Related
Hi all
I am trying to de-brand my Orange UK Mozart. I got the de-brand kit from fonefunshop.co.uk.
I've followed the instructions on the video they posted. But the phone rebooted multiple times during the update and eventually failed with an error message.
I've tried putting a different ROM on the SD card, but the mozart screen displays a message no image file. I have renamed the ROM to MOZAIMG.nbh.
I now have a phone that only goes to bootloader and only displays Enter USB Host Mode...
Using the normal USB cable, I've looked that the ROMUpdateUtility, but for some reason the phone isn't being detected by Windows 7, so I can not connect to the device. Any ideas anyone? What should I try next?
Help!
I also purchased the cable and goldcard from Fonefunshop.co.uk. Received mine at 07.30 this morning and was updated and completed by 07-45. Mine also rebooted numerous times but flashed successfully. I then did the pre NO-DO update via zune and then put the NO-DO update on the sd card supplied and flashed that with no probs. if you think that the supplied nbh is corrupt let me know and ill help if i can. If you remove the battery and re insert it can you then start the phone by holding the volume down and camera button again ?
Regards
Craig
csw43 said:
I also purchased the cable and goldcard from Fonefunshop.co.uk. Received mine at 07.30 this morning and was updated and completed by 07-45. Mine also rebooted numerous times but flashed successfully. I then did the pre NO-DO update via zune and then put the NO-DO update on the sd card supplied and flashed that with no probs. if you think that the supplied nbh is corrupt let me know and ill help if i can. If you remove the battery and re insert it can you then start the phone by holding the volume down and camera button again ?
Regards
Craig
Click to expand...
Click to collapse
Glad to hear of your success, thats what I was hoping for!
Would you be able to upload the original ROM file that was on your SD card from Fonefunshop?
Thanks
Zetabit
No problem.....if you have somewhere i can upload it to
Craig
csw43 said:
No problem.....if you have somewhere i can upload it to
Craig
Click to expand...
Click to collapse
Do you have a Dropbox account? PM me your email and I will send you an invite to a shared folder (where you can upload the ROM to).
Thanks
Here is a much easier way to Debrand - http://windowsphonereview.com/htc/debrand-mozart/
I also having this problem as Zetabit. Phone just reboots about 8 times then Radio - OK, Bootloader - OK
Update Terminated, UPDATE Fail
Is it the image that come from fonefunshop.co.uk on the debranding y cable
HELP please
Thanks
Brian
brian colston said:
I also having this problem as Zetabit. Phone just reboots about 8 times then Radio - OK, Bootloader - OK
Update Terminated, UPDATE Fail
Is it the image that come from fonefunshop.co.uk on the debranding y cable
HELP please
Thanks
Brian
Click to expand...
Click to collapse
Hi Brain,
I gave up with the fonefunshop.co.uk supplied SD card. I resolved my issue by creating my own goldcard and using a ROM that I downloaded from here.
Here are the steps I took (unfortunately it requires the use of an Andriod phone).
http://forum.xda-developers.com/showpost.php?p=12120618&postcount=6
Good luck
I've read just about every thread on here with people having issues updating and nothing has worked for me. I can't seem to get kies to connect to my phone to use the emergency tool (tied just about every method here). I'm thinking it maybe best to try my hand again at reverting back to gb and see if kies will connect. I'm not sure what tools I need to go back to gb, rom, modem etc, and which order to flash them at. I've downloaded to my pc the big rar file located in the dev sticky section for unbricking but when I place the file into odin and run it, it fails...what do I do?
Sent from my SAMSUNG-SGH-I717 using xda premium
!!!!!
nash2000 said:
I've read just about every thread on here with people having issues updating and nothing has worked for me. I can't seem to get kies to connect to my phone to use the emergency tool (tied just about every method here). I'm thinking it maybe best to try my hand again at reverting back to gb and see if kies will connect. I'm not sure what tools I need to go back to gb, rom, modem etc, and which order to flash them at. I've downloaded to my pc the big rar file located in the dev sticky section for unbricking but when I place the file into odin and run it, it fails...what do I do?
