[Q] Q: eh..uh...help.... - Galaxy S II Q&A, Help & Troubleshooting

Q: eh..uh...help....
Hi! I was doing this guide to do a STOCK ROOM format....
http://forum.xda-developers.com/showthread.php?t=731989&page=6
And it all went well i did the step-by-step guide...until Odin showed this "Do not turn of target"... ok so i w8 somewhat 10 mins and it still stood there..i was about to go from my desk to my printer when i accidently pulled the cable off from the computer and so it started...
First of all i dident take out my sim card before i did the procedure!
The phone was still in "Download mode" and i was unable to turn it off.
I opened the back cover to reach the battery and pulled it out and also i took out my sim card (just incase).
Tried to reboot my phone but it wont boot nor does it start to charge with the USB cable inserted in my PC.
My phone is practicly dead now and im kinda got a baad feeling about it...
Does anyone know or does anyone have a fix or solution for this?
Shouldent there be a reset button somewhere inside the phone to do a hard reset?
Note to reader: Ive done the hard and soft reset

yours phone is bricked (sorry to say that) , get a usbjig or find a tutorial and make one...
every flash interrupted is equal to brick !

lummujaj said:
yours phone is bricked (sorry to say that) , get a usbjig or find a tutorial and make one...
every flash interrupted is equal to brick !
Click to expand...
Click to collapse
Not necessarily.
A similar thing happened to me a while ago during a firmware update using Kies. I was able to use Odin to flash an older version of the firmware then reflash using Kies.
Plenty of guides on here about using Odin to 'unbrick'.

lummujaj said:
yours phone is bricked (sorry to say that) , get a usbjig or find a tutorial and make one...
every flash interrupted is equal to brick !
Click to expand...
Click to collapse
Oh no, Darn it -.-...ive shouldave just gottan an iphone -.-, Do you know where i can buy a jig ?

babblerx said:
Not necessarily.
A similar thing happened to me a while ago during a firmware update using Kies. I was able to use Odin to flash an older version of the firmware then reflash using Kies.
Plenty of guides on here about using Odin to 'unbrick'.
Click to expand...
Click to collapse
How can i use Odin to unbrick it when i cant get it in download mode ?

Look on eBay for "Samsung Galaxy S2 jig" (minus the ", obviously ). Shouldn't cost more than a couple of bucks. If that doesn't get you in download mode it's either back to Samsung/your telco or....
You could try this guy . I can't vouch for their service, but I have seen a couple of positive reviews on here from memory and they might end up being cheaper/easier than going the Samsung/telco route if they refuse to fix it under warranty.
I have also seen reports/experiences where the local Samsung outfit didn't care the phone had been messed with & fixed it under warranty anyway.
So you've got a couple of options
mathswk said:
Oh no, Darn it -.-...ive shouldave just gottan an iphone -.-, Do you know where i can buy a jig ?
Click to expand...
Click to collapse

oh Well, im gona let the phone stay still until tomorrow and see if i can get it working again... I might order a USBJIG if i dont order an iphone 4s

mathswk said:
oh Well, im gona let the phone stay still until tomorrow and see if i can get it working again... I might order a USBJIG if i dont order an iphone 4s
Click to expand...
Click to collapse
If I were you I would do whatever I could to get this phone fixed. I had a problem similar to yours mine got stuck in download mode after a failed attempt at rooting using oden. I guess I got lucky though because I pulled the battery and the phone booted right back up with no problems. I would highly suggest keeping this phone it is far better than the Iphone 4s. My bro has it and he is always amazed at the things I can do with my phone that his cant! Not to mention the screen is a whole inch bigger and looks ALLOT better! Also, dont forget the 4s only has 512mb ram and a dual core 800mhz cpu while this beast has 1gig of ram and a 1.2ghz cpu! Thats a total of 800 more mhz for the galaxy! Not to mention allot of custom roms allow you to overclock!

If you want to do some modding, you should order it anyway. jigs are very cheap and you can remove the yellow triangle with it if you switch to a custom kernel. And like others say, force the phone into download mode.
Don't give up yet. You won't regret being a bit patient here ;-)
Sent from my GT-I9100 using xda premium

lol, then go ahead and buy yourself an iphone4s...

