I just did the htc method for hboot 1.5 and keep reading problems people are having with roms. I just want to know what rom is the most stable and everything works for hboot 1.5.
Roms will run the same on both boot loaders just so you flash using fast boot.
Sent from my HTC EVO 3D using Tapatalk
Try ViperRom for stability. The ROM is more stable than the official sense.
Try the blackened rom or just anything by xsmagical. All of his are stable and smooth!
hboot won't matter with how stable a ROM is. If you want speed along with stability, flash Myn's Warm TwoPointThree RLS1. Super smooth, super sexy, and super stable. Never had a random reboot or any nonsense like that with his ROM. That was a the first one I flashed when I came over from the OG Evo forum, since I ran his ROM when we had Froyo.
Everyone says they are the same but there are a few ROMs that even say that the 1.5 won't work with 4g and some other features.
I was working great on stock rooted rom but then i decided i wanted to overclock so i installed WTSB which said it was able to be overclocked. Using set cpu it would only go to 1188mhz. I was getting great 3g downloads (2.5meg down, 1.5 up). I flashed a couple different kernels and for some reason it only shows 1024mhz now in set cpu.
So i went back to the full factory restore and did a re-install of the WTSB so it's rom would be installed so i could get back to 1188mhz and now it too reads only 1024mhz with set cpu. something is going wrong. My data speeds are crazy slow now too.
jeffbinder said:
Everyone says they are the same but there are a few ROMs that even say that the 1.5 won't work with 4g and some other features.
I was working great on stock rooted rom but then i decided i wanted to overclock so i installed WTSB which said it was able to be overclocked. Using set cpu it would only go to 1188mhz. I was getting great 3g downloads (2.5meg down, 1.5 up). I flashed a couple different kernels and for some reason it only shows 1024mhz now in set cpu.
So i went back to the full factory restore and did a re-install of the WTSB so it's rom would be installed so i could get back to 1188mhz and now it too reads only 1024mhz with set cpu. something is going wrong. My data speeds are crazy slow now too.
Click to expand...
Click to collapse
Data speeds have nothing to do with a ROM. If anything, a PRL effects it.
moosh3 said:
Data speeds have nothing to do with a ROM. If anything, a PRL effects it.
Click to expand...
Click to collapse
thanks
any idea about set cpu being crazy now? not only can i not overclock on this "overclockable rom/kernel" i'm not even at stock speed anymore.
Eternity Rom
I've tried many roms for my EVO 3 d...I keep ending back at the eternity ROM. (sense 3.0) This has become the ROM that I rely upon daily. Lots of other great roms out there,but with this ROM...everything works very well. No bugs,and great battery life. Just my opinion, definitely something to look into. Good luck.
My fiancee was running inbREDed rom, and loved it. I now have her Evo 3D and i cant stay away from it either, it is a fantastic, smooth, really really pretty, rom.
Edit: He is also extremely receptive to, and heartily welcomes, any advice, fixes, ideas, and suggestions. Not saying the other devs don't, but he has responded to my questions and requests within minutes, at the latest a few hours.
I ran MIUI for a little while, and it was the most stable ROM I have used... However, you do lose 4G and 3D.
moosh3 said:
Data speeds have nothing to do with a ROM. If anything, a PRL effects it.
Click to expand...
Click to collapse
UGH! This is completely inaccurate. It is not possible for PRL to affect your data speed. PRL is Priority Roam List. It is merely a host list file for where towers are located. It is MORE possible (although not very likely) that a ROM could affect your data speed IF that ROM uses some kind of proxy that isn't standard to the device's carrier. Highly unlikely but I have seen it happen. But the PRL has NOTHING to do with data speed. Radio versions have been claimed to affect speed, but I would bet that most of those scenarios are coincidental.
WTF?
edufur said:
UGH! This is completely inaccurate. It is not possible for PRL to affect your data speed. PRL is Priority Roam List. It is merely a host list file for where towers are located. It is MORE possible (although not very likely) that a ROM could affect your data speed IF that ROM uses some kind of proxy that isn't standard to the device's carrier. Highly unlikely but I have seen it happen. But the PRL has NOTHING to do with data speed. Radio versions have been claimed to affect speed, but I would bet that most of those scenarios are coincidental.
