Related
Hallo out there,
I want to install a custom firmware on my SE xperia mini. It's manufacture date is 11W46
Is it able to put a custom firmware on it?
smilesger said:
Hallo out there,
I want to install a custom firmware on my SE xperia mini. It's manufacture date is 11W46
Is it able to put a custom firmware on it?
Click to expand...
Click to collapse
An Xperia Mini is not an E10i, the E10i is an Xperia X10 Mini
Should you actually mean the E10i, there are custom firmwares that run on stock kernel, notably Froyo Roms and Gingerbread up to version 2.3.5.
Do you prefer any? I really dont know what I have to do :/
smilesger said:
Do you prefer any? I really dont know what I have to do :/
Click to expand...
Click to collapse
Check your model-number first, it's on the sticker behind the back-cover.
I'll look for some links...
Sony Ericsson E10
SI 1257-5368 CB5 11W46
TYPE: AAD-3880069
FCC ID: PY7A3880069
IC: 4170B-A3880069
This is everything I found on the sticker.
Thanks for your help
smilesger said:
Sony Ericsson E10
SI 1257-5368 CB5 11W46
TYPE: AAD-3880069
FCC ID: PY7A3880069
IC: 4170B-A3880069
This is everything I found on the sticker.
Thanks for your help
Click to expand...
Click to collapse
That's the latest date i've seen on an x10mini (sure it doesn't read 10w46?)
I wouldn't risk unlocking the bootloader, so try these:
Andread 2.3.5
MiniCM6
or
MiniCM7 (version 2.0.7, based on GB 2.3.5, scroll down the list to find it) the last version to run on stock kernel.
Wow!
Thank you very much!!!
I will reply and inform you about the mobile status
Now I've got a problem.
If I want to install the MiniCM6 I have to Reboot to CWM recovery.
I've extracted the CWM recovery on my SD card.
When I turn the Phone off and turn it On again, pressing and holding the "back" button but nothing is happening
smilesger said:
Now I've got a problem.
If I want to install the MiniCM6 I have to Reboot to CWM recovery.
I've extracted the CWM recovery on my SD card.
When I turn the Phone off and turn it On again, pressing and holding the "back" button but nothing is happening
Click to expand...
Click to collapse
Download CWM-recovery-3.2.0.0-r3-x10mini-Amend.zip from this post.
Use flashtool to root your phone (Press the padlock button and follow instructions)
Install xRecovery (that's the big + button) and follow instructions
Reboot in xRecovery (Flashtool - Advanced menu - Reboot into Recovery - Default Recovery) and install the above zip from your sd-card
Reboot the phone while repeatedly pressing the back-button.
Install the ROM according to the instructions in the ROM post.
SmG67 said:
Download CWM-recovery-3.2.0.0-r3-x10mini-Amend.zip from this post.
Use flashtool to root your phone (Press the padlock button and follow instructions)
Install xRecovery (that's the big + button) and follow instructions
Reboot in xRecovery (Flashtool - Advanced menu - Reboot into Recovery - Default Recovery) and install the above zip from your sd-card
Reboot the phone while repeatedly pressing the back-button.
Install the ROM according to the instructions in the ROM post.
Click to expand...
Click to collapse
I can't press the padlock button. Is there anything I have to do before?
-edit-
Worked now. I had to switch to debugging mode
-edit-
MiniCM6 is now installed and its working perfectly. Thanks for your big help SmG67!
smilesger said:
I can't press the padlock button. Is there anything I have to do before?
Click to expand...
Click to collapse
uhmmm, yeh i guess you may need to turn on usb-debugging in: settings - applications - development
and neraliar
SmG67 said:
Download CWM-recovery-3.2.0.0-r3-x10mini-Amend.zip from this post.
Use flashtool to root your phone (Press the padlock button and follow instructions)
Install xRecovery (that's the big + button) and follow instructions
Reboot in xRecovery (Flashtool - Advanced menu - Reboot into Recovery - Default Recovery) and install the above zip from your sd-card
Reboot the phone while repeatedly pressing the back-button.
Install the ROM according to the instructions in the ROM post.
Click to expand...
Click to collapse
smilesger said:
I can't press the padlock button. Is there anything I have to do before?
