Since I lack 10 posts I'll have to post here.
My problem is that I tried to root a X10 2.33FW and .71kernel with flashtools.
Downgraded just like the guides said and everything went fine but when it comes to rooting I get stuck like this.
11/023/2011 00:23:37 - INFO - Device connected with USB debugging on
11/023/2011 00:23:39 - INFO - Connected device : X10
11/023/2011 00:23:39 - INFO - Installed version of busybox : N/A
11/023/2011 00:23:39 - INFO - Android version : 2.3.3 / kernel version : 2.6.29
11/024/2011 00:24:02 - INFO - Pushing C:\Flashtool\.\devices\X10\busybox\1.19.0\busybox to /data/local/tmp/busybox
11/024/2011 00:24:03 - INFO - Pushing C:\Flashtool\.\custom\root\zergrush.tar to /data/local/tmp
11/024/2011 00:24:03 - INFO - Running part1 of Root Exploit, please wait
11/024/2011 00:24:07 - INFO - Waiting for device
11/024/2011 00:24:38 - INFO - Running part2 of Root Exploit
11/024/2011 00:24:38 - INFO - Running rootit2
11/024/2011 00:24:38 - ERROR - Cleaning rootit files
Mounting /system R/W
FTError
Any feedback would be helpful.
Thanks in advance.
Which version of Flashtool do you use?
0.5.3.0 is my flash tools version.
I know it obvious thing to say did u set USB debug and allow non-market sources on? If so maybe send a pm to androxyde he'll be able to help u .
Sent from my X10i using XDA App
Ignore first post u said u downgraded? Do u mean u used azuzu kernel downgrade before attempting root?
Sent from my X10i using XDA App
laneyofdeath said:
Ignore first post u said u downgraded? Do u mean u used azuzu kernel downgrade before attempting root?
Sent from my X10i using XDA App
Click to expand...
Click to collapse
Yes, thats the method I used. Kinda guessing I did something wrong? :/
Yeah
You don't need to downgrade, you just need it if you want to unlock your Bootloader. Try to upgrade the Kernel and then try again.
Yeah m8 u dont need to downgrade kernel now to root (zergrush exploit works on gingerbread now whereas a few months ago we had to use azuzu root method). First thing to try would be flash the kernel upgrade & see if it boots (hope it boots but i cant guarantee that). If it doesnt boot up then u need to go grab this:
http://www.multiupload.com/564T6TLUD8.
This is global generic firmware for x10i if you flash this with flashtool it will take u back to stock (u will lose apps & data unfortunately if u dont have backup) when u do this boot up, turn on USB debug & allow non-market apps and then click root button. U dont need to downgrade kernel anymore thats why it failed pal. If u need any more help/ cant get it working pls feel free to pm me & ill explain it in bit more detail (sorry had few beers tonight)
Thanks guys, gonna try that and see what happens. I appreaciate the help!
EDIT- No luck with the kernal upgrade. Grabbing that multiupload and hoping I'll have more luck with that.
No probs pal anytime.
Before I destroy the phone again. Just got it working with upgrade thing.
What guides are the ones still working? The X10 forum is kinda confusing me.
Seviris said:
Before I destroy the phone again. Just got it working with upgrade thing.
What guides are the ones still working? The X10 forum is kinda confusing me.
Click to expand...
Click to collapse
Hey mate I didn't know this for a while but unless u unlock your bootloader u can't brick your device you can always get back to normal using seus or pc companion. If they fail use flashtool to flash what I posted earlier and that will make ur phone like when u first bought it from shop. (also buddy click root button and you should be rooted no problem now u got correct fw)
Sent from my X10i using XDA App
laneyofdeath said:
Hey mate I didn't know this for a while but unless u unlock your bootloader u can't brick your device you can always get back to normal using seus or pc companion. If they fail use flashtool to flash what I posted earlier and that will make ur phone like when u first bought it from shop. (also buddy click root button and you should be rooted no problem now u got correct fw)
Sent from my X10i using XDA App
Click to expand...
Click to collapse
Thanks for all the help!
It's rooted and everything now, jus waiting for rom to download.
So... Got everything ready but can't get xRecovery to work. Can't find any guides either. I do need to install busybox and then xRecovery, right?
Tried installing bot 0.3 and CWM 5.x.x.x with flashtools now.
