Was wondering if anyone else has an issue with the tab staying in place? Bottom tab, same side as power button... little bugger keeps popping up. If I press it back in, it stays for a while but eventually pops back out, resulting in a bulge where the tab should be pressed in.
I know it's a minor annoyance but I'm wondering if my phone is warped, it's an issue with the cover itself, or if it's a common issue. I didn't find anything by searching. I know I can just throw a case on it and forget about it... *shrug*
No issues here. I only see the case pop up when I drop my phone. I'm glad the back isn't made of a breakable material, like glass, that would be a nightmare.
Sent from my Galaxy S II (i777)
quarlow said:
No issues here. I only see the case pop up when I drop my phone. I'm glad the back isn't made of a breakable material, like glass, that would be a nightmare.
Sent from my Galaxy S II (i777)
Click to expand...
Click to collapse
Thanks for the reply. I took pics... even though it's probably hard to see. Do the tabs look alright? I never really bothered looking at them before...
I don't know its hard to say with the pics. Here are some shots of mine.
Close up of bottom corner on side with cut out for back removal.
My whole back plate.
If it won't stay tight, I'd call att for a replacement.
Sent from my Galaxy S II (i777)
I wish I could. I got the phone from ebay It was fine for a couple days - or maybe I just didn't notice it. I have an extended battery & international battery cover on the way and will see if that works. Your battery cover seems like it has more of an L shape to the tab, the two where it pops up on mine look like they're almost straight.
More pics/better lighting...
(Tabs closest to keyboard)
Related
Anyone else having issues with loose buttons on the side? Specifically the camera button is loose on mine, and when I shake my phone (don't do it too often ;-) you can hear a rattle. Wondering if it's worthwhile to get it replaced or if this really is a larger 'issue' and considered normal.
I contacted Nokia, but did not receive a response yet.
I'd take it straight back to the shop and get a replacement.
rob_p said:
I'd take it straight back to the shop and get a replacement.
Click to expand...
Click to collapse
Yep, I'm going back anyhow - unfortunately they have no stock right now, but I already contacted them that I'm unhappy with this. Just not sure how they will respond when I'm actually physically there. Hopefully more info on that tomorrow.
I've been searching around and there appear to be numerous posts on the web of people with the same issue - so maybe it's "normal" or "within specifications".
Use rubber case
Hi,
I thought the same thing but that was before I fitted the rubber case. this rubber case isn't optional as it seems in the beginning. If you use the case everything fits snuggly.
I hope this solves your problem.
Greets
I had the same thing, took it back for a replacement.
Mine rattle slightly I wouldn't take it back because of it though. Your replacements... They don't rattle?
Sent from my Lumia 800 using XDA Windows Phone 7 App
deffo norattle at all on mine though the power button is uber sensative and i have turned my phone off by mistake a couple of times, for some reason i see something that says slide down and i just do it without thinking lol.
FYI - I just replaced my phone for a new one, this one doesn't have the issue I described!
i have it as well...
but i won my phone in a contest, pretty strange to ask for a replacement then
And i'm used to it now so not annoyed any longer.
I don't like the rubber skin for the phone, it makes the phone look fat
Hi,
Is anyone elses Prime have problems with creeky, lifting glass either to the right of the charger slot or the area with the volume adjuster? I don't want to send it to Asus to have it "Repaired" just for having creeky glass but I'm tempted (I can't send it back to Gamestop as I live in the UK). Do you think blasting it with a heat gun/Hair Dryer and pushing down on it will fix it?
Thanks, and nice forum .
ya I also have it next to the volume thing and near my camera I don't know if I should return it or send it to get repaired.
Not so far... Mine has no problems at all.
Was it this way when you received it?
Just noticed this yesterday to the right of the Volume control on mine. This is my second Prime as the first one had a faulty MicroSD slot but no other defects. I wonder if I can take it back to Gamestop (again) or will I have to deal with ASUS directly.
dmaple5495 said:
Not so far... Mine has no problems at all.
Was it this way when you received it?
Click to expand...
Click to collapse
It wasn't anywhere near as bad, at least not to the right of the charger slot. It is about a 2" by 1.5" rectangle that goes down by about 1 or 2mm when pushed down on it. I said if it gets any worse I'll send it to ASUS but I don't want to spend up to weeks without it because of this.
Do you reckon attempting to heat the adhesive with a hair dryer could cause damage to the screen/glass?
I have it too!