-edit-
Worked now. I had to switch to debugging mode
-edit-
MiniCM6 is now installed and its working perfectly. Thanks for your big help SmG67!
Click to expand...
Click to collapse
Okay it wont boot. Its constantly replaying the boot animation... What did I do wrong? :/
smilesger said:
Okay it wont boot. Its constantly replaying the boot animation... What did I do wrong? :/
Click to expand...
Click to collapse
Did you do all the wipes?
in CWM Main menu:
Wipe data/factory reset
Wipe cache
in CWM Advanced menu:
Wipe Dalvik Cache
Wipe Battery Stats
No, I didnt install them :/
Is there now any way to get into the cwm recovery mode again :/ ?
smilesger said:
No, I didnt install them :/
Is there now any way to get into the cwm recovery mode again :/ ?
Click to expand...
Click to collapse
Yes, press home and power buttons together, it will reboot the phone, as soon as the kernel logo appears (white sony ericsson) press the back-button repeatedly to get into CWM again.
SmG67 said:
Yes, press home and power buttons together, it will reboot the phone, as soon as the kernel logo appears (white sony ericsson) press the back-button repeatedly to get into CWM again.
Click to expand...
Click to collapse
Thank you
Now it's booted up and running! Thanks again!
Hi,
I unlocked my xperia mini pro and then tried the Fastboot Tool to flash the boot.img that belongs to CM 10. It was always failing with the Fastboot and the command prompt fastboot.
By mistake, I flashed another .img file and now the phone decided now to start up. Not even given any LED colour or so.
What can I do?
Thanks
What Rom did you flash. Second kernel did you flash ?
Device : Xperia Mini ST15i
Rom : Pureness V4
Kernel : Lupus V9
Mods : Beats audio + Walkman V7.5
bhaidar said:
Hi,
I unlocked my xperia mini pro and then tried the Fastboot Tool to flash the boot.img that belongs to CM 10. It was always failing with the Fastboot and the command prompt fastboot.
By mistake, I flashed another .img file and now the phone decided now to start up. Not even given any LED colour or so.
What can I do?
Thanks
Click to expand...
Click to collapse
Please flash a stock rom (ftf file) with flashtool first. If your device doesn't boot after this, then it is a real problem. Remember to wipe data.
Hi,
I started out by unlocking the bootloader and it worked fine.
I tried to boot the CM image file, it was always giving me an error in Fastboot mode saying that outside range or so.
Then I downloaded Rage and tried to fastboot that image, after several trials, I can no longer start my phone.
Thank you
eojlicec said:
What Rom did you flash. Second kernel did you flash ?
Device : Xperia Mini ST15i
Rom : Pureness V4
Kernel : Lupus V9
Mods : Beats audio + Walkman V7.5
Click to expand...
Click to collapse
abcdjdj said:
Please flash a stock rom (ftf file) with flashtool first. If your device doesn't boot after this, then it is a real problem. Remember to wipe data.
Click to expand...
Click to collapse
Can I flash a stock rom while the phone is not starting up? If yes, where to get one? I already know how to use the flashtool on my Windows.
Thanks
bhaidar said:
Can I flash a stock rom while the phone is not starting up? If yes, where to get one? I already know how to use the flashtool on my Windows.
Thanks
Click to expand...
Click to collapse
There are download links in the sticked thread by someguyfromhell, download a ftf for your device
Open flashtool and click the flash, flashmode, select the ftf and click okay.
Now take out the battery of your phone, wait a few seconds, insert battery again, hold volume down, connect usb to pc while holding volume down, the green led will light up. The flashing process will start and when it's finished you will get a working rom again :good:
Or you could try to download a kernel for your device (like rage kernel), take off battery, insert it, hold volume up, connect it to pc while holding volume up, start flashtool, click the flash, fastboot mode, select the boot.img for your device, click ok. That's it
mihahn said:
There are download links in the sticked thread by someguyfromhell, download a ftf for your device
Open flashtool and click the flash, flashmode, select the ftf and click okay.
Now take out the battery of your phone, wait a few seconds, insert battery again, hold volume down, connect usb to pc while holding volume down, the green led will light up. The flashing process will start and when it's finished you will get a working rom again :good:
Or you could try to download a kernel for your device (like rage kernel), take off battery, insert it, hold volume up, connect it to pc while holding volume up, start flashtool, click the flash, fastboot mode, select the boot.img for your device, click ok. That's it
Click to expand...