Click to expand...
Click to collapse
Are you kidding me? A ROM can affect data speeds sure, just like too much salt in your diet affects your blood pressure... The PRL of a device affects the entire radio/modem of the device, by telling it which towers it can connect to and which ones are PRIORITY when using mobile data, talk, etc. This is why when I run PRL 00001 I get 3G in area's where I never had it before, or even running 61XXX (any sprint based prl) I get slower 3g speeds, less signal, etc. Your PRL is just part of the overall package that affects your data speed. In all reality, a ROM has less affect on your data speed than a PRL...
What options are there for ROMs that have the 3D and 4G working? would like an AOSP if possible.
Bob
There are currently no AOSP ROMs with 3D or 4G.
Same goes for sense 3.5
You can run a ROM of your choice and run the de-sensify patch however which is as close as you can get and have both 3D and 4G working.
Sent from my PG86100 using XDA App
i updated my PRL and it's back to the faster speeds now again. Sprint must have updated our towers because the speeds are definitely fast now.
loveableterrorepic4g said:
Are you kidding me? A ROM can affect data speeds sure, just like too much salt in your diet affects your blood pressure... The PRL of a device affects the entire radio/modem of the device, by telling it which towers it can connect to and which ones are PRIORITY when using mobile data, talk, etc. This is why when I run PRL 00001 I get 3G in area's where I never had it before, or even running 61XXX (any sprint based prl) I get slower 3g speeds, less signal, etc. Your PRL is just part of the overall package that affects your data speed. In all reality, a ROM has less affect on your data speed than a PRL...
Click to expand...
Click to collapse
The chances of this are highly LOW. Unless the PRL version comparison is around 10 revisions. The chance of a PRL update targeting any specific user is very low (although there always has to be some)... but it is NEVER the PRL version itself that affects speeds. IF your PRL happens to point you to a newer tower with quicker speed (also not highly likely since Sprint intentionally load balances), then you MIGHT see an improvement. But again, the version itself has nothing to do with it... and the likelihood of any specific change affected any specific user is extremely low.
Related
So I am a proud owner of the Thunderbolt now and I am loving this phone a lot. I’ve moved over from the Sprint EVO. I was rooted since day 1 with that phone. I ran CM7… and while my overall phone and speed test were faster than the stock phones in the house… I still seemed to have constant issues… be it from the phone itself or the network.
Of course I can’t leave well enough alone with this phone. I wanted to put Gingerbread on it (it still has 2.2 WTF?!) and I wanted to put Sense 2.1/3.0 on it. So I successfully rooted (WOW that was easy) and installed clockwork recovery. I decided on SHIFTS3NS3 V1.4F as it seems to have exactly what I want (I kind of don’t want to go back to CM7, everyone claims they have no signal issues but I am sure they do, especially when my Sense loaded Evo could get 4G where CM7 could/would not).
So BEFORE I rooted or did anything, I did several speed test throughout my home and work. Smooth scaling and great speeds. After rooting and installing Shifts3ns3, I started running test. My speeds dropped… and now I was seeing “skipping” with the speed test (gets to a point, stops, drops, stutters going back up, drops again, etc). So I get to work this morning and the speed test is doing the same here. I did a nandroid backup of my stock set up last night before I installed the new ROM… restored it this morning… and ran the test at work again… lo and behold I am getting faster speeds and no stuttering.
So perhaps a radio issue? I noticed there are Froyo radios and GB radios (http://forum.xda-developers.com/showthread.php?t=1048128)... When installing the GB ROM does it update the radios? Was I running Froyo radios on a GB rom and is that bad? Should I try upgrading to the latest GB radios and run test again? Does any of this Rom switching/radio switching affect the simultaneous voice and data ability (that’s actually huge for me and the main reason I got this phone)?
I appreciate any help. I’ve been a XDA board reader with EVO since 11-2010… so while everything is familiar to me… this all seems different with the Thunderbolt.
First off I would upgrade to the latest radio. Although these are *beta* radios, they work much better than the stock radios.
