Has anyone successfully connected your Prime to a PC yet. Having a very hard time making the PC see the device.. any suggestions.
Thanks
yeah no problem at all. Windows 7 PC.
i am a developer for my Galaxy S (ICS) so i have the most current android device drivers...there are also drivers online on the asus website
Thanks for all your work... yes I got those drivers and did the firmware update as Asus suggested but still can't see my Prime as a mass storage drive
louvass said:
Thanks for all your work... yes I got those drivers and did the firmware update as Asus suggested but still can't see my Prime as a mass storage drive
Click to expand...
Click to collapse
follow the instructions to get the latest revision of google drivers:
http://developer.android.com/sdk/win-usb.html
Thanks I went there and d/l the SDK but it says I need more, do you have just the driver file or link.. thank you so much
I even installed Asus Sync per Asus and it still dont see the device
Mine installed fine. You don't have to do anything on the tablet like you do with the phone. It just installed the drivers and showed up under my computer.
Sent from my HTC Vision using XDA App
Mine shows up as a media player, and allows me to drag/drop stuff to it. But it does not have a drive letter, which can be a problem with few things.
I am going nuts here. Asus sync is installed but not working. Although the Prime goes automatically to USB debugging mode and I see it on the win explorer, and transfer files, the Asus Sync utility tells me that there were no connection, and Prime cannot find Asus Sync on my PC.
Check your cable connector. When I first received mine and plugged it in (no drivers/software were necessary) it showed up right away as a portable storage device. When I went to unplug it, the plastic hosing came off. There was noticeable damage so I just put it back on, however, after that Prime connecting to the PC was a hit and miss. Plugging it in and unplugging, sometimes it would be seen sometimes it wouldn't. Asys sync never recognized the device successfully, period.
Related
Okay all. Usually I don't post and just lurk around here to find the answers to my issue. This time after reading 300 posts about Activesync and the TP my problem is still not resolved.
Up until last Friday I have been able to sync the TP with my computer running WinXP via the USB connection. I sync with my exchange server OTA but use the USB connection for file transfers. My computer won't recognize that the TP is even plugged into the USB now. It still charges, but doesn't do anything else. I've rebooted the machine and TP, reinstalled Activesync on computer, unchecked the "enable advanced network functionality" box, changed USB cords, verified that I have the correct three repllog.exe values in my notification queue, and even hard reset the TP. Still no luck. I would think that it's something to do with the computer except that I plugged my Mogul in to check and it synced instantly.
Does anyone have any more ideas why the TP would not be registering as connected? You all are amazing when it comes to stuff like this, so any help would be greatly appreciated.
Thanks in advance.
uninstall the Windows Mobile-based Device from the
network adapters section of Device manager on the PC.
control panel -> system -> hardware tab -> device manager button
restart pc and plug in the phone via usb and select active sync.
also the reason this may work in your case is i have had to do this for a friend.
windows installed the general rdnis driver however each device has a different
instance installed and thus the one device can have a corrupted driver yet the
other works perfect.
i see that u used another usb cable, cuz once it happened to me that the cable would charge but vista wouldn't recognize my TP "unrecognized USB device" , until i changed my usb cable!
Well I finally just went to a friend at the Sprint store and he swapped me for another TP. The new one works perfectly with the same setup that the other wouldn't. I can only guess that somehow the USB connection on my phone failed somehow. Just wanted to post this in case anyone else may have this issue in the future. Thanks for the responses.
This problem has happened on a friends, as well as just happening to mine (about 20 minutes ago). The usual fix which seems to clear it up:
1 - Hook up phone to computer
2 - On phone, start ICS (Internet Sharing in Start -> Programs)
3 - Select PC Connection "USB" and Network Connection of any type (if Sprint stock ROM, I recommend using "Sprint")
4 - Hit the "Connect" soft-key (bottom left)
If you've never used Internet Sharing on the phone, your computer should install some drivers... Once that is completed, click the Disconnect left soft-key on the phone. Now disconnect the cable from the computer.
Close out ICS or soft-reset the phone.
Once the phone is back up, plug it in - it should work.
I don't know what is getting reset in the phone, but unless I connect with ICS, then ActiveSync will not connect whether I soft-reset or not.
The same thing happened with my phone.... I took it to the Sprint store and they even tried a hard reset. It worked once after that then again it wouldn't sync. So they just replaced mine.... It was like you said.... some malfunction in the phone itself.
Hope HTC can figure out why this is happening.
