Related
Hello i am new to the X10 forum, just got the handset second hand, but in super condition, the other day and i must say i is really growing on me!
Being a former, Htc hd2, galaxy tab, htc magic owner i have done allot of tweaking to my devices, so i started of with rooting my x10, putting on jit, deleting a ton of apps and so on, and i must say it is running great now with dual touch and all.
But i see there is a newer firmware out there and also a froyo rom (which i might wait on getting til everything works).
when i check about phone, i currently get this information:
Firmware version: 2.1 update 1
Baseband version: 2.0.46
Kernel version: 2.6.29 [email protected] #1
Build number: 2.0.A.0.504
so here comes the questions:
1) What is the newest version of 2.1 i should look for? ( a link would be great )
2) Will there be any major changes?, i looked abit around and it seemed that its mostly about battery life and so? i got about 32 hours last full circle with 17 procent left when i recharged it.
3) I am trying to use "setcpu" but i am not sure it is allways running since it dosent always show up in my app killer program, is there a way to make it run allways?
4) Another program i am using for the first time is APNdroid, i am not really sure about, and the question goes, does it do anything automaticly? or is it only a switch (the widget) for turning on or off all wireless radios? same thing with this as with "setcpu" i dont feel sure that it is running?
5) Is there a work around to get the camera working in froyo? using a third party app maybe? is there other disadvantages and is there a way to get the Sony E wallpapers loaded to the rom ? ( i actually really like the cosmetic chances of the X10s android)
I thank you for taking a bit of your time, i am glad to be back at xda with my phone, just had to sell my Nokia n8 since i just missed xda and all the fun too much
1) What is the newest version of 2.1 i should look for? ( a link would be great )
Click to expand...
Click to collapse
If you're referring to firmware, Then 2.1 Generic Firmware (2.1.A.0.435) is the latest as of now. You can update using the flashtool. (Try searching the forum for tutorial)
2) Will there be any major changes?, i looked abit around and it seemed that its mostly about battery life and so? i got about 32 hours last full circle with 17 procent left when i recharged it.
Click to expand...
Click to collapse
Well yeah Timescape has landscape mode, Smoother unlock, HTC keyboard.
PS: I tried to do my part of help I can, I am really unsure of other questions. You can wait for others to help you out buddy!
it's portrait and landscape mode*
3) I am trying to use "setcpu" but i am not sure it is allways running since it dosent always show up in my app killer program, is there a way to make it run allways?
Click to expand...
Click to collapse
use it as a widget,you will see it always then
4) Another program i am using for the first time is APNdroid, i am not really sure about, and the question goes, does it do anything automaticly? or is it only a switch (the widget) for turning on or off all wireless radios? same thing with this as with "setcpu" i dont feel sure that it is running?
5) Is there a work around to get the camera working in froyo? using a third party app maybe? is there other disadvantages and is there a way to get the Sony E wallpapers loaded to the rom ? ( i actually really like the cosmetic chances of the X10s android)
Click to expand...
Click to collapse
camera works great,video cam is not working ,we use cam illusion as a alternate
Thanks guys
I might go for froyo, just dosent look as good as SE custom blueish skin, but i guess the speed is worth it. would love those wallpapers though.
Is the froyo batterilife worse? ( i am thinking the SE rom is optimized for the device while froyo is not?)
Okaj now i really need some help did a really unwise thing, was not intentionaly just forgot to flash newest baseband radios
well i flashed froyo without the newest baseband and now it just keeps restarting and restarting with the freex10 logo, is there any way i can get the phone to talk with the computer so i can flash the newest baseband?
i allready tryed the factory restore, don tknow why i didnt think of backing up or something so foolished mistake.
if anyone can point me to some help i would be glad.
Download newest flashing software for x10
>>>HERE<<<
Also get yourself a copy of the newest FW with new baseband >>>HERE<<<
The second link should give you the required file to use with the new flash software.
Just put the files in Firmware folder of your Flash software install location and hunt out the simple instructions.
When you have done press the Root option on your flash software and install xrecovery and titanium backup.
Instructions for flashing to the 2.2 froyo beta 4 are in the development section but make sure you use xrecovery to wipe user data before you flash it.