0.3 doesn't work at all and CWM doesn't let me flash new ROMs. Never been so frustrated in all my life.
Install the latest flashtool, for root and xrecovery. That it.
Read this for guidance http://forum.xda-developers.com/showthread.php?p=10879507
Sent from my X10i using Tapatalk
Seviris said:
So... Got everything ready but can't get xRecovery to work. Can't find any guides either. I do need to install busybox and then xRecovery, right?
Tried installing bot 0.3 and CWM 5.x.x.x with flashtools now.
0.3 doesn't work at all and CWM doesn't let me flash new ROMs. Never been so frustrated in all my life.
Click to expand...
Click to collapse
No need to install busybox it will do this for u just click recovery button and select which one u want (xrec or cwm)
Sent from my X10i using XDA App
After reflashing for the third time installing xRecovery worked. Thanks for all the help guys!
No probs glad I could help
Sent from my X10i using XDA App
Related
Hey all!
Sorry for this thread, I guess there are a lot of those, WHICH I SEARCHED OVER, but most did not have my issue really.
What I did:
I had Wolf Rom v4 working perfectly.
Wanted to get MIUI
Did a backup and full wife and the caches
Flashed in xrecovery the MIUI Prime 003
Now my phone is stuck on the SE logo and doesnt go any further.
I guess I have this because I didnt flash the kernels that come with the rom.
I tried to flash the kernel in flashtool but i get this:
Code:
09/051/2011 21:51:26 - INFO - Preparing files for flashing
09/051/2011 21:51:27 - INFO - Searching Xperia....
09/051/2011 21:51:27 - INFO - Found at USB\VID_0FCE&PID_ADDE\5&36B1F8A7&0&2
09/051/2011 21:51:27 - INFO - Start Flashing
09/052/2011 21:52:33 - INFO -
09/052/2011 21:52:33 - INFO - Flashing loader
09/052/2011 21:52:33 - ERROR - Error flashing. Aborted
09/052/2011 21:52:33 - INFO - Now unplug the device and power it on
09/052/2011 21:52:33 - INFO - Then go to application settings
09/052/2011 21:52:33 - INFO - turn on Unknown Sources and Debugging
But I cant go into the phone and turn on debugging...
I dunno how to repair using the pc companion. If someone could help with step by step that be great.
Can anyone help plz?
P.S.: Back to searching for me until someone can help me out.
Install original firmware with flashtool that what I did and was resolved..thank me if I help
Sent from my X10i using XDA App
Mohanned85 said:
Install original firmware with flashtool that what I did and was resolved..thank me if I help
Sent from my X10i using XDA App
Click to expand...
Click to collapse
Lol,iv been there 2 =)
Sent from my X10i using xda premium
Mohanned85 said:
Install original firmware with flashtool that what I did and was resolved..thank me if I help
Sent from my X10i using XDA App
Click to expand...
Click to collapse
I cant find one for Canada for x10i model... There is US but its x10a...
I am getting the global GGL generic one. I hope that works.
So I just put it in the flashtool/firmware folder and flash it? right?
Yes correct bud
Sent from my X10i using xda premium
bodomfan said:
Yes correct bud
Sent from my X10i using xda premium
Click to expand...
Click to collapse
Awesome, ill let you know how it goes. And hit that thanks button if it works.
Well my x10 booted now, i am rerooting and will be flashing those kernels before I install the MIUI stuff... lol
you didn't forget to unlock your bootloader . did you ?
If you don't , you wont be able to install those custom kernels .
Oodie said:
you didn't forget to unlock your bootloader . did you ?
If you don't , you wont be able to install those custom kernels .
Click to expand...
Click to collapse
I sure did, plus I didnt even install those kernels thats why my x10 got bricked. But I downgraded, rooted, upgraded, unlocked and now it works well.
- Captain Scrat
how to flashh back original frimware
help me plz... i also having the same problem.. but i dunno hw to done with it can u gv me the download link and instrution? i using x8 and i tryed on flashing ,update , pc companian all of it fail to solve my phone problem.. my phone stuck at the se logo after install some rom.. before that i can use update service to solve but nw i cant aredi plz help
ricks33 said:
help me plz... i also having the same problem.. but i dunno hw to done with it can u gv me the download link and instrution? i using x8 and i tryed on flashing ,update , pc companian all of it fail to solve my phone problem.. my phone stuck at the se logo after install some rom.. before that i can use update service to solve but nw i cant aredi plz help
Click to expand...
