Yesterday I helped my gf to root her phone. Because she would like to keep her stock ROM and not wanting to use stock ROM, I used CF-Root (http://forum.xda-developers.com/showthread.php?t=1158197) to root the phone.
After that, I install DT A2SD (http://forum.xda-developers.com/showthread.php?t=715940) and run it on stock rom. I moved dalvik cache and data to sd card. After rebooting, the phone slows down alot. Media scanning took few minutes and the phone performs laggy. So, I thought moving dalvik cache to sd card is not a good idea, i moved it back to internal. The result is still the same. I moved back the data too to internal. And still, laggy and media scanning took very long.
Oh, I partitioned the sd card with CWM. 1gb for partition
Can anyone guide me?
TL; DR ver.
1) Gf wants to keep stock ROM and move data to SD card since apps are taking up spaces
2) So, CF-rooted it and installed dt a2sd, moved dalvik n data to sd.
3) Phone performance quite slow and took long time for sd card finish scanning.
4) Moved back dalvik n data to internal, doesnt help at all..
DXKPB 2.3.4
There's a Tweak manager included from Cf-root, but I dont know whether I should meddle with it.
Is there anyway to remove the lag?
the class rating of your sd card is too low ie too slow.
what is the speed of the sdcard? higher class means higher read/write speed eg class 6 is faster than class 4
btw install and use this to completely disable media scanning when boot and when unmount device from pc. reopen the app when u wanna trigger media scan. that app helps me alot by making boot much, much faster because media scanning is disable
Her sd card class : 4
Sometimes running some apps or playing music, the loading time is long. =\
Funny that Im running on cm7 kang + dt a2sd with sd card class only 2 and I dont experience similar problem.
Hmmm anything could be possible then e.g. too many apps attempting to startup together during bootup. One can only tell by using an app like Autostarts.
I have tried using an sd-ext partition when i was on the rfs file system and things weren't slow to make me frustrated but certainly no complaints appreciating the speed increase after changing the file system to ext4 overall.
I did a quick search and found this thread.
http://forum.xda-developers.com/showthread.php?t=1344542
Saw your link there to convert rfs file sys to ext4. But before that, how do I check my stock rom is rfs type? Just wanna take precaution not to brick the phone..
if its stock, its sure is rfs.
WishFinder` said:
I did a quick search and found this thread.
http://forum.xda-developers.com/showthread.php?t=1344542
Saw your link there to convert rfs file sys to ext4. But before that, how do I check my stock rom is rfs type? Just wanna take precaution not to brick the phone..
Click to expand...
Click to collapse
i used ext4manager from ketut in his CF Root thread. Since you are on CF Root kernel, it will show you whether you are on rfs or ext4. this is actually a pointless exercise cos as anonymous pointed out, it is almost confirmed for sure that you are on rfs. Anyway this ext4manager allow you to do an one click conversion to ext4 file system too. i think that should interest you even more.
ok, so i have installed ketut's modified app and tried that but it seems like ext4 manager is showing no ext4 partitions found. Then I tried CF's original ext4 manager app. This time, it shows no ext4 part found but the "convert rfs to ext4" is clickable. after clicking it, it rebooted into CWM and failed to convert it. Everything happened too fast on CWM screen. I saw "installation aborted".
edit: it also shows "CF kernel not found"
edit 2: I reinstalled ketut's app. and this time it works. Successfully converted to ext4. But it does not improve the performance. Still very slow and laggy when running apps.
why dont you install autostarts and expand event called after startup to see how many apps are jostling to startup?
happily1986 said:
why dont you install autostarts and expand event called after startup to see how many apps are jostling to startup?
Click to expand...
Click to collapse
well because I dont experience such similar problem before rooting and installing dt a2sd. If there are 20 apps jostling to start up without problem before, I wonder what's the prob that caused the lag and slow prob after root and a2sd since they are the same 20 apps earlier
Disabled some apps. Prob still persists.
