hey folks going to try to unlock today but need phone up and running was wondering if anyone knows about how long the whole process takes from unlocking to back up and running? also trying to download the 198_7 sbf but having trouble finding a working link keep getting redirected to a mophoforum... any help would be great really kinda uneasy about doing it.... thanks.
Sent from my MB855 using xda premium
Once you download all the things you need 10-20 mins
Sent from my MB855 using xda premium
198-7
http://forum.xda-developers.com/showpost.php?p=19457549&postcount=1128
Sent from my MB855
ok so ive unlocked but now trying to get root back used the method listed in qbking video diidnt work tried the ocr didnt work anyone know how or what im doing wrong both root methods went through successfully but im still not rooted su and rootchecker and bb installed to try and verify root but is a no go thanks for anymore info you guys can offer...
if i use the 198_7 sbf it relocks me right?
should i use the 198_7 then unlock then root
i unlocked on 198_6 like i said everything went fine i just dont have root
spleef said:
ok so ive unlocked but now trying to get root back used the method listed in qbking video diidnt work tried the ocr didnt work anyone know how or what im doing wrong both root methods went through successfully but im still not rooted su and rootchecker and bb installed to try and verify root but is a no go thanks for anymore info you guys can offer...
if i use the 198_7 sbf it relocks me right?
should i use the 198_7 then unlock then root
i unlocked on 198_6 like i said everything went fine i just dont have root
Click to expand...
Click to collapse
Sbf 198-7 then unlock, flash clockwork recovery, flash rom of choice.
Sent from my MB855
devastatorx said:
Sbf 198-7 then unlock, flash clockwork recovery, flash rom of choice.
Sent from my MB855
Click to expand...
Click to collapse
dont root just sbf unlock recovery then rom ?
That's easiest to do. That's what I've been doing.
k so ive sbf'ed unlocked and got cwm recovery on me mopho so now i flash in recovery a custom rom do i need to factory reset wipe all user data wipe cache or dalvick cache? and not sure how doing it this way i get root back can anyone enlighten me.
whatever custom rom you flash will be already rooted. only the sprint sbf files will require a reroot
spleef said:
k so ive sbf'ed unlocked and got cwm recovery on me mopho so now i flash in recovery a custom rom do i need to factory reset wipe all user data wipe cache or dalvick cache? and not sure how doing it this way i get root back can anyone enlighten me.
Click to expand...
Click to collapse
Wipe data, cache, and dalvik, then flash your rom of choice
Sent from my MB855
devastatorx said:
Wipe data, cache, and dalvik, then flash your rom of choice
Sent from my MB855
Click to expand...
Click to collapse
so say i install a rom then want to try a different one do same wiping process? thank you so much you guys helped me alot so far flashed skinnyrev1 then tried jokerstockrev1 but it still said skinny in the about phone so not sure if i did it right cause nothing changed
spleef said:
so say i install a rom then want to try a different one do same wiping process? thank you so much you guys helped me alot so far flashed skinnyrev1 then tried jokerstockrev1 but it still said skinny in the about phone so not sure if i did it right cause nothing changed
Click to expand...
Click to collapse
Unless otherwise stated its always safest to wipe data, cache, and dalvik.
You can ask joker about that, he's really quick to reply. If I had to guess though, id say both roms are using the same build.prop file, or you may have mistakenly reflashed skinny. Glad I could help.
Sent from my MB855
Related
I finally put android 2.3.4 on my atrix. But Im pretty sure that I lost root. How can I get it back?! Can I run gingerbreak.apk and everything turn out ok? Just curious.
Oh, and when the hell are we gunna get cyanogenmod????
~MDK666
Lazy...
http://forum.xda-developers.com/showthread.php?t=1159572
Yeah, download that zip, reboot into recovery and install zip from sd. Reboot and you are done
The best and easiest way is to root with oneclicksuperroot on xda. Type this in google.
Sent from Motorola Atrix
Foka002 said:
The best and easiest way is to root with oneclicksuperroot on xda. Type this in google.
Sent from Motorola Atrix
Click to expand...
Click to collapse
Superoneclick hasnt worked on the atrix since 1.26... They closed that loophole a longgggg time ago
CWM + root.zip =
If you don't have/want CWM, this also works:
http://forum.xda-developers.com/showpost.php?p=15023022&postcount=3
jhild352 said:
Superoneclick hasnt worked on the atrix since 1.26... They closed that loophole a longgggg time ago
CWM + root.zip =
Click to expand...