Click to collapse
Hey, I am glad to help if I can remember how I did it lol.
I think that's how I've fixed this:
1) Downloaded the stock rom for my region from here: http://forum.xda-developers.com/showthread.php?t=936733
2) Fully wiped my phone and flashed with the flash tool (if you don't have the flashtool, get it here: http://androxyde.github.com/Flashtool/)
3) Made sure it boots and works
4) Rooted the phone with the flashtool
5) Made sure it works
6) Followed this guide to unlock the bootloader (it has the downgrading and upgrading that needs to be done too): http://forum.xda-developers.com/showthread.php?t=1254087
7) Flashed customer kernels and custom rom
8) Made sure all works and it did!
I hope this helps! Let me know if you need other assistance.
- Captain Scrat
Tip: if the flashtool not regonize your phone, use pc companion to install the SEMC Usb Driver
to let flashtool regonizing your phone.
howto do: use pc companion, do what it says,
if it says: you have already the new update, press recover, he install the SEMC Usb Driver,
then press cancel.
Now you have the Semc Usb Driver installed on your Pc/Laptop.
Updated with the new kernel from DooMlord.
read this carefully:
http://forum.xda-developers.com/showthread.php?t=1254087
i do this:
1: Please make sure you have enabled usb-debugging in your current rom before starting with this!!
2: flash the azuzu kernel downgrade ftf with flashtool
then do this and download this
http://forum.xda-developers.com/showthread.php?t=1256430
if it no respond just wait, i must have his superuser action regonize
then do this:
3: after unlocking is finish you have to flash azuzu kernel upgrade
4: now power on phone to check if the phone is starting after the unlock (if you are using a custom kernel yet with the bypass method and get stuck in a bootloop enter xrecovery and clear dalvik-cache, then your phone should boot up again fine)
power off phone and flash X10_2.3.3_DooMKernel-v06-FS-BootManager-v1.4.ftf
with flashtool
now reboot your phone and go to XRecovery and install the zipfile: x10_gb_DooMKernel-v05a-FS_wifi modules
power on phone again and if everything is right, read the line under that one
WOOOHOOO!!! Here you are with unlocked bootloader, custom kernel directly loaded AND without reflashing any rom, means you have kept your current installation
Doom his files:
Flash this with flashtool: http://www.multiupload.com/ISV5FMZHJ0
install this with xrecovery: http://www.multiupload.com/XMB0OO8PWH
i do it like this and it works !
Important !! If you are using the Unlocking Bootloader tool, just wait, do nothing,
He must get his acces to superuser, look at the letters/numbers in the tool
[*] >> run ADB in tools as administrator of x10 bootloader dont work, after that it works !
press hard but safely the Thanks button !!
succes !!!
p.s. i help a friend yeeyon1990 and myself and maybe more.
Its working !!
Thanks to:
DooMlord
Mayazcherquoi
9Lukas5
The_Laser
What's the difference of using the latest flashtool 0.4.2 by having stock 2.3.3 firmware and rooting and unlocking the bootloader using the latest flashtool?
Eugene1991 said:
What's the difference of using the latest flashtool 0.4.2 by having stock 2.3.3 firmware and rooting and unlocking the bootloader using the latest flashtool?
Click to expand...
Click to collapse
none except...it´s easier
Crowds said:
none except...it´s easier
Click to expand...
Click to collapse
yes indeed, but i post this, by some peeps dont work the new flashtool.
and i do it like this and yes it works.
This is just a rehash of the guide in the sticky in this section by lukas
It is not an easier method, using flashtool 0.4.2.0 is the currently the easiest method.
gregbradley said:
This is just a rehash of the guide in the sticky in this section by lukas
It is not an easier method, using flashtool 0.4.2.0 is the currently the easiest method.
Click to expand...
Click to collapse
Greg i know mate, but my friend yeeyon1990
have everything tried and this works for him and for me,
he was using the new flashtool but that doesnt work for him(no phone regnize or something) and this one works for him, how i explained here, so that why i makin this thread to help other peeps, i hope you will understand thit, why is start this one.