I think sd partition via CWM is buggy. Faced similar prob. I'm gonna try format the sd card and repartition it via Minitool
ok for me i did my partition not via CWM. I am going to hazard a guess and say that you created an ext3 sd-ext partition in CWM. As far as i know, CWM makes ext3 partitions.
try using mini tools and inform us of your progress.
Okay. So I partitioned 1st as FAT32 and 2nd as ext4. Both also Primary. Now ended up bootlooping. -.- gah. dont know what's wrong with it.
edit: wth.. The phone auto switch back on even I off it via CWM.
WishFinder` said:
Okay. So I partitioned 1st as FAT32 and 2nd as ext4. Both also Primary. Now ended up bootlooping. -.- gah. dont know what's wrong with it.
edit: wth.. The phone auto switch back on even I off it via CWM.
Click to expand...
Click to collapse
If it doesn't work , try partitioning using CWM .
For that power off in CWM , it's bugged
Sent from my GT-S5830 using XDA App
I already partitioned that at first. I think it's not compatible and makes things slow?
Hi! guys i decided to do an ext 4 with mini tools and when i hit apply it shut s down my LT and started to do the partitioning, when it was done my F:\ disappeared now i m getting dreaded code 10 error in my device manager and the worst part was when i inserted the sd into the ph it could'nt read the card luckily i could get CWM to reformat and partition as it was a new 16gig. I had to reinstall my rom again and had it sent via BT to the phone so i could flash and i had to do it twice as the rom i was using had a flash over update. Right now i m still figuring how to get over the code 10, tried disabling,uninstalling,update software drivers u name it. Right now i m waiting for someone to sent me an adaptor could be it is corrupted as well. sigh!!
If your sdcard is like this , use Gparted to rewrite the partition table
Sent from my GT-S5830 using XDA App
Related
Hi all i recently got the tmobile g2 touch and i've rooted and installed modaco 2.2 core rom. i've even downloaded apps2sd2 nd have it installed yet when i try to create a partiotion thru it adjusting the slider to about 300mb it goes done and says reboot yet the reboot button is unresponsive so after rebooting agen myself it does the same thing again. Can ne1 tell me what im doin or if i have missed anything??
Thanks in advance.
p.s i only gt 23mb of phone storage left so need this to work thanx
fezy said:
Can ne1 tell me what im doin or if i have missed anything??
Click to expand...
Click to collapse
Yeah, you missed the part of the MoDaCo ROM release notes that tells you that A2SD is installed as part of the ROM.
yeh but i dnt get that option when i boot in the recovery screen thats y i downloaded app2sd
fezy said:
yeh but i dnt get that option when i boot in the recovery screen thats y i downloaded app2sd
Click to expand...
Click to collapse
That's 'cos it isn't an option - you have to repartition your card and then A2SD (built into MCR2.2) moves your apps when it detects the ext3 partition.
You need to partition your SD card using computer, the phone itself can only 'format' the card which is no good. As per http://code.google.com/p/android-roms/wiki/A2SD:
The SDcard will need two partitions, the first Fat / Fat32 & the second Ext2 For the Ext2 partition I wouldn't go higher than 1.5GB cuz you may run into some issues. I was staying around the 500MB / 750MB area & it was working nice. As all the guides I've read state not to exceed the 1.5GB Marker.
Click to expand...
Click to collapse
Although a lot of guides say to use Ext3, Ext2 works fine for me. Remember, only newly (re)installed apps will be put onto the SD card- the old ones stay on the phone's own memory.
SquiffSquiff said:
Remember, only newly (re)installed apps will be put onto the SD card- the old ones stay on the phone's own memory.
Click to expand...
Click to collapse
Incorrect if using MCR2.x; preinstalled apps are also moved.
Only if moving from an earlier Modaco ROM, everyone else has to wipe first. If Fezy had not partitioned his card first then his apps would be installed to internal memory and I don't think that partitioning the card subsequently will cause those apps to be moved to it.
