Hi.
My Hero is running on CM7.1.I've just recently flashed it.While i was doing all the wiping stuff,i accidently wiped my battery stats.I thought it was okay so i just went on with it.But then i got bored so i downloaded some new ROMS to try out,and when i wanted to transfer the ROMS into my hero,it just won't connect,it just charges.
Does this have anything to do with the wiping of my phones battery stats?because everything worked fine before i wiped it.If so,what do i do?
Thanks.
You should be fine. Wiping battery stats is no problem and won't cause this issue, in fact, It's worth wiping battery stats when flashing a new Rom and fully charged anyway. For your problem, what Rom are you on? And have you simply tried selecting the option from notifications to transfer files?
I'm still on CM7.1.The icon to transfer files is not showing in the notification.I've tried switching to my previous backups and still nothing.I just found out that it also won't go into debugging mode.the icons don't appear in my notification.
Check ur cable,its not a rom fault...
Sent from my Hero using xda premium
I'm sure it isn't the Rom's fault.But the cable was working perfectly fine.
Yea most of d times it does,i haven't used HTC charger since 5months cos it stopped working, although it charges well,
Sent from my Hero using xda premium
Okay.I'll give it a shot.
Check fastboot to see if its roms fault
Hi,
In my case the cable was functional, rebooting into bootloader i was able to run fastboot but adb just wouldn't recognise my phone. The only way i could solve it was by flashing the original htc ruu from http://forum.xda-developers.com/showthread.php?t=559622
Turns out a faulty custom rom screwed my phones drivers.
Regards,
Kiran
Related
Since 2 days i have this problem.
When i connect my phone to the adapter it takes several seconds before it actually charging. But when it's full and i dissconnect it from the adapter it just keeps saying that my battery is full and i have to remove the charger.
When i connect my phone to the computer its keeps saying that he doesn't recognize the usb connecter.
What i have tried so far.
- Trying different chargers/cables
- Trying to update software but this can't be done without cable @ me
- Trying to clean up de usb port in the phone
- Battery reset
I have searched whole google and this forum but couldn't find anything related to this. so sorry if it's a repost
First up, do a factory reset. Back your stuff up before, obviously.
What rom/kernel are you running ?
MistahBungle said:
First up, do a factory reset. Back your stuff up before, obviously.
What rom/kernel are you running ?
Click to expand...
Click to collapse
When i did the factory reset it went in a bootloop for some reason.
I am using 2.6.35.7 codeworkx clockworck. I have rooted the phone and put clockworck on it nothing more... and it always worked fine.
I noticed something new. When i put off my phone you see the battery and next to it you see a yellow triangle with a exclamation mark in it. After that it changes into to a temperature meter showing it's to hot but i allready checked it and it's only 37 degrees.
First of all try the most obvious method such as turning on USB debugging. If that doesnt work go to the method below:
There is no need to do a factory reset. Just reflash your rom or flash a new one but make sure you have done a backup of your files. It worked for me
Sent from my Legend using xda premium
Sounds like the battery and/or the usb/charging circuitry/components might be on the fritz.
Try Steve's suggestion first (re-flash your rom or another rom), if that doesn't work, try another battery. Or even another charger. Tho you said you're seeing problems when you hook it up to a PC via USB.
If you get the same result after re-flashing same/different rom & with a different battery it would probably be a hardware fault.
I'd flash stock first & try that before restoring any backup, that would give you an indication of whether its a hardware issue (particularly with a different battery).
Hey Guys..
I recently received a refurbished Atrix 4g as a warranty exchange and everything was working fine for a while. Then I decided to unlock the BL and try a few of the ROMs out there. No issues with the flashing part, but now I get random shut downs maybe 10-15 times a day. I have tried multiple thing without success so far so if you have any idea what could help please let me know how to do it.. How can I adjust the CPU/voltage settings on the phone (might work..?)
The phone does not shut down/restart while I am charging or it is in use. Seems to be only in sleep/idle mode
Types of shut downs:
1. Phone shuts off and I have to pull the battery so that it will turn on (green light blinks every few seconds while it is off even without notifications).
2. Phone shuts off and I can get it to turn on by pressing the power button (same light situation as above).
3. Phone shuts off but immediately turns back on and boots up fine.
4. Phone shuts off but immediately turns back on but rather than booting up shows the red text error "Unreachable bootloader error 0x00000004" (green light lit dimly). Will restart fine once I pull battery and reboot.
