Suggestion needed what to do after rooting.

Suggestion needed what to do after rooting. - Galaxy Ace S5830 General

Alright this is not the question you think it is! After rooting from THIS THREAD, I already googled and installed Link2SD, ROM Manager, Titanium Backup, Super Manager, BusyBox, Quick Boot and SetCPU. I have tested all of them except Titanium Backup and ROM Manager.
What I am confused is, CF-Root and ClockWorkMod Recovery. My plan is definitely to install Latest CWM v5 so that I can apply CM7 later (at least after more 5 months till I'm working on one development project related to Maps & GPS of Android platform). But as I heard, some themes & customizations needs CF-Root from THIS LINK. Which i find quite confusing how to apply. My questions are:
1) How to apply CF-Root? Please explain steps and Give me Attachments to download. Will my device work same as right now? Because I need my device to run fully so that I can test my written android applications directly via USB Debugging.
1-A) Do I need to unroot before applying CF-Root? If yes, what about the soft links of apps I have made into SD Card through Link2SD?
1-B) Will CF-Root include CWM?
2) Suppose I have CF-Root or CWM installed successfully and what happens to my stock recovery? Is there any way to keep it backed up so that When I need to send it to service station they wouldn't know about it? (By the way, what is the Stock Recovery image's location?)
3) Please also give some suggestions which you think I should keep in mind. I want to keep my ace as close to stock as possible. I also don't know about how to take snapshot of current ROM from Custom Recovery Mode and of Applications from Titanium Backup so that if anything could go wrong I could recover from CWM.
My Device info:
SGA (of course)
Android Version: 2.3.4
Baseband Version: S5830DDKQ5 (STOCK ROM)
Kernel Version: [email protected] #1
Build Number: GINGERBREAD.DDKQ5
Applied Root (for GingerBread) FROM THIS THREAD
XDA RULE!!

Thanks for your suggestion buddy. I know it bricks smartphones.. But also it doesn't work without CWM so I could not use it.
Thanks for quick suggestion.
EDIT:
I highly admire your suggestion and just removed it.

Rushyang said:
Thanks for your suggestion buddy. I know it bricks smartphones.. But also it doesn't work without CWM so I could not use it.
Thanks for quick suggestion.
EDIT:
I highly admire your suggestion and just removed it.
Click to expand...
Click to collapse
Your welcome bro , but be carefull ! Watch your steps

Rushyang said:
Alright this is not the question you think it is! After rooting from THIS THREAD, I already googled and installed Link2SD, ROM Manager, Titanium Backup, Super Manager, BusyBox, Quick Boot and SetCPU. I have tested all of them except Titanium Backup and ROM Manager.
What I am confused is, CF-Root and ClockWorkMod Recovery. My plan is definitely to install Latest CWM v5 so that I can apply CM7 later (at least after more 5 months till I'm working on one development project related to Maps & GPS of Android platform). But as I heard, some themes & customizations needs CF-Root from THIS LINK. Which i find quite confusing how to apply. My questions are:
1) How to apply CF-Root? Please explain steps and Give me Attachments to download. Will my device work same as right now? Because I need my device to run fully so that I can test my written android applications directly via USB Debugging.
1-A) Do I need to unroot before applying CF-Root? If yes, what about the soft links of apps I have made into SD Card through Link2SD?
1-B) Will CF-Root include CWM?
2) Suppose I have CF-Root or CWM installed successfully and what happens to my stock recovery? Is there any way to keep it backed up so that When I need to send it to service station they wouldn't know about it? (By the way, what is the Stock Recovery image's location?)
3) Please also give some suggestions which you think I should keep in mind. I want to keep my ace as close to stock as possible. I also don't know about how to take snapshot of current ROM from Custom Recovery Mode and of Applications from Titanium Backup so that if anything could go wrong I could recover from CWM.
My Device info:
SGA (of course)
Android Version: 2.3.4
Baseband Version: S5830DDKW5
Kernel Version: [email protected] #1
Build Number: GINGERBREAD.DDKQ5
Applied Root (for GingerBread) FROM THIS THREAD
XDA RULE!!
Click to expand...
Click to collapse
Please please please CMIIW.
Now to answer your questions, but firstly:
CF-Root is a kernel, adapted by the awesome ketut.kumajaya. CMW is a custom recovery. I'm saying this because I'm getting the impression that you think CF-Root and CMW are the same thing.
1. Most recent custom ROMs already provide CF-Root, so once you install the ROM, you'll have CF-Root.
1.a. No. At least, I don't think so, because flashing a kernel/ROM doesn't require root access as a dependancy
1.b. Not to my knowledge. I've been using CF-Root for so long, I forgot what the stock kernel feels like.
2. You know what? I actually have no idea. The only way I can think of to restore the stock recovery is by flashing a stock ROM via Odin. If you take it to a service counter, I doubt the counter will notice, but I would be pretty doubtful for the people who actually service your phone.
3. If you want it to be as close as stock ROM, use the stock ROM; it's that simple!
But if you want to use a custom ROM with the closest resemblance to stock ROMs, I would recommend the GingerReal ROM; it's essentially stock ROM, spiced up with performance tweaks.
3.a. You can do an entire system backup (Nandroid backup) with CWM. Just boot into CWM (hold Power+Home button when the phone is off), and choose "backup and restore" > "Backup" and wait. To restore, do the same things, except pick "Restore"
3.b. Doing a Titanium Backul is... complicatedly simple to answer. I'd recommend you to look up their FAQ or something.
Hope that helps!
Sent from my GT-S5830