Second, after installing the latest radio try, Bamf 2.4.1. Just like you I like staying close to stock, but like extra elements with my ROM. To me Gingeritis is just too far from stock, plus the Carousel home screen is a pain in the ass. Bamf 2.4.1 is just stock with sense 3.0 weather and lockscreen, and without the location icon in the status bar.
Also, my speedtest on Bamf 2.4.1 was a straight shot. No drop offs what so ever.
And, of course this is all just my opinion but I strongly believe that Bamf 2.4.1 is what you want.
miketoasty said:
First off I would upgrade to the latest radio. Although these are *beta* radios, they work much better than the stock radios.
Second, after installing the latest radio try, Bamf 2.4.1. Just like you I like staying close to stock, but like extra elements with my ROM. To me Gingeritis is just too far from stock, plus the Carousel home screen is a pain in the ass. Bamf 2.4.1 is just stock with sense 3.0 weather and lockscreen, and without the location icon in the status bar.
Also, my speedtest on Bamf 2.4.1 was a straight shot. No drop offs what so ever.
And, of course this is all just my opinion but I strongly believe that Bamf 2.4.1 is what you want.
Click to expand...
Click to collapse
Reading up on their site now
Quick question, since I am on page 10 and not seeing this answer... what is the difference between ADR and non ADR? He mentioned on page one that its "Adrynalyne. Its what I made according to my own wants"... but I am not sure what that means LOL. Only reason I am concerned is that there still seems to be a sense 3.0 lock screen bug that someone said is a known bug and to flash the non ADR version.
miketoasty said:
First off I would upgrade to the latest radio. Although these are *beta* radios, they work much better than the stock radios.
Second, after installing the latest radio try, Bamf 2.4.1. Just like you I like staying close to stock, but like extra elements with my ROM. To me Gingeritis is just too far from stock, plus the Carousel home screen is a pain in the ass. Bamf 2.4.1 is just stock with sense 3.0 weather and lockscreen, and without the location icon in the status bar.
Also, my speedtest on Bamf 2.4.1 was a straight shot. No drop offs what so ever.
And, of course this is all just my opinion but I strongly believe that Bamf 2.4.1 is what you want.
Click to expand...
Click to collapse
Gingeritis doesn't have a carousel home screen. Gingeritis3D does.
meteron said:
Reading up on their site now
Quick question, since I am on page 10 and not seeing this answer... what is the difference between ADR and non ADR? He mentioned on page one that its "Adrynalyne. Its what I made according to my own wants"... but I am not sure what that means LOL. Only reason I am concerned is that there still seems to be a sense 3.0 lock screen bug that someone said is a known bug and to flash the non ADR version.
Click to expand...
Click to collapse
The ADR version uses elements of sense 3.0 while the normal version is basically stock. You want the adr version.
meteron said:
So I am a proud owner of the Thunderbolt now and I am loving this phone a lot. I’ve moved over from the Sprint EVO. I was rooted since day 1 with that phone. I ran CM7… and while my overall phone and speed test were faster than the stock phones in the house… I still seemed to have constant issues… be it from the phone itself or the network.
Of course I can’t leave well enough alone with this phone. I wanted to put Gingerbread on it (it still has 2.2 WTF?!) and I wanted to put Sense 2.1/3.0 on it. So I successfully rooted (WOW that was easy) and installed clockwork recovery. I decided on SHIFTS3NS3 V1.4F as it seems to have exactly what I want (I kind of don’t want to go back to CM7, everyone claims they have no signal issues but I am sure they do, especially when my Sense loaded Evo could get 4G where CM7 could/would not).
So BEFORE I rooted or did anything, I did several speed test throughout my home and work. Smooth scaling and great speeds. After rooting and installing Shifts3ns3, I started running test. My speeds dropped… and now I was seeing “skipping” with the speed test (gets to a point, stops, drops, stutters going back up, drops again, etc). So I get to work this morning and the speed test is doing the same here. I did a nandroid backup of my stock set up last night before I installed the new ROM… restored it this morning… and ran the test at work again… lo and behold I am getting faster speeds and no stuttering.