Just wanted to let you know that I also have the same issue. I noticed it first by the 2 inch section of bezel to the right of the dock arrow, and just noticed it by the volume keys after you pointed it out to me. I have pondered exchanging it with Best Buys, but I wondered if this was unreasonable. Any fixes or suggestions anybody? Thanks!
BrianMigs said:
Just wanted to let you know that I also have the same issue. I noticed it first by the 2 inch section of bezel to the right of the dock arrow, and just noticed it by the volume keys after you pointed it out to me. I have pondered exchanging it with Best Buys, but I wondered if this was unreasonable. Any fixes or suggestions anybody? Thanks!
Click to expand...
Click to collapse
I noticed it to the right of my charger port a week or so ago.
Makes a light creak noise when pushing on it. Not an area I really touch, but annoying all the same. Living in Australia, not going to RMA (yet at least), and can't send it back to B&H anyway.
Havn't noticed it get any worse.
How long would an RMA from Asus take? I would prefer to do an in-store exchange, but none of the Best Buys around me have Primes in stock. Also, what store is B&H? It doesn't sound familiar.
I thought it was only me having the problem to the right of the charger port. In this case it's probably a widespread issue that's due to there being no support underneath the glass.
I've go this problem too. Mine is right above the speaker and, to a lesser extent, above the volume rocker. The one above the speaker seems to be getting worse, probably because I can't stop myself from repeatedly pressing on the f***ing thing...
I also have some light bleed at the top of my screen, so what I'm going to do is wait until near the last day of Best Buy's extended Holiday return period (1/24) then go swap it out in-store. Hopefully by then they will have stock so I won't have to be tablet-less for any length of time.
Mine has light bleed down the right side of the screen, and the ride side of the tablet appears to be slightly raised. I can literally push the glass flush against the underbody. So yes, I have the same problem.
It is weird, it just feels a bit loose on the right hand side.
One thing I did notice is that it appears the Touch Glass is attached to the Back Panel with a rubbery adhesive or a rubber "filter" type thing. It almost reminds me of a gasket or something. So maybe it was actually designed to have some give since you will always be touching and pressing on the glass. However, I would expect that rubbery adhesive was intended to let the screen move a little in as you push it, but not somewhat push the screen away from the Back Panel.
Mine creeks where the time/notifications are in the bottom right of the screen
Is anybody willing to try heating up the screen a little bit with a hair dryer and then pressing the screen down until it dries/cures again?
I know when Anandtech.com described their teardown of the Prime, they used this method (hair-dryer/heat-gun) to get the screen off. He said he was able to put everything back together after he took it apart (I'm sure he has lots of experience though). Maybe this could actually be a really simple solution?
Having the same issue here guys. Just noticed it last night-I bought mine from Office Depot and I went and exchanged it right away. I opened my new one and it has the same issue. From what I am reading here it looks like it's a wide-spread issue and almost everyone has it.
I was wondering the same thing-how can I glue it to the back panel so it doesn't move. Mine has it above the speaker and a little bit on the other side where the volume keys are.
Any ideas on how to fix it?
Thanks.
BrianMigs said:
Is anybody willing to try heating up the screen a little bit with a hair dryer and then pressing the screen down until it dries/cures again?
I know when Anandtech.com described their teardown of the Prime, they used this method (hair-dryer/heat-gun) to get the screen off. He said he was able to put everything back together after he took it apart (I'm sure he has lots of experience though). Maybe this could actually be a really simple solution?
Click to expand...
Click to collapse
There is abthred in the general section on disassembling the Prime and they say not to heat up the unit since the screen isn't glued in it is dual tape of some sort. I am having the same issue and already exchanged mine-have the issue on the new unit too. Not sure if I should try to exchange it again...no fix yet, that I am aware of at least
Sent from my LG-P999 using xda premium
I've been using my Note since I got it in March of this year. I didn't purchase a case as I had my iPhone 3GS for close to 3 years and never had an issue dropping it or damaging it.
A few weeks ago I took a picture and it didn't look real good. I opened other pictures I had taken previously and they looked much sharper. I looked into settings and everything looked normal. I looked at the camera window and noticed it was scratched and dirty looking. I tried cleaning it but that didn't do anything.
I contacted Samsung and was told this is physical damage and I need to pay to get this fixed.
I'm not one to try and get everything fixed for free but in this case I think it's a poor design of the camera window as it isn't caved in and sticks out and can get scratched by having the phone rest on it's back. I think this is the normal way to place the phone when I'm not using it.