Click to collapse
Well I've rooted mine so I don't know what you are talking about...
Sent from Motorola Atrix
humjaba said:
Lazy...
http://forum.xda-developers.com/showthread.php?t=1159572
Click to expand...
Click to collapse
That method hasn't worked for me. I applied the zip via CWM and it does says rooting complete. My BL is unlocked and CWM was flashed properly. Any ideas on what I should do?
Sent from my MB860 using XDA App
Deggy said:
That method hasn't worked for me. I applied the zip via CWM and it does says rooting complete. My BL is unlocked and CWM was flashed properly. Any ideas on what I should do?
Sent from my MB860 using XDA App
Click to expand...
Click to collapse
Sometimes you have to run root.zip again. Clear Dalvik, cache, and factory before root.zip, then clear all again and reboot. Try that.
CaelanT said:
Sometimes you have to run root.zip again. Clear Dalvik, cache, and factory before root.zip, then clear all again and reboot. Try that.
Click to expand...
Click to collapse
Just tried you advice. Still unrooted. Wiped the two different caches, factory reseted, applied the root twice. Nothing. I miss Titanium Backup.
I wonder if it's because im official stock ROM vs a custom ROM.
Sent from my MB860 using XDA App
This method worked fine for me. Thanks.
Eval thanks for all your hard working. Do you think is possible to update your OP, so it is clear for "noobs" that the second part of your code need to be input in adb
I found a lot of people trying to run the second code in the fastboot mode and then posting oh IT DID NOT work and actually is EASY and SAFE to root
eval- said:
If you don't have/want CWM, this also works:
http://forum.xda-developers.com/showpost.php?p=15023022&postcount=3
Click to expand...
Click to collapse
Sent from my MB860 using XDA App
--------------------------------------------------------------------------------------
I am a rooted user, and when I turn on the phone I get delays. I have to wait 30 minutes before I can use the phone. I cannot type in a keyboard. I cannot do anything including making a call. This also happens every couple of hours.
I cannot sbf my phone. There is something wrong with it.
I cannot update the phone.
Here's what I have done:
- Tried to CWM backup, sbf, update, root, install cwm and restore backup
- Clear cache.
- tried different sbf
- tried updating rsd lite
--------------------------------------------------------------------------------------------------------------------------------
So far, I have the following suggestions that may work:
- FACTORY RESET THROUGH CWM. - FAILED
- FLASHING MR3 SBF - FAILED
- FLASHING 154_5 - FAILED
EDIT: SHABBYPENGUIN IS HELPING ME GET IN CONTACT WITH A DEV WHO CAN HELP ME.
deedscreen said:
I am a rooted user, and when I turn on the phone I get delays. I have to wait 30 minutes before I can use the phone. I cannot type in a keyboard. I cannot do anything including making a call. This also happens every couple of hours.
I cannot sbf my phone. There is something wrong with it.
I cannot update the phone.
Here's what I have done:
- Tried to CWM backup, sbf, update, root, install cwm and restore backup
- Clear cache.
I am fed up! Someone please help! What can I do.
SBF ALWAYS FAILS ON MY PHONE!!!
Click to expand...
Click to collapse
Back up your apps on Titanium...then wipe data/factory reset go through rooting and installing cwm after you run through all the updates.
KTT16 said:
Back up your apps on Titanium...then wipe data/factory reset go through rooting and installing cwm after you run through all the updates.
Click to expand...
Click to collapse
A factory reset does not allow me to update on my phone. This phone is unusable!!! I cannot stand this anymore!
"CWM backup, sbf, update, root, install cwm and restore backup"
why would you update to only then restore pre update?
factory reset is very misleading, it only applies to a user that never rooted or messed with their system. all it does is wipe cache/data/and dalvik. the reason why you cant update is one because you have cwm, 2 because im banking on you have missing /system/app stuff. which then fails the md5 hash check of the update.zip. i dont know what kind of issues your having or running into with sbf. but that is the only way to get back to stock.
shabbypenguin said:
"CWM backup, sbf, update, root, install cwm and restore backup"
why would you update to only then restore pre update?
factory reset is very misleading, it only applies to a user that never rooted or messed with their system. all it does is wipe cache/data/and dalvik. the reason why you cant update is one because you have cwm, 2 because im banking on you have missing /system/app stuff. which then fails the md5 hash check of the update.zip. i dont know what kind of issues your having or running into with sbf. but that is the only way to get back to stock.
