I have searched the forum and cant find this basic answer. How do I load skinny4g via boot strap? I rooted my phone, but it is still locked because I dont want to loose 4G. Can I revert back to stock rooted if I dont like skinny 4G?
Sorry that I am so clueless. I recently traded in my Epic 4G and am still learning how to handle the MoPho! Thanks!
You can still use skinny4g with 4g working, for other roms that are "unlocked" you need to have an unlocked device. Id suggest getting cmw on your device (its in android development somewhere) and using that to flash skinny4g, atleast thats what I did. Dont flash any other roms unless they say they are locked or youve unlocked your device
Sent from my MB855 using xda premium
Cool. I just install CWM. I will give it a shot. Does Skinny4G boost performance or is it just visual tweaks. Thanks!
chrylaser said:
Cool. I just install CWM. I will give it a shot. Does Skinny4G boost performance or is it just visual tweaks. Thanks!
Click to expand...
Click to collapse
Skinny 4G is extremely fast and tweaked. You need to the bootstrap version
FIRSTLY
The gist is you will want to use RSD light have the SBF file and then flash it . Make sure battery is greater than 50 percent charged.
Download RSD Lite and 198_7 SBF from.
http://www.holylivingfuck.com/ACS/SBFs/
You should read this thread on more information about 198_7
http://forum.xda-developers.com/showthread.php?t=1202666
Make sure you have proper USB drivers for OS 64 or 32 bit installed, install RSD lite and follow the directions below.
Make sure your battery is greater than 50percent before doing any of this.
1) Fire off RSD lite, select the SBF you need 198_7 .
2) Hold down power and vol up till RSD mode comes up
3) Plug into usb then start the flashing sequence.. ( the whole process will take a while)
4) The process is done when RSD lite says manually power up the phone.. You may need to take the back off and pull the battery to restart it incase it doesnt power up on its own.
SECONDLY
How to install the bootstrap.
http://www.youtube.com/watch?v=ktyrF0M91eY&feature=relmfu
You need to install the Bootstrap apk. You can get it from here.
http://www.bandbinnovations.com/xda/DX2/Bootstrap_signed.apk
Information on bootstrap can be found here
http://forum.xda-developers.com/showthread.php?t=1199405
http://briefmobile.com/motorola-photon-4g-root-custom-recovery-now-available
Get Jokers 4G locked ROM from here.
http://forum.xda-developers.com/showthread.php?t=1331648
To install the rom you need to place it in your external sd card.
Run the bootstrap and then apply it. You will need to whipe the cache and clear dalvik cache before applying the ROM.
Good luck.
Hey everyone. I'm brand new to the Mopho world and i was just curious about a few things.
I see that rooting and unlocking breaks the 4g on the device and so far, i've only come across skinny4G's rom that keeps 4g intact. Why can't the same method that's used with skinny be applied to a CM7 or CM9 rom?
Just wanna get my bearings before I jump into this. I'm coming from a year and a half of moding the OG Evo. Just felt that it was time to move on. All explanations are welcome!
I DL'ed RSD Lite, when I put my phjone into RSD protocol and connect it to my PC RSD lite doesnt recognize it. Any ideas on what is wrong? Thanks!
ScottieRotten said:
FIRSTLY
The gist is you will want to use RSD light have the SBF file and then flash it . Make sure battery is greater than 50 percent charged.
Download RSD Lite and 198_7 SBF from.
http://www.holylivingfuck.com/ACS/SBFs/
You should read this thread on more information about 198_7
http://forum.xda-developers.com/showthread.php?t=1202666
Make sure you have proper USB drivers for OS 64 or 32 bit installed, install RSD lite and follow the directions below.
Make sure your battery is greater than 50percent before doing any of this.
1) Fire off RSD lite, select the SBF you need 198_7 .
2) Hold down power and vol up till RSD mode comes up
3) Plug into usb then start the flashing sequence.. ( the whole process will take a while)
4) The process is done when RSD lite says manually power up the phone.. You may need to take the back off and pull the battery to restart it incase it doesnt power up on its own.
SECONDLY
How to install the bootstrap.
http://www.youtube.com/watch?v=ktyrF0M91eY&feature=relmfu
You need to install the Bootstrap apk. You can get it from here.
http://www.bandbinnovations.com/xda/DX2/Bootstrap_signed.apk
Information on bootstrap can be found here
http://forum.xda-developers.com/showthread.php?t=1199405
http://briefmobile.com/motorola-photon-4g-root-custom-recovery-now-available
Get Jokers 4G locked ROM from here.
http://forum.xda-developers.com/showthread.php?t=1331648
To install the rom you need to place it in your external sd card.
Run the bootstrap and then apply it. You will need to whipe the cache and clear dalvik cache before applying the ROM.
Good luck.
Click to expand...
Click to collapse
You didn't install the USB drivers? For the phone?
chrylaser said:
I DL'ed RSD Lite, when I put my phjone into RSD protocol and connect it to my PC RSD lite doesnt recognize it. Any ideas on what is wrong? Thanks!