Hi thanks for all replies your assistant is much appreciated. As i'm new to android (coming from symbian) I was doing so much research i ended up getting confused with all the stuff i saw. But just the day before yesterday actually realised what you just said. I had decided to manually create a partition on computer and did it up to ext 3 etc but thought it didnt work because again i tried to use da apps2sd application to move the apps ( i know "what a noob") and hadn't realised that the applications had alrdy transferred (i only realsied later when i saw 93mb of free phonestorage space) so i ended up doing it all again and as u can gess i lost all my applications lolz, but i had a backup created beforehand so it worked ou .
Thanks again for the help shluggity and squiffsquiff really appreciate it guys.
p.s all the preinstalled apps got moved first time hence me losing all the apps when i tried it again.
Hi,
I'm getting low on space message on my hero running VillainRom 6.1. Tried rebooting, still there. I've only tried to install one or 2 apps with the message there, so not sure if thats actually been affected.
settings-->sdcard & phone storage-->internal storage shows 14.83mb
quick system info shows:
sd card storage free 2.14gb
a2sd storage 249mb free (total 457mb)
system cache 129mb free
memory 37.35mb free
there doesn't seem to be any more processes running than usual - only around 3-4.
I do have quite a lot of apps, over 100, probably closer to 200, I havent counted.
btw thanks to everyone on this site, I'm new to flashing roms but having fun learning, and my phones definitely got a new lease of life.
use the apps2sd checker to make sure its working. If it is id say increase your partition from 512 to more
Just because the app is installed on the sd card (assuming its working properly) doesn't mean the davilk cache for the app has moved. unless you move this as well (which isn't really recommended) each time you install an app system memory will still go down a little.
Lennyuk said:
Just because the app is installed on the sd card (assuming its working properly) doesn't mean the davilk cache for the app has moved. unless you move this as well (which isn't really recommended) each time you install an app system memory will still go down a little.
Click to expand...
Click to collapse
http://4943922026776299669-a-180274...lcSrZUn2-7KkHiRo-ew0R2SEebAQ==&attredirects=0
u need this which is an update. copy this file into the root of the memory card and through the recovery image install it from "zip file from sdcard"
after that restart the phone and check your memory is should be 120mb
Indy_Hero said:
use the apps2sd checker to make sure its working. If it is id say increase your partition from 512 to more
Click to expand...
Click to collapse
thanks for the suggestion
a2sd check script says its working fine, also checked via adb shell.
This is what I then did to the partition size:
I copied SD card contents (both partitions) into ubuntu.
then I put SD back into phone and repartitioned using 1gb for ext2
then I copied back SD card contents from ubuntu.
I assumed this would work, but when I booted I was getting FC all the time. Bart backup sorted it out but I am still left wondering why this method of increasing partition size didnt work??
In any case quick system info shows a2sd has more space, but still got low space message.
qasi said:
...
u need this which is an update. copy this file into the root of the memory card and through the recovery image install it from "zip file from sdcard"
after that restart the phone and check your memory is should be 120mb
Click to expand...
Click to collapse
seems to have solved the problem!! thanks alot mate.
would you by any chance out of interest know why copying ext2 contents from sdcard as outlined above didnt work? - may have some future relevance if changing/upgrading roms.
Thanks again
neuro_99 said:
thanks for the suggestion
a2sd check script says its working fine, also checked via adb shell.
This is what I then did to the partition size:
I copied SD card contents (both partitions) into ubuntu.
then I put SD back into phone and repartitioned using 1gb for ext2
then I copied back SD card contents from ubuntu.
I assumed this would work, but when I booted I was getting FC all the time. Bart backup sorted it out but I am still left wondering why this method of increasing partition size didnt work??
In any case quick system info shows a2sd has more space, but still got low space message.
seems to have solved the problem!! thanks alot mate.
would you by any chance out of interest know why copying ext2 contents from sdcard as outlined above didnt work? - may have some future relevance if changing/upgrading roms.
Thanks again
Click to expand...