Come on buddy...we know you bricked your phone so you could get the iPhone instead...
If you don't fix the sgs2 you can send it to me
Sent from my GT-I9100 using XDA App

Related

Tmobile/Samsung return possible?

Well my phone is bricked (stuck at vibrant screen) AND "Hardware Locked" (cant use button combinations to get to download mode or recovery) after trying to install a kernel that ended up not being for my firmware version..
IF at all possible i would like to be able to get into download or recovery mode but since im hardware locked i dont know how, so if anyone has any suggestions then their are more details in my previous thread.
forum.xda-developers.com/showthread.php?t=788189
BUT if i can't possibly restore my phone to working order i would like to get it replaced; now i have heard that you can get a free replacement under manufacturer warranty since it is "Hardware Locked". if anyone know if this is true and/or how to go about doing this, i would be eternally in your debt
When you find out you can't enter download mode via hardware, should have stopped modding there. No offense, I am no help but just saying..
PaiPiePia said:
When you find out you can't enter download mode via hardware, should have stopped modding there. No offense, I am no help but just saying..
Click to expand...
Click to collapse
as i had no need to try to enter recovery or download mode through the button combos (i used easier adb) i had no idea that it was locked
Thats too bad, ununbrickable?
if your still in your first 30 days (or whatever it is in ur state) then there shouldnt be a problem. Just dont say too much, and be more carefull next time
Sent from my vib
fit333 said:
Thats too bad, ununbrickable?
if your still in your first 30 days (or whatever it is in ur state) then there shouldnt be a problem. Just dont say too much, and be more carefull next time
Sent from my vib
Click to expand...
Click to collapse
That's what I did when Odin bricked me. They replaced it right there in the store. Even the techs on the phone didn't know what was going on with it. It was kind of funny to watch actually.
On a side note, why the hell are we still using Odin to flash when it is capable of bricking so often, when we have a perfectly good means of flashing through Clockwork?? Just saying.
if you have passed the 30 day return..you can still get Tmo to repair it because you have 1 year warranty. just pretend that you don't know a thing and say the other day you turned it on...it just got stuck on the vibrant screen.
aloneinshadow said:
That's what I did when Odin bricked me. They replaced it right there in the store. Even the techs on the phone didn't know what was going on with it. It was kind of funny to watch actually.
On a side note, why the hell are we still using Odin to flash when it is capable of bricking so often, when we have a perfectly good means of flashing through Clockwork?? Just saying.
Click to expand...
Click to collapse
I used Odin to flash the JI2 firmware and had no problems; it was only when (like an idiot) i used Clockwork to flash the new OC kernel without reading that its only for the STOCK rom >.<
trashcan said:
if you have passed the 30 day return..you can still get Tmo to repair it because you have 1 year warranty. just pretend that you don't know a thing and say the other day you turned it on...it just got stuck on the vibrant screen.
Click to expand...
Click to collapse
Thanks alot man ill try tomorow, so no charges or anything? because i had heard that since it is Hardware Locked their will be no charge, is this right?
And yall have all been a great help!
But hey, thanks for helping to drive up the cost of phones by trying to get a replacement due to user error.
KerryG said:
But hey, thanks for helping to drive up the cost of phones by trying to get a replacement due to user error.
Click to expand...
Click to collapse
the problem is not entirely user error, it is Samsung manufacturing these phones without an accessible recovery/download mode.
just call and pretend you know nothing.

[Q] Vibrant Galaxy S T-Mobile Desperate Help!