What I have tried so far:
1. Flashing different ROMs with different kernels.
2. Replaced battery.
3. Read a million posts on issues somewhat similar.
Thanks for any help!
I have the same thing it's because you unlocked the boot loader I no this because if I relock it it never sod
I would use fast boot to wipe data wipe cache and dalvic and then properly flash a good working rom like cm7 or nottach trix something like that also you could wipe every thing and flash current sbf /root into it then flash rom
if the second option still messes up its a hardware issue
rickwyatt said:
I have the same thing it's because you unlocked the boot loader I no this because if I relock it it never sod
Click to expand...
Click to collapse
Thanks for replying.. Were you able to fix this issue? If so, do you have instructions on how?
Thanks
ltdanno360 said:
I would use fast boot to wipe data wipe cache and dalvic and then properly flash a good working rom like cm7 or nottach trix something like that also you could wipe every thing and flash current sbf /root into it then flash rom
if the second option still messes up its a hardware issue
Click to expand...
Click to collapse
Hey, thanks for the suggestions.
I have tried or am currently using those ROMs .. Is there a safe way to flash the current sbf if i started off at 2.3.6 4.5.141?
My atrix did the same thing when I first flashed the neutrino rom but it was only because I wasn't using rom racers recovery. Try flashing that and then wipe everything and flash neutrino again. I'm not sure if that's your problem but flashing the latest recovery fixed mine.
Sent from my MB860 using XDA
Atrixn00b said:
My atrix did the same thing when I first flashed the neutrino rom but it was only because I wasn't using rom racers recovery. Try flashing that and then wipe everything and flash neutrino again. I'm not sure if that's your problem but flashing the latest recovery fixed mine.
Sent from my MB860 using XDA
Click to expand...
Click to collapse
tried with no success... :/
rickwyatt said:
I have the same thing it's because you unlocked the boot loader I no this because if I relock it it never sod
Click to expand...
Click to collapse
you relocked the bootloader? really?
please do tell us more lol
What is the cause if you have random reboots with a fully stock Atrix? My wife has an Atrix that I'm not allowed to touch (meaning root it or unlock bootloader, etc). She has had it a few months and this past week while she has been using it, it just reboots. I have never experienced this on any of my phones. Any thoughts? I would be grateful for the insight so i don't have to do a warranty exchange.
Sent from my SAMSUNG-SGH-I997 using xda premium
Iglf that didn't work you should return it. Mine would just reboot and not show some error. Maybe you got aa water damaged phone? Its possible for water to just hit a price of metal to cause a phone to go bonkers
Sent from my MB860 using XDA
sanriver12 said:
you relocked the bootloader? really?
please do tell us more lol
Click to expand...
Click to collapse
I'm guessing he means the fix that makes the "unlocked" message stop appearing, lots of people were doing it to return for warranty issues when the Atrix was newer. It doesn't actually relock it, it just stops showing unlocked at boot.
I have a completely stock atrix and do to touchscreen issues(wouldnt respond halfway throuh any function) i did a factory reset via settings menu. Cleared up my touchscreen issues so far but now my phone reboots 5-10 times an hour unless charging or during call...
goosegodz said:
I have a completely stock atrix and do to touchscreen issues(wouldnt respond halfway throuh any function) i did a factory reset via settings menu. Cleared up my touchscreen issues so far but now my phone reboots 5-10 times an hour unless charging or during call...
Click to expand...
Click to collapse
Both a co-worker and myself have been experiencing random reboots for the last week. Both of ours are 2.3.6/4.5.141. Only difference between ours is mine is rooted, his not.
I wiped my Dalvik cache last night, and so far only rebooted once in the last 24 hours (Before it was almost 5 times a day). I did same wipe on his phone, and will see if that fixes problem.
It's just weird that everyone with an Atrix is experiencing this reboots.
I have the sme problem of my phone.. but random reboots appears when internal temp reaches over 38 degrees. I want to take it back to warranty but WTF am I gonna do with a new atrix that I can't touch??
So.. somewhere I read that an app called load monitor can help with this problem.. so I did.. Downloaded from market.. my cell phone has been working pretty good so far.. I created a profile on SetCPU and undervolted it 25 Mhz..