Click to collapse
this is because the ramon recovery image had been linked with ext2 with a 512mb partition and u selected 1gb. im not quite sure about that.
chnagin rom is quite simple beucase you have to is
1.backup using nandroid
2.make sure you wipe everything. (also battery and rotating settings)
3. Re partition your sdcard to hold 1 ext2 partition and last partition should be the rest in fat32
4. Flash the rom you want through "zip file from sd card"
5. Reboot.
im a newb so i dont have much knowledge but patching up problems that i had, so that i can help others.
it can be pain especailly rooting!!!
So thats how you would flash a rom, but what if you wanted to keep your a2sd apps? So you dont have to install them all over again in the new rom when you wiped everything.
I think I read somewhere that it should be possible to leave the contents of ext2 as it is, and that should carry forward to the next rom, but I havent been able to test it myself yet.
Hi,
I am new here and did my best searching but couldn;t find a conclusive answer so i just need some suggestions about a way forward.
So far using Froyo's move to SD implementation I have managed to gain some space on the phone for more apps but i am still running out. I also have to use the slow Apps 2 SD application.
So my problem is I want more space for apps. Using adb, setting the install location to SD card helps provide some more but i have hit that limit too.
So, from what i've read so far, there is another symbolic link based method, that creates a partition on the SD card and then the phone appears to think its still on the phone.
I have a stock ROM and would prefer not having a custom ROM for now. What would be the suggested way of getting Apps2sdext functionality? I mean like installing a package after rooting.
I have read about rooting, and apps2sdext also seems to need root. But i'd really appreciate if somebody could drop some links as to what I could do. Here are my thoughts of what they might be:
Root phone
Format SD card with partitions
Install a2sd
Another question: is there no way of using Gparted, etc to resize partitions and create the ext4 partition on pc? As in before taking it to the phone? that way no need to reinstall some apps.
Ok so for now I see I can use Z4Root to root my phone. So i've sorted that part out.
I also saw on DarkTremor apps2sd page that stock roms need a custom init.rc. Where are the instructions for that?
gontadu said:
Another question: is there no way of using Gparted, etc to resize partitions and create the ext4 partition on pc? As in before taking it to the phone? that way no need to reinstall some apps.
Click to expand...
Click to collapse
I'm not quite sure. I'm not an A2SD user. But, here are my hunches/ideas/opinions:
I suggest you partition with the partitioner in the recovery image. A2SD may have trouble finding the ext partition when the layout is quite different from what it expects, though I'm not quite sure.
As for not having to reinstall apps, this is what I did prior to installing A2SD:
Move all apps to phone memory
Backup
Partition SD
Flash A2SD
Install A2SD (yes, I had to manually launch a2sd scripts --')
Done
Works as intended, but I've found that there wasn't a significant increase in free phone memory storage, but I'm very sure a2sd was applied.
So I went back to native A2SD.
Which leads me to say: I suggest flashing a custom ROM with A2SD integrated
Idk, maybe I just didn't give A2SD some time. Just try it out.
Hmmm interesting! Still digging up more info as i go along...
Ok so far I installed, z4root and it installs fine and does the whole root and restart thing.
Now when i browse from adb shell i still get the $ prompt and not the # prompt. But when i go into z4root it provides options for re-root and un-root...
UPDATE: well i found out that once the shell opens as $, you type su. When you do that look at your phone and accept the superuser request, otherwise permission denied appears on the pc screen. now i have the # prompt!!!
UPDATE: Got Clockworkmod running now! and exploring a2sd... i give up. cannot find a concise thing that says here's the script that you use after doing the clockworkmod. what do i do???
Hi,I came from megatron rom and is using CM7 rom now.Not sure partitioning of sd card work on stock rom but you can try.
Disclaimer: I'm not responsible for anything that happens to your phone! Below is what I did.
Instructions: Download DarkTremor Apps2sd.zip file.
Then,Backup all your sd card contents on your PC.You MUST backup as partitioning of sd card will wipe the whole sd card.
Reboot in recovery and select partition sd card > Partition sd card again> Swap Size:Choose 0 (I'm not sure what the other numbers will do.) > Then 512mb for the next option.Then it will start partitioning. > After you're done,upgrade ext.2 to ext.3 > Then upgrade ext.3 to ext.4 > After that,connect usb or take out sd card and put DarkTremor apps2sd.zip file in the root of your sd card and then flash it!