Hi. I ruined my phone when trying to add a new kernel (overclock 1.2).
It stayed on Vibrant/Samsung screen.
I downloaded one click odin.. LIKE AN IDIOT I DIDNT SEE IT WAS FOR CAPTIVE (AT&T) ONLY!!
NOW I DONT KNOW WHAT TO DO.
PLEASE HELP and link me to wherever i need to download stuff.
Before others eat you alive and flame you, look around dude. Look at the stickies.
C-4Nati said:
Before others eat you alive and flame you, look around dude. Look at the stickies.
Click to expand...
Click to collapse
I did, I couldnt find anything.
I don't think anyone has been a dumber noob than me..
ALSO it keeps just rebooting over and over and over.. I dont think it recognizes my battery idk..
MasterGGM said:
I did, I couldnt find anything.
I don't think anyone has been a dumber noob than me..
ALSO it keeps just rebooting over and over and over.. I dont think it recognizes my battery idk..
Click to expand...
Click to collapse
Put into download mode use odin to flash back to stock all the tools you need are in the sticky that says bible in it..........
Sent from my SGH-T959 using XDA App
S4BRE2121 said:
Put into download mode use odin to flash back to stock all the tools you need are in the sticky that says bible in it..........
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
Download mode doesnt work
It shows AT&T and keeps rebooting.. over and over. I have no idea if they will exchange it due to it being a t-mobile phone.
Maybe Try the jig
Not sure I know enough about the real issue other than you got the wrong rom. But, there is a jig you can make 301k resistor (or combo of a few to equal that number) soldered to a usb connector on # 4 & 5 pins look it up it will unbrick the phone and get you into the phone from there I not sure what you will need to do next but that would get you into the phone. Btw the resistors and usb cord less than 5 bucks good luck
Dude, you are being childish. I usually never flame but don't say you did because you didn't Enough. Slow down and take your time. If you are doing any kind of mods you should learn how to use Odin first, but unfortunately its always after the fact.
Learn how to use Odin, in the development bible I have a video there to show you how. Doesn't get any easier than that.
Sent from my SGH-T959 using XDA App
jzero88 said:
Dude, you are being childish. I usually never flame but don't say you did because you didn't Enough. Slow down and take your time. If you are doing any kind of mods you should learn how to use Odin first, but unfortunately its always after the fact.
Learn how to use Odin, in the development bible I have a video there to show you how. Doesn't get any easier than that.
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
You are completely right. I was "trigger happy" you may say and I did it by rushing through it and ruined my phone. Luckily I have not yet sold my 3Gs and could use that until I get tmobile to exchange it.
The jig would most likely work for my case but I would need a step by step guide which unfortunately didn't find with images or video.
If I could just kill the AT&T boot logo it'd be perfect but sadly I can't.
I got the phone two days ago..so I am really sure I can get away with an exchange.
If you return the phone and it is booting with the At&t logo they will now you where messing with it and charge you the full amount of the phone which is around $400.
What you have is a soft brick. You can fix it if you bothered reading. Just follow this:
http://forum.cyanogenmod.com/topic/...r-vibrant-and-return-to-stock-phone-pc-error/
Jamison904 said:
If you return the phone and it is booting with the At&t logo they will now you where messing with it and charge you the full amount of the phone which is around $400.
What you have is a soft brick. You can fix it if you bothered reading. Just follow this:
Click to expand...
Click to collapse
I wish mine was a soft brick but it isn't. That thread was for "phone ! PC" mine is a tmo vibrant that boot loops as AT&T captive since I flashed the wrong stock kernel.
Remove battery, SIM card and the external SD card.
Connect USB cord
Hold down both volume keys and insert the battery.
I love how everyone gives the same reply. The phone WAS FULLY BRICKED.
I took it to T-Mobile and said I did an update and this is what happened and they gave me a brand spanking new one! =D
Thanks for all your help though.
MasterGGM said:
I love how everyone gives the same reply. The phone WAS FULLY BRICKED.
I took it to T-Mobile and said I did an update and this is what happened and they gave me a brand spanking new one! =D
Thanks for all your help though.
Click to expand...
Click to collapse
Pathetic, take some responsibility. Thanks for supporting a future of locked phones.

Bricked SGS2? Thank you samsung...