I'm guessing thats why you semi-bricked your X10 last time.
Hey i got it up running by loading v3 of froyo, so now i can just flash the newest, and then v4 i hope so at least but thanks
oh i see so the flashing it will give me newest baseband super thanks
simon2901 said:
oh i see so the flashing it will give me newest baseband super thanks
Click to expand...
Click to collapse
If you can't make it, check howto thread
I did manage to get a hold on it, feel in control now thank you by the way does anyone any good "skins" /"Themes" ( not sure what its called) for froyo on it?
Before I start 1) I understand the is a patch for gsm with no data. 2) I also know that I can flash the old baseband. But I wanted to know if the is a way (either being developed or could be) to get it working. I would give it a go myself but I Haven't the slightest clue about what to do. So please no NOOB GO GET OLD BASEBAND INSTEAD OF NEW BASEBAND SH*T. Just a simple question/answer.
There is no way u could get gsm n data working on new baseband on mik's rom.And no one should ever waste his time in making this work,since the old baseband gives no problem atall.
Hey there.
Here is a link with the [HowTo] to downgrade to the old baseband:
http://forum.xda-developers.com/showthread.php?t=1217504
cant really help you with the new baseband. I had to downgrade to the old one to get the gsm working.
Just a little help.
I think that using the new baseband only because it's "new" is simply stupid. I bet that you don't even know what's new in it. The old one is good and stable. You'll make your life easier if you use the old one instead of asking how to use mobile data with the new one.
Alternatively, you can try to compile the new CyanogenMod Mik is working on. Maybe he already fixed this.
ashishv said:
There is no way u could get gsm n data working on new baseband on mik's rom.And no one should ever waste his time in making this work,since the old baseband gives no problem atall.
Click to expand...
Click to collapse
Well gsm works why not data? and its not wasted time. As everytime I want to test a new version of a rom or a new rom (Andy's rom) I have to downgrade baseband use it. Then prefare a different rom and have to upgrade baseband. Its a hasel so if one could make one universal baseband that would be ideal.
Palmaaa said:
Hey there.
Here is a link with the [HowTo] to downgrade to the old baseband:
http://forum.xda-developers.com/showthread.php?t=1217504
cant really help you with the new baseband. I had to downgrade to the old one to get the gsm working.
Just a little help.
Click to expand...
Click to collapse
Yea I know how to downgrade I do it to test different roms.
Ianis G. Vasilev said:
I think that using the new baseband only because it's "new" is simply stupid. I bet that you don't even know what's new in it. The old one is good and stable. You'll make your life easier if you use the old one instead of asking how to use mobile data with the new one.
Alternatively, you can try to compile the new CyanogenMod Mik is working on. Maybe he already fixed this.
Click to expand...
Click to collapse
New baseband is much better where I live. Never cuts out, hear people much more clearly and download speed is faster. (Remember I said where I live.)
First of all please forgive me that I had to create a new thread for things which are explained already plenty of times. the only thing happening is that all the things explained earlier, are not working in my case. Guys please help me. everything was running fine until I decided to switch to stock 2.3.3. I was unaware with this baseband thing. I switched to stock 2.3.3. I did not like it, so decided to roll back to cm7, I did, and here i am with no signal in my phone... I did flash the old baseband, but am still stuck with no signal... am in real trouble, and now if I again switch to stock 2.3.3, then also I dont get a network coverage at all. Please help me buddies
And yes one more thing, even if I flash back the old stock froyo, via kdz or lgmdp, I cant get the network coverage ... the guy at LG service center says there's some problem with the board ... but I dont think its the board problem, is there any way to diagnose this issue or am I *ucked?
No ,did I wipe Fatory reset in settings menus. If so you are.
Sent from my LG-VM670 using xda premium
ajones23 said:
No ,did I wipe Fatory reset in settings menus. If so you are.
Sent from my LG-VM670 using xda premium
Click to expand...
Click to collapse
well, yes factory settings r also wiped... no matter if I restore it, switch back to stock froyo, or upgrade to stock gingerbread, I dont see any network issue. Somebody please help me yar
Well you might have to go back to stk 2.2. Then call VM,they will help you reactivate ur phone. That happened to me once.