DONE AND PROFIT!
Your internal storage should decrease very slowly because your apps are now 'tricked' into being installed on your sd card Hope this helps!
Sorted my problem out!!
Gonna post details asap! So excited
gontadu said:
Sorted my problem out!!
Gonna post details asap! So excited
Click to expand...
Click to collapse
So you did my method or what?
Nope actually not. Found a simpler method that's easier for noobs.
So here goes in very short since I don't have links
1. Split memory card into two partitions. I used 1GB. I did the partitioning on Ubuntu as it was much easier to just resize the partition using gparted. I am not sure what file systems are supported for the apps but i used ext3 for the 1GB. Backup should not be necessary but you are welcome to be careful
2. Root phone with z4root, very straightforward process
3. Install Link2SD from Android Market.
4. Once its installed, it'll prob ask for root permissions. Grant them.
5. Open Link2SD and in the list, one by one for each app you'd like to move, select and it opens a page with some details. Just click on create link, and in the next page an option for moving cache also shows. Select that too. Then the app gets moved in the background and slowly your space starts increasing.
6. I did not move any preinstalled apps that came with the phone. Just moving the apps I installed gave me plenty of space not to worry with App 2 SD (froyo method) or anything. Also with this method, mounting for USB Mass Storage also gets quicker.
What's there not to line?
Always do a nandroid backup! I didn't as i didn't think much of an app.. my phone went into continued android logo loop. After several tries of battery pull,I managed to get into the phone but many of my apps went missing.. sighz...
Running Stock rom
Sent from my LG-P500 using XDA App
yanuk said:
Always do a nandroid backup! I didn't as i didn't think much of an app.. my phone went into continued android logo loop. After several tries of battery pull,I managed to get into the phone but many of my apps went missing.. sighz...
Running Stock rom
Sent from my LG-P500 using XDA App
Click to expand...
Click to collapse
You mean the backup option that is there in clockwork mod recovery menu right? I screwed up the files once and the backup came in real handy!
Sent from my LG-P500 using XDA App
It may not help you but I was using megatron rom froyo 2.2 and had barley any memory space on my phone and since I flashed CM7 rom from milk I have tons of space I have twice as many as many apps and stol 100 megabits left
Sent from my LG-P500 using XDA Premium App
Just curious, on a scale of 10 how hard is it to get cm7 onto your optimistic? And any clue whether existing settings are lost? Any other benefits? And features missing? It would be nice if we either got more battery life or better performance if not both
Sent from my LG-P500 using XDA App
I use a stock ROM (2.2.1) and I have rooted and installed "Move2SD Enabler" from the market and moved all the apps to SD (except for widgets) in the plain simple old fashion. I currently have over 150 apps installed with about 90MBytes of internal memory free.
1. About Swap
I've used latest nAa kernel and minicm7 for a while, but something bugs me..
It says that nAa kernel has "Swap" function. CUrious, I tried several methods.
Firstly, I tried to use swapper from android market. Seems like it's no use, since typing "free" on terminal emulator shows "0" for swapping (swap data is created already on my SD card). Not working, I uninstalled it.
Then, somebody told me to use swapper 2 since it's working nicely on him. Strangely enough, my market said it's not compatible with my phone.
Third, I tried to create a linux swap file on my SD card with 200 MB size using partition manager. And my phone runs lag like hell. So, I finally delete the partition again and wipe factory reset etc.
My question is : How do I turn swap things on ?
2. About Ext4
Until recently (before I created linux swap partition on my SD card and finally erased it again), I never create an ext4 partition on my SD card. Now, I'm trying to use it. What is the difference between using an ext4 partition and not ?
Thank you very much for your answer
StardustGeass said:
1. About Swap
I've used latest nAa kernel and minicm7 for a while, but something bugs me..
It says that nAa kernel has "Swap" function. CUrious, I tried several methods.
