Flashed KS9 With ODIN and everything went fine said " PASS " but phone keeps boot-looping :/
Any ideas ?
Thanks
its called bootloop and not bricked.....
go to recovery wipe data + cache......you are ready to go
ryanraven said:
Flashed KS9 With ODIN and everything went fine said " PASS " but phone keeps boot-looping :/
Any ideas ?
Thanks
Click to expand...
Click to collapse
was your previous rom cm7.2??
then you have to flash firmwares like kpb,kpo,kph.. because there are multi package you can't flash one package if you are switching from cm7.2 or cm7.1 to stock firmware ..basically you need multi package wich contains files like apboot,
code,csc,modem ..
its not bricked.. bricked means when phone can't wake up
solutions - either go to recovery and do full wipe (factory reset) + wipe cache.
or
flash any multi package rom.
Thank you both Wiping Data/factory reset and wiping cache worked
life savers !
Ayushbhatiapro said:
was your previous rom cm7.2??
then you have to flash firmwares like kpb,kpo,kph.. because there are multi package you can't flash one package if you are switching from cm7.2 or cm7.1 to stock firmware ..basically you need multi package wich contains files like apboot,
code,csc,modem ..
its not bricked.. bricked means when phone can't wake up
solutions - either go to recovery and do full wipe (factory reset) + wipe cache.
or
flash any multi package rom.
Click to expand...
Click to collapse
Unrelated to this .... but u say wen switching from cm 7.2 to stock we cant use one package ??
but i have been using one package only ... wen flashing from 7.2 , 7.1 ... etc...
[ DDKQ6 ]
prateek_gemini said:
Unrelated to this .... but u say wen switching from cm 7.2 to stock we cant use one package ??
but i have been using one package only ... wen flashing from 7.2 , 7.1 ... etc...
[ DDKQ6 ]
Click to expand...
Click to collapse
No, u can't use one package ,because cm7 changes the extension to ext4
and stock firmware has extension of rfs.
so if you flash one package you will get boot loop..
but if you flash one package ->
Then go to recovery and do factory reset and wipe cache..
that will change extension to rfs again...so you will not get boot loop.
As simple as that
Ayushbhatiapro said:
No, u can't use one package ,because cm7 changes the extension to ext4
and stock firmware has extension of rfs.
so if you flash one package you will get boot loop..
but if you flash one package ->
Then go to recovery and do factory reset and wipe cache..
that will change extension to rfs again...so you will not get boot loop.
As simple as that
Click to expand...
Click to collapse
have you tried going from cm7 to stock ?? NO
i tried several roms and always did one package..and all worked.
most of stock rom now converts it first to rfs and then only intsall
ext4 is not extension FYI
Ayushbhatiapro said:
No, u can't use one package ,because cm7 changes the extension to ext4
and stock firmware has extension of rfs.
so if you flash one package you will get boot loop..
but if you flash one package ->
Then go to recovery and do factory reset and wipe cache..
that will change extension to rfs again...so you will not get boot loop.
As simple as that
Click to expand...
Click to collapse
ohh ok ok ..... ya i always used to get bootloop but wiped cache n it worked .... thought that was normal ..!!! thanks gud info !!!!
madman_amit said:
have you tried going from cm7 to stock ?? NO
i tried several roms and always did one package..and all worked.
most of stock rom now converts it first to rfs and then only intsall
ext4 is not extension FYI
Click to expand...
Click to collapse
I have went to stock rom many times I used to get boot loop if flash one package ..and if multi packege no boot loops no need for factory rest and wiping cache
Then I searched why this happens ...then I got this information ...
I always use multi package
well all the latest roms on sammobiles and sampro are one package so you need to know this
madman_amit said:
its called bootloop and not bricked.....
go to recovery wipe data + cache......you are ready to go
Click to expand...
Click to collapse
Just wanted to say thanks. I was worried for a bit when my phone boot looped
Related
Hi everyone,
I've installed ICS domination theme on my SGS2 with litening rom 6.1 installed on it.
After the installation, i've got a boot loop with a strange pop up which is
" Select an action
----------------------------------------------
Select an application for the USB device."
So I've wiped user data from the CWM recovery and I tried to install back my insecure rom (litening rom) with odin and also the original one.