I would like to know if you guys think this is a poor design or if I'm the one who messed it up ? I know I could of bought a case and this would of never happened but I think if a phone needs a case to keep this from happening then Samsung should supply the case or worn you that you need one. My iPhone 3GS with no case never had an issue with the camera window getting scratched.
If you think this should be covered under warranty how should I convince Samsung as they tell me it's not.
Thanks for your time.
Just hard brick it and return it in for warranty. That's how most folks nowadays do it.
Sent from my SAMSUNG-SGH-I747 using xda premium
I can't speak for your phone, but I never use a case on any phone. My phones go through hell, very dusty and harsh environment (custom cabinet maker / installer). I have never had a problem with my camera lense cover. And I'm the guy who walks in the office and does the toss slide on the desk with my phone. But one thing I'm very good about is nothing ever goes in the pocket with my phone. Change, keys, lighter, none of that. But as hard as they try to make sure everything they produce is of the same quality, there are exceptions that slip through the cracks.
I love my note!
21productionz said:
I can't speak for your phone, but I never use a case on any phone. My phones go through hell, very dusty and harsh environment (custom cabinet maker / installer). I have never had a problem with my camera lense cover. And I'm the guy who walks in the office and does the toss slide on the desk with my phone. But one thing I'm very good about is nothing ever goes in the pocket with my phone. Change, keys, lighter, none of that. But as hard as they try to make sure everything they produce is of the same quality, there are exceptions that slip through the cracks.
I love my note!
Click to expand...
Click to collapse
I always put in my pockets with nothing in my pockets. I will admit I do put it on the counter when I'm at a bar and may move it around on the counter but I still think a 600 dollar phone shouldn't have the camera window flush where it can get scratched.
I sent Samsung an email telling them I find this unacceptable and that this should of never happened and it's not because I'm careless. If they expect us to use a case then supply it with the phone or maybe tell us to never put the phone on it's back as the camera window may get scratched. Guess if they still expect me to pay to get the window changed I will have to learn how to hard brick the phone.
I love my Note and changed because I liked the bigger screen and having a better camera than my iPhone 3GS. I've dealt with Samsung for an issue with my TV and it was pretty hard to get things resolved. Now I have an issue with one of there phones and it seems to be an issue again. My 3GS had an issue with the sensor called Apple got an appointment at an Apple store got there 15 minutes later I was out with a new phone. The new phone had the power supply burn up. Same scenario call got to the Apple store 15 minutes later out with a new phone. That being said I prefer Android over iOS but for customer service Samsung is way behind Apple.
Thanks for the replies. Will keep yo posted on the reply from Samsung to my latest email.
That's your bad my camera is fine and I've had it since pre-order. No case either.
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
I hate to say this but "IF it had a case, this probabaly would've never happend". The HTC one X camera bulges out and so far there isn't a lot of complaints about the camera lense getting scraped. Claiming that it was poorly designed is just a bad excuse.
-Once you go NOTE, you'd say 4 inches a Joke
[Lady]: "How do you carry that huge phone in your pocket?"
[Note User]: "I'm used to having huge stuff in my pants"
I never touch my lens with anything but a micro-cloth (plus it's in a fairly thick case, so sliding it around isn't an issue), and even then I got a scratch on it straight through the middle the first week I had the phone. But it's not noticeable in pictures. You'd REALLY have to screw up the lens to be able to see anything in a picture, the focal point is so far away from the lens...
EDIT: You may be able to just find a replacement lens and fix it yourself. I did that on a prior phone when the lens cracked from being dropped.
The camera is just that lens with a ribbon cable that connects it to the mainboard. Its not too hard to remove. I have seen replacements for other phones available.
Thanks for the replies. All I know my pictures look grainy now and when I look at the lens/window it's dull looking and I can't get it back clear. If I messed this up I would like to know how I did this as I have done nothing different with my Note compared to my 3GS. Will look into trying to fix this myself as paying 75-100 to get this done by the Samsung service center is expensive. I could understand if I did something stupid to mess it up but as far as I know I didn't.
DS1969 said:
I've been using my Note since I got it in March of this year. I didn't purchase a case as I had my iPhone 3GS for close to 3 years and never had an issue dropping it or damaging it.
A few weeks ago I took a picture and it didn't look real good. I opened other pictures I had taken previously and they looked much sharper. I looked into settings and everything looked normal. I looked at the camera window and noticed it was scratched and dirty looking. I tried cleaning it but that didn't do anything.
