So I bought the Skinomi Carbon Fiber skin and it applied nicely. Today I got my dock in the mail and it's a pretty tight fit. I was wondering if it's a tight fit in general or is it just because I have the Skinomi Skin applied.
Anyone else have the Skinomi Skin and the dock?
HuskerWebhead said:
So I bought the Skinomi Carbon Fiber skin and it applied nicely. Today I got my dock in the mail and it's a pretty tight fit. I was wondering if it's a tight fit in general or is it just because I have the Skinomi Skin applied.
Anyone else have the Skinomi Skin and the dock?
Click to expand...
Click to collapse
When and where did u order the dock from? Can u post pics of the fitment? I just installed the carbon fiber skin on mines last night. I'm still waiting on my dock from Amazon.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my Transformer Prime TF201 using Tapatalk
ryan562 said:
When and where did u order the dock from? Can u post pics of the fitment? I just installed the carbon fiber skin on mines last night. I'm still waiting on my dock from Amazon.
Sent from my Transformer Prime TF201 using Tapatalk
Click to expand...
Click to collapse
That looks sexy...
Sent from my Transformer Prime TF201 using xda premium
HuskerWebhead said:
So I bought the Skinomi Carbon Fiber skin and it applied nicely. Today I got my dock in the mail and it's a pretty tight fit. I was wondering if it's a tight fit in general or is it just because I have the Skinomi Skin applied.
Anyone else have the Skinomi Skin and the dock?
Click to expand...
Click to collapse
I do have the dock but I have not gotten that skin even though I've been thinking about it. Is it tight enough where it may mess up the skin?
ryan562 said:
I just installed the carbon fiber skin on mines last night.
Click to expand...
Click to collapse
That looks good! Is that the "regular" black Carbon Fiber skin, or the Silver Carbon Fiber skin?
I've had a black Skinomi carbon fiber skin on a Viewsonic gTablet, and it has held up quite well over 8 months, so I'm considering getting this for the slick Transformer Prime.
Gary_O said:
That looks good! Is that the "regular" black Carbon Fiber skin, or the Silver Carbon Fiber skin?
I've had a black Skinomi carbon fiber skin on a Viewsonic gTablet, and it has held up quite well over 8 months, so I'm considering getting this for the slick Transformer Prime.
Click to expand...
Click to collapse
i believe it is the regular black one. i didn't know they had a silver i would have jumped on that. i ordered mines from amazon as i used an amazon gift card to purchase the whole set which included the front clear protection.
i'm very surprised at how well it fits and feels. now i don't worry about it slipping out of my hands since it's rough and textured enough for gripping such a slim device that much easier to hold.
i am just worried about how it would fit with the keyboard dock per OP's concerns. amazon just emailed me and noted that my dock should get here by next wednesday. i would hate to take off such a nice guard if fitment doesn't hold up well with the dock.
ryan562 said:
i'm very surprised at how well it fits and feels. now i don't worry about it slipping out of my hands since it's rough and textured enough for gripping such a slim device that much easier to hold.
i am just worried about how it would fit with the keyboard dock per OP's concerns. amazon just emailed me and noted that my dock should get here by next wednesday. i would hate to take off such a nice guard if fitment doesn't hold up well with the dock.
Click to expand...
Click to collapse
Good to hear the carbon fiber skin helps with gripping the Prime.
After you get the dock, let us know how it fits and works with the dock. I notice there are thin strips of foam material on the inside of the dock hinge where the tablet is inserted, so hopefully inserting the dock will not scratch or catch on the carbon fiber skin.
I installed the skinomi full body yesterday and also have the keyboard dock. The tablet fits into the dock fine; however, I there are marks left on the skin due to contact with the dock. Ultimately, the rub marks don't bother me----the skin is very smooth and nice to touch. Just waiting for skinomi to make a skin for the keyboard...
Turns out for me, the problem was with the Skinomi screen protector. I noticed there were marks on the screen protector where it looked like it was catching. I pulled off the screen protector and it seems to fit better now. Sorry, I already yanked it off so I don't have pictures.
i have the clear skin and the dock and have not had any issues with it. it was a tight fit with or without the skin. I have had it in and out a couple times and have not had any problems.
hmmm...maybe it's just mine....or i'm just expecting a looser fit.
Does anyone else use the dock compatible skinomi and the dock? Just got mine today and I noticed that the locking mechanism does not slide all the way to the right when docked it just sits halfway...I noticed the cutouts on the skin don't seem to fully miss the edge of the dock..could this be why?
I have the full body skin - my tablet and dock are both covered front and back (but not the sides) with the clear skin.
I'm not sure where you mean that the cut outs on the skin don't miss the dock. The long curved like pieces at both sides of the bottom of the tablet? Mine seem fine. The tablet doesn't "hesitate" going in and it snaps in place just like before. I was gentle with it the first few times for fear of screwing up the skins if I didn't have it lined up right, but once I saw it seemed ok, I just went back after it with less worry now that I wont be scratching it by putting it on and off the dock!
I did however fail to pick up on the fact that it wasn't a real good idea to clam shell close the two of them together in the beginning - not real pretty trying to pull the two apart
thanks for the response, I just meant it looked like part of the cutout is slightly under the docking holder thing...does your lock mechanism click all the way to the right or is it just halfway like mine?
Sent from my Transformer Prime TF201 using xda premium
My switch was only going halfway the first few times i docked it.. Turns out, have to push harder.
I'm using the full back, and compatible screen.
Just try pushing it into the dock further to get the switch to click.
I have full carbon fiber skin, i applied it on both tablet and dock.
Now my tablet wont fit into dock, it just fit from one side, and lock just go to walf way... so i sent email to skinomi with pics and i got this reply:
Thank you for sending us pictures of the issue. I will be forwarding this message to our design team, so they can review and make any necessary changes. I hope you enjoy your replacement when it arrives and have a great day.
Click to expand...
