[KERNEL][SENSE] Ziggy471 Vigor GB Kernel - HTC Rezound

NOTE: If you have issues with WiFi, IT IS NOT DUE TO THE KERNEL, but due to the ROM you are running.
The kernel is now online....sorry, was working on a new server for us, we should have a ROM here soon too.
Features:
Low Power BCM Bluetooth mode
Backported 2.6.38 autogroup
Backported 2.6.38 ck3 patchset
Lagfree governor with fully functioning sysfs
Overclocked to 1.83GHz
Slight under-volting
In-Call recording
Sysfs vdd interface
Properly scales second processor without perflock and using stock mpdecision
Kernel
Z

saved..............

Ziggy's at it again, can't wait till we can test this!
Sent from my Xoom using xda premium

Already a great start! Just need s-off and ill be happy to give this one a run.
Sent from my ADR6425LVW using xda premium

Can't wait for soff. This sounds sweet
Sent from my ADR6425LVW using XDA App

making me jealous i don't have s-off i even powered off to check again when i saw this post

Ahhhhhhhh....Zigfy no **** brotha LOL....here we go fellas. Were just gettin started. Thanks man. Just made my night
Sent from my ADR6425LVW using Tapatalk

how high do you think the vigor can OC to stable??

combatmedic870 said:
how high do you think the vigor can OC to stable??
Click to expand...
Click to collapse
the most i've seen any msm8660 device overclocked it 1.99 ghz which is what vigor has

JoelZ9614 said:
the most i've seen any msm8660 device overclocked it 1.99 ghz which is what vigor has
Click to expand...
Click to collapse
but you guys are awesome! we gotta get 2.0 stable!!!

combatmedic870 said:
but you guys are awesome! we gotta get 2.0 stable!!!
Click to expand...
Click to collapse
Shouldn't be a problem, I'll start playing some more with it, I'm sure Virus will be happy too, since it's the same processor on the 3D.
Z

ziggy471 said:
Shouldn't be a problem, I'll start playing some more with it, I'm sure Virus will be happy too, since it's the same processor on the 3D.
Z
Click to expand...
Click to collapse
Do u got one Zigg? Or are u just Devin for it? Man this a great news!
Sent from my ADR6425LVW using Tapatalk

ziggy471 said:
Shouldn't be a problem, I'll start playing some more with it, I'm sure Virus will be happy too, since it's the same processor on the 3D.
Z
Click to expand...
Click to collapse
that would be sweet, i read that its only stable to 1.7.....thats what everyone keeps telling me as well. I dont think ive seen a phone yet hit the 2.0 barrier on a dual core!
what are the steps you use on your kernel. I know the stock goes from 1.18 straight to 1.5. did you change that so it atleast has 1.2,1.3 and 1.4? it also goes from 192 straight to 384. do you add a 200 in there at all. I think that would help with power savings. especially when it comes to haves a screen off profile. The phone gets a little laggy when you have it set to just 192mhz for screen off. its better when its 192-384mhz. But having a 290 or something in there would help out im sure and save a little bit of juice due to being able to set it to 192-290 or what not.
just wondering. i thought the stock kernel on the phone was a little odd in them regards. it really likes 1.5 and really hates 192mhz.

Yeah i haven't been able to get the evo 3d s3 to overclock past 1.7 without rebooting.
Sent from my ADR6425LVW using xda premium

fernando sor said:
Yeah i haven't been able to get the evo 3d s3 to overclock past 1.7 without rebooting.
Sent from my ADR6425LVW using xda premium
Click to expand...
Click to collapse
Well everyone's device handled the OC differently right? Like I was able to get up to 1.83 with no reboots, where some couldn't get above say 1.7 .....it seems as if some of the devices out there had higher capabilitys than others.
Sent from my ADR6425LVW using Tapatalk

fernando sor said:
Yeah i haven't been able to get the evo 3d s3 to overclock past 1.7 without rebooting.
Sent from my ADR6425LVW using xda premium
Click to expand...
Click to collapse
reverepats said:
Well everyone's device handled the OC differently right? Like I was able to get up to 1.83 with no reboots, where some couldn't get above say 1.7 .....it seems as if some of the devices out there had higher capabilitys than others.
Sent from my ADR6425LVW using Tapatalk
Click to expand...
Click to collapse
It all boils down to voltage, some devices require more voltage than others, some require less. My 3D handles 1.83 all day long, but I had 3D's running at 1.83 LONG before I even had one, remember, I'm on Verizon.
Z