Click to expand...
Click to collapse
---------- Post added at 03:49 PM ---------- Previous post was at 03:47 PM ----------
4G skinny its using stock kernel.. Locked bootloader far as I know would puke due to the custom kernel from cm7/9
too758 said:
Hey everyone. I'm brand new to the Mopho world and i was just curious about a few things.
I see that rooting and unlocking breaks the 4g on the device and so far, i've only come across skinny4G's rom that keeps 4g intact. Why can't the same method that's used with skinny be applied to a CM7 or CM9 rom?
Just wanna get my bearings before I jump into this. I'm coming from a year and a half of moding the OG Evo. Just felt that it was time to move on. All explanations are welcome!
Click to expand...
Click to collapse
I needed the USB driver thanks!
too758 said:
Hey everyone. I'm brand new to the Mopho world and i was just curious about a few things.
I see that rooting and unlocking breaks the 4g on the device and so far, i've only come across skinny4G's rom that keeps 4g intact. Why can't the same method that's used with skinny be applied to a CM7 or CM9 rom?
Just wanna get my bearings before I jump into this. I'm coming from a year and a half of moding the OG Evo. Just felt that it was time to move on. All explanations are welcome!
Click to expand...
Click to collapse
Rooting does not break 4g, only unlocking, and skinny 4g is an locked only rom to be flashed via bootstrap versus clockwork
Sent from my MB855 using XDA Premium App
Mirror for bootstrap skinny4g?
I think this is the only rom that has yet to be mirrored since Megaupload went under. Can anyone post a mirror or link? Jokersax11? Im too green to post in the dev thread..
First post here in xda, have done plenty of research. Getting my photon monday, gonna start with locked roms first, skinny then rocko... wanna test out 4g here in nyc, then unlock n move over to ICS once its in beta and that camera gets working.
Lemme see if I can upload it to box.
Sent from my MB855 using Tapatalk
Dammit. 124 meg is too big for a box upload.
Sent from my MB855 using Tapatalk
I'm currently in the process of setting up my own hosting/website. Everything of mine will be on there along with several special things.
NotoriousBOX said:
I think this is the only rom that has yet to be mirrored since Megaupload went under. Can anyone post a mirror or link? Jokersax11? Im too green to post in the dev thread..
First post here in xda, have done plenty of research. Getting my photon monday, gonna start with locked roms first, skinny then rocko... wanna test out 4g here in nyc, then unlock n move over to ICS once its in beta and that camera gets working.
Click to expand...
Click to collapse
Sent from my MB855 using XDA App
jokersax11 said:
I'm currently in the process of setting up my own hosting/website. Everything of mine will be on there along with several special things.
Sent from my MB855 using XDA App
Click to expand...
Click to collapse
Awesome, ill be checking cm9 dev thread regularly, no need to come here to post it. Thanks for everything.
cannot get bootstrap_signed.apk
file not found
Best regards,
-boggsie
Skinny4g
Rob the plumber said:
Dammit. 124 meg is too big for a box upload.
Sent from my MB855 using Tapatalk
Click to expand...
Click to collapse
I read that you werent able to upload to dropbox because of file size. i have used several roms and i love them but i finally have 4g in my area. with that being said i flash sbf, rerooted, but cant find any working links for skinny4g locked rom. i was wondering if you can email it to me if you still have it. [email protected]
thanks
Related
So,just got my atrix and it is already on 1.8.3. Does that mean I should go ahead,unlock bootloader,root,flash cwm, then 2.3.4?
Sent from my MB860 using XDA Premium App
I definitely would recommend rooting it and installing Cupcake. I just got a MyTouch 4G a couple of weeks ago and I can't wait to root it (I just haven't had time yet). I'm so sick of all the crap that T-Mobile put on it. In addition, I think that's the key to getting better battery life out of it (though this is my first Android device so I'm not sure about that yet).
You can it all depends on what you want i wouldnt unlock it unless you are more
than just a normal user or it really wont mean much to you unless you like flashing.
Xenocyde said:
You can it all depends on what you want i wouldnt unlock it unless you are more
than just a normal user or it really wont mean much to you unless you like flashing.
Click to expand...
Click to collapse
Im way more than a normal user lol. And plus I want the newer moto launched. So,its safe to proceed with that proccess?
Sent from my MB860 using XDA Premium App
Yes , prior to doing ANY thing I would reflash 1.2.6 ota to 1.8.3
Then RSD pudding ( unlock for atrix )
Then install CWM ( Clock work mod )
then install Kenneth Beta #4 rom for gingerbread with is a stock rom with
root and a dedoxed system ( faster ).
Now I have seen some pple that had issues with using RSD , And Fastboot
its simple just read ,read and read.
post if you need helping installing anything i will see if i can type you though it
There are two fastboots use the right fastboot for the right files
one is for bigger files which is moto-fastboot and
the other is for smaller files which is fastboot.
ONLY use RSD for a RADIO AND OR The pudding file
once you have CWM please use it.