So perhaps a radio issue? I noticed there are Froyo radios and GB radios (http://forum.xda-developers.com/showthread.php?t=1048128)... When installing the GB ROM does it update the radios? Was I running Froyo radios on a GB rom and is that bad? Should I try upgrading to the latest GB radios and run test again? Does any of this Rom switching/radio switching affect the simultaneous voice and data ability (that’s actually huge for me and the main reason I got this phone)?
I appreciate any help. I’ve been a XDA board reader with EVO since 11-2010… so while everything is familiar to me… this all seems different with the Thunderbolt.
Click to expand...
Click to collapse
i came from the evo too so welcome. IMO the reason people are having soo many data issues is not from the radios but from the 2.3.5 build that was meant for the nexus s phone. 2.3.4 doesn't have those kinds of problems. just my 2 cents!
fixxxer2008 said:
i came from the evo too so welcome. IMO the reason people are having soo many data issues is not from the radios but from the 2.3.5 build that was meant for the nexus s phone. 2.3.4 doesn't have those kinds of problems. just my 2 cents!
Click to expand...
Click to collapse
I'm inclined to agree.
loonatik78 said:
I'm inclined to agree.
Click to expand...
Click to collapse
if i could find a decent 2.3.4 aosp build id jump on it. the only thing keeping me from sense is the low volume issues.
fixxxer2008 said:
if i could find a decent 2.3.4 aosp build id jump on it. the only thing keeping me from sense is the low volume issues.
Click to expand...
Click to collapse
Low volume in call? Geeze... I wish I could turn it down! Gingeritis3D is blaring loud. I never use it more than half way up.
Thanks everyone for the responses!
I guess I am just scared to do anything to mess up my phone. I trouble shot and tinkered with the Evo so much so often.
Right now the phone works. And works great. I just wanna help the battery life some... and remove Verizons bloatware.
It seems the Thunderbolt handles radios differently depending on the build? With the Evo I would just flash a radio and I could bounce around from sense to AOSP, froyo to GB, and it wouldnt matter. The thunderbolt has MR2 radios... Froyo radios... GB radios. So my last question here is... right now I am on stock. If I go to a GB based rom, do I flash the radio first? And if I go back to the stock rom, do I flash the MR2 radios first (my phone updated to 1.70.605.0 while it was being set up in the store) then flash back to stock? Basically do the radios persist throughout the builds and I flash them according to what ROM I am using?
Thanks again.
meteron said:
Thanks everyone for the responses!
I guess I am just scared to do anything to mess up my phone. I trouble shot and tinkered with the Evo so much so often.
Right now the phone works. And works great. I just wanna help the battery life some... and remove Verizons bloatware.
It seems the Thunderbolt handles radios differently depending on the build? With the Evo I would just flash a radio and I could bounce around from sense to AOSP, froyo to GB, and it wouldnt matter. The thunderbolt has MR2 radios... Froyo radios... GB radios. So my last question here is... right now I am on stock. If I go to a GB based rom, do I flash the radio first? And if I go back to the stock rom, do I flash the MR2 radios first (my phone updated to 1.70.605.0 while it was being set up in the store) then flash back to stock? Basically do the radios persist throughout the builds and I flash them according to what ROM I am using?
Thanks again.
Click to expand...
Click to collapse
The latest radio's available will work with all ROM's out right now (Including the latest Froyo ROM's).
If I remember correctly you should be okay to just flash the ROM (No need to flash the new radio as MR2 works with both GB and Froyo).
The Radio's persist through everything except a RUU or PG05IMG.zip flash (Depending on what you are flashing of course).
miketoasty said:
The latest radio's available will work with all ROM's out right now (Including the latest Froyo ROM's).
If I remember correctly you should be okay to just flash the ROM (No need to flash the new radio as MR2 works with both GB and Froyo).
The Radio's persist through everything except a RUU or PG05IMG.zip flash (Depending on what you are flashing of course).
Click to expand...
Click to collapse
OK so it IS like the Evo then. The radio thread isnt stating that they are Froyo/GB radios... but where the radios got pulled FROM. I was totally reading it wrong.
Thank you for the clarification!