Firstly, I tried to use swapper from android market. Seems like it's no use, since typing "free" on terminal emulator shows "0" for swapping (swap data is created already on my SD card). Not working, I uninstalled it.
Then, somebody told me to use swapper 2 since it's working nicely on him. Strangely enough, my market said it's not compatible with my phone.
Third, I tried to create a linux swap file on my SD card with 200 MB size using partition manager. And my phone runs lag like hell. So, I finally delete the partition again and wipe factory reset etc.
My question is : How do I turn swap things on ?
2. About Ext4
Until recently (before I created linux swap partition on my SD card and finally erased it again), I never create an ext4 partition on my SD card. Now, I'm trying to use it. What is the difference between using an ext4 partition and not ?
Thank you very much for your answer
Click to expand...
Click to collapse
Here's the problem.
Apps2SD
SD swap files
SD cache files
All this adds up in total bandwidth use.
And then the speeds when reading and writing from the card are not really up to the task.
Even my Big x10i was not up to the task with a class 8 SD
The best would be for developers to partition a small piece of 'internal' storage to allow for a swap file.
OmegaRED^ said:
Here's the problem.
Apps2SD
SD swap files
SD cache files
All this adds up in total bandwidth use.
And then the speeds when reading and writing from the card are not really up to the task.
Even my Big x10i was not up to the task with a class 8 SD
The best would be for developers to partition a small piece of 'internal' storage to allow for a swap file.
Click to expand...
Click to collapse
I see then...
So, you're suggesting me to not use swap files ? ok then, thank you for your explanation and opinion
So, first of all, a big hello to the community! Spent the last 2 hours digging around the forum, as I'm a new user and I'm amazed with this big things Galaxy has to add! I came from a Symbyan platform, and the only thing I done was Flash my Nokia 5800 with a C6 FW by PHNT.
Few days ago, I moved to this awsome Android world, where I see alot fo stuff new to my eyes, and that I wish some replys from you guys.
You all gonna say this questions are answered elsewhere, but I digged the forum, and I find the most various kind of answers for the same questions, which I'm now pretty much confused.
The thing is, I want to apply this CM7.1(or , dunno which is better), from what I see, it improves greatly our Galaxy Ace, but on the other hand, I saw a post that says taht this is simple as Root(Which I've done already), and apply a CWM or something, and apply the CM7.1 same way as Rooting.
The fulcral questions is which is the safest(and noobier-frindly) way to apply that CM 7.1?
Also if someone can aid me, what CWM does exactly? Its a backup app like TitaniumBackup?
I think you did not read This my friend.
And CWM is a custom recovery which has a lot more features than stock recovery.
CWM5 can be found Here
The tutorial is at the first link I gave you. But if you didn't understand,
I'll tell you step-by-step
1. Download the rom and CWM and put it in your phone.
2. Enter recovery and choose install zip from SD then choose CWM.
3. Reboot and enter recovery again.
4. Your now in CWM Recovery, before flashing any rom, doa wipe data.
5. Choose install zip fom SD card and choose CM7.1/2
reboot then voila
Hited Thanks for you!
Really helpfull thread! How did I missed it lol!
So the thing taht really caught my attention was the option to don't waste internal memory, which is exactly the only reason I wanted to Cyan Mod.
If it's not a hassle to you, can you pinpoint me the EXACT file to run from CWM? I really don't wanna mess up my phone(though I will only apply it after I buy my 16GB SDcard soon).
Here's where I stand:
1-> I rooted my device with some root I found over youtube, worked fine, then google play said me to update the superuser app, so I did. I guess it's updated, no problems there.
2-> Now I need CWM(I got a file named "recovery-clockwork-5.0.2.6-galaxyace-fix.zip", should I use that one or try to find the v4 one?
3-> Then I need to run on Home Button+Power to install that mod, but here comes 4 questions:
"You need to extend the internal app storage to the sd card. The FIRST thing you need to do is go back to Clockworkmod recovery mode and partition your sdcard so that it has a ext4 extension. Then update from ketut.kumajaya's post with cf-rootdtapps2sd???.zip(forgot the full name). That defaults all downloaded apps to run from the sd card."
