[Q] Vibrant pink start up screen - Vibrant Q&A, Help & Troubleshooting

Is there a link to explain how to delete or change the stock start up pink screen on the T959 Vibrant? I hate it.

Root the phone then put download Rom Manager and titanium backup. The download a custom rom and flash that....... you will never see the pink screen again.
You need to read more, alot more.........

WHAT ????
ya ya ya done all that , done all the reading, done a lot of roms, done a lot of rooting ........
your assumption is "all" rom make new boot screens I guess?????
guess not. go load Project_V & see what I'm talking about.
i'm looking for answers, not rebukes.

Never been on Project V and i dont even remember stock but theres 3 startup images usually ~Bootloader,kernel,bootanimation. I doubt its bootloader
If its Bootanimation is located in /system/media/bootanimation.zip just swap for something else or put "debug.sf.nobootanimation=1" in build.prop for no boot animation at all
Or it might be the kernel boot picture, change kernels since i dunno where kernel image is stored, Bullet is good

Root rom boot animation.
sent from my Sensation XD

replace the boot animation. and delete the shutdown animation. thats what i did. im currently on project v.
Sent from my Vibrant

Related

Help choose a kernel?

Girlfriend got a Fascinate yesterday and deemed me worthy enough to root it so she can kill all the bloatware (yay for me!). I've got root on the phone, and I understand that if I don't flash a custom kernel for the phone, it'll just break the recovery (using "cwm-recovery-all.tar") as soon as the phone boots up. She likes the overall touchwiz experience and all that, so I'm not sure of any rom's that are pretty stock cept for bloat, and any kernels I should use so recovery doesn't break.
I'm just concerned about getting recovery to stick so that I can perform a backup in case anything should happen.
I have a OG Droid, so all this bending over backwards for root and recovery is new to me and threads seem either too full of info or not enough for me, so here's me asking for help!
Either way, thanks!
Dustin
seraph_harim said:
Girlfriend got a Fascinate yesterday and deemed me worthy enough to root it so she can kill all the bloatware (yay for me!). I've got root on the phone, and I understand that if I don't flash a custom kernel for the phone, it'll just break the recovery (using "cwm-recovery-all.tar") as soon as the phone boots up. She likes the overall touchwiz experience and all that, so I'm not sure of any rom's that are pretty stock cept for bloat, and any kernels I should use so recovery doesn't break.
I'm just concerned about getting recovery to stick so that I can perform a backup in case anything should happen.
I have a OG Droid, so all this bending over backwards for root and recovery is new to me and threads seem either too full of info or not enough for me, so here's me asking for help!
Either way, thanks!
Dustin
Click to expand...
Click to collapse
You're just a few steps away.
First download this stock ed01 debloated/debinged stock ROM from link below and place in root directory of SD card:
http://www.multiupload.com/BKHF5DKJ18
also, choose a kernel and place on sd card. I recommend imnuts' PB&J variety-you might want to stick with stock voltage or -50uv for now. Be mindful to get non-voodoo if you aren't planning on getting into this. found here (try the 3rd or 5th option):
https://sites.google.com/a/imnuts.net/android/kernels
Next, use Odin to install your CWM again. When you boot up this time, boot directly into CWM by turning phone off, and holding volume down, volume up, and power (all 3) until CWM appears. flash your rom, and kernel. If you don't boot into cwm directly by this method, the stock kernel will overwrite CWM, which is what was happening to you, i believe.
after rom/kernel is installed, choose reboot system now from cwm.
Yeah, I just wasn't sure about what kernel would be good for her phone, so I just was kinda "stuck" at that point. ^^;;
But I will give it a go and she how it works out! thanks much!
Everything was a success, and there was much rejoicing!
They only thing I noticed was after the Samsung bootloop animation, it goes to the default "android" one instead of Verizon's... I'm sure there's a way to get that back, but its not in the system dump I have. I'm currently searching for it on the net ^^;;
Thanks again!
Edit: I was able to find a boot animation that had the first part of the Galaxy S bit without the Verizon part. When it booted it just repeated the "Galaxy S" animation. I thought by adding, renaming, and reversing the shutdown animation would at least give that back, but now I just get a black screen for that segment...Still working on it....I think it has to do with the txt file inside, but i'm not sure.
The PowerOn.wav is still present on the phone, but it doesn't play either.... >_<
Are you certain you put poweron.wav in /system/etc folder?
Yup, its there and plays fine in the media player, but I just noticed that there's also a PowerOn.snd file right above. Could that be interfering?
Make a backup elsewhere of that file, then delete it and see if that works.
Sent from mah Fascinate using XDA Premium App
The sound won't work with most kernels that are not stock because the boot sounds aren't actually turned on in the kernel
Swyped from my CM7 fascinate
Oh okay, any chance to get the default boot animation from any of you guys? She doesn't mind the sound "missing," but she would like the boot animation at least.
Eitiher way, thanks much for the info!
since it seems like you're using a stock Rom just debloated and rooted, you may want to think about just using the stock Kernel with the recovery wipe removed, it has two options one that sticks with the stock boot animation and may still have sound and one that allows custom boot animations. This kernel was created by imnuts and can be found here:
http://forum.xda-developers.com/showthread.php?t=1060457
Awesome, thanks! I'll give that a try and see how it turns out!
And it worked! Thanks again!