I'm a brand new owner of a SGS2... So i installed kies tonight... and WAHEY! it told me there was a firmware update... I update as it tells me and it gets stuck for about 30 minutes... at this point i don't know WHAT to do and unplug it... there it is bent beyond recognition. nothing will work. I tried using ODIN to reflash it, tried reflashing the kernel but everything gets stuck and it won't budge... Have i bricked my sgs2 after only 3 days of usage? should i bring it back to samsung? someone please help me cos i'm pretty desperate...
Riqz said:
I'm a brand new owner of a SGS2... So i installed kies tonight... and WAHEY! it told me there was a firmware update... I update as it tells me and it gets stuck for about 30 minutes... at this point i don't know WHAT to do and unplug it... there it is bent beyond recognition. nothing will work. I tried using ODIN to reflash it, tried reflashing the kernel but everything gets stuck and it won't budge... Have i bricked my sgs2 after only 3 days of usage? should i bring it back to samsung? someone please help me cos i'm pretty desperate...
Click to expand...
Click to collapse
Kies is the devil mate, samsung has made a brick machine here... I only ever use Odin and NOTHING else!!!
If it turns on its not bricked, the only way to possibly rectify this is to actually use kies again;( Try using the emergency recovery flash, if this fails it looks like its an RMA;(((
KIES IS JUST DOWNRIGHT DANGEROUS!
What do you mean by RMA? Kies fails to find any device under emergency recovery... Odin has only gone as far as Factoryfs.img. That's as far as it's ever gone. usually gets stuck at cache,img. really desperate here and not going to sleep...
Riqz said:
What do you mean by RMA? Kies fails to find any device under emergency recovery... Odin has only gone as far as Factoryfs.img. That's as far as it's ever gone. usually gets stuck at cache,img. really desperate here and not going to sleep...
Click to expand...
Click to collapse
RMA is a return to samsung....
OK it seems like something in your phone had become corrupted by the rouge kies flash, if odin cant flash a new rom, it looks like you could have a big problem...;((
fantastic... man i was so happy... And to think it was an official APP doing an OFFICIAL update... How could they f this up any worse...
Riqz said:
fantastic... man i was so happy... And to think it was an official APP doing an OFFICIAL update... How could they f this up any worse...
Click to expand...
Click to collapse
Well if you can get into download mode, not to fret. When you try and flash through ODIN, if it fails even once you will need to shut down the phone by pressing power button. Then unplug the usb cable, go into download mode and try again. I used to have the problem with my captivate - if it fails once, you need to restart into download mode again otherwise it will keep failing and failing. Most likely not an RMA - I have done this many times. Not on my SGS2 yet but previous sammy phones
If you still have problems, try another USB slot. Then try another PC if absolutely necessary.
blue265 said:
Well if you can get into download mode, not to fret. When you try and flash through ODIN, if it fails even once you will need to shut down the phone by pressing power button. Then unplug the usb cable, go into download mode and try again. I used to have the problem with my captivate - if it fails once, you need to restart into download mode again otherwise it will keep failing and failing. Most likely not an RMA - I have done this many times. Not on my SGS2 yet but previous sammy phones
If you still have problems, try another USB slot. Then try another PC if absolutely necessary.
Click to expand...
Click to collapse
I could kiss you in the mouth right now... It's booting up. i changed USB slot and took out battery etc... Still waiting.... AND OH MY GOD:....
I DIDNT EVEN LOSE MY APPS OR ANYTHING.... jesus... thanks guys... i love you so much. WoW:.. i really can't express my love for both of you two tonight... i feel like crying now...
Riqz said:
I could kiss you in the mouth right now... It's booting up. i changed USB slot and took out battery etc... Still waiting.... AND OH MY GOD:....
I DIDNT EVEN LOSE MY APPS OR ANYTHING.... jesus... thanks guys... i love you so much. WoW:.. i really can't express my love for both of you two tonight... i feel like crying now...
Click to expand...
Click to collapse
No problem mate,
Our community is always here to help if we can Im glad your phone is restored to its brilliance
Haha, good you sorted it out
Now that's genuine gratitude there!
Joe
If i could hug you all i would i swear. I think i'm going to hang around here more often than i would have if nothing happened. You guys deserve me lurking around more ehehe.
God i feel so relieved... thanks so much again.
Yeah no problem mate. I am not going to say its impossible, but bricking an SGS2 can be fairly difficult. I just wanted to share what I learned about 6 months ago when I thought I bricked my Captivate I kept trying to flash while still in download mode when it just needed to be reset
Oh and my very first post on XDA was the same relief when I found a post that showed me how to fix. lol
Have you tried to update to the new FW update that KIES gave you, again and seen success?
kotaro_14 said:
Have you tried to update to the new FW update that KIES gave you, again and seen success?
Click to expand...
Click to collapse
I think i'm going to leave kies sitting there for a while now until the initial impact of my phone dying is gone.
Also...by using Odin i think i've updated to the latest version.
Do You Have An SGS2 On Rogers
blue265 said:
Well if you can get into download mode, not to fret. When you try and flash through ODIN, if it fails even once you will need to shut down the phone by pressing power button. Then unplug the usb cable, go into download mode and try again. I used to have the problem with my captivate - if it fails once, you need to restart into download mode again otherwise it will keep failing and failing. Most likely not an RMA - I have done this many times. Not on my SGS2 yet but previous sammy phones
If you still have problems, try another USB slot. Then try another PC if absolutely necessary.
Click to expand...
Click to collapse
Do You Have A SGS2 On Rogers That Works With No Problems ? Where Did You Buy It An How Much Did It Cost As I Want To Buy One
Daxomega007 said:
Do You Have A SGS2 On Rogers That Works With No Problems ? Where Did You Buy It An How Much Did It Cost As I Want To Buy One
Click to expand...
Click to collapse
Yes the sgs2 works perfectly on the Rogers network. I didn't even have to enter APN settings and hspa+ works too. I bought mine from expansys.ca and altogether was around 800 with taxes and shipping. However I think handtec in the UK is cheaper now. You may have to pay duties but should still be cheaper
Sent from my GT-I9100 using XDA App
Congrats friend...welcome back...do rock and roll with SG2
Riqz said:
I'm a brand new owner of a SGS2... So i installed kies tonight... and WAHEY! it told me there was a firmware update... I update as it tells me and it gets stuck for about 30 minutes... at this point i don't know WHAT to do and unplug it... there it is bent beyond recognition. nothing will work. I tried using ODIN to reflash it, tried reflashing the kernel but everything gets stuck and it won't budge... Have i bricked my sgs2 after only 3 days of usage? should i bring it back to samsung? someone please help me cos i'm pretty desperate...
Click to expand...
Click to collapse
i have same problem...
try to change ID:COM .. problem solved

