I followed this thread to unlock my Evo 3D:
[GUIDE] HTC Unlock Hboot 1.50 + TWRP Recovery + Root + Flash Ur Ass Off! [9.11.11]
http://forum.xda-developers.com/showthread.php?t=1239821
I have:
SHOOTER XC SHIP S-ON RL
HBOOT-1.50.0000
eMMC-boot
Aug 7 2011, 10:21:40
Can someone please tell me how can I get back to Stock to return my phone? I have been unable to do so after hours of trying to follow a few threads here.
rtandon87 said:
I followed this thread to unlock my Evo 3D:
[GUIDE] HTC Unlock Hboot 1.50 + TWRP Recovery + Root + Flash Ur Ass Off! [9.11.11]
http://forum.xda-developers.com/showthread.php?t=1239821
I have:
SHOOTER XC SHIP S-ON RL
HBOOT-1.50.0000
eMMC-boot
Aug 7 2011, 10:21:40
Can someone please tell me how can I get back to Stock to return my phone? I have been unable to do so after hours of trying to follow a few threads here.
Click to expand...
Click to collapse
You should have tried searching before you posted. There are at least 5 threads with people asking how to do this. Also, when you unlocked via htcdev, they told you how to relock your device. So, for the sixth time:
Fastboot oem lock
run the RUU
reboot.
Device will say ***RELOCKED*** at the top of the bootloader
Thank you so much for your help!! I have been searching and trying to do this for so long now. The mistake I was making was that I was trying to run the RUU before doing fastboot oem lock.
So, for others like me who end up on this thread to relock their Evo 3D and bring it back to stock (if you've unlocked using HTCdev method and have S-ON):
*) make sure that you have the adb and fastboot files in the folder you are in.
1) from your command line, run "adb reboot bootloader"
2) On your phone you'll see "Fastboot USB"
2) run "fastboot oem lock"
3) You should now see "RELOCKED" on top.
4) Execute the RUU from your computer (I did - RUU_Shooter_S_Sprint_WWE_2.08.651.3_Radio_0.97.10.0808_NV_SPCS_1.31_003_release_219445_signed.exe)
5) Reboot your phone.
Thank you so much Twolazyg!!
What about the rom?
Does this restore the rom to stock if you loaded a custom rom?
Yes.
Locked & Loaded
""shooter on Deck""
The HTC Unlock method didn't do anything for me and I am preparing to flash the 651.3 RUU so that I can try again.
Does the RUU need to be renamed exactly " PG86IMG.zip " inorder to work (like the radio zips)?
mpgrimm2 said:
The HTC Unlock method didn't do anything for me and I am preparing to flash the 651.3 RUU so that I can try again.
Does the RUU need to be renamed exactly " PG86IMG.zip " inorder to work (like the radio zips)?
Click to expand...
Click to collapse
The bootloader will only scan/load files from the /sdcard if they are placed in the root and labeled PG86IMG.zip.
The RUU .exe can't be placed in the sdcard, the rom.zip file from inside of the RUU has to be extracted, renamed to PG86IMG.zip and placed in the root of the /sdcard.
Good luck!
Thanks for the info JoeyKrim, beginning to wonder if there are too many posts on here for people to notice and respond to. Created another post at Sdx to keep track of what I find out:
Stock Hboot1.50 RUU 651.3 flash question: http://forum.sdx-developers.com/?topic=18852.0
Here's some of the details from there:
(XDA) TwoLazyG's [GUIDE] Unroot your HTC unlocked EVO 3D (Hboot 1.50 & Stock RUU's)
http://forum.xda-developers.com/showthread.php?t=1388501
(XDA) jdeoxys's [How to] Restore evo 3d to latest stock RUU on hboot 1.5
http://forum.xda-developers.com/showthread.php?t=1337379
Update: The long filename did nothing. Changed it to PG86IMG.zip, put it on a blank sdcard and booted to Hboot 1.50. It read the file, checked the file, did some stuff, and then I selected "Reboot" and my phone was still the same as I had set it up.
Q: Do I need to format / factory reset first?
I didn't "Relock" since I never got it "unlocked" and I didn't use adb since it read the zip as soon as Hboot started.
Also: Can't figure out how to load/use adb correctly (win7). Did the HTCdev unlock downloads (see below), located and manually copied the 3 files (adb.exe, AdbWinApi.dll, fastboot.exe) over to c:/android folder. No problems with fastboot stuff. Thought I installed android sdk, java, etc correctly, maybe not.