Sent from my SAMSUNG-SGH-I717 using xda premium
Click to expand...
Click to collapse
man i had the same problem, i downgraded to stock gb radio, stock kernal, stock recovery and everything. still nothing. tried a different PC and still nothing.
i just ended up flashing stock UCLF5 through the reootzwiki .exe file, then flashing CWM and flashing the official UCLF6, (rooted, de'oed etc) from here http://forum.xda-developers.com/showthread.php?t=1766933, i checked settings under ABOUT PHONE and baseband was UCLF6 etc. all set. so on stock ICS, with minor minor tweaks. :good::good::good:
cdromo90 said:
man i had the same problem, i downgraded to stock gb radio, stock kernal, stock recovery and everything. still nothing. tried a different PC and still nothing.
i just ended up flashing stock UCLF5 through the reootzwiki .exe file, then flashing CWM and flashing the official UCLF6, (rooted, de'oed etc) from here http://forum.xda-developers.com/showthread.php?t=1766933, i checked settings under ABOUT PHONE and baseband was UCLF6 etc. all set. so on stock ICS, with minor minor tweaks. :good::good::good:
Click to expand...
Click to collapse
I'm downloading the file now...so all I need to do is flash the downloading file and retry kies?
Sent from my SAMSUNG-SGH-I717 using xda premium
I didnt downgrade or anything. Just got latest ver of kies, put phone in DL mode, plug in to pc. Never showed connected. Chose tools, then firmware update intance or something. Fill in the popup window with serial and model #. Hit next and sit back.
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
madman604 said:
I didnt downgrade or anything. Just got latest ver of kies, put phone in DL mode, plug in to pc. Never showed connected. Chose tools, then firmware update intance or something. Fill in the popup window with serial and model #. Hit next and sit back.
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
Click to expand...
Click to collapse
There is an issue with Kies updating if the modem file does not match what its looking for. If you have changed in ROM/rooted, etc there is a chance you have installed a version of the modem it deems unfit...and refused to update.
Follow these instructions to update your Note to the official ICS unrooted AT&T release;
http://forum.xda-developers.com/showthread.php?t=1731654
Yesss....finally did it. All this time i thought kies was supposed to connect to my phone, after reading the above i realized it doesn't (dl mode) all i did was reset flash counter and run the update. Thanks guys
Sent from my SAMSUNG-SGH-I717 using xda premium
Here is the simple way to do it and you can do it through Kies no matter what Firmware you are on.
1: Take battery out and write down the serial number exactly how it is written.
2: Put battery back in and cover back on.
3: Restart phone.
4: Place phone in Download Mode by holdin volume down and power buttons at the same time then when you get to the menu screen it will tell you to press volume up to continue, do that.
5: Run Kies, connect your device and inside Kies click on tools, in the dropdown menu click on Firmware Upgrade And Initialization.
6: In the popup screen type your serial number exactly how it it written under the battery and then type SGHI717 with all caps for the model name.
7: You will get a popup about downloading the firmware upgrade press ok.
8: Another popup will ask you if you agree, check the box about how you read and agree and click start upgrade.
Now Kies will download the firmware upgrade and your device will be upgraded to ICS.
FYI...Need to enter the dash in the model name = SGH-I717
porkenhimer said:
Here is the simple way to do it and you can do it through Kies no matter what Firmware you are on.
1: Take battery out and write down the serial number exactly how it is written.
2: Put battery back in and cover back on.
3: Restart phone.
4: Place phone in Download Mode by holdin volume down and power buttons at the same time then when you get to the menu screen it will tell you to press volume up to continue, do that.
5: Run Kies, connect your device and inside Kies click on tools, in the dropdown menu click on Firmware Upgrade And Initialization.
6: In the popup screen type your serial number exactly how it it written under the battery and then type SGHI717 with all caps for the model name.
7: You will get a popup about downloading the firmware upgrade press ok.
8: Another popup will ask you if you agree, check the box about how you read and agree and click start upgrade.