I haven't flash a sfb file just because I dont want to hard brick my phone..
If anyone wants to try what I said please let me know if that worked for you guys..
Regards..!!
I've had this twice in the past twelve hours. It happened once when I had it plugged into my computer in mass storage mode and another time when it was just sitting idle. I've always had load monitor installed on my phone. It tells me something is using a ton of resources, but I can't tell what. Task manager doesn't yield any answers either.
I was just going to send mine in, but I forgot about the new bootloader lock. F***.
I'm running the latest Nottachtrix (flashed via romracers) and the Faux123 1.45ghz kernel.
I know it's not water damage, as suggested earlier. It just started last night and my phone wasn't near water.
This issue seems to be all over the board. Some have some don't. Its very frustrating. I cant even u a case on my atrix. Anytime I use the phone more than 30 mins at a time I get either get the blue sleep or a reboot. And have to pull the battery. Have a spare unrooted atrix I'm gonna switch to til this issue can be resolved.
Sent from my MB860 using xda premium
try using a different kernel with your roms
Reboots
I used to have the same problem, constant reboots all day long. I seem to have cured it installing 1.4.2 telstra, (im on a Bell), and then unlocked and rooted, then flashed 4.5.133 and hit it with faux's 1.45 ghz kernel, works like a charm now. This info might help..
Is is this issue with the WiFi?
I have heard that there is a problem with the Broadcom WiFi module that is inside the phone, when it dies it causes the phone to randomly reboot.
There is an ICS ROM that does not include support for this chip so it may fix the problem (provided you don't ever need WiFi or Bluetooth)
http://forum.xda-developers.com/showthread.php?t=1656760
HELPPP
Please my atrix 4g just keeps turning off like every 30-15 minutes and sometimes because overheating i think and i have no warranty at all i bought of ebay at first it was okay but the i unlocked bootloader and rooted i was 2.3.6 4.5.141 and im no nottchatrix 1.31 first i was on neutrino 2.8 and allways reseted.. and i think the fingerprint sensor wont work now my phone worked like a charm when i bought it but now not help pleaseeeee
So, sort of long story, i'll cut it short
-Got an old X10, had stock 2.3.3
-Rooted it
-Did not unlock bootloader, got kinda scared.
-Tried to install FeraLab custom ROM, it failed probably because of sdcard permissions; i accidentally wipe /system /data /cache
-stuck at first Sony Ericsson screen
-Somehow managed to flash a 2.1 stock rom with flashtool, after an hour of different combinations of enterring flash mode and pulling the battery
-Tried to install FeraLab again, this time it went through
-After install, rebooted, phone shut down during boot up process
-Will not turn on at all. Even when plugged into a PC, wall, not plugged in, pulling battery, etc.
I think what happened is that FeraLab needed a newer baseband than the 2.1 stock rom had. Does anyone have any suggestions on how to get this sucker to even turn on? Not a single LED is on when plugged in, giving me the impression that it's not charging.
If the battery has drained out, it might take some time before it kicks in and indicates that it is charging.
If the ROM has failed somehow, it might not show that it is charging at all, but might be charging.
Either way: Let it charge "blindly" for a while, and see what happens.
Once it does boot up to some level or shows life-signs, let it charge fully before you'l attempt a ROM flash.
The flash/recovery mode needs a full battery, and reason is that the external power isn't used even when connected while in flash/recovery mode.
If you happen to be in bad luck, and the ROM failed as a result of a drained battery, you might have to charge the battery externally. Use an external battery charger made for 3.6 volts Lithium Polymer batteries, and make sure to align the + and - terminals properly.
I can recommend the multicharger from Powerbase, called C-734U:
http://www.powerbasehk.com/product.php?id=148
Using it myself to charge the X10 battery, as well as other batteries from other devices I have.
EDIT:
(For some reason, powerbase has taken back that it'll charge Lipo batteries, but when I bought mine, it was described as a li-ion, li-poly and Ni-MH charger, and it't ability to charge li-poly batteries was the very one reason to why I bought it.
I suspect PowerBase does not want to take responsibility if anything happens to the li-poly-batteries, as they are known to be more dangerous than other types.)
I've left it on the wall charger all night, no response or anything. Luckily, I bought a new battery a few days ago, so when that comes in, hopefully it will be charged enough for this thing to boot.