I have had my Thunderbolt for over a year now and have been flashing numerous ROM's/radios since. I have always had great success in each one and as time has passed, newer and better ROM's having been coming out. I currently have the Full Blown Thunderstick ROM which I have found to be the best and smoothest ROM to date. There is only one probem.
I have noticed a drastic difference in the speeds while using this ROM/radio compared to all the ones used prior. I have flashed this ROM and it's respective radio on my Thunderbolt and numerous others and I still have the same issues with all. Can someone tell me why I went from 15mb down/7 mb up speeds which I had prior to now 3-4 mb down/.5-1mb up speeds with this MR4 setup? Also, why won't the ROM let me use the Wireless Tether for Root Users in addition to the Wi-Fi Hotspot one it came with? When I try to run and connect to it from any laptop, it says it's unable to connect the network address although I have no problem connecting to the Wi-Fi Hotspot one. But sometimes with the Wi-Fi Hotspot the ROM came with, it drops connectivity. It feels like it's not using the 4G LTE speeds but only the 3G speeds only.
Just curious, did you search first? The answer for wifi tether has been posted atleast 100 times. I posted it as recently as 2 days ago. As far as speeds, speedtest.net does not work properly with that rom, your info is not correct.
Sent from my ADR6400L using XDA
Oh I read the whole thread and I didnt really see anything that answered these questions. Im not going with speedtest.net. Im judging it based on certain websites and web-based programs which are now slower since I installed the ROM.
Did you try Barnacle? I haven't used the ROM you have, I run Liquid.
Most people claim that Wireless Tether works great with Liquid, but I couldn't get it to work. Once I used Barnacle, it not only worked, but I've been getting great speeds with it.
You need to run Imoseyon's kernel to fix the speed issue. It's been widely documented and discussed in almost every MR4 rom thread.
I'vd had the lean kernel flashed since the beginning and still no change in speeds
IMO kernal
tigerfdny said:
I'vd had the lean kernel flashed since the beginning and still no change in speeds
Click to expand...
Click to collapse
which IMO kernel are you using? I believe for mr4 you want v5.2.0. I have it if you cant find a link. pm me
i am using v6.1.0 which was documented to use
I don't know why everyone is claiming that these 3 radio packages enable 3G on the i717. I've tried all 3 and twice each from different sources. I CWM the ATT radio back on it and it's returned to 2G.
I would've bought the N7000 and not taken the risk on an international sim not liking all the hackdoolery going on in my phone. Now I have that concern PLUS I'm not getting the 3G that was the deciding factor in the N7000/i717 decision.
Any thoughts? Perhaps I am missing a setting or something? All I get with the 3 non ATT radios is a little x in the greyed out signal meter /|
If you followed the directions correctly you should be getting 4G on the 1700 band. It does work because I am currently using it. Maybe your area has bad signal?
hmmm
It probably does work. The signal is 2G 5 bars, this is elevated in Manhattan, there's always good signals from all carriers. The meter reads /x| though. I tried the only available settings after installing each of the radios, GSM or GSM/LTE and perhaps one other.
I lose the IMEI with the non ATT radios. No signal. Nothing. As soon as I flash ATT it goes to 5 bars of wonderfully slow 2G...
I've finally got settings, accounts and apps installed so I might try flashing a radio again but I'm exhausted of much else.
I really don't know what could be wrong. Perhaps its the wicked humidity and the lingering high toxicity thick gaseous farts making the air heavy and my mind less clear. It really screws up my zen.
neko_tensai said:
It probably does work. The signal is 2G 5 bars, this is elevated in Manhattan, there's always good signals from all carriers. The meter reads /x| though. I tried the only available settings after installing each of the radios, GSM or GSM/LTE and perhaps one other.
I lose the IMEI with the non ATT radios. No signal. Nothing. As soon as I flash ATT it goes to 5 bars of wonderfully slow 2G...
I've finally got settings, accounts and apps installed so I might try flashing a radio again but I'm exhausted of much else.
I really don't know what could be wrong. Perhaps its the wicked humidity and the lingering high toxicity thick gaseous farts making the air heavy and my mind less clear. It really screws up my zen.
Click to expand...
