Related
So i've been an Atrix owner for about 2 weeks now and my worst nightmare happend today. I was buying a drink from a vending machine and the phone slipped out of my pocket and fell SCREEN FIRST onto concrete.
I quickly picked it up and noticed THERE WAS A HUGE CRACK in the screen!
I AM SO SAD RIGHT NOW cause i bought the atrix outright from AT&T
i dont think the LCD panel itself was damaged but the glass on the surface only. The display looks perfectly fine still so i was curious if anyone knows how to switch out the glass part? What tools do i need?
I found this one ebay:
http://cgi.ebay.com/Motorola-MB860-...838?pt=LH_DefaultDomain_0&hash=item588d7db4fe
is this the right part?
or do i have to buy the entire LCD, cause its much more expensive:
http://cgi.ebay.com/AT-T-MOTOROLA-A...507?pt=LH_DefaultDomain_0&hash=item33666a4883
also, does anyone know any reputable sellers that sell LEGIT parts such as the digitizer? I'm not sure if i can trust these random ebay sellers...any suggestions would be appreciated
i attached some pictures to show you what happend - i still can't believe it happend
i'm also really surpirsed the gorilla glass broke so easily. The drop was at MOST 1.5 feet..
Bakedbread said:
So i've been an Atrix owner for about 2 weeks now and my worst nightmare happend today. I was buying a drink from a vending machine and the phone slipped out of my pocket and fell SCREEN FIRST onto concrete.
I quickly picked it up and noticed THERE WAS A HUGE CRACK in the screen!
I AM SO SAD RIGHT NOW cause i bought the atrix outright from AT&T
i dont think the LCD panel itself was damaged but the glass on the surface only. The display looks perfectly fine still so i was curious if anyone knows how to switch out the glass part? What tools do i need?
I found this one ebay:
http://cgi.ebay.com/Motorola-MB860-...838?pt=LH_DefaultDomain_0&hash=item588d7db4fe
is this the right part?
or do i have to buy the entire LCD, cause its much more expensive:
http://cgi.ebay.com/AT-T-MOTOROLA-A...507?pt=LH_DefaultDomain_0&hash=item33666a4883
also, does anyone know any reputable sellers that sell LEGIT parts such as the digitizer? I'm not sure if i can trust these random ebay sellers...any suggestions would be appreciated
i attached some pictures to show you what happend - i still can't believe it happend
i'm also really surpirsed the gorilla glass broke so easily. The drop was at MOST 1.5 feet..
Click to expand...
Click to collapse
Yea, thats not a bad deal. You could use DealExtreme though if you wanted. But this seems like a good deal.
Teardown Video.
http://www.youtube.com/watch?v=TbR56jSplRs
Watched a bit and it looks like a good tutorial.
Also, if you don't have the tools you might want this kit.
http://cgi.ebay.com/Motorola-MB860-...195?pt=LH_DefaultDomain_0&hash=item2310051643
It's about the same price and those are both going to ship from Hong Kong. So expect a wait. I didn't find any sellers in the U.S.
There are some that would ship from the U.S. without tools but the price is more like fifty bones instead of 30 something.
Good Luck
JdgM3NT4L said:
Teardown Video.
http://www.youtube.com/watch?v=TbR56jSplRs
Watched a bit and it looks like a good tutorial.
Also, if you don't have the tools you might want this kit.
http://cgi.ebay.com/Motorola-MB860-...195?pt=LH_DefaultDomain_0&hash=item2310051643
It's about the same price and those are both going to ship from Hong Kong. So expect a wait. I didn't find any sellers in the U.S.
There are some that would ship from the U.S. without tools but the price is more like fifty bones instead of 30 something.
Good Luck
Click to expand...
Click to collapse
You are brave soul for recommending such a bad tools.
Sent from my SAMSUNG-SGH-I897 using Tapatalk
Thanks for the recommendations everyone
Do you suggest a better pack of tools? Why do you say they're bad?
Sent from my MB860 using XDA App
greenstuffs said:
You are brave soul for recommending such a bad tools.
Sent from my SAMSUNG-SGH-I897 using Tapatalk
Click to expand...