Regards
lex1986 said:
Greg i know mate, but my friend yeeyon1990
have everything tried and this works for him and for me,
he was using the new flashtool but that doesnt work for him(no phone regnize or something) and this one works for him, how i explained here, so that why i makin this thread to help other peeps, i hope you will understand thit, why is start this one.
Regards
Click to expand...
Click to collapse
OK, if it works some people, but maybe just directing to people to the sticky would be good.
Its always good to help people, I wasnt having a go...many thanks for trying to help people
I am very disappoint :-( I tried every think . And finally using the official Rom of se.
Sent from my X10i using XDA App
I think you missed someone in the credits list.
Sent from my X10i using XDA App
Hzu said:
I think you missed someone in the credits list.
Sent from my X10i using XDA App
Click to expand...
Click to collapse
Guess you mean the_laser?
9Lukas5 said:
Guess you mean the_laser?
Click to expand...
Click to collapse
Yeah thankx, i forgot the...laser
I do it when im home on sunday, sorry to forgot him.
Remember sunday is my birthday!!!
Sent from my X10i phone
lex1986 said:
Yeah thankx, i forgot the...laser
I do it when im home on sunday, sorry to forgot him.
Remember sunday is my birthday!!!
Sent from my X10i phone
Click to expand...
Click to collapse
You can still edit posts from the phone app, long press on the post you need edit, click on modify, click on edit, then add the_laser
Sent from my X10i using xda premium
gregbradley said:
You can still edit posts from the phone app, long press on the post you need edit, click on modify, click on edit, then add the_laser
Sent from my X10i using xda premium
Click to expand...
Click to collapse
you happy now? Hahaha, just kiddin mate, its done and thanks for the info.
Sent from my X10i using XDA Premium App
after flashing azuzu downgrade I can't boot up, it's stuck at SE logo
I reflashed with stock, and tried flashtool's Unlock bootloader option, but I'm stuck there too at 'waiting for device'
bbluff said:
after flashing azuzu downgrade I can't boot up, it's stuck at SE logo
Click to expand...
Click to collapse
Because you now baseband and kernel for 2.1. Thats normal, now unlock your bootloader.
.....flash the azuzu kernel downgrade ftf with flashtool
disconnect usb cable, press power button until phone vibrates shortly and immidiatly connect the usb cable again......
---------- Post added at 12:42 PM ---------- Previous post was at 12:35 PM ----------
bbluff said:
after flashing azuzu downgrade I can't boot up, it's stuck at SE logo
I reflashed with stock, and tried flashtool's Unlock bootloader option, but I'm stuck there too at 'waiting for device'
Click to expand...
Click to collapse
Repair with seus, then root your phone with flashtool 0.4.2.0 and then unlocked bl.
bbluff said:
after flashing azuzu downgrade I can't boot up, it's stuck at SE logo
I reflashed with stock, and tried flashtool's Unlock bootloader option, but I'm stuck there too at 'waiting for device'
Click to expand...
Click to collapse
no man just read better:
then do this and download this
http://forum.xda-developers.com/showthread.php?t=1256430
if it no respond just wait, i must have his superuser action regonize
you must just wait mate and read the letters in the bootloader tool what it do with the superuser (he must get his acces), i got it to. you must do nothing.
just wait patiently and it gonna be alright.
Thanks, it worked. Sorry, it really was simple.
bbluff said:
Thanks, it worked. Sorry, it really was simple.
Click to expand...
Click to collapse
no problem mate, i told it`s working,
i do it with these steps, thats why im posting this.
yes its simple.
read, be smart and its working
cheers
Features:
1.based on 4.0.2.A.0.58 Hongkong brand.
2.64 baseband.
3.420mb userdata partition.
4.easy to root via zergrush method.
5.support install .58/.62 custom rom via recovery.
6.root remains if you install .62 custom rom.
How to install:
Flash the ftf file via Flashtool.
Download Link:
http://www.mediafire.com/?8qq6d21b9lq6vby
i currently have .62 stock, unlocked bootloader and -64 baseband,...can i flash this woth no problems???
tendyfish said:
i currently have .62 stock, unlocked bootloader and -64 baseband,...can i flash this woth no problems???
Click to expand...