Do me a favour are u able to take screebshot of settings, about phone menu and post it here? Need to see ur baseband and kernel
Sent from my X10i using XDA
laneyofdeath said:
Do me a favour are u able to take screebshot of settings, about phone menu and post it here? Need to see ur baseband and kernel
Sent from my X10i using XDA
Click to expand...
Click to collapse
Dude his phone wont start up. How come he'll be able to take a screenshot
Sent from my LT26i using xda premium
king-iyokan said:
Dude his phone wont start up. How come he'll be able to take a screenshot
Sent from my LT26i using xda premium
Click to expand...
Click to collapse
Yeah, i'm not sure what he expected. But, good news! Now for some reason my phone started blinking red whenever I tried to turn it on! I guess the battery completely ran out or something. It also blinks every now and then when plugged in, so I guess it's charging. The previous owner of this phone said that it had some battery problems, so that's why I ordered that new battery. I'll let it charge for awhile and let you guys know what happens.
Okay, after getting my new battery, the phone will still not turn on. I think i've figured out two behaviors:
1. If the battery is nearly completely out of charge, it will flash a red light
2. If the battery has charge, it will not do anything at all.
Anyone know how to fix this?
While trying to turn on the phone, after long-press power button, do you get a flash from status led & short vibration?
From my XPERIA X10S v8.2 on kCernel @ 1.19ghz
ToledoJab said:
While trying to turn on the phone, after long-press power button, do you get a flash from status led & short vibration?
From my XPERIA X10S v8.2 on kCernel @ 1.19ghz
Click to expand...
Click to collapse
No vibration, the red LED flashes three times, and that is , as I said before, what happens when the battery seems to not have any charge. If I have a charged battery it does absolutely nothing.
Have you removed sim & sd card and tried. I know it sounds dumb but when I flashed a bad kernel I had to try to connect flash mode like 10 times. Finally I left the phone unplugged from pc, started flashtool and started flashing. I only put battery in phone just before holding back key. I never connected USB until tool said to dis-connect phone and connect in flashmode.
i wish you luck, I know how I felt when it went wrong
From my XPERIA X10S v8.2 on kCernel @ 1.19ghz
FireFreek said:
So, sort of long story, i'll cut it short
-Got an old X10, had stock 2.3.3
-Rooted it
-Did not unlock bootloader, got kinda scared.
-Tried to install FeraLab custom ROM, it failed probably because of sdcard permissions; i accidentally wipe /system /data /cache
-stuck at first Sony Ericsson screen
-Somehow managed to flash a 2.1 stock rom with flashtool, after an hour of different combinations of enterring flash mode and pulling the battery
-Tried to install FeraLab again, this time it went through
-After install, rebooted, phone shut down during boot up process
-Will not turn on at all. Even when plugged into a PC, wall, not plugged in, pulling battery, etc.
I think what happened is that FeraLab needed a newer baseband than the 2.1 stock rom had. Does anyone have any suggestions on how to get this sucker to even turn on? Not a single LED is on when plugged in, giving me the impression that it's not charging.
Click to expand...
Click to collapse
Try to flash any latest kernel via flashtool . Go for doomkernel . I think its software issue . Try this first .
Almost same here please help..
Last night battery ran out of charge & phone switched off.. then i plugged the charger it doesn't charge.. after some time i tried turning on.. Vibrates with the green LED but nothing happens then..
Note: This is not the 1st time i'm letting my phone drain, but facing this problem for the 1st time..
Rom : Spikelabs GB Gaming rom
Kernel : Ferakernel v23 beta6
I tried another battery, charger, data cable.. Tried flashing stock & spikelabs kernel., but of no use..
Any help is greatly appreciated..
Thanks in advance.. :good:
Something like that happened to me not long ago!
I was trying to flash some ROMs and I messed up then my phone wouldn't turn on!
But Miracously, I could flash a Stock 2.3.3 which fixed the problem!
At first, I used Sony PC Companion, which helped a lot- and after I screwed it for the second time, I used FlashTool-
I don't know if this was helpful, but I hope your x10 will be fixed soon!
yeah try the PC Companion first, it helped me too a couple of weeks ago
No luck...
Hi friends..
Tried to repair using PC companion, but was able to connect only in flash mode, unable to proceed software update..
I previously tried flashing stock GB using flashtool thrice. Still couldn't switch on the phone.. What else may i try..