Copy of Original HTC Unlocking Instructions form HTCdev.com (plus some extra notes) http://forum.xda-developers.com/showthread.php?t=1437684
rtandon87 said:
Thank you so much for your help!! I have been searching and trying to do this for so long now. The mistake I was making was that I was trying to run the RUU before doing fastboot oem lock.
So, for others like me who end up on this thread to relock their Evo 3D and bring it back to stock (if you've unlocked using HTCdev method and have S-ON):
*) make sure that you have the adb and fastboot files in the folder you are in.
1) from your command line, run "adb reboot bootloader"
2) On your phone you'll see "Fastboot USB"
2) run "fastboot oem lock"
3) You should now see "RELOCKED" on top.
4) Execute the RUU from your computer (I did - RUU_Shooter_S_Sprint_WWE_2.08.651.3_Radio_0.97.10.0808_NV_SPCS_1.31_003_release_219445_signed.exe)
5) Reboot your phone.
Thank you so much Twolazyg!!
Click to expand...
Click to collapse
How do you execute the RUU from your computer? Also I've never seen that with a .exe at the end before
Solved - Stock Hboot1.50 HTC Unlock/ RUU 651.3 flash problems
Finally got somewhere with this: Feel free to see the full thread here:
Stock Hboot1.50 HTC Unlock/ RUU 651.3 flash problems http://forum.sdx-developers.com/?topic=18852.msg236519#msg236519
Mpgrimm2; said:
SOLVED (unlocked)
Still not getting anywhere yet with HTC Unlock. Found alternate DL for RUU's and zips (scottsroms) and a how to :
(AndroidCentral) Scrosler's [HOW TO] Return to 100% Stock - All versions!:
http://forums.androidcentral.com/ht...107641-how-return-100-stock-all-versions.html
(ScottsRoms) HTC Evo 3D Stock Roms (RUU's & zips): http://www.scottsroms.com/downloads.php?do=cat&id=4
Apparently the .exe version works from within MsWindows (saw screenshot somewhere) as long as you can boot phone to the android OS with "Debugging" enabled. Otherwise you have to extract the the zip and rename it like JoeyKrim posted above.
Update: Pulled the HTC RUU.exe How to Instructions from the exe file:
HTC Evo3D RUU 651.3 exe Directions.doc : http://www.mediafire.com/?lkryvm4k29hm7g3
The Stock RUU.zip from (ScottsRoms.com) worked once renamed (PG86IMG.zip). It's 400mb vs 399mb for the one from Mr.Esp's post at xda. I put onto sdcard and rebooted to hboot as indicated in Scrosler's post at AndroidCentral from above (see pictures below). May try the exe file another time. Now to try the unlock again. Here's the filenames and MD5's:
RUU_Shooter_S_Sprint_WWE_2.08.651.3_Radio_0.97.10.0808_NV_SPCS_1.31_003_release_219445_signed.zip
MD5: 2E55650E9E3ADF81BCA541F66192E0B0
RUU_Shooter_S_Sprint_WWE_2.08.651.3_Radio_0.97.10.0808_NV_SPCS_1.31_003_release_219445_signed.exe
MD5: 15D8ED1BB45F85FFA687B86966AC0F01
Update2: That worked! Just needed a good Ruu.zip file it seems.
Click to expand...
Click to collapse
Related
Explanations:
Have a Best Buy HTC Flyer with OTA stock HC 3.2 and wanted to downgrade to GB and used this method http://forum.xda-developers.com/showthread.php?t=1307759
Followed all directions from Post #1 to #11 using RUU_Flyer_BrightstarUS_WWE_1.36.1540.32_R_Radio_20 .3501.30.089BU_3809.05.04.10_M_release_191425_sign ed.exe as my RUU.
Ran RUU and HTC flyer pops up with bootloader screen on computer RUU says sending. Let it run max for 2-3hrs. Still saying the same thing. Unplugged it and now getting
FLYER PVT SHIP S-ON RL
HBOOT-1.10.0000
MICROP-0950
RADIO-3809.05.04.10_M
eMMC-boot
May 4 2011,11:04:45
When I select reboot it restarts and boots up the a white screen with HTC in green and stays this way.
When I try running the RUU again it does the same thing, just sits on sending.......
I am able to get to fastboot and hboot screen.
I am able to use flashboot
I am not able to to use adb
When I click recovery it just blinks and boots back up to Hboot so I'm thinking I don't have a recovery.