Now Kies will download the firmware upgrade and your device will be upgraded to ICS.
Click to expand...
Click to collapse
will this wipe out all my data and apps? thanks
Yes it will set everything back to factory. Make sure you backup anything you want to keep beforehand.
ImYourMacDaddy said:
FYI...Need to enter the dash in the model name = SGH-I717
Click to expand...
Click to collapse
The model could also be ATT-I717.
That is capital letter i seven one seven
I bought a LG MyTouch 4G Slide (myTouch Q)
I rooted it, upgraded the software, everything was great.
I was flashing a theme through zip and suddenly, it cut off and now my phone is unresponsive.
The LG splash screen shows twice, followed by displaying the following message:
E:Can't find misc
E:Can't find misc
Finding Update Packages..
E:unknown volume for path [SDCAR
D:/download/(name of the zip file)]
E:Can't mount SDCARD:/(File location)
Installation Aborted.
Factory Reset Failed
Restart Factory Reset
Then the cycle repeats its self.
I cannot access bootloader (power+volume down) no matter how many times I try, it continues to do the same process.
I have searched everywhere and cannot find the answer to this problem, does anyone know how I can make my phone work again?
how'd you upgrade the software? try loading a stock rom either through your computer or sd card, I'm not familiar with the exact process for a slide, but that's what I'd try.
andy55 said:
how'd you upgrade the software? try loading a stock rom either through your computer or sd card, I'm not familiar with the exact process for a slide, but that's what I'd try.
Click to expand...
Click to collapse
I did it the old-fashioned way. Went into settings and searched for updates, then T-Mobile updated me OTA.
The phone worked perfect prior to the theme.
Every file I've put on the sdcard seems to not have any effect on this problem.
Do you know where I can find a stock ROM for LG M4GS? All the one's I've seen around are for HTC.
I downloaded ODIN but it only tells me to connect the phone when it's plugged in via USB.
I'll donate to whoever helps me, really need to fix this issue.
how'd you try to flash the theme? through a custom recovery?
and why did it stop?
did you give hard factory reset a try? (dunno what exactly it resets but it might help, and it might actually be exactly what your phone is trying to do according to the screen output):
http://forum.xda-developers.com/showpost.php?p=20310765&postcount=8
if that does not work, try to at least get some more logcat:
install the android sdk, plug your powered-off-phone into usb, run:
adb logcat
it should start the service and be:
Code:
- waiting for device -
then power the phone and post the output...
good luck
Questions should be asked in Q&A forums, not Development forums.
Thread moved.
florpor said:
how'd you try to flash the theme? through a custom recovery?
and why did it stop?
did you give hard factory reset a try? (dunno what exactly it resets but it might help, and it might actually be exactly what your phone is trying to do according to the screen output):
http://forum.xda-developers.com/showpost.php?p=20310765&postcount=8
if that does not work, try to at least get some more logcat:
install the android sdk, plug your powered-off-phone into usb, run:
adb logcat
it should start the service and be:
Code:
- waiting for device -
then power the phone and post the output...
good luck
Click to expand...
Click to collapse
Attached is a screenshot of the error I receive everytime.
The phone does not stay powered off when USB connected, keeps trying to boot.
After two splash screens, the error screen shows.
I used SDK to obtain the screenshot, but none of the other tools seem to work.
Below I have attached the screenshot.
so did you try the hard reset?
if you did, can you get into recovery mode (supposed to be A [QWERTY] + F [QWERTY] + Vol Down + Pwr) or s/w upgrade mode? (E [QWERTY] + Vol Up + Pwr)
if you can get into either one you're probably ok.
through recovery you can flash whatever, and through s/w upgrade you can use a tool called LG Mobile Update Tool (you wrote about odin, which is a samsung tool for samsung phones. this is apparently the lg equivalent):
download the original 2.3.6 firmware here:
http://forum.xda-developers.com/showthread.php?t=1825818
and do what they say here (its for the mytouch 4g but i guess the process is the same. you might wanna read up on this a bitbefore you do it):
http://forums.acsyndicate.net/showthread.php?5397-Tutorial-KDZ-How-to-update-your-LG-mytouch-4g-(E739)-manually
florpor said:
so did you try the hard reset?