ziggy471 said:
It all boils down to voltage, some devices require more voltage than others, some require less. My 3D handles 1.83 all day long, but I had 3D's running at 1.83 LONG before I even had one, remember, I'm on Verizon.
Z
Click to expand...
Click to collapse
Well good to have you on the rezound zigg
Sent from my ADR6425LVW using xda premium

reverepats said:
Well everyone's device handled the OC differently right? Like I was able to get up to 1.83 with no reboots, where some couldn't get above say 1.7 .....it seems as if some of the devices out there had higher capabilitys than others.
Sent from my ADR6425LVW using Tapatalk
Click to expand...
Click to collapse
Yeah I noticed some stated they could clock to that
Sent from my ADR6425LVW using xda premium

You would think duel cores would be more overclockable... I can oc my Inc2 to 1.8 all day long and be stable... But I run stock speeds anyways so no biggy, but ill definatly be using zigs kernels in my roms...
Sent from my Htc Rezound using taptalk pro

ziggy471 said:
It all boils down to voltage, some devices require more voltage than others, some require less. My 3D handles 1.83 all day long, but I had 3D's running at 1.83 LONG before I even had one, remember, I'm on Verizon.
Z
Click to expand...
Click to collapse
Jeez I didn't even know you were on Verizon the entire time. I thought u were on sprint LOL...ahh well. Pretty stoked about this.
Sent from my ADR6425LVW using Tapatalk

Related

Overclock?

So... lets get this thing OC'd, eh? =)
Odinist said:
So... lets get this thing OC'd, eh? =)
Click to expand...
Click to collapse
I don't think that anyone has developed a kernel that allows overclocking yet.
Haha not just yet, we need some kernel devs first
Sent from my ADR6300 using XDA Premium App
lp4261 said:
I don't think that anyone has developed a kernel that allows overclocking yet.
Click to expand...
Click to collapse
Yeah, I figured that's what we're waiting on, I just felt like being impatient today though. ;-)
If its like the inspire, you can get to 1.6 easily on it stable.
Hope its like the g2 then we could hit 2 ghz
Sent from my ADR6300 using XDA Premium App
Can start once HTC releases the source packages which might be next week - could be a month - but we're at their mercy.
I'm really looking forward to seeing what overclock speeds we can get out of this.
I find it funny that we all want overclock for it tho. What can't we do with our phones right now that a 2ghz overclock will fix? ...I think I just like knowing its there.
Sent from my ADR6400L using XDA App
I honestly want to do it for the hellavait
Sent from my ADR6300 using XDA Premium App
superchilpil said:
I honestly want to do it for the hellavait
Sent from my ADR6300 using XDA Premium App
Click to expand...
Click to collapse
Me too, nice to push limits of the device to know what it can handle
no way i wanna oc this thing to the limit. maybe just once but the battery already sucks....
b33zy682 said:
no way i wanna oc this thing to the limit. maybe just once but the battery already sucks....
Click to expand...
Click to collapse
Alot of overclocks on previous phones used lower voltage...which gave us LONGER batt life.
b33zy682 said:
no way i wanna oc this thing to the limit. maybe just once but the battery already sucks....
Click to expand...
Click to collapse
Smartass scaling and undervolt go a long way for improved battery life.
Can any developer explain how it is possible to make a CPU faster and more effecient on battery, and why don't the manufacturers just do this before they sell it?
I understand the basics of how kernels work, but I wouldn't think you could safely double the speed of a processor while keeping it undervolted (coming from the d1)
Do they purposely underclock the kernel and used the same processors in "new" "faster" phones?
Sent from my ADR6400L using XDA App
suzook said:
Alot of overclocks on previous phones used lower voltage...which gave us LONGER batt life.
Click to expand...
Click to collapse
hell yes! my eris gets 3 days @ 768mhz XD
HTC has to release it by April 2nd I believe bc of OpenGL agreement
Sent from my ADR6400L using XDA Premium App
mycomputerisjunk said:
Smartass scaling and undervolt go a long way for improved battery life.
Click to expand...
Click to collapse
Very true. The Thunderbolt is my tenth Android phone since November 09, and in every single case, scaling and undervolting have made worlds of difference in battery life as well as speed. I'm sure that things won't be any different on the Thunderbolt. Of course, the other thing that makes a huge difference is not playing with it for hours on end. New toys always drain batteries pretty fast.
gregdalfonso said:
Can any developer explain how it is possible to make a CPU faster and more effecient on battery, and why don't the manufacturers just do this before they sell it?
I understand the basics of how kernels work, but I wouldn't think you could safely double the speed of a processor while keeping it undervolted (coming from the d1)
Do they purposely underclock the kernel and used the same processors in "new" "faster" phones?
Sent from my ADR6400L using XDA App
Click to expand...
Click to collapse
Part if it is what the industry calls "yield", that is just because they produce 10,000 1.5ghz cpu's in a batch, doesn't mean all 10,000 can run at 1.5ghz safely and stable, so manufacturers have to go with the fastest common speed In order to not waste those processesors that can't handle the full speed. Its the same thing with computers and videocards.
Sent from my GT-I9000 using Tapatalk
mycomputerisjunk said:
Smartass scaling and undervolt go a long way for improved battery life.
Click to expand...
Click to collapse
Yeah!! This is what I am looking forward to.... not the overclocking but better efficiency
bmcclure937 said:
Yeah!! This is what I am looking forward to.... not the overclocking but better efficiency
Click to expand...
Click to collapse
Definitely.
I have noticed so far that running SetCPU for just the scaling now is helping with my battery life, so that's at least a bit of awesome.