adeklipse said:
CF-Root is a kernel, adapted by the awesome ketut.kumajaya. CMW is a custom recovery. I'm saying this because I'm getting the impression that you think CF-Root and CMW are the same thing.
Click to expand...
Click to collapse
Hello adeklipse,
First of all thanks for replying. And sorry I have messed up to explain my question more clearly... But, I do perfectly understand difference between two of those. CF-Root is custom kernel and CWM is custom recovery mode which provides a lot more facilities that stock recovery wouldn't.
First of all, I am on Stock ROM 2.3.4 DDKQ5 and I want to stay on it without flashing ROMs. Because I need my phone working super fine till I complete my project of android application development.
In what I am confused is, I want to apply some themes/bootanimations which according to what I read, requires CF-Root (which already covers root, Super User, CWM and BusyBox)... I have all of them except CWM in my phone.. What I think of a possibility that I could just apply CF-Root and use themes etc. which automatically will install CWM helpful for me taking snapshots of stock ROM as backup before I change even theme.
My question is: Chainfire's Post says different method to apply CF-Root and Ketut.Kumajaya says different method to apply CF-Root. However, I understand only the method which says go into recovery mode and apply update. But that post fails how CWM 4 automatically booted.
I want to be on safe side asking proper procedure before I proceed.
Also, ChainFire says his custom kernel is tested on "stock Gingerbread XXKPH, XWKPN, and DXKPB" which I assume are stock firmwares of different regions. So another question about compatibility in my region's (India's) stock firmware.
Thanks

U can theme your stock rom without root just copy th systemui apk and frameworkres apk to pc extract them change items and your done
Sent from my stock.unrooted.white painted 2nd GT-S5830 using xda premium

Rushyang said:
Hello adeklipse,
First of all thanks for replying. And sorry I have messed up to explain my question more clearly... But, I do perfectly understand difference between two of those. CF-Root is custom kernel and CWM is custom recovery mode which provides a lot more facilities that stock recovery wouldn't.
First of all, I am on Stock ROM 2.3.4 DDKQ5 and I want to stay on it without flashing ROMs. Because I need my phone working super fine till I complete my project of android application development.
In what I am confused is, I want to apply some themes/bootanimations which according to what I read, requires CF-Root (which already covers root, Super User, CWM and BusyBox)... I have all of them except CWM in my phone.. What I think of a possibility that I could just apply CF-Root and use themes etc. which automatically will install CWM helpful for me taking snapshots of stock ROM as backup before I change even theme.
My question is: Chainfire's Post says different method to apply CF-Root and Ketut.Kumajaya says different method to apply CF-Root. However, I understand only the method which says go into recovery mode and apply update. But that post fails how CWM 4 automatically booted.
I want to be on safe side asking proper procedure before I proceed.
Also, ChainFire says his custom kernel is tested on "stock Gingerbread XXKPH, XWKPN, and DXKPB" which I assume are stock firmwares of different regions. So another question about compatibility in my region's (India's) stock firmware.
Thanks
Click to expand...
Click to collapse
Chainfire's method invloves flashing via Odin if i saw it right.
Ketut's method is of flasihng CF-Root via recovery
I recommend flashing via recovery,its safer,easier and faster.
Don't worry,theres nothing such as Firmware compatibilty,its all about stability and perfomance.I am from India too and is using KPH firmware which is European firmware.I syggest you flash the KPH firmware,its the most widely used firmware.You would not face any problem if you flash another region's firmware.Flashing a different firmware is not easy atleast in my opinion.You just need Odin to do that.I suggest you read hubix's step by step detailed tutorial on that.

Prawesome said:
Chainfire's method invloves flashing via Odin if i saw it right.
Ketut's method is of flasihng CF-Root via recovery
I recommend flashing via recovery,its safer,easier and faster.
Click to expand...
Click to collapse
Thanks.. what I don't understand is there are bunch of files under Ketut's attachment. Which ones to apply in recovery mode and in which order??
Please help me out with that.
Also, if there's any bug like Wi-Fi or anything else pesters me, how would I revert it back to original custom ROM?
PS: I have just rooted my phone. CWM is not installed yet. Hope it will be installed by CF-Root directly.