if you did, can you get into recovery mode (supposed to be A [QWERTY] + F [QWERTY] + Vol Down + Pwr) or s/w upgrade mode? (E [QWERTY] + Vol Up + Pwr)
if you can get into either one you're probably ok.
through recovery you can flash whatever, and through s/w upgrade you can use a tool called LG Mobile Update Tool (you wrote about odin, which is a samsung tool for samsung phones. this is apparently the lg equivalent):
download the original 2.3.6 firmware here:
http://forum.xda-developers.com/showthread.php?t=1825818
and do what they say here (its for the mytouch 4g but i guess the process is the same. you might wanna read up on this a bitbefore you do it):
http://forums.acsyndicate.net/showthread.php?5397-Tutorial-KDZ-How-to-update-your-LG-mytouch-4g-(E739)-manually
Click to expand...
Click to collapse
I looked every where for this and hope it does not violate any rules - but wanted to repost so that it might help someone else. Again if it is a violation then I apologize but was just before returning to LG for repair.
If you have a tmobile prepaid LG c800 ( may work with contract phone not Sure) this should un brick your phone. I am not the author and take no credit it came from here :
http://androidforums.com/mytouch-q-...-progress-porting-custom-recovery-over-2.html
1: Download and install Drivers from LG site Mines is C800VL. http://www.lg.com/us/products/documents/LG_OSP2.0_Setup_2.0.07.20111130.exe
2: Download and install LGMobile Support Tool leave open i read it is needed to flash. http://csmg.lgmobile.com:9002/client/app/B2CAppSetup.exe
3: Download the .kdz file Its for C800DG but works for C800VL , C800VL don't have a kdz file at least i don't know i looked every where. V10D_00(C800DG).kdz - 4shared.com - online file sharing and storage - download
4: Open LGMobile Support Tool leave open.
5: Download the Flasher from post one
http://androidforums.com/attachment...s-porting-custom-recovery-over-updater-2-.zip unzip and install msxml.msi included with zip
open KDZ_FW_UPD.exe set to 3GQCT - Smart Phone(WM)
browse for KDZ file (V10D_00(C800DG).kdz)
click lunch software update and you should be in S/W Upgrade mode wait for program to finish if it errors leave phone in update mode and click lunch software update again.
One note make sure to download the correct version, there seems to be several the "LGMobile Support Tool"( file name "B2CAppSetup.exe") one will take you to the LG site and do an automatic update and tell you that your phone is not supported and to contact LG and the - "KDZ_FW_UPD.exe" it will be the one with the "browse for file" on the opening screen, also not sure but on another web site it said to use windows enabler file V 1.1 it will run on the task bar at the bottom as an Icon of the seperate windows tiled, click on this so that it says"on" not postive it is necessary but this how I ran the KDZ file. There is a V10V kdz file but it would not work on mine.
Update: after flashing with kdz - V10D_00 (2.3.4) Reflashed/updated with kdz V10v (2.3.6) would not upgrade OTA or at the lg site.
HELP!!!!!!!!!!!!!!
I recently bought used i717 on Ebay. It is supposed to be unlocked but have not been able to confirm as the standard code does not work. Have not been able to root as superoneclick does not work. Finally got it to connect to Kies but Kies states latest ROM is installed.
When I go to Settings >>> About Phone - Model Number is Samsung SGH-i717, Android Version 2.3.6, Baseband Version T989UVKL1, Kernel version 2.6.35.11, Build number Gingerbread.UCLA1
When I boot up the ATT logo stuff is displayed and there was a bunch of ATT bloatware apps installed, most of which I deleted as I do not use ATT
Don't remember where I was but on one web site about upgrading stated that baseband version should be I717UCLA1, I717UCLF6, or I717UCMB4 before updatingand that It will be I717UCMD3 after the update.