[HELP!] How to install custom boot animation Samsung Galaxy S2 I9100T

Hi all, i am new on here, so let me know if this is the right forum to post this on.
i have a rooted vodaphone australia, I9100T Samsung Galaxy S2 running the stock 2.3.5 rom. it has a ChainFire Kernel installed.
i want to change the boot animation. so that instead of the vodaphone animation it shows this boot animation instead:
http://forum.xda-developers.com/showthread.php?t=693064
i have tried heaps of things, i have searched all over google, but i cant find anything about how to install on a S2, only other phones.
can someone please help me cos i am getting bored :-(
Thanks Heaps
Cheers CoreyB
You need to first have a kernel supporting custom boot animation such as siyahkernel.
http://forum.xda-developers.com/showthread.php?t=1263838
Edit: 9100 and 9100T are same where it comes to ROM's and kernels mods and themes etc. There is just specific modems for the T version found in the shipped modem thread. Other 9100 modems may work as well, some better, most worse.
There are a few apps about that easily download and instal various boot animations. Some of many around.......
https://market.android.com/details?id=com.jrummy.liberty.toolbox
https://market.android.com/details?id=com.simproductions.bachanger
Hope this helps
Sent from my GT-I9100 using xda premium
Hi, thanks heaps, that rom toolbox is great, it has loads of great bootloaders, and it has all the features i have been trying to download seprately (cpu overclocker ect).
the other bootanimation changer does not work on the SGS2.
and the rom toolbox wont let me install my own custom rom, you have to install the ones it comes with. and i really want the android pissing on apple bootanimation lol.
i have copyed the zip file to system/media/bootanimation
but when i start the phone up, where the is normaly the vodaphone bootanimation, the is just a black screen, and then it turns to the lockscreen.
can someone help me figure out how to add a custom bootanimation
Thanks heaps to anyone who can help
Cheers Corey
1. Samsung is a little different, and I am pretty sure you need to have a kernel that supports custom boot animation, such as I posted above.
2. Before that, you can backup and rename your original bootanimation.zip ( to .bak).
3. Make sure the bootanimation.zip has "permissions" (mount r/w first)
Or,
4. Flash the attachment manually in CWM Recovery (wipe cache and advanced/dalvik first)
5. If it still dosn't work, back to step one.
Hit the "thanks" when you have time.
Edit: Credit to checkROM for the CWM .zip and original dev for the anim

boot logo change?