Performance after S-off and root

Been noticing ever since performing S off and rooting my evo 3d every custom rom i flash still gets the same benchmark results with quadrant,linpack, and smartbench or worse then running stock. Even with running Rc Mix overclock kernel with numerous roms and setting clock speed to 1.5 and 1.7 gighrz oc benchmark numbers are significantly worse then stock. I know these tests are pretty much for bragging rights and not real world usage,but coming from an inspire 4g when i oced to over 1.5 was getting 3000+ on quadrant.
Sent from my PG86100 using XDA Premium App
I haven't looked too deep into it, but I've noticed some rooted devices around here pushing 7500 on CF-bench which is much more than the SGSII and over 3000 as well on quadrant.
Scores will continue to significantly increase once we have an AOSP rom/CM with more optimized kernels.
Use setcpu and set both sliders to Max and governor to performance and retest
Sent from my PG86100 using XDA Premium App
agreed
I noticed a huge performance drop after s-off, now i am s- on and my wildfire is running grate
abnkamal said:
I noticed a huge performance drop after s-off, now i am s- on and my wildfire is running grate
Click to expand...
Click to collapse
S-OFF and S-ON have NOTHING to do with the performance of your phone.
tgruendler said:
S-OFF and S-ON have NOTHING to do with the performance of your phone.
Click to expand...
Click to collapse
He is Correct. S-OFF means that the NAND portion of the device is unlocked and can be written to. The default setting for HTC’s devices is S-ON, which means that neither can you access certain areas of the system nor can you guarantee a permanent root. Furthermore, signature check for firmware images is also ensured by the S-ON flag.
S on, s off... Nothing to do with phones performance!
Sent from my PG86100 using xda premium
tgruendler said:
S-OFF and S-ON have NOTHING to do with the performance of your phone.
Click to expand...
Click to collapse
dragonpassion said:
S on, s off... Nothing to do with phones performance!
Sent from my PG86100 using xda premium
Click to expand...
Click to collapse
Echo
Sent from my PG86100 using xda premium

Do you overclock?

What's up everyone?
Just wanting to see if people have been able to overclock past 1.8 successfully. And by that I mean no lag, reboots, and runs faster then 1.2 lol. I remember with the OG Evo that 1.19 was more or less the most you could get out of the phone. I can get to 1.8 on most overclocking kernels, just wondered if anyone got higher. I personally use net's kernel, silverneedle, and I must say it's rather nice.
And no, this isn't supposed to be an overclocking vs. not overclocking type of thread (sorry trolls :]). People are going to overclock because it's fun.
Bamba1260 said:
What's up everyone?
Just wanting to see if people have been able to overclock past 1.8 successfully. And by that I mean no lag, reboots, and runs faster then 1.2 lol. I remember with the OG Evo that 1.19 was more or less the most you could get out of the phone. I can get to 1.8 on most overclocking kernels, just wondered if anyone got higher. I personally use net's kernel, silverneedle, and I must say it's rather nice.
And no, this isn't supposed to be an overclocking vs. not overclocking type of thread (sorry trolls :]). People are going to overclock because it's fun.
Click to expand...
Click to collapse
I've messed around some, I can get 1.83 stable for daily use. My phone will reboot 100% of the time using CF bench at that speed, but never with any other app.
Sent from my PG86100 using Tapatalk
2050 here buzzing by
Sent from my PG86100 using XDA App
That's awesome! Rom/kernal, if I may?
havent tried more than 1.7, running 1.5 now, for what i use the phone for i have no need to go any higher really.
2k4mach said:
havent tried more than 1.7, running 1.5 now, for what i use the phone for i have no need to go any higher really.
Click to expand...
Click to collapse
Same here, I run at 1.5 all day.
mine rebooted at 1.8 with rcmix
Bamba1260 said:
That's awesome! Rom/kernal, if I may?
Click to expand...
Click to collapse
Synergy,rcmix 2.0
Was on mag's rom with same
Sent from my PG86100 using XDA App

Best over/underclock app for Amaze?