Click to collapse
Nah, they are more than capable. I replace digitizers frequently and I rarely have to break out my "good set' of tools. Yeah these are simply cheap lumps of plastic. But they work. And these tools should be safer to use than almost anything that the average person, who doesn't do this sort of thing regularly, might have on hand. I just didn't want him to order a digitizer and attack it with a butterknife. I was trying to be subtle about it tho... We don't want anyone to scuff their bezel now do we?
I am always on the lookout for great deals on tools for this. And I look forward to your recommendation for a tool set.
Atrix 4G Glass
You can find a replacement glass here. globalpartsdirect dot com
G2Smooth;129674
33 said:
You can find a replacement glass here. globalpartsdirect dot com
Click to expand...
Click to collapse
You mean http://www.globaldirectparts.com/SearchResults.asp?Search=atrix
Your phone should be under warranty! Call company first!
Sent from my MB860 using XDA Premium App
gonka95 said:
Your phone should be under warranty! Call company first!
Sent from my MB860 using XDA Premium App
Click to expand...
Click to collapse
Warranty covers a broken screen? Reason I ask is because I would rather have MOTO replace the screen (or the phone entirely) than me replacing the screen and voiding the warranty. I do not have insurance
I broke the glass on my phone 3 weeks after I bought it and didnt have insurance on it. I called motorola and they sent me an rma. I sent it in and they sent it back to me fixed in less than a week. If I remember right it cost $90 for them to fix it.
so it was only the digitizer after all?
+1 for photo of toilet roll by the bed, classy...
Sent from my MB860 using Tapatalk 2
JdgM3NT4L said:
Nah, they are more than capable. I replace digitizers frequently and I rarely have to break out my "good set' of tools. Yeah these are simply cheap lumps of plastic. But they work. And these tools should be safer to use than almost anything that the average person, who doesn't do this sort of thing regularly, might have on hand. I just didn't want him to order a digitizer and attack it with a butterknife. I was trying to be subtle about it tho... We don't want anyone to scuff their bezel now do we?
I am always on the lookout for great deals on tools for this. And I look forward to your recommendation for a tool set.
Click to expand...
Click to collapse
A friend and I splurged on the $60 iFixit tool kit because we made some spare cash on the side repairing classmates' phones. It works well, although I still don't know if I would justify the price. It seems that the major complaint on reviews for replacement electronics parts are the parts that come with them, if at all, so maybe getting a better set is worth it if you replace digitizers frequently. Replacing the Atrix digitizer/screen is a fairly easy task compared to other phones until you get to putting the new screen on, at which point trying to get the cables back into the housing becomes a pain.'
Good luck!
consolation said:
+1 for photo of toilet roll by the bed, classy...
Sent from my MB860 using Tapatalk 2
Click to expand...
Click to collapse
Lol.....betting if you look hard enough there's lotion there somewhere too!
Sent from my MB860 using xda premium
Ugh I'm going to have to do this. My digi. Is farked as well. Now, is there a video to put this back together?. I agree that taking it apart is not the hard part at all.
iFixit will have a tear down guide.
Sent from my MB860 using Tapatalk 2
Surprisingly there is no video to put it together...
Let me tell you from experience that it's damn near impossible to put it back together without tearing the digitizer ribbon straight off the screen while trying to slip it through that tiny hole that you pulled it out of. I've replaced two screens and I still don't think I can get it right.
My screen cracked twice while still under warranty, so I played the clueless n00b after I replaced the glass (cracked screens are not covered under warranty) and claimed the phone wasn't working and I couldn't figure out why.
Strange thing is, I also couldn't find a place online that would do replacement digitizers either. I didn't look for long, but if you don't have an option of a warranty return, I'd pay the $50 or so to let someone else do this for you and get it right...
YMMV...
I recommend taking it apart completely, you can attach the digitizer to the bezel/chassis and then you don't have to deal with trying to slide the cable through that tiny hole, you can just clean the digitizer, clean the lcd, put them together and then put the entire mounting plate back together and it just clips straight in...essentially you make this:
http://www.ebay.com/itm/180835204777?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649
completely removes the chance of tearing the cable off the back of the digitizer...which is pretty common, sort of adds the step of getting the mounting plate off the fascia bezel...but its not to hard, be careful when popping up the volume/buttons camera cable area, that cable tears easily.
Dropped my Atrix before i got me a casing for it.
I want to know how is the quality of the replacements glass wise is it still gorilla glass or?