I tried running HTC unlock website again but I recieve an error when running the flashbook unlock command.
I'm thinking the since I'm S-ON I can't run recovery from flashboot
Please help......
As I understand from your post, you were S-ON on GB, ran OTA, and were on S-ON HC, right ?
HAVE YOU TRIED THIS THREAD FIRST ?
http://forum.xda-developers.com/showthread.php?t=1428104
Ok, what was your INITAL hBoot version ?
Good explanation. I've seen threads where people go:
i flashed ledroid hc on me gb flyer. it bricked it plz halp!
jaguaralani said:
As I understand from your post, you were S-ON on GB, ran OTA, and were on S-ON HC, right ?
HAVE YOU TRIED THIS THREAD FIRST ?
http://forum.xda-developers.com/showthread.php?t=1428104
Ok, what was your INITAL hBoot version ?
Click to expand...
Click to collapse
I was on stock OTA HC with S-ON. And wanted to go to back to GB.
rkum19 said:
Explanations:
Have a Best Buy HTC Flyer with OTA stock HC 3.2 and wanted to downgrade to GB and used this method http://forum.xda-developers.com/showthread.php?t=1307759
Followed all directions from Post #1 to #11 using RUU_Flyer_BrightstarUS_WWE_1.36.1540.32_R_Radio_20 .3501.30.089BU_3809.05.04.10_M_release_191425_sign ed.exe as my RUU.
Ran RUU and HTC flyer pops up with bootloader screen on computer RUU says sending. Let it run max for 2-3hrs. Still saying the same thing. Unplugged it and now getting
FLYER PVT SHIP S-ON RL
HBOOT-1.10.0000
MICROP-0950
RADIO-3809.05.04.10_M
eMMC-boot
May 4 2011,11:04:45
When I select reboot it restarts and boots up the a white screen with HTC in green and stays this way.
When I try running the RUU again it does the same thing, just sits on sending.......
I am able to get to fastboot and hboot screen.
I am able to use flashboot
I am not able to to use adb
When I click recovery it just blinks and boots back up to Hboot so I'm thinking I don't have a recovery.
I tried running HTC unlock website again but I recieve an error when running the flashbook unlock command.
I'm thinking the since I'm S-ON I can't run recovery from flashboot
Please help......
Click to expand...
Click to collapse
put it in fastboot mode and run the RUU again.
from fastboot
fastboot oem rebootRUU
Run stock ruu (only if you have the exe)
do you have the ruu.exe or just the zip?
if its just the zip make sure you run cmd with administrator rights and make sure the ruu zip is in the directory where your fastboot resides. on a windows 7 box (Program Files (x84)/Android/android-sdk/platform-tools)
then:
fastboot flash zip ruu_zip_name.zip
Good luck
wranglerray said:
from fastboot
fastboot oem rebootRUU
Run stock ruu (only if you have the exe)
do you have the ruu.exe or just the zip?
if its just the zip make sure you run cmd with administrator rights and make sure the ruu zip is in the directory where your fastboot resides. on a windows 7 box (Program Files (x84)/Android/android-sdk/platform-tools)
then:
fastboot flash zip ruu_zip_name.zip
Good luck
Click to expand...
Click to collapse
This should work for you, I had similar issues, and had to run fastboot commands to get it loaded right. This is the best explanation I've seen, should be added somewhere in the pinned docs.
Also you may have another option.
hboot 1.10.0000 is a stock hboot for the BB wifi flyer.
From fastboot you should be able to run revolutionary to gain s-off irregardless of your rom state. after you have s-off its just a matter of do you want HC or GB.
You can always relock the bootloader once you have a working rom again.
I have the HC s-off ruu. its buried in a thread somewhere but i'd be happy to host it somewhere so you could download it.
wranglerray said:
Also you may have another option.
hboot 1.10.0000 is a stock hboot for the BB wifi flyer.
From fastboot you should be able to run revolutionary to gain s-off irregardless of your rom state. after you have s-off its just a matter of do you want HC or GB.
You can always relock the bootloader once you have a working rom again.
I have the HC s-off ruu. its buried in a thread somewhere but i'd be happy to host it somewhere so you could download it.
Click to expand...
Click to collapse
None of that is correct.
Is it just me or is the last post from the person with the issue from March 6th?
Sent from my HTC Flyer P510e using xda premium
mcord11758 said:
Is it just me or is the last post from the person with the issue from March 6th?