If you have a bug,you could always restore a backup by using CWM.
I suggest you flash CWM before you flash cf-root.
About the files,ask in ketut's thread

Seriously I never tried cf-root. huh prawsome should i try it oR should I stick to oc kernel of ketut?
sent from my phone
plzzzz hit thanks if I helped you in any means .......

xdaboy122 said:
Seriously I never tried cf-root. huh prawsome should i try it oR should I stick to kernel of ketut?
sent from my phone
plzzzz hit thanks if I helped you in any means .......
Click to expand...
Click to collapse
lol...ketut cf-root kernel is the only kernel for stock(samsung) ROMs present here.Of course it is made by ketut . All other kernels are for cm7.

I mean oc kernel bro
sent from my phone
plzzzz hit thanks if I helped you in any means .......

I never used oc
I say you stick with oc bro

Related

[Q] Need advice on rooting + installing ROM

Ok, i have now bought a SGS2 coming from the Desire community. My phone is due later today and it will be rooted + custom ROM installed straight away.
I have been installing ROM's etc on my desire for ages and the whole principal is not new to me, however i just wanted to get my facts straight here before i jump right in as it does seem quite a bit different here!
Ok, i have this guide here to root:
[19.10.2011][CF-Root 4.4] KE*, KF*, KG1/2/3/5/6/7, KH1/3/4, KI2/3/4/8 - su+bb+CWM4
It all seems very straight forward and it installs CWM4 so all good. Where i am a little confused though, is that it says unless you flash another kernel which has CWM then you will lose it? This is new to me as on the Desire you could flash different kernels all day but it would never lose my CWM?
So if i then flash a custom ROM say this one for example:
Sensation ROM
..its implies that it doesnt touch the kernel?? - Is that correct? Does the ROM's for SGS2 not have a particular kernel included? - If so thats something for me to remember from here on!
All i want to do is root, install different ROM's and see what one i like best but keep CWM all the time as i am very used to it!..
Now i did see this thread:
SGS2 Easy Rooting Toolkit(zergRush Exploit)
Now it seems very easy to root on this method but no mention at all of CWM - so can i use this method and then install CWM? - I couldnt find how to do that though
As you can see i have done some research and i hate asking silly questions, but i just want to make sure i understand before i start!
Thanks in advance all!

I'm curious about this too. I just rooted with the zergbrush method that you mention on my Galaxy S2, but I can't get ROM manager to work. Do we need cf-root for the CWM to be installed? I'd probably try the cf-root method if that's the case, since I want to backup current ROM before flashing with anything else.

Well i think by the lack of replies that it may have been a dumb question , so i will use the cf method and just carry on reading the various threads..

I haven't heard ofa custom ROM that ships with a kernel withouth CWM installed, just because it would be really stupid.
The only thing you should be warned of is the difference between custom ROMs that are based on samsung firmware (touchwiz interface) and AOSP ROMS (like CM7 and MIUI). I tell you this becasue most Samsung based ROMS come with a CWM version that is not compatible with AOSP ROMs so in order to flash an AOSP ROM you'll have to flash a kernel via ODIN that comes with a non modified version of CWM. That said, you won't be having any problems.
---------- Post added at 02:58 PM ---------- Previous post was at 02:56 PM ----------
lars667 said:
I'm curious about this too. I just rooted with the zergbrush method that you mention on my Galaxy S2, but I can't get ROM manager to work. Do we need cf-root for the CWM to be installed? I'd probably try the cf-root method if that's the case, since I want to backup current ROM before flashing with anything else.
Click to expand...
Click to collapse
THis is exsctly was I was refering to earlier. ROM manager DOESN'T work with CWM version installed with cf root kernel, since cf root kernel comes with a version CWM modified specifically for SGS2 devices. If you want to use ROM manager you'll have to flash this kernel http://forum.xda-developers.com/showthread.php?t=1118693
Anyway there is an app called CWM manager that was developped for using with the modified CWM (cf root). You can find it in the market, it may be your replacement for ROM manager.
EDIT: CWM manager app isn't in the market but is included with the cf root kernel. So if you flash the cf root kernel you'll find the CWM manager app in your app drawer.

Grab odin,
Put phone into download mode,
Put a kernel that has cwm into PDA section of odin. (should be a .tar file)
Plug in phone, flash.
Plug phone into computer, move VillainRom 3.0.zip onto root of phone.
Unplug phone.
Reboot phone into CWM recovery.
Install villainrom.zip from CWM menu (install zip file from sd etc)
All done.
Custom rom, rooted and running latest 2.3.5 android.
Sent from my GT-I9100 using Tapatalk

This might sound stupid but rather that than knacker my phone completely.
I have successfully rooted and flashed a custom rom, and I'm happy with it but for future reference and to double check before messing up my phone, can I flash any rom?