Click to collapse
I have an issue where I originally had the skin on my dock... Now it appears to have stretched out the dock after I took the skin off before I sent it for repair!
It wobbles from side to side! Now I will have to put the protector back on or RMA my dock...
Sent from my PC36100 using Tapatalk
regalpimpin said:
My switch was only going halfway the first few times i docked it.. Turns out, have to push harder.
I'm using the full back, and compatible screen.
Just try pushing it into the dock further to get the switch to click.
Click to expand...
Click to collapse
This was my experience as well.
I have the clear skin, full body. Knowing the only thing I could screw up was the skin (which they would replace because it shouldn't screw up), I just pushed harder.
I don't have any marks on the dock or skin from where they join, despite having to push the first few times. I see what you mean by it looking like the back skin might go under/further down the backside of the backplate and into the back of the dock, but it must not because I don't' have any marks there at all.
Related
The Carbon fiber backing is decent, but the screen protector is garbage. One of the corners looks like it was hand cut, and the whole thing doesn't fit properly. If the protector is aligned properly to the camera and light sensor, the whole thing is shifted too far to the left, leaving about 5mm uncovered on the right, and the protector hanging over the left side of the tablet.
dave2g said:
The Carbon fiber backing is decent, but the screen protector is garbage. One of the corners looks like it was hand cut, and the whole thing doesn't fit properly. If the protector is aligned properly to the camera and light sensor, the whole thing is shifted too far to the left, leaving about 5mm uncovered on the right, and the protector hanging over the left side of the tablet.
Click to expand...
Click to collapse
really? you can't even tell that mine has the skinomi screen protector installed. There's a 1mm gap on left and .5mm gap on right side. Bottom and top are almost perfect.
Email them a picture they will mail you another on free of charge! Actually they will without the picture but the picture will help them to correct the issue
Sent from my PC36100 using Tapatalk
Could you post some pictures of the carbon fiber?
Sent from my VS910 4G using xda premium
I sent email to them about a dock carbon fiber skin and they should have one in a week or two
Sent from my HTC Vision using Tapatalk
dave2g said:
The Carbon fiber backing is decent, but the screen protector is garbage. One of the corners looks like it was hand cut, and the whole thing doesn't fit properly. If the protector is aligned properly to the camera and light sensor, the whole thing is shifted too far to the left, leaving about 5mm uncovered on the right, and the protector hanging over the left side of the tablet.
Click to expand...
Click to collapse
I will never buy another Skinomi screen protector, they're like memory foam... every time you touch the screen even lightly, it leaves a permanent imprint. They're terrible...
Sent from my GT-N7000 using xda premium
I just got mine, and for the most part it looks great. The corner pieces, however, weren't angled quite right so they ended up being wrinkled. I sent them an email to see if they can send me out some replacements. The cover still has a bunch of bubbles in it, but I know that takes a couple days to fully work out. I have one on my OG Transformer and it looks great.
HuskerWebhead said:
I just got mine, and for the most part it looks great. The corner pieces, however, weren't angled quite right so they ended up being wrinkled. I sent them an email to see if they can send me out some replacements. The cover still has a bunch of bubbles in it, but I know that takes a couple days to fully work out. I have one on my OG Transformer and it looks great.
Click to expand...
Click to collapse
you're supposed to install the corners with a blow dryer or heat gun. It's the only way to make it fit perfectly or else you have wrinkles. It's in the instructions video
Tried that, no dice. I'm missing pieces anyways. Hopefully they'll send out new ones.
Just installed mines. Not happy with it. Carbon fiber skin was already loose when I received the package. As others mentioned before, some areas are not cut out properly. Definitely not worth the money.
Going to wait a few more days to see how the screen protector holds up but not going to expect much.
It fits with the dock but I am not sure how much can the carbon fiber skin can take.
Hope SGP have something soon.
Again they have the best customer service and will send you more until you are satisfied!
Sent from my PC36100 using Tapatalk
Installed the carbon fiber skin and tech skin screen protector today. I't came out OK....
The Carbon fiber main piece on the back cover went on *slightly* skewed- did not notice until I put the trimmings on, and once the skin had stuck onto the metal backing, I was not gonna try and peel it back off- the adhesive is rather tough once it sticks onto the backplate. I used a hair Dryer on hot setting to soften the skin on the corners- they melted like jello and fit into the corners perfectly.
All, and all I am pretty satisfied with how it turned out... other than the slight skew all is well.
As for the screen protector, I drenched both sides with the solution and it went down like butter. No micro bubbles and it is only 1 hour after the install... there is still some solution underneath the skin, but I think it will clear up over a day or so. The alignment of the skin and the cutouts for the camera lined up without issue.
There is also what looks like a hairline scratch on the skin from when using the squeegee to remove the bubbles. You can see it when you look on an angle-
The website says the skin is self healing... Does anyone know if this will go away??
Edit: after some time I now see air bubbles and some streaks under the screen protector- It's not looking good at all- I hope all this will go away like they say within 3 days or I may have to remove it.
Update
mazjohn said:
Installed the carbon fiber skin and tech skin screen protector today. I't came out OK....
The Carbon fiber main piece on the back cover went on *slightly* skewed- did not notice until I put the trimmings on, and once the skin had stuck onto the metal backing, I was not gonna try and peel it back off- the adhesive is rather tough once it sticks onto the backplate. I used a hair Dryer on hot setting to soften the skin on the corners- they melted like jello and fit into the corners perfectly.
All, and all I am pretty satisfied with how it turned out... other than the slight skew all is well.
As for the screen protector, I drenched both sides with the solution and it went down like butter. No micro bubbles and it is only 1 hour after the install... there is still some solution underneath the skin, but I think it will clear up over a day or so. The alignment of the skin and the cutouts for the camera lined up without issue.
There is also what looks like a hairline scratch on the skin from when using the squeegee to remove the bubbles. You can see it when you look on an angle-
The website says the skin is self healing... Does anyone know if this will go away??