LG-VM670 ICS Backside Rom
---------- Post added at 10:07 AM ---------- Previous post was at 10:03 AM ----------
Dont tell them what you are doing. Tell them u accidently pushed the wrong setting.
shreyas.kukde said:
First of all please forgive me that I had to create a new thread for things which are explained already plenty of times. the only thing happening is that all the things explained earlier, are not working in my case. Guys please help me. everything was running fine until I decided to switch to stock 2.3.3. I was unaware with this baseband thing. I switched to stock 2.3.3. I did not like it, so decided to roll back to cm7, I did, and here i am with no signal in my phone... I did flash the old baseband, but am still stuck with no signal... am in real trouble, and now if I again switch to stock 2.3.3, then also I dont get a network coverage at all. Please help me buddies
And yes one more thing, even if I flash back the old stock froyo, via kdz or lgmdp, I cant get the network coverage ... the guy at LG service center says there's some problem with the board ... but I dont think its the board problem, is there any way to diagnose this issue or am I *ucked?
Click to expand...
Click to collapse
What ROM are you running on, Their are a few ROMs that haven't fixed network issues, If you are using a iHO ROM then have you tried the Airplane Mode Fix?
right now I have flashed stock gingerbread. that 'v20g' one. but if u say, i will switch to another rom whichever u say... I tried stock froyo, mik's cm7, and void.# forever's cm7. none of those fixes the signal, I even tried the new baseband patch provided by mik, not working :'(
What phone do you have. Do you have an optimus v,you have to use a ROM for it.
LG-VM670 ICS Backside Rom
shreyas.kukde said:
right now I have flashed stock gingerbread. that 'v20g' one. but if u say, i will switch to another rom whichever u say... I tried stock froyo, mik's cm7, and void.# forever's cm7. none of those fixes the signal, I even tried the new baseband patch provided by mik, not working :'(
Click to expand...
Click to collapse
What Phone do you have so I can point you in the right direction, I develop for Optimus V,
I have optimus one
shreyas.kukde said:
I have optimus one
Click to expand...
Click to collapse
This is the most stable one,
Good luck and if you need help feel free to message the developer or me for some info, I don't know much when it comes to the Optimus One, but he will be able to help you as he is a part of the CM7 Team
thaunknownartist said:
This is the most stable one,
Good luck and if you need help feel free to message the developer or me for some info, I don't know much when it comes to the Optimus One, but he will be able to help you as he is a part of the CM7 Team
Click to expand...
Click to collapse
Brother thanks for the link but I am already done with this, this strangely does not work for me. I dont know how and why :'(
try flashing by following this thread http://forum.xda-developers.com/showthread.php?t=1324105
I flashed that way which u said , I flashed every other way... still nothing... :'(
is it a hardware problem now? but does the board thing gets defected this easily?
shreyas.kukde said:
I flashed that way which u said , I flashed every other way... still nothing... :'(
is it a hardware problem now? but does the board thing gets defected this easily?
Click to expand...
Click to collapse
While flashing was there any problem during nv backup or restore ?
is your imei visible in settings->about phone->imei ?
mak.3736 said:
While flashing was there any problem during nv backup or restore ?
is your imei visible in settings->about phone->imei ?
Click to expand...
Click to collapse
no there wasnt any problem, and yes I can see my imei in settings, which I found correct.
then i think there is problem in hardware.
Flash original rom and recovery and take phone to service center, if you have warranty phone will be repaired for free.
mak.3736 said:
then i think there is problem in hardware.
Flash original rom and recovery and take phone to service center, if you have warranty phone will be repaired for free.
Click to expand...
Click to collapse
yes it is in warranty period, but still, they will take so many days... thats what service center guys do...
Hi all,
So this is just to help noobs and similar with what I tried so that I got the CM9 port by lupohirp to work. As you know the CM9 thread is devs/geeks only and not quite intended for feedback and discussion. The same applies to the new KANG thread
P.S. Lupohirp, this is just to help you and not to take away any of your credit!!
A brief background so that those with similar situations can relate and not ask too many questions. I asked all that I needed so I don't think you should have more. And if you do, I am unable to answer most of those.