Touch pro not sync
I can sync with my Vista Laptop and my friends xp machine but not to my xp desktop. I have tried many different cables. Each time I try something new, I toggle the "enable faster data synchronation box on USB to PC on try to sync then off then try to sync.
I have tried to delete all the usb drivers and rebooted to let the computer put in a new set.
I have tried to delete all the non running programs in my device manager using view hidden files.....
I have uninstalled active sync and then reinstalled it.
I have hard reset my phone a few times to no avail.
I went and bought a blue tooth adapter so I could sync using blue tooth and this computer does not do a good job of recognizing the adapter, but it did recognize it the first time but, could not pair the two. my blue tooth adapter is now coming up as a an unknown device
when i hook up the phone this is the message i get:
USB not Recognized,
One of the USB devices attached to this computer has malfunctioned, and windows does not recognize it. For assistance in solving this problem, click this message....
Any ideas?
Thanks,
Kent
MCW junior member THANKS....
thanks so much, this worked for me I could not sync my tasks or calendar, once I did what you said here I did get and Error Code 67..then cannot connect saying remote party has ended this connection...whatever that means...but anyway it proceeded to start automatically resynching and walla..all of sudden my tasks and calendar were on my computer ....first time I was ever on this forum ....I shall continue reading and learning here...so appreciate your help...I love my HTC Touch Pro and have just figured out how to connect to my big screen tv with only an MP3 or the like cable...works beautifully...except picture on tv is not the clearest...I will work on perfecting that next if it is possible...
Then I want to figure out how to get the phone connected to my computer screen, just like I did to my TV...then your phone acts as a controller...it's so cool!!
Michele S
Ok I just found a solution for this, at least under Vista.
Click Start > Settings > Connections (tab)
Choose USB to PC
Once I removed the check mark next to "Enable advanced Network functionality" and clicked OK, my PC immediately saw my TP.
Hope this helps someone.
so what does the faster syc option do?
Ok so I searched the internet and found the advice to turn off the faster sync option on the phone.
After trying everything else I figured what the heck..
So it worked.
(btw windows adds a dif driver rather then the window-mobile baised device driver... )
So what does this option do? What does it point to being the problem on the computer?
Thanks,
HA>!
dashrender said:
ok i just found a solution for this, at least under vista.
Click start > settings > connections (tab)
choose usb to pc
once i removed the check mark next to "enable advanced network functionality" and clicked ok, my pc immediately saw my tp.
Hope this helps someone.
Click to expand...
Click to collapse
yeah i was having the same problem...my cpu would just recognize my phone as a mass storage device... Read your solution. And it worked... Damn i feel like a moron should have checked. Thanks!
I am having the same problem except the enable advanced network functionality option is checked and grayed out so it can't be unchecked.
I am running a 6.5 rom...
Any suggestions?
Solution solved
If you go to Settings->Connections->USB to PC and uncheck Enable faster data synchronization.
You will notice below that it will say "(Clear this check box if ActiveSync does not recognize the device)"
Once I did this it worked perfect.
tjrmoney said:
If you go to Settings->Connections->USB to PC and uncheck Enable faster data synchronization.
You will notice below that it will say "(Clear this check box if ActiveSync does not recognize the device)"
Once I did this it worked perfect.
Click to expand...
Click to collapse
Think of this step as telling your tp to quick boot/sync if nothing between the device and the reciving pc has changed (ie: hardware, software etc.
Enables faster syncing and quicker connection and authentication between pc and WM device. Reason for unchecking this to make it work?, by hard-reseting or changing specfic phone information you've reset specfic settings that are registerd with your pc.
i was having this problem with my sprint tp2 and tried it and worked. wish i would of learned if before reseting my computer and losing some windows i had open and the hard reset on my phone and losing all my contacts now i gotta go back to sprint store to get them again.
Works on the Touch2
I had this problem, which was driving me nuts especially as it was intermittent. I found Dashrender's advice and followed it except for turning off "Enable faster data synchronisation". Brilliant, works perfectly, thanks.
But what are HTC doing putting something in the software that fouls things up?
I knew i wasnt loosing my mind!
I have been workn on phones for a while. And have just been freakn about these same Issues Sony vio with 64bit vista. Thanks for all the tips. only took 6 hrs of pain to figure it out myself.
I have a similar problem now with my USB to PC . i have used this usb cable for many flashes but now when I plug it in, my computer doesnt recognize the usb device. also TV-Out pops up on my phone too. what is that all about? i dunno what to do
just found this thread searching for why my tp2 wouldn't sync. somehow under usb to pc i had it set to disk drive instead of active sync. checked it and works like a charm, can even see it in my computer now.