I contacted Samsung and was told this is physical damage and I need to pay to get this fixed.
I'm not one to try and get everything fixed for free but in this case I think it's a poor design of the camera window as it isn't caved in and sticks out and can get scratched by having the phone rest on it's back. I think this is the normal way to place the phone when I'm not using it.
I would like to know if you guys think this is a poor design or if I'm the one who messed it up ? I know I could of bought a case and this would of never happened but I think if a phone needs a case to keep this from happening then Samsung should supply the case or worn you that you need one. My iPhone 3GS with no case never had an issue with the camera window getting scratched.
Thanks for your time.
Click to expand...
Click to collapse
Hi, perhaps you should look into getting a replacement lens from ebay.
Here's a link:
http://www.ebay.com/itm/OEM-SAMSUNG...795739?pt=PDA_Accessories&hash=item20c9df1c9b
If you think this should be covered under warranty how should I convince Samsung as they tell me it's not.
DS1969 said:
Thanks for the replies. All I know my pictures look grainy now and when I look at the lens/window it's dull looking and I can't get it back clear. If I messed this up I would like to know how I did this as I have done nothing different with my Note compared to my 3GS. Will look into trying to fix this myself as paying 75-100 to get this done by the Samsung service center is expensive. I could understand if I did something stupid to mess it up but as far as I know I didn't.
Click to expand...
Click to collapse
You obviously did if it's not an issue for anyone else...
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
Otterbox. Period.
Sent from my SAMSUNG-SGH-I717 using xda premium
Yes ....otterbox ....
Mine has been very effective ....g
I don't really like cases but I went with the otterbox commuter and I love it. You might want to look into a case once you fix the camera.
My outside silver bezel was scratched from dropping and it also has the camera window. Not to hard to replace. Just need to undo screws and something to pry it off. Found part on eBay.
Sent from my SAMSUNG-SGH-I717 using Tapatalk 2
If you've been relegated to spending money to fix it or getting a warranty replacement, maybe try to polish it first, it has worked for me in the past with similar issues. I don't know if its a polycarbonate lense, but automotive stuff always helped me. Meguiars plastiX is the stuff I've used with reasonable success, at least with plastic parts. Maybe trying something like that will help clear it up, if the scratching isn't too deep anyway.
I am going to try this tonight.. as i also have a very very beat up camera window and mines been in a case from day 1. but its in my pocket with countless other things. i am going to try and hand polish it and if that fails low speed dremel with a polish wheel and some polish creme lololol worst that happens is i screw it up.. i've got a spare note anyways. I'll try and post some before an after pictures.
EDIT:
after looking at the protective shell its just plastic and not even attached to the camera. you can buy the replacement lens cover here for $5 and its 9 screws to change it out
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=140854323974
That's what I did. Hardest part is popping off the piece. I used something called an orange stick (plastic wedge thing). Its very easy though, hope it works out for you.
Sent from my SAMSUNG-SGH-I717 using Tapatalk 2
ukguy115 said:
That's what I did. Hardest part is popping off the piece. I used something called an orange stick (plastic wedge thing). Its very easy though, hope it works out for you.
Sent from my SAMSUNG-SGH-I717 using Tapatalk 2
Click to expand...
Click to collapse
If u take the phone apart so the back is off 9 screws and a case opener tool. you can bend those tabs straight and the piece falls right out. drop the new one in and bend the tabs down and done.
If you take some paper and roll it up and put it on either side of the camera when you're snapping the back cover on it will make it pop up enough to stick out a bit further than the camera cover but not so far as to stop it from locking all the clips on the cover. When you put it back down after that the camera cover doesn't touch the table.
Hey guys,
I got an official S-view cover from ATT store (Black) for my new note 3. I love it except for one major problem. When I fold the cover open around the back and set it down on something like a desk or table. Eventually the phone will sit completely flat against the cover and I am noticing that the cover will engage S-view mode on the phone while it it folded around the back of the phone. This is super annoying, because when its in S-View mode the phone is essentially locked and I can't do anything with it unless I un-fold the cover from around the back. I thought maybe I had a bad cover with super strong magnets or something so I returned it to ATT and bought another one from T-Mobile (This was the advice I got from Samsung support). I having the exact same problem with this one. Now I think its my phone. I can replicate this problem anytime by simply putting pressure on phone the and cover while it is folded around the back. When I hold the phone in my hand with the cover around the back it is not as prevalent because phone usually is not sitting completely flat to the cover (because the cover is still new). Once it breaks in and gets flimsy this will happen all the time completely limiting phone functional while the cover is around the back. I had the an S-View cover on a S4 and it never had this problem. Can any of you guys replicate this issue or do I have a bad phone. Please help, I need to know if I need to exchange my phone. Thanks in advance.