[Q]2 NEW Question and Procedural help. Flashing new kernel (first time)

Hello,
After reading a lot and asking for advice/thoughts/suggestions, I have decided to root my phone to install a new kernel on stock firmware to attain better battery life and performance. I like the stability of stock roms, and it was pointed out to me that any other rom will be unstable to some extent (here: http://forum.xda-developers.com/showthread.php?p=21354863#post21354863)
First, my phone info:
Model: GT-I9100
Android Version: 2.3.4
Baseband Version: I9100XXKI1
Kernel Version: 2.6.35.7-I9100XWKI4-CL575468
[email protected] #2
Build number: GINGERBREAD.XWKI4
At this point I think I will flash this firmware:
Code:
XILA2
Firmware info
PDA:XILA2
PHONE: XWKI1
Date: 12/01/2012
Android 2.3.6
ITV (Italy):http://www.multiupload.com/DCYIJJ47I5
XILA2 Stock Kernel: http://www.multiupload.com/U7GK3FPHXF
Password: i[email protected]
Source: http://forum.xda-developers.com/showthread.php?t=1075278
And I will also flash whichever is the most updated version of SpeedMod
Question 1) Is this possible?
Yes. ~MistahBungle
Question 2) Would this be stable, as claimed by http://forum.xda-developers.com/showpost.php?p=21493150&postcount=14
yes ~MistahBungle
Question 3) Is there anything special about the country specific versions of the firmware on http://forum.xda-developers.com/showthread.php?t=1075278 ?
I.E. I am in Russia, so do I have to install the Russian one? Or can I install XX, etc.
(question was also asked here: http://forum.xda-developers.com/showpost.php?p=21564834&postcount=1)
no~MistahBungle
4) Is there any way to save the apps I have now before rooting?
Not really before rooting, use speedmod to root your current rom then use titanium backup to backup *USER* apps ~veyka
5) Speedmod says that it includes root. Does that mean that I can just, using odin, skip the step for CF root, and install speedmod?
Yes ~http://touristinparadise.blogspot.com/2010/11/samsung-galaxy-s-how-to-install.html
6) Should I flash XILA2 first or Speedmod first?
Speedmod
6b) If I flash speedmod first to get root, then XILA2, do I loose SM?
when you flash the rom it will come with its own kernel, that will replace speedmod, just flash speedmod again over the top, you wont lose the rom ~veyka
7) At the end of the process below, will I still have the yellow triangle (theoretically?)
Yes, easiest way to get rid of it and keep speedmod/CWM is to buy a USB jig. ~veyka
8) On the Intratech thread, as quoted in the code box above, there are 2 links for the firmware. What is the difference? I asked the question on that thread, but have not gotten a response yet. Search is down.
2nd is full firmware
9) Where can I get ADB codes to use for zergRush?
Kies ~It_ler
10) At what points along this crazy process should I be wiping what?
If I am going to flash the kernel and/or firmware, I understand that there are many steps to take which have been outlined 100 times. I would like to list them below to make sure I have them right. If I make a mistake, can someone please comment to let me know?
1) Root phone using ZergRush
2) Nandroid Backup
3) I understand that I need to backup my EFS folder, which I plan on doing using ktool
http://forum.xda-developers.com/showthread.php?t=1314719
4) Download Mobile Odin
5) Backup userapps using Ti
6) Use smsbackup+ to backup sms to gmail (doesnt need root but useful app anyway)
7) Flash XILA2 using EverRoot on Mobile Odin
8) Flash SpeedMod on MO
9) nandroid backup again
I appreciate your help and time. Any helpful answer gets “thanks”!

1) Yes.
2) Yes. Absolutely. No reason why it wouldn't be "stable", tho obviously your experience with any given rom/kernel may vary/differ from my experience of same.
3) No
4) The best backup solution for non-rooted phones I could find was MyBackup Pro, but in all honesty you're unlikely to have anything go wrong rooting your phone with CF Root. Best way to go would be to root your phone, then backup using Ti/do a Nandroid backup in CW Recovery before you do anything else, then flash any rom/kernel you want after that. This will give you a backup of your phone pretty much in its "original state" (minus your original kernel tho, obviously) you can go back to if you do find you have problems installing a new rom/if the rom doesn't work as well as you want it to.
You've done well with the steps you've outlined to get to where you want to go, they're very well planned/thought out If you follow those, I'd be surprised if you have any problems.
Edit - bit more detail

Thank you very much!
I just read that speedmod automatically installs root. I assume this means that I can use odin install speedmod on an unrooted phone?
If so, where does that leave my EFS folder?
Edit: Yes I can.

Might want to ask that one on the Speedmod thread. I used Speedmod briefly a while back but my phone was already rooted so I have no idea. I would have thought the first page of the thread would be pretty clear about any instructions.
The EFS thing is pretty simple, root your phone & use Hellcat's kTool to make a backup, store a copy of the backup on your external SD card & a copy on your PC/elsewhere.
jbarol said:
Thank you very much!
I just read that speedmod automatically installs root. I assume this means that I can use odin install speedmod on an unrooted phone?
If so, where does that leave my EFS folder?
Click to expand...
Click to collapse

MistahBungle said:
Might want to ask that one on the Speedmod thread. I used Speedmod briefly a while back but my phone was already rooted so I have no idea. I would have thought the first page of the thread would be pretty clear about any instructions.
The EFS thing is pretty simple, root your phone & use Hellcat's kTool to make a backup, store a copy of the backup on your external SD card & a copy on your PC/elsewhere.
Click to expand...
Click to collapse
Why did you switch from speedmod?