I got my screen replaced at youbreak Ifix. The screen is identical, just be careful that it gets seated well or you will get a lot of dust under the screen..drives me crazy!
Sent from my MB860 using Tapatalk
If you haven't already bought one take a look at this at ebay,
http://www.ebay.com/itm/OEM-Motorol...052?pt=LH_DefaultDomain_0&hash=item3cc340bee4 .
It is the digitizer and frame assembly. I just bought one of these for mine and I gotta say that I could not be any happier. For one it is OEM. Another I didn't have to seperate the frame from the glass or mess with glue tape. It is a b!tch connecting the ribbon cable back to the mainboard. But other than that it is an easy repair.
Oh, it looks absolutely brand spankin' new.
i replaced my digitizer with a part i got from amazon, big mistake, it was so much worse, looked identical but was just aweful, luckily moto replaced it for free as now i didnt have a broken screen it was still under warranty! good as new now.
edit: also looking at that post above, if you are going to do it yourself having it come with the frame would be great as mine didnt, so i had to use a hairdrier to heat up the glue holding the digitizer to the frame, real PITA
Yeah you're right ears1991, it was nice and easy not having to worry with separating the glass from the frame and then reattaching the new one. My phone looks better than ever. On the very first day that I ever owned it I handed it to my 24 year old son and he immediately dropped it. It put a nice gouge it the glass so until now I have never really had an Atrix that looked new.
JdgM3NT4L said:
If you haven't already bought one take a look at this at ebay,
http://www.ebay.com/itm/OEM-Motorol...052?pt=LH_DefaultDomain_0&hash=item3cc340bee4 .
It is the digitizer and frame assembly. I just bought one of these for mine and I gotta say that I could not be any happier. For one it is OEM. Another I didn't have to seperate the frame from the glass or mess with glue tape. It is a b!tch connecting the ribbon cable back to the mainboard. But other than that it is an easy repair.
Oh, it looks absolutely brand spankin' new.
Click to expand...
Click to collapse
do you have instructions on how you fixed it or a youtube video, and also what tools did you need to fix it? my digitizer has been acting crazy and I need to replace it.
yea youtube video called
replacing atrix digitizer
from Repair universe
problem is thwy only show how to *completly disasemble it
they dont show how to put it back together
ltdanno360 said:
yea youtube video called
replacing atrix digitizer
from Repair universe
problem is thwy only show how to *completly disasemble it
they dont show how to put it back together
Click to expand...
Click to collapse
DONT USE REPAIR UNIVERSE! Horrible customer service, no phone support, slow ass shipping even tho I paid extra for next day (got it in same time as regular shipping) and gave me the run around when they sent me a defective digitizer first time. Took me nearly a month from order to get what i paid for and only after I threatened to notify BBB of their horrible service.
pre4speed said:
DONT USE REPAIR UNIVERSE! Horrible customer service, no phone support, slow ass shipping even tho I paid extra for next day (got it in same time as regular shipping) and gave me the run around when they sent me a defective digitizer first time. Took me nearly a month from order to get what i paid for and only after I threatened to notify BBB of their horrible service.
Click to expand...
Click to collapse
The queen has spoken yea they suck!
Sent from my MB860 using Tapatalk
quinto0827 said:
do you have instructions on how you fixed it or a youtube video, and also what tools did you need to fix it? my digitizer has been acting crazy and I need to replace it.
Click to expand...
Click to collapse
I watched this video and only needed a small phillips screwdriver and a prytool. I haven't found a video where they show it going back together... Just reverse the steps and you'll be ok. The only hard part was getting one of the ribbon cables back in place. And I gotta say that cable was a b!tch. But I have large fingers and I still got it. So if you have some degree of patience and aren't afraid of messing with tiny stuff go for it.
thanks a lot. i just ordered from the person you suggested from eBay. ill give an update when it comes on Thursday and I replace it.
Cool, I just took my daughters apart, it is dead. I thought that maybe if I disconnected and reconnected the mainboard that maybe it would help. No dice. But I did find that using a pair of locking forceps helped a lot with the cables. Actually it was really, really easy. So if you have a pair, or know someone who works at a hospital that can get a pair, it is worth the trouble. Good Luck.
i just fixed, worked like a charm. and you were right, those damn ribbon cables were a pain. i can finally type regular letters again. lol.