Click to expand...
Click to collapse
So basically i'm s*rewed?
interesting, I have used sbf_flash 5 times today - given my nand a good work out - and have yet to have a single fail...well one fail cause I didn't Su, but that was my fault. :-/
Any ways - have you tried a different USB Port and a different Cable?
I am assuming you are on windows? - could be a bad assumption but proably not.
Did you install the latest drivers?
Have the latest RSD?
Tried another copy of the SBF file? - I had one that didn't quite work right in a droid x once, bad download.
Just trying to get a solution for you.
deedscreen said:
A factory reset does not allow me to update on my phone. This phone is unusable!!! I cannot stand this anymore!
Click to expand...
Click to collapse
Wow, are you serious? Hmm..I'm not sure what the problem might be. Seriously, you need to start from scratch somehow...so there are 2 ways you can wipe data/reset:
1) Through CWM Recovery
2) Through Settings>Privacy>Factory Reset
Try either way first. When you tried to reset, what happened? Can you provide some details as to the Settings>About Phone? Anything for us to go on to help?
Let me know how it works out for you!
Good luck!
K
Kcarpenter said:
interesting, I have used sbf_flash 5 times today - given my nand a good work out - and have yet to have a single fail...well one fail cause I didn't Su, but that was my fault. :-/
Any ways - have you tried a different USB Port and a different Cable?
I am assuming you are on windows? - could be a bad assumption but proably not.
Did you install the latest drivers?
Have the latest RSD?
Tried another copy of the SBF file? - I had one that didn't quite work right in a droid x once, bad download.
Just trying to get a solution for you.
Click to expand...
Click to collapse
- Over (10) Ten .SBF Fails
- Tried Different USB Cables
- Tried Different Ports
- Tried Uninstalling RSD Lite & Reinstalling
- Tried another .SBF file, (haha I have the Droid X also).
It says the phone failed. What do I do?
ktt16 said:
wow, are you serious? Hmm..i'm not sure what the problem might be. Seriously, you need to start from scratch somehow...so there are 2 ways you can wipe data/reset:
1) through cwm recovery
2) through settings>privacy>factory reset
try either way first. When you tried to reset, what happened? Can you provide some details as to the settings>about phone? Anything for us to go on to help?
Let me know how it works out for you!
Good luck!
K
Click to expand...
Click to collapse
that's it!!! I haven't done a factory reset from cwm. I will try that!
Maybe a dumb question but are you booting the phone into RSD?
shabbypenguin said:
"CWM backup, sbf, update, root, install cwm and restore backup"
why would you update to only then restore pre update?
factory reset is very misleading, it only applies to a user that never rooted or messed with their system. all it does is wipe cache/data/and dalvik. the reason why you cant update is one because you have cwm, 2 because im banking on you have missing /system/app stuff. which then fails the md5 hash check of the update.zip. i dont know what kind of issues your having or running into with sbf. but that is the only way to get back to stock.
Click to expand...
Click to collapse
I think this is a good question to ask you specifically. Does the factroy reset through CWM work any different?
Kcarpenter said:
Maybe a dumb question but are you booting the phone into RSD?
Click to expand...
Click to collapse
Yes I am, (I am not offended. LOL. Thanks for asking though. I appreciate the thought.)
Anyone still with suggestions?
Anyone?
Anyone still with suggestions or am I s*rewed?
How did the reset using cwm work out for you?
Sent from my MB855 using xda premium
try different version of rsd.
some other guy also faced issue:http://forum.xda-developers.com/showpost.php?p=16340949&postcount=48
KTT16 said:
How did the reset using cwm work out for you?
Sent from my MB855 using xda premium
Click to expand...
Click to collapse
I have to do a backup of my phone first. I will either post or PM you, to let you know of the success.
rohit3192 said:
try different version of rsd.
some other guy also faced issue:http://forum.xda-developers.com/showpost.php?p=16340949&postcount=48
Click to expand...
Click to collapse
Can you send me a link to the thread not just that specific post.
That would be greatly appreciated.
http://forum.xda-developers.com/showthread.php?p=16340949#post16340949
Well, this is what I'm going to do
I am going to get the Samsung Rant or the LG Remarq for the time being.
deedscreen said:
I am going to get the Samsung Rant or the LG Remarq for the time being.
Click to expand...