Doesn't work with CM/Miui There weren't enough pluses with the other roms I'd tried w/Speedmod to warrant sticking with the kernel. So I went back to Miui w/Siyah.
jbarol said:
Why did you switch from speedmod?
Click to expand...
Click to collapse

BUMP to reflect updated OP

jbarol said:
<snipped>
4) Is there any way to save the apps I have now before rooting?
5) Speedmod says that it includes root. Does that mean that I can just, using odin, skip the step for CF root, and install speedmod?
Yes ~http://touristinparadise.blogspot.com/2010/11/samsung-galaxy-s-how-to-install.html
6) Should I flash XILA2 first or Speedmod first?
6b) If I flash speedmod first to get root, then XILA2, do I loose SM?
7) At the end of the process below, will I still have the yellow triangle (theoretically?)
If I am going to flash the kernel and/or firmware, I understand that there are many steps to take which have been outlined 100 times. I would like to list them below to make sure I have them right. If I make a mistake, can someone please comment to let me know?
1) Root phone using CF Root
2) I understand that I need to backup my EFS folder, which I plan on doing using either:http://forum.xda-developers.com/showthread.php?t=1308546
OR
http://forum.xda-developers.com/showthread.php?t=1314719
3) Nandroid Backup
4) Flash XILA2 to get rid of yellow triangle
5) Flash SpeedMod
6) Now I would backup again
I appreciate your help and time. Any helpful answer gets “thanks”!
Click to expand...
Click to collapse
4) Not really before rooting, use speedmod to root your current rom then use titanium backup to backup *USER* apps
6a) Flash speedmod first to get root todo the following
1) use ktool to backup your EFS
2) backup user apps with titanium backup
3) make a nandroid from CWM recovery
4) Use smsbackup+ to backup sms to gmail (doesnt need root but useful app anyway)
6b) when you flash the rom it will come with its own kernel, that will replace speedmod, just flash speedmod again over the top, you wont lose the rom.
7) Yes, easiest way to get rid of it and keep speedmod/CWM is to buy a USB jig.

veyka said:
4) Not really before rooting, use speedmod to root your current rom then use titanium backup to backup *USER* apps
6a) Flash speedmod first to get root todo the following
1) use ktool to backup your EFS
2) backup user apps with titanium backup
3) make a nandroid from CWM recovery
4) Use smsbackup+ to backup sms to gmail (doesnt need root but useful app anyway)
6b) when you flash the rom it will come with its own kernel, that will replace speedmod, just flash speedmod again over the top, you wont lose the rom.
7) Yes, easiest way to get rid of it and keep speedmod/CWM is to buy a USB jig.
Click to expand...
Click to collapse
Ok, nearly everything is said.
Just a "small" additional suggestion:
There is a description of how to get rid of yellow triangle after flashing an insecure kernel in Intratech's first post of his Official Firmware thread, in Chainfire's second post of his CF-Root thread, and there is another way of preventing the yellow triangle and the incrementation of the binary counter (other than using a USB Jig):
As you still have XWKI4 stock ROM, you are able to root your phone using the zergRush exploit. (You can find a short description in Intratech's first post of his Official Firmware thread and a link to the corresponding zergRush thread.)
Then you can buy (Chainfire's) Mobile Odin from the Market.
Using the paid version of Mobile Odin and having a rooted phone, you are able to flash stock ROMs (such as XILA2) with the EverRoot option, which allows you to remain root - without the yellow triangle and without an incremented binary counter.
With Mobile Odin you can easily flash custom kernels (such as SpeedMod) as well, after flashing the stock ROM you want to have (XILA2).
Good luck and don't forget to make a backup (as soon as you have rooted your phone) !

That will cost about the same as me getting a jig, and i dont have to worry about it getting lost in the mail
On the intratech thread there are 2 links for la2, which one should I be flashing?

It_ler said:
Ok, nearly everything is said.
Just a "small" additional suggestion:
There is a description of how to get rid of yellow triangle after flashing an insecure kernel in Intratech's first post of his Official Firmware thread, in Chainfire's second post of his CF-Root thread, and there is another way of preventing the yellow triangle and the incrementation of the binary counter (other than using a USB Jig):
As you still have XWKI4 stock ROM, you are able to root your phone using the zergRush exploit. (You can find a short description in Intratech's first post of his Official Firmware thread and a link to the corresponding zergRush thread.)
Then you can buy (Chainfire's) Mobile Odin from the Market.
Using the paid version of Mobile Odin and having a rooted phone, you are able to flash stock ROMs (such as XILA2) with the EverRoot option, which allows you to remain root - without the yellow triangle and without an incremented binary counter.
With Mobile Odin you can easily flash custom kernels (such as SpeedMod) as well, after flashing the stock ROM you want to have (XILA2).
Good luck and don't forget to make a backup (as soon as you have rooted your phone) !
Click to expand...
Click to collapse
So I looked at the zergRush thread, and found that I need to have the ADB drivers. Using google search I found a way to get them through Super1click. Is that the way that you would reccomend?