Hey all,
There are a good amount of choices on the marketplace now for overclocking and underclocking.
I've never had to use an app on my Nexus One running CM7.1 because it came with the ROM.
Anyone have experience with the Amaze specifically and these apps?
When I read through the comments on market, it seems like every cpu app works with varying results depending on what brand/model phone you have.
Figured I would ask XDA peeps before purchasing or even trying an app that could cause some serious issues with my amazing Amaze
Sent from my htc Amaze 4g running BeastMOD v1.1.0
SetCPU has always been my favorite.
TheSneakerWhore said:
SetCPU has always been my favorite.
Click to expand...
Click to collapse
Cool... Good to know
Are you having any issues with it on the Amaze? And what rom are you using?
Thanks
Ps - effing hilarious picture in the amazing picture thread haha (the drunk one to be specific)
Sent from my htc Amaze 4g running BeastMOD v1.1.0
TMAC 13 said:
Cool... Good to know
Are you having any issues with it on the Amaze? And what rom are you using?
Thanks
Ps - effing hilarious picture in the amazing picture thread haha (the drunk one to be specific)
Sent from my htc Amaze 4g running BeastMOD v1.1.0
Click to expand...
Click to collapse
Overclocking is currently not possible.
We need the kernel source which hasn't been released yet.
Sent from my HTC Amaze 4G using xda premium
correct,
i tried with setCPU,
i can only down clock ,
furyagain said:
correct,
i tried with setCPU,
i can only down clock ,
Click to expand...
Click to collapse
And underclocking is essentially useless
Sent from my LG-E739 using Tapatalk
sportsinger75 said:
And underclocking is essentially useless
Sent from my LG-E739 using Tapatalk
Click to expand...
Click to collapse
Is that a fact...?
Helped save a ton of battery on my n1 - and we all know the amaze could use a little help in that category.
@binary - and we also need s-off to flash kernels? I'm learning lol
Sent from my htc Amaze 4g running BeastMOD v1.1.0
The only thing I see helping us is possibly under volting. At least for now.
Sent from my HTC Amaze 4G using xda premium
Its not useless. Setting the Max Freq to something lower truely saves juice
We actually could overclock without source by using kernel modules, but that's not really the best way to do it. I'd rather wait for a custom kernel.
gravis86 said:
We actually could overclock without source by using kernel modules, but that's not really the best way to do it. I'd rather wait for a custom kernel.
Click to expand...
Click to collapse
THIS is what will need to happen to truly take advantage of OC/UV.
SetCPU has been my standard for a while now.