The phone reboot well but i still get the pop up and i can't do anything ...
Is there a way to format and start from scratch or a another solution to remove this pop up ?
PS: i don't mind losing all my data.
PS2: sorry for the picture's bad quality (i took from my webcam ...)
ippo.san said:
Hi everyone,
I've installed ICS domination theme on my SGS2 with litening rom 6.1 installed on it.
After the installation, i've got a boot loop with a strange pop up which is
" Select an action
----------------------------------------------
Select an application for the USB device."
So I've wiped user data from the CWM recovery and I tried to install back my insecure rom (litening rom) with odin and also the original one.
The phone reboot well but i still get the pop up and i can't do anything ...
Is there a way to format and start from scratch or a another solution to remove this pop up ?
PS: i don't mind losing all my data.
PS2: sorry for the picture's bad quality (i took from my webcam ...)
Click to expand...
Click to collapse
U said u wiped the user data from CWM but don't wanna lose data??!
Go to CWM>
Mount and storage>format system
And also format cache
Then reflash rom
CHEERS ;-)
Sent from my Galaxy S2 - I9100 with SlimRom!
Hannibal226 said:
U said u wiped the user data from CWM but don't wanna lose data??!
Go to CWM>
Mount and storage>format system
And also format cache
Then reflash rom
CHEERS ;-)
Sent from my Galaxy S2 - I9100 with SlimRom!
Click to expand...
Click to collapse
Thanks for the quick reply !
I said i don't mind (or care) about losing data.
I don't have the mount storage and any format system (otherwise i would have already tried it ) on CWM ... I only get :
-reboot system
-apply update from sdcard
-wipe data/factory reset
-wipe cache partition
My android system recovery is 3e version
ippo.san said:
Thanks for the quick reply !
I said i don't mind (or care) about losing data.
I don't have the mount storage and any format system (otherwise i would have already tried it ) on CWM ... I only get :
-reboot system
-apply update from sdcard
-wipe data/factory reset
-wipe cache partition
My android system recovery is 3e version
Click to expand...
Click to collapse
YOU have no CWM recovery .
Did you follow the do not posts etc boot loop instructions post 1 Q&A
Flash a root and CWM kernel .
Root + CWM .
http://forum.xda-developers.com/showthread.php?t=1103399
jje
Thanks for the link.
I have succeeded into formating my system then reflash the original rom but now it is stuck at the first black screen with the "samsung galaxy s2" written on it.
So i format system again, format data, cache and reflash the rom ... same thing happened
ippo.san said:
Thanks for the link.
I have succeeded into formating my system then reflash the original rom but now it is stuck at the first black screen with the "samsung galaxy s2" written on it.
So i format system again, format data, cache and reflash the rom ... same thing happened
Click to expand...
Click to collapse
If you're experiencing a bootloop
http://forum.xda-developers.com/showthread.php?t=1108499
Other wise check that you've flashed everything properly
it's not a boot loop as my phone doesn't even boot ...
ippo.san said:
it's not a boot loop as my phone doesn't even boot ...
Click to expand...
Click to collapse
yeah sorry about that realised later.
Try wiping from CWM or flashing official stock firmware all over again
I have fixed my problem.
It was soft bricked so I have follow one thread: http://forum.xda-developers.com/showthread.php?t=1457458
Anyway, thanks everyone for answering me !
Rite,
İ am new to ROMs and everything. İ downloaded FOXHOUND Sniper Wolf ROM. İ followed the instructions which are:
1. Boot into recovery mode
2. Format System / Factory Data Wipe
3. Wipe cache and also wipe dalvik cache
4. Install the zip file and you will get the CWM install completed message.
5. Select Reboot Now and let the phone boot up to an Android setup screen.
6. Setup the phone as requested
7. Reboot the phone into recovery mode again and wipe cache and dalvik cache again
8. Reboot phone and everything should be working...
On stage 5. my phone loads up to the android setup screen but a message comes up saying:
'Select and application for the USB device' and below that it says 'no application can perform this action' and another message below that ' %1$s is not responding. would you like to close it'.
