So I had the 1.36 ROM. I installed Android Revolution ROM and I backed it up with CWM. I locked my bootloader and installed the new 1.43 ROM. I rooted it and installed the Android Revolution ROM. I restored my backup on and now when I try to turn on my WiFi, it says error. It says error with the WiFi hotspot as well. Any ideas to get it to work?
hasoon2000 said:
So I had the 1.36 ROM. I installed Android Revolution ROM and I backed it up with CWM. I locked my bootloader and installed the new 1.43 ROM. I rooted it and installed the Android Revolution ROM. I restored my backup on and now when I try to turn on my WiFi, it says error. It says error with the WiFi hotspot as well. Any ideas to get it to work?
Click to expand...
Click to collapse
Flash the kernel for your rom from fastboot.
You might have to flash it twice, rebooting in between.
Binary100100 said:
Flash the kernel for your rom from fastboot.
Click to expand...
Click to collapse
I never changed the kernel though.
Just flashed this kernel.
http://forum.xda-developers.com/showthread.php?t=1359951
Still didn't work.
Edit: I reflashed the kernel and it worked. It said in the thread "NOTE: Because the previous kernel included a Secured RAM Disk, so you may need to run the script twice. (Once this is done, then any subsequent flash should complete on the first time)"
So you must flash the kernel TWICE so it works. Thanks for the help!
in same situation..need some help please!!
hi all. i'm new to flashing kernels to phones manually. i have usually always used roms which have the stable kernels built in.
I just installed the beastmod 2.2 version and it has a separate kernal. i'm facing the same issue as my wifi says error when i try to enable it. PLEASE HELP!!
I enabled android debugging and connected my phone (not fastboot mode, just regular). i navigated into my android sdk folder and platform tools. just to confirm that my device is being recognized i tried adb devices and my s/n comes up. then i tried doing fastboot flashall and it gives me "C:\Program Files (x86)\Android\android-sdk\platform-tools" i don't know what to do now
please can you provide with step to step steps how to flash a kernal (boot.img). i have also tried downloading kernal manager but it doesn't show any kernals in there for me to download.
any help will be greatly appreciated.
thanks in advance,
Eneet
UPDATE: UPDATE: so i tried running the command (fastboot boot boot.img) while in fastboot mode on the phone and it restarted my phone. then i tried turning my wifi on and still it shows as error. then i pulled out the battery and tried flashing the boot.img again in fastboot mode and phone restarted. still wifi isn't working. any suggestions??
hasoon2000 said:
Just flashed this kernel.
http://forum.xda-developers.com/showthread.php?t=1359951
Still didn't work.
Edit: I reflashed the kernel and it worked. It said in the thread "NOTE: Because the previous kernel included a Secured RAM Disk, so you may need to run the script twice. (Once this is done, then any subsequent flash should complete on the first time)"
So you must flash the kernel TWICE so it works. Thanks for the help!
Click to expand...
Click to collapse
I tried to flash this kernel, but it says update aborted. I don't have Arabic or wifi!
Faruha said:
I tried to flash this kernel, but it says update aborted. I don't have Arabic or wifi!
Click to expand...
Click to collapse
Your not flashing it in Recovery are you?
Download and extract the ZIP on your computer, connect your phone, and run "Flash.bat"
It is all automated from there and does everything for you.
Nshih422 said:
Your not flashing it in Recovery are you?
Download and extract the ZIP on your computer, connect your phone, and run "Flash.bat"
It is all automated from there and does everything for you.
Click to expand...
Click to collapse
OMG! It totally worked!!!!!!!! I could kiss you right now!!!!!!!! Thank you sooooooooooooooooo much! I have wi-fi and I have Arabic!!!!!!!!!!! You guys are AMAZINGGGGGGGG. I love you <3<3<3 !!!! God bless. I am gonna go through all the forums and read and learn as much as I can and totally un-noob myself. Thank youuuuuu!!!!!!
thanks
Nshih422 said:
Your not flashing it in Recovery are you?
Download and extract the ZIP on your computer, connect your phone, and run "Flash.bat"
It is all automated from there and does everything for you.
Click to expand...