Sent from my HTC Flyer P510e using xda premium
Click to expand...
Click to collapse
Yes, you're correct. I only replied to the thread to make sure the incorrect infomation didn't waste anyones time.
So I rooted my HTC Rezound a months ago, since ICS didn't launch when I wanted it to lol..Any way I decided I want to unroot my phone so I can trade it in on a new one. I followed the guidelines a user posted on XDA to the T and I keep getting either a message failed my version is newer or older than the one im installing? I did however download a ICS fake update before I rooted and wasn't sure if that has anything to do with it. As of right now I am stuck in the Bootloader screen I can not do anything. Please help, I need this phone for work since I am supposed to be On Call everyday. If you need any numbers from the bootloader screen I am sure I have them memorized lol.
Unrooting Guide I followed
Was here in XDA
The easiest way I've found to re-lock your rezound is to download the attached "tools.zip" and extract to your desktop.
Boot your rezound into fastboot by removing your battery, putting the battery back in, holding down on the volume rocker and power. Then plug your rezound into your computer. Assuming you used your computer to unlock the rezound then you should already have the required drivers.
Open command prompt and enter the following:
cd C:\Users\[Your Name Here]\desktop\tools
Then run the command
fastboot oem lock
Your bootloader is now locked and ready to begin restoring stock recovery and rom from Stock RUU.
2. Downloading the stock RUU
*Will Update As New RUU's Are Released*
2.02.605.11 STOCK RUU EXE
download
1.02.605.6 STOCK RUU EXE
download
(will add PH98IMG.zip download for 2nd method soon)
You can do this one of two ways. You can use the exe ruu which i like to use, its simple straight forward and guides you through the process
-or-
Extract the RUU zip from the exe or download from XDA its all over.
Rename the zip PH98IMG.ZIP put on root of SD card and boot into HBOOT hit
yes with appropriate volume key and let it do its thing.
I personaly perfer running the exe. Makes life easy. But whatever floats your boat.
SIDE NOTE: IF YOU WISH TO ROOT AGAIN
the one click root tool might not work properly and will not have proper permision to install SU, If this happens flash amon through fastboot. And under development section install su / superuser, you are now rooted again
Credit for user cotribution:
DrSadistic ( Fastboot section )
***this was a quick write up so if you think anything should be added or removed, or there is some wrong information let me know so i can fix it***
VIGOR PUT SHIP S-ON RL
HBOOT-2.25.0000
RADIO-1.22.10.0421r/1.22.10.0424r
OpenDSP-v13.6.0.7611.00.0104
eMMC-boot
Apr 12 2012, 16:47:46
This is what is on my Rezound
krayz22 said:
VIGOR PUT SHIP S-ON RL
HBOOT-2.25.0000
RADIO-1.22.10.0421r/1.22.10.0424r
OpenDSP-v13.6.0.7611.00.0104
eMMC-boot
Apr 12 2012, 16:47:46
This is what is on my Rezound
Click to expand...
Click to collapse
Looks like you have ICS installed.
That tutorial was for Gingerbread.
Just flash the 3.14.605.12 RUU.
i rooted my girlfriends sprint evo 3d using unknownforce's down grade method, i wanna return her phone back to complete stock how would i do that? she is s-off right now. thanks for the advice
You could flash an ruu from bootloader since your s-off. Here's a link for a list of ruu pick the one that says ics shooter 35 s 2.89 1.09.00.0706 spcs wwe to that nature http://www.filefactory.com/f/4ef0ef536face67a/. Just remember to rename the file PG86IMG in all caps and place on the root of your sdcard. Power down your phone, and boot up into bootloader and let your phone detect the file and confirm to update. Next you might want to get a drink or something to eat. It'll take like 10 minutes. Hope that helps
Jsparta26 said:
You could flash an ruu from bootloader since your s-off. Here's a link for a list of ruu pick the one that says ics shooter 35 s 2.89 1.09.00.0706 spcs wwe to that nature http://www.filefactory.com/f/4ef0ef536face67a/. Just remember to rename the file PG86IMG in all caps and place on the root of your sdcard. Power down your phone, and boot up into bootloader and let your phone detect the file and confirm to update. Next you might want to get a drink or something to eat. It'll take like 10 minutes. Hope that helps
Click to expand...
Click to collapse
that will revert the s-off to right?
wikedone said:
that will revert the s-off to right?
Click to expand...
Click to collapse
No.