İf İ try to do anything the phone just reboots and the same process keeps repeating. İ have searched but cannot find anything relating to this problem. Please help me....
reflash the ROM,
not helped, download the rom again and flash
still not helped select someother ROM
ZACQ8 said:
reflash the ROM,
not helped, download the rom again and flash
still not helped select someother ROM
Click to expand...
Click to collapse
Thank you for your reply but can you be a little bit more specific as İ am a newbie, İ really appreciate the help...
So i re installed the ROM but still have the same problem...
The phone does not boot for me to download another ROM.
Any other solutions?
save your important data from sd card(internal card) , copy to computer , make a hard reset(erase all internal data) flash a new rom via odin , root with cf-root via odin(i recomand xila 2 witch cf-root that u find here on xda,and xila2 room too, and then download the rom you wanted put it on your sd card,go to recovery wipe cache dalvik,wipe data factory reset,install the rom u want. after u may pasye the data you saved before on computer. good luck. for example u can save all your data witch titanium backup.
Download again the rom
Make a full wipe, factory reset,
Reinstall the rom
If that doesn't work
Install via Odin a CF root rom, and use other rom, like cm9
Sent from SGSII//CM9 >>xBlackDroid<<
enigmatyq said:
save your important data from sd card(internal card) , copy to computer , make a hard reset(erase all internal data) flash a new rom via odin , root with cf-root via odin(i recomand xila 2 witch cf-root that u find here on xda,and xila2 room too, and then download the rom you wanted put it on your sd card,go to recovery wipe cache dalvik,wipe data factory reset,install the rom u want. after u may pasye the data you saved before on computer. good luck. for example u can save all your data witch titanium backup.
Click to expand...
Click to collapse
if you dont want to make that steps you may do this : go to recovery, mounts&storage, format cache , format data , format system , them reflash your rom from recovery , after this wipe cache wipe dalvik wipe data , and the fix permissions.
Rite, so İ can recover my phone by loading another ROM via ODİN?
Sorry to be a pain, but İ am a dummy when it comes to this stuff...
muzzyx said:
Rite, so İ can recover my phone by loading another ROM via ODİN?
Sorry to be a pain, but İ am a dummy when it comes to this stuff...
Click to expand...
Click to collapse
yes you can.
don.t panic,that.s the reason for xda exist,to help pples.
muzzyx said:
Rite, so İ can recover my phone by loading another ROM via ODİN?
Sorry to be a pain, but İ am a dummy when it comes to this stuff...
Click to expand...
Click to collapse
Yeah man, download some from general section
Sent from SGSII//CM9 >>xBlackDroid<<
enigmatyq said:
yes you can.
don.t panic,that.s the reason for xda exist,to help pples.
Click to expand...
Click to collapse
Thank you
ok, so how can İ download the ROM again and install all over if my phone is not booting?
muzzyx said:
Thank you
ok, so how can İ download the ROM again and install all over if my phone is not booting?
Click to expand...
Click to collapse
well do what i say in the first post,install that rom via odin,root,and after download the rom u want in your phone and flash it.
flash this http://hotfile.com/dl/146503450/02dbdd0/I9100XILA2_I9100OXIKK1_ITV.zip.html then flash this http://download.chainfire.eu/137/CF-Root/SGS2/CF-Root-SGS2_XI_ITV_LA2-v5.0-CWM5.zip and then install the rom u want...remember to do a hard reset..and all i posted in first post.
just found this thread http://forum.xda-developers.com/showthread.php?t=1449771
İs it ok if İ follow the instructions?
Can someone help me flash this ROM? " http://forum.xda-developers.com/showthread.php?t=1844343 "
I've rooted then clockworkmod recovery and wipe cache and user data and then install zip from sd card
but when i reboot it always never boot past the screen with a yellow triangle can someone give me a complete guide from rooting cwm to flashing this rom?
andyzeng1993 said:
Can someone help me flash this ROM? " http://forum.xda-developers.com/showthread.php?t=1844343 "
I've rooted then clockworkmod recovery and wipe cache and user data and then install zip from sd card
but when i reboot it always never boot past the screen with a yellow triangle can someone give me a complete guide from rooting cwm to flashing this rom?
Click to expand...