3.1-> Does CWM have the partition option already? And does it formats the SDcard?
3.2-> Can u direct me the EXACT file so I don't mess this up?
3.3-> This doesn't wipes any data from the phone right?
3.3.3-> And what about the apps alraedy installed and using the internal memory even though they are "in SD card, as phone shows", i need to reinstall them right?
Ty again for any hassle done! And I will thank you agani, just for wasting the time here with me
2. Ok flash that. Some roms are compatible with that but not on v4
3. No. Don't use CFRoot. It's for stock roms only.
3.1 Yes, you can partitition SD card on CWM.
And yes, it wipes everything in your SD
and after you have partitioned it, download Link2sd from the market, choose ext4 then link every app (except system apps of course)
I guess that answers all, just didn't get what u meant by that, do i use taht version 5 or the v4 of CWM? And what is a stock rom? I never changed nothing on my phone except the Rooting.
NunoPitbull said:
I guess that answers all, just didn't get what u meant by that, do i use taht version 5 or the v4 of CWM? And what is a stock rom? I never changed nothing on my phone except the Rooting.
Click to expand...
Click to collapse
stock roms are roms made by samsung. Your currently in a stock rom but you are going to CM7 so don't use it anymore. Use v5
Wait, can't I have that Mod to save all in SDcard and save internt memory? I just want that thing, I dont have Cyan mod if I can do that without it
Can u pinpoint me to the correct file please?
NunoPitbull said:
Wait, can't I have that Mod to save all in SDcard and save internt memory? I just want that thing, I dont have Cyan mod if I can do that without it
Can u pinpoint me to the correct file please?
Click to expand...
Click to collapse
After you partition your sd card thorough cwm recovery, do a factory reset and then install cm7.2. Then you can use either s2e or link2sd or a2sd to free up your internal memory.
If you are asking for exact cm7.2 file, there are many of them. Try cm7.2 by vo1 first. Thread will be in development section created by Lovetz.
It seems your not really getting what I mean
First I wanted the CM7 mod, BUT after reading that thread you showed me, I saw its possible to free up internal memory WITHOUT the need of installing CM7, and installing that other file right?
I just wanted to know which is the right file so I don't mess up. I just want to have the option to save all to SDcard, and not to use Internal memory. That was the reason I wanted CM7. Understand now?
use minitool partition wizard to repartition your sdcard. create two partition, both as primary, first partition as fat32 and second partition as ext2/ext3/ext4
http://www.partitionwizard.com/free-partition-manager.html
then flash this from clockworkmod recovery. before flashing do mount system and data manually
http://forum.xda-developers.com/showthread.php?t=715940
then install this
https://play.google.com/store/apps/details?id=com.elgubbo.a2sdGUI&hl=en
NunoPitbull said:
It seems your not really getting what I mean
First I wanted the CM7 mod, BUT after reading that thread you showed me, I saw its possible to free up internal memory WITHOUT the need of installing CM7, and installing that other file right?
I just wanted to know which is the right file so I don't mess up. I just want to have the option to save all to SDcard, and not to use Internal memory. That was the reason I wanted CM7. Understand now?
Click to expand...
Click to collapse
I FULLY understand what you want And I am telling you that you do not need those files to transfer apps to sd. ust partition your SD via CWM, doanload Link2sd choose ext4 then link all of them
an0nym0us_ said:
use minitool partition wizard to repartition your sdcard. create two partition, both as primary, first partition as fat32 and second partition as ext2/ext3/ext4
http://www.partitionwizard.com/free-partition-manager.html
then flash this from clockworkmod recovery. before flashing do mount system and data manually
http://forum.xda-developers.com/showthread.php?t=715940
then install this
https://play.google.com/store/apps/details?id=com.elgubbo.a2sdGUI&hl=en
Click to expand...
Click to collapse
Doo:DAce said:
I FULLY understand what you want And I am telling you that you do not need those files to transfer apps to sd. ust partition your SD via CWM, doanload Link2sd choose ext4 then link all of them
Click to expand...