davparks said:
Hey guys,
I got an official S-view cover from ATT store (Black) for my new note 3. I love it except for one major problem. When I fold the cover open around the back and set it down on something like a desk or table. Eventually the phone will sit completely flat against the cover and I am noticing that the cover will engage S-view mode on the phone while it it folded around the back of the phone. This is super annoying, because when its in S-View mode the phone is essentially locked and I can't do anything with it unless I un-fold the cover from around the back. I thought maybe I had a bad cover with super strong magnets or something so I returned it to ATT and bought another one from T-Mobile (This was the advice I got from Samsung support). I having the exact same problem with this one. Now I think its my phone. I can replicate this problem anytime by simply putting pressure on phone the and cover while it is folded around the back. When I hold the phone in my hand with the cover around the back it is not as prevalent because phone usually is not sitting completely flat to the cover (because the cover is still new). Once it breaks in and gets flimsy this will happen all the time completely limiting phone functional while the cover is around the back. I had the an S-View cover on a S4 and it never had this problem. Can any of you guys replicate this issue or do I have a bad phone. Please help, I need to know if I need to exchange my phone. Thanks in advance.
Click to expand...
Click to collapse
I've got the same problem here. It seems to be an issue of either the little magnet on the bottom of the cover being too strong or the sensor on the phone being too sensitive. Definitely annoying and poorly designed. I don't know of any solution. I just wedge my finger behind the cover to prevent it from tripping, but that's hardly a solution.
Can't help you with this issue.. but I got bought two knock-offs on the web and never experience anything like that. Probably the way it's built with the OEM case.
I have the same problem with my sview case for note 3.
Interesting issue. I have the wireless charging s-view case and I can confirm that this dos not happen with it. I guess that is due to the thicker back cover portion.
Hello Everyone,
I did a search but I didn't see anyone else posting something about this, but it seems likes my display glass is starting to separate from my phone about halfway down the body. The glass is now a hair higher that the actual plastic body on the left and I can physically push it down and the screen actually shows a wave, like when pressing too hard on an LCD or touching a non-touchscreen. I was wondering if anyone else was having this issue?
I am trying to determine my best option for warranty service as I used the transfer the upgrade trick on VZW and don't want to throw up any red flags. I also want to keep my battery door because I have the wireless charging sticker on it.
GTiceman said:
Hello Everyone,
I did a search but I didn't see anyone else posting something about this, but it seems likes my display glass is starting to separate from my phone about halfway down the body. The glass is now a hair higher that the actual plastic body on the left and I can physically push it down and the screen actually shows a wave, like when pressing too hard on an LCD or touching a non-touchscreen. I was wondering if anyone else was having this issue?
I am trying to determine my best option for warranty service as I used the transfer the upgrade trick on VZW and don't want to throw up any red flags. I also want to keep my battery door because I have the wireless charging sticker on it.
Click to expand...
Click to collapse
Well that's no good! Sorry to hear that, I've not seen anywhere online either where people are having that problem.
As far as your options go though... Not sure you have many. You can either pay someone to replace the screen, if it's repairable and you can find someone.... Or obviously you'd have to just go for the insurance... I'm curious, how would you throw up any red flags if in fact there is something as obviously detected as your screen? I've not done the " upgrade trick " myself so bear with me if that's a silly question.
Well I might be able to get replaced under Manufacturer Warranty as there are no signs of damage. I also do not have insurance on the phone.
I'm having the same problem, the middle left edge of my screen is lifting up (very slightly) as well. Light bleeds through the edge of the screen and the lcd changes color when I press with moderate pressure. I plan on contacting Verizon for warranty support tmrw.
So I spoke to VZW and they told me that the screen lifting off from the bezel is considered a physical defect rather than a manufacturers defect so it is not covered under warranty support. FWIW my phone has not sustained any major drops or any major damage at all...
Do you guys have the qi sticker on yours? Mine does and it's a really tight fit... I was thinking that maybe it could be pushing out the screen
My Verizon LG G3 screen is now separating from the midframe on both sides in the middle of each side. It is up about a 16th of an inch, can be pushed easily back down but doesn't stay. Light leaks from the edges.