I have discovered that the Baseband Version T989UVKL1 is for an SGH-T989, T-Mobile Samsung Galasy S II, which is probably the reason it won't update through Kies.
I want to upgrade to Jelly Bean 4.1.2.
Have considered Cyangenomod but afraid that with the non-ATT baseband I might brick it.
Any help will be greatly appreciated. I am new to this and it has been very confusing so far.
Edit / Delete Edit Post Quick reply to this message Reply Reply With Quote Reply With Quote Multi-Quote This Message
Look behind the battery and write down the serial number.
Put phone into download mode. Hold volume down and press power. Once you see download screen let go of volume down button.
Plug into pc
Open kies and click "tools - firmware upgrade and initialization".
Type in model number using ALL CAPS, then serial number.
Let it do it's thing.
You will be on the latest stock firmware.
440bro said:
Look behind the battery and write down the serial number.
Put phone into download mode. Hold volume down and press power. Once you see download screen let go of volume down button.
Plug into pc
Open kies and click "tools - firmware upgrade and initialization".
Type in model number using ALL CAPS, then serial number.
Let it do it's thing.
You will be on the latest stock firmware.
Click to expand...
Click to collapse
Have not had any luck with Kies. Phone connects to Kies but will not process the upgrade. Says phone is already at hightest level (not exact wording but I think you can get the picture). Why would Kies work in download mode?
[email protected] said:
Have not had any luck with Kies. Phone connects to Kies but will not process the upgrade. Says phone is already at hightest level (not exact wording but I think you can get the picture). Why would Kies work in download mode?
Click to expand...
Click to collapse
Because in download mode it just see's it as it's device name and serial number. Not what's installed on it.
440bro said:
Because in download mode it just see's it as it's device name and serial number. Not what's installed on it.
Click to expand...
Click to collapse
The recovery worked. My phone is now at 4.1.2 and seemed to be working, at least for a while. Does doing this recovery lock evrything back up? Reason I ask is now when I boot up the phone it will only go to the Emergency Call screen. Have contacted my cell phone service to see if they are having any problems.
I am using a service called PureTalkUSA which uses the ATT network. Not sure if the phone has to be unlocked or not.
[email protected] said:
The recovery worked. My phone is now at 4.1.2 and seemed to be working, at least for a while. Does doing this recovery lock evrything back up? Reason I ask is now when I boot up the phone it will only go to the Emergency Call screen. Have contacted my cell phone service to see if they are having any problems.
I am using a service called PureTalkUSA which uses the ATT network. Not sure if the phone has to be unlocked or not.
Click to expand...
Click to collapse
Once a phone is unlocked, it will never be locked. I would think if it uses an att service it wouldn't need unlocked. Find out what the apn settings are for puretalk and verify that's what you have on the phone. You might have to input them yourself.
NOW I AM REALLY EMBARASSED. IT SEEMS I ENTERED A LOCK CODE AND DID NOT REMEMBER THAT i HAD DONE SO. EVERYTHING SEEMS BACK TO NORMAL AND I GOT THE APN INFO ENTERED.
THANKS FOR ALL YOUR HELP. THE INFO ON HOW TO DO THE EMERGENCY RECOVERY WAS VERY HELPFUL.
Brilliant
440bro said:
Look behind the battery and write down the serial number.
Put phone into download mode. Hold volume down and press power. Once you see download screen let go of volume down button.
Plug into pc
Open kies and click "tools - firmware upgrade and initialization".
Type in model number using ALL CAPS, then serial number.
Let it do it's thing.
You will be on the latest stock firmware.
Click to expand...
Click to collapse
Man if this works you are the man. How long is this supposed to take, like an 10 min or 10 hours? Im currently looking at KIES that is darkend gray. Normal?
At any rate, for this simple advice you get
stimmyvz said:
Man if this works you are the man. How long is this supposed to take, like an 10 min or 10 hours? Im currently looking at KIES that is darkend gray. Normal?
At any rate, for this simple advice you get
Click to expand...