Click to collapse
Flash kernel with Odin.[http://forum.xda-developers.com/showthread.php?t=1617219]
After your phone is booted put the phone into recovery modes., In CWM do you wipe data / wipe cache / wipe Dalvik cache / format system in mounts and storage.Then install Rom from sdcard.
andyzeng1993 said:
Can someone help me flash this ROM? " http://forum.xda-developers.com/showthread.php?t=1844343 "
I've rooted then clockworkmod recovery and wipe cache and user data and then install zip from sd card
but when i reboot it always never boot past the screen with a yellow triangle can someone give me a complete guide from rooting cwm to flashing this rom?
Click to expand...
Click to collapse
have you checked md5sum: e9c809385764bc6083616ce8cd5b0f36?
once downloaded, it should have the same md5..
wow.. size: 150.21mb? that's pretty lite
Tequila6808 said:
Flash kernel with Odin.[http://forum.xda-developers.com/showthread.php?t=1617219]
After your phone is booted put the phone into recovery modes., In CWM do you wipe data / wipe cache / wipe Dalvik cache / format system in mounts and storage.Then install Rom from sdcard.
Click to expand...
Click to collapse
is this a different ROM? i really dont know what ROM to install and this sounds like it would be a lot easier
andyzeng1993 said:
is this a different ROM? i really dont know what ROM to install and this sounds like it would be a lot easier
Click to expand...
Click to collapse
thats not a rom ma8, but a kernel to root ur phone first, so that u can install any custom rom of ur choice
andyzeng1993 said:
is this a different ROM? i really dont know what ROM to install and this sounds like it would be a lot easier
Click to expand...
Click to collapse
what he is trying to say is that you should flash the kernel AFTER you flash your ROM
the ROM you chose is [CM10][Jellybro] i9100 Nightly Kangs, yes?
anyway..
here is what you should do
1. flash your rom
2. flash gapps for cm10
3. flash a kernel [an example of which is Dorimanx Kernel]
if you are still confused on some terms, please refer here
I hope this helps
EDIT:
you should root your phone first
You know, after flashing a new rom booting may take some more time, at least a few minutes. Have you been waiting enough time?
First, check md5sum of ROM [what Saywhatt wrote a few posts back]
a. If you are no longer in recovery modes then you can get a kernel [tar file] Flashing with Odin.
If your phone then starts normally, then flash the ROM you want through CWM.
*** wipe data / wipe cache / wipe Dalvik cache / format system in mounts and storage / flash ROM from sdcard***
b. If you can get into recovery mode, not flash with Odin, but do these same steps;
**** wipe data / wipe cache / wipe Dalvik cache / format system in mounts and storage / flash ROM from sdcard***
PS. If it fails in step a first flash stock ROM with Odin
sorry for my bad english
saywhatt said:
what he is trying to say is that you should flash the kernel AFTER you flash your ROM
the ROM you chose is [CM10][Jellybro] i9100 Nightly Kangs, yes?
anyway..
here is what you should do
1. flash your rom
2. flash gapps for cm10
3. flash a kernel [an example of which is Dorimanx Kernel]
if you are still confused on some terms, please refer here
I hope this helps
EDIT:
you should root your phone first
Click to expand...
Click to collapse
I installed stock ICS, rooted and has recovery mod, wiped cache data battery dalvik, installed the ROM in recovery mode, installed Gapps, and installed kernel, and now it boots to dorimanx's kernel screen and it stops.. and turns black... same thing
andyzeng1993 said:
I installed stock ICS, rooted and has recovery mod, wiped cache data battery dalvik, installed the ROM in recovery mode, installed Gapps, and installed kernel, and now it boots to dorimanx's kernel screen and it stops.. and turns black... same thing
Click to expand...
Click to collapse
which kernel have you flashed from Dorimanx?
You need to flash the JB kernel of Dorimanx (v7.x)
Tequila6808 said:
which kernel have you flashed from Dorimanx?
You need to flash the JB kernel of Dorimanx (v7.x)
Click to expand...
Click to collapse
i flashed this "http://androidforums.com/galaxy-s2-international-all-things-root/632804-dorimanx-kernel-ics-jb-dummies-guide.html"
in the
"Downloads
Dorimanx kernel downloads for ICS/JB, (v5.x) and JB+Mali, (v7.x)."
downloaded and flashed this in recovery
Tequila6808 said:
which kernel have you flashed from Dorimanx?