Click to collapse
No You will Not have any Problems Flashing, However INterupting the Process Can SoftBrick the Device. But its fixable and for free.
flashing ftf firmware via Flashtool is safe for all phones, so don't worry.
Hey im running r800at on baseband -62, build 3.0.1.b.0.285.
Can i flash this on an r800at ?
Cetus90 said:
Hey im running r800at on baseband -62, build 3.0.1.b.0.285.
Can i flash this on an r800at ?
Click to expand...
Click to collapse
only work on GSM device, i don't know whether your device is GSM or CDMA.
ATT GSM R800at
Cetus90 said:
ATT GSM R800at
Click to expand...
Click to collapse
should work, but i can't promise you.
if i understand it properly, it means when i use use this firmware.. i can flash any ROM despite that ROM requirements is .58 or .62?
I've just installed this on my R800at, its working fine, thank you
using this one right now. but do you mind telling what's in it? have used for a time the .58 Hong Kong version. but this one with a fresh install I could feel its a lot faster without any tweak or script. I can see the /dev/block/ is fully loaded.
thumps up. really
for now good battery times but again. was calibrated.
games run smoothly.
Soulfly1976 said:
using this one right now. but do you mind telling what's in it? have used for a time the .58 Hong Kong version. but this one with a fresh install I could feel its a lot faster without any tweak or script. I can see the /dev/block/ is fully loaded.
thumps up. really
for now good battery times but again. was calibrated.
games run smoothly.
Click to expand...
Click to collapse
In this ftf file:
baseband(adsp.sin, amss.sin, amss_fs.sin, fota0.sin, fota1.sin, simlock.ta) and kernel(kernel.sin) are from r800i .62 generic firmware.
system.sin is from r800i .58 hongkong firmware.
cache.sin, loader.sin, userdata.sin is from lt18i firmware.
This is going to sound really dumb.. but after I flashed this, I can no longer root. SuperOneClick no longer works.
sairaku said:
This is going to sound really dumb.. but after I flashed this, I can no longer root. SuperOneClick no longer works.
Click to expand...
Click to collapse
Download the Flashtool and root your Phone
Edit:
:/ U flashed the phone with the flashtool already
Just click the root icon
Keep USB debugging on
zaryab said:
Download the Flashtool and root your Phone
Edit:
:/ U flashed the phone with the flashtool already
Just click the root icon
Keep USB debugging on
Click to expand...
Click to collapse
Thank you. I have tried that though, and it just stops at step 2. This is what I get:
Killing ADB server... KillServer 1.06s
Starting ADB server... StarServer 4.15s
Also on the side it says: *daemon not running. Starting it now on port 5037*
* daemon started successfully*
Then nothing. If I click ROOT again, it just redoes this. I shall keep trying though.
Edit: Used Unlock Root program and it did the job. Thanks though for helping out!
Hi guys, having some trouble flashing this via Flashtool.
So, I'm on .62 firmware , and wanting to finally root again but when I connect my Play (R800i, UK) I get this error
10/020/2012 18:20:13 - INFO - Searching Xperia....
10/020/2012 18:20:33 - INFO - Found at USB\VID_0FCE&PID_ADDE\5&32358991&0&8
10/020/2012 18:20:33 - INFO - Start Flashing
10/020/2012 18:20:33 - INFO - VER="R9A021";DATE="20110128";TIME="11:49:00";
10/020/2012 18:20:33 - INFO - Flashing loader
10/021/2012 18:21:39 - INFO -
10/021/2012 18:21:39 - INFO - Flashing adsp.sin
10/021/2012 18:21:39 - ERROR - Error flashing. Aborted
10/021/2012 18:21:39 - INFO - Now unplug the device and power it on
10/021/2012 18:21:39 - INFO - Then go to application settings
10/021/2012 18:21:39 - INFO - turn on Unknown Sources and Debugging
10/021/2012 18:21:39 - INFO - Preparing files for flashing
And then it stops there. I've tried rebooting, re-copying the ftf, re-extracting, everything.
Cant get this to work
Any help is appreciated! Thanks
Read the log again and you will understand.
Sent from my R800i using xda app-developers app
sasukekun67 said:
Read the log again and you will understand.
Sent from my R800i using xda app-developers app
Click to expand...
Click to collapse
Unknown Sources and USB Debugging are already on.
Should I unlock the bootloader first?