That's great. Was yours pretty much new looking? Mine looks great, there are two tiny dimples on the upper bezel but they aren't easy to see. It's still a 9/10.
I dropped my phone hard. Screen and digitizer still work but the glass is shattered and the corner of the housing is dented pretty badly. What is the best source for parts? I replaced the screen on my evo 3d due to a faulty digitizer and ordered parts for some random place. They turned out to be [email protected] and want to avoid that mistake. All I should need is the digitizer right? Is the glass and digitizer one piece?
It is one piece, the digi/lcd are fused. There are alot of ebay suppliers who will send a new part of it is defective. I've had pretty good luck recently, even on the evo lte a few times.
I always check eBay or amazon
Sent from my EVO using xda premium
I've had to replace a couple screens (not the 4g lte yet) and ebay is a good place to go.
Couple notes:
Some people say you can just replace the glass using a heat gun or blow dryer but I've read more stories of people breaking their lcd doing this I would try to get the glass off first then ordering the parts. If that works you just saved yourself 40 bucks.
If that doesn't work and your feeling clever and fearful this may happen again then I would suggest buying the lcd and digitizer separately. Why? I f#cked it up the first time? You might ask . Simple the factory glue and the tape that the digitizer will come with are two different things and the tape is a lot easier to get off then the glue. Good luck and patience
Asadullah said:
I've had to replace a couple screens (not the 4g lte yet) and ebay is a good place to go.
Couple notes:
Some people say you can just replace the glass using a heat gun or blow dryer but I've read more stories of people breaking their lcd doing this I would try to get the glass off first then ordering the parts. If that works you just saved yourself 40 bucks.
If that doesn't work and your feeling clever and fearful this may happen again then I would suggest buying the lcd and digitizer separately. Why? I f#cked it up the first time? You might ask . Simple the factory glue and the tape that the digitizer will come with are two different things and the tape is a lot easier to get off then the glue. Good luck and patience
Click to expand...
Click to collapse
When I replaced the digitizer on my evo 3d I remember what a pain getting all the sticky pieces apart was so I just went with the whole replacement screen and glass. Got a white one off ebay for not too much. I'm going to have a frankenstein phone
I did take it into sprint just to see if they would maybe offer me some decent deal. The friendly sales guy tried to talk me into a second line and another phone to get me by for a year while I waited for my next upgrade. riight.
Sprint has always replaced my busted screens for free. Only takes about 20min.
From my Evo LTE, yup.
scottspa74 said:
Sprint has always replaced my busted screens for free. Only takes about 20min.
From my Evo LTE, yup.
Click to expand...
Click to collapse
Huh I thought they stop doing that
Sent from my EVO using Tapatalk 2
That's entirely possible, it's been a long time, and they've begun to skimp on ALL services. No more roadside assistance, something screwy with family locater etc.
From my Evo LTE, yup.
Hey, so I cracked my One X+ screen quite badly, it fell on it's side on a wood floor, and it cracked.
Thing is, this isn't a normal crack, if I put it in my pocket, I end up with pieces of glass everywhere, and if I use it, my fingers get cut and bleed, so I can't use it right now.
I am not a handy guy myself, so I won't even try fixing it, I've been checking out some places, they seem decent, but they mostly do iPhone repairs. One of them quoted me $150, and another $130
The $150 has a 5-star yelp rating, but then again, iPhone screens (from what I know) are fairly easy to replace
I'm so pissed at myself, because I never wanted to use a case, as the phone is really sexy and feels good.
I e-mailed corning for the gorilla glass damage, which was weird, and they said that they will pay me $200 for the phone and they will (obviously) keep it for research (Probably replace the screen and sell it?)
I'm so worried, because after reading around, it seems that HTC One X screens never end up looking good, and I can imagine that being worse for the X+, as it is a bit more rare.
The screen is cracked on the side, and those cracks extend all the way to the other side of the phone, but on the left side, the glass is just destroyed.
Will post pics later
Wow, that sucks bud. I broke the screen on my SGSII last year and just chucked it and bought a phone on E-bay.
I replaced the screen on an I-pod and it was pretty simple. I did a lot of research before I did it and it turned out good.
I don't know what to tell you as far as replacement. If you got $200.00 for the broken one and could find one on E-bay for $450.00, you would have a replacement for $250.00. Just a thought.
Best of luck and post some picks when you can.