has anyone successfully done this? i have a rooted fascinate running aokp milestone 4. i have read all the forums and have studied for hours. i finally got the nerve to try it....and....brick. lol i tried using heimdall. installed the drivers properly, opened the program, flashed the hacked param.lfs, program ran, phone booted into a blank screen for about 25 sec then went into recovery. tried wiping and restoring but right back to recovery i went. lol . had to odin to stock and build back up.
was just wondering if someone got this to work and could maybe give me a clue of what i may have done wrong..thanx.
Are you just wanting to replace the boot animation? In the case of AOPK, this would be the Unicorn animation. I do this all the time, directly from the phone. I use ES Explorer, although Root Explorer or an equivalent should work just as well. You'll need to go to /System/Media and delete the pre-exisiting bootanimation.zip. You can then replace this file with your preferred boot animation and be good to go. You can also move the old bootanimation.zip to your SD card before replacing it, allowing for easy recovery if you decide you want it back. You can also place your preferred boot animation in /data/local and supposedly a re-flash won't overwrite the boot animation. I haven't done this, as I prefer to see what animation is included in the ROM, then change it out if I wish. I'm sure there's other ways to accomplish this, but this procedure is quite simple. My preference at the moment is the rockets animation from makelegs' CM7 Kang, but there are lots available for download. Or, you can make your own if you are so inclined. I have a folder on my SD card that has a half-dozen boot animations in it, allowing me to choose which one I'd like to use.
If you need to download ES Explorer, there are a few options you'll need to enable to be able to manipulate the local filesystem. They are "Root Explorer" and "Mount File System" I think it goes without saying, but you'll need to grant ES Explorer with root permissions when prompted.
WARNING: If modifying your file system like this, BE CAREFUL what you delete. Delete the wrong file, and you could be starting over. I am not responsible for you bricking your phone.
I believe bdogg is referring to the boot splash screen. If you are following the directions that I think you are, I have not yet been successful at getting it to work yet either . If you figure it out let me know.
Sent from my SCH-I500
It is quite possible that I misunderstood which screen it was he was wanting to change. On my phone, all I get during the boot sequence is the black & white "Samsung" screen twice (once when the phone first powers on, and then it flashes quickly and reappears for what I assume is the Glitch kernel), and then the AOKP Unicorn boot animation. Once the Unicorn boot animation finishes, I get the unlock screen, at which point I consider the boot process finished. To my knowledge, you can't change the B&W Samsung screen. I could very much be wrong here, I've just never seen anything stating differently. The Glitch "logo" is set in the kernel, although I'm guessing if you edit the right thing in the .zip before you flash it that could be changed. It's not something I care to attempt, it's not on screen long enough for me to really care, and I have no preference to go messing around in the kernel. That leaves the Unicorn boot animation, which I know can be quite easily changed out to whatever different boot animation you prefer.
I'm currently running AOKP Build 28 with Glitch 14 B6.
EDIT: After a quick Google search, it appears I am wrong and that it is possible to edit the default "Samsung" screen. I didn't fully read up on the process, as I don't care to do it myself, but I did glean enough to know that I probably posted instructions here to something that you already knew, and that didn't help you one bit. I'll do better next time.
Yes, we are talking about the initial samsung logo. It is fun to change it to other things i admit. I only was able to do it per the instructions on the gb roms. I thought I saw new ones for ics but can't remember where I saw them.
Sent from my SCH-I500

Animated Boot Logo

does anyone have any good boot logos, i had downloaded the obesession theme and i don't like the boot logo but i don't know how to change back to stock or the android one, anyone have it and know how to change it. thank u
I like to use rom toolbox. There are a good 100 or so to choose from.
Most are from other phones like the moto razr for example
Sent from my SGH-I717R using Tapatalk
"absolute system root tools" has tons of customize boot loaders,,, different fonts,terminal emulator,ad,blocker,build props, stuff like that all in one,,,pretty cool,,so far having trouble with liberty rom box,,,made my device reboot alot,,,?
I will fix the revert script so it restores your old one when i have time.

