you need to unlock it again. My problem got solved by flashing stock 4.0.3 from samobile and then flash syiah kernel . I unlocked it , restarted it few times and is still unlocked. thank you everyone !
Kernel flash problem
Hi
When I am trying to flash siyah kernel it gives me error (status 7)
Any idea what to do?I
I was just traying install MIUI but it come up with same error (status 7) instaltion abrted
stanmar said:
Hi
When I am trying to flash siyah kernel it gives me error (status 7)
Any idea what to do?I
I was just traying install MIUI but it come up with same error (status 7) instaltion abrted
Click to expand...
Click to collapse
And are you using philz kernel? If you are, it has a broken recovery. Flash Siyah kernel from www.gokhanmoral.com, then flash the ROM you want.
Sent from my GT-I9100 using Tapatalk 2