Overclocking issues

I'm currently on The Unofficial v1.5 and supposedly it supports overclocking up to 1.9 ghz. Has anyone else using this rom noticed that when you raise the clock speed that high it just reboots constantly? Its supposed to be able to support it, so have I done something wrong?
Sent from my SAMSUNG-SGH-I717 using xda premium
tmb993 said:
I'm currently on The Unofficial v1.5 and supposedly it supports overclocking up to 1.9 ghz. Has anyone else using this rom noticed that when you raise the clock speed that high it just reboots constantly? Its supposed to be able to support it, so have I done something wrong?
Sent from my SAMSUNG-SGH-I717 using xda premium
Click to expand...
Click to collapse
Most kernels say 1.9 but u should stay at 1.83. 1.9 creates bootloop
Sent from my SAMSUNG-SGH-I717 using xda premium
Yes...it does bootloop alot at that speed.. the safest speed is 1.83 or even 1.89 that's plenty of enough speed without any problems...
tmb993 said:
I'm currently on The Unofficial v1.5 and supposedly it supports overclocking up to 1.9 ghz. Has anyone else using this rom noticed that when you raise the clock speed that high it just reboots constantly? Its supposed to be able to support it, so have I done something wrong?
Sent from my SAMSUNG-SGH-I717 using xda premium
Click to expand...
Click to collapse
1.94 os max speed if u read it says 1.83 stable
sent from team perfections ics rom
The max speed on any device is always unstable. Actually most of the time the top two or three speeds ar always unstable. It also depends on the device too. My Note and your Note may not be stable at the same speed and the rom has nothing to do with it, its the chip in your phone. I remember I had a Touch Pro 2 once that most people could only over clock to 710MHz but a few of us could overclock to 786MHz. I have my Note running pretty stable at 1836 but I have seen some people complaing about bootloops at that speed so it really depends on your device. Remeber when testing out clock speeds make sure that you never check "Apply At Boot" in case the speed is not stable and only check it when you find a stable speed. Her's a video of someone running stable at 1890MHz
http://www.youtube.com/watch?v=g4hd5jG1ztc
porkenhimer said:
The max speed on any device is always unstable. Actually most of the time the top two or three speeds ar always unstable. It also depends on the device too. My Note and your Note may not be stable at the same speed and the rom has nothing to do with it, its the chip in your phone. I remember I had a Touch Pro 2 once that most people could only over clock to 710MHz but a few of us could overclock to 786MHz. I have my Note running pretty stable at 1836 but I have seen some people complaing about bootloops at that speed so it really depends on your device. Remeber when testing out clock speeds make sure that you never check "Apply At Boot" in case the speed is not stable and only check it when you find a stable speed. Her's a video of someone running stable at 1890MHz
http://www.youtube.com/watch?v=g4hd5jG1ztc
Click to expand...
Click to collapse
Ur right its called a hot reboot
sent from team perfections ics rom
Thanks guys. Been running solid at 1.83 ghz. Min around 702 MHz. Battery lasts almost all day. Anyone found better settings for battery life?
Sent from my SAMSUNG-SGH-I717 using xda premium
tmb993 said:
Thanks guys. Been running solid at 1.83 ghz. Min around 702 MHz. Battery lasts almost all day. Anyone found better settings for battery life?
Sent from my SAMSUNG-SGH-I717 using xda premium
Click to expand...
Click to collapse
Yes. Leave it at 1.5max and 192min. If you're not doing anything that requires oc'ing, why set it high.
would that cm9 1.5 ?
if so , where are you over clocking from ?
babymatteo said:
Yes. Leave it at 1.5max and 192min. If you're not doing anything that requires oc'ing, why set it high.
Click to expand...
Click to collapse
It runs sooo much smoother overclocked. But ill try what you said.
Sent from my SAMSUNG-SGH-I717 using xda premium
tmb993 said:
Thanks guys. Been running solid at 1.83 ghz. Min around 702 MHz. Battery lasts almost all day. Anyone found better settings for battery life?
Sent from my SAMSUNG-SGH-I717 using xda premium
Click to expand...
Click to collapse
384 min 1836 max is the best one use lagfree on setcpu
sent from team perfections ics rom
JB calhoun said:
384 min 1836 max is the best one use lagfree on setcpu
sent from team perfections ics rom
Click to expand...
Click to collapse
Is it true that 384 is the minimum samsungs can run? I used to have my atrix down to 192 and it worked fine (tegra 2)
Sent from my SAMSUNG-SGH-I717 using XDA
erick161 said:
Is it true that 384 is the minimum samsungs can run? I used to have my atrix down to 192 and it worked fine (tegra 2)
Sent from my SAMSUNG-SGH-I717 using XDA
Click to expand...
Click to collapse
No it can go down to 192
Sent from my SAMSUNG-SGH-I717 using xda premium
Just a tip if you overclock your CPU it will drain the battery life faster keep this in mind.....
The unofficial v1.5 rom came with an OC tool. If I downloaded another one, say SetCPU, will it just override the native tool?
Sent from my SAMSUNG-SGH-I717 using xda premium
tmb993 said:
The unofficial v1.5 rom came with an OC tool. If I downloaded another one, say SetCPU, will it just override the native tool?
Sent from my SAMSUNG-SGH-I717 using xda premium
Click to expand...
Click to collapse
I don't know is because i never rooted my device and i know im missing out a ton of features im going to keep stock for a while is because i like how my phone works at the moment.
Sent from my SAMSUNG-SGH-I717 using XDA
animeware said:
I don't know is because i never rooted my device and i know im missing out a ton of features im going to keep stock for a while is because i like how my phone works at the moment.
Sent from my SAMSUNG-SGH-I717 using XDA
Click to expand...
Click to collapse
If you have no idea and you don't root phones then why are you even here?! Talk about pointless...
Sent from my SAMSUNG-SGH-I717 using xda premium

Categories

Resources