jbarol said:
That will cost about the same as me getting a jig, and i dont have to worry about it getting lost in the mail
On the intratech thread there are 2 links for la2, which one should I be flashing?
Click to expand...
Click to collapse
jbarol said:
So I looked at the zergRush thread, and found that I need to have the ADB drivers. Using google search I found a way to get them through Super1click. Is that the way that you would reccomend?
Click to expand...
Click to collapse
Feel free to use a USB Jig - as long as you have the old bootloader.
I recommend to flash Frankenstein ROMs, as they are same as stock ROMs (with old bootloader) and build to be combined with any Modem and/or CSC file.

jbarol said:
So I looked at the zergRush thread, and found that I need to have the ADB drivers. Using google search I found a way to get them through Super1click. Is that the way that you would reccomend?
Click to expand...
Click to collapse
If you have the samsung phone drivers installed, you have the adb drivers, if not there is a copy in my 4shared (link in my sig, 4icon)

So I successfully rooted with zerg rush.
I backed up my EFS
I used Ti to back up my user apps
I am backing up my sms stuff now
How do I do a nandroid backup without having cw?

so i did something stupid, i think. so far i dont see any lasting damage, i dont think.
i went into the market and installed rom manager, then flashed clockwork mod, then went to do a backup but it failed because it couldnt find an update or something. i just rebooted, and my phone turned on, looks fine. how can i a) get rid of that, and b) backup my phone?

jbarol said:
so i did something stupid, i think. so far i dont see any lasting damage, i dont think.
i went into the market and installed rom manager, then flashed clockwork mod, then went to do a backup but it failed because it couldnt find an update or something. i just rebooted, and my phone turned on, looks fine. how can i a) get rid of that, and b) backup my phone?
Click to expand...
Click to collapse
Uninstall rom manager first, it was what caused the problem,
sgs2 does not like or is incompatible with certain functions of rom manager.
download and flash this file using odin for cwm standalone.
Old - 4.0.1.5: http://www.multiupload.com/GEXTWB05E0 (md5: aa3929770791364ddfdc8ca23db2203f)
then go into cwm and make a back up.

Thank you all for your help!

[Q] Doubt about nandroid backup

Hi out there! First should say im new on Android, and want to learn at least to a medium level user (flashing diferents ROMS, testing them, setting my phone how i like to, etc). Im now learning the basic vocabulary, looking and reserching about my android model and software. And the question is the next one:
I want to root my phone(SGS2/GT-I9100) by this method because i read the whole 44 pages of the thread and sounds safe, easy and all the people talks great about it (except one user that brick his phone ).
http://forum.xda-developers.com/showthread.php?t=1501719
And i have read too that the first thing you should do after rooting is an nandroid backup, so you can get to this point in a future if something doesn´t work rigth.
Usually the nandroid backups are made with CWM or Titanium backup. I would like to use CWM, and my question is:
When I follow below rooting guide, the CWM isn´t permanent no? it just used to flash de SU-Busybox. So should i download and install it to make the "holy" nandroid backup?? I found this other thread where is explained how to make this nandroid backup, with RM and then using CWM.
http://forum.xda-developers.com/showthread.php?t=1592104
So after rooting, i should follow those steps no?( i mean, getting RM) Because my doubt is that the first CWM (the one i use for rooting) is the same i can use for de nandroid backup?? or this one its just to flash the SU intaller and i need to download and install it (CWM)? So i can follow both guides without any problem? im not doing the same thing 2 times no?
Thanks, and sorry for my english, it´s a little rusty... Im a noob and hate my self (xD), but want to learn.

CF Root
I'd recommend rooting with the cf root method. It installs SU, Busybox and CWM recovery. In recovery you can make a nandroid back up. It's quick and easy.
The links you posted came up with a 404 error.

Cf root is always the best way to root ur phone, since it also installs the CWM recovery for u, so that u can do the nandroid bkp for future use if any issue peeps while flashing any roms r mods
ps- please ensure u choose the right cf-root kernel to root ur phone

So i should follow this guide (i assumpt):
http://forum.xda-developers.com/showthread.php?t=1103399
But i have looked to my kernel version (wich is LPB) and boths files give an error when mounting secure storage (said by CF)...