So here goes:
- I first had stock Froyo
- Then Rooted with z4root and got ClockworkMod and so on
- then put on CM7 by mik_os which works with old baseband only.
(baseband is the bit that allows your phone to talk to a cellular network)
So the baseband story once again after the hundreds of posts on it. Froyo (2.2.x) from LG has the old baseband. Those LG phones that got upgraded to factory gingerbread (2.3.x) were also upgraded to the new baseband. However coming to custom ROMs the story is different. Some work with the old e.g. mik_os CM7 and some work with new e.g. official CM7 by adfad666 and unofficial CM9 by lupohirp.
That means, since I had Froyo and then moved to mik_os CM7, I still have old baseband.
- moving to today, I wanted a new ROM and got excited by the CM7 and CM9 ports. Both said they want new baseband.
Two ways of going about this:
1. Upgrade to new baseband via the various ways (KDZ, etc) which seems to be a bit scary from the instructions though it might not be!
2. Get old baseband to work with the new ROMs. This is possible based on what I read here. The file is available here under the Old Baseband paragraph.
So I decided to go with Option 2 since, baseband can be upgraded/downgraded irrespective of the ROM. The difference will always be that only one will work by default and the other one is a patch away.
So now,
- I got the zip file for the cm9 beta from that thread
- I got appropriate gapps (ics version not gb) - http://goo-inside.me/gapps
- I got the old baseband fix from the baseband link in Option 2 above.
- I put the gapps and the cm9 zip in the root of the sdcard for ease of access
Now using ClockworkMod 5.0.2.0 (remember 5.0.2.0 is for old (and probably new) baseband and 5.0.2.7 is for new)
- wiped /cache, /data, /system, /sd-ext
- left /boot as is. This is of utmost importance. You wipe this, you're on your own (ok not so bad but if you do, do not RESET your phone, learn how to get it back and then fix it)
- and /sdcard contains the new files so do not wipe it
So then the usual route, flash the zip after selecting it. obviously CM9 first. Then the gapps file. You can do the gapps file after a restart as well.
Now everything should be ok except your cell signal. That should be dull/inactive, etc. If you go phone status it will also not have much there.
So now get the old baseband fix files. extract to a folder of choice. adb push these three files to /system/lib/ (I just learnt that you should have 2MB free in /system AFTER the copying)
P.S. adfad666 has advised against doing this because of a risk of corruption. I don't know why, I couldn't get them in any other way so I took the risk since the fix is just a recovery away, so if you do this its your own risk
I then rebooted the phone and all was well.
Tested 2G and 3G and data as well. I didn't see whether it did HSDPA or not. The SIM also had all the APNs etc ready. SMS is good too!
Thread Summary
So this here is a companion thread (hopefully) to the main dev thread. Its for people not reporting bugs but closer to how something is done. Those doing patches and stuff still go to the main thread.There is another companion thread here as well which I had not seen.
A brief summary of what has happened so far:
- lupohirp has compiled ICS for our beloved Optimus One P500s from CM9 source code. It comes with Apex Launcher as of the latest beta.
- there is active work going on and people complain about things here and there and provide great feedback.
- this thread was started for noobs trying to get old baseband to work (Many thanks to aspee's thread here for the baseband info!) with the CM9 port but I felt like helping out more so I am explaining what I know.
- some alternate kernels have been compiled whose links are further down this post.
- somewhere along the line CM team has decided that we can get official CM9 subject to some coding practices being fulfilled
Progress
2012-03-21 KANG BUILD 2 and new thread
2012-02-14 BETA 3 Released! Good fixes Users of beta 2 don't need to do a full wipe, just wipe /system and flash Beta 3
Kernels
2012-01-00 d3s3rt_eagle : This one people claim to be fairly stable.
2012-02-01 _Arjen_: Backup if you did not make one!
2012-02-03 lupohirp: Some kgsl stuff that lupohirp is testing. This one is the latest version on the thread. I have no idea what kgsl means.
2012-02-04 lupohirp: Franco.kernel with kgsl 3.0
2012-03-23 gontadu: has no idea what the latest kernel is
Ofcourse it is upon you to read the precautions and pitfalls with each of those kernels.