READ WARNINGS ON USING RSD.
Links
UNLOCK
http://forum.xda-developers.com/showthread.php?t=1136261
CWM
http://forum.xda-developers.com/showthread.php?t=1138541
Gingerbread by kenneth
http://forum.xda-developers.com/showthread.php?t=1159385
Xenocyde said:
Yes , prior to doing ANY thing I would reflash 1.2.6 ota to 1.8.3
Then RSD pudding ( unlock for atrix )
Then install CWM ( Clock work mod )
then install Kenneth Beta #4 rom for gingerbread with is a stock rom with
root and a dedoxed system ( faster ).
Now I have seen some pple that had issues with using RSD , And Fastboot
its simple just read ,read and read.
post if you need helping installing anything i will see if i can type you though it
Click to expand...
Click to collapse
Im already on 1.8.3 though
Sent from my MB860 using XDA Premium App
You can still flash the unlock now but I like to be safe and start out on a FRESH
start so you dont start having issues.
Sometimes NOT always you get small problems because of a past OS
that had stuff on it. FLashing back to the start and starting over insures you wont
have issues ( at lease you you can prevent )
Try flashing the unlock and then cwm then the new build it may work but
if you are having issues with something you may have to go though the whole
process again trying to save you a head ake.
you ask around or even look around alot safer starting from a fresh start
p.s. I am warning you because of my issues i had we live and learn sharing the smarts!
Xenocyde said:
You can still flash the unlock now but I like to be safe and start out on a FRESH
start so you dont start having issues.
Sometimes NOT always you get small problems because of a past OS
that had stuff on it. FLashing back to the start and starting over insures you wont
have issues ( at lease you you can prevent )
Try flashing the unlock and then cwm then the new build it may work but
if you are having issues with something you may have to go though the whole
process again trying to save you a head ake.
you ask around or even look around alot safer starting from a fresh start
p.s. I am warning you because of my issues i had we live and learn sharing the smarts!
Click to expand...
Click to collapse
Lol ok ill start fresh. But can you give me a link to unlock the bootloader? Ive seen too many threads on it
Sent from my MB860 using XDA Premium App
Just be safe and don't use sbf's after the unlock and stick with fruitcakes (posted in the dev section)
Sent from my MB860 using Tapatalk
BBock9 said:
Just be safe and don't use sbf's after the unlock and stick with fruitcakes (posted in the dev section)
Sent from my MB860 using Tapatalk
Click to expand...
Click to collapse
Yes good advise dont use RSD after gingerbread unless installing a radio
And I did give you a link to all three
look in post above bud. but just for you!
Links
UNLOCK
http://forum.xda-developers.com/show....php?t=1136261
CWM
http://forum.xda-developers.com/show....php?t=1138541
Gingerbread by kenneth
http://forum.xda-developers.com/show....php?t=1159385
OK so I'm stuck on some messed up 2.3.4 build. How can I get back to, 1.8.3 safely?
Sent from my MB860 using XDA Premium App
Use cwm and flash a fruitcake to it check in dev section. They have a 1.8.3 flushable zip that is safe.
Again read read and reread before flashing anything
Sent from my MB860 using XDA Premium App
Hi guys;
I want to update my Atrix, but I don't know what path to take?
a) Through the OTA 4.5.91...
b) Unlocking the bootloader, and then upgrading to GingerBread via Custom Roms...
I really need your help, because I am a newby in this whole area...
Right now I am runnig:
4.1.57 ATT
Android Version: 2.2.1
Build Number: GingerBlur 2.5
Your still on 57?
Sent from my MB860 using XDA App
yeah I am on 4.1.57
Why don't you at least update to 1.83. We've ben on .83 for months now.
Sent from my MB860 using XDA App
And what then?
artemalek said:
And what then?
Click to expand...
Click to collapse
Depends what you want to do with your phone. If you like testing out custom roms and stuff then go the way of unlocking the bootloader and flashing one of the custom GB roms. If you want a stock phone with some minor root modifications then flash ota and root. Just beaware if you do the ota build you cannot flash back to froyo (not sure why anyone would but just to warn you)
Sent from my MB860
can you refeer me to the posts where I can unlock the BL and then install a custom Rom
Yeah I am on 4.1.83 and Android 2.2.2.
I want to upgrade as well. Everything is stock currently.
I want to be able to do Cynogen later so I think I need to unlock and flash a custom rom.
So I am like the op and need to know where to go. There is so much argument and misinformation on this forum my head hurts. Just read for an hour and am more confused.
All I know is i dont want to do the OTA update lol!
HOwever I downloaded it already and my phone keeps asking me to install it...
DOes anyone know how to remove that?
Well, first, I suggest you do NOT flash the OTA update.
I recommend that you use the Pudding file in the Development sub-forum to unlock your device. There are video and text guides floating around how to unlock.
If you're not wanting to try out any ROMs yet, I suggest Kenneth's ROM. It's the OTA update, except without the risk of hard bricking if you ever need to flash down.
