Related
Hello Everybody,
I and looking for a silcone case that i can keep on the tablet when i put it in the keybozrd docking station. Does any one know of any that will work?
Thanks,
Sent from my Transformer TF101 using xda premium
yasirfaheem said:
Hello Everybody,
I and looking for a silcone case that i can keep on the tablet when i put it in the keybozrd docking station. Does any one know of any that will work?
Thanks,
Sent from my Transformer TF101 using xda premium
Click to expand...
Click to collapse
Me too .....
Sent from my Transformer TF101 using Tapatalk
While this isn't silicone, it may be what you are looking for. I am to interested in being able to hold both.
http://tuff-luv.com/faux-leather-bo...ablet-black.html?source=webgains&siteid=54264
yasirfaheem said:
Hello Everybody,
I and looking for a silcone case that i can keep on the tablet when i put it in the keybozrd docking station. Does any one know of any that will work?
Thanks,
Sent from my Transformer TF101 using xda premium
Click to expand...
Click to collapse
I do not know of any silicone cases that can remain totally in position when the tablet is attached to the docking station HOWEVER you can just release the silicone case from the bottom of the tablet and it then fits easily into the dock BUT remember that whilst on the dock the case is bent up at the back of the tablet a little.
yasirfaheem said:
Hello Everybody,
I and looking for a silcone case that i can keep on the tablet when i put it in the keybozrd docking station. Does any one know of any that will work?
Thanks,
Sent from my Transformer TF101 using xda premium
Click to expand...
Click to collapse
You mean like this? Look at pictures.
Arobase40 said:
I'm not quite sure if I understand the pictures well and how this really works ?
Is the Dock also protected by a silicone case or only the Tablet ?
Is it possible to have a retailer link or the manufacturer link for this product to have additional pictures, details and price ?
Thx
Click to expand...
Click to collapse
There's another piece for the dock. I didn't have it on, though. In fact, I just took the silicone off and put on carbon fiber skin. The silicone added probably 50 pounds to the overall weight.
It's the following skin.
http://www.overstock.com/Electronic...Soft-Gel-Case/6434147/product.html?cid=123620
Just measure very carefully and very very carefully cut out the bottom. Just use your imagination. Look at my pictures again. See how everything fits?
Arobase40 said:
Hmmm, I exercised my imagination pretty hard but couldn't find out the dock piece nor how the silicone gel skin can add "50 POUNDS" (22.68 kg) to the overall weight.
I was also searching on eBay, but couldn't find anything close to the product described on the OP...
The intention was good anyway.
Click to expand...
Click to collapse
You have a pretty crappy imagination
I think he used 2 modified skins from his link and modified both to fit the hinge and dock.
Also it looks like a decimal was misplaced lol. .50 lbs I could see.
Sent from my MB860 using Tapatalk
Spoontain said:
Also it looks like a decimal was misplaced lol. .50 lbs I could see.
Sent from my MB860 using Tapatalk
Click to expand...
Click to collapse
Ever heard of an exaggeration to make a point?
It was more at the other guy saying he couldn't see how it could add 50lbs, but good on ya
Sent from my MB860 using Tapatalk
Since I already have a BT Keyboard and mouse, and they work great with the TP I couldn't justify the $150 for the dock, but at the same time I really wanted a stand that would let me have the tablet plugged in to the cord and standing up. I just picked up the Griffin Tablet Stand for iPad +other tablets at Walmart and it is fits perfectly. The stand is designed just right to prop up the tab and the slot for the charging/usb cable is a perfect fit.
Good deal for $25
I use the Satechi R1
I use one of these (when not using my keyboard dock)
http://www.padpivot.com/
I got one of these as part of the Kickstarter project for this product, and it is incredibly rugged, incredibly versatile, portable and works with practically any flat device including the TF Prime.
I used this with my iPad1 and now use it with my Prime.
http://www.amazon.com/gp/product/B000CKVOOY/ref=oh_o06_s00_i00_details
nyijedi said:
I used this with my iPad1 and now use it with my Prime.
http://www.amazon.com/gp/product/B000CKVOOY/ref=oh_o06_s00_i00_details
Click to expand...
Click to collapse
Does that give enough clearance for the charging cable when in landscape?
I use
http://www.officedepot.com/a/products/286107/Cyber-Acoustics-Universal-Tablet-Stand/
Got it for $30 instore yesterday. Works pretty awesome.
Sent from my DROID RAZR using Tapatalk
Yup. Because It's fully adjustable in a number of directions, it works fine in both portrait and landscape.