Click to collapse
What ROM are you using with the modems? I am on OnlyOne B4 with KID ICS modem from tspx23. I'm getting 3g speeds. It makes a difference what ROM you are on because of the UCLD or UCLE based ROM. There are a lot of different modems for ICS but make sure you got the right one for the right ROM. You should at the very least get above EDGE speeds.
......
Android 4.0.4
kernel version
3.0.8-perf-I717UCLE3-CL577875
cYANOGENmOD
H0TW1R3.R5-9.0.0-rc0-QUINCYATT-unofficial
Build imm761.ucle3
The radios were from xda and another site. its on stock radio now. If you could refer me to the radio I need, I'll give it a try. I'm unsure about doing it before the weekend as this caused 1 day of downtime midweek so.... I need to get busy! I'll give it a whirl this weekend unless I feel brave this evening.
The leaked sll radio or the blaze 4g found in this thread should work...I'm in NY and they work fine, just not 100% stable
http://forum.xda-developers.com/showthread.php?t=1573568
Sent from my SAMSUNG-SGH-I717 using XDA
neko_tensai said:
Android 4.0.4
kernel version
3.0.8-perf-I717UCLE3-CL577875
cYANOGENmOD
H0TW1R3.R5-9.0.0-rc0-QUINCYATT-unofficial
Build imm761.ucle3
The radios were from xda and another site. its on stock radio now. If you could refer me to the radio I need, I'll give it a try. I'm unsure about doing it before the weekend as this caused 1 day of downtime midweek so.... I need to get busy! I'll give it a whirl this weekend unless I feel brave this evening.
Click to expand...
Click to collapse
You are using an UCLE3 ROM but to my knowledge, all the modems that are out are for UCLE2. I know it's troublesome, but I would suggest trying a new ROM based off of UCLE2 or even gingerbread to see if you can get a nice full speed 3g on Tmobile. That way at least you know the hardware and radio is good. I like AOKP, but for now I'm using OnlyOne B4 (B5 should be out tonight with some more Galaxy S3 goodies) See my signature.
This is Jeet92's version for ICS (works with UCLE2)
http://forum.xda-developers.com/showthread.php?t=1573568
This is Tspx23's version for ICS (works with UCLE2)
http://forum.xda-developers.com/showthread.php?t=1679722
......
That works much better than the stock radio.
I feel very stupid for paying $924 for that iPhone 4S 64GB factory unlocked that I had since December. It was cool getting it direct from Foxconn though.
This makes everything ok. Thank you.
deliriousbb said:
You are using an UCLE3 ROM but to my knowledge, all the modems that are out are for UCLE2. I know it's troublesome, but I would suggest trying a new ROM based off of UCLE2 or even gingerbread to see if you can get a nice full speed 3g on Tmobile. That way at least you know the hardware and radio is good. I like AOKP, but for now I'm using OnlyOne B4 (B5 should be out tonight with some more Galaxy S3 goodies) See my signature.
This is Jeet92's version for ICS (works with UCLE2)
http://forum.xda-developers.com/showthread.php?t=1573568
This is Tspx23's version for ICS (works with UCLE2)
http://forum.xda-developers.com/showthread.php?t=1679722
Click to expand...
Click to collapse
There is no UCLE3 as far as I know
.....
It is UCLE3.
Whatever this variant it is, it doesn't have Japanese language support. The SIP support is also gone, I saw another poster mention that too. Its stripped of all the good stuff.
This is certainly not the CM I had on the Evo 4G.... The options on that CM were extensive to say the least. It gave one the best attempt at absolute control of every aspect of the device.
By comparison, the CM9 I have on this Note is only a slight deviation from the stock OS. I'm guessing that all the efforts at custom ROMs are getting rather diverse over the years, or perhaps this one is just not as good as the mainstream ones? I noticed how many models of Android there are as opposed to when it was just the Evo and a couple others, it's definitely had an effect...
Perhaps the best way to describe it is quality verses quantity. The collective "milk" intellect of all the dev's is no longer in the milk jug, it is now spread throughout several hundred coffee cups, very, very diluted.
Please sir, may I have some more? For the Galaxy Note i717???!!!