Edit: after some time I now see air bubbles and some streaks under the screen protector- It's not looking good at all- I hope all this will go away like they say within 3 days or I may have to remove it.
Click to expand...
Click to collapse
Ok, I just wanted to update the above post for others that are considering the Skinomi- 2 days later, it is better, but some imperfections remain.
Be patient... It will look really bad at first, and i hope screen will completely clear up over time. I kept mine turned off for 6 hours after applying. Good Luck to others!
I bought the dry screen protector and skin. Only installed the screen protector so far. It was hard to get just right because you don't get the sliding motion you get with wet. But I started at the top right corner, then laided enough to go to the bottom right, then peeled wax paper to lay across the screen. I was scared at first because I had a lot of bubbles. I use the card to get most of the bubbles out I could then said F It. Been one day so far and most (90%) of the bubbles are gone! I'm impressed. I see 2 spots where lint got under the screen but they are on the bezel. Camera and light sensor hole lined-up OK (a little off-centered to the left of hole but not obstructed by the protector at all.) Oh it's not a fingerprint magnet. May have them send ma another to try again.
Will try skin tonight
Sent from my Transformer Prime TF201
i personally love the carbon skin on mines. im actually surprised at how well the front clear protection looks. i can barely tell it is there. my only complaint of course is the two front camera holes.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my Samsung Galaxy S II t989
You covered the naff speaker grill with your thumb
Looks pretty good to me.
i thought i was the only one whom didnt like the screen protector.
but i hated the screen protector as so many bubbles never went away and you can feel the screen protector. (i did wait 3 days and only 5% of the bubbles went away)
the carbon cover does look good though, but the corners never stuck and are wrinkled. but they dont bother me.
Kreeeee said:
You covered the naff speaker grill with your thumb
Click to expand...
Click to collapse
Haha I didn't even know I did that thanks for pointing that out
Sent from my Transformer Prime TF201 using Tapatalk
kls629 said:
i thought i was the only one whom didnt like the screen protector.
but i hated the screen protector as so many bubbles never went away and you can feel the screen protector. (i did wait 3 days and only 5% of the bubbles went away)
the carbon cover does look good though, but the corners never stuck and are wrinkled. but they dont bother me.
Click to expand...
Click to collapse
I literally used the entire bottle of spray solution on the front screen protector before I applied it while it took me an hour lol or so to shimmy out the liquid solution bubbles and air pockets. Bubbles disappeared the next two days. I applied light heat gun usage over the corners as they melted in to place. PITA to do though
Sent from my Transformer Prime TF201 using Tapatalk
Hi everyone,
I purchased a Tab 7.7 last night from Craigslist for an unbelievable price so I've loaded up on accessories.
I ordered an OEM Samsung book style case from eBay since it was MUCH cheaper:
http://www.ebay.com/itm/23075711880...X:IT&_trksid=p3984.m1439.l2649#ht_7496wt_1270
For now, I'm using the slip cover case I used with my Nook Color. It fits in there perfectly. Amazing that this thing is thinner, lighter, and yet somehow still almost the same size as the Nook Color.
I also ordered a Skinomi carbon fiber skin:
http://www.skinomi.com/sk9340-samsung-galaxy-tab-7-7-carbon-fiber-skin-protector.html
The screen protector is hardly noticeable and doesn't affect the image quality. That's why I decided to order another one for my Tab. I did want to try getting the Brando matte screen protector, but I didn't want to risk having issues with image quality/rainbow effect.
I'll take pictures and review both when they come in the mail. It might be awhile for the case since it's shipping from China, but the Skinomi skin should be here next week.
EDIT: Case came in today. Pictures below.
I've read and seen a video showing that the OEM case is a tight fit and doesn't really work well with body skins, so we'll see. I'm not going to but the carbon fiber pieces on until the case arrives. If the edge pieces are separate from the back, then I'll go ahead and put the back on.
That's it for now.
EDIT: Skinomi skin arrived yesterday. The skin is cured enough to use, but as usual will continue to improve over the next week.
SKINOMI SKIN
Front
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Back
I cut off part of the corners in preparation for the case, but I still have the pieces if I wanted to attach them later. Normally the skin would go all the way down and wrap around the edge.
BOOK COVER
Packaging
Open w/out Tab
Closed w/out Tab
Bottom w/ Tab
It's a tight fit. The back skinomi skin peeled off in parts of the corners because it was such a tight fit! I didn't trim enough off.
Propped up angle 1
Propped up angle 2
Camera Cutout
It's a perfect fit!
Open flat
Open flap folded back
Open thickness compared to Nook Color
The book cover is a nice tight fit. Too tight if you have a skin of any kind on there, so either make sure you trim enough off or leave the skin off the back.
The material seems to be pretty nice so far. It's has a nice texture to it. It doesn't feel like cheap plastic. More like a blend of plastic can silicon/rubber. The fit an finish is mostly nice. The only complaint I have so far is the flap. The 3 magnets that are inside the flap aren't very strong so it barely holds the flap close and it doesn't close all that tight. I'm not sure how this compares to the case for the Tab 8.9/10.1 which are Samsung designs vs this KIRF case. It holds well enough.
Once the case is fully open, the flap folds all the way over and provides a nice grip on the left side if you're holding it in portrait mode. This makes the Tab a lot more comfortable to hold. It's still possible to lay the Tab flat if you just leave the flap hanging out.
There's a slot on the back of the case that allows the flap to fit into the slop to prop up the Tab. it's a nice angle but it's not adjustable and probably not solid enough to type on.
All in all, it's a pretty nice case. If the flap held closed more securely I'd say it's a near perfect case. As it is, I'd give this case an 8/10. It's a good value at less than $20.
I hope this was helpful for anyone considering this case.
the OEM case is not made by samsung right? this one has the typing angle and looks pretty good
K999rrl said:
the OEM case is not made by samsung right? this one has the typing angle and looks pretty good
Click to expand...