You need to issue the "fastboot oem writescureflag 3" command with the phone in fastboot USB mode after flashing the RUU to reset the S-OFF status to S-ON. Make sure you have the stock bootloader installed before you do that.
ramjet73
ramjet73 said:
No.
You need to issue the "fastboot oem writescureflag 3" command with the phone in fastboot USB mode after flashing the RUU to reset the S-OFF status to S-ON. Make sure you have the stock bootloader installed before you do that.
ramjet73
Click to expand...
Click to collapse
ok the file i downloaded is RUU_Shooter_ICS_35_S_Sprint_WWE_2.89.651.2_Radio_1.09.00.0706__NV_NV_SPCS_1.43_release_271101_signed.exe i just rename that to PG86IMG or what cuz when i run the ruu in windows it errors out with usb connectio error
wikedone said:
ok the file i downloaded is RUU_Shooter_ICS_35_S_Sprint_WWE_2.89.651.2_Radio_1.09.00.0706__NV_NV_SPCS_1.43_release_271101_signed.exe i just rename that to PG86IMG or what cuz when i run the ruu in windows it errors out with usb connectio error
Click to expand...
Click to collapse
The .exe version of the RUU needs to be run from Windows. Make sure your phone is in the "fastboot usb" mode in the bootloader and the "fastboot devices" command returns your serial number before you run the RUU.
There's also a .zip version of the RUU around somewhere on these forums that can be run from the bootloader, but I don't have a link to that. It would be safer to extract it yourself from the RUU.exe using this procedure.
ramjet73
ramjet73 said:
The .exe version of the RUU needs to be run from Windows. Make sure your phone is in the "fastboot usb" mode in the bootloader and the "fastboot devices" command returns your serial number before you run the RUU.
There's also a .zip version of the RUU around somewhere on these forums that can be run from the bootloader, but I don't have a link to that. It would be safer to extract it yourself from the RUU.exe using this procedure.
ramjet73
Click to expand...
Click to collapse
ok i got the ruu to run and the phone is updated to ICS the hboot says
*** LOCKED ***
SHOOTER XC SHIP S-OFF RL
HBOOT-1.58.0000
RADIO-1.09.00.0706
OpenADSP-v02.6.0.2226.00.0217
eMMC-boot
May 17 2012, 15:06:44
How do i know if i have the stock bootloader so i can Make it S-On
wikedone said:
ok i got the ruu to run and the phone is updated to ICS the hboot says
*** LOCKED ***
SHOOTER XC SHIP S-OFF RL
HBOOT-1.58.0000
^^^^^^^^^^^
How do i know if i have the stock bootloader so i can Make it S-On
Click to expand...
Click to collapse
That's the stock bootloader, which was installed by the RUU. Most of the custom bootloaders (Revolutionary, Juopunutbear) have their name where the "*** LOCKED ***" status shows on your phone.
ramjet73
It's also courtesy to hit the thank you button when someone has helped you (meaning ramjet) Just thought I would throw that out.
Hello,
I've got a problem with an htc evo 3d gsm with this features:
***Relocked***
Shooter_U PVT SHIP S-ON RL
HBOOT-1.53.0007
RADIO-11.25.3504.06_M
OpenDSP-v02.6.0.2226.00.0202
eMMC-boot
May 22 2012
and i've tryed to root this device by this guide.
but it entered on bootloop, so on point 7) -3 there is a note by tell if you get on bootloop you have to do the procedure again but i do it and nothing changes...Also, before flashing a new rom, everything was ok...
so i decided to restore a previously backup but the bootloop continue .
My next step was to restore the Original state of the phone with RUU.exe by this guide but it doesn't work ....now i havn't got any idea how to restore phone....
so please help me , and sorry sorry for my BAD english.
You have to flash the boot.img using fastboot commands. In that guide he doesnt tell you that. It is required for s-on devices.
first of all extract the boot.img file located in the rom zip file (usually in the kernelshooteru folder) and transfer it to the folder on your pc where you have adb/fastboot. then on your phone:
1) wipe data/factory reset
2) wipe cache
3) wipe delvik
4) flash rom from sdcard
5) connect your usb then reboot to bootloader and choose fastboot. It should say "fastboot usb"
6) go to cmd(navigate to your fastboot/adb directory) and type "fastboot flash boot boot.img"
7) reboot
---------- Post added at 09:35 PM ---------- Previous post was at 09:29 PM ----------
As for the RUU are you sure you didnt download a cdma ruu? cause that guide is certainly for a cdma device, the link to the RUUs is for cdma
get gsm RUU from here:
http://forum.xda-developers.com/showthread.php?t=1208485
Nothing but now it show for a few second the label "HTC" and after he reboot I'm trying to redownload a different RUU version
I have the same issue...