Click to collapse
See what I mean? One guy tells me totally different apps to download + a PC program and to flash another app then you say, and you say with only 1 app + the Link2SD I can do it That's why I get confused ;p I guess both apps are good, which one the safest and best?
Doo:DAce said:
I FULLY understand what you want And I am telling you that you do not need those files to transfer apps to sd. ust partition your SD via CWM, doanload Link2sd choose ext4 then link all of them
Click to expand...
Click to collapse
So it's only that? No need for that "update from ketut.kumajaya's post with cf-rootdtapps2sd???.zip(forgot the full name)" zip?
Also which CWM I use, v4 or the one I have?("recovery-clockwork-5.0.2.6-galaxyace-fix")
Lol they are many ways to partition your SD card ...cwm recovery eliminates the need of a PC but Mini tool partition wizard is recommended ( though I trust cwm recovery blindly )
Dragonoid said:
Lol they are many ways to partition your SD card ...cwm recovery eliminates the need of a PC but Mini tool partition wizard is recommended ( though I trust cwm recovery blindly )
Click to expand...
Click to collapse
Can you tell me how is it partitioned?
First partition will be for photos etc, the 2nd will be for apps?
Can you pinpoint me the .apk file for CWM you use?
Also, what should I expect when doing the partition trought CMW? Its just an option saying to do the partition? I read taht is needed to mount/unmount things,I have NO IDEA on how to achieve that.
If u got access to pc, better do it on pc with minitool after making backup of your whole sdcard. Yes cwm can do it but who know when disaster strike u'll lose all your sdcard data. Better to be safe than sorry mate.
NunoPitbull said:
Can you tell me how is it partitioned?
First partition will be for photos etc, the 2nd will be for apps?
Can you pinpoint me the .apk file for CWM you use?
Also, what should I expect when doing the partition trought CMW? Its just an option saying to do the partition? I read taht is needed to mount/unmount things,I have NO IDEA on how to achieve that.
Click to expand...
Click to collapse
Well cwm 5 can be found by Googling ( cwm 5 for Samsung galaxy ace)
2. It's not how you think ..once you partition your SD card the partition is inaccessible to you ..example if on a 2 gb card if u create a partition of 512mb when u go to settings the phone will read your SD card as 1.5 gb
3. Cwm guides are readily available on you tube
4. As the other guys have said b4 u need to use apps like link2sd to be able to use the partition ..entirely for apps alone ...s2e is the best but works ONLY on cm7
5. During the partition process your SD card will be formatted !!!
Backup your Data first! !!!!
6. Anything else???
P.S. I can't provide links as I m on my phone and even on a PC I would have advised u to Google
So, in your example, on a 2GB card, the phone will read only 1,5GB, so what will be that 1,5GB for? And the 512MB what will they be for?
Thanks for the reply
NunoPitbull said:
So, in your example, on a 2GB card, the phone will read only 1,5GB, so what will be that 1,5GB for? And the 512MB what will they be for?
Thanks for the reply
Click to expand...
Click to collapse
1.5 gb will be for your media -photos videos files etc that 512 MB is accessible only through s2e,link2sd and other such apps( u see I know only these 2 ) this 512 MB can be used to store your apps ---I.e. move the dalvik cache to the SD card which in turn results in a lot of free internal space....
Once upon a time I had 120 apps on my phone and 50 MB was still remaining.
P.S. please don't ask what dalvik cache is ...Google it instead ..ull get better info
Dragonoid said:
1.5 gb will be for your media -photos videos files etc that 512 MB is accessible only through s2e,link2sd and other such apps( u see I know only these 2 ) this 512 MB can be used to store your apps ---I.e. move the dalvik cache to the SD card which in turn results in a lot of free internal space....
Once upon a time I had 120 apps on my phone and 50 MB was still remaining.
P.S. please don't ask what dalvik cache is ...Google it instead ..ull get better info
Click to expand...
Click to collapse
So u still loose internal space even after this patchs?