[Q] Restoring Default Boot ani on NAB

Hi all! I have a slight issue.. So my sisters phone is rooted and on offical kit-kat NAB.
I tried to install @kevinrocksman's hypnotoad boot animation, flashable through twrp. http://forum.xda-developers.com/showthread.php?t=2467543
It didnt work and after the Note 3 screen it stays black till it boots up. I figure it is because the phones only on stock rooted, and that uses a bunch of weird .qmg files. I cant restore the nandroid for several reasons so thats not an option. So I tried the following troubleshooting steps to either get the hypnotoad to work or restore the default sprint sound and animation.
1. I manually pushed the hypnotoad bootanimation.zip into system/media and changed permissions. no go
2. Then in hypnotoad aroma installer I installed it again. Still no go
3. In aroma I tried restore default feature, the sounds back but no yellow sprint animation
4.I deleted the bootanimation.zip in system/media. no go
.5.On the thread @shabbypenguin commented. Posting an enable bootanimation.zip to have the phone look for .zips instead of .qmg. I flashed it. (http://www.mediafire.com/download/xlbsop29q44vlco/Enable-Bootanimation.zip)
6. Then I tried twrping the hypnotoad aroma boot ani again, hoping shabbypenguins enable bootani will make it work. Nada
7. I tried restoring default again through aroma, still boots with sound but no yellow sprint animation.
So if anyone has an idea to either get the hypntoad to work or get back the defualt boot animation, that would be GREATLY appreciated.
I know it was probably dumb to try on stock rooted sorry, but my sister is stuck with no bootanimation, and she does not want to flash a new rom
So thanks
what thread was this??
shabbypenguin said:
what thread was this??
Click to expand...
Click to collapse
All was found on @kevinrocksman s thread. Your comment was at the bottom of the page
Thread: http://forum.xda-developers.com/showthread.php?t=2467543
I hope you have a fix mr. shabbypenguin sir! :fingers-crossed:
Do you know of any fixes @kevinrocksman??
I would think there would be a flashable. Zip laying around but i couldn't find any
if you read to the second page, you would have seen that zip doesnt work
shabbypenguin said:
if you read to the second page, you would have seen that zip doesnt work
Click to expand...
Click to collapse
Ive read the whole thread, and the comments. I believed it would work because I have been on several stock Samsung based roms, and all of either the flashable.zips or manually pushing to /system/media have worked fine. Im even currently on AOSP and pushing the monster attack bootanimation.zip to system/media worked perfectly. So I believe my error lies in possibly two things. Either..
A.these bootanimaton.zips are not NAB compatible; which would seem odd because as far as I know bootanimation.zips are fairly universal. It worked on AOSP just fine
B. Or since this is stock STOCK rooted, the system files have not been configured by a dev to allow changing bootanimation.zips.
If it is scenario B, which i think is more likely, then a solution would be to flash a custom built Nab rom, right? I would think if I flashed Freezas stockISH rom it would be too stock and the boot ani system files would be the same situation. Which is why im thinking @sac23 s kit-kats v1 nab rom would allow me to change bootanimation.zip. Do you think this would be accurate?
I did some further digging and I believe I may have found a way to be able to push bootanimation.zips and have them work even on stock stock roms.
What do you think of this? http://forum.xda-developers.com/showthread.php?p=50218786
I gather if I push the bootanimation.bin in OP and replace it with the current one in /system/bin it will enable me to change bootanimations just like normal. You probably would have a better idea then me, do you think this is an accurate conclusion?
Thanks :good:
kevinrocksman said:
samsung has been using qmg files since before the SGS1, this http://www.mediafire.com/download/xl...tanimation.zip should enable it. it swaps out the bootanimation binary for one looking for .zip's. it may not work if they are still using samsungani
Click to expand...
Click to collapse
this is what it does in adb when u execute bootanimation
CANNOT LINK EXECUTABLE: cannot locate symbol "_ZN7android21SurfaceComposerClient
14getDisplayInfoEiPNS_11DisplayInfoE" referenced by "bootanimation"...
Click to expand...
Click to collapse
as for all the other zips idk, but mine doesnt. as for figureing it out etc, youll have to ask someone who is up to date on samsung software and/or owns a note 3.
shabbypenguin said:
as for all the other zips idk, but mine doesnt. as for figureing it out etc idk, youll have to ask someone who is up to date on samsung software and/or owns a note 3.
Click to expand...
Click to collapse
okay thanks anyway, I happen to have an extra replacement note 3 for a little bit so ill run some tests!
thanks

Categories

Resources