Click to collapse
Samsung does sell these officially. Here's one for the 8.9. The 7.7 doesn't have a good picture on their site:
http://www.samsung.com/us/mobile/galaxy-tab-accessories/EFC-1C9NBEGSTA
The one I got on eBay is either a knockoff or simply someone that is able to get them directly from the factory that makes them and sell them for cheap (very likely and hence OEM, original equipment manufacturer). After all, Samsung doesn't make the case themselves. They buy them from the Chinese just like everyone else.
It's hit or miss when getting stuff from these eBay stores, but I've had decent luck getting quality stuff.
I was definitely not ready to spend $50+ that Samsung wants for it.
To each their own, but there's no way that I would put a skin on the 7.7. It's just so nice as is with a regular cover.
I did have that same carbon fiber black Skinomi skin for my old Viewsonic gTab, and it was a definite improvement over the ugly back. But the 7.7 is so shiny...
Maverick777 said:
Samsung does sell these officially. Here's one for the 8.9. The 7.7 doesn't have a good picture on their site:
http://www.samsung.com/us/mobile/galaxy-tab-accessories/EFC-1C9NBEGSTA
Click to expand...
Click to collapse
The Samsung original book covers for the Tab 10.1 and Tab 8.9 are very similar, but the original one for the Tab 7.7 is a bit different.
The ones on eBay for the Tab 7.7 that look similar to the ones for the Tab 10.1/8.9 are knock-off's of the that original Samsung design.
I have one of these and despite not being up the quality of a Samsung original case, it's not too bad at all.
Updated OP with pics of the Skinomi skin installed.
i've also ordered the book flip case from your ebay link. cant wait!
have you received yours already? maybe some pics?
neonlite said:
i've also ordered the book flip case from your ebay link. cant wait!
have you received yours already? maybe some pics?
Click to expand...
Click to collapse
My case came in today! Updated the OP with pictures and impressions.
Maverick777 said:
My case came in today! Updated the OP with pictures and impressions.
Click to expand...
Click to collapse
Very nice! Also received mine from Ebay. The power and volume buttons are kinda covered tho
neonlite said:
Very nice! Also received mine from Ebay. The power and volume buttons are kinda covered tho
Click to expand...
Click to collapse
Yea. Looking at video reviews for the Tab 10.1 case and the design of ours, it looks like the Tab 7.7 is simply too thin for this case design to function quite as well.
The thinness of the 7.7 doesn't leave enough room for the buttons. They're not necessarily covered, but there's not enough room to comfortably use them. The thinness also causes the rubber feet on the back to be poorly placed. The Tab 10.1 is thick enough so that the rubber feet is almost on the side of the case so that when you prop it up on it's side, the rubber keeps the case from sliding. The Tab 7.7 is too thin and the rubber feet end up being more towards the back of the case so it doesn't stop the case from sliding nearly as well if at all.
I can see why Samsung designed a different official case.
I still really like the case. After leaving the case on it's flap overnight, the flap is laying down a lot better.
Maverick777 said:
Yea. Looking at video reviews for the Tab 10.1 case and the design of ours, it looks like the Tab 7.7 is simply too thin for this case design to function quite as well.
The thinness of the 7.7 doesn't leave enough room for the buttons. They're not necessarily covered, but there's not enough room to comfortably use them. The thinness also causes the rubber feet on the back to be poorly placed. The Tab 10.1 is thick enough so that the rubber feet is almost on the side of the case so that when you prop it up on it's side, the rubber keeps the case from sliding. The Tab 7.7 is too thin and the rubber feet end up being more towards the back of the case so it doesn't stop the case from sliding nearly as well if at all.
I can see why Samsung designed a different official case.
I still really like the case. After leaving the case on it's flap overnight, the flap is laying down a lot better.
Click to expand...
Click to collapse
ah that explains it. do you also notice that the tab is getting pretty hot while in the case? at least mine does, probably also because i keep playing a game which keeps the screen on for a pretty long time..
that is really good case cover compare to official one.
neonlite said:
ah that explains it. do you also notice that the tab is getting pretty hot while in the case? at least mine does, probably also because i keep playing a game which keeps the screen on for a pretty long time..
Click to expand...
Click to collapse
Yea. I notice that it does get a little warmer in the case. The metal back on the 7.7 basically functions as a heatsink. The case is probably trapping the heat that normally gets dissipated.
Got mine today here in Egypt directly from a Mobile Accessory shop , and it only cost around 25$, really this is a perfect fit for the 7.7
Thanks Maverick for this finding
Got the Skinomi skin, just put it on and it looks great I gave up on trying to put on the screen protector, i had a hard time trying to get the air bubbles out after 2 tries. Always had an issue with screen protectors on all my phones.
Using Galaxy Tab 7.7 P6800
How well do the magnets keep the flap closed? I'm debating between this case and the official book case without the magnetic flap. My thought is that if the magnet doesn't really keep it closed, might as well just get the case with no flap? Just want to hear thoughts from people who have this case. Thanks!
So, I bought and finally received the case that the OP posted pics of and must say I am very pleased with it. Far exceeded my expectations. Looks sleek and fits well. My only initial concern was with the magnets not holding in place, but they hold up enough to keep it from opening which is what I wanted.
9 out of 10
cthang said:
So, I bought and finally received the case that the OP posted pics of and must say I am very pleased with it. Far exceeded my expectations. Looks sleek and fits well. My only initial concern was with the magnets not holding in place, but they hold up enough to keep it from opening which is what I wanted.
9 out of 10
Click to expand...
Click to collapse
Glad it worked out. Yes the magnets are just enough to hold the flap closed. I still like the case quite a bit. Definitely a keeper.
Like the title says. How well does it work with a stylus? How does it feel vs just the glass? I have my prime in the MiniSuit case, is it worth putting on the screen?