You need to flash the JB kernel of Dorimanx (v7.x)
Click to expand...
Click to collapse
I flashed this
"Downloads
Dorimanx kernel downloads for ICS/JB, (v5.x) and JB+Mali, (v7.x).
Hawker's GS2Wiper download."
Under this link " http://androidforums.com/galaxy-s2-...804-dorimanx-kernel-ics-jb-dummies-guide.html "
andyzeng1993 said:
i flashed this "http://androidforums.com/galaxy-s2-international-all-things-root/632804-dorimanx-kernel-ics-jb-dummies-guide.html"
in the
"Downloads
Dorimanx kernel downloads for ICS/JB, (v5.x) and JB+Mali, (v7.x)."
downloaded and flashed this in recovery
Click to expand...
Click to collapse
Go to :http://dorimanx.shine.sk/ and flash v7.4 JB-MALI
Tequila6808 said:
Go to :http://dorimanx.shine.sk/ and flash v7.4 JB-MALI
Click to expand...
Click to collapse
thanks i got it working but i keep getting a message says "unfortunately system UI has stopped working" ???
and all my contacts are gone? but my contacts are all saved in SIM card? but nothing pops up...
and also my drop down menu isn't working, when i scroll down from the top, nothing drops down...
andyzeng1993 said:
thanks i got it working but i keep getting a message says "unfortunately system UI has stopped working" ???
and all my contacts are gone? but my contacts are all saved in SIM card? but nothing pops up...
and also my drop down menu isn't working, when i scroll down from the top, nothing drops down...
Click to expand...
Click to collapse
Reflash Rom without wipe and wipe cache.Or try another Rom.
Tequila6808 said:
Reflash Rom without wipe and wipe cache.Or try another Rom.
Click to expand...
Click to collapse
any rom you suggest?
andyzeng1993 said:
any rom you suggest?
Click to expand...
Click to collapse
Yeah stock 4.0.3 and leave it at that.
I dont think you are cut out for all this modding
andyzeng1993 said:
any rom you suggest?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1569686
HELP needed ..!!
okay, so i followed this steps ( http://www.youtube.com/watch?v=7tgmmQgRrZw ) to unlock bootloader of my wt19i .. did it as it is shown .. now my phone is stuck in the logo sign when i'm trying to turn it on !! need help asap.
prds359 said:
HELP needed ..!!
okay, so i followed this steps ( http://www.youtube.com/watch?v=7tgmmQgRrZw ) to unlock bootloader of my wt19i .. did it as it is shown .. now my phone is stuck in the logo sign when i'm trying to turn it on !! need help asap.
Click to expand...
Click to collapse
Okay so here's a solution
1. Download flashtool first from here
2. Download ICS stock ftf from here
3. Now flash the ftf to your phone in FlashMode, when connected to PC
if any further query, let me know
Happy Flashing
thank u so much @Sangeet007 .. solved my purpose
Having another problem ..
didn't want to create another thread for this ..
so continuing here ..
Rooted completely & unlocked boot-loader of my wt19i ..
but CM 9.1 isn't installing ..
trying to flash it from CWM & it's showing
"E: Error in/sdcard/cm-9.1.0-coconut.zip
(Status 7) Installation aborted."
help needed ASAP ..
seems like if we don't create new thread, no one's going to notice !!!! :'(
HELP needed here ! please .!
Download the rom again and transfer it to your phone. Flash the kernel from inside the rom.zip, then flash the rom after performing wipe data/factory reset and wipe cache
Sent from my Nexus 4 running Android 4.3
facing the same problem! can it be done with any software like flashtool or such?
prds359 said:
facing the same problem! can it be done with any software like flashtool or such?
Click to expand...
Click to collapse
No, you have to flash it using cwm
Could it be you wiped /system before flashing? Because you shouldn't do that!
So there's the problem !!!
what i did -
wiped data/ factory reset
wiped cache partition
wiped dalvik cache ..
Solution please
prds359 said:
So there's the problem !!!
what i did -
wiped data/ factory reset
wiped cache partition
wiped dalvik cache ..
Solution please
Click to expand...