If you are all feeling adventurous, you could flash an Overclock kernel (I recommend Faux's 1.1GHz OC). You can also flash Ninja ROM v0.4.5. It's super fast.
@mercilus if you freeze the FOTA app in Titanium Backup, I think that stops it.
Here's the guide: http://forum.xda-developers.com/show....php?t=1167373
@artemalek I see that you're on 1.5.7, that means you have an AT&T branded device. You'll need to flash the AT&T version of Pudding for your unlock.
Sinful Animosity said:
Well, first, I suggest you do NOT flash the OTA update.
I recommend that you use the Pudding file in the Development sub-forum to unlock your device. There are video and text guides floating around how to unlock.
If you're not wanting to try out any ROMs yet, I suggest Kenneth's ROM. It's the OTA update, except without the risk of hard bricking if you ever need to flash down.
If you are all feeling adventurous, you could flash an Overclock kernel (I recommend Faux's 1.1GHz OC). You can also flash Ninja ROM v0.4.5. It's super fast.
@mercilus if you freeze the FOTA app in Titanium Backup, I think that stops it.
Here's the guide: http://forum.xda-developers.com/show....php?t=1167373
@artemalek I see that you're on 1.5.7, that means you have an AT&T branded device. You'll need to flash the AT&T version of Pudding for your unlock.
Click to expand...
Click to collapse
Your link seems to be broken. Thanks for the recommendations on roms!
@Sinful
I have it rooted... Can you give me step by step guide! Do I need first to upgrade to 4.1.83 or I can do it from 4.1.57???
mercilus said:
Your link seems to be broken. Thanks for the recommendations on roms!
Click to expand...
Click to collapse
D'oh! Will fix that immediately! Thanks for that!
artemalek said:
@Sinful
I have it rooted... Can you give me step by step guide! Do I need first to upgrade to 4.1.83 or I can do it from 4.1.57???
Click to expand...
Click to collapse
Here's a video: http://www.youtube.com/watch?v=H02N4p9vEg0
Here's a text guide: http://briefmobile.com/how-to-unlock-the-atrix-4g-bootloader
It doesn't matter about the Firmware version. The guy in the video is on 1.5.7 and unlocks it.
Sinful Animosity said:
Here's a video: http://www.youtube.com/watch?v=H02N4p9vEg0
Here's a text guide: http://briefmobile.com/how-to-unlock-the-atrix-4g-bootloader
It doesn't matter about the Firmware version. The guy in the video is on 1.5.7 and unlocks it.
Click to expand...
Click to collapse
On the text version, the directions say "RSD Lite 5.3.1 or sbf_flash [Download if Atrix is Froyo]"
Im on 2.2.2 so that means I should use sbf flash instead of rsd?
mercilus said:
On the text version, the directions say "RSD Lite 5.3.1 or sbf_flash [Download if Atrix is Froyo]"
Im on 2.2.2 so that means I should use sbf flash instead of rsd?
Click to expand...
Click to collapse
RSD is fine. I think sbf flash is for Linux.
Sent from my MB860 using XDA Premium App
Sinful Animosity said:
RSD is fine. I think sbf flash is for Linux.
Click to expand...
Click to collapse
I just followed the directions and RSD said it failed and gave me an error. I accidently hit show phone and it erased the error message but it was something about error at restarting.
Now my phone wont turn on? When I hit the power button/hold it all I get is blank screen.
It doesnt try to turn on or anything?
Did i mess up the phone permanently? crap... just what i was trying to avoid..
any advice?
How full was your battery? And if your phone was hard bricked, you'd be seeing an error.
Sent from my MB860 using XDA Premium App
Sinful Animosity said:
How full was your battery? And if your phone was hard bricked, you'd be seeing an error.
Sent from my MB860 using XDA Premium App
Click to expand...
Click to collapse
Battery was at like 80% when I last looked. So it was more when I started, and I did not leave the phone watched the whole process up til the point where it wont turn on anymore. So I doubt it lost all that battery in that brief 5 minute time.
Its been plugged in since still and no response from power button.
Everything was completely stock when I started.
Update: I just noticed when I take out my battery and plug in the charger I do get a green light as long as battery is out. When I put it in and plug in I get no lights. Not sure if thats helpful or means anything... (Just noticed its only with the USB charger I get the green light and not AC charger. The battery must be out)
ok so im confused. i just got my photon and i have unlocked it and rooted it and got cwm on it fine. but now i need to update to 198-7 for jokers rom, now im not sure where to find the sbf's and do i just go straight to 198-7 from my 154-5??? "as these are based on 198-7 you need to have sbf'ed 198-7 first (it doesnt flash updated radio)" and i just flash with rsd? like i had to for root on the unlocked boot loader? and finaly where do i get the sfb? thanks for all the help. im just new to photons.
thanks
You need to install RSD LITE and flash to 198-7 before applying the jokers locked 4g via bootstrap.
Read everything in this thread first for info on doing this.
http://forum.xda-developers.com/showthread.php?t=1202666
Then since the links are dead you can get the files from
http://www.holylivingfuck.com/ACS/SBFs/
Before flashing make sure your battery is greater than 50percent full. 100percent is better.