I have a Skinomi skin cover and I honestly think the best part may be how much better the Prime looks. It gives it this glossy "wet" look that you see on new cars that have just been freshly waxed and polished. That aside, I would still recommend it if you're looking to use the Prime outside of a cover. I've found that the metallic spun back can scratch rather easily so the screen cover helps protect against that, and it has a nice, semi-grippy feel when you hold it.
Techskin (Wet application) is great for the back. Again, a must if you use the tablet outside of a "proper" case, to prevent the metal from getting scratched.
The front.....definitely reduces clarity some. You may get some micro-bubbles or other artifacts while installing, but the warranty will allow you to get a replacement if you screw it up (I did the first time, ended up with a couple blotches of micro-bubbles).
The protector definitely provides some more resistance while sliding the finger, not quite as smooth as without.
I plan to use it for a while, but maybe 6-12 months down the road i'll remove it when it gets a little worn and go "au natural". A back cover and a neoprene sleeve for transport is all i need.
http://www.amazon.com/Neo-Cushion-Protective-Transformer-Android-Tablets/dp/B006C64C6E
Really nice sleeve, it could use a bit of velcro to keep the fold from crinkling up. Nice front pocket for carrying the charger, or wires.
I ordered and installed the Skinomi Techskin. It went on perfectly, no bubbles, lined up precisely...
Only problem was, there were smudge marks and blemishes all over the screen! I waited a week, hoping they'd go away, but they didn't.
I eventually contacted Skinomi, who were very accommodating, and sent out another Techskin right away.
2nd skin didn't go on as easily. I have several bubbles, but what's more irritating is there's a crease/bubble along the edge of the screen, that won't go away! I even saw it while applying the screen shield, lifted that corner back up, re-sprayed the included liquid, and squeegeed it smooth, but it is still there, and very noticeable.
What I like about the Skinomi is the precise cut-out for the dock. However, if it makes my screen look filthy, it isn't working for my needs (I mainly purchased a screen protector because all of the fingerprints that show up on the Prime's screen drive me nuts (yeah, yeah.. I know)
Anyways, I've now ordered the ACaseView screen protector.
Comes in a package of three, but what attracted me to it is that the manufacturer and customers all say how thin it is. Several reviews say that they have no problems using their dock with this screen protector on, that it's thin enough not to interfere.
It's also a dry apply screen protector, not that I care that much about how it's applied, I just don't want to see bubbles or smudges on my nearly brand new Transformer Prime!
If anyone's interested, I'd be happy to report back, after installing the ACaseView shield.
I got the skinomi as well for the prime and dock. I love it. I have used body guardz for two phones and ghost armor for my wifes iPad. Of them all I have found the Skinomi to be the most glass like out of the box. They will be the one I buy going forward for all my future gear.
I prefer the wet apply versus dry. It allows you to place the skin down and easily adjust got proper placement. With the dry apply you have to keep purling back up to adjust, leaving you open for dust and stretching. The bubbles do go away. Sometimes it may take a week, or longer. Hope that helps.
Sent from my PG86100 using xda premium
Skinomi has great products with top notch customer service!
Im about to get the Full Skinomi thingy, for the whole Tablet and the keyboard.
After a few months my HP DV6 ended up like this (Alu palm rests) due to my palms sweat :/
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I really dont want my Primes Keyboard looking like that, and even less the back of the tablet!
And yes, that was made by sweat, I wear no watch, or anything on my wrists.
Anyone happen to know if the Skinomi for the screen can cover up light Scratches that are already on the screen?
Zephyrot said:
Im about to get the Full Skinomi thingy, for the whole Tablet and the keyboard.
After a few months my HP DV6 ended up like this (Alu palm rests) due to my palms sweat :/
I really dont want my Primes Keyboard looking like that, and even less the back of the tablet!
And yes, that was made by sweat, I wear no watch, or anything on my wrists.
Anyone happen to know if the Skinomi for the screen can cover up light Scratches that are already on the screen?
Click to expand...
Click to collapse
great choice on the dock and tablet combo, I've had it for a few weeks and its been great (dark wood version)
im not sure about the covering scratches though since one of the main things the companies want to accomplish are having the protectors as invisible as possible as to not hinder the use of your screen so I'm assuming they would still show. I have a protector on my screen but i have no scratches since i wouldn't even take my dock or tab out of the box before my skins arrived lol I'm sort of a freak when it comes to scratching my "toys".
Sent from my Transformer Prime TF201 using XDA Premium HD app
collinsac24 said:
great choice on the dock and tablet combo, I've had it for a few weeks and its been great (dark wood version)
im not sure about the covering scratches though since one of the main things the companies want to accomplish are having the protectors as invisible as possible as to not hinder the use of your screen so I'm assuming they would still show. I have a protector on my screen but i have no scratches since i wouldn't even take my dock or tab out of the box before my skins arrived lol I'm sort of a freak when it comes to scratching my "toys".
Sent from my Transformer Prime TF201 using XDA Premium HD app
Click to expand...
Click to collapse
I just ordered it, I hope it makes them at least harder to see hehe.
Weird thing is, my Prime never goes out without the Leather Folio case or if I need the Dock in a Neopren pouch, I just have no freaking idea how the screen got scratched! I guess the Glass used in the Prime is not so hard after all (at least compared to my other devices... 100% naked, no scratchs, more than a year of use and abuse)
Will report back how it feels after I get it... I guess a couple weeks from now
Scumbag Inc. said:
Like the title says. How well does it work with a stylus? How does it feel vs just the glass? I have my prime in the MiniSuit case, is it worth putting on the screen?
Click to expand...
Click to collapse
Not it is not worth putting on the screen, IMO. It can negatively impact how how well a stylus works with the Prime depending on the type of stylus since it is a little bit rubbery (but not as bad as Zagg skins).
The Skinomi skins for the back of the Prime and the keyboard dock are awesome though. They can definitely help your device from accumulating scratches and make it a lot easier to remove fingerprints from the back of the Prime.
Zephyrot said:
Anyone happen to know if the Skinomi for the screen can cover up light Scratches that are already on the screen?