rolfer said:
So i should follow this guide (i assumpt):
http://forum.xda-developers.com/showthread.php?t=1103399
But i have looked to my kernel version (wich is LPB) and boths files give an error when mounting secure storage (said by CF)...
Click to expand...
Click to collapse
If that is what you fear I suggest installing a different official ROM which doesn't have the same problems with CF Root. Here is a thread where you can find many of them...
http://forum.xda-developers.com/showthread.php?t=1075278
After flashing official firmware, THEN you can flash the appropriate CF Root
Sent from my GT-I9100 using Tapatalk

rolfer said:
So i should follow this guide (i assumpt):
http://forum.xda-developers.com/showthread.php?t=1103399
But i have looked to my kernel version (wich is LPB) and boths files give an error when mounting secure storage (said by CF)...
Click to expand...
Click to collapse
To make a nandroid backup, just use the same steps to launch CWM from stock recovery. You will be able to make a nandroid backup. To restore, it is same thing, you have to launch the CWM from stock recovery each time. That is the only difference with CF_Root, you have to launch CWM with an extra step as you keep your original stock CWM
As if you should use my superSU zip or original superuser one, I advise my zip for 2 reasons:
- SuperSU offers the possibility to easily unroot or migrate to superuser if you like (superuser does not natively offers this)
- it is the last version of busybox and fixes issues with some applications like adaway

Great! So i don´t need to install CWM then? I can do everything i need through it by this way? like nandroid backups, flashing ROMS, etc...? I want to make a nandroid backup just after rooting, to have a secure save if i need it in the future (I hope I don´t xD)
And then ill take your files cause are latest Today i don´t have enough battery to root the device securly, so i´ll do it tomorrow. I´ll tell here if it was succesfull for future readers with same doubt like me.
Thanks again!

Yes, you can do all that you like from the included cwm custom recovery. After reboot, you are still on your original stock CWM as it vanishes. That is really the only difference with a permanent cwm recovery (except maybe some custom mods/tweaks by kernel developers)
That way, no yellow triangle or custom flash counter increase

[Q] Ripping out my hair over rooted S3!

Ok, this is my very first post!
After 2 days of research (and maybe wrong word usage), and reading through the FAQ's in the GS3 Section, and carefull consideration and preperations for possible n00b harshness, *sigh* I decided to post. I just bought a device from someone and it is rooted. YAY customization, boo because I have no idea the language used around rooting. I've read a guide found on google about rooting language for beginners and the helped, informing me of the basics but I'd reaaaaaaly like to explore all of the benefits of rooting, however I can't even figure out what ROM im running! I don't want to 'delete' the super user (software?) and have to root all over again but it's like someone left a baby on my doorstep! I'm utterly clueless as to how I can use root to my advantage and it's very frustrating! The following issues are present at the moment:
How to figure out what ROM running?
How can I maximize the benefits of being rooted?
If it helps, I do have Root Manager installed, my kernel version is:
3.0.31-329968
[email protected] #1
SMP PREEMPT Tue Oct 16 22:37:51 KST 2012
Let me know if any other info is needed. I've prepared myself for any feathers I may have ruffled in posting this. If these are questions answered please guide me to the answers. You guys are amazing and I appreciate ANY feedback!

1. settings - about device
2. use root apps

Root is pretty much granting Admin rights to the program requesting it. Be very careful once root rights are given the app can do just about anything it wants.

If I were you I would install Clockworkmod Recovery (if it`s not installed already) and then wipe data/cache and then flash a new ROM and doing everything from the start. I would have my trust issues when buying a rooted phone from someone. At least when you do everything yourself then you know exactly what you are dealing with.

Scarface1991 said:
If I were you I would install Clockworkmod Recovery (if it`s not installed already) and then wipe data/cache and then flash a new ROM and doing everything from the start. I would have my trust issues when buying a rooted phone from someone. At least when you do everything yourself then you know exactly what you are dealing with.
Click to expand...
Click to collapse
Now when I'm wiping data cache I know:
Hold the power
Volume up
And home button
To get into recovery mode, after that I'm a little hesitant to explore. Could you expand please and thank you.

rmoore1027 said:
Now when I'm wiping data cache I know:
Hold the power
Volume up
And home button
To get into recovery mode, after that I'm a little hesitant to explore. Could you expand please and thank you.
Click to expand...
Click to collapse
The problem is that I don`t know what recovery do you have. If it`s the stock one or if it`s the ClockworkMod Recovery. You can not flash ROMs or other stuff like custom Kernels with the Stock Recovery. You need ClockworkMod for that.
I would download the Siyah Kernel, flash it through Odin and afterwards through the Stweaks app (you can get it from the playstore) I would install the Siyah Custom Recovery which is based on ClockworkMod recovery. That`s how I did it when I got my S3
You can get the Siyah kernel here: http://www.gokhanmoral.com/
You could also just flash the ClockworkMod recovery with Odin from here and then just flash a custom ROM:
http://forum.xda-developers.com/showthread.php?t=1719744
There are multiple ways
Also what Android Version are you running right now?