Click to collapse
i got this problem for the last weeks...resolved
Related
I just now tryed flashing the oc kernel for 2.3.4 for the atrix and now i do not have any service on my phone??? It is imperative that i can get this up and running again asap as its my work phone too I dont have cwm any more after -w . pls if someone could help me asap i would greatly appreciate it. i have no idea what i can do to fix this problem
I have Alien 2 installed
Install ROM Manager from market, and use it to flash the stock kernel
Sent from my MB860 using XDA App
neer2005 said:
Install ROM Manager from market, and use it to flash the stock kernel
Sent from my MB860 using XDA App
Click to expand...
Click to collapse
can not get to the market cuz i have no data connection
jjeffries0423 said:
I just now tryed flashing the oc kernel for 2.3.4 for the atrix and now i do not have any service on my phone??? It is imperative that i can get this up and running again asap as its my work phone too I dont have cwm any more after -w . pls if someone could help me asap i would greatly appreciate it. i have no idea what i can do to fix this problem
I have Alien 2 installed
Click to expand...
Click to collapse
Ok let find out what is wrong:
If you said this "I dont have cwm any more after -w" that mean that you actually have Tenfars old bootstrap CWM because moto-fastboot -w or fastboot -w -> DO NOT TOUCH the recovery partition at ALL.
So please answer the following so we can help you:
Do you have bootloader unlocked? how can you check if everytime you boot your phone it show up a tag "unlocked" on the left top corner if is YES ok you HAVE actually and unlocked bootloader. And it seem yes because you confirmed that you have Alien 2 ROM
So from my point of view: it seem you try to install the OC with an old tenfar CWM (bootstrap) and that make all the mess...
Just check and answer and I will try to help you
i was saying no more cwm because i could have just restored nandroid. yes i do have unlocked bl. i tryed to install oc kernel with fastboot commands
im guessing I need to find the stock kernel for 2.3.4 and flash it with fastboot then everything should be good again?
Look in faux123's kernel thread, he has the stock kernel posted
Sent from my MB860 using XDA App
i found Atrix-GB-Kernel-591-moto.zip wich is the 2.3.4 stock kernel. but it is a zip file with boot.img in the kernel folder is there any way i can use fast boot to flash this?
Here is the stock radio img...
http://bandbinnovations.com/xda/gingerbread/radio.zip
put the img file in a folder and use fastboot to flash radio to your phone.
cd c:\fastboot
c:\fastboot> fastboot flash radio c:\radio.img (or whatever folder you have it in)
jjeffries0423 said:
i was saying no more cwm because i could have just restored nandroid. yes i do have unlocked bl. i tryed to install oc kernel with fastboot commands
Click to expand...
Click to collapse
ok did you try Faux OC right? did you install the lib?
there is a file dhd.ko that you need to install in /system/lib ?
Phoneguy589 said:
Here is the stock radio img...
http://bandbinnovations.com/xda/gingerbread/radio.zip
put the img file in a folder and use fastboot to flash radio to your phone.
cd c:\fastboot
c:\fastboot> fastboot flash radio c:\radio.img (or whatever folder you have it in)
Click to expand...
Click to collapse
rebooting now will update
Still no service........
I dont even have the files folder in my menu to try and sideload tenfar's again and just restore my nandroid
Im getting the ! with the android robot
mramirezusa said:
ok did you try Faux OC right? did you install the lib?
there is a file dhd.ko that you need to install in /system/lib ?
Click to expand...
Click to collapse
I thought it was faux's but it turned out to be hktw-kernel-ramdisk that worked for me but it didnt work lol
i have flashed numerous roms but this was the first time trying to flash a custom kernel. probablly wont be trying it anytime again soon. I am trying to say good night to my wife and kids and i cant i work on the road and im bored in the hotel so i figured id give it a try
but no i didnt do anything with a dhd.ko i tryed flashing CG59.img-ramdisk in fast boot first and could not get it to work. then i read a little more and found the hktw-kernel and it flashed but when it restarted thats when this all happened
I try not to flash as much as possible. I would flash over the latest CWM... http://forum.xda-developers.com/attachment.php?attachmentid=641508&d=1309404399
Then install a complete rom like Ninja. Also try resetting your APN's 1st and see if that works. Faux's kernel insalls through CWM which is nice and easy. I couldn't figure out edgan's oc install so I just went with Faux's. Ninja come OC'd to 1.2 but SetCPU only allows 1.1ghz so far.