Bootlooping after I did a ROM update.
I only have access to the SD card and there is nothing on it such as a rom.zip file or any system files like that. I need to get a new bootloader I think. Where do I find one for the 3D?
I have tried to use a couple I found but they did not work.
Thanks.
First of all relock your bootloader. Then download your RUU from the apppropriate place. If you are a gsm user get it from here: http://forum.xda-developers.com/showthread.php?t=1208485
Which evo 3d do you have? brand country of purchase etc. If its unbranded you should run the European ICS RUU
connect your phone in bootloader mode and run the RUU exe file from pc
EM|NEM said:
First of all relock your bootloader. Then download your RUU from the apppropriate place. If you are a gsm user get it from here: http://forum.xda-developers.com/showthread.php?t=1208485
Which evo 3d do you have? brand country of purchase etc. If its unbranded you should run the European ICS RUU
connect your phone in bootloader mode and run the RUU exe file from pc
Click to expand...
Click to collapse
Thank you for the reply,
I have a U.S. based Sprint EVO 3D which is CDMA I think.
EM|NEM said:
First of all relock your bootloader. Then download your RUU from the apppropriate place. If you are a gsm user get it from here: http://forum.xda-developers.com/showthread.php?t=1208485
Which evo 3d do you have? brand country of purchase etc. If its unbranded you should run the European ICS RUU
connect your phone in bootloader mode and run the RUU exe file from pc
Click to expand...
Click to collapse
Where does one find RUU.exe? I have unzipped a stock rom file and I don't see an executable anywhere.
This is a good guide to flashing RUUs for your CDMA sprint
http://forum.xda-developers.com/showpost.php?p=22489299&postcount=3
He has linked all the RUU's
Hi,
Device: Flyer Wifi 16gb
HBOOT: 6.11.1111
Revolutionary S-OFF
No Root (apparently by Root Checker Basic)
3.2.1 RUU
i followed this guide:
http://forum.xda-developers.com/showpost.php?p=19339909&postcount=1
to regain S-ON and standard recovery. Unfortunately it didnt work, I installed the RUU, it boots and works fine but if I send the devices to bootloader via ADB it lands back in Revolutionary. The guide was completed without errors.
So I am currently on RUU but with S-OFF and Revolutionary and I would like to get S-ON and standard recovery.
I found several other guides, but I cant see what puts them above the mentioned one and therefore I prefer to ask...
Thank you very much in advance for any help,
P32r
More
For example this:
http://forum.xda-developers.com/showthread.php?t=1257909
just ends in that:
http://forum.xda-developers.com/showpost.php?p=16147471&postcount=77
and that holds for everything I found.
Somebody said I could just use fastboot and send "fastboot oem lock" for the lock and RUU afterwards. But am I right that HBOOT is not replaced by RUU at all? Do I have to downgrade first?
p32r said:
For example this:
http://forum.xda-developers.com/showthread.php?t=1257909
just ends in that:
http://forum.xda-developers.com/showpost.php?p=16147471&postcount=77
and that holds for everything I found.
Somebody said I could just use fastboot and send "fastboot oem lock" for the lock and RUU afterwards. But am I right that HBOOT is not replaced by RUU at all? Do I have to downgrade first?
Click to expand...
Click to collapse
the RUU flash will not write over a S Off Hboot. the procedure you listed in the OP is the only one I know of that will do what you want. Are you sure that when you:
fastboot flash hboot flyer_downgrader.nb0
it was successful?
pic
Thank you for your help!
I attached the output of fastboot and I actually dont think that it flashes correctly but all I saw is "OKAY" and "finished"...
Is the screen supposed to show anything during this flash? Because it stays just the way it is and shows no change in HBOOT or any part of the fastboot screen.
After rebooting it says "HBOOT-6.10.1005" but revolutionary still.
Great Success!
Got it! Works with RUU
RUU_Flyer_HTC_WWE_Wifi_1.36.1114.32_Radio_20.3501.30.089BU_3809.05.04.10_M_release_191235_signed
and NOT with the one I used. With this RUU I did the exact same procedure and succeeded. Now on stock recovery, S-ON and 1.10.0000!
Thank you for the guide, it really does work