Click to collapse
Thanks a lot for your info. Is this the thread?
http://forum.xda-developers.com/showpost.php?p=27376024&nocache=1
Thanks
bhaidar said:
Thanks a lot for your info. Is this the thread?
http://forum.xda-developers.com/showpost.php?p=27376024&nocache=1
Thanks
Click to expand...
Click to collapse
Yes that's the right one
By the way I appreciate hitting thanks
mihahn said:
There are download links in the sticked thread by someguyfromhell, download a ftf for your device
Open flashtool and click the flash, flashmode, select the ftf and click okay.
Now take out the battery of your phone, wait a few seconds, insert battery again, hold volume down, connect usb to pc while holding volume down, the green led will light up. The flashing process will start and when it's finished you will get a working rom again :good:
Or you could try to download a kernel for your device (like rage kernel), take off battery, insert it, hold volume up, connect it to pc while holding volume up, start flashtool, click the flash, fastboot mode, select the boot.img for your device, click ok. That's it
Click to expand...
Click to collapse
Hi,
the rage kernel worked fine . I can see a screen saying Xperia Free xdadevelopers, Sony Ericsson.
Now, I only have kernel right? How to proceed to get a rom? Many thanks
bhaidar said:
Hi,
the rage kernel worked fine . I can see a screen saying Xperia Free xdadevelopers, Sony Ericsson.
Now, I only have kernel right? How to proceed to get a rom? Many thanks
Click to expand...
Click to collapse
Which rom do you want? Cyanogenmod 10 or which rom? Rage Kernel is only for ics based roms
morkso(agency)
mihahn said:
Which rom do you want? Cyanogenmod 10 or which rom? Rage Kernel is only for ics based roms
Click to expand...
Click to collapse
Hi,
I installed for now the rage kernel, then installed the ftf stock firmware.
My phone started up perfect Thank you.
I noticed your links at the end of your signature, I will follow your instructions to flash the CM 10 for mango (SK17i).
Sounds good?
Regards
Bilal
bhaidar said:
Hi,
I installed for now the rage kernel, then installed the ftf stock firmware.
My phone started up perfect Thank you.
I noticed your links at the end of your signature, I will follow your instructions to flash the CM 10 for mango (SK17i).
Sounds good?
Regards
Bilal
Click to expand...
Click to collapse
Yes, of course. For any further questions, just ask :good:
By the way: You first flashed rage kernel and after that the stock.ftf? Because the stock ftf has overwritten your rage kernel. You have to flash the kernel after the ftf
mihahn said:
Yes, of course. For any further questions, just ask :good:
By the way: You first flashed rage kernel and after that the stock.ftf? Because the stock ftf has overwritten your rage kernel. You have to flash the kernel after the ftf
Click to expand...
Click to collapse
So do I need the kernel? Or the ftf includes a default one?
I want to flash CM10 for Mango, shall I follow your link on how to do so?
Thanks
bhaidar said:
So do I need the kernel? Or the ftf includes a default one?
I want to flash CM10 for Mango, shall I follow your link on how to do so?
Thanks
Click to expand...