There is a quick instruction list I posted earlier for someone with a bricked phone. Dont care to rewrite it so here you go.
http://forum.xda-developers.com/showthread.php?t=1412153
So read , read read, copy and paste **** in a cheat sheat document and dont skip any steps... Good luck and know if you messup and you think the phone could be bricked you can always flash back via RSD lite... Long as you have plenty of battery.
Just thought i should say- im that fool with the bricked phone haha this worked perfect but i did get an error about "BD" or something at the end, i dont remember the exact error but i ignored it and sure enough it worked just fine!
Sent from my MB855 using xda premium
Joker's ROMs are based on 198_7, so you will need to flash it. ShabbyPenguin's holylivingfuck site has the 198_7 ROM. I flashed 198_7 first before unlocking, so I'm not sure, but I'm guessing the 198_7 ROM will re-lock the bootloader in which case you will have to unlock again.
It will also unroot the phone.
Yep flashing the sbf with rsd lite will restore the stock bootloader.
---------- Post added at 07:14 PM ---------- Previous post was at 07:08 PM ----------
Good to hear you got it back.. The phone is a bit more resilient than we think.
It is nice to have a fallback incase something doesnt work right.. Start using titanium backup for quick restorations or partial restorations and you wont lose anything text conversations etc..
TheChronicDroid said:
Just thought i should say- im that fool with the bricked phone haha this worked perfect but i did get an error about "BD" or something at the end, i dont remember the exact error but i ignored it and sure enough it worked just fine!
Sent from my MB855 using xda premium
Click to expand...
Click to collapse
The reason for flashing 198-7 is to ensure everything non-flashable is up to date and to know you have read enough to save your self in an emergency. Sbf's are our master reflashes that fix screw ups. It is possible to flash joker roms on 198-6(latest ota) but i want people to have a consistent experience along with the tools to fix problems already in place.
It may not be as easy as other phones but we are working on that.
Also the dev section has a great sticky by loki with links and instructions to nearly everything
Sent from my MB855 using XDA App
Makes sense. I thought it was to do with the deodexing of 198-7. Good to hear more into it from the man himself.
jokersax11 said:
The reason for flashing 198-7 is to ensure everything non-flashable is up to date and to know you have read enough to save your self in an emergency. Sbf's are our master reflashes that fix screw ups. It is possible to flash joker roms on 198-6(latest ota) but i want people to have a consistent experience along with the tools to fix problems already in place.
It may not be as easy as other phones but we are working on that.
Also the dev section has a great sticky by loki with links and instructions to nearly everything
Sent from my MB855 using XDA App
Click to expand...
Click to collapse
thanks for all the replys guys. i might do this later. it just takes so long you have to have a long time when you know you wont use your phone. haha =) thanks for the help guys.
OK now I'm confused,
I'm on 198-6
Rooted via torpedo
Installed bootstrap apk
Wiped all user data
Wiped dalvic cache x3
Installed skinny4g
Rebooted wiped dalvic cache x3
installed black out theme
I'm thinking skinny4g is deoxidized because i have flashed multiple themes?
Haven't had a hiccup or reboot yet
Running smooth
Am i missing something???
Sent from my MB855 using Tapatalk
Reason he would like everyone on a standard platform is for control over the testing.. Rhetorics but 198_6 may have force close and 198_7 may not. No need to diagnose problems that aren't on the approved platform..
He is not saying you cannot use 198_6 but it makes it easier if everyone use 198_7 for testing his rom's.
ttkyles said:
OK now I'm confused,
I'm on 198-6
Rooted via torpedo
Installed bootstrap apk
Wiped all user data
Wiped dalvic cache x3
Installed skinny4g
Rebooted wiped dalvic cache x3
installed black out theme
I'm thinking skinny4g is deoxidized because i have flashed multiple themes?
Haven't had a hiccup or reboot yet
Running smooth
Am i missing something???
Sent from my MB855 using Tapatalk
Click to expand...
Click to collapse
ScottieRotten said:
Reason he would like everyone on a standard platform is for control over the testing.. Rhetorics but 198_6 may have force close and 198_7 may not. No need to diagnose problems that aren't on the approved platform..
He is not saying you cannot use 198_6 but it makes it easier if everyone use 198_7 for testing his rom's.
Click to expand...
Click to collapse
Oh OK
So 198-7 wont become available OTA from Motorola?
And [email protected]## links for 198-7 are dead.
Ooooops mad bad Opera mobile downloads fine
Sent from my MB855 using xda premium
ttkyles said:
Oh OK
So 198-7 wont become available OTA from Motorola?
And [email protected]## links for 198-7 are dead.
Sent from my MB855 using xda premium
Click to expand...
Click to collapse
Links just worked for me.
http://www.holylivingfuck.com/ACS/SBFs/
6bowmans said:
Links just worked for me.
http://www.holylivingfuck.com/ACS/SBFs/
Click to expand...