Click to expand...
Click to collapse
I use a Skinomi screen protector (wet-apply). Before applying I had accidentally made light scratches to the TF201 screen. It was quite visible given certain lighting. After applying the Skinomi, (and its been about 2 months) I honestly cannot see even the slightest bit of the scratches as if they disappeared. I assume the same thing happens with any screen protector though.
originalnabisco said:
I use a Skinomi screen protector (wet-apply). Before applying I had accidentally made light scratches to the TF201 screen. It was quite visible given certain lighting. After applying the Skinomi, (and its been about 2 months) I honestly cannot see even the slightest bit of the scratches as if they disappeared. I assume the same thing happens with any screen protector though.
Click to expand...
Click to collapse
Awesome, that's what I was expecting. There a couple of scratches that can only be seen under the right angle with the right lighting.
Can't wait for the full Skinomi to arrive @[email protected]
I think bestskinsever has a better cutout for the back. And they even carry the dock, and compatible skins now.
I'm using a skinomi compatible screen protector, as that was the only one available at the time, coupled with the back from a bestskinsever.
The bestskinsever skin actually covers the full back, doesnt have a cutout for the Asus logo, and none of the little side pieces, as they are actually a part of the back.
If you look at the renderings on both sites you will see what i mean.
My dark woodgrain skinomi is supposed to arrive today or tomorrow. Can't wait!
Skinomi arrived today...but they sent me the wrong one. Got brushed aluminum instead of dark wood grain .
On the up side, when I e-mailed them they got back to me within minutes to apologize and say they were sending out the correct one.
regalpimpin said:
I think bestskinsever has a better cutout for the back. And they even carry the dock, and compatible skins now.
I'm using a skinomi compatible screen protector, as that was the only one available at the time, coupled with the back from a bestskinsever.
The bestskinsever skin actually covers the full back, doesnt have a cutout for the Asus logo, and none of the little side pieces, as they are actually a part of the back.
If you look at the renderings on both sites you will see what i mean.
Click to expand...
Click to collapse
Skinomi also offers skins that work with the TF Prime keyboard dock.
almightywhacko said:
Skinomi also offers skins that work with the TF Prime keyboard dock.
Click to expand...
Click to collapse
Yes, they both offer compatible skins, but the BestSkinsEver version has a better back and no side pieces.
When you get the full skin from skinomi you have the screen, the back, and what.. 4 or 5 side pieces.
The BSE has front and back,and the back covers what all those little side pieces cover, plus the asus logo isn't cut out.
I like to use the full back, and a compatible screen protector. Fits in the dock without leaving marks or tearing them up and the full back is protected.
The Grey Elf said:
Skinomi arrived today...but they sent me the wrong one. Got brushed aluminum instead of dark wood grain .
On the up side, when I e-mailed them they got back to me within minutes to apologize and say they were sending out the correct one.
Click to expand...
Click to collapse
yea from what ive read and heard they have great customer service, but i haven't had to deal with them yet
Sent from my Transformer Prime TF201 using XDA Premium HD app
regalpimpin said:
Yes, they both offer compatible skins, but the BestSkinsEver version has a better back and no side pieces.
When you get the full skin from skinomi you have the screen, the back, and what.. 4 or 5 side pieces.
The BSE has front and back,and the back covers what all those little side pieces cover, plus the asus logo isn't cut out.
I like to use the full back, and a compatible screen protector. Fits in the dock without leaving marks or tearing them up and the full back is protected.
Click to expand...
Click to collapse
"better" in your opinion, its just a preference. there isn't any real difference that makes one better than the other.
Sent from my Transformer Prime TF201 using XDA Premium HD app
I love my Skinomi Carbon Fiber back cover. It was easy to apply. There are others that don't have the small strips that go around the sides of the tablet but if you take your time and use light heat you can get these pieces on nicely and they look great.
I've yet to put the screen protector that came with my kit on because I'm never satisfied with the results that I've had on other devices. I'm just running it naked.
Hey guys, I have been looking for a case for my prime for around two weeks, I want the case to be thin and not add too much bulk to the tablet.
I really like the Poetic Hardback case because it's thin and doesn't cover up the bezel, but I've read that the clips could scratch the tablet itself.
If you have a case idea for me I would greatly appreciate the recommendations.
Thanks,
This question has been asked a million times, but personally I like the Sikai Microfiber Case. It is super thin, light, comfortable to hold and looks professional.
http://www.ebay.com/itm/Sikai-ASUS-...612012?pt=PDA_Accessories&hash=item27c6a7d3ac
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Some people don't like that it has material over the bezel, and at first I was skeptical however it really does make your grip more secure on the Prime compared to bare glass. And while the edges might look sharp they are actually very soft.
I concur on the Sikai Microfiber Case. Very thin and light (only 5.5 ounces), yet protects the case and screen well. I don't particularly care for leather cases, and the microfiber is smooth yet provides good grip.
I also have the Poetic, and have not noticed it scratching the tablet, although it is a bit of a tight fit into sliding it under the clips. One complaint about the Poetic is that after a while the leather loosened up, so that when you placed it in the angled position the tablet slipped out of the grooves in the stand (very annoying). Poetic weighs in at 9.5 ounces.
The Caseen Skinny case is worth considering if you like a leather case. Weighs in at 10 ounces, and provides very good protection and allows landscape or portrait angled stand. One complaint is that the stylus / pen strap is too tight, and difficult to get the stylus in.
I have used the ACASE since early January and love it. It is leather, fitted well and looks great. I believe I paid about $13 for it on ebay.
I just got the Sikai microfiber and I love it.
Sent from my Transformer Prime TF201 using xda premium
I also have the Sikai microfiber case and prefer it over my other case. It is light, fits well, looks good and functions the way I want it,
I use a not so fancy Roocase. It is both a leather skin for the tablet and allows for it to be propped up, like an easel. The dual function aspect adds some thickness but personally, I don't find it an issue.