Samsung fascinate
rooted
windows 7 with Samsung 64 bit drivers installed
back to stock DL01 and then OTA DL09 about five times today.
Here is the problem, when i mount my phone, intermittantly Windows 7 doesnt give me the pop up window that lets me view my sd card files. It gives me a pop up window with 2 choices:
Option # 1. View your files - this really doesnt let me view anything except 4 files one of them being a " Bootloader file "
Option # 2. Install Bootstrap Loader exe.
I have had my phone since september and rooted, rom"ed OTA"ed all of it and today this started happening.
When i look in Drives and Printers my phone is listed as a CD Drive and not a Mass Storage Drive.
Just curious if any one else has had this issue and what might have caused it to start happening.
I installed Samsung Kies earlier this afternoon but uninstalled it since it was pretty much worthless to fascinate owners and the U.S. isnt supported.
Any input would be appreciated. Thanks in advanced for any info.
have you tried re downloading the drivers from samsung.com? it worked for me.
This has been talked about in several places already. It is a common bug with DL09. The best solution is to flash one of adrynalyne's 1/18 test kernels found here. I hope this helps!
BTW: make sure it is one of the kernels with the cd fix
when im on 2.1 aosp, i have that same issue, to fix reboot with debugging enabled
Seems to be related to some new 'Media sync' option.
I did some playing around and the following seemed to let me 'mount'
the phones as before. ( But I dont like it. )
Hoping for some direction from Verizon tech on
a) what is media sync ?
b) how do I turn off permanently If I dont need or want to use it?
Unplug phone from usb cable.
Then on Phone... Menu...Settings..USB settings
Change to ' Ask on connection'.
then press home button.
Plug in USB cable.
When prompted...Press 'Mass storage'.
Now wait...wait..wait. Took about 30 to 45 seconds.
Annunciator bar should have usb symbol. Drag it open.
Press usb connected....Press Mount..
My laptop now recognized the SD card on E drive.
Copy files as usual.
When done...Open Anunciator bar and 'Turn Off' USB storage.
Media Sync is a mode that allows programs such as Windows Media Player and Rhapsody to access your SD card and copy over DRM protected music.
Sent from my Samsung Fascinate
Thanks for this, it worked
not sure if it helps with the problems with 2.2 but whenever i had this issue on 2.1 this is what i did, turn off your phone with the usb cable in and turn it back on with the phone still plugged in. It always seemed to work for me
From your homescreen when you hit menu go to usb settings then make sure the little radio button for mass storage device is selected. That was my problem after the latest OTA from verizon. Also it takes like 15 seconds for it to all sync up.
i have searched these forums hi and low, googled, etc. still cant find an answer....
on djo5,dl09 i was able to plug my phone into the usb port in my car, then mount my sd card, and it would automatically connect and find my music and start playing it.
on either dl30, or eb01, i cannot get it to work.
it is very frustrating. everytime i try, (all different combinations debugging on/off mass storage/ ask on connect, etc.)
i get a "device connect failed" message.
does anyone else have this issue?
has anyone been able to get this to work?
Another fix when it shows up as a CD-ROM drive is to right click and eject. Seems to work every time for me.
Sent from my SCH-I500 using XDA App
zparlet said:
not sure if it helps with the problems with 2.2 but whenever i had this issue on 2.1 this is what i did, turn off your phone with the usb cable in and turn it back on with the phone still plugged in. It always seemed to work for me
Click to expand...
Click to collapse
Thanks your idea of reboot while still plugged in saved me. Tried every other idea with no cure.
Thanks for the post.
Just installed Superclean 2.6 and had issues. I tried ejecting the CD Rom device in Windows, but that didn't work. I changed the usb settings from Mass Storage to Ask On Connection and then tried it again. This time I received the Android guy asking to mount the drive. Yay! It worked! It does however show both a CD rom drive and the mass storage drive in Windows XP.
On another note, I found that if I plug in my phone without unlocking the password first it locks up the phone until I unplug the usb cable attached to the pc.
Make sure you are using a USB cable that has a good connection (like the original one). I bought some aftermarket cables, and while they are good enough for charging, I really think they fit too loose to keep a secure connection.
apnews said:
Seems to be related to some new 'Media sync' option.