Click to collapse
Yea thanks just swiched to Opera
Sent from my MB855 using xda premium
I'm sorry if the answers to my question have been answered but I can't find them after searching for a few days.
I need to send my Atrix in for a repair or replacement. It is unlocked and rooted running Turl's CM9 right now. Obviously I can't send it back as is, so how should I go about everything?
Flash an SBF, flash a fruitcake rom, or something else that I haven't stumbled upon?
The only threads I could find are from a year ago and so much has changed since then. I just want to be sure I go about this the correct way. And should I go through ATT or Motorola? I know my phone is still under warranty with both.
Thanks for any help! It is much appreciated!
"Always have an exit strategy"
You can flash a fruitcake but the "unlocked" text will remain so you can hope for the best.
Or you can try an SBF (Disclaimer: at your own risk).
How long have you had it? Usually if you have had it for more than 30 days AT&T won't help but if you are still under "warranty" with them I would try AT&T first.
If you can't find a way to return your phone back to stock you can try Motorola, they might just overlook the modifications you have done.... or they might charge you a service fee...... or they might just send the phone back to you. It really depends on who ever is processing your claim and the mood they're in.
Also, please don't start multiple threads on the same topic.
http://forum.xda-developers.com/showthread.php?t=1549599
scarbutt11 said:
I'm sorry if the answers to my question have been answered but I can't find them after searching for a few days.
I need to send my Atrix in for a repair or replacement. It is unlocked and rooted running Turl's CM9 right now. Obviously I can't send it back as is, so how should I go about everything?
Flash an SBF, flash a fruitcake rom, or something else that I haven't stumbled upon?
The only threads I could find are from a year ago and so much has changed since then. I just want to be sure I go about this the correct way. And should I go through ATT or Motorola? I know my phone is still under warranty with both.
Thanks for any help! It is much appreciated!
Click to expand...
Click to collapse
OK thanks. I had read that if I use the Motorola Software Update tool it will erase the "unlocked" text. I don't know how true that is though.
And sorry about the multiple threads, its just annoying not being able to use half my keyboard in portrait. Just was hoping for some quick answers.
Thanks again for the quick response
Sent from my MB860 using XDA
I had restored a few times to stock.
I do that:
Reboot in fastboot mode and fastboot - w, fastboot erase system, fastboot erase cache, fastboot erase preinstall.
Turn phone off and pull out sim card and sd card.
Reboot in rsd mode (olding vol+ at boot) and flash your sbf with rsd lite.
That's all.
Sent from my xda premium
LeroyVold said:
I had restored a few times to stock.
I do that:
Reboot in fastboot mode and fastboot - w, fastboot erase system, fastboot erase cache, fastboot erase preinstall.
Turn phone off and pull out sim card and sd card.
Reboot in rsd mode (olding vol+ at boot) and flash your sbf with rsd lite.
That's all.
Sent from my xda premium
Click to expand...
Click to collapse
Ok, you don't happen to have a stock sbf file? I can't find one anywhere.
Also, why is it that we shouldn't flash sbf files? It seems that people have success with them but everyone keeps saying not to do that. But I can't find a stock flashable zip and the fruitcake links are dead so sbf seems to be my last resort.
I'm just stuck scratching my head because of all this confusion?
scarbutt11 said:
Ok, you don't happen to have a stock sbf file? I can't find one anywhere.
Also, why is it that we shouldn't flash sbf files? It seems that people have success with them but everyone keeps saying not to do that. But I can't find a stock flashable zip and the fruitcake links are dead so sbf seems to be my last resort.
I'm just stuck scratching my head because of all this confusion?
Click to expand...
Click to collapse
Look in the firmware superthread, in the last pages someone have a link in his sign to a page of many stock sbf files. I found there my updated one.
I always got succes with rsd lite but only with a full wipe with fastboot before it say "pass" at the end. Otherwaise it say to 'manually reboot'.
Don't know why people say "do not use sbf", probably there is a reason, but i think it is the only way to remove the 'Unlocked'
Here links to froyo sbf
and to GingerBread sbf
also you need to delete any folder about apps that need root to work and su folder and anything that presume you have rooted your phone
Sent from my MB860 using xda premium
Depending on what build you are currently on you do not want to "downgrade". So if you are on a Gingerbread build (4.5.91 or 4.5.141) do not flash the Froyo SBF. And probably if you are on the 4.5.141 build (2.3.6), it is not recommended to flash the ".91" build. That is where the issues can occur.
I have also used RSD Lite to flash back to stock (a few times) but always use caution. So, for @scarbutt11, do you happen to remember what build you were on before you unlocked the bootloader and flashed a custom ROM?
LeroyVold said:
Look in the firmware superthread, in the last pages someone have a link in his sign to a page of many stock sbf files. I found there my updated one.
I always got succes with rsd lite but only with a full wipe with fastboot before it say "pass" at the end. Otherwaise it say to 'manually reboot'.