Click to collapse
the person who started mopho fan club ditched the phone after 2days
ok so im confused. i just got my photon and i have unlocked it and rooted it and got cwm on it fine. but now i need to update to 198-7 for jokers rom, now im not sure where to find the sbf's and do i just go straight to 198-7 from my 154-5??? "as these are based on 198-7 you need to have sbf'ed 198-7 first (it doesnt flash updated radio)" and i just flash with rsd? like i had to for root on the unlocked boot loader? and finaly where do i get the sfb? thanks for all the help. im just new to photons.
thanks
You need to install RSD LITE and flash to 198-7 before applying the jokers locked 4g via bootstrap.
Read everything in this thread first for info on doing this.
http://forum.xda-developers.com/showthread.php?t=1202666
Then since the links are dead you can get the files from
http://www.holylivingfuck.com/ACS/SBFs/
Before flashing make sure your battery is greater than 50percent full. 100percent is better.
There is a quick instruction list I posted earlier for someone with a bricked phone. Dont care to rewrite it so here you go.
http://forum.xda-developers.com/showthread.php?t=1412153
So read , read read, copy and paste **** in a cheat sheat document and dont skip any steps... Good luck and know if you messup and you think the phone could be bricked you can always flash back via RSD lite... Long as you have plenty of battery.
Just thought i should say- im that fool with the bricked phone haha this worked perfect but i did get an error about "BD" or something at the end, i dont remember the exact error but i ignored it and sure enough it worked just fine!
Sent from my MB855 using xda premium
Joker's ROMs are based on 198_7, so you will need to flash it. ShabbyPenguin's holylivingfuck site has the 198_7 ROM. I flashed 198_7 first before unlocking, so I'm not sure, but I'm guessing the 198_7 ROM will re-lock the bootloader in which case you will have to unlock again.
It will also unroot the phone.
Yep flashing the sbf with rsd lite will restore the stock bootloader.
---------- Post added at 07:14 PM ---------- Previous post was at 07:08 PM ----------
Good to hear you got it back.. The phone is a bit more resilient than we think.
It is nice to have a fallback incase something doesnt work right.. Start using titanium backup for quick restorations or partial restorations and you wont lose anything text conversations etc..
TheChronicDroid said:
Just thought i should say- im that fool with the bricked phone haha this worked perfect but i did get an error about "BD" or something at the end, i dont remember the exact error but i ignored it and sure enough it worked just fine!
Sent from my MB855 using xda premium
Click to expand...
Click to collapse
The reason for flashing 198-7 is to ensure everything non-flashable is up to date and to know you have read enough to save your self in an emergency. Sbf's are our master reflashes that fix screw ups. It is possible to flash joker roms on 198-6(latest ota) but i want people to have a consistent experience along with the tools to fix problems already in place.
It may not be as easy as other phones but we are working on that.
Also the dev section has a great sticky by loki with links and instructions to nearly everything
Sent from my MB855 using XDA App
Makes sense. I thought it was to do with the deodexing of 198-7. Good to hear more into it from the man himself.
jokersax11 said:
The reason for flashing 198-7 is to ensure everything non-flashable is up to date and to know you have read enough to save your self in an emergency. Sbf's are our master reflashes that fix screw ups. It is possible to flash joker roms on 198-6(latest ota) but i want people to have a consistent experience along with the tools to fix problems already in place.
It may not be as easy as other phones but we are working on that.
Also the dev section has a great sticky by loki with links and instructions to nearly everything
Sent from my MB855 using XDA App
Click to expand...
Click to collapse
thanks for all the replys guys. i might do this later. it just takes so long you have to have a long time when you know you wont use your phone. haha =) thanks for the help guys.
OK now I'm confused,
I'm on 198-6
Rooted via torpedo
Installed bootstrap apk
Wiped all user data
Wiped dalvic cache x3
Installed skinny4g
Rebooted wiped dalvic cache x3
installed black out theme
I'm thinking skinny4g is deoxidized because i have flashed multiple themes?
Haven't had a hiccup or reboot yet
Running smooth
Am i missing something???
Sent from my MB855 using Tapatalk
Reason he would like everyone on a standard platform is for control over the testing.. Rhetorics but 198_6 may have force close and 198_7 may not. No need to diagnose problems that aren't on the approved platform..