Sent from my R800i using Tapatalk 2
popeye007 said:
Should I unlock the bootloader first?
Sent from my R800i using Tapatalk 2
Click to expand...
Click to collapse
No you do not need to unlock the bootloader
The extra internal memory helps alot aswell
I need some help with rooting my Sony Ericsson Xperia Neo (MT15i).
I have unlocked my bootloader following the official method. And now I want to root my device but somehow I can't get it done.
I've tried several methods icluding DoomLoRD. But nothing works.
Can somebody explain to me what i need to do?
Is there a way to make a complete backup of my device without having root? before I try rooting?
http://talk.sonymobile.com/thread/41119
This worked for me.
are you on stock GB or Stock ICS or any other customrom ??? which build ?
try to flas with a kernel that will root your devise too....like night-elf or shauve kernell (hope got the spelling right).........
@OP: http://forum.xda-developers.com/showthread.php?t=1678690
samneov said:
are you on stock GB or Stock ICS or any other customrom ??? which build ?
Click to expand...
Click to collapse
Do you see image he uploaded?
Thank you for the replies. I will give it another try this evening.
Sent from my MT15i using xda app-developers app
Try to flash custom kernel then go to cwm.
Sent from my MT11i using Tapatalk 2
Madfysh said:
@OP: http://forum.xda-developers.com/showthread.php?t=1678690
Do you see image he uploaded?
Click to expand...
Click to collapse
no man replied from office with stupid 2g connection ..... images seldom loads...!!!
Thanks for the tips. It worked. Now i have to figure out what to do with a rooted phone :fingers-crossed:
GleDel said:
Thanks for the tips. It worked. Now i have to figure out what to do with a rooted phone :fingers-crossed:
Click to expand...
Click to collapse
i have the same problem plz give me the process that u have followed after unlocking the bootloader ! nd is there anyway to c whether the ur phone is unlocked ?
Plz Plz put a process that u have followed !
stab2 said:
i have the same problem plz give me the process that u have followed after unlocking the bootloader ! nd is there anyway to c whether the ur phone is unlocked ?
Plz Plz put a process that u have followed !
Click to expand...
Click to collapse
I followed the link in the first reply to my question.
GleDel said:
I followed the link in the first reply to my question.
Click to expand...
Click to collapse
ok and is there any problem in doing it WIN 7 64 bit, cuz i have faced serious problems in unlocking bootloader while at win 7 64 bit, but as soon i worked it on my other pc which has xp 32 bit the process gone smooth without any hitch
ill follow the same link of ur 1st question reply, nd ill give u the news then !
Thanks
I also had some problems with unlocking the bootloader (on windows 7 64bit) at first, but after i turned of my antivirus everything worked just fine.
Even I have windows 7 64bit and I don't think there's any issue whatsoever!
I unlocked my bootloader only a few days back!
GleDel said:
I also had some problems with unlocking the bootloader (on windows 7 64bit) at first, but after i turned of my antivirus everything worked just fine.
Click to expand...
Click to collapse
Please dnt mind my questions m very new here, the link to ur 1st question refers to a page of sony where its says:
"How To Root 4.0.3
Just follow the instructions here Root
now this link goes to a thread, that says do it with doom lord: which is a pain !
should i go for the flashtool process instead, but that mentions the FW 4.0.4, where as i have the stock 4.0.3 ?
Plz Help !
Flashtool can't root ics fw's.
And if doomlord's toolkit is hard for you, then don't mess with your phone at all
How can it be hard, you set 2,3options and connect phone to pc, toolkit does all the job..
Madfysh said:
Flashtool can't root ics fw's.
And if doomlord's toolkit is hard for you, then don't mess with your phone at all
How can it be hard, you set 2,3options and connect phone to pc, toolkit does all the job..
Click to expand...
Click to collapse
what are u talking about ! dont u know why this thread was started, this thread started just cuz the doomlord process didnt worked ! look at the start of this thread, and who has started and what is he saying ! if u dont know here it is ! nd i will paste the reply of that thread
"I need some help with rooting my Sony Ericsson Xperia Neo (MT15i).
I have unlocked my bootloader following the official method. And now I want to root my device but somehow I can't get it done.
I've tried several methods icluding DoomLoRD. But nothing works.
Can somebody explain to me what i need to do?