Click to collapse
Okay to install cm10 do this:
1. Download cm-10 from FXP for mango and the gapps for jelly bean 4.1 (search on google)
2. Copy the two zip files to your sdcard
3. Open the cm10 zip on your pc
4. Take the boot.img to the flashtool installation folder -> kernels (you have to make this folder)
5. Go to the flashtool folder -> drivers and install all drivers for all devices/modes
6. Launch flashtool
7. Click the flash -> fastboot mode
8. Shut down phone, wait 5 seconds, hold volume up and while holding volume up connect phone to pc (blue led will light up)
9. On PC: Select kernel to flash -> go to kernels folder -> select the boot.img
10. Wait a few seconds until flashing has ended
11. Unplug phone and start it. While it starts press volume down again and again until you are in cwm
12. Navigate with the volume keys, select with the home button
13. Go to backup/restore -> backup and backup your stock rom
14. go back (back button)
15. Now wipe data/factory reset, wipe cache partition, advanced -> wipe dalvik cache
16. Install zip from sdcard -> choose the cm10 zip
17. Wait until installation has finished
18. install zip from sdcard -> choose the gapps zip
19. Wait until it has finished
20. Reboot phone and enjoy jellybean 4.1.2
That's all, hit thanks if this has helped you :good:
mihahn said:
Okay to install cm10 do this:
1. Download cm-10 from FXP for mango and the gapps for jelly bean 4.1 (search on google)
2. Copy the two zip files to your sdcard
3. Open the cm10 zip on your pc
4. Take the boot.img to the flashtool installation folder -> kernels (you have to make this folder)
5. Go to the flashtool folder -> drivers and install all drivers for all devices/modes
6. Launch flashtool
7. Click the flash -> fastboot mode
8. Shut down phone, wait 5 seconds, hold volume up and while holding volume up connect phone to pc (blue led will light up)
9. On PC: Select kernel to flash -> go to kernels folder -> select the boot.img
10. Wait a few seconds until flashing has ended
11. Unplug phone and start it. While it starts press volume down again and again until you are in cwm
12. Navigate with the volume keys, select with the home button
13. Go to backup/restore -> backup and backup your stock rom
14. go back (back button)
15. Now wipe data/factory reset, wipe cache partition, advanced -> wipe dalvik cache
16. Install zip from sdcard -> choose the cm10 zip
17. Wait until installation has finished
18. install zip from sdcard -> choose the gapps zip
19. Wait until it has finished
20. Reboot phone and enjoy jellybean 4.1.2
That's all, hit thanks if this has helped you :good:
Click to expand...
Click to collapse
Thanks, the FXP is here? http://forum.xda-developers.com/showthread.php?t=1780319
What if I want to install from here, http://get.cm/?device=mango, is that Okay?
Thanks
bhaidar said:
Thanks, the FXP is here? http://forum.xda-developers.com/showthread.php?t=1780319
What if I want to install from here, http://get.cm/?device=mango, is that Okay?
Thanks
Click to expand...
Click to collapse
Actually, it's this one
Thanks. I will choose the other though, I am used to their nightly builds on my other phone
Many thanks
bhaidar said:
Thanks, the FXP is here? http://forum.xda-developers.com/showthread.php?t=1780319
What if I want to install from here, http://get.cm/?device=mango, is that Okay?
Thanks
Click to expand...
Click to collapse
How would I use the backedup stock? What's the case, and how to restore, by just going to recovery and restore?
Thanks
bhaidar said:
How would I use the backedup stock? What's the case, and how to restore, by just going to recovery and restore?
Thanks
Click to expand...
Click to collapse
If you have made a cwm backup of stock rom or stock based rom, then when you are on the fxp kernel, do not restore the backup. Firstly, if you want to restore the cwm backup then flash rage kernel or any stock ics based kernel and then go to restore in cwm. You cannot use stock rom with fxp kernel because the kernel configurations are for cm and not stock.
Press Thanks if I helped
bhaidar said:
How would I use the backedup stock? What's the case, and how to restore, by just going to recovery and restore?
Thanks
Click to expand...
Click to collapse
Like the guys above said, flash rage kernel and afterwards restore the backup. This is if you want to come back to stock rom one time
I am on CM10 from FXP but made some changes by M66B (SK17 user too)
Look on my signature to download the last version of the extended ROM. Battery improvement on this ROM is one of the main features
Works the same or better than FXP one. The boot.img comes inside with the ROM zip file, just follow the steps listed by mihahn. Last version to this date is 202 ("~FXP202 features 1-3,7-9,12-13,23-24,26,28-38,40-42 (January 11, 2013)" that's the name of the zip file)
This Is Clockwork Mod Recovery Based on cray_Doze Recovery For other Xperia Devices !!
I just Ported It and Changed Some Values To Work on our Device
So Far I have Tested It Everything Works And i also added Mount USB Storage in CWM ! It Was Really Annoying Not having It
Requirements
Stock FW
Rooted Phone
[ Instructions ]
Download The Zip File
Extract The Contents
Go to Extracted folder and Excute Install.bat
Follow The On Screen Instructions ( Its Pretty Easy )
[How To Enter Recovery ]
When Sony Logo Appears Wait for The First Vibration and Press Vol Up key and Baam
Download : CWM 6.0.3.0 For XSP v1
Cheers !