Don't know why people say "do not use sbf", probably there is a reason, but i think it is the only way to remove the 'Unlocked'
Here links to froyo sbf
and to GingerBread sbf
also you need to delete any folder about apps that need root to work and su folder and anything that presume you have rooted your phone
Sent from my MB860 using xda premium
Click to expand...
Click to collapse
Yeah, I was running stock 4.5.91/2.3.4. I'm on a cm9 build now. I'm not sure if that will matter at all for flashing back to GB? I know I tried cm7 to see if it was just cm9 causing the problems, but it seems it is hardware related.
Sent from my MB860 using XDA
Yeah, it depends on what "Official" build you were last on. Since you were on "4.5.91" then I would just use that SBF. Like someone else mentioned, it is possible to use RSD Lite, just use caution.
scarbutt11 said:
Yeah, I was running stock 4.5.91/2.3.4. I'm on a cm9 build now. I'm not sure if that will matter at all for flashing back to GB? I know I tried cm7 to see if it was just cm9 causing the problems, but it seems it is hardware related.
Sent from my MB860 using XDA
Click to expand...
Click to collapse
Thanks so much for the help. I'll go ahead and give it a shot. I'll let y'all know the outcome.
Sent from my MB860 using XDA
Took a little pulling of my hair while I waited but fastboot wipe and then flashing the stock sbf worked like a charm. I am back on stock GB, the unlocked text is gone and now I can hopefully get my phone fixed or replaced.
Thank you so much @live4nyy and @LeroyVold!!! Without you guys I would have been still scratching my head. I owe you both big time
No problem man, i need to do the same.
my touchscreen is more and more often unresponsive, so i'm flashing my stock sbf as i write.
Finally got a chance to swing by the AT&T store. They replaced the phone no problem thanks again guys!
Sent from my MB860 using XDA
i need to do the same. im sending this phone in and already got my new atrix sitting here.
Freaking Motorola phones, they break without you even touching them. I gotta figure out how to send mine to att as well.
u need to do a write up in here of how u did it. it might be redudant to some but to others like myself, it will be like having my hand held doing a scary process...your guidance as having it done yourself would help...with a how to..
scarbutt11 said:
Finally got a chance to swing by the AT&T store. They replaced the phone no problem thanks again guys!
Sent from my MB860 using XDA
Click to expand...
Click to collapse
Free or did you have to pay?
LeroyVold said:
I had restored a few times to stock.
I do that:
Reboot in fastboot mode and fastboot - w, fastboot erase system, fastboot erase cache, fastboot erase preinstall.
Turn phone off and pull out sim card and sd card.
Reboot in rsd mode (olding vol+ at boot) and flash your sbf with rsd lite.
That's all.
Sent from my xda premium
Click to expand...
Click to collapse
this isnt working for me. and i need to send my phone in within a day.
Atrix_Owner said:
Free or did you have to pay?
Click to expand...
Click to collapse
For free, I bought the phone through them less than a year ago. All I said was that the screen was unresponsive and they looked at it for less than 10 minutes and then said they would replace it for me.
jahizen said:
u need to do a write up in here of how u did it. it might be redudant to some but to others like myself, it will be like having my hand held doing a scary process...your guidance as having it done yourself would help...with a how to..
Click to expand...
Click to collapse
Thats not a bad idea. I have never done one before but now that I'm thinking about it I am sure there are others that need to do what I just did. I will try to write one up in the next few days. Thanks for the idea!
live4nyy said:
Depending on what build you are currently on you do not want to "downgrade". So if you are on a Gingerbread build (4.5.91 or 4.5.141) do not flash the Froyo SBF. And probably if you are on the 4.5.141 build (2.3.6), it is not recommended to flash the ".91" build. That is where the issues can occur.
I have also used RSD Lite to flash back to stock (a few times) but always use caution. So, for @scarbutt11, do you happen to remember what build you were on before you unlocked the bootloader and flashed a custom ROM?
Click to expand...
Click to collapse
hello i guess you could help me with a doubt i have..i used to be on stock 4.5.141 Gb 2.3.6 atrix 4g..im new on this things..and i installed succesfully cm7.2 but its not stable as i expected..i wanna go back to stock rom but im not sure what to do...i tried to go back using CWM restore...¨yes i made my backup before everything¨ but the restore didnt work...its stuck on moto booting logo..then i had to install again cm7 but the ba2tf wich its a bit more stable but not enough comparing to stock i had.. then my question its...
should i flash my phone with sbf 4.5.141?? or what do you recommend me..i dont wanna make a downgrade just be at 4.5.141 again
thanks
Update:
there is a good solution by peetr_ located @ http://forum.xda-developers.com/showthread.php?t=1798145
no need to flash full SBF.
Earlier post (July 2012)
*************************************************************************
this method is obsolete now.
but it was the only way at that point in time.