Phoneguy589 said:
I try not to flash as much as possible. I would flash over the latest CWM... http://forum.xda-developers.com/attachment.php?attachmentid=641508&d=1309404399
Then install a complete rom like Ninja. Also try resetting your APN's 1st and see if that works. Faux's kernel insalls through CWM which is nice and easy. I couldn't figure out edgan's oc install so I just went with Faux's. Ninja come OC'd to 1.2 but SetCPU only allows 1.1ghz so far.
Click to expand...
Click to collapse
that is the cwm i had. i think it was edgans that I was trying to do. so how can i start over with just fastboot to use? I can not side load right now because i do not have the files folder in my menu to boot into cwm
I cant see my apns either. settings is not working nothing. its like i have a phone with nothing on it. If someone could point me in the right direction to just start over and put Ninja on w/o the use of cwm some how that would be great im in a complete panic right now......
Can you get into fastboot recovery protocol?
If so, download CWM (from the link I posted above), and > fastboot flash recovery c:\recovery-en-goapk-0630-1029.img
Thank will put CWM back on your phone then you can download Ninja and install from sd.
thank you going to give it a try right now just got done d/ling ninja rom sf
yes i can get into fastboot thats the only thing i can do
sonofa***** it said finished in the cmd fastboot reboot and its still not in my menu... omg i do not know what im going to do
When you power up and hold the volume down button you see fastboot right? What happens if you press the vol down button a few times?
i got all the menu's in there
Hi everybody,
here is my problem: I can not boot any kind of ROM or recovery image. CWM is working properly (it is an internal CWM). I have this issue since I tried to install the CM9 with 3.0.x kernel. I am pretty sure that this situation is all my fault, I mean, I do not think the nook has any kind of damage.
How can I fix it?
PS: I can easily flash the ROMs and the recovery images, but when I reboot the device, it just reboots in CWM.
PPS: I don't know if this can be useful: at the end of the flashing process it says "sd-ext.img not found. skipping restore of sd-ext".
Thanks
dariodejaneiro said:
Hi everybody,
here is my problem: I can not boot any kind of ROM or recovery image. CWM is working properly (it is an internal CWM). I have this issue since I tried to install the CM9 with 3.0.x kernel. I am pretty sure that this situation is all my fault, I mean, I do not think the nook has any kind of damage.
How can I fix it?
PS: I can easily flash the ROMs and the recovery images, but when I reboot the device, it just reboots in CWM.
PPS: I don't know if this can be useful: at the end of the flashing process it says "sd-ext.img not found. skipping restore of sd-ext".
Thanks
Click to expand...
Click to collapse
The message at end is normal. Did you create a backup using cwm prior to attempting to load new rom? Did you perform reset and clear cache post loading new rom? What were you running prior to this? This might help in determining what the issue is.
Sent from my Nook Tablet using xda premium
tmjohnsonfse said:
The message at end is normal. Did you create a backup using cwm prior to attempting to load new rom? Did you perform reset and clear cache post loading new rom? What were you running prior to this? This might help in determining what the issue is.
Sent from my Nook Tablet using xda premium
Click to expand...
Click to collapse
- Yes, I've created a backup before loading the new ROM but not using CWM (I've used rom manager).
- Yes, I performed wipe cache and data after loading the ROM.
- When everything was working fine I was on CM7 Alpha Final (the all-in-one-mod version).
Check if there is a backup file in SD/clockworkmod/backup. If so, try restoring backup through CWM. I've had the same problem flashing cm9 3.01 with CWM 5.0. The easiest way back was to restor a backup of previous mod.
Good luck
DavDoc said:
Check if there is a backup file in SD/clockworkmod/backup. If so, try restoring backup through CWM. I've had the same problem flashing cm9 3.01 with CWM 5.0. The easiest way back was to restor a backup of previous mod.