I did some playing around and the following seemed to let me 'mount'
the phones as before. ( But I dont like it. )
Hoping for some direction from Verizon tech on
a) what is media sync ?
b) how do I turn off permanently If I dont need or want to use it?
Unplug phone from usb cable.
Then on Phone... Menu...Settings..USB settings
Change to ' Ask on connection'.
then press home button.
Plug in USB cable.
When prompted...Press 'Mass storage'.
Now wait...wait..wait. Took about 30 to 45 seconds.
Annunciator bar should have usb symbol. Drag it open.
Press usb connected....Press Mount..
My laptop now recognized the SD card on E drive.
Copy files as usual.
When done...Open Anunciator bar and 'Turn Off' USB storage.
Click to expand...
Click to collapse
4GivenByChrist said:
Another fix when it shows up as a CD-ROM drive is to right click and eject. Seems to work every time for me.
Sent from my SCH-I500 using XDA App
Click to expand...
Click to collapse
Thanks guys, this combination worked perfectly for me.
Just fyi, this is due to Verizon bloatware that has been inserted I to the kernel. Adrynalyne and company managed to flush it out of the Eclair kernel, but since we don't have kernel source code for the Froyo kernel yet, there's nothing that can be done at this time. When source is available, this will be fixed by our devs.
Sent from XDA Premium on my Super Clean Fascinate
Sorry but, believe me, I've been dealing with this all week and I have read every post possibly pertaining to this subject, but I can't find a fix.
Went to flash the latest Bionix and PC (Windows XP-32/64-Bit HP) won't recognize my Vibrant. It's the only machine I've ever used with this phone. I plug in and get the USB icon and the Android Debug icon in the menu bar. Pull it down and it says "USB Debugging Connected" & "USB Connected". I can "Connect USB Storage" if I like, and it says "connected", but it's never recognized by the PC no matter what.
I can go into "Media Player" mode and "KIES" and same thing, it's just the USB icon instead of the Green Android. I've changed cords. I've used all the ports, front & back. Flashed back to Nero-5. I've gone into download mode and ODIN doesn't pick it up either.
32-Bit drivers are updated, but I've been doing a lot of install/reinstalls. The last thing I did on this device was flash Bionix-V. A couple weeks later I updated my wife's stock Vibrant via KIES.
What the hell can I do now? Thanks
edit...nevermind, sorry...at least i bumped you!!
Ha! Thanks TS10. And Mounting was certainly part of the problem. I could connect the USB storage and, in fact, it would say “connect” on the phone (“You can now transfer files between your SD card and PC” or something close to that), but it would still not show up on the PC. That’s what was driving me CRAZY.
But get this… Late last night, out of total frustration, I plugged the cable into a USB hub, that was connected to a removable HDD, and suddenly the Vibrant was recognized. I couldn’t believe it. I had plugged directly into that same USB port, on the back of the machine, at least 6x. Why the hell would it connect through a USB hub?!
I have no friggin’ explanation. But I’m running the latest Bionix now! At least I though that until I just check in here.
Delete
Are you getting "usb device not recognized" from your computer?
You've installed the samsung drivers?
Was it working at a given point in time and now it doesn't work all of a sudden?
I had a similar issue this week where i got "usb device not recognized" from my computer everytime i plugged in the device. I thought i had not installed the samsung mobile drivers properly, or my usb drivers on my PC was messed up, etc etc.
It turned out that my USB charging cable was the issue. It charged my phone fine but did not let me connect it to Odin or even transfer files.
So my suggestion is to try to find someone else's cable and give it a shot.
I used an AT&T captivate cable from a coworker and that's how i found out it was my cable.
Delete
where do i go to uninstall? i have a vibrant and stared getting this issue today
Alanrocks15 said:
where do i go to uninstall? i have a vibrant and stared getting this issue today
Click to expand...
Click to collapse
from desktop, windows button, in search box just above button type device manager, should be at the top of the windows pop up, clock that, go down to usb controllers, click the plus sign box. the rest was explained above.
USB fix
So I had the same problem. A new oem cable solved it. don't fight too long with this problem just get a new cable.
I just got the G3 last weekend and I'm really frustrated trying to connect it to my Win7 laptop. The phone charges but I don't get any sort of popup to mount the SD card so I can transfer files back and forth.
I have MTP enabled and I even went to the Windows website and installed the MTP drivers but I still can't get my computer to recognize it. Google searches have turned up nothing helpful. What am I missing?
EDIT: Never mind. I figured it out. Apparently my phone prefers one USB port over another.