Sent from my Transformer Prime TF201 using Tapatalk
Got this for $15 and have to say it is perfect!
http://www.bluelounge.com/products/nest/
Have a dual screen setup running off of a laptop at work, so I put this on top of my closed laptop, and it provides perfect positioning.
Also has the ability to stand the tab up like a normal stand, for $15 can't beat it!
Sent from my Transformer Prime TF201 using xda premium
I use a bible stand. The only thing bible superstores are useful for. I've been using them for laptops too for years.
Sent from my HTC Sensation 4G using XDA App
kborer22 said:
Got this for $15 and have to say it is perfect!
http://www.bluelounge.com/products/nest/
Have a dual screen setup running off of a laptop at work, so I put this on top of my closed laptop, and it provides perfect positioning.
Also has the ability to stand the tab up like a normal stand, for $15 can't beat it!
Sent from my Transformer Prime TF201 using xda premium
Click to expand...
Click to collapse
Those things look awesome
I just made this in a few mins using a 4 inch pvc pipe, it works, and i can still charge my prime while using it which is nice
LocknLoad,
The Satechi stand looks nice, but slightly pricey. From what I can say it does look nicely made and sturdy though. Does it travel well?
I kind of like the appearance of the Griffin Xpo, but haven't heard much about anyone using it.
Cheeers,
Sent from my Transformer Prime TF201 using Tapatalk
They r on the website for preorder! But another website is taking preorder for 39.99 instead of 59.99. But I'm just finally relieved they r here!
Sent from my SAMSUNG-SGH-I717 using XDA
The case on the website says its for the SAM2-N7000 I hope it will work for the I717 also.
Anyone get one yet?
Sent from my SAMSUNG-SGH-I717 using XDA
I just noticed that amazon has the commuter case for galaxy note.
JudgeDredd67 said:
The case on the website says its for the SAM2-N7000 I hope it will work for the I717 also.
Click to expand...
Click to collapse
The pictures on Otterbox.com show a solid screen protector so my guess is it will run double duty for AT&T and international
Sent from my SAMSUNG-SGH-I717 using XDA
pics?
Pics?
If you want to pics of the case, why don't you simply go to Otterbox.com?
Commuter case is for sale now at Otterbox.com
Sent from my SAMSUNG-SGH-I717 using XDA
Cubbump1 said:
If you want to pics of the case, why don't you simply go to Otterbox.com?
Click to expand...
Click to collapse
lol
i wanna know why questions keep disappearing from otterbox.... on the defender case page someone asked will it fit the i717 it was deleted wtf?
edit: and now its back maybe it was a glitch or something
Sent from my SAMSUNG-SGH-I717 using xda premium
kornklown69 said:
i wanna know why questions keep disappearing from otterbox.... on the defender case page someone asked will it fit the i717 it was deleted wtf?
edit: and now its back maybe it was a glitch or something
Sent from my SAMSUNG-SGH-I717 using xda premium
Click to expand...
Click to collapse
The design of the screen protector leads me to believe it's for both. Plus the commuter's page says it's for both. After reading the cases dimensions though, I'm waiting to try one in person before buying. I'm not sure if I can fit it in my pocket, it will add around 1/2 -1 inch both height wise and length wise
Sent from my SAMSUNG-SGH-I717 using XDA
VonEsch said:
The design of the screen protector leads me to believe it's for both. Plus the commuter's page says it's for both. After reading the cases dimensions though, I'm waiting to try one in person before buying. I'm not sure if I can fit it in my pocket, it will add around 1/2 -1 inch both height wise and length wise
Sent from my SAMSUNG-SGH-I717 using XDA
Click to expand...
Click to collapse
ill mostly use it with the clip most likely so i dont mind so much
Sent from my SAMSUNG-SGH-I717 using xda premium
I tried checking a few places and haven't seen anything. I'd prefer a bumper case so I can preserve the beauty of the back of the phone. What are our chances of getting some?
Sent from my LG-E970 using xda app-developers app
Att store or website.
Sent from my LG-E970 using xda app-developers app
iiDeadSeriousii said:
I tried checking a few places and haven't seen anything. I'd prefer a bumper case so I can preserve the beauty of the back of the phone. What are our chances of getting some?
Sent from my LG-E970 using xda app-developers app
Click to expand...
Click to collapse
http://www.att.com/shop/wireless/accessories/cases/sku6280561.html#fbid=d7GQALvwz_j
Here is one; It's really expensive for what it is. Hopefully some cheaper ones will pop up on amazon soon.
Yea, that's unnecessarily expensive. Do these cases cover the LED light on the power button?