Regards SaM
All Credit goes to @cray_Doze For his Based Recovery !
potamych for his CWM Installed !
DooMLorD For advising and Helping !
Me for Porting it !
If U find any Bug Feel Free To Report In Thread ! Ill Try To Fix them ASAP
Finally u came back... Welcome to XDA bro... Good Work
Hello!
Can I use this CWM if I have already installed a CWM (namely CWM for locked bootloaders by alivanov79)?
SaM` said:
This Is Clockwork Mod Recovery Based on cray_Doze Recovery For other Xperia Devices !!
I just Ported It and Changed Some Values To Work on our Device
So Far I have Tested It Everything Works And i also added Mount USB Storage in CWM ! It Was Really Annoying Not having It
Requirements
Stock FW
Rooted Phone
[ Instructions ]
Download The Zip File
Extract The Contents
Go to Extracted folder and Excute
Follow The On Screen Instructions ( Its Pretty Easy )
[How To Enter Recovery ]
When Sony Logo Appears Wait for The First Vibration and Press Vol Up key and Baam
Download : CWM 6.0.3.0 For XSP v1
Cheers !
Regards SaM
All Credit goes to @cray_Doze For his Based Recovery !
potamych for his CWM Installed !
DooMLorD For advising and Helping !
Me for Porting it !
If U find any Bug Feel Free To Report In Thread ! Ill Try To Fix them ASAP
Click to expand...
Click to collapse
Woow!! Thank you, work usb mount. :good:
anzo said:
Woow!! Thank you, work usb mount. :good:
Click to expand...
Click to collapse
A small request... pls do not quote the OP again.. :banghead::banghead::banghead::banghead:
Rajeev said:
Finally u came back... Welcome to XDA bro... Good Work
Click to expand...
Click to collapse
Yea bro I been working on this before I got sick finally today I was feeling better so I completed it. Thank a lot mate mate soon ill update everything just lemme get better
Sajat. said:
Hello!
Can I use this CWM if I have already installed a CWM (namely CWM for locked bootloaders by alivanov79)?
Click to expand...
Click to collapse
Yes. U can use it over that it will just replace the old one
@anzo im glad u like it but there is always a button to say thanks
Sent From Xperia SP using XDA Premium
Allowing the thread starter:
Instructions:
Connect the phone to the PC.
Run install.bat.
Choose item #1.
On the phone allow root access.
At the end of the script working press any button on PC keyboard.
To enter in CWM after first vibration press (not hold) several times volume button + until the second vibration.
No offense bro!! But u need to just press once only once! Lemme tell u how and anyone can try and back me up! U press the power button that's a vibration then Sony logo comes and u wait for another vibration and that's it u press it once and baam! Try it urself and instructions are pretty easy. And if u already gave access to adb shell u don't need to grant again. But yea thanks for pointing it out who doesn't know
Sent From Xperia SP using XDA Premium
Does this backup the ext2 partition that is needed for link2sd to work and have saved apps??
The other cwm for our Sp does not back this up,always says not detected even when it is and is working fine.
Sent from my C5303 using xda premium
Umm on Existenz 1.0.0 this doesn't work and stays stuck on Sony Logo then after sometime goes back to rebooting normally?
Please help guys I want to flash 1.37 OTA update
After installing the experinz ROM you need to flash the NUT rebootmod that was posted in the op of rom.
I had issues with this 2nd time around. Try installing busy box then install into system then flash again even (after 2-3 try it should stick)
Sent from my C5303 using xda premium
After installed [v2][HonamiUltraized][White Edition], I lost CWM recovery!!! couldn't get into it when pressing volume + at the Sony boot screence, I tried to run install.bat for CWM but didn't succeed? Does anyone have a experience with this problem and how to fix it? Thanks
badboyblue said:
After installed [v2][HonamiUltraized][White Edition], I lost CWM recovery!!! couldn't get into it when pressing volume + at the Sony boot screence, I tried to run install.bat for CWM but didn't succeed? Does anyone have a experience with this problem and how to fix it? Thanks
Click to expand...
Click to collapse
That's probably because your ROM doesn't have a recovery installed. Just reinstall a recovery
Nanostray said:
That's probably because your ROM doesn't have a recovery installed. Just reinstall a recovery
Click to expand...