[Q] Is That a Hard Brick?

Hello.
Lets make it quick.
I always used odin to flash FW's via the PDA option.
But then i found a "I9100XXLP2_I9100OXALP2_OXA" (an ICS rom, yes ) on www.sammobile.com.
Downloaded the FW and what was new for me it was in few separate files.
- GT-I9100-MULTI-CSC-OXALP2.tar
- I9100_CODE_I9100XXLP2_CL57619_REV02_user_low_ship.tar
- MODEM_I9100XXLP1_REV_02_CL1095381.tar
Since i didnt knew what to do with these exactly i've got a guide from sammobile.com as well.
like this:
http://s7.postimage.org/586eickij/tutorial.png
So i placed my files, the same
(yes i know theres no that "yellow" thingy in the first bracket)
http://s11.postimage.org/6x732wx9f/odin.jpg
pressed START and odin began to repartition.
The weird thing it took over 20mins and still nothing was going on.
so i searched about it and found this:
http://forum.xda-developers.com/showthread.php?t=1119580
i did it. and now my phone won't even react.. black screen. cant enter download mode, nor recovery.
is it the end?
Probably. No download mode & I presume Odin doesn't recognise the phone when you hook it up to a PC ? Might as well try a jig but I'd be surprised if it worked.
Back to Samsung or a 3rd party JTAG repairer.
Is that an I9000 .pit in the screenshot? Looks like you've hosed your device with the wrong partition layout.
MistahBungle said:
Probably. No download mode & I presume Odin doesn't recognise the phone when you hook it up to a PC ? Might as well try a jig but I'd be surprised if it worked.
Click to expand...
Click to collapse
True...so true... PC doesn't even try to find it.
oinkylicious said:
Is that an I9000 .pit in the screenshot? Looks like you've hosed your device with the wrong partition layout.
Click to expand...
Click to collapse
Ah hell!
i've got the file from user of pdaclub, he was saying it was the right one.
now when i googled it... you're right... its i9000 pit...
tsk... ordered the jig, so i may try to revive it. If not...
hello samsung, for how much would you repair my phones? pretty please?
oxoconstantineoxo said:
True...so true... PC doesn't even try to find it.
Ah hell!
i've got the file from user of pdaclub, he was saying it was the right one.
now when i googled it... you're right... its i9000 pit...
tsk... ordered the jig, so i may try to revive it. If not...
hello samsung, for how much would you repair my phones? pretty please?
Click to expand...
Click to collapse
I'm sorry to say, but the phone is completely dead... The repartition tables are not your device's tables, so it's "safe" to say that your phone is an expensive paperweight...
oxoconstantineoxo said:
Hello.
Lets make it quick.
I always used odin to flash FW's via the PDA option.
But then i found a "I9100XXLP2_I9100OXALP2_OXA" (an ICS rom, yes ) on www.sammobile.com.
Downloaded the FW and what was new for me it was in few separate files.
- GT-I9100-MULTI-CSC-OXALP2.tar
- I9100_CODE_I9100XXLP2_CL57619_REV02_user_low_ship.tar
- MODEM_I9100XXLP1_REV_02_CL1095381.tar
Since i didnt knew what to do with these exactly i've got a guide from sammobile.com as well.
like this:
http://s7.postimage.org/586eickij/tutorial.png
So i placed my files, the same
(yes i know theres no that "yellow" thingy in the first bracket)
http://s11.postimage.org/6x732wx9f/odin.jpg
pressed START and odin began to repartition.
The weird thing it took over 20mins and still nothing was going on.
so i searched about it and found this:
http://forum.xda-developers.com/showthread.php?t=1119580
i did it. and now my phone won't even react.. black screen. cant enter download mode, nor recovery.
is it the end?
Click to expand...
Click to collapse
That's not a I9100 .pit... u1_02_20110310_emmc_EXT4 THAT is a i9100 PIT...
Ring samsung up tell them you have flashed with kies it looked like it worked and restarted and phone hasnt turned back on, worth a shot i got away with it mines coming back fixed