Click to collapse
After wiping delvic cache did u frmat the system ,data ,cache which located in the advanced tab ???
can u gve me the link that the rom ur trying to install??
*first flash the recommended kernal
*Wipe Data/Factory Reset
*Wipe Cache Partition
*Wipe Dalvik Cache
*Go to Mounts & Storage
*Format Data
*Format Cache
*Format System
*Install zip from sd card
**if isnt work this again please try to install anyother rom and see what happen ...
downloaded the file from the official site ( http://download.cyanogenmod.com/?device=coconut&type=stable )
1. no i didn't format the system after wiping dalvik cache.
2. from where & how do i flash the kernel? i have downloaded the ROM & the Gapps.!
prds359 said:
downloaded the file from the official site ( http://download.cyanogenmod.com/?device=coconut&type=stable )
1. no i didn't format the system after wiping dalvik cache.
2. from where & how do i flash the kernel? i have downloaded the ROM & the Gapps.!
Click to expand...
Click to collapse
The kernel is the boot.img inside the zip. If you want to know how to flash it, check my guide on how to install a custom rom/kernel
And you could do the following:
1. Open the zip
2. Go to META-INF/com/google/android/
3. Open the updater-script using notepad ++
4. Delete the first 3 lines saying "assert getprop"
5. Save it and repack the zip
6. Flash it
Maybe it works then! :good:
mihahn said:
The kernel is the boot.img inside the zip. If you want to know how to flash it, check my guide on how to install a custom rom/kernel
And you could do the following:
1. Open the zip
2. Go to META-INF/com/google/android/
3. Open the updater-script using notepad ++
4. Delete the first 3 lines saying "assert getprop"
5. Save it and repack the zip
6. Flash it
Maybe it works then! :good:
Click to expand...
Click to collapse
did exactly what was described to your link to flash the kernel ..
it was successful.. but my phone is stuck to the Logo when am trying to turn it on ..
another problem is, in CWM menu the back key (power button) isn't working at all ..
what should i do next?
have attached the error screen.
Then flash a another kernal ,stuck on the logo happens coz the flashed kernal didnt support very well for ur android version.
Sent from my WT19i using xda premium
can you please suggest me a good ROM & kernel for WT19i please?
i was trying CM 9.1
Kernal-rege,kappa,lupus
Rom-honami i1,flawless ICS,next gen 7rom
Sent from my WT19i using xda premium
Arrow11 said:
Kernal-rege,kappa,lupus
Rom-honami i1,flawless ICS,next gen 7rom
Sent from my WT19i using xda premium
Click to expand...
Click to collapse
okay so i flashed this ( http://forum.xda-developers.com/showthread.php?t=2167119 ) kernal ..
phone still won't work after logo sign ..
and am unable to access phone's memory card. ..
pc is't detecting it anymore!
what to do now?
prds359 said:
okay so i flashed this ( http://forum.xda-developers.com/showthread.php?t=2167119 ) kernal ..
phone still won't work after logo sign ..
and am unable to access phone's memory card. ..
pc is't detecting it anymore!
what to do now?
Click to expand...
Click to collapse
when sony logo appears plz start to press vol- rapidly..u can acces to recovery there..in there u can mount ur sd card using mount and storage option .if u cant acces to recovery u should flash this kernal http://forum.xda-developers.com/showthread.php?t=1398910
i recovered most of 4ns using rege kernal
no progress with rage kernal too! stuck to logo sign.
phone was running well before flashing any kernal.
is there any way to take it back to that position again?
**phone is rooted & boot-loader is unlocked.
prds359 said:
no progress with rage kernal too! stuck to logo sign.
phone was running well before flashing any kernal.
is there any way to take it back to that position again?
**phone is rooted & boot-loader is unlocked.
Click to expand...
Click to collapse
Flash the stock rom in flashmode using flashtool. If you don't know how to do that, use the search
Sent from my Nexus 4 running Android 4.3
Hey,
I installed Cyanogenmod 11 mith the Installer on my S3. Ran for more than 1-2 month but since today it won't start. My device is always stuck on the bootloader.
What can I do ?
Eroor said:
Hey,
I installed Cyanogenmod 11 mith the Installer on my S3. Ran for more than 1-2 month but since today it won't start. My device is always stuck on the bootloader.