Sent from my LG-E970 using xda app-developers app
Bumper case with a glass-back phone..
Why not just get one with a handle across the top, they you could actually use it as a curling rock.
I'm totally with you on the bumper case. Want want WANT. I've also seen some cases that are silicone with a clear plastic backing... might do in a pinch. Still much prefer a bumper (that's not $35... yeesh).
I have Belkin Bumper and I'm happy with it.. The only Con I have is the Headphone Jack/Port.. I have the Cassette Adapter in my car and it does not fit as the hole on the top is small. For that reason I might want to sell this case. If I can and get a new simple one.
---------- Post added at 06:44 PM ---------- Previous post was at 06:42 PM ----------
iiDeadSeriousii said:
Yea, that's unnecessarily expensive. Do these cases cover the LED light on the power button?
Sent from my LG-E970 using xda app-developers app
Click to expand...
Click to collapse
Yes they cover the LED. (As its 2 layer case)
I hate the bumper case. So ugly and bulky. You can remove the rubber part from the outer shell and that's the size I wish it was. But you can't use it that way since it is loose and looks unfinished.
Sent from my LG-E970 using Tapatalk 2
I agree that the bumper is too expensive for what it is. I spent $35 on a bumper I used for 3 days, and stopped because it was much bulkier than it needed to be and ugly to boot. My LG's naked now and I feel fine.
Sent from my LG-E970 using XDA Premium HD app
No case, I just pray to sweet lord baby Jesus that my phone won't brake
Sent from my LG-E970 using xda app-developers app
toddthetoad said:
http://www.att.com/shop/wireless/accessories/cases/sku6280561.html#fbid=d7GQALvwz_j
Here is one; It's really expensive for what it is. Hopefully some cheaper ones will pop up on amazon soon.
Click to expand...
Click to collapse
But you get free shipping. LOL
Sent from my LG-E970 using Tapatalk 2
I found this bumper for the E971 on a Canadian retailer's website. Seems like the E971 and the At&t E970 are the same size so it should fit:
gocellular.ca/?item=lg3005 (new member so wont let me post direct link)
Part number for this is CCH180AGCABK and seems to be manufactured directly by LG. Looks much slimmer than the Belkin version.
According to Rogers website, it's the same size as the 973, not 970
CattleRancher said:
According to Rogers website, it's the same size as the 973, not 970
Click to expand...
Click to collapse
Yep your right wasn't paying close enough attention, site I was using to compare sizes showed the E970 at 5.15 x 2.82 x 0.33 (131 x 72 x 8 mm) and the E971 at 131.9 x 68.9 x 8.5 mm (5.15 X 2.82. X 0.33). I looked at it in inches got excited and then failed to see that it is actually a different size.
lady at puremobile.com said this was for the AT&T version and would not fit the Sprint version. I ordered it via Amazon...we'll see.
LG Mobile CCH180AGCABK Bumper Optimus G Black
http://www.puremobile.com/lg-mobile-cch180agcabk-bumper-optimus-g-black
edit: just got the case...it does not fit. it's just a smidgen too narrow for the phone.
this is my main gripe with LG at the moment...to sell a device under one name yet with multiple sizes. that was stoopid.
DraginMagik said:
lady at puremobile.com said this was for the AT&T version and would not fit the Sprint version. I ordered it via Amazon...we'll see.
LG Mobile CCH180AGCABK Bumper Optimus G Black
http://www.puremobile.com/lg-mobile-cch180agcabk-bumper-optimus-g-black
Click to expand...
Click to collapse
Nice find! I hope it fits. Just ordered one as well.
Sent from my LG-E970 using Tapatalk 2
Keep us posted guys. The Belkin bumper from AT&T is decent but the ports are too small and you can't plug in the usb cable at the bottom to charge it.
DraginMagik said:
lady at puremobile.com said this was for the AT&T version and would not fit the Sprint version. I ordered it via Amazon...we'll see.
LG Mobile CCH180AGCABK Bumper Optimus G Black
http://www.puremobile.com/lg-mobile-cch180agcabk-bumper-optimus-g-black
Click to expand...
Click to collapse
That's much better looking than the Belkin bumper case. Definitely looking forward to your feedback.
Sent from my LG-E970 using xda premium
After looking at the picture it says 13.0 MP right next to the camera. If that's on the case, and not just Photoshop, then it most likely not for our phones.
Sent from my LG-E970 using xda premium
Joecascio2000 said:
After looking at the picture it says 13.0 MP right next to the camera. If that's on the case, and not just Photoshop, then it most likely not for our phones.
Sent from my LG-E970 using xda premium
Click to expand...