Click to collapse
As I said above, I did tried to reinstall recovery again, but it didn't work :crying:
i flashed .257 kernel , i rooted and installed cwm recovery , and i flashed back the 2.254 kernel . But now offline charging doesn't work for me.. Why? How can i fix this?
eu8umhc said:
i flashed .257 kernel , i rooted and installed cwm recovery , and i flashed back the 2.254 kernel . But now offline charging doesn't work for me.. Why? How can i fix this?
Click to expand...
Click to collapse
Try this Fix
Sent from my C5302 using Tapatalk
Siddhesh said:
Try this Fix
Sent from my C5302 using Tapatalk
Click to expand...
Click to collapse
thank you , it worked
Solved : Deamon not running error in Xperia SP
some one got an error like "deamon not running" error for xperia sp, especially in 64 bit computers. I found one solution
just download the attachment from my post and follow the steps
1. Extract the file to adb folder in CWM 6.0.3.0 For Locked Bootloader ( replace the old adb file )
2. click install.bat
note: I'm not modifying any of your work. this is the latest adb file works with 64bit computers also. I dnt know any one else found it or need it. its works for me.....
Thanks
It Never Worked for me!
Sent From My Sony C5302 Using XDA Premium Mobile App
Hi,
i have a problem with my Samsung Wave 8500
I succesfully installed http://forum.xda-developers.com/showthread.php?t=2482214
B.U.X.
my problem is that my BADA is not working
i see the Samsung Text but after that nothing happens
the android version is not the right as it does not have modem and phone working
so i wanted to install CM Badadroid
http://forum.xda-developers.com/showthread.php?t=2400126
but first the ZIP does not install
it says e:error Status 7 installation aborted
so i would like to install anything again
but my download mode never worked, it shows me up bluescreen only
before that i always flashed FOTA with normal Booted bada which always worked
my goal is to recover to bada or install the CM10.1 which would be enough for me with modem function
please help
but my download mode never worked, it shows me up bluescreen only
Click to expand...
Click to collapse
If you press 3 keys...
Code:
Volume down
Screenlock
Power On
You are not able to see Download mode on screen?
Best Regards
adfree said:
If you press 3 keys...
Code:
Volume down
Screenlock
Power On
You are not able to see Download mode on screen?
Best Regards
Click to expand...
Click to collapse
yes
i tried many combinations
btw. your one is wrong which i also tried
so i thought maybe we can manually install CM
is the clocktowermod the base and necassary ?
once i had installed the zip and the right zlib and saw the boot which says cyanogen
but it happened nothing even waiting 10mins
also i cant go in to recovery mode with CM zImage, the other one works
Edit : i know why my bada is not working
i installed FOTA from wave 2 instead of Wave 1
my download mode is not working properly
any ideas ?
Volume down + Screenlock + Power On
is working for me....
Then you can install Bada Turko CFW v10.1 from here. Follow the instructions
http://forum.xda-developers.com/showthread.php?t=2306458
And then you can install CM Badadroid as you want.
bmois said:
Volume down + Screenlock + Power On
is working for me....
Then you can install Bada Turko CFW v10.1 from here. Follow the instructions
http://forum.xda-developers.com/showthread.php?t=2306458
And then you can install CM Badadroid as you want.
Click to expand...
Click to collapse
Hey my friend
i hate the internet
download mode was working all the time haha
(if you google you will find different ones, aha maybe wave 2?)
do i have to use BUX the 4.3.1 clocktowermod as Base or do i need only zlib and the CM.zip ?
also another question
how can i format the SD card back to original again (8gb) ?
i can see the other half with the recovery mode aroma filemanager only
thank you
saywa said:
Hey my friend
i hate the internet
download mode was working all the time haha
(if you google you will find different ones, aha maybe wave 2?)
do i have to use BUX the 4.3.1 clocktowermod as Base or do i need only zlib and the CM.zip ?
Click to expand...
Click to collapse
You don't have to use BUX. Use only files and instructions from here.
http://forum.xda-developers.com/show....php?t=2400126
saywa said:
also another question
how can i format the SD card back to original again (8gb) ?
i can see the other half with the recovery mode aroma filemanager only
thank you
Click to expand...