Do they have any other colors of that sikai case? Yours looks a little amethyst grayish but all I could find was black. Also does anyone not from china sell this thing? I'm trying to get it a little faster than 20 business days hahaha
Sent from my Transformer Prime TF201 using XDA
As far as I know it only comes in one colour. The black which is kind of greyish.
I can't help you with an alternate seller. I had to wait awhile for my case to arrive, but it was worth the wait.
Sent from my GT-I9100 using Xparent ICS Blue Tapatalk 2
wwr8bz said:
Do they have any other colors of that sikai case? Yours looks a little amethyst grayish but all I could find was black. Also does anyone not from china sell this thing? I'm trying to get it a little faster than 20 business days hahaha
Sent from my Transformer Prime TF201 using XDA
Click to expand...
Click to collapse
As far as I know it only comes in matte black.
Also, I don't remember mine taking 20 business days to show up. It was closer to 2 weeks.
A reseller has them on Amazon, and it says that they ship from California, so it might be a little faster.
http://www.amazon.com/gp/offer-listing/B007XMPZDA/ref=dp_olp_new_mbc?ie=UTF8&condition=new
almightywhacko said:
This question has been asked a million times, but personally I like the Sikai Microfiber Case. It is super thin, light, comfortable to hold and looks professional.
http://www.ebay.com/itm/Sikai-ASUS-...612012?pt=PDA_Accessories&hash=item27c6a7d3ac
Some people don't like that it has material over the bezel, and at first I was skeptical however it really does make your grip more secure on the Prime compared to bare glass. And while the edges might look sharp they are actually very soft.
Click to expand...
Click to collapse
Can the little stylus holder on the back come off?
acdcking12345 said:
Can the little stylus holder on the back come off?
Click to expand...
Click to collapse
Not easily, as the little stylus holder is sewn into the lip of the case and then heat-sealed over. I guess you could cut it off with sharp scissors or a knife however why would you want to do that? It is actually quite handy if you ever use a stylus and when there is no stylus there is isn't noticeable since it lays flat against the edge of the case.
Does this case have the magnets on it to keep it closed?
crystalstylez said:
Does this case have the magnets on it to keep it closed?
Click to expand...
Click to collapse
Yes, but the magnets don't shut the Prime off they just hold the cover in place.
almightywhacko said:
Yes, but the magnets don't shut the Prime off they just hold the cover in place.
Click to expand...
Click to collapse
yes I know as I have had 2 ipads and know the tech behind how it works. Also currently have a leather case for the prime now with the magnets.
Thanks for the answer back. I'm probably going to buy this today.
crystalstylez said:
yes I know as I have had 2 ipads and know the tech behind how it works. Also currently have a leather case for the prime now with the magnets.
Thanks for the answer back. I'm probably going to buy this today.
Click to expand...
Click to collapse
The Prime actually does have a magnetic switch that can turn the Prime off by passing a magnet over it. It is just to the right of the camera, and down about an inch, behind the screen. However this magnetic switch is only enabled when the Prime is docked with its keyboard.
I have been using this case for about a month and a half now, and it provides great protection for the Prime, looks modern and stylish and feels comfortable to hold. Honestly I am not sure what else you would want from a case
just got the Sikai Microfiber Case in the mail today. I like it. It is certainly nice. But what I am not too excited over is the way that the prime is upside down when you use the case as a stand...Not crazy about that..But otherwise, is very nice..
Bought one of these too. Been looking for a nice case for six months now. Very happy with this.
acdcking12345 said:
just got the Sikai Microfiber Case in the mail today. I like it. It is certainly nice. But what I am not too excited over is the way that the prime is upside down when you use the case as a stand...Not crazy about that..But otherwise, is very nice..
Click to expand...
Click to collapse
Yeah I did think the was a bot odd at first, but it makes sense now. The only thing upside down really is the volume rocker. I never use it in this arrangement anyway.
If I want it stood up for watching videos etc, I stand it up the other way round, it like this -
(excuse the ipad photo and wrong case, but you get my point)
I got one of those leather thin cases, they are ok, but I just didn't like the feel of it, and the Prime just did not feel as awesome as using it naked.
So I ended up getting a Full Body Skinomi (Tablet + Dock) and the Asus Transleve and ohboy I'm happy with it.
The Skinomi is freaking awesome, the Tablet looks like just waxed Porsche, and the Asus Transleeve works wonders.
Been using this setup for some time now and I doubt ill use again my leather case ^^
Zephyrot said:
I got one of those leather thin cases, they are ok, but I just didn't like the feel of it, and the Prime just did not feel as awesome as using it naked.
So I ended up getting a Full Body Skinomi (Tablet + Dock) and the Asus Transleve and ohboy I'm happy with it.
The Skinomi is freaking awesome, the Tablet looks like just waxed Porsche, and the Asus Transleeve works wonders.
Been using this setup for some time now and I doubt ill use again my leather case ^^
Click to expand...
Click to collapse
I have a full body Skinomi skin on my Prime as well:
Sadly the Skinomi skin doesn't make the Prime more comfortable to hold, the sharp edges of the Prime still dig into your hands when you hold it for a while. Also the Skinomi skin, while excellent protection from scratches doesn't protect against drops at all.
Now that we have have all of our own forums I figured we'd get this one started.
The cases showed up for my fones the other day, the phone yesterday, but I'm still 800 miles away.
The phone in the picture is my wifes T Mobile Samsung Galaxy Note 2 in a Seidio case.
Fintie LG G3 Case - Guardian Series Dual Layer Holster with Kickstand and Belt Swivel Clip for LG G3 2014 - Red by Fintie http://www.amazon.com/dp/B00KL80TDO/
Hyperion Titan 2-piece Premium Hybrid Protective Case / Cover for L... http://www.amazon.com/dp/B00JPL5LW2/
Hyperion Titan 2-piece Premium Hybrid Protective Case / Cover for L... http://www.amazon.com/dp/B00JPL5LW2/
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
IMO the spigen slim armor case is probably the nicest, slimmest, case there is while still protecting your phone... I love mine. I bought a white phone and wanted to stay with white
Is there a difference between international versions and the US versions with theses cases? Like not having certain holes cut out for antennae placement
joemagistro said:
IMO the spigen slim armor case is probably the nicest, slimmest, case there is while still protecting your phone... I love mine. I bought a white phone and wanted to stay with white
Click to expand...