Good luck
Click to expand...
Click to collapse
Yeah I've already tried it. Still rebooting in CWM.
dariodejaneiro said:
- Yes, I've created a backup before loading the new ROM but not using CWM (I've used rom manager).
Click to expand...
Click to collapse
The problem is with the kernel I guess, try flashing any 2.xx kernel nd wipe everything nd flash a cm7 ...
Sent from my Nexus One using xda app-developers app
AC DC said:
The problem is with the kernel I guess, try flashing any 2.xx kernel nd wipe everything nd flash a cm7 ...
Click to expand...
Click to collapse
Uhm yeah I'll try but... How can I flash a 2.xx kernel? I've flashed the 3.xx kernel when I was on CM9 with the original 2.xx kernel. I don't know how to do this on CWM. Thanks by the way
dariodejaneiro said:
Uhm yeah I'll try but... How can I flash a 2.xx kernel? I've flashed the 3.xx kernel when I was on CM9 with the original 2.xx kernel. I don't know how to do this on CWM. Thanks by the way
Click to expand...
Click to collapse
If u have any zip file of cm7 rom extract it on ur PC there u will find a file "boot.img" , copy it to ur fastboot folder, then in command prompt type "fastboot boot boot.img", that's it the old 2.xx kernel will be flashed
AC DC said:
If u have any zip file of cm7 rom extract it on ur PC there u will find a file "boot.img" , copy it to ur fastboot folder, then in command prompt type "fastboot boot boot.img", that's it the old 2.xx kernel will be flashed
Click to expand...
Click to collapse
Ok I have some questions.
- Where exactly is the "fastboot folder"?
- Do I have to plug in the SD card into the computer before using the terminal?
Sorry for my ignorance!
Everything here usage, commands etc..
http://wiki.cyanogenmod.com/wiki/Fastboot
Connect ur device with the data cable and use fastboot, one more thing, u should install ur device USB drivers first
AC DC said:
Everything here usage, commands etc..
http://wiki.cyanogenmod.com/wiki/Fastboot
Connect ur device with the data cable and use fastboot, one more thing, u should install ur device USB drivers first
Click to expand...
Click to collapse
Ok I will study everything. Still thanks.
PS: I have a Mac. Do I always need the drivers?
Yes, drivers are compulsory
Where can I find the drivers?
Oops sorry, no need of drivers for Mac
http://developer.android.com/tools/extras/oem-usb.html
By the way, the command is
Code:
fastboot flash boot boot.img
In addition, before you go flashing new kernels, you might want to try and just re-flash CWM. Not sure if it would work, but it's just a thought. You could boot into a CM7 SD ROM, then use @Indirect's Recovery Flasher App to re-flash CWM to see if you just had a bad recovery install. At any rate, good luck.
Ok. But I can't make fastboot works! When I open the program (that is a terminal window) I'm not able to type anything.
Solar.Plexus said:
In addition, before you go flashing new kernels, you might want to try and just re-flash CWM. Not sure if it would work, but it's just a thought. You could boot into a CM7 SD ROM, then use @Indirect's Recovery Flasher App to re-flash CWM to see if you just had a bad recovery install. At any rate, good luck.
Click to expand...
Click to collapse
I would like to try it but I'm not able to boot anything except for the actual CWM. No backups, no ROMs.
dariodejaneiro said:
I would like to try it but I'm not able to boot anything except for the actual CWM. No backups, no ROMs.
Click to expand...
Click to collapse
Don't open the terminal in that folder, just open the normal terminal and type"fastboot", now u should able to see the list of fastboot commands
AC DC said:
Don't open the terminal in that folder, just open the normal terminal and type"fastboot", now u should able to see the list of fastboot commands
Click to expand...
Click to collapse
When I write "fastboot" nothing happens (it says "command not found").
I don't know if this could help: I just would like to make it run. I don't need any particular ROM. Even a "simple" unrooted stock could be good. I don't mind if I will loose all the data.
Hello, I just got my Rezound today and the first thing I did was Unlocked the phone, Installed CWM and Rooted it Via [TOOL] [7-3-2012] HTC Rezound All-In-One Toolkit V2.1.