Steve
Yeah, I'm mostly discarding that option. I do wonder if its actually possible for the phone to end up decently after one of these repairs
Sent from my WT19a using Tapatalk 4 Beta
theproftw said:
Yeah, I'm mostly discarding that option. I do wonder if its actually possible for the phone to end up decently after one of these repairs
Sent from my WT19a using Tapatalk 4 Beta
Click to expand...
Click to collapse
I spose if you found someone qualified to do the repair, it should be like new when it's done. Be sure they use a good quality screen and digitizer for the repair. Should even consider using a direct HTC replacement. Of course that will up your cost.
I spose it depends on what you are willing to do for your phone. How bad do you want your HOX+ back??
I would just send it to HTC, cost me 180 british pounds, the good side is that you will get a new unibody, and a full service on the insides of the phone. I think its well worth it, and it keeps your warranty in play.
boe323 said:
I would just send it to HTC, cost me 180 british pounds, the good side is that you will get a new unibody, and a full service on the insides of the phone. I think its well worth it, and it keeps your warranty in play.
Click to expand...
Click to collapse
I don't care much about the warranty, if it dies I'll replace it, thing is, I can get upto $150, since I'm a high school kid, and (this is serious!) my parents said that if I break my phone, they're not replacing my phone in the next 2 years.
So they don't know.
stevespens said:
I spose if you found someone qualified to do the repair, it should be like new when it's done. Be sure they use a good quality screen and digitizer for the repair. Should even consider using a direct HTC replacement. Of course that will up your cost.
I spose it depends on what you are willing to do for your phone. How bad do you want your HOX+ back??
Click to expand...
Click to collapse
I ain't got that much cash, and I need it this week and can't do it via mail, so prolly not happening
Sent from my WT19a using Tapatalk 4 Beta
Actually the one x and one x plua use the same screen/digitizer and you have to pry the back of it off and disconnect it all if you really want that phone to work and keep any bit of warrenty send it to htc if not bring it to a repair shop
Sent from my HTC One X+ using xda premium
They sell kits on e bay with instructions and ideo instructions on you tube invest in an otter box it dosent add too much bulk and its a bargain ive seen people drop their phones 35 feet when i worked in chemical plants otter boxes on had a gash in it from tumbling down insulation bouncing off pipes and hitting concrete foundations phone was 100%fine
http://www.dealsishop.com/htc-one-x...acement.html?gclid=CNr_4uCAq7gCFZRj7AodeWQAIQ
http://www.dealsishop.com/htc-case-opening-tool-kit.html
Sent from my HTC One X+ using xda premium
The One X and One X + are definitely a difficult replacement. You need to FULLY clean up the old adhesive and take your time or you will get bad results. You also need to use the right adhesives to get good results. It would cost about $10 to $15 to get a role of adhesive you could use (trimming needed in tight areas) that would do about 50 phones.
Take your time and be thorough. Also be REALLY carefull with all the flex cables or you will be screwed when you put it back together.
I have fixed about 25 of the One X and one One X+ and its a minimum of 1.5 hours of work for me now and I know exactly what to do.
Thread has been closed as there is another cracked screen thread currently open. Duplicate threads are not allowed
DNA fell out my shirt pocket, landed on the edge and of course shattered. First drop ever.
There's glass on Amazon and ebay for about $15
Then there's glass and LCD together about $70
I've seen the videos and read the articles and they're somewhat conflicting?
How difficult is it realistically to change the screen myself AND get it back together.
I also had the idea of using it to a repair facility at the mall.
Question is address those prices reasonable for a quality screen?
What's the best way to fix the phone reasonably?
Glass and LCD together is what you want because of the design. The glass and LCD basically become a single piece. If you do just the glass you may have issues with the LCD not properly adhesing and therefore appearing further from the glass. Sometimes the digitizer will have issues after that. Best to spend more money and get both pieces pre-constructed.
Sucks dude, i did mine yesterday. First drop, BAM, right on the corner. Shattered it. I got geek squad at best buy, way better than assurion. No deductible. Broke screen, throw out some sim card issues, brand new dna on the way. Its on back order thougg. Not here in 2 weeks, get free pgone equal or less than dna full price. Geek squad well worth $10 a month!
Sent from my ADR6350 using xda app-developers app
I'm going to order the screen/LCD combo and try it.