Patches
2012-02-11 Possible fix for mic by cyrix.vs: http://forum.xda-developers.com/showpost.php?p=22427309&postcount=2433
2012-02-12 Same patch by optimus x: http://forum.xda-developers.com/showpost.php?p=22437220&postcount=2456
APK
2012-02-14: ICS Stock launcher: http://forum.xda-developers.com/showpost.php?p=22537697&postcount=53
FAQ
Why did lupohirp take this on?
Because he is awesome.
Is it for everyone?
No, but you can have it.
What baseband?
Any, new works out of the 'box'. Old has instructions above.
What is KGSL?
I have no idea yet.
Why does this port use the 2.6.35 kernel instead of 3.0.x.x
I still don't know.
Can someone improve the answers above?
Yes, just reply to this thread and tag your answers with #FAQ
More Help
original support thread by sweetbinodray
Cool. Does overclocking work? What if I use LG camera from the market? Will I be able to use the camera?
Sent from my LG-P500 using XDA App
sms isnt working for me, although calling does.
wizagg said:
Cool. Does overclocking work? What if I use LG camera from the market? Will I be able to use the camera?
Sent from my LG-P500 using XDA App
Click to expand...
Click to collapse
Overclockin works, camera wont work even if u use a 3rd party app since the basic problem lies in the software(the ROM)... the system cant connect to camera...
gontadu said:
P.S. adfad666 has advised against doing this because of a risk of corruption. I don't know why, I couldn't get them in any other way so I took the risk since the fix is just a recovery away, so if you do this its your own risk
Click to expand...
Click to collapse
adfad has warned against using the LGMDP/KDZ method when you are on CM9. No problems in copying a few files.
Ramis93 said:
sms isnt working for me, although calling does.
Click to expand...
Click to collapse
SMSing will work when you copy the file libwms.so to /system/lib as well. Get that file from the A8 rom (in /system/lib).
gontadu said:
Hi all,
So this is just to help noobs and similar with what I tried so that I got the CM9 port by lupohirp to work. As you know the CM9 thread is devs/geeks only and not quite intended for feedback and discussion.
P.S. Lupohirp, this is just to help you and not to take away any of your credit!!
A brief background so that those with similar situations can relate and not ask too many questions. I asked all that I needed so I don't think you should have more. And if you do, I am unable to answer most of those.
So here goes:
- I first had stock Froyo
- Then Rooted with z4root and got ClockworkMod and so on
- then put on CM7 by mik_os which works with old baseband only.
(baseband is the bit that allows your phone to talk to a cellular network)
So the baseband story once again after the hundreds of posts on it. Froyo (2.2.x) from LG has the old baseband. Those LG phones that got upgraded to factory gingerbread (2.3.x) were also upgraded to the new baseband. However coming to custom ROMs the story is different. Some work with the old e.g. mik_os CM7 and some work with new e.g. official CM7 by adfad666 and unofficial CM9 by lupohirp.
That means, since I had Froyo and then moved to mik_os CM7, I still have old baseband.
- moving to today, I wanted a new ROM and got excited by the CM7 and CM9 ports. Both said they want new baseband.
Two ways of going about this:
1. Upgrade to new baseband via the various ways (KDZ, etc) which seems to be a bit scary from the instructions though it might not be!
2. Get old baseband to work with the new ROMs. This is possible based on what I read here
So I decided to go with Option 2 since, baseband can be upgraded/downgraded irrespective of the ROM. The difference will always be that only one will work by default and the other one is a patch away.
So now,
- I got the zip file for the cm9 beta from that thread
- I got appropriate gapps (ics 4.0.3 versions not gb)
- I got the old baseband fix from the baseband link in Option 2 above.
- I put the gapps and the cm9 zip in the root of the sdcard for ease of access
Now using ClockworkMod 5.0.2.0 (remember 5.0.2.0 is for old (and probably new) baseband and 5.0.2.7 is for new)
- wiped /cache, /data, /system, /sd-ext
- left /boot as is. This is of utmost importance. You wipe this, you're on your own (ok not so bad but if you do, do not RESET your phone, learn how to get it back and then fix it)
- and /sdcard contains the new files
So then the usual route, flash the zip after selecting it. obviously CM9 first. Then the gapps file. You can do the gapps file after a restart as well.