Everything was working fine. I could get into CWM recovery. I could still boot into the stock rom.
Next I downloaded NeWts-One-XxX-RLS-3.1.2-odex-signed.zip.
I wiped data/factory reset. wiped dalvik cache. installed the rom successfully..
When I reboot, I get stuck at the white HTC boot screen. I can still access CWM. I tried wiping and reinstalling. I tried downloading a different version of this rom. Nothing worked.
Should I try installing AmonRa? Can I just install right over CWM?
To clarify, I have not done anything other than what I have just said. I have not installed any custom kernels. Did not make a backup of the original rom (because it froze mid backup). I did not even use the phone at all before unlocking/rooting other than to make sure it booted.
Thanks in advance
Mike
i guess u on S-ON
so u need to install the kernel
Proz00 said:
i guess u on S-ON
so u need to install the kernel
Click to expand...
Click to collapse
I am S-ON. Which Kernel?
Thanks for the reply :good:
You need to extract the boot.img file from the rom zip then use fastboot on your PC to flash it.
If you're not sure how to set up fastboot, I believe the all in one toolkit contains the needed files, following the instructions in the thread to download, install and use it.
http://forum.xda-developers.com/showthread.php?t=1504824
mjones73 said:
You need to extract the boot.img file from the rom zip then use fastboot on your PC to flash it.
If you're not sure how to set up fastboot, I believe the all in one toolkit contains the needed files, following the instructions in the thread to download, install and use it.
http://forum.xda-developers.com/showthread.php?t=1504824
Click to expand...
Click to collapse
Oh okay. Wasn't familiar how to flash kernels on this device.
Its working now. :good::good:
thanks and have a splendid day!!
mtotho said:
Oh okay. Wasn't familiar how to flash kernels on this device.
Its working now. :good::good:
thanks and have a splendid day!!
Click to expand...
Click to collapse
Be aware that if you are on Gingerbread firmware (you are!) and running ICS ROMS, you need to flash the "Oldfirmware" patch to mount the SD card correctly.
Since you are S-on...every time you flash a rom you will have to flash...
1. The rom
2. the kernel (boot.img) that goes with the rom. You'll either have to pull this out of the rom itself or most dev. provide it as a PH98img file to flash in bootloader.
3. If an ICS ROM...flash oldfirmware patch.
ALSO, you didn't mention it but there is a patch to RLS 3.2.1 that correct some minor bugs. Its on themikmik ! Have fun.
EEK....use AmonRA NOT CWM
mtotho said:
Oh okay. Wasn't familiar how to flash kernels on this device.
Its working now. :good::good:
thanks and have a splendid day!!
Click to expand...
Click to collapse
No problem, that's some good advice from topgun also.
Hi All!
I have an HTC One X+, International. I have decided to try and "play" with it and so I have Unlocked and Rooted and then tried Installing a Custom Rom, based on those instructions:
http://forum.xda-developers.com/showthread.php?t=2213910
Unlock and Root went well, and so installing TWRP (its present).
Then I got here: http://forum.xda-developers.com/showthread.php?t=2067325
After trying to install the ROM (first image then zip - followed the instructions), the device is booting with the CM logo spinning, but then it gives out an "Unfortunately, NFC Service has stopped " error...
Please help!
I tried to go back to the original restore via TWRP - no luck. The HTC screen appears and then stuck in it.
moxah1981 said:
Hi All!
I have an HTC One X+, International. I have decided to try and "play" with it and so I have Unlocked and Rooted and then tried Installing a Custom Rom, based on those instructions:
http://forum.xda-developers.com/showthread.php?t=2213910
Unlock and Root went well, and so installing TWRP (its present).
Then I got here: http://forum.xda-developers.com/showthread.php?t=2067325
After trying to install the ROM (first image then zip - followed the instructions), the device is booting with the CM logo spinning, but then it gives out an "Unfortunately, NFC Service has stopped " error...
Please help!
I tried to go back to the original restore via TWRP - no luck. The HTC screen appears and then stuck in it.
Click to expand...