Is there a way to make a complete backup of my device without having root? before I try rooting?"
The reply
http://talk.sonymobile.com/thread/41119
This worked for me.
The same guy i was asking to which process he followed if he has failed in doomlord process then he must have followed Flashtool one !
GleDel said:
Thanks for the tips. It worked. Now i have to figure out what to do with a rooted phone :fingers-crossed:
Click to expand...
Click to collapse
i have visited the same link http://talk.sonymobile.com/thread/41119
it says for version 4.0.3, nd then a thread that says doomlord, which i have already tried so many times wats the difference in this, i even tried this also it has only pushed the super user app which has no apps its just empty there is no significant change ! now plz explain that have u followed the doomlord process again or the flashtool and downloaded the Kernal for NEO V nd did the flashing process by using flashtool !
stab2 said:
what are u talking about ! dont u know why this thread was started, this thread started just cuz the doomlord process didnt worked ! look at the start of this thread, and who has started and what is he saying ! if u dont know here it is ! nd i will paste the reply of that thread
Click to expand...
Click to collapse
For start chill your horses.
I have eyes and I can read, so no need to copy/paste what has been written in this thread.
Second, I know why doomlord's root toolkit failed for OP. doomlords toolkit CAN root .562(also known as 4..0.3) but CAN'T root .431(4.0.4) fw, which is what flashing .562 kernel is needed in order to root.
I know the procedure, I wrote the tutorial(which I linked in post#4), after which guys from talk.sonymobile wrote it on their forum, just FYI.
stab2 said:
"How To Root 4.0.3
Just follow the instructions here Root
now this link goes to a thread, that says do it with doom lord: which is a pain !
should i go for the flashtool process instead, but that mentions the FW 4.0.4, where as i have the stock 4.0.3 ?
Click to expand...
Click to collapse
If you are on 4.0.3, doomlord CAN root your phone, if it can't, you are doing something wrong, in which case, we need to see log of that root process.
Flashtool is only used to flash 4.0.3 kernel, but that's for people on 4.0.4.
stab2 said:
The same guy i was asking to which process he followed if he has failed in doomlord process then he must have followed Flashtool one !
Click to expand...
Click to collapse
He failed with doomlord root toolkit because he had 4.0.4! He needed to flash kernel from 4.0.3, then use toolkit then flash back kernel from 4.0.4
stab2 said:
i have visited the same link http://talk.sonymobile.com/thread/41119
it says for version 4.0.3, nd then a thread that says doomlord, which i have already tried so many times wats the difference in this, i even tried this also it has only pushed the super user app which has no apps its just empty there is no significant change ! now plz explain that have u followed the doomlord process again or the flashtool and downloaded the Kernal for NEO V nd did the flashing process by using flashtool !
Click to expand...
Click to collapse
if doomlord's root toolkit FOR ICS, failed for you, provide log of that process.
Now I tell you another thing, which you would know if you read all post in this thread, specially link I gave above, you have unlocked your bootloader, ffs, you can root without any mess with root toolkits, simply flash/hotboot kernel with CWM and flash superuser zip. And enjoy your phone.
Tutorial on talk.sonymobile doesn't have part for unlocked bootloaders, that's why I linked my tutorial which have both parts.
He failed with doomlord root toolkit because he had 4.0.4! He needed to flash kernel from 4.0.3, then use toolkit then flash back kernel from 4.0.4
if doomlord's root toolkit FOR ICS, failed for you, provide log of that process.
U are rite 4.0.3 is workable in doomslord but only on this doomslord toolkit for xperia "DooMLoRD_v1_Xperia-2011-ICS-ROOT-emu-busybox-su"
it has pushed the SU properly nd installed it ! later i have downloaded CWM 5, so i 1st took Astro File Manager from the Market, for exploring the SD then installed the CWM 5, so when i did the SU asked to get the permission nd then all the options in CWM are ticked well and Su got CWM in its list, so all good and rooted, now please refer me the app that can solve the brightness issue in Neo V :good:
Thanx & Regards
now that i have rooted & all ! how will i go to fw .431 means 4.0.4 ? and if i flash 4.04 will my phone still be rooted ?
If u know a process of how to root in 4.0.4 nd can install su in it plz tell ! nd plz clarify me that CWM is necessary to have it 1st installed on the device or SU ?