Scarface1991 said:
The problem is that I don`t know what recovery do you have. If it`s the stock one or if it`s the ClockworkMod Recovery. You can not flash ROMs or other stuff like custom Kernels with the Stock Recovery. You need ClockworkMod for that.
I would download the Siyah Kernel, flash it through Odin and afterwards through the Stweaks app (you can get it from the playstore) I would install the Siyah Custom Recovery which is based on ClockworkMod recovery. That`s how I did it when I got my S3
You can get the Siyah kernel here: http://www.gokhanmoral.com/
You could also just flash the ClockworkMod recovery with Odin from here and then just flash a custom ROM:
http://forum.xda-developers.com/showthread.php?t=1719744
There are multiple ways
Also what Android Version are you running right now?
Click to expand...
Click to collapse
I'm running 4.1.1 at the moment.

[Q] Help me with Basic Android development tools

Ok, at the outset I would like to make it clear I am the beginner of all beginners when it comes Android tweaking and the doubts are related to it.
I have Samsung Ace GT S5830i phone. Its rooted and CWM installed. Kindly help me clear the following doubts regarding custom roms, kernel and firmware.
1. What is a kernel and What is a stock firmware. Are there any differences between it.
2. If I am installing a custom ROM, which has a custom kernel. Which do I install first? ROM or KERnel? Or whether both are bundled together as a single installation.
3. What is Odin and for what is it used for
4. If I have a CWM backup of my phone, and while installing a custom rom with custom kernel, If my phone gets bricked. Can I unbrick it by restoring cwm backup I have taken, or should I have to go via Odin (also how do i do it via Odin)
5. Can I install a different kernel on the existing rom, will it wipe of all my applications and settings?

kungfuEngineer said:
Ok, at the outset I would like to make it clear I am the beginner of all beginners when it comes Android tweaking and the doubts are related to it.
I have Samsung Ace GT S5830i phone. Its rooted and CWM installed. Kindly help me clear the following doubts regarding custom roms, kernel and firmware.
1. What is a kernel and What is a stock firmware. Are there any differences between it.
2. If I am installing a custom ROM, which has a custom kernel. Which do I install first? ROM or KERnel? Or whether both are bundled together as a single installation.
3. What is Odin and for what is it used for
4. If I have a CWM backup of my phone, and while installing a custom rom with custom kernel, If my phone gets bricked. Can I unbrick it by restoring cwm backup I have taken, or should I have to go via Odin (also how do i do it via Odin)
5. Can I install a different kernel on the existing rom, will it wipe of all my applications and settings?
Click to expand...
Click to collapse
Even though you posted in incorrect section I will help you with some answers.
1. a) What is a kernel?
b) Stock firmware is like the root of your machine. I would take windows for simple example as i think you are not aware of that.
-Your computer was firstly installed with Windows Vista and you later upgrade to a higher version of windows. Stock ROM in this case is Windows Vista.
- What is "firmware"?
Firmware refers to the applications and operating system that control how a cellphone or smartphone operates. It is called firmware rather than software to highlight that it is very closely tied to the particular hardware components of a device. Firmware is generally flashed into a phone's ROM rather than simply being loaded into normal phone storage, where it could more easily be erased and lost in the event of a crash. Firmware updates are sometimes provided by a company as a way to fix bugs or introduce new functionality. Unfortunately Samsung has abandoned firmware updates on low-end devices such as our Galaxy Ace.
Click to expand...
Click to collapse
2. If the ROM zip contains the kernel there is no need of installing a custom kernel afterwards. Always when you flash something don't forget to mount /system, /data, /cache and /sdcard. It seems you have installed CWM Recovery so you should know about mounting.
Click to expand...
Click to collapse
3. Odin was software that was first leaked back a couple years ago from Samsung. Samsung uses or used it to "flash" or "install" firmware/os/kernels/radio's onto the devices. Samsung still uses it or a form of it in certain releases as a Window's Upgrade Tool as its been known. Its still basically old Odin underneath a custom Window's UI skin.
Odin is your friend, respect it. If used improperly it can brick a device since it has the ability to flash very vulnerable sections of your device.
Click to expand...
Click to collapse
4. a) If your phone can access through CWM then you can probably unbrick your device restoring your nandroid backup. In such case, the brick is called a soft-brick.
b) If your phone stucks on boot logo and has no access on CWM then, you should use ODIN to unbrick it.
Click to expand...
Click to collapse
5. You can. I don't know if you loose some of your settings but what is certainly you won't loose is data (Unless you wipe it)
Click to expand...
Click to collapse
You can use Google too for such questions. Also, you seem to be new here so please keep in mind these things :
- Never ask for ETAs (Expected Time of Arrival)
- For reporting bugs or asking questions about a ROM use its Discussion thread. If it has no discussion thread you are free to post in development thread.
- Do not post OFF-Topic replies on such threads. You are free to do such thing on the OFF-TOPIC thread on general section of this device.
- Follow XDA rules even if you feel embarrassed or offended. Report the user which does this to you instead.
- Instead of Replying "Thank you. It worked!" Just click Thanks button instead.
Good luck!
Regards,
Teddy

Search on google for all this questions..u definately find all solutions..
Sent from my GT-S5830i using Tapatalk 2

Better Mobile App

welcome