Sent from my E15i using XDA App
E_Goldstein said:
Ring samsung up tell them you have flashed with kies it looked like it worked and restarted and phone hasnt turned back on, worth a shot i got away with it mines coming back fixed
Sent from my E15i using XDA App
Click to expand...
Click to collapse
That's not gonna work, unless the service center is on full on retard mode
Why I say that? Because when an update goes wrong, the worst that can happen is a soft brick, and a hard brick is only achievable by either messing up a botloader flash or a repartition flash...
Could you not get away with saying you had a power cut as you were flashing the update through kies or would that not do the same sort of damage?
Sent from my GT-I9100 using xda premium
Alright guys... a lil "thanks" lands on everyone of your accounts...
even if im not really happy with such answers..
shame, after 2 years of flashing stuff to end up like this, without any device like that.
duh should have stayed with HD2 . :|
thanks again.
What answers were you expecting ? Your phone's borked, there's no fix any of us can off you & there's nothing else to say about it.
J-Tag is only hope but thats expensive tools or you bring the s2 to service center that have a J-tag tools
if u thank me then i will thank you ( 이 승 기 )
bududroid said:
J-Tag is only hope but thats expensive tools or you bring the s2 to service center that have a J-tag tools
if u thank me then i will thank you ( 이 승 기 )
Click to expand...
Click to collapse
isnt http://mobiletechvideos the only place where u can get sgs2 unbricked?
Its not that expensive compared to how much i've payed for the device. but it will take me 2 months to save up that much lolz..
if i just had lied with parents still... *sigh*
thanks anyways again!
i think i've got my hopes back
Phistachio said:
That's not gonna work, unless the service center is on full on retard mode
Why I say that? Because when an update goes wrong, the worst that can happen is a soft brick, and a hard brick is only achievable by either messing up a botloader flash or a repartition flash...
Click to expand...
Click to collapse
WELL WELL the service centre i used is on full retard mode because I've just got away with it, so unless you tried
And I've seen a bunch of people on here over the last 4 mths who haven't 'got away' with it. Ergo, if you don't return the phone to stock firmware & reset the flash counter, you're taking pot luck basically.
E_Goldstein said:
WELL WELL the service centre i used is on full retard mode because I've just got away with it, so unless you tried
Click to expand...
Click to collapse
Just out of curiosity, if they did catch on to it, would you get the phone back?
Nice one OP! You got lucky ;-)
Sent from the future using xda ultimate edition.
Rizur said:
Just out of curiosity, if they did catch on to it, would you get the phone back?
Nice one OP! You got lucky ;-)
Sent from the future using xda ultimate edition.
Click to expand...
Click to collapse
Nothing illegal has been done so the worst they can do is refuse to repair it and charge a small fee to cover admin & courier to return it. I don't know about Samsung but for HTC thats about £30.
What they would probably do is say thay the warranty has been invalidated and give a quote to repair it. If you didn't want it repaired then they would return it on payment of the small fee mentioned above.
Crustyloaf said:
Nothing illegal has been done
Click to expand...
Click to collapse
Depends if the OP followed the advice of others to commit fraud (a common recommendation on this forum) .
ALRIGHT! My SGS2 just came home! Just like new one! Updated too!
So im recommending http://mobiletechvideos.mybigcommerce.com/ site to everyone who had bricked their phones!
It came back after 3 weeks, and the price was fair!
CHEERS! ^^
Congrats mate. SGSII is amazing.