Now everything should be ok except your cell signal. That should be dull/inactive, etc. If you go phone status it will also not have much there.
So now get the old baseband fix files. extract to a folder of choice. adb push these two files to /system/lib/
P.S. adfad666 has advised against doing this because of a risk of corruption. I don't know why, I couldn't get them in any other way so I took the risk since the fix is just a recovery away, so if you do this its your own risk
I then rebooted the phone and all was well.
Tested 2G and 3G and data as well. I didn't see whether it did HSDPA or not. The SIM also had all the APNs etc ready.
Will try improve this thread if time permits.
What I know does not work so far in my experience:
- WiFi status bar indicator is dull although the connection is fine
- Camera does not work with standard Camera app and Camera ZOOM FX
- Link2SD is unable to create mount scripts no matter the partition file system so its a bit of a pain now to install apps
All the above are known issues.
Click to expand...
Click to collapse
this is all what im looking for! no more backread a thousand post and searches non-sense results! thanks a lot dude!
mihir287 said:
adfad has warned against using the LGMDP/KDZ method when you are on CM9. No problems in copying a few files.
SMSing will work when you copy the file libwms.so to /system/lib as well. Get that file from the A8 rom (in /system/lib).
Click to expand...
Click to collapse
Thanks for that!!!
Ok so, can you get us the file so I can just edit my post and put it there. Indeed my sms doesn't work and I had not checked until now. After getting it, you or I can ask adfad666 to edit his baseband description.
gontadu said:
Thanks for that!!!
Ok so, can you get us the file so I can just edit my post and put it there. Indeed my sms doesn't work and I had not checked until now. After getting it, you or I can ask adfad666 to edit his baseband description.
Click to expand...
Click to collapse
He knows about this, he just hasn't got around to editing his post.
gontadu said:
- Link2SD is unable to create mount scripts no matter the partition file system so its a bit of a pain now to install apps
Click to expand...
Click to collapse
Link2SD very much works with ext2 partition,using it from ALPHA3,working well with latest FRANCO_3.0 kernel too!
Has it worked with all the kernels??
EDIT: I have now added a link to sweetbinodray's thread for more support before we go nagging the devs !
Old baseband fix
The old baseband fix does not work, I copied the files from the zip folder over but my phone still has no network, can anybody help me?
Kernels has nothing to do with mobile data...and I'm glad someone has said something about this thread,I imagine OP faces same problem as me ? T-Mobile USA,I'd assume ? You go to flash new baseband (v20g) than flash cm9..you get working wifi and notification signal bars illuminated but no signal status icon ie...3g/hdma ? From what I know, these fixes are being worked on..
Sent from my LG-P500 using xda premium
matthiastan5 said:
The old baseband fix does not work, I copied the files from the zip folder over but my phone still has no network, can anybody help me?
Click to expand...
Click to collapse
I am not sure why. I have old baseband. I flash the images as usual. And when I feel like it, I overwrite the files with the old baseband fix and everything works. Including the status indicator for 3g hspa. The wifi indicator doesn't display signal strength but everyone knows that. As far as I know some sims still have issues and that is with regards to getting apn info out of the sim.
If the normal fix doesn't work, why don't you try aspee fix?
Jrhodes85 said:
Kernels has nothing to do with mobile data...and I'm glad someone has said something about this thread,I imagine OP faces same problem as me ? T-Mobile USA,I'd assume ? You go to flash new baseband (v20g) than flash cm9..you get working wifi and notification signal bars illuminated but no signal status icon ie...3g/hdma ? From what I know, these fixes are being worked on..
Sent from my LG-P500 using xda premium
Click to expand...
Click to collapse
Yes indeed kernels and mobile data files are independent from what we see here. Actually my issue was using these ROMs that needed new baseband. So a lot were asking about old baseband. So I looked around and put a thread about it. I stayed away from new baseband since its a lot more of a risky upgrade than a ROM flash!