Click to collapse
I'm more concerned that it says LG on the back instead of the AT&T symbol.
Sent from my LG-E970 using Tapatalk 2
Hey Guys -
I know the wireless charging will work because of the Qi standard, but will the phone stay put? Any impressions from those who own it would be appreciated.
I could be wrong but I don't think its magnetic.. the back of the nexus is glass I think the orb is just a rubberized surface that "grab's" the back of the phone.. i.e. just friction holds it on... I think!
Sent from my HTC6435LVW using Tapatalk 2
Nobody has the orb yet, I think. It just now became available, with shipping withing a week. Plus the shipping time. I ordered one the first day it was available, but don't expect it before the end of next week.
Ok, they are shipping them today. Won't be long before we find out.
Sent from my HTC6435LVW using xda app-developers app
starscream86 said:
I could be wrong but I don't think its magnetic.. the back of the nexus is glass I think the orb is just a rubberized surface that "grab's" the back of the phone.. i.e. just friction holds it on... I think!
Sent from my HTC6435LVW using Tapatalk 2
Click to expand...
Click to collapse
I'm with you on this one, because I read it would be compatible with windows 8 and htc phones. And pictures look like the two circles on top are rubber. Just what it looks like to me
I have the touchstone charger and it has magnet in it.
from what I see it is held up 80% by friction, 20% by magnetic force.
Too bad the touchstone wont work on Droid DNA otherwise I think it would be a great charging dock.
Mine will be arriving tmrw (Friday)
sent from my Droid DNA
Here is a pic of the rear case of the nexus 4. I see no magnets.
Sent from my HTC6435LVW using xda premium
We'll know soon enough. The first ones arriving tomorrow. Today, in fact. Hope I won't have to return it.
Sent from my HTC6435LVW using xda app-developers app
cmay227 said:
Here is a pic of the rear case of the nexus 4. I see no magnets.
Sent from my HTC6435LVW using xda premium
Click to expand...
Click to collapse
I also see no inductive coils.... But they're there.
Sent from my HTC6435LVW using xda app-developers app
Magnet lightly holds. The surface of the orb is quite sticky and holds it just fine by itself - the magnet is obviously less apparent with a case on.
No case:
http://i.imgur.com/dXIyszGh.jpg
http://i.imgur.com/qHEeQmBh.jpg
With Diztronic TPU case:
http://i.imgur.com/wtnGcrdh.jpg
http://i.imgur.com/5qRZhYbh.jpg
Thing is pretty awesome.
---------- Post added at 11:14 AM ---------- Previous post was at 11:13 AM ----------
Definitely not strong enough to use as a car mount though.
beddachedda said:
Magnet lightly holds. The surface of the orb is quite sticky and holds it just fine by itself - the magnet is obviously less apparent with a case on.
[/COLOR]Definitely not strong enough to use as a car mount though.
Click to expand...
Click to collapse
Good to know.
Unfortunately, Play Store won't let me order one. My address is incorrectly input but I can't change it. Keep getting error messages.
Ty for the pics of this looks awesome will be ordering 1
sent from my beastly powered viper DNA using Tapatalk 2
Works like a charm! Together they're a thing of beauty.
So there is a magnet in it? I thought it would only be the anti-slip rubber that they try and sell for car dashboards. One question, does it work with the phone horizontal? That's something my Nokia DT-910 can't do.
Azbulldog said:
So there is a magnet in it? I thought it would only be the anti-slip rubber that they try and sell for car dashboards. One question, does it work with the phone horizontal? That's something my Nokia DT-910 can't do.
Click to expand...
Click to collapse
Yes there is a magnet, yes it works with the phone in landscape.
However, it doesn't activate DreamScene or whatever it does with the N4 (also doesn't flip home screens to landscape like it does in car mode).
beddachedda said:
Yes there is a magnet, yes it works with the phone in landscape.
However, it doesn't activate DreamScene or whatever it does with the N4 (also doesn't flip home screens to landscape like it does in car mode).
Click to expand...
Click to collapse
The dream mode is a 4.2 feature so I don't think anyone expected it to be on the DNA. And on stock there isn't landscape homedscreens. You'll either need a Rom or a 3rd party launcher for that.
Sent from my HTC6435LVW using xda app-developers app
Their are no magnets.
Sent from my Nexus 7 using xda premium
HTC Wireless charging unit
cmay227 said:
Their are no magnets.
Sent from my Nexus 7 using xda premium
Click to expand...
Click to collapse
is HTC planning to release its own Wireless charging device?
We will find out today
Sent from my HTC6435LVW using xda premium