Been debating options and i'm keeping this phone until at least November. I'll take photos.
Best thing is cut losses short and send to HTC. I think it was $220. If you do it yourself more likely than not you'll end up with a bad result, functionally and/or cosmetically. I took my phone to ubreakifix.com and after taking it back twice, they gave up. Sent to HTC and they said the main board was damaged, etc and wanted about $350. So just do it right the first time.
Sent from my HTC6435LVW using Tapatalk 4
I hate to say it but it's not worth $200. They can be found going for less than that on CL in my area .
I am worried about the fitment going back together, it appears from the videos I've studied buying the lcd/glass combo and taking time is the most critical step.
Besides. I've found white screens and a white battery cover! This is hot! I don't like the red buttons but they're better than the red side rails on the DNA. I don't mind losing wireless charging.
fr4nk1yn said:
I hate to say it but it's not worth $200. They can be found going for less than that on CL in my area .
I am worried about the fitment going back together, it appears from the videos I've studied buying the lcd/glass combo and taking time is the most critical step.
Besides. I've found white screens and a white battery cover! This is hot! I don't like the red buttons but they're better than the red side rails on the DNA. I don't mind losing wireless charging.
Click to expand...
Click to collapse
I must have this white screen/battery cover for my phone. Like time now hahaha.
croppz said:
I must have this white screen/battery cover for my phone. Like time now hahaha.
Click to expand...
Click to collapse
I know right.
Got the white lcd digitizer assembly from ebay. You must still separate the old lcd from the plastic housing. I used super glue to bond it. I love the white with black and am thinking of removing the red side grills.
krazya said:
Got the white lcd digitizer assembly from ebay. You must still separate the old lcd from the plastic housing. I used super glue to bond it. I love the white with black and am thinking of removing the red side grills.
Click to expand...
Click to collapse
If you don't mind losing the wireless charging apparently you can lose the red rails too.
I'm looking for all the bits to make it white. The sim tray and the ear piece insert are hiding from me.
I got lucky.. my screen was cracked too so I took it to my sisters friend shop and they charged me 50$. He ended up ordering the wrong part so he sent it to HTC and I got my phone back in a week. He felt bad about ordering the wrong part so he didn't charge me anything. Only bad thing is that the usb cover is ripped off
Sent from my HTC6435LVW using XDA Premium 4 mobile app
fr4nk1yn said:
DNA fell out my shirt pocket, landed on the edge and of course shattered. First drop ever.
There's glass on Amazon and ebay for about $15
Then there's glass and LCD together about $70
I've seen the videos and read the articles and they're somewhat conflicting?
How difficult is it realistically to change the screen myself AND get it back together.
I also had the idea of using it to a repair facility at the mall.
Question is address those prices reasonable for a quality screen?
What's the best way to fix the phone reasonably?
Click to expand...
Click to collapse
This may be in hindsight but your next phone purchase really should be at bestbuy if your in the states, and just buy the 2 yr black tie outright (its cheaper in the long run). It covers literally everything (even water damage), and will be replaced within 72 hrs most of the time, it is a refurb, but $0 deductible and no limit to amount of turn ins.
@jake.corey.jacobs I bought this off cl a couple months ago my Galaxy Nexus camera and CPU was showing its age taking and editing photos.
It's sounds stupid but in the last 3 years I've dropped my phone twice! I only have the "extended insurance" in case of a malfunction. I have full insurance my wife's and daughters lines.
fr4nk1yn said:
@jake.corey.jacobs I bought this off cl a couple months ago my Galaxy Nexus camera and CPU was showing its age taking and editing photos.
It's sounds stupid but in the last 3 years I've dropped my phone twice! I only have the "extended insurance" in case of a malfunction. I have full insurance my wife's and daughters lines.
Click to expand...
Click to collapse
All good, I use to be a GeekSquad agent and have to admit, their phone insurance is NOT a ripoff (like most of their services). So I always like to share the info about how the plans work for people who are drop happy.
krazya said:
Got the white lcd digitizer assembly from ebay. You must still separate the old lcd from the plastic housing. I used super glue to bond it. I love the white with black and am thinking of removing the red side grills.
Click to expand...
Click to collapse
I removed the side grills and the one in the ear peice up top a while ago. The removal of the side grills made for a better grip when running the phone naked IMO.
How hard was the switch from our screen to the white one?