Click to collapse
Try and flash another ROM & Image. It appears the ROM might not have been downloaded properly.
BTW what happened after it gave the NFC error? Did you complete the rest of the process and simply restarted the device?
flash the CORRECT kernel! read the op!!!!!!! why do you people not read?! seriously!
full wipe the rom before flashing CM on top of whatever you had before!
the rom works correct! the problem is you
Cant flash another rom
Addicted2xda said:
Try and flash another ROM & Image. It appears the ROM might not have been downloaded properly.
BTW what happened after it gave the NFC error? Did you complete the rest of the process and simply restarted the device?
Click to expand...
Click to collapse
I cant get a new rom to the device - the computer stopped recognizing it and I have no idea how to get a file on it (maybe somehow via the terminal/SDK.bat?).
After it gives the NFC error, there is an "OK' button. I hit it a few times and nothing happens. Then the screen goes off and I cant turn it back on, unless I use the power button/volume down...
I did though tried a different image... same result.
moxah1981 said:
I cant get a new rom to the device - the computer stopped recognizing it and I have no idea how to get a file on it (maybe somehow via the terminal/SDK.bat?).
After it gives the NFC error, there is an "OK' button. I hit it a few times and nothing happens. Then the screen goes off and I cant turn it back on, unless I use the power button/volume down...
I did though tried a different image... same result.
Click to expand...
Click to collapse
I am assuming you have latest ADB tools installed in your system.
You can use ADB sideload to copy ROM in the phone
When you are pressing the powerbutton + vol down - I hope you are getting to boot loader?
Lloir said:
flash the CORRECT kernel! read the op!!!!!!! why do you people not read?! seriously!
full wipe the rom before flashing CM on top of whatever you had before!
the rom works correct! the problem is you
Click to expand...
Click to collapse
Hi Lloir!
I much appreciate the personnel response and the time you took to reply to me.
Before I had the original HOX+ rom+sense and I believe I DID a full wipe
I flashed the kernel from your post. I believe that my lack of knowledge lead me to download the wrong one (?) boot-BLADE-42-201305062233
Would you be so kind and please guide me to the correct steps? I have spent several hours allready trying to fix this issue.
Once again, your (and everyone else`s) help is MUCH appreciated!
moxah1981 said:
Hi Lloir!
I much appreciate the personnel response and the time you took to reply to me.
Before I had the original HOX+ rom+sense and I believe I DID a full wipe
I flashed the kernel from your post. I believe that my lack of knowledge lead me to download the wrong one (?) boot-BLADE-42-201305062233
Would you be so kind and please guide me to the correct steps? I have spent several hours allready trying to fix this issue.
Once again, your (and everyone else`s) help is MUCH appreciated!
Click to expand...
Click to collapse
sorry for my ranty response: anyway
the kernel you need is boot-BLADE-CM10.1-whateverdatehere
not the 42 kernels, those are for AOSP\PA\AOKP
soon this won't be an issue
-Lloir
Addicted2xda said:
I am assuming you have latest ADB tools installed in your system.
You can use ADB sideload to copy ROM in the phone
When you are pressing the powerbutton + vol down - I hope you are getting to boot loader?
Click to expand...
Click to collapse
Sorry, I am going to try Lloir`s solution... You guys reply so fast that I dont manage to reply in time to all!
THANK YOU very much!
Lloir said:
sorry for my ranty response: anyway
the kernel you need is boot-BLADE-CM10.1-whateverdatehere
not the 42 kernels, those are for AOSP\PA\AOKP
soon this won't be an issue
-Lloir
Click to expand...
Click to collapse
This was FAST answer!
I see my mistake (reading comprehension) :
CM10 - for 4.1 based roms e.g. CM10 and AOKP 4.1.2
CM10.1 - ONLY for CM10.1
42 - 4.2 based roms e.g. AOKP 4.2.1 and AOSP 4.2.1
I thought that your ROM is based on the 4.2 (?)
Downloading the Kernel now.
By the way, when and how do I add the gapps?
flash kernel
flash rom
after rom flash the gapps
vensterbank said:
flash kernel
flash rom
after rom flash the gapps
Click to expand...
