Hi there.
I recently rooted my X2 using the Moon Shadow's "zergrush" method. Everything works great, except I find myself unable to change the USB settings. The last state it was in was Charge Only, and Debugging is enabled. When I plug my phone into my laptop, it does charge, but the notification doesn't show up on the drop down bar. When it's plugged in all I get is the "USB device not recognized" error. I've googled around and tried many options I've seen (resetting phone/laptop, trying a new cable, reinstalling drivers) but nothing seems to work. I was hoping that someone would know of a hard way to change these settings, thanks!
I had a similar issue recently. If you are using Windows, Google search for "USB reset". Microsoft has a "fix-it" tool that will reset the USB host controllers. After that, remove and reinstall your device drivers. Reboot both your computer and your device. Then try connecting the USB again.
Sent from my DROID X2 using XDA App
Related
Okay all. Usually I don't post and just lurk around here to find the answers to my issue. This time after reading 300 posts about Activesync and the TP my problem is still not resolved.
Up until last Friday I have been able to sync the TP with my computer running WinXP via the USB connection. I sync with my exchange server OTA but use the USB connection for file transfers. My computer won't recognize that the TP is even plugged into the USB now. It still charges, but doesn't do anything else. I've rebooted the machine and TP, reinstalled Activesync on computer, unchecked the "enable advanced network functionality" box, changed USB cords, verified that I have the correct three repllog.exe values in my notification queue, and even hard reset the TP. Still no luck. I would think that it's something to do with the computer except that I plugged my Mogul in to check and it synced instantly.
Does anyone have any more ideas why the TP would not be registering as connected? You all are amazing when it comes to stuff like this, so any help would be greatly appreciated.
Thanks in advance.
uninstall the Windows Mobile-based Device from the
network adapters section of Device manager on the PC.
control panel -> system -> hardware tab -> device manager button
restart pc and plug in the phone via usb and select active sync.
also the reason this may work in your case is i have had to do this for a friend.
windows installed the general rdnis driver however each device has a different
instance installed and thus the one device can have a corrupted driver yet the
other works perfect.
i see that u used another usb cable, cuz once it happened to me that the cable would charge but vista wouldn't recognize my TP "unrecognized USB device" , until i changed my usb cable!
Well I finally just went to a friend at the Sprint store and he swapped me for another TP. The new one works perfectly with the same setup that the other wouldn't. I can only guess that somehow the USB connection on my phone failed somehow. Just wanted to post this in case anyone else may have this issue in the future. Thanks for the responses.
This problem has happened on a friends, as well as just happening to mine (about 20 minutes ago). The usual fix which seems to clear it up:
1 - Hook up phone to computer
2 - On phone, start ICS (Internet Sharing in Start -> Programs)
3 - Select PC Connection "USB" and Network Connection of any type (if Sprint stock ROM, I recommend using "Sprint")
4 - Hit the "Connect" soft-key (bottom left)
If you've never used Internet Sharing on the phone, your computer should install some drivers... Once that is completed, click the Disconnect left soft-key on the phone. Now disconnect the cable from the computer.
Close out ICS or soft-reset the phone.
Once the phone is back up, plug it in - it should work.
I don't know what is getting reset in the phone, but unless I connect with ICS, then ActiveSync will not connect whether I soft-reset or not.
The same thing happened with my phone.... I took it to the Sprint store and they even tried a hard reset. It worked once after that then again it wouldn't sync. So they just replaced mine.... It was like you said.... some malfunction in the phone itself.
Hope HTC can figure out why this is happening.
Touch pro not sync
I can sync with my Vista Laptop and my friends xp machine but not to my xp desktop. I have tried many different cables. Each time I try something new, I toggle the "enable faster data synchronation box on USB to PC on try to sync then off then try to sync.
I have tried to delete all the usb drivers and rebooted to let the computer put in a new set.
I have tried to delete all the non running programs in my device manager using view hidden files.....
I have uninstalled active sync and then reinstalled it.
I have hard reset my phone a few times to no avail.