HELP!!! hard bricked

i tried to flash a rom and when it finished it turned off and now it wont turn back on. i have tried going into recovery and going into download mode and nothing. do you think a usbjig will work? or can i return it and just say the phone wont power back on?
update: if i plug it in to my computer i can hear the notification my computer gives when i plug in a usb device but the tome is different. its like a deeper tone.
anyone?????
So, you can get into recovery or no? Maybe look here:
http://forum.xda-developers.com/showpost.php?p=27850974&postcount=7
zonly1 said:
So, you can get into recovery or no? Maybe look here:
http://forum.xda-developers.com/showpost.php?p=27850974&postcount=7
Click to expand...
Click to collapse
no. i cant get into recovery nor into download mode. the screen shows nothing at all and the phone doesnt vibrate. i did the tmobile chat and she said they might need to exchange it but would take 7-10 business days. i didnt tell her it was rooted tho. i was hoping the usb jig would unbrick it. i have an old usb from my other phone. i already cut it and stripped it but i need a 300k resistor and radioshack doesnt open in 1 more hour.
i just checked device manager and if i plug in my device it shows QHSUSB_DLOAD with a yellow exclamation.
update: i installed some drivers i found online and it now shows as Qualcomm HS-USB QDLoader 9008 (com7) in device manager but odin wont recognize it still
so after doing the live chat with samsung and they wanted me to send them my phone to check it out and i had to wait 6-10 business days i went to my local tmobile store the guy tried to turn it on tried charging it and said to go back on wednesday because thats when they get them. so i am stuck with a loner phone.
That's a bummer...just curious...what ROM were you trying to flash?
zonly1 said:
That's a bummer...just curious...what ROM were you trying to flash?
Click to expand...
Click to collapse
I didn't know there was roms to flash yet
Then how'd it get bricked?
Sent from my cm_tenderloin using Tapatalk 2
http://rootgalaxys3iii.com/root-at-t-galaxy-s3/
Fixboot.tar just in case anything screws up when rooting. Saved some people's lives. Odin if anything happens to phone
Sent from my cm_tenderloin using Tapatalk 2
Sent from my cm_tenderloin using Tapatalk 2
So how did u brick it?
worst case, take it back to tmobile tell them that it got really hot and turned off and wont power up. they wont check anything. just get a new one. and DONT FLASH ANYTHING UNTIL YOU READ UP ON IT! we are all using the Rooted stock rom. just chill out for now... ROMS WILL COME. this is the hottest phone on the market...
I thought Samsung phones were unbrickable. Is this sort of thing common or was it a bad unit?
fcortes626 said:
so after doing the live chat with samsung and they wanted me to send them my phone to check it out and i had to wait 6-10 business days i went to my local tmobile store the guy tried to turn it on tried charging it and said to go back on wednesday because thats when they get them. so i am stuck with a loner phone.
Click to expand...
Click to collapse
Use the jig. I made one with parts from Radio Shack and it works on the S3.
Sent from my SAMSUNG-SGH-I747 using xda premium
wiser212 said:
Use the jig. I made one with parts from Radio Shack and it works on the S3.
Sent from my SAMSUNG-SGH-I747 using xda premium
Click to expand...
Click to collapse
You are wrong in this case because he hard bricked it, which is why he only sees the QHUSB_DLOAD mode.
That requires special software in order to flash, and we don't get access to it.
Lantek23 said:
I didn't know there was roms to flash yet
Click to expand...
Click to collapse
there isnt
avataranjie said:
Then how'd it get bricked?
Click to expand...