Click to collapse
Thank you. I already flashed kernel and rom. Phone booted up and seem to work. A few issues:
1) I did not put the gapps zip on the phone before the process.
2) Though the phone appears as a drive in Windows, I can not copy any file to it.
3) Camera says NO SD Card and exits....
Thank you for your help!
moxah1981 said:
This was FAST answer!
I see my mistake (reading comprehension) :
CM10 - for 4.1 based roms e.g. CM10 and AOKP 4.1.2
CM10.1 - ONLY for CM10.1
42 - 4.2 based roms e.g. AOKP 4.2.1 and AOSP 4.2.1
I thought that your ROM is based on the 4.2 (?)
Downloading the Kernel now.
By the way, when and how do I add the gapps?
Click to expand...
Click to collapse
Even if you install gapps after one full reboot - it won't be a problem... Actually - it's whenver you feel like
moxah1981 said:
Thank you. I already flashed kernel and rom. Phone booted up and seem to work. A few issues:
1) I did not put the gapps zip on the phone before the process.
2) Though the phone appears as a drive in Windows, I can not copy any file to it.
3) Camera says NO SD Card and exits....
Thank you for your help!
Click to expand...
Click to collapse
Go to the Lloir's thread there is a solution for it - I read. I don't remember it as I am not using AOSP / AOKP / CM ROM at the moment...
Addicted2xda said:
Even if you install gapps after one full reboot - it won't be a problem... Actually - it's whenver you feel like
Click to expand...
Click to collapse
Hi,
See my next post -
1) I cant copy any files to the phone.
2) I dont know HOW to install the gapps
Sorry for being a noob
moxah1981 said:
Hi,
See my next post -
1) I cant copy any files to the phone.
2) I dont know HOW to install the gapps
Sorry for being a noob
Click to expand...
Click to collapse
Use ADB sideload to copy the file...
I believe that will work.
Addicted2xda said:
Use ADB sideload to copy the file...
I believe that will work.
Click to expand...
Click to collapse
Thank you! What do I do AFTER I get the gapps.zip to the phone? what do I do with the TWRP?
Is this what I should do to get the zip to the phone:
Set the device into ADB sideload mode. In TWRP you do this by going to Advanced then ADB Sideload.
From the command line, type adb sideload /path/to/rom.zip
moxah1981 said:
Thank you! What do I do AFTER I get the gapps.zip to the phone? what do I do with the TWRP?
Is this what I should do to get the zip to the phone:
Set the device into ADB sideload mode. In TWRP you do this by going to Advanced then ADB Sideload.
From the command line, type adb sideload /path/to/rom.zip
Click to expand...
Click to collapse
Yup.
Then from TWRP flash the Zip.
Wipe Cache & Davlik...
Reboot...
Addicted2xda said:
Yup.
Then from TWRP flash the Zip.
Wipe Cache & Davlik...
Reboot...
Click to expand...
Click to collapse
ADB termianl says : "error: device not found"
Phone plugged to USB, debug mode etc...
Maybe I should just re-flash EVERYTHING - rom, image?
UPDATE: re-done everything, full wipe. Still camera wont work - "No sd card..." ALSO, still cant move anything to phone... help!
Gmail app?
OK, got the latest gapps. Installed.
Play Store wont open, camera says no sd card and no Gmail app (???)
moxah1981 said:
OK, got the latest gapps. Installed.
Play Store wont open, camera says no sd card and no Gmail app (???)
Click to expand...
Click to collapse
Did you create the '0' folder before flashing the ROM?
If not - would suggest you to load some other ROM...
Also, check the Lloir''s thread...
Need some help! I woke up with my phone in bootloop (only Samsung logo). It is a MTK6589 device with Samsung S5 ROM specifically designed for this device. It is a rooted device with CWM recovery in it. I have been flashing ROMs for quite a long time. I flashed a different ROM in it thinking so sure that it will fix the issue but to big surprise, nothing has changed. Samsung bootanim and bootlogo are still there and still in bootloop. I tried to reflash one more time, wiped everything (Dalvik, etc.) but still no luck. Now, I came up with one last resort: flash stock ROM by SPFT (SP Flash Tool). So I downloaded the stock ROM for my device, flashed it by SPFT. With full hope that I fixed my device perfectly, still it did not change anything. Still the same problem occurred after flashing the Stock ROM. Now, I am trying to go to recovery, but it is just keeps on booting. Recovery (either CWM or stock) is no longer accessible.