Thanks friends..
ashok weird said:
Hi friends..
Tried to repair using PC companion, but was able to connect only in flash mode, unable to proceed software update..
I previously tried flashing stock GB using flashtool thrice. Still couldn't switch on the phone.. What else may i try..
Thanks friends..
Click to expand...
Click to collapse
try flashing kernel other than spikelabs (e.g. feravolt,doom,achotjan,zkernel..etc.)
sanababitz said:
try flashing kernel other than spikelabs (e.g. feravolt,doom,achotjan,zkernel..etc.)
Click to expand...
Click to collapse
Tried Ferakernel, Stock GB kernel, etc bro.. No luck..
Flashed Stock GB firmware more than 3 times still no luck :crying:
SEUS not working _ couldn't connect to network..
SUS does not have x10 enlisted
Went to 3 service shops at - Ritchie street, Chennai. They simply said harware issue (Short in board) and gave back the phone.
Now given at a better service centre. Will get back on monday it seems. Will update the status friends..
Thanks..
Here also they said the same reason friends.. Short in board..
Is there any way i could recover the phone???
Hi
i have two batteries, one in the phone and one i keep on the charger. Before i pulled out the battery without turning the phone off to replace it. now the phone wont go pass the samsung boot screen. phone was working perfectly before. currently running sotmax v10. tried reflashing the rom but still nothing.
is there anything i can do?
Try some other ROM... still if it doesn't work, try flashing official firmware with ODIN... hope it works.
Sent from my GT-I9300 using xda app-developers app
nathaniel.tp said:
Hi
i have two batteries, one in the phone and one i keep on the charger. Before i pulled out the battery without turning the phone off to replace it. now the phone wont go pass the samsung boot screen. phone was working perfectly before. currently running sotmax v10. tried reflashing the rom but still nothing.
is there anything i can do?
Click to expand...
Click to collapse
Full wipe and re-install from recovery?
Does it boot into Download Mode? If yes, try to Odin back to stock ROM?
Hi. My phone is behaving kinda weird since yesterday. Suddenly it turned off, and when I was trying to power it on it was turning off after Samsung Galaxy S2 boot logo, or after carrier splash (I was running full stock without any root or modifications).
When I plugged in the charger it was randomly showing 2 battery status (sometimes empty, sometimes correct one). Stock recovery mode and download was working fine, it could run on it forever, without reseting.
I decided to install custom recoveries. First time I tried with Philz's one. Same results, battery indicator shows correct value. CWM - working fine. TWRP - working fine, but battery status sometimes points 1% (but it won't turn off), sometimes correct one.
I've also tried flashing new brand ROM through Odin 1.85 and Philz recovery (here I used SlimKat). In both cases the booting errors was the same.
Does anybody have any solution how I can fix it?
Maczuga said:
Hi. My phone is behaving kinda weird since yesterday. Suddenly it turned off, and when I was trying to power it on it was turning off after Samsung Galaxy S2 boot logo, or after carrier splash (I was running full stock without any root or modifications).
When I plugged in the charger it was randomly showing 2 battery status (sometimes empty, sometimes correct one). Stock recovery mode and download was working fine, it could run on it forever, without reseting.
I decided to install custom recoveries. First time I tried with Philz's one. Same results, battery indicator shows correct value. CWM - working fine. TWRP - working fine, but battery status sometimes points 1% (but it won't turn off), sometimes correct one.
I've also tried flashing new brand ROM through Odin 1.85 and Philz recovery (here I used SlimKat). In both cases the booting errors was the same.
Does anybody have any solution how I can fix it?
Click to expand...
Click to collapse
Edit: Sorry, gave a wrong answer
Now you have a custom recovery, you might want to try wiping dalvik, cache and data....then try to boot as normal......
If that doesn't work, then you might want to try formatting the memory partitions under "mounts and storage", re flashing the ROM and then try to boot normally.......
This might be my S2 or it might be my W, but it's definitely CM...
I think its battery problem..if some one has same battery put it in your mobile and then try...if it works fine then buy a new battery..
Sent from my GT-I9100 using xda app-developers app
m.anwar said:
I think its battery problem..if some one has same battery put it in your mobile and then try...if it works fine then buy a new battery..
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
Yes, I checked it 2 days ago. It was battery fault (phone was overheating because of games, and somehow it has an impact on battery).