Click to collapse
i tried the cm9 fro international and changed the buildprop and bootimg
avataranjie said:
http://rootgalaxys3iii.com/root-at-t-galaxy-s3/
Fixboot.tar just in case anything screws up when rooting. Saved some people's lives. Odin if anything happens to phone
Click to expand...
Click to collapse
odin wont find my phone
dasistsparta said:
So how did u brick it?
Click to expand...
Click to collapse
flashed an international rom
Radsolutionz said:
worst case, take it back to tmobile tell them that it got really hot and turned off and wont power up. they wont check anything. just get a new one. and DONT FLASH ANYTHING UNTIL YOU READ UP ON IT! we are all using the Rooted stock rom. just chill out for now... ROMS WILL COME. this is the hottest phone on the market...
Click to expand...
Click to collapse
yea i went yesterday and just said it wont turn on. he tried it and plugged it into the power outlet and nothing. he just said they dont get their shipments until wednesday(tomorrow) so i guess they will exchange it. good thing it was on warranty still. im guessing samsung wont be able to tell it was rooted since they cant access it and they will just reflash it and sell it as refurbished or something right?
wiser212 said:
Use the jig. I made one with parts from Radio Shack and it works on the S3.
Click to expand...
Click to collapse
i was going to try it but it didnt work out lol. all the pins fell. i also read it wont work with devices that have a blank screen
Hunt3r.j2 said:
You are wrong in this case because he hard bricked it, which is why he only sees the QHUSB_DLOAD mode.
That requires special software in order to flash, and we don't get access to it.
Click to expand...
Click to collapse
yup. i got qpst to see it but i dont know how to use that software so ill just wait until tomorrow. it was just some videos and pics i wanted to pull from the sd card. oh and i noticed the back cover was scratched so i want a new one lol. mus of happened when the tmobile guy got it out of the box and set it on the counter cuz i had a zagg cover all arround it. but oh well. i was the first to brick the s3 lol and that was the first phone i ever hard bricked. lesson learned haha
ECrispy said:
I thought Samsung phones were unbrickable. Is this sort of thing common or was it a bad unit?
Click to expand...
Click to collapse
An unbrickable phone does not exist. The closest to unbrickable as you can get is an iPhone. But it can be bricked if you try hard enough I'm sure. Strapping an m80 to my iPhone seemed to do the trick as well
Sent from my ADR6425LVW using Tapatalk 2
unbrickable phones do exist, almost all samsung galaxy phones are capable of getting the "unbrickable mod" which is a hardware modification that enables the phone to be re-flashed without working bootloaders. but unbrickable out of the box, no.
Evocm7 said:
An unbrickable phone does not exist. The closest to unbrickable as you can get is an iPhone. But it can be bricked if you try hard enough I'm sure. Strapping an m80 to my iPhone seemed to do the trick as well
Sent from my ADR6425LVW using Tapatalk 2
Click to expand...
Click to collapse
isnt the captivate unbrickable?
i read somewhere that there are some phones that boot from the sd card first and that those are unbrickable.
fcortes626 said:
isnt the captivate unbrickable?
i read somewhere that there are some phones that boot from the sd card first and that those are unbrickable.
Click to expand...
Click to collapse
I believe there are some that are very difficult to brick such as a setup that boots from sd like you mentioned. Regardless of how difficult it is to brick, there is always some idiot out there that will do the impossible
Sent from my ADR6425LVW using Tapatalk 2

Categories

Resources