What can I do ?
Click to expand...
Click to collapse
Can you get into recovery or download mode? If yes full wipe in recovery and install a new rom or flash back to stock with Odin and start again.
tallman43 said:
Can you get into recovery or download mode? If yes full wipe in recovery and install a new rom or flash back to stock with Odin and start again.
Click to expand...
Click to collapse
Is there any way to first save personal data (Pictures etc.) ? Abd yes I can get into Recovery / Download mode.
Eroor said:
Is there any way to first save personal data (Pictures etc.) ? Abd yes I can get into Recovery / Download mode.
Click to expand...
Click to collapse
Yes install PhilZ recovery it as a option to use file Aroma to backup and move files look here >> http://forum.xda-developers.com/showthread.php?t=2201860 << especially the "Special Features Guide" also it as custom backup options.
tallman43 said:
Yes install PhilZ recovery it as a option to use file Aroma to backup and move files look here >> http://forum.xda-developers.com/showthread.php?t=2201860 << especially the "Special Features Guide" also it as custom backup options.
Click to expand...
Click to collapse
Hey, that helped. But when I press the Wipe Data/Factory Reset button, the phone just restarts and gets back in loop.
Eroor said:
Hey, that helped. But when I press the Wipe Data/Factory Reset button, the phone just restarts and gets back in loop.
Click to expand...
Click to collapse
Be careful because PhilZ as a option to do a normal wipe factory reset but also a option to install a new rom which formats all the necessary files to do that including your system (rom). This can leave you without a rom to boot into if you don't know how to use it propably,I would just recommend just flashing back to stock with Odin (and don't forget to factory reset after using Odin.
tallman43 said:
Be careful because PhilZ as a option to do a normal wipe factory reset but also a option to install a new rom which formats all the necessary files to do that including your system (rom). This can leave you without a rom to boot into if you don't know how to use it propably,I would just recommend just flashing back to stock with Odin (and don't forget to factory reset after using Odin.
Click to expand...
Click to collapse
Flashed it back. Wiped data - Still bootloop.
Eroor said:
Flashed it back. Wiped data - Still bootloop.
Click to expand...
Click to collapse
If you have tried flashing stock (and you have flashed everything correctly and wiped correctly) and you are still stuck in bootloop the only option I can see is to try the rescue firmware in the stickies forum.
Be very careful and follow instructions carefuly as it containes a pit file,if this failes then I would suggest service repair.
tallman43 said:
If you have tried flashing stock (and you have flashed everything correctly and wiped correctly) and you are still stuck in bootloop the only option I can see is to try the rescue firmware in the stickies forum.
Be very careful and follow instructions carefuly as it containes a pit file,if this failes then I would suggest service repair.
Click to expand...
Click to collapse
Tried to wipe again and booted up. It just took longer than normal (5mins) and then it booted up as normally. Thank you very much !
Now, if I want to flash Cyanogenmod again (Not Installer !), I just have to root and then flash Cyanogen Mod, right ?
Eroor said:
Tried to wipe again and booted up. It just took longer than normal (5mins) and then it booted up as normally. Thank you very much !
Now, if I want to flash Cyanogenmod again (Not Installer !), I just have to root and then flash Cyanogen Mod, right ?
Click to expand...
Click to collapse
Yep I agree don't use installer seen alot of problems with it... If you just want to install Cyanogen Mod (or any custom rom) with custom recovery then you do not need to root (only root if you want to backup or access anything from system), all custom roms come with root included. Just use a custom recovery wipe then flash your rom (factory reset if it bootloops) done.
tallman43 said:
Yep I agree don't use installer seen alot of problems with it... If you just want to install Cyanogen Mod (or any custom rom) with custom recovery then you do not need to root (only root if you want to backup or access anything from system), all custom roms come with root included. Just use a custom recovery wipe then flash your rom (factory reset if it bootloops) done.
Click to expand...
Click to collapse
HI tall man, Same here Ive stuck in Samsung galaxy Siii GT-I9300 Logo only, and i cant also go to recovery mode, which i dont know. but i can go to download mode. this happen after my phone restart automatically. verison 4.4.2 kitkat by archi, Thanks