Click to collapse
I think it has an option from the menu on recovery mode. After you flash Turko CFW, reboot on recovery mode and search on menus how to fromat your card.
bmois said:
You don't have to use BUX. Use only files and instructions from here.
http://forum.xda-developers.com/show....php?t=2400126
I think it has an option from the menu on recovery mode. After you flash Turko CFW, reboot on recovery mode and search on menus how to fromat your card.
Click to expand...
Click to collapse
i did all of them succesfully
BUT i only see CYANOGEN MOD ring loading
nothing changes
thanks will try it after that
now its working
but i cant get into the recovery mode
volume up + power
and its booting everytime
when i want to shut it down it should stay shut down
how i change that ?
adfree said:
If you press 3 keys...
Code:
Volume down
Screenlock
Power On
You are not able to see Download mode on screen?
Best Regards
Click to expand...
Click to collapse
download mode is
Vol down + Camera + Power
how i delete GAPPS to boost my Phone again ?
and when i shut down wave it auto reboots to android, how to close this option ?
and which marketplace is not buggy as google play ?
GreekBlood said:
download mode is
Vol down + Camera + Power
Click to expand...
Click to collapse
Voldown + Lock + Power
ihavenick said:
Voldown + Lock + Power
Click to expand...
Click to collapse
new fota?
ah. anyway. original and sd fota is like i said
no need to remember buttons just connect your phone to multiloader and click on download button phone automatically get in download mode
black0000 said:
no need to remember buttons just connect your phone to multiloader and click on download button phone automatically get in download mode
Click to expand...
Click to collapse
not in android
GreekBlood said:
new fota?
ah. anyway. original and sd fota is like i said
Click to expand...
Click to collapse
every fota opens gmode like i said maybe power + voldown is dmode
see
you talkin also bout button combination
cmon guys answer my questions
GAPPS deinstallation any zip ?
and any alternate for GAPPS
saywa said:
see
you talkin also bout button combination
cmon guys answer my questions
GAPPS deinstallation any zip ?
and any alternate for GAPPS
Click to expand...
Click to collapse
Nope, sorry, i'm affraid that you have to format your system partition and reflash the rom. (If you don't touch to the data partition your datas won't be lost).
For an alternate solution... Well you can try to install a slim gapps (I saw a link for one in the CM 10.1 thread. Or simply google it.)
what about deleting via Android ?
will it affect something positive ?
isnt there any zip for recovery mode ?
ok if not i could flash again but i want to keep my apps downloaded from the store
please help quick
saywa said:
what about deleting via Android ?
will it affect something positive ?
isnt there any zip for recovery mode ?
ok if not i could flash again but i want to keep my apps downloaded from the store
please help quick
Click to expand...
Click to collapse
That's exactly what I was saying. th only way to remove the gapps is to reflash the rom, and if you don't wipe the data partition, your apps will be fine. I you encounter any kind of problem in android after doing that, you will have to wipe your data partition though...
Tenroc said:
That's exactly what I was saying. th only way to remove the gapps is to reflash the rom, and if you don't wipe the data partition, your apps will be fine. I you encounter any kind of problem in android after doing that, you will have to wipe your data partition though...
Click to expand...
Click to collapse
You can delete the .apk files in the system/app folder. (root view on default filemannager)
GreekBlood said:
You can delete the .apk files in the system/app folder. (root view on default filemannager)
Click to expand...
Click to collapse
Yes of course, but there's not only apks in the gapps zip. There's also libs and a bunch of other things, so if he really want to fully uninstall gapps, or he'll have to remove everything manually, or he will have to reflash the rom. And in my opinion, the second way is really simpler.
Hello, I need to ROOT my Xperia Pro MK16i origo android 2.3.4.
I do not unlock the bootloader or change kernels, upload Roma and so I found a tutorial here: http://forum.xda-developers.com/showthread.php?t=1321582
I turned on USB debugging and installing unknown applications.
It is not by printscreen.
I tried Gingerbread and Frama root and failed.
Advise me with someone what is wrong and how to do it?
Thanks so much! for any advice!
rodrigoh6 said:
Hello, I need to ROOT my Xperia Pro MK16i origo android 2.3.4.
I do not unlock the bootloader or change kernels, upload Roma and so I found a tutorial here: http://forum.xda-developers.com/showthread.php?t=1321582
I turned on USB debugging and installing unknown applications.