He is not saying you cannot use 198_6 but it makes it easier if everyone use 198_7 for testing his rom's.
ttkyles said:
OK now I'm confused,
I'm on 198-6
Rooted via torpedo
Installed bootstrap apk
Wiped all user data
Wiped dalvic cache x3
Installed skinny4g
Rebooted wiped dalvic cache x3
installed black out theme
I'm thinking skinny4g is deoxidized because i have flashed multiple themes?
Haven't had a hiccup or reboot yet
Running smooth
Am i missing something???
Sent from my MB855 using Tapatalk
Click to expand...
Click to collapse
ScottieRotten said:
Reason he would like everyone on a standard platform is for control over the testing.. Rhetorics but 198_6 may have force close and 198_7 may not. No need to diagnose problems that aren't on the approved platform..
He is not saying you cannot use 198_6 but it makes it easier if everyone use 198_7 for testing his rom's.
Click to expand...
Click to collapse
Oh OK
So 198-7 wont become available OTA from Motorola?
And [email protected]## links for 198-7 are dead.
Ooooops mad bad Opera mobile downloads fine
Sent from my MB855 using xda premium
ttkyles said:
Oh OK
So 198-7 wont become available OTA from Motorola?
And [email protected]## links for 198-7 are dead.
Sent from my MB855 using xda premium
Click to expand...
Click to collapse
Links just worked for me.
http://www.holylivingfuck.com/ACS/SBFs/
6bowmans said:
Links just worked for me.
http://www.holylivingfuck.com/ACS/SBFs/
Click to expand...
Click to collapse
Yea thanks just swiched to Opera
Sent from my MB855 using xda premium
How do I unroot/un brick my device I'm stuck on the red logo and it wont boot up please help tyvm
Sent from my SPH-D700 using xda premium
I know it's the last ditch effort, but have you tried to SBF the phone?
Idk how to sbf can u give me info or where to find the info at ty
Sent from my SPH-D700 using xda premium
here's a tutorial on how to do it, but keep in mind that it's a factory restore. You'll lose root and other important info, you'll be back on the factory settings.
http://forum.xda-developers.com/showthread.php?t=1317707
datharo said:
here's a tutorial on how to do it, but keep in mind that it's a factory restore. You'll lose root and other important info, you'll be back on the factory settings.
http://forum.xda-developers.com/showthread.php?t=1317707
Click to expand...
Click to collapse
Tyvm
Sent from my SPH-D700 using xda premium
datharo said:
here's a tutorial on how to do it, but keep in mind that it's a factory restore. You'll lose root and other important info, you'll be back on the factory settings.
http://forum.xda-developers.com/showthread.php?t=1317707
Click to expand...
Click to collapse
Won't really lose important info unless you need to data wipe to stop a boot loop
Sbf itself doesn't wipe data...just puts the system back to stock factory condition....
Most of time you will need to wipe data after sbf tho which of course wipes ya clean.....remember ....front to back (couldn't resist lol)
ashclepdia said:
Won't really lose important info unless you need to data wipe to stop a boot loop
Sbf itself doesn't wipe data...just puts the system back to stock factory condition....
Most of time you will need to wipe data after sbf tho which of course wipes ya clean.....remember ....front to back (couldn't resist lol)
Click to expand...
Click to collapse
You know, I probably should've asked the op if he was able to get into the regular recovery and just doing a data wipe worked before doing a SBF.
I completely forgot to mention that.
datharo said:
You know, I probably should've asked the op if he was able to get into the regular recovery and just doing a data wipe worked before doing a SBF.
I completely forgot to mention that.
Click to expand...
Click to collapse
Lol
I would have suggested sbf also
Whenever I've been stuck at m logo data wipe alone never helped...
Always had to sbf AND data wipe to get back
ashclepdia said:
Lol
I would have suggested sbf also
Whenever I've been stuck at m logo data wipe alone never helped...
Always had to sbf AND data wipe to get back
Click to expand...
Click to collapse
The worst I've had happen to me is getting stuck in a bootloop. I seriously freaked out and thought I seriously damaged my phone!! I just did a data wipe and all was good.
On a side note, the DX2 is actually my first smartphone. I originally got it out of desperation due to losing my old phone. And I always liked the look of the DX. The phone I had before was a LG enV2 on its last legs. LOL
datharo said:
You know, I probably should've asked the op if he was able to get into the regular recovery and just doing a data wipe worked before doing a SBF.
I completely forgot to mention that.
Click to expand...