I went and bought a blue tooth adapter so I could sync using blue tooth and this computer does not do a good job of recognizing the adapter, but it did recognize it the first time but, could not pair the two. my blue tooth adapter is now coming up as a an unknown device
when i hook up the phone this is the message i get:
USB not Recognized,
One of the USB devices attached to this computer has malfunctioned, and windows does not recognize it. For assistance in solving this problem, click this message....
Any ideas?
Thanks,
Kent
MCW junior member THANKS....
thanks so much, this worked for me I could not sync my tasks or calendar, once I did what you said here I did get and Error Code 67..then cannot connect saying remote party has ended this connection...whatever that means...but anyway it proceeded to start automatically resynching and walla..all of sudden my tasks and calendar were on my computer ....first time I was ever on this forum ....I shall continue reading and learning here...so appreciate your help...I love my HTC Touch Pro and have just figured out how to connect to my big screen tv with only an MP3 or the like cable...works beautifully...except picture on tv is not the clearest...I will work on perfecting that next if it is possible...
Then I want to figure out how to get the phone connected to my computer screen, just like I did to my TV...then your phone acts as a controller...it's so cool!!
Michele S
Ok I just found a solution for this, at least under Vista.
Click Start > Settings > Connections (tab)
Choose USB to PC
Once I removed the check mark next to "Enable advanced Network functionality" and clicked OK, my PC immediately saw my TP.
Hope this helps someone.
so what does the faster syc option do?
Ok so I searched the internet and found the advice to turn off the faster sync option on the phone.
After trying everything else I figured what the heck..
So it worked.
(btw windows adds a dif driver rather then the window-mobile baised device driver... )
So what does this option do? What does it point to being the problem on the computer?
Thanks,
HA>!
dashrender said:
ok i just found a solution for this, at least under vista.
Click start > settings > connections (tab)
choose usb to pc
once i removed the check mark next to "enable advanced network functionality" and clicked ok, my pc immediately saw my tp.
Hope this helps someone.
Click to expand...
Click to collapse
yeah i was having the same problem...my cpu would just recognize my phone as a mass storage device... Read your solution. And it worked... Damn i feel like a moron should have checked. Thanks!
I am having the same problem except the enable advanced network functionality option is checked and grayed out so it can't be unchecked.
I am running a 6.5 rom...
Any suggestions?
Solution solved
If you go to Settings->Connections->USB to PC and uncheck Enable faster data synchronization.
You will notice below that it will say "(Clear this check box if ActiveSync does not recognize the device)"
Once I did this it worked perfect.
tjrmoney said:
If you go to Settings->Connections->USB to PC and uncheck Enable faster data synchronization.
You will notice below that it will say "(Clear this check box if ActiveSync does not recognize the device)"
Once I did this it worked perfect.
Click to expand...
Click to collapse
Think of this step as telling your tp to quick boot/sync if nothing between the device and the reciving pc has changed (ie: hardware, software etc.
Enables faster syncing and quicker connection and authentication between pc and WM device. Reason for unchecking this to make it work?, by hard-reseting or changing specfic phone information you've reset specfic settings that are registerd with your pc.
i was having this problem with my sprint tp2 and tried it and worked. wish i would of learned if before reseting my computer and losing some windows i had open and the hard reset on my phone and losing all my contacts now i gotta go back to sprint store to get them again.
Works on the Touch2
I had this problem, which was driving me nuts especially as it was intermittent. I found Dashrender's advice and followed it except for turning off "Enable faster data synchronisation". Brilliant, works perfectly, thanks.
But what are HTC doing putting something in the software that fouls things up?
I knew i wasnt loosing my mind!
I have been workn on phones for a while. And have just been freakn about these same Issues Sony vio with 64bit vista. Thanks for all the tips. only took 6 hrs of pain to figure it out myself.
I have a similar problem now with my USB to PC . i have used this usb cable for many flashes but now when I plug it in, my computer doesnt recognize the usb device. also TV-Out pops up on my phone too. what is that all about? i dunno what to do
just found this thread searching for why my tp2 wouldn't sync. somehow under usb to pc i had it set to disk drive instead of active sync. checked it and works like a charm, can even see it in my computer now.