It is not by printscreen.
I tried Gingerbread and Frama root and failed.
Advise me with someone what is wrong and how to do it?
Thanks so much! for any advice!
Click to expand...
Click to collapse
1st, upgrade to ICS stock 4.0.4
2nd, root it with THIS
And for Q&A, please go to THIS thread
Abigail said:
1st, upgrade to ICS stock 4.0.4
2nd, root it with THIS
And for Q&A, please go to THIS thread
Click to expand...
Click to collapse
Thanks for the reply, with this ROM 2.3.4 ROOT not? I need to upgrade to 4.4? and how it is easy? Thanks
rodrigoh6 said:
Thanks for the reply, with this ROM 2.3.4 ROOT not? I need to upgrade to 4.4? and how it is easy? Thanks
Click to expand...
Click to collapse
rodrigoh6 said:
Thanks for the reply, with this ROM 2.3.4 ROOT not? I need to upgrade to 4.4? and how it is easy? Thanks
Click to expand...
Click to collapse
Please fllow this guide step by step :
1. Upgrade to ICS 4.0.4 first using PC Companion or Sony Update Centre (online update) or via Flashtool (offline update)
2. Unlockbootloader --> CLICK
3. Choose one of Custom ROM. Example u want to use Mike's ROM from his thread --> CLICK
4. Download the ROM --> CLICK and copy to your SDcard
5. Download Gapps from Banks thread --> CLICK and copy to your SDcard
6. Download Flashtool and install for flashing kernel (boot.img)
7. Copy boot.img from point 3 to at C:/Flashtool/firmware
8. Flash the kernel using fastboot mode
Hold and press RIGHT BUTTON and then plug your USB cable, and then u see the Blue led and then flash it using fasboot mode -> flash kernel -> change to .img and click OK
9. After flashing kernel, take the battery for a few second and put it back. Turn on your Iyokan and press the back button repeatly until it show CWM Recovery.
10. Wipe data + wipe cache partition + clear dalvik cache + format data/system/cache and then install zip from sdcard, instal those .zip (ROM and Gapps)
11. Reboot System Now and wait for a while
Sorry for my bad english
Abigail said:
Please fllow this guide step by step :
1. Upgrade to ICS 4.0.4 first using PC Companion or Sony Update Centre (online update) or via Flashtool (offline update)
2. Unlockbootloader --> CLICK
3. Choose one of Custom ROM. Example u want to use Mike's ROM from his thread --> CLICK
4. Download the ROM --> CLICK and copy to your SDcard
5. Download Gapps from Banks thread --> CLICK and copy to your SDcard
6. Download Flashtool and install for flashing kernel (boot.img)
7. Copy boot.img from point 3 to at C:/Flashtool/firmware
8. Flash the kernel using fastboot mode
Hold and press RIGHT BUTTON and then plug your USB cable, and then u see the Blue led and then flash it using fasboot mode -> flash kernel -> change to .img and click OK
9. After flashing kernel, take the battery for a few second and put it back. Turn on your Iyokan and press the back button repeatly until it show CWM Recovery.
10. Wipe data + wipe cache partition + clear dalvik cache + format data/system/cache and then install zip from sdcard, instal those .zip (ROM and Gapps)
11. Reboot System Now and wait for a while
Sorry for my bad english
Click to expand...
Click to collapse
So I just did not want to. I want to do some simple root android 2.3.4 on the original just to delete a few applications that I eat RAM.
It's going to do?
rodrigoh6 said:
So I just did not want to. I want to do some simple root android 2.3.4 on the original just to delete a few applications that I eat RAM.
It's going to do?
Click to expand...
Click to collapse
did you tried unlockroot application .. i tried premium on x10 2.3.4 it worked give it a shot ..
rodrigoh6 said:
So I just did not want to. I want to do some simple root android 2.3.4 on the original just to delete a few applications that I eat RAM.
It's going to do?
Click to expand...
Click to collapse
Unlockroot, framaroot, vroot, kingsroot, theres so many app for root
Abigail said:
Unlockroot, framaroot, vroot, kingsroot, theres so many app for root
Click to expand...
Click to collapse
that works on 2.3.4? and instructions?