Click to collapse
Agreed. I bought the gunmetal one for my black G3 and couldn't be happier. True to form, I dropped it last night (grumble grumble) and though the case got a tiny bit scuffed on the tumble/slide across the concrete, the phone is unaffected.
kpantz said:
Agreed. I bought the gunmetal one for my black G3 and couldn't be happier. True to form, I dropped it last night (grumble grumble) and though the case got a tiny bit scuffed on the tumble/slide across the concrete, the phone is unaffected.
Click to expand...
Click to collapse
Gun metal one here too. Looks great. I still can't believe how light this phone is even with a case
Sent from my VS985 4G using Tapatalk
And THIN! My G3 doesn't feel any thicker than without it, and didn't lose that great stock feel the G3 has.
I'm really REALLy digging these Hyperion Titan cases. I'll have to do a review on one in a few days. Really great fit.
How much bulk does that hyperion add?
Almost none. Let me get my calipers...
According to my digital calipers, the stock devices 9.76 mm. With the case it is 13 mm.
3.24mm thicker with the case. The front lip that protects the face is probably half of that.
Here's more pics...
I just ordered the spigon hybrid case with the clear back. I'm pretty careful with my phone do don't really need a super bulky one. Here's 2 links for sites with various case for people that are interested.
http://www.mobilefun.co.uk/cat/G3-Cases.htm
http://g3cases.com/
RED ZMAN said:
According to my digital calipers, the stock devices 9.76 mm. With the case it is 13 mm.
3.24mm thicker with the case. The front lip that protects the face is probably half of that.
Here's more pics...
Click to expand...
Click to collapse
Thank you for the extensive pictures. I'm debating between this one and the Spigen Slim Armor. Main thing I like in the Spigen is the little bit of plastic it puts between the volume up and the camera lens, I find myself hitting the lens by mistake a lot and I think this would help me find the volume better.
LG shows a nice looking Slim leather case but I don't see it for sale anywhere.
http://www.lg.com/uk/lg-g3/e_accessories
RED ZMAN said:
I'm really REALLy digging these Hyperion Titan cases. I'll have to do a review on one in a few days. Really great fit.
Click to expand...
Click to collapse
This might be an unanswerable question, but how sturdy is the color on the hard frame? A long time ago I had a case like this for my S3 and within a month the color on the corners of the hard plastic was starting to wear off. I've since then only used cases where the soft portion has color and the hard part is black or white.
Otherwise I've been eyeballing the Hyperion cases since they started showing up online. I like how slim they are and how they maintain the back curve of the phone.
bobbarker2 said:
Thank you for the extensive pictures. I'm debating between this one and the Spigen Slim Armor. Main thing I like in the Spigen is the little bit of plastic it puts between the volume up and the camera lens, I find myself hitting the lens by mistake a lot and I think this would help me find the volume better.
Click to expand...
Click to collapse
Thanks button is for thanks man. Not an issue, folks here help me all the time, I like to help back.
I can see a thin part like that being helpful, but this looks great. BTW, I JUST noticed there is a plastic cover on the power button and volume buttons I didn't peel off. How did they ever expect anyone to notice that? Much better now!
To find the volume button I put my finger on the power button and slide up.
postal302 said:
This might be an unanswerable question, but how sturdy is the color on the hard frame? A long time ago I had a case like this for my S3 and within a month the color on the corners of the hard plastic was starting to wear off. I've since then only used cases where the soft portion has color and the hard part is black or white.
Otherwise I've been eyeballing the Hyperion cases since they started showing up online. I like how slim they are and how they maintain the back curve of the phone.
Click to expand...
Click to collapse
Seems pretty frigging sturdy. I don't think it is painted, I think thats actually colored plastic. I've got mine in a cheap holster (see the nasty red case in my first post) and no issues at all yet. I'll keep you all up to date though.
Juswanted to say, I got the Spigen Slim Armor in gunmetal from amazon for 17.99 i think? came fast.. and its been great. I'm not a fan of big cases.. and this one stays pretty true to form.. I wish i could bareback it with nothing cuz the thing looks great by itself.. but, ya know
---------- Post added at 12:41 PM ---------- Previous post was at 12:35 PM ----------
hawkswind1 said:
LG shows a nice looking Slim leather case but I don't see it for sale anywhere.
Click to expand...
Click to collapse
wow.. some nice accessories there.. but it's like going to the dealer for an oil change.. i can't do it... ha
RED ZMAN said:
Thanks button is for thanks man. Not an issue, folks here help me all the time, I like to help back.
I can see a thin part like that being helpful, but this looks great. BTW, I JUST noticed there is a plastic cover on the power button and volume buttons I didn't peel off. How did they ever expect anyone to notice that? Much better now!
Click to expand...
Click to collapse
Wow still had mine on too.
Well holy crap. LOL I posted a thread about it in General. Much nicer feel now!
anyone know anything bout these cases. i like to throw my phone sometimes and i need protection
http://www.ebay.com/itm/261523444054?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649
neckbonest said:
anyone know anything bout these cases. i like to throw my phone sometimes and i need protection
http://www.ebay.com/itm/261523444054?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649
Click to expand...
Click to collapse
Some users are discussing it here
So far I've tested the Spigen Slim Armour and the Cruzerlite TPU. The slim amour does do a better job of protecting the phone but I'm finding the plastic back to be to slippery for my taste one handed, where the cruzerlite doesn't slip at all but also doesn't protect as we'll.
Sent from my VS985 4G using XDA Premium 4 mobile app