Click to collapse
It depends on your computer performance, and internet connection speed. It has to download the latest firmware from the net. Then it has to install it. First time it could take up to an hour. The second time could take 20 minutes because the firmware will be downloaded from the first time.
440bro said:
It depends on your computer performance, and internet connection speed. It has to download the latest firmware from the net. Then it has to install it. First time it could take up to an hour. The second time could take 20 minutes because the firmware will be downloaded from the first time.
Click to expand...
Click to collapse
When I updated mine it took between 45-60 minutes.
[email protected] said:
When I updated mine it took between 45-60 minutes.
Click to expand...
Click to collapse
About the same last time I did this. My twc service is about 2.7mb D/L.
Hello.
I was trying to install a treble rom on my p20 lite and suddenly after flashing i needed to flash stock recovery to make the stock wipes.
I did.
The rom started but with no keyboard. I couldnt pass google part to get to the rom menu.
Ok.
I decided to flash it again.
I did. But this time, the rom never started and i was with stock erecovery, so couldnt flash again.
I went to flash twrp but FRP is LOCKed. Bootloader unlocked, obviously. And bc of that i cant flash ANYTHING.
Tried to flash system, twrp, anything. I cant. Says FRP lock.
Tried to lock bootloader and relock again: I cant. It says it needs to unlock FRP before.
Tried DC PHOENIX, didn't work on my p20.
Scrolled all google and xda for help, nothing.
Tried erecovery stock rom installation. It downloads the files but never installs, i've spent 5 hours waiting for it to go off the 0%. Nothing happens.
Already made erecovery wipe data/cache. Nothing.
Can someone please help me?
Hi there
Can you tell what's your build number if you already knew before this happened?
Also, right now your only hope is your Stock Recovery so let's focus on that:
Please try to download and install the official ROM via the eRecovery a couple of times and connect it to the best Wifi you have.
Do you have bootloader "unlocked" or "locked" right now?
FRP is locked so no changes possible yup.
If you have your bootloader "locked" not "relocked" you have warranty and you can send it to a customer repair center and they can solve it for you.
With the methods we know it's pretty much impossible, altough try this via fastboot command line:
fastboot erase config
then
fastboot reboot
If this does not do it then try with DC-Unlocker software via this link https://www.dc-unlocker.com/huawei-android-phone-frp-unlock
Sorry for insisting,
Best of hopes,
AS
ars_chelsea said:
Hi there
Can you tell what's your build number if you already knew before this happened?
Also, right now your only hope is your Stock Recovery so let's focus on that:
Please try to download and install the official ROM via the eRecovery a couple of times and connect it to the best Wifi you have.
Do you have bootloader "unlocked" or "locked" right now?
FRP is locked so no changes possible yup.
If you have your bootloader "locked" not "relocked" you have warranty and you can send it to a customer repair center and they can solve it for you.
With the methods we know it's pretty much impossible, altough try this via fastboot command line:
fastboot erase config
then
fastboot reboot
If this does not do it then try with DC-Unlocker software via this link https://www.dc-unlocker.com/huawei-android-phone-frp-unlock
Sorry for insisting,
Best of hopes,
AS
Click to expand...
Click to collapse
Hey, thanks for the answer.
My build number (ane-lx3 c605 b149)
I tried for like 10 times already to install the firmware from erecovery but it refuses to leave the 0% when installing... Ive waited more than 5 hours already.
When trying these fastboot command lines, i got this: https://imgur.com/a/hrSB8iK
Dc also didnt worked for me, i think it doesnt support my phone model?
Bc i can't find it in the list of phone model in the software also tried with similar and doesnt work.
My bootloader is unlocked, i guess warranty wont solve my problem bc of that :crying:
Thanks again for tryna help!
you need sd card
download this file: https://androidhost.ru/cBe
unzip this file, inside software folder are dload folder, coppy that to sd card
put sd card in phone
pres vol+ and vol- and power button (need atlest 50% batery)
give a try.