Use it on your own rick.
it worked for me to get back my photon 4G after locked OTA 2.3.5 update
it uses Electrify sbf. Electify is similar to photon with no 4G (Carrier is US Cellular - may not work with Sprint)
I am not in US so not able to check.
the method I used to clear Failed to boot 2 error on photon 4g:
be warned that you may loose 4G. this is ELECTRIFY SBF
downloaded the Electrify sbf form here
use RSDLite 5.5 to flash this sbf into the phone. in the final stages, it will show failed. but don't worry
it will work. try to switch the phone on. some times it will not boot.
wait for some time and it will boot slowly.
perform a factory reset from settings or by using android recovery
it is easy to root with photon-torpedo.tar
root help is available here
Update pls visit
http://www.groovypost.com/howto/motorola-photon-4-g-how-to-root-your-phone/
anybody try it? please post your results
omg thx a million i dont know how to thank you....
IT WORKSSS!!!
blakm43 said:
omg thx a million i dont know how to thank you....
IT WORKSSS!!!
Click to expand...
Click to collapse
your now stuck on a us cellular firmware and will not be able to find a mms fix besides maybe google voice. just saying.
Almost did the same thing myself, but looking for other fixes before I do such a thing... May have problems with calls as well.
MeanJellyBean said:
your now stuck on a us cellular firmware and will not be able to find a mms fix besides maybe google voice. just saying.
Almost did the same thing myself, but looking for other fixes before I do such a thing... May have problems with calls as well.
Click to expand...
Click to collapse
so far I have not come across any problem speculated by you. this is better than a bricked phone.
people are working on 2.3.5 Photon 4G fw. I am going to test one ver today.
blakm43 said:
omg thx a million i dont know how to thank you....
IT WORKSSS!!!
Click to expand...
Click to collapse
perform a factory reset from settings or by using android recovery (wipe cache / data)
portman said:
so far I have not come across any problem speculated by you. this is better than a bricked phone.
people are working on 2.3.5 Photon 4G fw. I am going to test one ver today.
Click to expand...
Click to collapse
I was just going by what i had read in some forums earlier. And trust me anything is better than bricked!
If you dont mind, what works and dont?
Anyone else having issues download SBF from Teamuscellular site? I have used IE, Chrome, Firefox, & Safari to try and download with no avail! It always stops around 300mb, when it states it is a 500 or 600 mb file, so im basically getting only half the file dl'd... Maybe someone could send me a copy of what they have or something?!?! I have been going through just trying to revive my phone for days now... ANY HELP APPRECIATED!
Is there a way to flash a working cdma radio? ::fingers-crossed:
Yes there is.
http://d-h.st/y2i
I know the first thing in doing when I Finnish fixing the PC!
Peetr if I can do anything to help out, I'm eternally thankful for all you've done to help me get back to working order! I'm new to Moto, but I've been tinkering with htc few a while now, may be able to help with some testing.
Sent from my Motorola Electrify using xda app-developers app
I would need from you, to read custom sbf thread (all posts) and try to get boot.img, recovery.img from Photon 2.3.5 (sv2) and system.img dump in your phone.
It's a challenge, I know.
Looks like I have myself some serious reading to do but if I can help you guys out with this I'm down! I have to get this PC back up, so I'll be on this asap. Thanks a million, and hopefully I can contribute some useful information.
On a side note, I have experienced a few reboots randomly since flashing the sbf. I'm sure out had to do with the fact its a different phone firmware, bUT thought you might like to know.
Sent from my Motorola Electrify using xda app-developers app
Those reboots are modem panics, because of no radio.
Or you can try to install mofish rom with bootstrap and try to fastboot flash only boot.img first, or I can give you sbf with boot and recovery.
Factory reset?
Sent from my Motorola Electrify using xda app-developers app
Anyone having an issue like this can refer to this thread:
http://forum.xda-developers.com/showthread.php?t=1760506
peetr_ from this thread resolved my issue and I'm no longer bricked (working WiFi AND 4G!). The fix comes around the 3rd or 4th page.
Ok so I was finally able to get PC back, flashed radio SBF (Radio & Gps fixed) - saw something about modules for 4g and sprint im taking it? I currently do not have any calling, mms, etc priveledges. I did reroot, added bootstrap, doing nandroid backup as we speak. I guess only left to do is get this mopho back up and running - completely!
---------- Post added at 07:45 PM ---------- Previous post was at 07:08 PM ----------
peetr_ said:
Those reboots are modem panics, because of no radio.
Or you can try to install mofish rom with bootstrap and try to fastboot flash only boot.img first, or I can give you sbf with boot and recovery.
Click to expand...
Click to collapse
So like I said I have got most of the phone back, I have wifi, radio, gps. NO calling, text, or data. tried to install modules.zip through bootstrap, they installed, but lost my wifi. Restored back with nandroid. Now I guess I wait... Until either yourself of mofo give me some instructions as to whats next. Not trying to f it up again!
Install mof 2.3.5ish rom first.
peetr_ said:
Install mof 2.3.5ish rom first.
Click to expand...
Click to collapse
will do that first thing tomorrow. I have been working but off trying to get PC back up and everything else.
Sent from my Motorola Electrify using xda app-developers app
So mof, then modules?
Sent from my Motorola Electrify using xda app-developers app