Lets suppose ill clear the picture ... if i want to flash 4.0.4 with Kernal .431 my phone is open to root, but as u know the doomlords kit failed ! is there any otherway to push SU as a zip like ur mentioning that flash it with hotboot wats that how the process is going to be ?
Plz help !
Hi XDA users and devs,
i tried two method of rooting xperia p which is flashtool by bin4ry & androxyde and the other method is
Root_with_Restore_by_Bin4ry_v4 CMD stuff and all but m not able to root my device can any one tell me how to do so..
Please help
Post Q & A in Q & A Section next time,not General
To answer your question,try this http://forum.xda-developers.com/showthread.php?t=1900172
neectron said:
Post Q & A in Q & A Section next time,not General
To answer your question,try this http://forum.xda-developers.com/showthread.php?t=1900172
Click to expand...
Click to collapse
XDA become tooo large forum it become difficult to find proper place to add new thread... for new like me in the forum, they dont allow post in the threads like http://forum.xda-developers.com/showthread.php?t=1900172 so i create here.
for your ans will say i tried that one which i already mentioned is there anyone who can help me with the rooting thing for My device
i rooted my device yesterday only..with the same method..n it's the simplest method..which problem u coming at?
bhushan2k said:
i rooted my device yesterday only..with the same method..n it's the simplest method..which problem u coming at?
Click to expand...
Click to collapse
31/023/2012 21:23:52 - INFO - You have 60 seconds to follow the restore advice
31/023/2012 21:23:52 - INFO - Running adbrestoreexploit
31/023/2012 21:23:52 - INFO - Root hack did not work. Cleaning hack files
after this i get ROOTME option under backup & restore option in mobile but after restore and restart nothing happens and no Super user app there
Moved to Q&A
krook6023 said:
Moved to Q&A
Click to expand...
Click to collapse
No Problem still looking for help
Did you install drivers from flaahtool properly?
Even I had come across with some problem at first attempt.. Same frustration.. Next day I started the same process with fresh start.. N phone got rooted..
On which fw u trying to flash?
What is the build number/version of your firmware? Newer versions can't be rooted using that method.
Sent from my Sony Xperia™ TL
Spectre51 said:
What is the build number/version of your firmware? Newer versions can't be rooted using that method.
Sent from my Sony Xperia™ TL
Click to expand...
Click to collapse
6.1.1.B.1.54 is the build number and this is latest which is provided from SONY update option in the mobile...
@bhushan2k yes i have installed the drivers from Flashtool-drivers application..
prawinn said:
6.1.1.B.1.54 is the build number and this is latest which is provided from SONY update option in the mobile...
@bhushan2k yes i have installed the drivers from Flashtool-drivers application..
Click to expand...
Click to collapse
That version can't be rooted using bin4ry's method via .bat file or flashtool. Either unlock the bootloader and flash a rooted kernel or flash back to an older firmware that can be rooted and OTA update.
Sent from my Sony Xperia™ TL
might look into this one....
http://forum.xda-developers.com/showthread.php?p=26531938
donwgrade to previous version.. and root it .. after that flash it agian.. thats the only solution..
Assuming that you have installed following:
- Android ADB
- latest Flashtools & (driver) - antivirus disabled
- mobile is readily getting into flashmode and fashboot mode.
- usually i dont go into these hasles i install and flash CWM and then install custom ROM which are far better than stock rom.
darktanget said:
might look into this one....
http://forum.xda-developers.com/showthread.php?p=26531938
donwgrade to previous version.. and root it .. after that flash it agian.. thats the only solution..
Assuming that you have installed following:
- Android ADB
- latest Flashtools & (driver) - antivirus disabled
- mobile is readily getting into flashmode and fashboot mode.
- usually i dont go into these hasles i install and flash CWM and then install custom ROM which are far better than stock rom.
Click to expand...
Click to collapse
Thank you guys... just unlock the bootloader done... downloading the Old firmware. too slow downloading here.. waiting to finished it
prawinn said:
Thank you guys... just unlock the bootloader done... downloading the Old firmware. too slow downloading here.. waiting to finished it
Click to expand...
Click to collapse
prerooted firmware downloaded and stucked in boot loop... again falshed old firmware and rooted..
guy this is more important dont flash prerooted OS just flash with old baseband you will get 100% root