PS: Before it happened, my device keeps on reminding me of xmodgames app which is installed in my device saying it is dangerous etc.
I will really appreciate you replies.
elfeds916 said:
Need some help! I woke up with my phone in bootloop (only Samsung logo). It is a MTK6589 device with Samsung S5 ROM specifically designed for this device. It is a rooted device with CWM recovery in it. I have been flashing ROMs for quite a long time. I flashed a different ROM in it thinking so sure that it will fix the issue but to big surprise, nothing has changed. Samsung bootanim and bootlogo are still there and still in bootloop. I tried to reflash one more time, wiped everything (Dalvik, etc.) but still no luck. Now, I came up with one last resort: flash stock ROM by SPFT (SP Flash Tool). So I downloaded the stock ROM for my device, flashed it by SPFT. With full hope that I fixed my device perfectly, still it did not change anything. Still the same problem occurred after flashing the Stock ROM. Now, I am trying to go to recovery, but it is just keeps on booting. Recovery (either CWM or stock) is no longer accessible.
PS: Before it happened, my device keeps on reminding me of xmodgames app which is installed in my device saying it is dangerous etc.
I will really appreciate you replies.
Click to expand...
Click to collapse
Well did you flash it with proper drivers installed? try flashing with fastboot if it doesnt work with sp flash tool...what different rom are you talking about? if its not meant for your device then you are in trouble
xmod wont do anythg btw
KingWilliams said:
Well did you flash it with proper drivers installed? try flashing with fastboot if it doesnt work with sp flash tool...what different rom are you talking about? if its not meant for your device then you are in trouble
xmod wont do anythg btw
Click to expand...
Click to collapse
Sir,
Thank you for your response.
Correct drivers are installed. I have not tried flashing it with fastboot and I do not know what fastboot is. XD . The ROM I am trying to flash is the stock ROM of my device.
elfeds916 said:
Sir,
Thank you for your response.
Correct drivers are installed. I have not tried flashing it with fastboot and I do not know what fastboot is. XD . The ROM I am trying to flash is the stock ROM of my device.
Click to expand...
Click to collapse
fastboot is the most preferred method of flashing a stock firmware. If you dont know about that then a look at this for downloading and setting up fastboot http://forum.xda-developers.com/showthread.php?t=2588979
and this for how to use fastboot http://forum.xda-developers.com/showthread.php?t=2277112
hope it helps
KingWilliams said:
fastboot is the most preferred method of flashing a stock firmware. If you dont know about that then a look at this for downloading and setting up fastboot http://forum.xda-developers.com/showthread.php?t=2588979
and this for how to use fastboot http://forum.xda-developers.com/showthread.php?t=2277112
hope it helps
Click to expand...
Click to collapse
Sir,
I have already fastboot. But when I try to put commang FASTBOOT DEVICES it shows nothing. I can not access my recovery mode as well. When I try to press Vol Down+Power, it shows 3 boot options: normal, recovery, fastboot. But I can not select any of the three.
elfeds916 said:
Sir,
I have already fastboot. But when I try to put commang FASTBOOT DEVICES it shows nothing. I can not access my recovery mode as well. When I try to press Vol Down+Power, it shows 3 boot options: normal, recovery, fastboot. But I can not select any of the three.
Click to expand...
Click to collapse
Ok how did u select the options? I hope u have selected using power Button ...alternative will be once u r on that screen u can try that command again
KingWilliams said:
Ok how did u select the options? I hope u have selected using power Button ...alternative will be once u r on that screen u can try that command again
Click to expand...
Click to collapse
Thank you for your response sir. But I was not able to select anything. I tried to press power button to select fastboot, but not working. When it is on that screen, adb/fastboot also can not detect it. It is not going to any kind of recovery . I am afraid, my phone is totally dead.