Sent from my VS985 4G using Tapatalk
---------- Post added at 05:10 PM ---------- Previous post was at 04:27 PM ----------
I discovered I had a spare sd chip and spare sim stored under my battery. When I removed them both, reinstalled the battery and qi circle case, the light leaking was gone.
Looks like the G3 is pretty flexible and that the display is not glued down except at the corners. If you crowd it in the back, the display can bulge out the front of the frame. This doesn't mean its broken or defective, just tight.
Sent from my VS985 4G using Tapatalk
Same thing has happened here on the left hand side only. I must admit I decided to store a spare SIM under the battery and a day or so later noticed a raised edge on the left side of the screen. I immediately realised this must be the case and removed the spare SIM but now the left side it ever so slightly raised, I notice this most when using the phone in the dark/dark areas as light bleeds out along that raised edge.
I may try get a replacement but since this is the second thing that occurred with the LG G3 for me (first was cracked camera lens) I may just come to the conclusion the LG cant cut it against my old Galaxy S3, which is still going without fault all these years. Might just be eyeing up a new S6 sometime in the future.
Just coming here to say that this is also happening to my device, only on the left side, as well.
I am trying to activate the warranty to get it fixed.
TTSDA said:
Just coming here to say that this is also happening to my device, only on the left side, as well.
I am trying to activate the warranty to get it fixed.
Click to expand...
Click to collapse
Me too.. Gonna see about getting it swapped
Did you guys bought your phone New from the store ? Like Verizon ?
This issues sound like the aftermarket LCD screens sold on eBay. I have bought 3 LCD screens from eBay. For the LG G2 twice and one for the G3. Once installed and a few uses on the phone, parts of the glass lifts up from the LCD and frame. That's cause they're high quality not genuine LG screens... They don't have the good loca glue on the screen.
I am experiencing the same problem. i only bought it in June 2015 and I don't know how that happened because I haven't even dropped it once.
I am thinking to claim the warranty. Because it seems like the glue has come off of it.
Yup. Mine is doing this too now... awesome! Left side as well. This is my 3rd G3 since July 2014 - I'm done with LG.
From what I've seen on other phones, the screen is often held on by some kind of adhesive. Considering this phone gets red hot if you do two things, like talk on the phone and try to web browse (like so hot it's hard to even hold), it probably slowly breaks down the adhesive holding the screen on.
My vs985 display lifts a bit in the middle along both sides, but only when I have a spare sim or sim adapter attached back there with the battery.
Doesn't take much.
Sent from my Nexus 6 using Tapatalk
i have this problem too in my phone screen...
ivann23 said:
i have this problem too in my phone screen...
Click to expand...
Click to collapse
Same. Light leaks out the Sides
Sent from my LG-VS985 using Tapatalk
A solution would be a case that cover that area of the phone. for example:
http://www.amazon.com/G3-Case-Bastex-Heavy-Protective/dp/B00PIYNE7Y/ref=sr_1_12?s=wireless&ie=UTF8&qid=1448743612&sr=1-12&keywords=g3+case
It's that Wireless Charging unit in the cover that brings the display up. Notice how the bleeding disappears when you take the cover off.
If you're not big on wireless charging, I suggest you perform operations on your backcover and get that bump out of there.
My LG G3 seemed to be having the same problem as well. It has beeen lifting slightly on both of the long sides and if it is on i can look at the side of the phone and see light escaping from the display. I orginally thought the my screen was somehow bent, but out of curiousity i inspected the back on the phone. In that i found that somehow my battery seems to be pushing my display out of the midframe... When i take the battery out the screen returns to the midframe on its own. When i try to put the battery back in it pokes out slighlty then when i put it in completely the display pops back out slightly on both sides again. I dont know how to fix this issue but if someone could figure it out that would be appericated.
jncool101 said:
My LG G3 seemed to be having the same problem as well. It has beeen lifting slightly on both of the long sides and if it is on i can look at the side of the phone and see light escaping from the display. I orginally thought the my screen was somehow bent, but out of curiousity i inspected the back on the phone. In that i found that somehow my battery seems to be pushing my display out of the midframe... When i take the battery out the screen returns to the midframe on its own. When i try to put the battery back in it pokes out slighlty then when i put it in completely the display pops back out slightly on both sides again. I dont know how to fix this issue but if someone could figure it out that would be appericated.
Click to expand...
Click to collapse
Have you tried a new battery? Is your battery swollen? Sometimes they get bloated when they go bad.