Today i plugged my phone to the usb cable and instead of getting the usual connection option screen... nothing... The phone charges but no Data transfer. Did hard reset, still nothing.. now im stuck with the old firmware... any help plz?
might be the cable that you're using. i used before a cable that is not the original and the same thing happened to me, i.e. pc cannot recognize device.
Try Settings-->Other-->USB To Pc-->UNCHECK (enable faster data sync) this should help...
cable : original came with the phone (used to work up until b4 yesterday) also tried another micro usb cable that came with me N900 but still nothing.
I did the un-check "enable faster sync" still nothing
Did soft reset, hard reset using volume keys, and factory reset from phone setting itself. still nothing.. the phone charges.. but no data transfer.. its something to do with the phone because i tried multiple PC's the phone doesn't bring up the connection type option page
Epiclipto said:
Today i plugged my phone to the usb cable and instead of getting the usual connection option screen... nothing... The phone charges but no Data transfer. Did hard reset, still nothing.. now im stuck with the old firmware... any help plz?
Click to expand...
Click to collapse
Altho u have tried with diff PCs,try reinstalling MS Activesync on one PC.
did that too
when you make/recieve a call, does the loudspeaker come on?
nope everything is normal except no data transfer when connected to usb...
Epiclipto said:
did that too
Click to expand...
Click to collapse
Now pls chek whether USB2 is enabled in your PC Bios...
The cable used to work before, and I tried it on multiple PCs, how can it be that USB2 is diasbled?
Epiclipto said:
The cable used to work before, and I tried it on multiple PCs, how can it be that USB2 is diasbled?
Click to expand...
Click to collapse
No harm in checking.Infact i faced similar issue once and the USB2 was disabled.It took me an entire week to diagnose the problem.These PCs have got a mind of their own and do mischievous things on their own without our knowledge.
But since its not working on multiple PCs,i am not sure.We'll hav 2 wait 4 a solution i guess...
hmmmm.. would a full system format and re-install be possible? and would it fix it? (talking bout on the phone)
HELP, HELP
SAME PROBLEM WITH HTC2 T0MOBILE
even on the boot loader screen, it charges but no USB stuck on serial.
even when on sleep mode and plug the cable orange led is on but it didn't wake up for choose (active syn or stoeag memory)
PLEASE HELP
i can do nothing, HSPL or rom upgrade
the cable and the USB drivers are tested more than 100 times
Most horror problems I had with the USB sync have been down to not having the latest version fo Activesync from microsoft. Uninstall the old version thwen reboot - now download the 4.5 version which I think is the newest and last version they made (unless im out of date) and then reboot the machine, then connect up the phone - but not immediately after the machine has booted wait a couple on mins, Windows takes longer than it often appears to be ready to go. One your hard drive led flashing light has settled down it is probably time to try. Then see if it finds all the devices in your phone.
If it doesnt go into the control panel and double click system, hardware tab, then select device manager and see if there are any devices with a yellow sign with a "!" in them. If there are delete them and then unplug the phone and plug it back in again. It might get past some stuck things. If it doesnt see anything new on device manager theres a menu at the top and look for "scan for hardware changes" this gives teh device manager another look at what its got connected.
If that fails open up the USB section under in device manager - its got a little plus next to it, press that plus and it open up all the names of chips you have for your USB control on the pc's motherboard. Write down the numbers and go and get the correct up to date drivers for that type of USB and install them. Then try the process again. Sometimes deleting the USB drivers and just doing a "scan for hardware changes" again, will reset the USB drivers and start things working, however it can get tricky if your using USB mouse and Keyboard to select anything if you delete the USB, because thats what the KM/mouse relies on to control teh machine, so have a PS2 mouse plugged in if you can. If that fails I would suggest reinstalling windows as its probably knackered. It amazing how things start to work wonderfully on a fresh copy of windows.
I have been where you are! And tried every suggestion that was given here. It all came down to the cord. I actually went through 3 different cords before I found one that worked and found that by accident. I bought an external drive and that cord works. For whatever reason, that is the only cord that now works for me. I only use it for data transfers. i use the other cords for charging.