I noticed my 3g speeds were about double or better immediately after i flashed a sense 4 rom (one shot). Up to this point i was leery of using a rom with no wimax, but this changed my mind. Has anyone else seen increased speeds that's running a sense 4 rom?
woody296 said:
I noticed my 3g speeds were about double or better immediately after i flashed a sense 4 rom (one shot). Up to this point i was leery of using a rom with no wimax, but this changed my mind. Has anyone else seen increased speeds that's running a sense 4 rom?
Click to expand...
Click to collapse
I haven't noticed any 3G speed increases. The closest 4G tower is a hour away, so I can't comment on that. As far as overall speed though, it's probably entirely dependent on the ROM. I went back to a GB based ROM (Mean 4.5) because it seems faster and more stable than the ICS ROMS I've used.
woody296 said:
I noticed my 3g speeds were about double or better immediately after i flashed a sense 4 rom (one shot). Up to this point i was leery of using a rom with no wimax, but this changed my mind. Has anyone else seen increased speeds that's running a sense 4 rom?
Click to expand...
Click to collapse
Some developers do tweak data settings that the radio interface daemon uses to tell the rom when and how to request data. I would put money on it that HTC didn't put the effort into Sense 4 to make it more data efficient. Could be a coincidence that the tower(s) in ur area are performing at full 100% but i doubt the later.
Gonna flash a 4.0 Rom to test this
woody296 said:
I noticed my 3g speeds were about double or better immediately after i flashed a sense 4 rom (one shot). Up to this point i was leery of using a rom with no wimax, but this changed my mind. Has anyone else seen increased speeds that's running a sense 4 rom?
Click to expand...
Click to collapse
Which ROM did you flash? I've tried several ICS roms and the overall user experience is faster including web browsing on 3G. That could be related to the many tweaks that the developers employ.
The latest ICS I tried was Cool ICS v5. It was probably the most complete ICS Rom i've tried. Everything works. I switched back to GB because it could not do tethering.
One shot alpha, at this time you can't hook to pc and use as a disc drive after Rom is installed so might be good to have another Rom on sdcard to flash to later.
acevo3d said:
Which ROM did you flash? I've tried several ICS roms and the overall user experience is faster including web browsing on 3G. That could be related to the many tweaks that the developers employ.
The latest ICS I tried was Cool ICS v5. It was probably the most complete ICS Rom i've tried. Everything works. I switched back to GB because it could not do tethering.
Click to expand...
Click to collapse
Tethering works fine on all ICS roms, with "wifi tether" app, it does require two settings, the profile should be set to "Generic ICS" and then check that "Routing Fix" is enabled, these settings are specific to the Evo 3D on ICS
USB tethering.. well idk about that. PDANET and FoxFi can likely do that.
I was just wondering, Ive ran a couple different ROMS lately based on the newest leak and it seems that my 4G signal is not as good. I see 3g more it seems to even get stuck in 3g for periods of time for no apparent reason and doesn't seem to change as fast.
Now with the current ROM I'm running its a bit better, but still I'm on 3g where I got 4g before. I was just wondering if a different kernel would have any effect on this. Im not really sure it would because the kernel controls the processor and battery, stuff like that doesn't it? Radios control signal. Im wondering if the issue may be 3g/4g switching though and not an actual issue with signal.
I'm really not sure about any of it
loki993 said:
I was just wondering, Ive ran a couple different ROMS lately based on the newest leak and it seems that my 4G signal is not as good. I see 3g more it seems to even get stuck in 3g for periods of time for no apparent reason and doesn't seem to change as fast.
Now with the current ROM I'm running its a bit better, but still I'm on 3g where I got 4g before. I was just wondering if a different kernel would have any effect on this. Im not really sure it would because the kernel controls the processor and battery, stuff like that doesn't it? Radios control signal. Im wondering if the issue may be 3g/4g switching though and not an actual issue with signal.
I'm really not sure about any of it
Click to expand...
Click to collapse
The kernel shouldn't make a difference. Did you upgrade your radios to the latest leak?
I have this problem with the latest leak radios. I actually went back to gb radios because of it.
On the past few ics leaks I spent more time in 3g than anything.
Sent from my ADR6425LVW using xda app-developers app