Click to collapse
It was stuck on the red logo screen n none of the wipes worked will be trying sbf tomorrow ty all for the help
Sent from my SPH-D700 using xda premium
I'm wondering the same thing. I tried installing cyanogen 7, and it booted and worked fine at first, but when I rebooted, it won't get past the cyanogen 7 boot animation. I don't know what to do?
dismantelope said:
I'm wondering the same thing. I tried installing cyanogen 7, and it booted and worked fine at first, but when I rebooted, it won't get past the cyanogen 7 boot animation. I don't know what to do?
Click to expand...
Click to collapse
Go to link above you I got mine up n running you probably did a bad flash
Sent from my SPH-D700 using xda premium
I recently attempted to root my HTC thunderbolt, and to do so I used the htc dev unlocker and then this "HTC Thunderbolt Tool'
rootzwiki.com/topic/27310-all-in-one-the-htc-thunderbolt-tool
After that I downloaded a rom and installed it through the 4ext recovery, it all install fine and I did do a factory/data reset but whenever I reboot after the rom install, I get the HTC white bootloader and then the screen become black with a back light to it.
I have tried a number of times to re-install the rom and have tried to use other roms but all of them seem to end the same way.
I have used:
BAMF FOREVER 1.1
BAMF MECHA ICS
AIRBORNE GOUI
Killsense 3.7.19
Lightning501
few more
My phone is a HTC Thunderbolt and when I attempted to root the phone it had a hboot version of 1.0.8 and had a stock version of ICS installed.
Sadly I have a phone without a working rom and I had forgot to make a backup so if anyone can help it would be greatly appreciated. Preferably I would like to keep the phone rooted but its not necessary.
Thank You
I'm a total xda-developor noob, so I hope I didn't mis a thread with a the solution all ready on it.
Make sure you do the factory reset, wipe dalvik and cache. Flash the ROM and reboot. Sounds like your missing a step somewhere 8)
Sent from my ADR6400L using xda app-developers app
tburns said:
Make sure you do the factory reset, wipe dalvik and cache. Flash the ROM and reboot. Sounds like your missing a step somewhere 8)
Sent from my ADR6400L using xda app-developers app
Click to expand...
Click to collapse
I have tried clearing everything but still doesn't seem to work.
One thing I forgot to mention is sometimes if I wait long enough on the blank screen It boots me back into the 4ext recovery, don't know if that makes much of a difference.
The way I have been installing the rom
Load ROM onto the SD
Do a "wipe data/factory reset"
Go into install sd and choose the Rom which is in a .zip file
I think this is how its supposed to be done, but not sure.
aplysenko said:
I have tried clearing everything but still doesn't seem to work.
One thing I forgot to mention is sometimes if I wait long enough on the blank screen It boots me back into the 4ext recovery, don't know if that makes much of a difference.
The way I have been installing the rom
Load ROM onto the SD
Do a "wipe data/factory reset"
Go into install sd and choose the Rom which is in a .zip file
I think this is how its supposed to be done, but not sure.
Click to expand...
Click to collapse
You need to wipe cache and dalvik cache too.
Sent from my Nexus 7 using Tapatalk 2
disconnecktie said:
You need to wipe cache and dalvik cache too.
Sent from my Nexus 7 using Tapatalk 2
Click to expand...
Click to collapse
I have done that.
Problem is you were coming from the ICS OTA.
The All In One Tool alone will not get you rooted after taking the OTA.
In order to fully root and s-off after having the OTA loaded, you would need to follow the steps outlined HERE
santod040 said:
Problem is you were coming from the ICS OTA.
The All In One Tool alone will not get you rooted after taking the OTA.
In order to fully root and s-off after having the OTA loaded, you would need to follow the steps outlined HERE.
Click to expand...
Click to collapse
Your link dont work for me, id assume you were pointing to this wonderful thread
Milimbar said:
Your link dont work for me, id assume you were pointing to this wonderful thread
Click to expand...
Click to collapse
Correct Thanks I fixed the link in my first post.
I am using the thread and so far its working, just one last question. Do I have to install and use 4ext, or can I just use clockwork mod?
aplysenko said:
I am using the thread and so far its working, just one last question. Do I have to install and use 4ext, or can I just use clockwork mod?
Click to expand...
Click to collapse
You can use whatever Recovery you want, Clockwork Mod is old and not really suggested to use, especially with newer roms.
I miss the RA recovery I had on my first bolt. I use the ext4 recovery now. Glad Santod was able to help you out!!
Sent from my ADR6400L using xda app-developers app