Arnys said:
you need sd card
download this file: https://androidhost.ru/cBe
unzip this file, inside software folder are dload folder, coppy that to sd card
put sd card in phone
pres vol+ and vol- and power button (need atlest 50% batery)
give a try.
Click to expand...
Click to collapse
He/She does need a micro sd card adapter for that to connect to the pc or use it on another phone and then copy the files.
Yeah I forgot about that I guess XD
Cheers,
AS
ars_chelsea said:
He/She does need a micro sd card adapter for that to connect to the pc or use it on another phone and then copy the files.
Yeah I forgot about that I guess XD
Cheers,
AS
Click to expand...
Click to collapse
Arnys said:
you need sd card
download this file: https://androidhost.ru/cBe
unzip this file, inside software folder are dload folder, coppy that to sd card
put sd card in phone
pres vol+ and vol- and power button (need atlest 50% batery)
give a try.
Click to expand...
Click to collapse
Thank you, guys.
I tried this method just now but after a time with EMUI logo in the screen it said software install failed!
I guess im really lost. :crying:
fcknumb said:
Thank you, guys.
I tried this method just now but after a time with EMUI logo in the screen it said software install failed!
I guess im really lost. :crying:
Click to expand...
Click to collapse
Hey
Did you try the official guide of @Merlin_99?
If not check his thread here: https://forum.xda-developers.com/huawei-p20-lite/how-to/root-how-to-install-update-t3841557
That's the official way to do it
Cheers,
AS
ars_chelsea said:
Hey
Did you try the official guide of @Merlin_99?
If not check his thread here: https://forum.xda-developers.com/huawei-p20-lite/how-to/root-how-to-install-update-t3841557
That's the official way to do it
Cheers,
AS
Click to expand...
Click to collapse
Thanks for your reply and still tryna help me.
As i see, the only thing i didnt do from the official guide is this part:
"Finally, enter to the project menu from dialer typing *#*#2846579#*#* ==> Software Upgrade ==> SdCard Upgrade."
That i cant do cause my phone is systemless and i cant turn it on to use dialer :crying:
fcknumb said:
Thanks for your reply and still tryna help me.
As i see, the only thing i didnt do from the official guide is this part:
"Finally, enter to the project menu from dialer typing *#*#2846579#*#* ==> Software Upgrade ==> SdCard Upgrade."
That i cant do cause my phone is systemless and i cant turn it on to use dialer :crying:
Click to expand...
Click to collapse
Okay then.
It should work though did you put the dload folder into the root your sd card and then power on button + Volume buttons at the same time while powering on?
Cheers,
AS
ars_chelsea said:
Okay then.
It should work though did you put the dload folder into the root your sd card and then power on button + Volume buttons at the same time while powering on?
Cheers,
AS
Click to expand...
Click to collapse
Right bae, its like that into my sdcard: 1. http://prntscr.com/lx74xt 2. http://prntscr.com/lx7im7
And yes, i did pressed power and + - volume buttons at same time!
Thank you for not giving up.
fcknumb said:
Right bae, its like that into my sdcard: 1. http://prntscr.com/lx74xt 2. http://prntscr.com/lx7im7
And yes, i did pressed power and + - volume buttons at same time!
Thank you for not giving up.
Click to expand...
Click to collapse
Hi again
This is really weird... This one should work... Did you download the right version of your build? example: 8.0.0.162(C432)
And try to find the latest version of your build and via your model example: ANE-LX1 which is on the back of the phone with small letters or on the box
Cheers,
AS
ars_chelsea said:
Hi again
This is really weird... This one should work... Did you download the right version of your build? example: 8.0.0.162(C432)
And try to find the latest version of your build and via your model example: ANE-LX1 which is on the back of the phone with small letters or on the box
Cheers,
AS
Click to expand...
Click to collapse
Yeah, i did it all right.
So sad...
fcknumb said:
Yeah, i did it all right.
So sad...
Click to expand...
Click to collapse
Remote instructions are not the best for these problems, so try to get a person on your country which knows some stuff and can help you out there