It is risky,I had a scare recently when I had a ln AMSS error and phone was stuck on emergency mode (god I'm glad I didn't take the battery out or disconnect) I've flashed from v10e to v20g about 6 times..I stuck to v10e with using old baseband fix...I've been wanting to find a reason why tmobile usa doesn't have working 3g/hdma etc... on v20 basebands versions but I'm sure someone will have fixed soon...as far as cm9 ? I have personally not tested using old baseband fix but I've heard from more people about it not working than from people saying it works,even Arjen himself recommended me to do that,good guy...I still have yet to figure out why we can't add apn's manually
Sent from my LG-P500 using xda premium
gontadu said:
I am not sure why. I have old baseband. I flash the images as usual. And when I feel like it, I overwrite the files with the old baseband fix and everything works. Including the status indicator for 3g hspa. The wifi indicator doesn't display signal strength but everyone knows that. As far as I know some sims still have issues and that is with regards to getting apn info out of the sim.
If the normal fix doesn't work, why don't you try aspee fix?
Click to expand...
Click to collapse
Can you post a link for the aspee fix?
Sent from my LG-P500 using XDA Premium App
http://forum.xda-developers.com/showthread.php?t=1443473
There's the fix
mihir287 said:
adfad has warned against using the LGMDP/KDZ method when you are on CM9. No problems in copying a few files.
Click to expand...
Click to collapse
So now, for cm9, should we switch to new baseband LGMDP method or should we choose the second option on continueing with old baseband...??
I would take 2nd option
Sent from my LG-P500 using xda premium
Hi all, I'm posting here because I haven yet gotten the privilege to post in the development section, although I've been following android development keenly. Okay, I'd like to bring it to the notice of the dev of NightlyFourE.. that I flashed the latest version of his ROM ie V4.3.2 yesterday on my Optimus One with the old baseband, and downloaded the old baseband fix from PerfectPeso's website (aspee's patch didn't work for me)
Everything worked fine, until I found out that data doesn't work after I disable it and again try to re-enable it.. once or twice it did.. and then the same thing. I tried rebooting too.
Not that I'm complaining, just wanted to bring it to the notice of the dev, he and the community might find this interesting
Upgrade to new BB
Have you tried aspee's old baseband fix instead,I've used that one on nearly every new baseband rom other than blackbird or cm9..look for fix in dev section.the title of the tread is old baseband fix
Sent from my LG-P500 using xda premium
OP you have T-Mobile USA right ? If you ever need the apn's,let me know
Sent from my LG-P500 using xda premium
Downloaded aspee's fix.. Works
When I'd previously downloaded, it was some 50-60kB.. this time it was 2.7mB so I guess something was wrong with the previous fix
Works like a charm
@Jrhodes85: Thanks buddy but I'm an airtel user, India
yash3339 said:
Hi all, I'm posting here because I haven yet gotten the privilege to post in the development section, although I've been following android development keenly. Okay, I'd like to bring it to the notice of the dev of NightlyFourE.. that I flashed the latest version of his ROM ie V4.3.2 yesterday on my Optimus One with the old baseband, and downloaded the old baseband fix from PerfectPeso's website (aspee's patch didn't work for me)
Everything worked fine, until I found out that data doesn't work after I disable it and again try to re-enable it.. once or twice it did.. and then the same thing. I tried rebooting too.
Not that I'm complaining, just wanted to bring it to the notice of the dev, he and the community might find this interesting
Click to expand...
Click to collapse
hey guy !!NightlyFourE v4.3.2 only for new bb , why are u use baseband fix from PerfectPeso's website ? if this way succesdfull dave of NightlyFourE said it'd for both-bb , plz read the information about rom before flash,.
I am apprehensive updating to new baseband. So I used the old BB patch.. used the one from PerfectPeso's website because aspee's earlier patch didn't work. The new updated one does.
snow_boy1709 said:
hey guy !!NightlyFourE v4.3.2 only for new bb , why are u use baseband fix from PerfectPeso's website ? if this way succesdfull dave of NightlyFourE said it'd for both-bb , plz read the information about rom before flash,.
Click to expand...
Click to collapse
he mentioned it in the later posts that the rom can be used with the old bb too...
I'm a US T-Mobile user, the new CM nightly 20120303(#35 essentially) has working data now without patching for new BB. Old BB fix works too.
Sent from my LG-P500 using Tapatalk
@Paulenski oh, so it was basically a bug in the previous nightlies, I assume. Awesome that they've made it work.