I encountered something perculiar. I plug my phone into the usb cable connected to my PC, the device icon showed up in My Computer and I clicked the gt-9300 icon.
Instead of showing 'Card' and 'Phone' icon, nothing is display. It has been happening to both my pc and laptop randomly. I had already reinstalled my kies and drivers, flashed a new rom and it is happening still.
by any chance has anyone encountered the same problem as I did?
Probably no USB drivers.
jje
Sent from my GT-I9300 using xda premium
If your phone is locked with a PIN etc., then you have to turn the screen on and unlock it or the phone won't expose the cards.
Running 5.1.1, I've tried installing the latest drivers from verizon & LG along with Windows10-KB3010081-x64.msu on two Windows 10 machines, and just the drivers on one Windows 7 machine.
When connecting the phone it displays it's charging. If I tape where it says "Battery full, safe to unplug charger" it closes the app drawer.
I've switched between MTP and PTP in storage settings-nothing happens.
I've turned on USB debug in developer options, still no go-the device does not show up in device manager at all.
I've tried the micro USB cable that came with my phone, along with a high speed insignia cable, and two cables that came with kindle fire tablets of various generations.
I've tried using the LG Suite-nothing happens, doesn't discover the device which I was expecting since it doesn't appear in device manager at all.
I've also factory reset the phone, it's never been rooted or had a ROM flashed, completely stock.
Anyone have any idea what I can do from here?
So, I have received a hand-me-down Nexus 9, and I start in on my usual cleanup and setup routine, only to find something very weird- my computer utterly does not notice its existence when I plug in the USB, and the USB settings are missing from their usual spot in the Storage and USB section of settings.
I eventually found the control for USB type in the Developer settings (maybe it moves when you activate those?), but the computer still doesn't know anything's connected.
Things I have confirmed:
Tablet charges fine.
The cord works for file transfer with another device (a Kindle that happened to be around)
I can change to different USB connection types- none of them work.
The computer is COMPLETELY unaware of the tablet- no mysterious entries popping up to indicate missing drivers, nothing.
WTF? I can't do most of the other steps I usually do without at least a little bit of access so I can root the thing and put in a decent recovery. Has anyone else seen something like this? Was there a fix?
Firefairy said:
So, I have received a hand-me-down Nexus 9, and I start in on my usual cleanup and setup routine, only to find something very weird- my computer utterly does not notice its existence when I plug in the USB, and the USB settings are missing from their usual spot in the Storage and USB section of settings.
I eventually found the control for USB type in the Developer settings (maybe it moves when you activate those?), but the computer still doesn't know anything's connected.
Things I have confirmed:
Tablet charges fine.
The cord works for file transfer with another device (a Kindle that happened to be around)
I can change to different USB connection types- none of them work.
The computer is COMPLETELY unaware of the tablet- no mysterious entries popping up to indicate missing drivers, nothing.
WTF? I can't do most of the other steps I usually do without at least a little bit of access so I can root the thing and put in a decent recovery. Has anyone else seen something like this? Was there a fix?
Click to expand...
Click to collapse
Try a different cable.
Boot into bootloader and see if computer sees device there
When you plug your tablet to computer a notification pops up on Nexus 9 (Charging only). Click on it and you will be able to select different connection mode.
If changing that notification mentioned in Post #3 doesn't work, updated the USB drivers in the computer Device Manager while the Nexus 9 is connected.
I had a similar issue with a Nexus 9 I bought on Swappa. I had to wiggle the usb cable, but in my situation the "data" portion of the usb port on the tablet was faulty/damaged (PTP/MTG/OTG failed). It was able to charge without issues, and by wiggling it windows would detect it but fail "usb device malfunctioned".. I ended up returning it to seller.
I've had this happen at times (only owner of my device). If you did what maelfilk suggested and no go, you either have a power-only cable (similar to what clockcycle posted) or you need to go through process of upgrading driver on PC; or, if that doesn't work, delete everything related to android USB drivers on PC. Then, let them (each device) repopulate.
Nexus 9